Enzyme-activated intracellular drug delivery with tubule clay nanoformulation

Tubule Nanoclay-Organic Heterostructures for Biomedical Applications

Natural halloysite nanotubes (HNTs) show unique hollow structure, high aspect ratio and adsorption ability, good biocompatibility, and low toxicity, which allow for various biomedical applications in the diagnosis and treatment of diseases. Here, advances in self-assembly of halloysite for cell capturing and bacterial proliferation, coating on biological surfaces and related drug delivery, bone regeneration, bioscaffolds, and cell labeling are summarized. The in vivo toxicity of these clay nanotubes is discussed. Halloysite allows for 10-20% drug loading and can extend the delivery time to 10-100 h. These drug-loaded nanotubes are doped into the polymer scaffolds to release the loaded drugs. The rough surfaces fabricated by self-assembly of the clay nanotubes enhance the interactions with tumor cells, and the cell capture efficacy is significantly improved. Since halloysite has no toxicity toward microorganisms, the bacteria composed within these nanotubes can be explored in oil/water emulsion for petroleum spilling bioremediation. Coating of living cells with halloysite can control the cell growth and is not harmful to their viability. Quantum dots immobilized on halloysite were employed for cell labeling and imaging. The concluding academic results combined with the abundant availability of these natural nanotubes promise halloysite applications in personal healthcare and environmental remediation.

Characterization of drug delivery vehicles using atomic force microscopy: current status

INTRODUCTION

The field of nanomedicine, utilizing nano-sized vehicles (nanoparticles and nanofibers) for targeted local drug delivery, has a promising future. This is dependent on the ability to analyze the chemical and physical properties of these drug carriers at the nanoscale and hence atomic force microscopy (AFM), a high-resolution imaging and local force-measurement technique, is ideally suited.

AREAS COVERED

Following a brief introduction to the technique, the review describes how AFM has been used in selected publications from 2015 to 2018 to characterize nanoparticles and nanofibers as drug delivery vehicles. These sections are ordered into areas of increasing AFM complexity: imaging/particle sizing, surface roughness/quantitative analysis of images, and analysis of force curves (to extract nanoindentation and adhesion data).

EXPERT OPINION

AFM imaging/sizing is used extensively for the characterization of nanoparticle and nanofiber drug delivery vehicles, with surface roughness and nanomechanical/adhesion data acquisition being less common. The field is progressing into combining AFM with other techniques, notably SEM, ToF-SIMS, Raman, Confocal, and UV. Current limitations include a 50 nm resolution limit of nanoparticles imaged within live cells and AFM tip-induced activation of cytoskeleton proteins. Following drug release real-time with AFM-spectroscopic techniques and studying drug interactions on cell receptors appear to be on the horizon.

Surface modified halloysite nanotubes: A flexible interface for biological, environmental and catalytic applications

Halloysite Nanotubes (HNTs) are clay minerals that possess unique chemical composition and a tubular structure due to which, they have recently emerged as a potential nanomaterial for umpteen applications. Over the years, the myriad applications of HNT have been realized through the surface modification of HNT, which involves the modification of nanotube's inner lumen and the outer surface with different functional compounds. The presence of aluminum and silica groups on the inner and outer surface of HNT enhance the interfacial relationship of the nanotube with different functional agents. Compounds such as alkalis, organosilanes, polymers, compounds of biological origin, surfactants and nanomaterials have been used for the modification of the inner lumen and the outer surface of HNT. The strategies change the constitution of HNT's surface either through micro-disintegration of the surface or by introducing additional functional groups on the surface, which further enhances their potential to be used as a flexible interface for different applications. In this review, the different surface modification strategies of the outer surface and the inner lumen that have been employed over the years have been discussed. The biological, environmental and catalytic applications of these surface modified HNTs with such versatile interface in the past two years have been elaborately discussed as well.

The Use of Some Clay Minerals as Natural Resources for Drug Carrier Applications

The goal of modern research is to use environmentally preferable materials. In this context, clay minerals are emerging candidates for their bio- and ecocompatibility, low cost and natural availability. Clay minerals present different morphologies according to their layer arrangements. The use of clay minerals, especially in biomedical applications is known from ancient times and they are regaining attention in recent years. The most representative clay minerals are kaolinit, montmorillonite, sepiolites and halloysite. This review summarizes some clay minerals and their derivatives for application as nanocontainer for biologically active species.

Selective adsorption of oppositely charged PNIPAAM on halloysite surfaces: a route to thermo-responsive nanocarriers

Halloysite nanotubes were functionalized with stimuli-responsive macromolecules to generate smart nanohybrids. Poly(N-isopropylacrylamide)-co-methacrylic acid (PNIPAAM-co-MA) was selectively adsorbed into halloysite lumen by exploiting electrostatic interactions. Amine-terminated PNIPAAM polymer was also investigated that selectively interacts with the outer surface of the nanotubes. The adsorption site has a profound effect on the thermodynamic behavior and therefore temperature responsive features of the hybrid material. The drug release kinetics was investigated by using diclofenac as a non-steroidal anti-inflammatory drug model. The release kinetics depends on the nanoarchitecture of the PNIPAAM/halloysite based material. In particular, diclofenac release was slowed down above the LCST for PNIPAAM-co-MA/halloysite. Opposite trends occurred for halloysite functionalized with PNIPAAM at the outer surface. This work represents a further step toward the opportunity to extend and control the delivery conditions of active species, which represent a key point in technological applications.

Near-infrared light triggered drug release from mesoporous silica nanoparticles

Stimuli triggered drug delivery systems enable controlled release of drugs at the optimal space and time, thus achieving optimal therapeutic effects. As one of the most important stimuli used in bioapplications, near-infrared (NIR) light possesses unique advantages such as deep tissue penetration with minimum auto-fluorescence & tissue scattering and high biosafety. Mesoporous silica nanoparticles (MSNs) are one of the most studied nanocarriers; apart from having a high surface area and large pore volume for loading of drugs, they can be easily functionalized with inorganic nanomaterials and stimuli responsive polymers or organic switch molecules, creating possibilities for designing complex stimuli triggered drug delivery systems. Considering the high tissue penetration depth of NIR light and the unique mesoporous structure of MSNs, NIR responsive inorganic nanoparticle functionalized MSNs can be further combined with stimuli responsive materials to form smart "nano-devices" for controlled drug delivery toward tumors, and to date much progress has been made. In this article, recent advances in the design of NIR triggered mesoporous silica drug delivery systems are systematically summarized and some outstanding studies are highlighted. We will also discuss the shortcomings, challenges and opportunities in the field.

In vitro and in vivo toxicity evaluation of halloysite nanotubes

Because of their outstanding properties, increasing numbers of research studies and emerging applications for manufacturing products are currently in progress for halloysite nanotubes (HNTs). Therefore, the impact of HNTs on the environment and human health should be taken into consideration. In order to clearly show the cell uptake of HNTs and the biodistribution of HNTs in zebrafish, HNTs are labeled with fluorescein isothiocyanate (FITC-HNTs). The cytotoxicity assays showed that the cell viabilities of human umbilical vein endothelial cells (HUVECs) and human breast adenocarcinoma (MCF-7) cells were above 60% after being treated with different concentrations of HNTs (2.5-200 μg mL^-1) for 72 h. Confocal laser scanning microscopy (CLSM) results showed the uptake of HNTs by HUVECs and MCF-7 cells. The in vivo toxicity of HNTs was then investigated in the early development of zebrafish embryos. The percent survival of zebrafish embryos and larvae showed no significant changes at different developmental stages (24, 48, 72, 96, and 120 hpf) when treated with various concentrations of HNTs (0.25-10 mg mL^-1). Besides, HNTs could promote the hatchability of zebrafish embryos and did not affect the morphological development of zebrafish at a concentration of ≤25 mg mL^-1. HNTs could also be ingested by zebrafish larvae and accumulated predominantly in the gastrointestinal tract. The fluorescence intensity of FITC-HNTs decreased gradually with time, which suggested that HNTs could be excreted by zebrafish larvae through the gastrointestinal metabolism. Therefore, it can be concluded that HNTs are relatively biocompatible nanomaterials, which can be utilized in many fields.

Functionalization of Halloysite Nanotubes via Grafting of Dendrimer for Efficient Intracellular Delivery of siRNA

Here, polyamidoamine grafted halloysite nanotubes (PAMAM- g-HNTs) were synthesized for loading of siRNA in order to intracellular delivery of siRNA and treat of breast cancer via gene therapy. The successful grafting of PAMAM on HNTs was confirmed by various analytical methods. The size, zeta potential, and grafting ratio of PAMAM- g-HNTs is ∼206.2 nm, +19.8 mV, and 3.04%, respectively. PAMAM- g-HNTs showed good cytocompatibility toward HUVECs (84.7%) and MCF-7 cells (82.3%) even at high concentration of 100 μg/mL. PAMAM- g-HNTs/siRNA exhibited enhanced cellular uptake efficiency of 94.3% compared with Lipofectamine 2000 (Lipo2000)/siRNA (83.6%). PAMAM- g-HNTs/small interfering RNA-vascular endothelial growth factor (siVEGF) led to 78.0% knockdown of cellular VEGF mRNA and induced 33.6% apoptosis in the MCF-7 cells, which is also much higher than that of Lipo2000/siVEGF. In vivo anti-cancer results demonstrated that PAMAM- g-HNTs/siVEGF treated 4T1-bearing mice showed enhanced anti-cancer efficacy than Lipo2000/siVEGF group. Also, the nanocarrier system showed negligible toxic effects toward the major organs of mice. In vivo fluorescence imaging studies showed that there is a slight decrease in the fluorescence signal of PAMAM- g-HNTs/cy5-siVEGF after 72 h post-injection. Therefore, PAMAM- g-HNTs show promising application as novel nanovectors for siRNA delivery and gene therapy of cancer.

Modified halloysite nanoclay as a vehicle for sustained drug delivery

This paper presents the effect of modified halloysite nanotubes on the sustained drug release mechanisms of sodium salicylate. Acid treatment and composite polymer-halloysite modification techniques were adopted in this study. After each modification, sodium salicylate drug was loaded, and in vitro release properties were evaluated and compared with the raw unmodified halloysite nanotubes. The results obtained from SEM, TEM and FTIR analyses indicate that both acid treatment and composite formation have no effect on the tubular structure and morphology of halloysite. However, modification of the halloysite nanotubes did influence the drug release rate. In the acid treatment modification, there was an improved loading of sodium salicylate drug which resulted in the sustain release of large amount of the sodium salicylate. In the polymer/halloysite composite formation, a consistent layer of polymer was formed around the halloysite during the composite formation and thus delayed release providing sustained release of sodium salicylate drug over a longer period of time as compared to the acid treated and unmodified halloysite. The results from the invitro release were best fitted with the Higuchi and the Koresymer-Peppas models.

Halloysite clay nanotubes for life sciences applications: From drug encapsulation to bioscaffold

Natural forming clay halloysite is an emerging nanomaterial carrier for sustained drug delivery. These 50 nm diameter aluminosilicate tubes, with inner - alumina and outer - silica surface layers, can be loaded with 10-30 wt% of drug molecules, DNA and enzymes. The opposite charge of the inner and outer halloysite surface allow for selective drug adsorption inside or outside the clay nanotubes. The drug loaded halloysite enhanced the zeta potential of minus 50-60 mV allowing for stable aqueous nanocolloids. Halloysite nanoformulations provide an extended 10-20 h release profile, and may be functionalized (e.g., clogging tubes' end with polymers extending release time to 1-2 weeks or allowing for triggered release), which renders these clay nanostructures as promising controlled delivery systems. Recent studies demonstrate the potential of abundantly available halloysite clay nanotubes for life science applications, from drug delivery via oral or topical administration, to tissue scaffolds and regenerative medicine, while assessing their cellular internalization, stability, biosafety and biocompatibility are featured. The benefits and limitations of halloysite clay nanotubes are discussed, as well as the directions for future developments.

Fluorescence and Cytotoxicity of Cadmium Sulfide Quantum Dots Stabilized on Clay Nanotubes

Quantum dots (QD) are widely used for cellular labeling due to enhanced brightness, resistance to photobleaching, and multicolor light emissions. CdS and CdxZn₁-xS nanoparticles with sizes of 6⁻8 nm were synthesized via a ligand assisted technique inside and outside of 50 nm diameter halloysite clay nanotubes (QD were immobilized on the tube's surface). The halloysite⁻QD composites were tested by labeling human skin fibroblasts and prostate cancer cells. In human cell cultures, halloysite⁻QD systems were internalized by living cells, and demonstrated intense and stable fluorescence combined with pronounced nanotube light scattering. The best signal stability was observed for QD that were synthesized externally on the amino-grafted halloysite. The best cell viability was observed for CdxZn₁-xS QD immobilized onto the azine-grafted halloysite. The possibility to use QD clay nanotube core-shell nanoarchitectures for the intracellular labeling was demonstrated. A pronounced scattering and fluorescence by halloysite⁻QD systems allows for their promising usage as markers for biomedical applications.

Chemical modification of halloysite nanotubes for controlled loading and release

Clay minerals have been used for medical purposes from ancient times. Among them, the halloysite nanotube, an aluminosilicate of the kaolin group, is an emerging nanomaterial which possesses peculiar chemical characteristics. By means of suitable modifications, such as supramolecular functionalization or covalent modifications, it is possible to obtain novel nanomaterials with tunable properties for several applications. In this context the covalent grafting of suitable organic moieties on the external surface or in the halloysite lumen has been exploited to improve the loading and release of several biologically active molecules. The resulting hybrid nanomaterials have been applied as drug carrier and delivery systems, as fillers for hydrogels, in tissue regeneration and in the gene delivery field. Furthermore the loading and release of specific molecules have been also investigated for environmental purposes. This review summarizes the main developments in the halloysite modifications in the last 20 years with a particular attention to the development in the past two years.

Citrate- and Succinate-Modified Carbonate Apatite Nanoparticles with Loaded Doxorubicin Exhibit Potent Anticancer Activity against Breast Cancer Cells

Biodegradable inorganic apatite-based particle complex is popular for its pH-sensitivity at the endosomal acidic environment to facilitate drug release following cellular uptake. Despite being a powerful anticancer drug, doxorubicin shows severe off-target effects and therefore would need a carrier for the highest effectiveness. We aimed to chemically modify carbonate apatite (CA) with Krebs cycle intermediates, such as citrate and succinate in order to control the growth of the resultant particles to more efficiently carry and transport the anticancer drug into the cancer cells. Citrate- or succinate-modified CA particles were synthesized with different concentrations of sodium citrate or sodium succinate, respectively, in the absence or presence of doxorubicin. The drug loading efficiency of the particles and their cellular uptake were observed by quantifying fluorescence intensity. The average diameter and surface charge of the particles were determined using Zetasizer. Cell viability was assessed by MTT assay. Citrate-modified carbonate apatite (CMCA) exhibited the highest (31.38%) binding affinity for doxorubicin and promoted rapid cellular uptake of the drug, leading to the half-maximal inhibitory concentration 1000 times less than that of the free drug in MCF-7 cells. Hence, CMCA nanoparticles with greater surface area enhance cytotoxicity in different breast cancer cells by enabling higher loading and more efficient cellular uptake of the drug.

Nanohydrogel Formation within the Halloysite Lumen for Triggered and Sustained Release

An easy strategy to obtain nanohydrogels within the halloysite nanotube (HNTs) lumen was investigated. Inorganic reverse micelles based on HNTs and hexadecyltrimethylammonium bromides were dispersed in chloroform, and the hydrophilic cavity was used as a nanoreactor to confine the gel formation based on alginate cross-linked by calcium ions. Spectroscopy and electron microscopy experiments proved the confinement of the polymer into the HNT lumen and the formation of calcium-mediated networks. Biological tests proved the biocompatibility of the hybrid hydrogel. The nanogel in HNTs was suitable for drug loading and sustained release with the opportunity of triggered burst release by chemical stimuli. Here, we propose a new strategy based on inorganic reverse micelles for nanohydrogel formation, which are suitable for industrial and biological applications as well as for selective and triggered adsorption and/or release.

Mesoporous inorganic nanoscale particles for drug adsorption and controlled release

The review provides an overview of the mesoporous inorganic particles employed as drug delivery systems for controlled and sustained release of drugs. We have classified promising nanomaterials for drug delivery on the basis of their natural or synthetic origin. Nanoclays are available in different morphologies (nanotubes, nanoplates and nanofibers) and they are typically available at low cost from natural resources. The surface chemistry of nanoclays is versatile for targeted modifications to control loading and release properties. Synthetic nanomaterials (imogolite, laponite and mesoporous silica) present the advantages of well-established purity and availability with size features that are finely controlled. Both nanoclays and inorganic synthetic nanoparticles can be functionalized forming organic/inorganic architectures with stimuli-responsive features.

Halloysite Nanotubes for Cleaning, Consolidation and Protection

Herein, we report our recent research concerning the development of halloysite based protocols for cleaning, consolidation and protection purposes. Surface modification of halloysite cavity by anionic surfactants was explored to fabricate inorganic micelles able to solubilize hydrophobic contaminants. Hybrid dispersions based on halloysite and ecocompatible polymers were tested as consolidants for paper and waterlogged archaeological woods. Encapsulation of deacidifying and flame retardant agents within the halloysite lumen was conducted with aim to obtain nanofiller with a long-term protection ability. The results prove the suitability and versatility of halloysite nanotubes, which are perspective inorganic nanoparticles within materials science, remedation and conservation of cultural heritage fields.

Rapid and Controlled In Situ Growth of Noble Metal Nanostructures within Halloysite Clay Nanotubes

A rapid (≤2 min) and high-yield low-temperature synthesis has been developed for the in situ growth of gold nanoparticles (NPs) with controlled sizes in the interior of halloysite nanotubes (HNTs). A combination of HAuCl₄ in ethanol/toluene, oleic acid, and oleylamine surfactants and ascorbic acid reducing agent with mild heating (55 °C) readily lead to the growth of targeted nanostructures. The sizes of Au NPs are tuned mainly by adjusting nucleation and growth rates. Further modification of the process, through an increase in ascorbic acid, allows for the formation of nanorods (NRs)/nanowires within the HNTs. This approach is not limited to gold-a modified version of this synthetic strategy can also be applied to the formation of Ag NPs and NRs within the clay nanotubes. The ability to readily grow such core-shell nanosystems is important to their further development as nanoreactors and active catalysts. NPs within the tube interior can further be manipulated by the electron beam. Growth of Au and Ag could be achieved under a converged electron beam suggesting that both Au@HNT and Ag@HNT systems can be used for the fundamental studies of NP growth/attachment.

Smart H2O2-Responsive Drug Delivery System Made by Halloysite Nanotubes and Carbohydrate Polymers

A novel chemical hydrogel was facilely achieved by coupling 1,4-phenylenebisdiboronic acid modified halloysite nanotubes (HNTs-BO) with compressible starch. The modified halloysite nanotubes (HNTs) and prepared hydrogel were characterized by solid-state nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and transmission electron microscope (TEM). The linkage of B-C in the hydrogel can be degraded into B-OH and C-OH units in the presence of H₂O₂ and result in the degradation of the chemical hydrogel. Pentoxifylline was loaded into the lumen of the HNTs-BO, and then gave the pentoxifylline-loaded hydrogel. The drug release profile shows that it was no more than 7% dissolved when using phosphate buffer solution (PBS) as the release medium. Notably, a complete release (near 90%) can be achieved with the addition of H₂O₂ ([H₂O₂] = 1 × 10^-4 M), suggesting a high H₂O₂ responsiveness of the as-formed hydrogel. The drug release results also show that the "initial burst release" can be effectively suppressed by loading pentoxifylline inside the lumen of the HNTs rather than embedding the drug in the hydrogel network. The drug-loaded hydrogel with H₂O₂-responsive release behavior may open up a broader application in the field of biomedicine.

Binase Immobilized on Halloysite Nanotubes Exerts Enhanced Cytotoxicity toward Human Colon Adenocarcinoma Cells

Many ribonucleases (RNases) are considered as promising tools for antitumor therapy because of their selective cytotoxicity toward cancer cells. Binase, the RNase from Bacillus pumilus, triggers apoptotic response in cancer cells expressing RAS oncogene which is mutated in a large percentage of prevalent and deadly malignancies including colorectal cancer. The specific antitumor effect of binase toward RAS-transformed cells is due to its direct binding of RAS protein and inhibition of downstream signaling. However, the delivery of proteins to the intestine is complicated by their degradation in the digestive tract and subsequent loss of therapeutic activity. Therefore, the search of new systems for effective delivery of therapeutic proteins is an actual task. This study is aimed to the investigation of antitumor effect of binase immobilized on natural halloysite nanotubes (HNTs). Here, we have developed the method of binase immobilization on HNTs and optimized the conditions for the enzyme loading and release (i); we have found the non-toxic concentration of pure HNTs which allows to distinguish HNTs- and binase-induced cytotoxic effects (ii); using dark-field and fluorescent microscopy we have proved the absorption of binase-loaded HNTs on the cell surface (iii) and demonstrated that binase-halloysite nanoformulations possessed twice enhanced cytotoxicity toward tumor colon cells as compared to the cytotoxicity of binase itself (iv). The enhanced antitumor activity of biocompatible binase-HNTs complex confirms the advisability of its future development for clinical practice.

Halloysite Nanotubes: Controlled Access and Release by Smart Gates

Hollow halloysite nanotubes have been used as nanocontainers for loading and for the triggered release of calcium hydroxide for paper preservation. A strategy for placing end-stoppers into the tubular nanocontainer is proposed and the sustained release from the cavity is reported. The incorporation of Ca(OH)₂ into the nanotube lumen, as demonstrated using transmission electron microscopy (TEM) imaging and Energy Dispersive X-ray (EDX) mapping, retards the carbonatation, delaying the reaction with CO₂ gas. This effect can be further controlled by placing the end-stoppers. The obtained material is tested for paper deacidification. We prove that adding halloysite filled with Ca(OH)₂ to paper can reduce the impact of acid exposure on both the mechanical performance and pH alteration. The end-stoppers have a double effect: they preserve the calcium hydroxide from carbonation, and they prevent from the formation of highly basic pH and trigger the response to acid exposure minimizing the pH drop-down. These features are promising for a composite nanoadditive in the smart protection of cellulose-based materials.

Halloysite and chitosan oligosaccharide nanocomposite for wound healing

Halloysite is a natural nanotubular clay mineral (HNTs, Halloysite Nano Tubes) chemically identical to kaolinite and, due to its good biocompatibility, is an attractive nanomaterial for a vast range of biological applications. Chitosan oligosaccharides are homo- or heterooligomers of N-acetylglucosamine and D-glucosamine, that accelerate wound healing by enhancing the functions of inflammatory and repairing cells. The aim of the work was the development of a nanocomposite based on HNTs and chitosan oligosaccharides, to be used as pour powder to enhance healing in the treatment of chronic wounds. A 1:0.05 wt ratio HTNs/chitosan oligosaccharide nanocomposite was obtained by simply stirring the HTNs powder in a 1% w/w aqueous chitosan oligosaccharide solution and was formed by spontaneous ionic interaction resulting in 98.6% w/w HTNs and 1.4% w/w chitosan oligosaccharide composition. Advanced electron microscopy techniques were considered to confirm the structure of the hybrid nanotubes. Both HTNs and HTNs/chitosan oligosaccharide nanocomposite showed good in vitro biocompatibility with normal human dermal fibroblasts up to 300μg/ml concentration and enhanced in vitro fibroblast motility, promoting both proliferation and migration. The HTNs/chitosan oligosaccharide nanocomposite and the two components separately were tested for healing capacity in a murine (rat) model. HTNs/chitosan oligosaccharide allowed better skin reepithelization and reorganization than HNTs or chitosan oligosaccharide separately. The results suggest to develop the nanocomposite as a medical device for wound healing.

STATEMENT OF SIGNIFICANCE

The present work is focused on the development of halloysite and chitosan oligosaccharide nanocomposite for wound healing. It considers a therapeutic option for difficult to heal skin lesions and burns. The significance of the research considers two fundamental aspects: the first one is related to the development of a self-assembled nanocomposite, formed by spontaneous ionic interaction, while the second one is related to the possibility to find an effective treatment for cutaneous non healing lesions. The characterization of this hybrid system involves a multidisciplinary approach considering integrated techniques of solid state investigation and advanced electron microscopies, and in vitro/in vivo models to understand biocompatibility and proliferation properties (enhancement of in vitro fibroblast motility, proliferation and migration, and of in vivo burn healing), to understand safety and effectiveness of the developed nanocomposite.

Clay-based drug-delivery systems: what does the future hold?

Clays for drug delivery have been used from ancient time due to the large availability of clay minerals and their unprecedented properties. The empirical use of nanoclays from the past is converted in a stimulating scientific task aimed at building up nanoarchitectonic vehicles for drug delivery in a targeted and stimuli-responsive fashion. Here the historical aspects are discussed; next the modern examples of applications of different clay-based materials are discussed. A special focus is given to halloysite clay nanotubes, which are an emerging and very promising nanomaterial for drug-delivery purposes due to its special morphology and unique chemical properties. Advantages and limitations of these natural nanomaterials are critically discussed pointing out the future perspectives and directions for further research.

Paclitaxel Encapsulated in Halloysite Clay Nanotubes for Intestinal and Intracellular Delivery

Naturally formed halloysite tubules have a length of 1 μm and lumens with a diameter of 12-15 nm which can be loaded with drugs. Halloysite's biocompatibility allows for its safe delivering to cells at a concentration of up to 0.5 mg/mL. We encapsulated the anticancer drug paclitaxel in halloysite and evaluated the drug release kinetics in simulated gastric and intestinal conditions. To facilitate maximum drug release in intestinal tract, halloysite tubes were coated with the pH-responsive polymer poly(methacrylic acid-co-methyl methacrylate). Release kinetics indicated a triggered drug release pattern at higher pH, corresponding to digestive tract environment. Tablets containing halloysite, loaded with paclitaxel, as a compression excipient were formulated with drug release occurring at a sustained rate. In vitro anticancer effects of paclitaxel-loaded halloysite nanotubes were evaluated on human cancer cells. In all the treated cell samples, polyploid nuclei of different sizes and fragmented chromatin were observed, indicating a high therapeutic effect of halloysite formulated paclitaxel.

Biopolymer-Targeted Adsorption onto Halloysite Nanotubes in Aqueous Media

Studies on the adsorption of biopolymers onto halloysite nanotubes (HNTs) in water were conducted. Three polymers with different charges-anionic (pectin), neutral (hydroxypropyl cellulose), and cationic (chitosan)-were chosen. The thermodynamic parameters for the adsorption of polymers onto the HNT surface were determined by isothermal titration calorimetry (ITC). The experimental data were interpreted based on a Langmuir adsorption model. The standard variations in free energy, enthalpy, and entropy of the process were obtained and discussed. Turbidimetry was used to evaluate the stability of functionalized nanoparticles in water. The ζ-potential clarified the surface charge properties of functionalized nanotubes upon polymer adsorption. The interaction of modified nanotubes with polymers led to the formation of a colloidal system with tunable stability and surface properties, which offers different perspectives on new applications of these dispersions, such as carriers for substances to be released in response to external stimuli.

Strategies for using nanoprobes to perceive and treat cancer activity: a review

Nanomedicine has seen a significant increase in research on stimuli-responsive activatable nanoprobes for tumor-specific delivery and diagnosis. The tumor microenvironment has particular characteristics that can be exploited to implement therapeutic strategies based on disparities between normal tissues and tumor tissues, including differences in pH, oxygenation, enzymatic expression, gene activation/inactivation, and vasculature. The nanocarriers of activatable nanoparticles maintain their structure while circulating in the body and, upon reaching the tumor site, are altered by unique tumoral stimuli, leading to the release of a drug or other agent. This review demonstrates the latest achievements in the use of internal stimuli-responsive, activatable nanoparticles with respect to unique design strategies and applications.

Microfluidic assembly of a nano-in-micro dual drug delivery platform composed of halloysite nanotubes and a pH-responsive polymer for colon cancer therapy

Harsh conditions of the gastrointestinal tract hinder the oral delivery of many drugs. Developing oral drug delivery systems based on commercially available materials is becoming more challenging due to the demand for simultaneously delivering physicochemically different drugs for treating complex diseases. A novel architecture, namely nanotube-in-microsphere, was developed as a drug delivery platform by encapsulating halloysite nanotubes (HNTs) in a pH-responsive hydroxypropyl methylcellulose acetate succinate polymer using microfluidics. HNTs were selected as orally acceptable clay mineral and their lumen was enlarged by selective acid etching. Model drugs (atorvastatin and celecoxib) with different physicochemical properties and synergistic effect on colon cancer prevention and inhibition were simultaneously incorporated into the microspheres at a precise ratio, with atorvastatin and celecoxib being loaded in the HNTs and polymer matrix, respectively. The microspheres showed spherical shape, narrow particle size distribution and pH-responsive dissolution behavior. This nanotube/pH-responsive polymer composite protected the loaded drugs from premature release at pH⩽6.5, but allowed their fast release and enhanced the drug permeability, and the inhibition of colon cancer cell proliferation at pH 7.4. Overall, the nano-in-micro drug delivery composite fabricated by microfluidics is a promising and flexible platform for the delivery of multiple drugs for combination therapy.

STATEMENT OF SIGNIFICANCE

Halloysite nanotubes (HNTs) are attracting increasing attention for drug delivery applications. However, conventional HNTs-based oral drug delivery systems are lack of the capability to precisely control the drug release at a desired site in the gastrointestinal tract. In this study, a nanotube-in-microsphere drug delivery platform is developed by encapsulating HNTs in a pH-responsive polymer using microfluidics. Drugs with different physicochemical properties and synergistic effect on colon cancer therapy were simultaneously incorporated in the microspheres. The prepared microspheres prevented the premature release of the loaded drugs after exposure to the harsh conditions of the gastrointestinal tract, but allowed their simultaneously fast release, and enhanced the drug permeability and the inhibition of colon cancer cell proliferation in response to the colon pH.

Covalently modified halloysite clay nanotubes: synthesis, properties, biological and medical applications

Halloysite (HNT) is a promising natural nanosized tubular clay mineral that has many important uses in different industrial fields.

Development of arginine based nanocarriers for targeting and treatment of intracellularSalmonella

Arginine decorated nanocarriers exhibited intravacuolar targeting capability which was utilized to deliver antibiotics and reactive NO into the intracellular niche of pathogens likeSalmonellaandMycobacterium.

Enzyme-immobilized clay nanotube–chitosan membranes with sustainable biocatalytic activities

We have developed a simple and effective strategy to prepare an enzymatic membrane by the admixing of a halloysite clay nanotube–lipase complex and a chitosan solution.

Long-term antibacterial protected cotton fabric coating by controlled release of chlorhexidine gluconate from halloysite nanotubes

An antibacterial HNTs/CG composite with controlled release was prepared, and used to coat cotton to obtain an antibacterial and biocompatible cotton fabric.

Characterizations of the Formation of Polydopamine-Coated Halloysite Nanotubes in Various pH Environments

Recent studies demonstrated that polydopamine (PDA) coating is universal to nearly all substrates, and it endows substrates with biocompatibility, postfunctionality, and other useful properties. Surface chemistry of PDA coating is important for its postmodifications and applications. However, there is less understanding of the formation mechanism and surface functional groups of PDA layers generated in different conditions. Halloysite is a kind of clay mineral with tubular nanostructure. Water-swellable halloysite has unique reactivity. In this study, we have investigated the reaction of dopamine in the presence of water-swellable halloysite. We have tracked the reaction progresses in different pH environments by using UV-vis spectroscopy and surface-enhanced Raman spectroscopy (SERS). The surface properties of PDA on halloysite were clarified by X-ray photoelectron spectroscopy (XPS), SERS, Fourier transform infrared (FTIR) characterizations, zeta potential, surface wettability, and morphological characterizations. We noticed that the interaction between halloysite surface and dopamine strongly influences the surface functionality of coated PDA. In addition, pH condition further modulates surface functional groups, resulting in less content of secondary/aromatic amine in PDA generated in weak acidic environment. This study demonstrates that the formation mechanism of polydopamine becomes complex in the presence of inorganic nanomaterials. Substrate property and reaction condition dominate the functionality of obtained PDA together.

Ecotoxicity of halloysite nanotube-supported palladium nanoparticles in Raphanus sativus L

Halloysite nanotubes (HNTs) are natural nanomaterials that are biocompatible and available in large amounts at low prices. They are emerging nanomaterials with appealing properties for applications like support for metal nanoparticles (NPs). The potential environmental impacts of NPs can be understood in terms of phytotoxicity. Current research has been focusing on HNT applications in cell or animal models, while their use in plants is limited so their ecotoxicological impact is poorly documented. To date there are no studies on the phytotoxic effects of functionalized halloysites (functionalized-HNTs). To develop a quantitative risk assessment model for predicting the potential impact of HNT-supported palladium nanoparticles (HNT-PdNPs) on plant life, an investigation was undertaken to explore their effects on seed germination, seedling development, and mitotic division in root tip cells of 2 lots of Raphanus sativus L. with different vigor. The results showed that exposure to 1500 mg/L of HNTs, functionalized-HNTs, and HNT-PdNPs had no significant influence on germination, seedling development, xylem differentiation, or mitotic index in both lots. Cytogenetic analyses revealed that treatments with functionalized-HNT significantly increased the number of aberrations in low-vigor seeds. These results suggest that low-vigor seeds represent a model for a stress test that would be useful to monitor the effects of NPs. Moreover the present study offers scientific evidence for the use of halloysite for environmental purposes, supporting the biological safety of HNT-PdNPs. Environ Toxicol Chem 2016;35:2503-2510. © 2016 SETAC.

Surface-Enhanced Raman Scattering to Evaluate Nanomaterial Cytotoxicity on Living Cells

The increasing number of reports about false positive or negative results from conventional cytotoxicity assays of nanomaterials (NMs) suggests that more reliable NM toxicity assessment methods should be developed. Here, we report a novel approach for nanotoxicity evaluation based on surface-enhanced Raman spectroscopy (SERS). Three model NMs were tested on two model cell lines and the results were validated by WST-1 cytotoxicity assay and annexin V-FITC/propidium iodide (PI) staining as apoptosis-necrosis assay. The localization of nanoparticles (NPs) in the cells and the cellular conditions upon NP incubation were visualized by transmission electron microscopy (TEM) and enhanced dark-field (EDF) microscopy. SERS revealed a broader view on the consequences of cell-NM interactions compared to the conventional cytotoxicity assays where only one aspect of toxicity can be measured by one assay type. The results suggest that SERS can significantly contribute to the cytotoxicity evaluation bypassing NM or assay component-related complications with less effort.

Intracellular redox induced drug release in cancerous and mesenchymal stem cells

In this report, we investigated intracellular redox induced drug release in cancerous cells and human mesenchymal stem cells (MSCs) as an example of healthy cells using redox-responsive microcapsules with covalently bonded anti-cancer drug (doxorubicin) via the amine-reactive cross-linker, 3,3'-dithiobis(sulfosuccinimidyl propionate) containing disulfide bond. Such rationally designed capsules with incorporated redox-sensitive cross-linker are capable of controllable Dox release in the presence of glutathione (GSH) due to a thiol-cleavable disulfide bonds. The treatment of human MSCs and human cervical cancer cell line (HeLa) with Dox-conjugated capsules showed that the Dox release was observed only when capsules incubated with HeLa cells which can be induced by high GSH level in cancerous (HeLa) cells. Moreover, the results of cell viability indicated that Dox-conjugated capsules are more effective when inducing cell death of HeLa than free Dox improving the anti-tumor efficacy of chemotherapeutic drug and simultaneously they possess lower cytotoxicity against MSCs compared to cancerous cells. Such properties are important in design of smart drug carriers for efficient cancer therapy.

An Enzyme-Responsive Nanogel Carrier Based on PAMAM Dendrimers for Drug Delivery

G4 PAMAM dendrimer molecules were modified via covalently conjugating RGDC, RAADyC, and PEG chains on the periphery (Mac-1), by which a nanogel drug carrier with enzyme-sensitivity (NG-1) was constructed through an oxidation reaction by using NaIO4 to initiate the chemical cross-link of the functional groups on the periphery of dendrimers. Mac-1 and NG-1 both had a spherelike shape with a relatively uniform size of 20 nm for Mac-1 and 50 nm for NG-1 as evidenced by TEM, SEM, and DLS measurements. NG-1 showed much higher drug loading capacity as compared with that of Mac-1 although the cavities in the dendritic structure were used to encapsulate drug molecules as reported in many literatures. In addition, the size of NG-1 with embedded doxorubicin hydrochloride (DOX) decreased significantly to 15 nm in the presence of elastase, which indicated the decomposition of the nanogel triggered by enzyme, leading to drug release in a sustained manner in vitro. The NG-1 carrier was noncytotoxic and biocompatible, and it achieved the same cytotoxicity as free DOX when the drug molecules were loaded inside. From confocal images, the penetrative process of DOX from nanogel could be clearly observed in 8 h. Such a dendrimer-based nanogel may be a potential nanocarrier for drug delivery in cancer therapy.

Automatic Echographic Detection of Halloysite Clay Nanotubes in a Low Concentration Range

Aim of this work was to investigate the automatic echographic detection of an experimental drug delivery agent, halloysite clay nanotubes (HNTs), by employing an innovative method based on advanced spectral analysis of the corresponding "raw" radiofrequency backscatter signals. Different HNT concentrations in a low range (5.5-66 × 1010 part/mL, equivalent to 0.25-3.00 mg/mL) were dispersed in custom-designed tissue-mimicking phantoms and imaged through a clinically-available echographic device at a conventional ultrasound diagnostic frequency (10 MHz). The most effective response (sensitivity = 60%, specificity = 95%), was found at a concentration of 33 × 1010 part/mL (1.5 mg/mL), representing a kind of best compromise between the need of enough particles to introduce detectable spectral modifications in the backscattered signal and the necessity to avoid the losses of spectral peculiarity associated to higher HNT concentrations. Based on theoretical considerations and quantitative comparisons with literature-available results, this concentration could also represent an optimal concentration level for the automatic echographic detection of different solid nanoparticles when employing a similar ultrasound frequency. Future dedicated studies will assess the actual clinical usefulness of the proposed approach and the potential of HNTs for effective theranostic applications.

Clay nanotube-biopolymer composite scaffolds for tissue engineering

Porous biopolymer hydrogels doped at 3-6 wt% with 50 nm diameter/0.8 μm long natural clay nanotubes were produced without any cross-linkers using the freeze-drying method. The enhancement of mechanical strength (doubled pick load), higher water uptake and thermal properties in chitosan-gelatine-agarose hydrogels doped with halloysite was demonstrated. SEM and AFM imaging has shown the even distribution of nanotubes within the scaffolds. We used enhanced dark-field microscopy to visualise the distribution of halloysite nanotubes in the implantation area. In vitro cell adhesion and proliferation on the nanocomposites occur without changes in viability and cytoskeleton formation. In vivo biocompatibility and biodegradability evaluation in rats has confirmed that the scaffolds promote the formation of novel blood vessels around the implantation sites. The scaffolds show excellent resorption within six weeks after implantation in rats. Neo-vascularization observed in newly formed connective tissue placed near the scaffold allows for the complete restoration of blood flow. These phenomena indicate that the halloysite-doped scaffolds are biocompatible as demonstrated both in vitro and in vivo. The chitosan-gelatine-agarose doped clay nanotube nanocomposite scaffolds fabricated in this work are promising candidates for tissue engineering applications.

Halloysite Clay Nanotubes for Loading and Sustained Release of Functional Compounds

Halloysite is an alumosilicate tubular clay with a diameter of 50 nm, an inner lumen of 15 nm and a length of 600-900 nm. It is a natural biocompatible nanomaterial available in thousands of tons at low price, which makes it a good candidate for nanoarchitectural composites. The inner lumen of halloysite may be adjusted by etching to 20-30% of the tube volume and loading with functional agents (antioxidants, anticorrosion agents, flame-retardant agents, drugs, or proteins) allowing for formulations with sustained release tuned by the tube end-stoppers for hours and days. Clogging the tube ends in polymeric composites allows further extension of the release time. Thus, antioxidant-loaded halloysite doped into rubber enhances anti-aging properties for at least 12 months. The addition of 3-5 wt% of halloysite increases the strength of polymeric materials, and the possibility of the tube's orientation promises a gradient of properties. Halloysite nanotubes are a promising mesoporous media for catalytic nanoparticles that may be seeded on the tube surface or synthesized exclusively in the lumens, providing enhanced catalytic properties, especially at high temperatures. In vitro and in vivo studies on biological cells and worms indicate the safety of halloysite, and tests for efficient adsorption of mycotoxins in animals' stomachs are also carried out.

Triple-responsive inorganic–organic hybrid microcapsules as a biocompatible smart platform for the delivery of small molecules

We designed novel hybrid inorganic/organic capsules with unique physicochemical features enabling multimodal triggering.

Dual drug-loaded halloysite hybrid-based glycocluster for sustained release of hydrophobic molecules

A dual drug-loaded HNT–CD glycocluster delivery system based on halloysite nanotubes and carbohydrate functionalized cyclodextrin for delivery of natural drugs was developed.

Functionalized halloysite nanotube by chitosan grafting for drug delivery of curcumin to achieve enhanced anticancer efficacy

A new HNTs-based drug delivery system to improve the bioavailability of curcumin for cancer therapy is proposed.