Layering and shear properties of an ionic liquid, 1-ethyl-3-methylimidazolium ethylsulfate, confined to nano-films between mica surfaces

Influence of Water on Structure, Dynamics, and Electrostatics of Hydrophilic and Hydrophobic Ionic Liquids in Charged and Hydrophilic Confinement between Mica Surfaces

Water is ubiquitous in the environment and is the origin for operational constraints in ionic-liquid based electrolytes for supercapacitors. In this study, the influence of water on the interfacial behavior of hydrophilic (1-ethyl-3-methylimidazolium ethylsulfate, abbr. [EMIM][EtSO₄]) and hydrophobic (1-ethyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, abbr. [EMIM][FAP] and [EMIM][TFSI], respectively) ionic liquids (ILs) confined between mica surfaces was investigated at separations precisely modulated by a surface force apparatus and at controlled relative humidity between 0% and 50% RH. Diffusion experiments revealed that water spontaneously invades the nanoconfined ILs above a certain humidity threshold and that the confined hydrophobic IL is completely replaced by water at sufficiently high environmental humidity (∼45% here) as a result of surface-induced phase separation. This behavior is expected to be universal for other ILs that are not fully miscible with water when they are confined in hydrophilic nanopores of a few nanometers in width. The effect of environmental humidity on interfacial structure, dynamics, and electrostatics was studied via dynamic force measurements. In the dry state, several layers of ions are immobilized on the mica surface, and the effective viscosity increases by up to 2 orders of magnitude with a decrease in film thickness from ∼10 to ∼3 nm. Based on recent work, it is proposed that nanoconfinement enhances the anion-cation association in highly concentrated electrolytes, thereby justifying the loss of fluidity of the ILs. When phase separation is excluded, water is intercalated in the layered structure of the three ILs, and it leads to a change of the layer thickness compared to the dry state. Furthermore, our results reveal that interfacial water prevents ions from being immobilized on the surface and facilitates the outflow of both hydrophilic and hydrophobic ILs by reducing their effective viscosity in the order [EMIM][FAP] < [EMIM][TFSI] < [EMIM][EtSO₄]. The underlying mechanisms are evaluated by considering the roles of water in enhancing ion dissociation through screening of electrostatic interactions and solvation of the selected ILs to different extents. The discussed experimental observations support the recent discoveries made by molecular dynamic simulations and neutron scattering studies that using hydrophilic ILs coupled with water as cosolvent could lead to the enhanced power density of IL-based supercapacitors, and therefore, that water-in-(hydrophilic) ILs is a direction worth exploring as electrolytes for supercapacitors.

Electrical Double Layer of Supported Atomically Thin Materials

The electrical double layer (EDL), consisting of two parallel layers of opposite charges, is foundational to many interfacial phenomena and unique in atomically thin materials. An important but unanswered question is how the "transparency" of atomically thin materials to their substrates influences the formation of the EDL. Here, we report that the EDL of graphene is directly affected by the surface energy of the underlying substrates. Cyclic voltammetry and electrochemical impedance spectroscopy measurements demonstrate that graphene on hydrophobic substrates exhibits an anomalously low EDL capacitance, much lower than what was previously measured for highly oriented pyrolytic graphite, suggesting disturbance of the EDL ("disordered EDL") formation due to the substrate-induced hydrophobicity to graphene. Similarly, electrostatic gating using EDL of graphene field-effect transistors shows much lower transconductance levels or even no gating for graphene on hydrophobic substrates, further supporting our hypothesis. Molecular dynamics simulations show that the EDL structure of graphene on a hydrophobic substrate is disordered, caused by the disruption of water dipole assemblies. Our study advances understanding of EDL in atomically thin limit.

Electrostatic Screening Length in Concentrated Salt Solutions

Thin films (0-30 nm) of very concentrated aqueous monovalent salt solutions (2-10 M of LiCl, NaCl, and CsCl) were examined to determine how ionic strength affects the screening length of the electrostatic potential. Measurements were consistent with a screening length in the range of 3-12 nm. The screening length increased monotonically as a function of salt concentration, and the rate of increase was a function of the monovalent salt type. The results were incompatible with the Debye length of Poisson-Boltzmann theory but consistent with previous measurements of surface forces. The screening length was determined from the surface excess of fluorescein, a dianion under basic conditions, which was present in trace amounts in the thin film and detected via its fluorescence emission. That is, we directly observed that the ion concentration in very concentrated solutions is perturbed far from an interface.

Ionic Conductivity in Ionic Liquid Nano Thin Films

Thin film approaches are powerful methods for gaining a nanoscale understanding of interfacial ionic liquids (ILs) in the vicinity of solids. These approaches are used to directly elucidate the interfacial contributions to the physical properties of ILs as nanoscale thin films have significant proportions of the surface or interface region with respect to their total volume. Here, we report the growth of a uniform [emim][TFSA] thin film ionic liquid on a chemically modified, well-wettable sapphire, thereby allowing the in situ measurement of its ionic conductivity on the nanoscale. We observed the thickness-dependent behavior of the ionic conductivity, which gradually decreased especially when the thickness was less than 10 nm, and found it to be quantitatively analyzed well by using an empirical two-layer model. The molecular dynamics (MD) simulations show that the thickness-dependent ionic conductivity originates from the solid-like structuring of the IL near the substrate, reproducing a thickness-dependent ionic conductivity. The MD simulation results suggest that the thickness of the low conductivity region determined in the two-layer model should roughly correspond to the thickness of the solid-like structuring of the IL near the substrate.

From Molecular Arrangement to Macroscopic Wetting of Ionic Liquids on the Mica Surface: Effect of Humidity

To optimize the wetting performance of ionic liquids (ILs) on solid surfaces, which is important in catalysis, lubrication, and energy storage, it is critical to control the molecular arrangement of ILs at the IL/solid interface. Here, we report our experimental results, showing that tuning humidity is a facile and effective approach manipulating the molecular arrangement and thus controlling the macroscopic wettability of ILs on the mica surface. Fourier transform infrared spectroscopy, contact angle testing, and atomic force microscopy results showed that with the increase of humidity, more water adsorbs on the mica surface, which dissolves and mobilizes K⁺ on the mica. As a result, the cations of ILs occupy the empty spot left by the K⁺ and initiate the layering of ILs. The water-enabled ion exchange and IL layering processes result in not only the decrease of the IL contact angle on the mica but also the time-dependent contact angle. The finding here potentially provides a new dimension tailoring the performance of ILs at the IL/solid interface.

Molecular Mechanisms Underlying Lubrication by Ionic Liquids: Activated Slip and Flow

The present study provides molecular insight into the mechanisms underlying energy dissipation and lubrication of a smooth contact lubricated by an ionic liquid. We have performed normal and lateral force measurements with a surface forces apparatus and by colloidal probe atomic force microscopy on the following model systems: 1-ethyl-3-methyl imidazolium bis-(trifluoro-methylsulfonyl) imide, in dry state and in equilibrium with ambient (humid) air; the surface was either bare mica or functionalized with a polymer brush. The velocity-dependence of the friction force reveals two different regimes of lubrication, boundary-film lubrication, with distinct characteristics for each model system, and fluid-film lubrication above a transition velocity V∗. The underlying mechanisms of energy dissipation are evaluated with molecular models for stress-activated slip and flow, respectively. The stress-activated slip assumes that two boundary layers (composed of ions/water strongly adsorbed to the surface) slide past each other; the dynamics of interionic interactions at the slip plane and the strength of the interaction dictate the change in friction -decreasing, increasing or remaining constant- with velocity in the boundary-film lubrication regime. Above a transition velocity V∗, friction monotonically increases with velocity in the three model systems. Here, multiple layers of ions slide past each other (“flow”) under a shear stress and friction depends on a shear-activation volume that is significantly affected by confinement. The proposed friction model provides a molecular perspective of the lubrication of smooth contacts by ionic liquids and allows identifying the physical parameters that control friction.

Influence of Salt on Supramolecular Oscillatory Structural Forces and Stratification in Micellar Freestanding Films

Freestanding films of soft matter containing micelles, nanoparticles, polyelectrolyte-surfactant complexes, bilayers, and smectic liquid crystals exhibit stratification. Stepwise thinning and coexisting thick-thin regions associated with drainage via stratification are attributed to the confinement-induced structuring and layering of supramolecular structures, which contribute supramolecular oscillatory structural forces. In freestanding micellar films, formed by a solution of an ionic surfactant above its critical micelle concentration, both interfacial adsorption and the micelle size and shape are determined by the concentration of surfactant and of added electrolytes. Although the influence of surfactant concentration on stratification has been investigated before, the influence of added salt, at concentrations typically found in water used on a daily basis, has not been investigated yet. In this contribution, we elucidate how the addition of salt affects stepwise thinning: step size, number of steps, as well as the shape and size of nanoscopic nonflat structures such as mesas in micellar foam films formed with aqueous solutions of anionic surfactant (sodium dodecyl sulfate (SDS)). The nanoscopic thickness variations and transitions are visualized and analyzed using IDIOM (Interferometry Digital Imaging Optical Microscopy) protocols with exquisite spatiotemporal resolution (thickness ∼1 nm, time <1 ms). In contrast to nanoparticle dispersions that show no influence of salt on step size, we find that the addition of salt to micellar freestanding films results in a decrease in step size as well as the number of stepwise transitions, in addition to changes in nucleation and growth of mesas, all driven by the corresponding change in supramolecular oscillatory structural forces.

Direct measurements of ionic liquid layering at a single mica-liquid interface and in nano-films between two mica-liquid interfaces

The layering of ionic liquids close to flat, charged interfaces has been identified previously through theoretical and some experimental measurements. Here we present evidence for oscillations in ion density ('layering') in a long chain ionic liquid (1-decyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide) near the interface with mica using two complementary approaches. Neutron reflection at the ionic liquid-mica interface is used to detect structure at a single interface, and surface force balance (SFB) measurements carried out with the same ionic liquid reveal oscillatory density in the liquid confined between two mica sheets. Our findings imply the interfacial structure is not induced by confinement alone. Structural forces between two mica surfaces extend to approximately twice the distance of the density oscillations measured at a single interface and have similar period in both cases.

Are Ionic Liquids Good Boundary Lubricants? A Molecular Perspective

The application of ionic liquids as lubricants has attracted substantial interest over the past decade and this has produced a rich literature. The aim of this review is to summarize the main findings about frictional behavior of ionic liquids in the boundary lubrication regime. We first recall why the unusual properties of ionic liquids make them very promising lubricants, and the molecular mechanisms at the origin of their lubricating behavior. We then point out the main challenges to be overcome in order to optimise ionic liquid lubricant performance for common applications. We finally discuss their use in the context of electroactive lubrication.

Interfacial structure and structural forces in mixtures of ionic liquid with a polar solvent

Oscillatory and monotonic decay in mixtures of salt and solvent at interfaces with varying surface charge.

Nano-mechanics of ionic liquids at dielectric and metallic interfaces

Using a dynamic surface force apparatus, we investigate the nano-mechanics and the nano-rheology of an ionic liquid at dielectric and metallic solid surfaces.

The Au(111)/IL interfacial nanostructure in the presence of precursors and its influence on the electrodeposition process

Ionic liquids have attracted significant interest as electrolytes for the electrodeposition of metals and semiconductors, but the details of the deposition processes are not yet well understood.

X-Ray diffraction and resonance shear measurement of nano-confined ionic liquids

The X-ray diffraction and resonance shear measurement (RSM) demonstrated the relation between the structure and lubrication properties of ionic liquid ([C₄mim][NTf₂], [C₄mim][BF₄]) films of nanometer thickness confined between silica surfaces.

Role of Electrical Double Layer Structure in Ionic Liquid Gated Devices

Ionic liquid gating of transition metal oxides has enabled new states (magnetic, electronic, metal-insulator), providing fundamental insights into the physics of strongly correlated oxides. However, despite much research activity, little is known about the correlation of the structure of the liquids in contact with the transition metal oxide surface, its evolution with the applied electric potential, and its correlation with the measured electronic properties of the oxide. Here, we investigate the structure of an ionic liquid at a semiconducting oxide interface during the operation of a thin film transistor where the electrical double layer gates the device using experiment and theory. We show that the transition between the ON and OFF states of the amorphous indium gallium zinc oxide transistor is accompanied by a densification and preferential spatial orientation of counterions at the oxide channel surface. This process occurs in three distinct steps, corresponding to ion orientations, and consequently, regimes of different electrical conductivity. The reason for this can be found in the surface charge densities on the oxide surface when different ion arrangements are present. Overall, the field-effect gating process is elucidated in terms of the interfacial ionic liquid structure, and this provides unprecedented insight into the working of a liquid gated transistor linking the nanoscopic structure to the functional properties. This knowledge will enable both new ionic liquid design as well as advanced device concepts.

Self-Organization of Ions at the Interface between Graphene and Ionic Liquid DEME-TFSI

Electrochemical effects manifest as nonlinear responses to an applied electric field in electrochemical devices, and are linked intimately to the molecular orientation of ions in the electric double layer (EDL). Herein, we probe the origin of the electrochemical effect using a double-gate graphene field effect transistor (GFET) of ionic liquid N,N-diethyl-N-(2-methoxyethyl)-N-methylammonium bis(trifluoromethylsulfonyl)imide (DEME-TFSI) top-gate, paired with a ferroelectric Pb_0.92La_0.08Zr_0.52Ti_0.48O₃ (PLZT) back-gate of compatible gating efficiency. The orientation of the interfacial molecular ions can be extracted by measuring the GFET Dirac point shift, and their dynamic response to ultraviolet-visible light and a gate electric field was quantified. We have observed that the strong electrochemical effect is due to the TFSI anions self-organizing on a treated GFET surface. Moreover, a reversible order-disorder transition of TFSI anions self-organized on the GFET surface can be triggered by illuminating the interface with ultraviolet-visible light, revealing that it is a useful method to control the surface ion configuration and the overall performance of the device.

Ionic liquids-mediated interactions between nanorods

Surface forces mediated by room-temperature ionic liquids (RTILs) play an essential role in diverse applications including self-assembly, lubrication, and electrochemical energy storage. Therefore, their fundamental understanding is critical. Using molecular simulations, we study the interactions between two nanorods immersed in model RTILs at rod-rod separations where both structural and double layer forces are important. The interaction force between neutral rods oscillates as the two rods approach each other, similar to the classical structural forces. Such oscillatory force originates from the density oscillation of RTILs near each rod and is affected by the packing constraints imposed by the neighboring rods. The oscillation period and decay length of the oscillatory force are mainly dictated by the ion density distribution near isolated nanorods. When charges are introduced on the rods, the interaction force remains short-range and oscillatory, similar to the interactions between planar walls mediated by some protic RTILs reported earlier. Nevertheless, introducing net charges to the rods greatly changes the rod-rod interactions, e.g., by delaying the appearance of the first force trough and increasing the oscillation period and decay length of the interaction force. The oscillation period and decay length of the oscillatory force and free energy are commensurate with those of the space charge density near an isolated, charged rod. The free energy of rod-rod interactions reaches local minima (maxima) at rod-rod separations when the space charges near the two rods interfere constructively (destructively). The insight on the short-range interactions between nanorods in RTILs helps guide the design of novel materials, e.g., ionic composites based on rigid-rod polyanions and RTILs.

Imidazolium-based ionic liquids used as additives in the nanolubrication of silicon surfaces

In recent years, with the development of micro/nanoelectromechanical systems (MEMS/NEMS), the demand for efficient lubricants of silicon surfaces intensified. Although the use of ionic liquids (ILs) as additives to base oils in the lubrication of steel/steel or other types of metal/ metal tribological pairs has been investigated, the number of studies involving Si is very low. In this work, we tested imidazolium-based ILs as additives to the base oil polyethylene glycol (PEG) to lubricate Si surfaces. The friction coefficients were measured in a nanotribometer. The viscosity of the PEG + IL mixtures as well as their contact angles on the Si surface were measured. The topography and chemical composition of the substrates surfaces were determined with atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), respectively. Due to the hygroscopic properties of PEG, the first step was to assess the effect of the presence of water. Then, a series of ILs based on the cations 1-ethyl-3-methylimidazolium [EMIM], 1-butyl-3-methylimidazolium [BMIM], 1-ethyl-3-vinylimidazolium [EVIM], 1-(2-hydroxyethyl)-3-methylimidazolium [C₂OHMIM] and 1-allyl-3-methylimidazolium [AMIM] combined with the anions dicyanamide [DCA], trifluoromethanesulfonate [TfO], and ethylsulfate [EtSO₄] were added to dry PEG. All additives (2 wt %) led to a decrease in friction coefficient as well as an increase in viscosity (with the exception of [AMIM][TfO]) and improved the Si wettability. The additives based on the anion [EtSO₄] exhibited the most promising tribological behavior, which was attributed to the strong interaction with the Si surface ensuring the formation of a stable surface layer, which hinders the contact between the sliding surfaces.

Advanced Materials Based on Polymers and Ionic Liquids

Ionic liquids (ILs) are ambient temperature molten salts, which have attracted considerable attention owing to their unique properties. In this contribution, we review advanced materials composed of ILs and polymers for the basis of a new design protocol to fabricate novel materials. As electrolytes for electrochemical devices, cross-linked polymers containing ILs (ion gels) are endowed with functional properties inherited from ILs and mechanical consistency derived from polymers. To create such materials, micro-phase separation of block copolymers and colloidal arrays in the ILs are utilized. Based on the molecular design of task-specific ILs, the resultant ion gels are applicable as electrolytes for actuator, fuel cell, and secondary battery applications. Thermo- and photo-responsive polymers in ILs are also highlighted, whereby such stimuli elicit changes in the solubility of the self-assembly of block copolymers and colloidal arrays in the ILs. Further, thermo- and photo-reversible changes in the self-assembled structure can be exploited to demonstrate sol-gel transitions and fabricate photo-healable materials.

Surface Ordering in Binary Mixtures of Protic Ionic Liquids

The surface composition of binary mixtures of the protic ionic liquids ethylammonium nitrate and propylammonium nitrate has been investigated using surface tension measurements and the perfectly surface sensitive method metastable induced electron spectroscopy. Given that the latter technique is sensitive only to the outermost layer, it allows for the determination of the surface fraction occupied by a given species. The piecewise linear relationship between surface fraction and surface tension found in this study can be described by a phase separation within the surface layer.

Disorder from the Bulk Ionic Liquid in Electric Double Layer Transistors

Ionic liquid gating has a number of advantages over solid-state gating, especially for flexible or transparent devices and for applications requiring high carrier densities. However, the large number of charged ions near the channel inevitably results in Coulomb scattering, which limits the carrier mobility in otherwise clean systems. We develop a model for this Coulomb scattering. We validate our model experimentally using ionic liquid gating of graphene across varying thicknesses of hexagonal boron nitride, demonstrating that disorder in the bulk ionic liquid often dominates the scattering.

Chemical physics of electroactive materials: concluding remarks

It is an honour to be charged with providing the concluding remarks for a Faraday Discussion. As many have remarked before, it is nonetheless a prodigious task, and what follows is necessarily a personal, and probably perverse, view of a watershed event in the Chemical Physics of Electroactive materials. The spirit of the conference was captured in a single sentence during the meeting itself."It is the nexus between rheology, electrochemistry, colloid science and energy storage". The current scientific climate is increasingly dominated by a limited number of global challenges, and there is thus a tendency for research to resemble a football match played by 6 year olds, where everyone on the field chases the (funding) ball instead of playing to their "discipline". It is thus reassuring to see how the application of rigorous chemical physics is leading to ingenious new solutions for both energy storage and harvesting, via, for example, nanoactuation, electrowetting, ionic materials and nanoplasmonics. In fact, the same language of chemical physics allows seamless transition between applications as diverse as mechano-electric energy generation, active moisture transport and plasmonic shutters - even the origins of life were addressed in the context of electro-autocatalysis!

Controlling turbulent drag across electrolytes using electric fields

Reversible in operando control of friction is an unsolved challenge that is crucial to industrial tribology. Recent studies show that at low sliding velocities, this control can be achieved by applying an electric field across electrolyte lubricants. However, the phenomenology at high sliding velocities is yet unknown. In this paper, we investigate the hydrodynamic friction across electrolytes under shear beyond the transition to turbulence. We develop a novel, highly parallelised numerical method for solving the coupled Navier-Stokes Poisson-Nernst-Planck equation. Our results show that turbulent drag cannot be controlled across dilute electrolytes using static electric fields alone. The limitations of the Poisson-Nernst-Planck formalism hint at ways in which turbulent drag could be controlled using electric fields.

Structural interactions in ionic liquids linked to higher-order Poisson-Boltzmann equations

We present a derivation of generalized Poisson-Boltzmann equations starting from classical theories of binary fluid mixtures, employing an approach based on the Legendre transform as recently applied to the case of local descriptions of the fluid free energy. Under specific symmetry assumptions, and in the linearized regime, the Poisson-Boltzmann equation reduces to a phenomenological equation introduced by Bazant et al. [Phys. Rev. Lett. 106, 046102 (2011)]PRLTAO0031-900710.1103/PhysRevLett.106.046102, whereby the structuring near the surface is determined by bulk coefficients.

Ionic Liquids for Supercapacitor Applications

Supercapacitors are electrochemical energy storage devices in which the charge is accumulated through the adsorption of ions from an electrolyte on the surface of the electrode. Because of their large ionic concentrations, ionic liquids have widely been investigated for such applications. The main properties that have to be optimized are the electrochemical window, the electrical conductivity, and the interfacial capacitances. Ionic liquids allow a significant improvement of the former, but they suffer from their high viscosity. In this review, I will discuss the advantages and the inconvenience of using ionic liquids in supercapacitors. Some innovative approaches using mixtures of ionic liquids or redox-active ions will also be critically addressed.

Switching the Structural Force in Ionic Liquid-Solvent Mixtures by Varying Composition

The structure and interactions in electrolytes at high concentration have implications from energy storage to biomolecular interactions. However, many experimental observations are yet to be explained in these mixtures, which are far beyond the regime of validity of mean-field models. Here, we study the structural forces in a mixture of ionic liquid and solvent that is miscible in all proportions at room temperature. Using the surface force balance to measure the force between macroscopic smooth surfaces across the liquid mixtures, we uncover an abrupt increase in the wavelength above a threshold ion concentration. Below the threshold concentration, the wavelength is determined by the size of the solvent molecule, whereas above the threshold, it is the diameter of a cation-anion pair that determines the wavelength.

Physicochemical and tribophysical properties of trioctylalkylammonium bis(salicylato)borate (N888n-BScB) ionic liquids: effect of alkyl chain length

The alkyl chain length in trioctylalkylammonium bis(salicylato)borate ionic liquids plays an important role in controlling the viscosity, friction and wear characteristics.

Underscreening in concentrated electrolytes

Screening of a surface charge by an electrolyte and the resulting interaction energy between charged objects is of fundamental importance in scenarios from bio-molecular interactions to energy storage. The conventional wisdom is that the interaction energy decays exponentially with object separation and the decay length is a decreasing function of ion concentration; the interaction is thus negligible in a concentrated electrolyte. Contrary to this conventional wisdom, we have shown by surface force measurements that the decay length is an increasing function of ion concentration and Bjerrum length for concentrated electrolytes. In this paper we report surface force measurements to test directly the scaling of the screening length with Bjerrum length. Furthermore, we identify a relationship between the concentration dependence of this screening length and empirical measurements of activity coefficient and differential capacitance. The dependence of the screening length on the ion concentration and the Bjerrum length can be explained by a simple scaling conjecture based on the physical intuition that solvent molecules, rather than ions, are charge carriers in a concentrated electrolyte.

Long range electrostatic forces in ionic liquids

Experimental evidence for long range surface forces in ionic liquids is collated and examined, key outstanding questions are identified, and possible mechanisms underpinning these long range forces are explored.

Dynamic shear force microscopy of confined liquids at a gold electrode

The confinement of liquids in nanometer-scale gaps can lead to changes in their viscous shear properties. For liquids of polar molecules, the charge state of the confining surfaces has a significant influence on the structure in the confined liquid. Here we report on the implementation of dynamic shear force microscopy in an electrochemical cell. Lateral oscillations of the tip of an atomic force microscope were magnetically activated at a frequency of about 50 kHz. The damping of the lateral tip oscillation was recorded as a function of the tip–sample distance and of the electrode potential at the surface of a Au(100) single crystal electrode. The influence of surface charges on the shear response of the nano-confined liquids was demonstrated for the ionic liquid [EMIM][NTf₂] and for aqueous Na₂SO₄ solution.

Switchable long-range double layer force observed in a protic ionic liquid

A repulsive double layer force has been measured for ethylammonium nitrate (EAN) at 373 K and 393 K, which is absent at lower temperatures.

Is the boundary layer of an ionic liquid equally lubricating at higher temperature?

Atomic force microscopy has been used to study the effect of temperature on normal forces and friction for the room temperature ionic liquid (IL) ethylammonium nitrate (EAN), confined between mica and a silica colloid probe at 25 °C, 50 °C, and 80 °C. Force curves revealed a strong fluid dynamic influence at room temperature, which was greatly reduced at elevated temperatures due to the reduced liquid viscosity. A fluid dynamic analysis reveals that bulk viscosity is manifested at large separation but that EAN displays a nonzero slip, indicating a region of different viscosity near the surface. At high temperatures, the reduction in fluid dynamic force reveals step-like force curves, similar to those found at room temperature using much lower scan rates. The ionic liquid boundary layer remains adsorbed to the solid surface even at high temperature, which provides a mechanism for lubrication when fluid dynamic lubrication is strongly reduced. The friction data reveals a decrease in absolute friction force with increasing temperature, which is associated with increased thermal motion and reduced viscosity of the near surface layers but, consistent with the normal force data, boundary layer lubrication was unaffected. The implications for ILs as lubricants are discussed in terms of the behaviour of this well characterised system.

Fundamental aspects of electric double layer force-distance measurements at liquid-solid interfaces using atomic force microscopy

Atomic force microscopy (AFM) force-distance measurements are used to investigate the layered ion structure of Ionic Liquids (ILs) at the mica surface. The effects of various tip properties on the measured force profiles are examined and reveal that the measured ion position is independent of tip properties, while the tip radius affects the forces required to break through the ion layers as well as the adhesion force. Force data is collected for different ILs and directly compared with interfacial ion density profiles predicted by molecular dynamics. Through this comparison it is concluded that AFM force measurements are sensitive to the position of the ion with the larger volume and mass, suggesting that ion selectivity in force-distance measurements are related to excluded volume effects and not to electrostatic or chemical interactions between ions and AFM tip. The comparison also revealed that at distances greater than 1 nm the system maintains overall electroneutrality between the AFM tip and sample, while at smaller distances other forces (e.g., van der waals interactions) dominate and electroneutrality is no longer maintained.

The Electrostatic Screening Length in Concentrated Electrolytes Increases with Concentration

According to classical electrolyte theories interactions in dilute (low ion density) electrolytes decay exponentially with distance, with the Debye screening length the characteristic length scale. This decay length decreases monotonically with increasing ion concentration due to effective screening of charges over short distances. Thus, within the Debye model no long-range forces are expected in concentrated electrolytes. Here we reveal, using experimental detection of the interaction between two planar charged surfaces across a wide range of electrolytes, that beyond the dilute (Debye-Hückel) regime the screening length increases with increasing concentration. The screening lengths for all electrolytes studied-including aqueous NaCl solutions, ionic liquids diluted with propylene carbonate, and pure ionic liquids-collapse onto a single curve when scaled by the dielectric constant. This nonmonotonic variation of the screening length with concentration, and its generality across ionic liquids and aqueous salt solutions, demonstrates an important characteristic of concentrated electrolytes of substantial relevance from biology to energy storage.

Long-Range Ordering of Ionic Liquid Fluid Films

We report the transformation of ionic liquid films from isotropic bulk to a fluid-ordered state over micrometer length scales. Data from infrared and nonlinear spectroscopy measurements show clear transitions that, for varying ionic liquids, occur over time frames of 10 min to 2 h. These maturation times depend linearly on the chosen ionic liquids' bulk viscosities. Interestingly, the ionic liquids do not form solids upon ordering but do exhibit strong preferential alignments of molecules that persist throughout the fluid films' thicknesses. Our measurements characterize this ordering process and show that it is largely insensitive to substrate surface chemistry or small amounts of absorbed water. Additional experiments show the transition is observed across several of the most common ionic liquid cations and that the process is completely reversible. The driving force for this organization is attributed to electrostatic and steric forces combined with a slow shearing of the viscous ionic liquid. These interactions work together to slowly bring the molecules within the film to a preferred, global orientation. The physical length and time scales of this transformation are unexpected and intriguing and invite additional studies to develop an understanding and control of ionic liquid materials' behavior, particularly near surfaces, to benefit their uses in lubrication, capacitive energy storage, and heterogeneous catalysis.

Layering of ionic liquids on rough surfaces

Understanding the behavior of ionic liquids (ILs) either confined between rough surfaces or in rough nanoscale pores is of great relevance to extend studies performed on ideally flat surfaces to real applications. In this work we have performed an extensive investigation of the structural forces between two surfaces with well-defined roughness (<9 nm RMS) in 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide by atomic force microscopy. Statistical studies of the measured layer thicknesses, layering force, and layering frequency reveal the ordered structure of the rough IL-solid interface. Our work shows that the equilibrium structure of the interfacial IL strongly depends on the topography of the contact.

Ionic Grease Lubricants: Protic [Triethanolamine][Oleic Acid] and Aprotic [Choline][Oleic Acid]

Ionic liquid lubricants or lubricant additives have been studied intensively over past decades. However, ionic grease serving as lubricant has rarely been investigated so far. In this work, novel protic [triethanolamine][oleic acid] and aprotic [choline][oleic acid] ionic greases are successfully synthesized. These ionic greases can be directly used as lubricants without adding thickeners or other additives. Their distinct thermal and rheological properties are investigated and are well-correlated to their tribological properties. It is revealed that aprotic ionic grease shows superior temperature- and pressure-tolerant lubrication properties over those of protic ionic grease. The lubrication mechanism is studied, and it reveals that strong physical adsorption of ionic grease onto friction surface plays a dominating role for promoted lubrication instead of tribo-chemical film formation.

Metal ion adsorption at the ionic liquid-mica interface

Mica has been employed in many studies of ionic liquid (IL) interfaces on account of its atomic smoothness and well defined surface properties. However, until now it has been unclear whether ions dissolved in ILs can compete with the IL cation and adsorb to mica charge sites. In this work amplitude modulated atomic force microscopy (AM-AFM) has been used to probe metal ion adsorption at the interface of mica with propylammonium nitrate (PAN), a room temperature IL. Lithium, sodium, potassium, magnesium and calcium nitrate salts were added to PAN at a concentration of ∼60 mM. Aluminum nitrate was also investigated, but only at 5 mM because its solubility in PAN is much lower. The AM-AFM images obtained when the metal ions were present are strikingly different to that of pure PAN, indicating that the ions compete effectively with the propylammonium cation and adsorb to negatively charged sites on the mica surface despite their much lower concentration. This is a consequence of electrostatic attractions between the mica charge sites and the metal ions being significantly stronger than for the propylammonium cation; compared to the metal ions the propylammonium charged group is relatively constrained sterically. A distinct honeycomb pattern is noted for the PAN + Al(3+) system, less obviously for the divalent ions and not at all for monovalent ions. This difference is attributed to the strength of electrostatic interactions between metal ions and mica charge sites increasing with the ion charge, which means that divalent and (particularly) trivalent ions are located more precisely above the charged sites of the mica lattice. The images obtained allow important distinctions between metal ion adsorption at mica-water and mica-PAN interfaces to be made.