Pt-Au alloying at the nanoscale

The formation of nanosized alloys between a pair of elements, which are largely immiscible in bulk, is examined in the archetypical case of Pt and Au. Element specific resonant high-energy X-ray diffraction experiments coupled to atomic pair distribution functions analysis and computer simulations prove the formation of Pt-Au alloys in particles less than 10 nm in size. In the alloys, Au-Au and Pt-Pt bond lengths differing in 0.1 Å are present leading to extra structural distortions as compared to pure Pt and Au particles. The alloys are found to be stable over a wide range of Pt-Au compositions and temperatures contrary to what current theory predicts. The alloy-type structure of Pt-Au nanoparticles comes along with a high catalytic activity for electrooxidation of methanol making an excellent example of the synergistic effect of alloying at the nanoscale on functional properties.

Microwave decoration of Pt nanoparticles on entangled 3D carbon nanotube architectures as PEM fuel cell cathode

Proton-exchange membrane fuel cells (PEMFCs) are expected to provide a complementary power supply to fossil fuels in the near future. The current reliance of fuel cells on platinum catalysts is undesirable. However, even the best-performing non-noble metal catalysts are not as efficient. To drive commercial viability of fuel cells forward in the short term, increased utilization of Pt catalysts is paramount. We have demonstrated improved power and energy densities in a single PEMFC using a designed cathode with a Pt loading of 0.1 mg cm(-2) on a mesoporous conductive entangled carbon nanotube (CNT)-based architecture. This electrode allows for rapid transfer of both fuel and waste to and from the electrode, respectively. Pt particles are bound tightly, directly to CNT sidewalls by a microwave-reduction technique, which provided increased charge transport at this interface. The Pt entangled CNT cathode, in combination with an E-TEK 0.2 mg cm(-2) anode, has a maximum power and energy density of 940 mW cm(-2) and 2700 mA cm(-2), respectively, and a power and energy density of 4.01 W mg(Pt)(-1) and 6.35 A mg(Pt)(-1) at 0.65 V. These power densities correspond to a specific mass activity of 0.81 g Pt per kW for the combined mass of both anode and cathode electrodes, approaching the current US Department of Energy efficiency target.

Strategies for the fabrication of porous platinum electrodes

Porous platinum is of high technological importance due to its various applications in fuel cells, sensors, stimulation electrodes, mechanical actuators and catalysis in general. Based on a discussion of the general principles behind the reduction of platinum salts and corresponding deposition processes this article discusses techniques available for platinum electrode fabrication. The numerous, different strategies available to fabricate platinum electrodes are reviewed and discussed in the context of their tuning parameters, strengths and weaknesses. These strategies comprise bottom-up approaches as well as top-down approaches. In bottom-up approaches nanoparticles are synthesized in a fi rst step by chemical, photochemical or sonochemical means followed by an electrode formation step by e.g. thin fi lm technology or network formation to create a contiguous and conducting solid electrode structure. In top-down approaches fabrication starts with an already conductive electrode substrate. Corresponding strategies enable the fabrication of substrate-based electrodes by e.g. electrodeposition or the fabrication of self-supporting electrodes by dealloying. As a further top-down strategy, this review describes methods to decorate porous metals other than platinum with a surface layer of platinum. This way, fabrication methods not performable with platinum can be applied to the fabrication of platinum electrodes with the special benefit of low platinum consumption.

Pt-Covered Multiwall Carbon Nanotubes for Oxygen Reduction in Fuel Cell Applications

Recently one-dimensonal (1-D) Pt nanostructures have shown greatly enhanced intrinsic oxygen reduction reaction (ORR) activity (ORR kinetic current normalized to Pt surface area) and/or improved durability relative to conventional supported Pt catalysts. In this study, we report a simple synthetic route to create Pt-covered multiwall carbon nanotubes (Pt NPs/MWNTs) as promising 1-D Pt nanostructured catalysts for ORR in proton exchange membrane fuel cells (PEMFCs). The average ORR intrinsic activity of Pt NPs/MWNTs is ∼0.95 mA/cm(2) Pt at 0.9 ViR-corrected versus reversible hydrogen electrode (RHE), ∼3-fold higher than a commercial catalyst -46 wt % Pt/C (Tanaka Kikinzoku Kogyo) in 0.1 M HClO4 at room temperature. More significantly, the mass activity of Pt NPs/MWNTs measured (∼0.48 A/mgPt at 0.9 ViR-corrected vs RHE) is higher than other 1-D nanostructured catalysts and TKK catalysts. The enhanced intrinsic activity of 1-D Pt NPs/MWNTs could be attributed to the weak chemical adsorption energy of OHads-species on the surface Pt NPs covering MWNTs.

Synthesis and characterization of polyhedral Pt nanoparticles: their catalytic property, surface attachment, self-aggregation and assembly

In this paper, we presented the preparation procedure of Pt nanoparticles with the well-controlled polyhedral morphology and size by a modified polyol method using AgNO(3) in accordance with the reduction of H(2)PtCl(6) in EG at high temperature around 160°C. The methods of UV-vis spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and high resolution (HR) TEM measurements were used to characterize their surface morphology, size, and crystal structure. We have observed that the polyhedral Pt nanoparticles of sharp edges and corners were produced in the preferential homogenous growth as well as the formation of porous and large Pt particles by self-aggregation and assembly originating from as-prepared polyhedral Pt nanoparticles. It is most impressive to find that the arrangement of Pt nanoparticles was observed in their surface attachments, self-aggregation, random and directed surface self-assembly by the bottom-up approach. Their high electrocatalytic activity for methanol oxidation was predicted. The findings and results showed that the polyhedral Pt nanoparticle-based catalysts exhibited the high electrocatalytic activity for their potential applications in developing the efficient Pt-based catalysts for direct methanol fuel cells.

Size-dependent enhancement of electrocatalytic performance in relatively defect-free, processed ultrathin platinum nanowires

We report on the synthesis, characterization, and electrocatalytic performance of ultrathin Pt nanowires with a diameter of less than 2 nm. An acid-wash protocol was employed in order to yield highly exfoliated, crystalline nanowires with a diameter of 1.3 +/- 0.4 nm. The electrocatalytic activity of these nanowires toward the oxygen reduction reaction was studied in relation to the activity of both supported and unsupported Pt nanoparticles as well as with previously synthesized Pt nanotubes. Our ultrathin, acid-treated, unsupported nanowires displayed an electrochemical surface area activity of 1.45 mA/cm(2), which was nearly 4 times greater than that of analogous, unsupported platinum nanotubes and 7 times greater than that of commercial supported platinum nanoparticles.

Nonspherical noble metal nanoparticles: colloid-chemical synthesis and morphology control

Metal nanoparticles have been the subject of widespread research over the past two decades. In recent years, noble metals have been the focus of numerous studies involving synthesis, characterization, and applications. Synthesis of an impressive range of noble metal nanoparticles with varied morphologies has been reported. Researchers have made a great progress in learning how to engineer materials on a nanometer length scale that has led to the understanding of the fundamental size- and shape-dependent properties of matter and to devising of new applications. In this article, we review the recent progress in the colloid-chemical synthesis of nonspherical nanoparticles of a few important noble metals (mainly Ag, Au, Pd, and Pt), highlighting the factors that influence the particle morphology and discussing the mechanisms behind the nonspherical shape evolution. The article attempts to present a thorough discussion of the basic principles as well as state-of-the-art morphology control in noble metal nanoparticles.

Synthesis of platinum cubes, polypods, cuboctahedrons, and raspberries assisted by cobalt nanocrystals

The introduction of metallic traces into the synthesis of platinum nanocrystals (Pt NCs) has been investigated as a surfactant-independent means of controlling shape. Various nanocrystal morphologies have been produced without modification of the reaction conditions, composition, and concentration other than the presence of cobalt traces (<5%). In the presence of metallic cobalt (a strong reducer for Pt cations) cubic Pt NCs are obtained, while cobalt ions or gold NCs have no effect on the synthesis, and as a result, polypods are obtained. Intermediate shapes such as cemented cubes or cuboctahedron NCs are also obtained under similar conditions. Thus, various NC shapes can be obtained with subtle changes, which illustrates the high susceptibility and mutability of the NC shape to modification of the reaction kinetics during the early reduction process. Our studies help progress toward a general mechanism for nanocrystal shape control.

Synthesis of Porous Single-Crystalline Platinum Nanocubes Composed of Nanoparticles

Single-crystalline platinum nanocubes with porous morphology were synthesized for the first time by using ethylene glycol, HCl, and polyvinylpyrrolidone as the reducing agents of H2PtCl6. The morphology and size distribution of the Pt particles formed were studied with a high-resolution transmission electron microscope and selected-area electron diffraction pattern. By controlling the material concentrations and reaction temperature and period, Pt single crystals about 5 nm in size were formed in the first stage of the reduction process that had {100} facets, which were stacked one on top of the other, forming porous nanocubes 20-80 nm in length. The synthesized Pt nanocubes exhibited enhanced catalytic activity for methanol oxidation.

Density functional theory for transition metals and transition metal chemistry

We introduce density functional theory and review recent progress in its application to transition metal chemistry. Topics covered include local, meta, hybrid, hybrid meta, and range-separated functionals, band theory, software, validation tests, and applications to spin states, magnetic exchange coupling, spectra, structure, reactivity, and catalysis, including molecules, clusters, nanoparticles, surfaces, and solids.

Gold nanospikes formed through a simple electrochemical route with high electrocatalytic and surface enhanced Raman scattering activity

We demonstrate a simple electrochemical route to produce uniformly sized gold nanospikes without the need for a capping agent or prior modification of the electrode surface, which are predominantly oriented in the {111} crystal plane and exhibit promising electrocatalytic and SERS properties.