2D Transition Metal Dichalcogenides for Photocatalysis

Two-dimensional (2D) transition metal dichalcogenides (TMDs), a rising star in the post-graphene era, are fundamentally and technologically intriguing for photocatalysis. Their extraordinary electronic, optical, and chemical properties endow them as promising materials for effectively harvesting light and catalyzing the redox reaction in photocatalysis. Here, we present a tutorial-style review of the field of 2D TMDs for photocatalysis to educate researchers (especially the new-comers), which begins with a brief introduction of the fundamentals of 2D TMDs and photocatalysis along with the synthesis of this type of material, then look deeply into the merits of 2D TMDs as co-catalysts and active photocatalysts, followed by an overview of the challenges and corresponding strategies of 2D TMDs for photocatalysis, and finally look ahead this topic.

Research Progress of Tungsten Oxide-Based Catalysts in Photocatalytic Reactions

Photocatalysis technology is a potential solution to solve the problem of environmental pollution and energy shortage, but its wide application is limited by the low efficiency of solar energy conversion. As a non-toxic and inexpensive n-type semiconductor, WO3 can absorb approximately 12% of sunlight which is considered one of the most attractive photocatalytic candidates. However, the narrow light absorption range and the high recombination rate of photogenerated electrons and holes restrict the further development of WO3-based catalysts. Herein, the studies on preparation and modification methods such as doping element, regulating defects and constructing heterojunctions to enlarge the range of excitation light to the visible region and slow down the recombination of carriers on WO3-based catalysts so as to improve their photocatalytic performance are reviewed. The mechanism and application of WO3-based catalysts in the dissociation of water, the degradation of organic pollutants, as well as the hydrogen reduction of N2 and CO2 are emphatically investigated and discussed. It is clear that WO3-based catalysts will play a positive role in the field of future photocatalysis. This paper could also provide guidance for the rational design of other metallic oxide (MOx) catalysts for the increasing conversion efficiency of solar energy.

Synthesis of hierarchical Cd-Ni-MOF micro/nanostructures and derived Cd-Ni-MOF/CdS/NiS hybrid photocatalysts for efficient photocatalytic hydrogen evolution

Hierarchical micro/nanostructures assembled from nanorods and nanosheets have become promising candidates for photocatalysis. In this work, a series of hierarchical Cd-Ni-MOF micro/nanostructures, assembled from nanosheets and nanorods, were fabricated via a two-step solvothermal process involving the partial replacement of Ni²⁺ with Cd²⁺ in the Ni-MOF-74 structure. Different morphologies were obtained by considering different volume ratios of DMF and ethanol as the solvent during synthesis. Hierarchical Cd-Ni-MOF-T/CdS/NiS hybrid micro/nanostructures were synthesized by Ni²⁺ and Cd²⁺ exchange of Cd-Ni-MOFs with S^2-. The as-prepared samples, which were composed of thin nanosheets alone, exhibited the best photocatalytic H₂ evolution rate of about 40.08 mmol g^-1 h^-1. The p-n junction between CdS and NiS was found to be beneficial for the migration of photogenerated electrons from the conduction band (CB) of NiS to the CB of CdS. The heterojunction between CdS and Cd-Ni-MOF-T further promoted the transfer of an electron from the CB of CdS to the CB of Cd-Ni-MOF-T. Thus, this study demonstrated that hierarchical Cd-Ni-MOF-T/CdS/NiS architectures have a large specific surface area, leading to significantly improved photocatalytic activity.

Bandgap engineering approach for designing CuO/Mn3O4/CeO2 heterojunction as a novel photocatalyst for AOP-assisted degradation of Malachite green dye

A ternary nanohybrid CuO/Mn₃O₄/CeO₂ was developed in the present work using a co-precipitation-assisted hydrothermal method. The designed photocatalyst's structural, morphology, elemental composition, electronic states of elements, and optical properties were studied using corresponding analytical techniques. Results from PXRD, TEM/HRTEM, XPS, EDAX, and PL showed that the desired nanostructure had formed. Using Tauc's energy band gap plot, it was determined that the nanostructures band gap was ~ 2.44 eV, which showed the band margins of the various moieties, CeO₂, Mn₃O₄, and CuO, had modified. Thus, improved redox conditions led to a substantial decrease in the recombination rate of electron-hole pairs, which was further explained by a PL study in that charge separation plays a key role. Under exposure to visible light irradiation for 60 min, it was revealed that the photocatalyst achieved 98.98% of photodegradation efficiency for malachite green (MG) dye. The process of photodegradation proceeded according to a pseudo-first-order reaction kinetic model with an excellent rate of reaction of 0.07295 min^-1 with R² = 0.99144. The impacts of different reaction variables, inorganic salts, and water matrices were investigated. This research seeks to create a ternary nanohybrid photocatalyst with high photostability, visible spectrum activity, and reusability up to four cycles.

Synergetic Effect of Fe2O3 Doped-CeO2 Nanocomposites Prepared via Different Techniques on Photocatalytic Desulfurization of Heavy Gas Oil

The photocatalytic performances of three Fe2O3–CeO2 nanocomposites were investigated toward the sulfur removal from a petroleum heavy gas oil (HGO) sample. The three composites were prepared by three different routes namely; auto-combustion, post-precipitation and precipitation. The physio-chemical features and optical properties of the presented composites were determined via proper analytical techniques. Formation of Fe2O3–CeO2 solid solution in all the prepared composites was verified via XRD analysis. These composites were then employed in photo-desulfurization of HGO and their activities were investigated at several operating conditions. The highest photocatalytic desulfurization exploit (91.5%) could be detected for the composite which was prepared via auto-combustion technique, denoted as (Fe20Ce80)ac. This maximum percentage of sulfur removal could be obtained under visible light irradiation at the following optimum operating conditions: 15 g/L (as photocatalyst dose), time of 6 h and 2:1 of H2O2 to oil ratio. The subsequent implementation of a solvent extraction step using N-methyl pyrrolidone was needed to attain the deepest desulfurization of HGO. The efficiencies of the presented composites against the process of sulfur removal were discussed in spot of their textural and optical characteristics as well as the available oxygen vacancies through their lattices structures.

Recent Progress in Metal Oxide-Based Photocatalysts for CO2 Reduction to Solar Fuels: A Review

One of the challenges in developing practical CO₂ photoconversion catalysts is the design of materials with a low cost, high activity and good stability. In this paper, excellent photocatalysts based on TiO₂, WO₃, ZnO, Cu₂O and CeO₂ metal oxide materials, which are cost-effective, long-lasting, and easy to fabricate, are evaluated. The characteristics of the nanohybrid catalysts depend greatly on their architecture and design. Thus, we focus on outstanding materials that offer effective and practical solutions. Strategies to improve CO₂ conversion efficiency are summarized, including heterojunction, ion doping, defects, sensitization and morphology control, which can inspire the future improvement in photochemistry. The capacity of CO₂ adsorption is also pivotal, which varies with the morphological and electronic structures. Forms of 0D, 1D, 2D and 3DOM (zero/one/two-dimensional- and three-dimensional-ordered macroporous, respectively) are involved. Particularly, the several advantages of the 3DOM material make it an excellent candidate material for CO₂ conversion. Hence, we explain its preparation method. Based on the discussion, new insights and prospects for designing high-efficient metallic oxide photocatalysts to reduce CO₂ emissions are presented.

Activation of chloride by oxygen vacancies-enriched TiO2 photoanode for efficient photoelectrochemical treatment of persistent organic pollutants and simultaneous H2 generation

Photoelectrochemical (PEC) activation of chloride ions (Cl^-) to degrade persistent organic pollutants (POPs) is a promising strategy for the treatment of industrial saline organic wastewater. However, the wide application of this technology is greatly restricted due to the general photoanode activation of Cl^- with poor capability, the propensity to produce toxic by-products chlorates, and the narrow pH range. Herein, oxygen vacancies-enriched titanium dioxide (O_v-TiO₂) photoanode is explored to strongly activate Cl^- to drive the deep mineralization of POPs wastewater in a wide pH range (2-12) with simultaneous production of H₂. More importantly, nearly no toxic by-product of chlorates was produced during such PEC-Cl system. The degradation efficiency of 4-CP and H₂ generation rate by O_v-TiO₂ were 99.9% within 60 min and 198.2 μmol h^-1 cm^-2, respectively, which are far superior to that on the TiO₂ (33.1% within 60 min, 27.5 μmol h^-1 cm^-2) working electrode. DFT calculation and capture experiments revealed that O_v-TiO₂ with abundant oxygen vacancies is conducive to the activation of Cl^- to produce more reactive chlorine species, evidenced by its high production of free chlorine (48.7 mg L^-1 vs 7.5 mg L^-1 of TiO₂). The as-designed PEC-Cl system in this work is expected to realize the purification of industrial saline organic wastewater coupling with green energy H₂ evolution.

A novel photocatalytic system coupling metal-free Carbon/g-C3N4 catalyst with persulfate for highly efficient degradation of organic pollutants

A variety of photocatalytic systems have emerged as the effective methods for the degradation of organic pollutants. In this research, a novel photocatalytic system, named CNC-PDS has been proposed, which couples a metal-free carbon/g-C₃N₄ (CNC) photocatalyst with persulfate (PDS), and applied for efficient degradation of paracetamol (PCM) under simulated sunlight. The CNC-PDS system exhibited excellent photocatalytic capability, where the PCM was completely degraded in 40 min under simulated sunlight. The degradation rate of CNC-PDS system was 9.5 times compared with the g-C₃N₄ and PDS coupled systems. The CNC-PDS system can efficiently degrade other representative pollutants in neutral solutions, such as pharmaceuticals, endocrine disrupting compounds (EDCs), azo dyes. The excellent catalytic activity of CNC-PDS system should be ascribed to the two aspects: a) the increased light absorption range led to more photo-induced electron-hole pairs generation compared with the original g-C₃N₄. Meanwhile, the charge separation efficiency of the CNC photocatalyst was drastically enhanced which was proved by the results of PL and EIS analysis. These results represented the carbon/g-C₃N₄ might offer more e^- to promote PDS activation. b) The introduction of CO and the improved specific surface area provided more active sites for PDS activation. In addition, the EPR analysis and quenching experiments indicated that O₂^.-, h⁺ and ¹O₂ were the main active species for PCM in the CNC-PDS system under simulated sunlight, and the contribution order was O₂^.->¹O₂>h⁺. The degradation pathways of PCM in the CNC-PDS system are proposed based on the results of HPLC-MS. The novel CNC-PDS photocatalytic system has provided a viable option for treatment of contaminated water by organic pollutants.

A facile synthesis of highly efficient In2S3 photocatalysts for the removal of cationic dyes with size-dependent photocatalysis

In this study, a 3D thornball-like hierarchical β-In₂S₃, displaying extremely rapid photodegradation of cationic dyes, was synthesized by a facile method. The formation of a uniform thornball-like structure depended on the microwave reaction method and citric acid as the pH regulator. The size of In₂S₃ was easily adjusted by changing the microwave irradiation time from 5 min to 15 min. The morphology, structure, composition, energy level, charge separation, and surface properties of different-sized In₂S₃ were characterized. The results showed that In₂S₃ synthesized in 10 min (In₂S₃-10) displayed optimal interface property for the electron-hole separation, maximum hydrophilia with most surface negative charges for the surface adsorption, contributing to the complete photodegradation of rhodamine B (RhB) in just 25 minutes of visible light illumination. The photodegradation path of RhB was speculated with four possible paths, including the processes of de-ethylation, open-ring of xanthene, and rupture of carbon-carbon bonds up to the decomposition into small molecules. Finally, the reusability of In₂S₃-10 was tested, obtaining nearly 96% photodegradation efficiency after sequential 5 cycles.

Insights into Photoinduced Carrier Dynamics and Overall Water Splitting of Z-Scheme van der Waals Heterostructures with Intrinsic Electric Polarization

Using first-principles calculations in combination with nonadiabatic molecular dynamics (NAMD), we propose novel heterostructures of carbon nitride (C₇N₆) and the Janus GaSnPS monolayer as promising direct Z-scheme photocatalysts for solar-driven overall water splitting. The out-of-plane electric field due to the electric polarization which is dependent on the stacking pattern alters the band alignment and catalytic activity of the heterostructures. The relatively strong interfacial nonadiabatic coupling and long quantum coherence time accelerate the interlayer carrier recombination, enabling a direct Z-scheme photocatalytic mechanism. More importantly, the redox ability of the remanent photogenerated carriers in the Z scheme is strong enough to trigger both the hydrogen evolution reaction (HER) and oxygen reduction reaction (OER) simultaneously without the help of sacrificial agents. Our work reveals a fundamental understanding of ultrafast charge carrier dynamics at vdW heterointerfaces as well as new design prospects for highly efficient direct Z-scheme photocatalysts.

A Novel Hydrothermal CdS with Enhanced Photocatalytic Activity and Photostability for Visible Light Hydrogenation of Azo Bond: Synthesis and Characterization

A good photocatalyst maximizes the absorption of excitation light while reducing the recombination of photogenerated carriers. Among visible light responsive materials, CdS has good carrier transport capacity; however, its photostability is poor and limits its use. Here, the synthesis of a new hydrothermal CdS is reported, and post-synthesis annealing determines crystal properties and spectroscopic characteristics. The introduction of sulfur vacancies as intra band gap states is the key factor for the enhancement of photocatalytic activity. In fact, by spectroscopic and photo-electrochemical experiments, we demonstrate that sulfur vacancies act as an electron sink, favoring the charge transfer process to methyl orange. In addition, the studied hydrothermal CdS is characterized by very high stability, thus enabling a visible-light active photocatalyst that is overall recyclable, stable and more efficient than the commercial benchmark.

Visible-light driven p-n heterojunction formed between α-Bi2O3 and Bi2O2CO3 for efficient photocatalytic degradation of tetracycline

To improve the efficiency of photocatalytic oxidative degradation of antibiotic pollutants, it is essential to develop an efficient and stable photocatalyst. In this study, a polymer-assisted facile synthesis strategy is proposed for the polymorph-controlled α-Bi₂O₃/Bi₂O₂CO₃ heterojunction retained at elevated calcination temperatures. The p-n heterojunction can effectively separate and migrate electron-hole pairs, which improves visible-light-driven photocatalytic degradation from tetracycline (TC). The BO-400@PAN-140 photocatalyst achieves the highest pollutant removal efficiency of 98.21% for photocatalytic tetracycline degradation in 1 h (λ > 420 nm), and the degradation efficiency was maintained above 95% after 5 cycles. The morphology, crystal structure, and chemical state of the composites were analysed by scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Ultraviolet-visible diffuse reflection, transient photocurrent response, and electrochemical impedance spectroscopy were adopted to identify the charge transfer and separation efficiency of photogenerated electron-hole pairs. The EPR results verified h⁺ and ˙OH radicals as the primary active species in the photocatalytic oxidation reactions. This observation was also consistent with the results of radical trapping experiments. In addition, the key intermediate products of the photocatalytic degradation of TC over BO-400@PAN-140 were identified via high-performance liquid chromatography-mass spectrometry, which is compatible with two possible photocatalytic reaction pathways. This work provides instructive guidelines for designing heterojunction photocatalysts via a polymer-assisted semiconductor crystallographic transition pathway for TC degradation into cleaner production.

Current Trends in Nanomaterials for Metal Oxide-Based Conductometric Gas Sensors: Advantages and Limitations-Part 2: Porous 2D Nanomaterials

This article discusses the features of the synthesis and application of porous two-dimensional nanomaterials in developing conductometric gas sensors based on metal oxides. It is concluded that using porous 2D nanomaterials and 3D structures based on them is a promising approach to improving the parameters of gas sensors, such as sensitivity and the rate of response. The limitations that may arise when using 2D structures in gas sensors intended for the sensor market are considered.

Recent Advances in g-C3N4-Based Materials and Their Application in Energy and Environmental Sustainability

Graphitic carbon nitride (g-C₃N₄), with facile synthesis, unique structure, high stability, and low cost, has been the hotspot in the field of photocatalysis. However, the photocatalytic performance of g-C₃N₄ is still unsatisfactory due to insufficient capture of visible light, low surface area, poor electronic conductivity, and fast recombination of photogenerated electron-hole pairs. Thus, different modification strategies have been developed to improve its performance. In this review, the properties and preparation methods of g-C₃N₄ are systematically introduced, and various modification approaches, including morphology control, elemental doping, heterojunction construction, and modification with nanomaterials, are discussed. Moreover, photocatalytic applications in energy and environmental sustainability are summarized, such as hydrogen generation, CO₂ reduction, and degradation of contaminants in recent years. Finally, concluding remarks and perspectives on the challenges, and suggestions for exploiting g-C₃N₄-based photocatalysts are presented. This review will deepen the understanding of the state of the art of g-C₃N₄, including the fabrication, modification, and application in energy and environmental sustainability.

Uranium extraction from seawater: material design, emerging technologies and marine engineering

Uranium extraction from seawater (UES), a potential approach to securing the long-term uranium supply and sustainability of nuclear energy, has experienced significant progress in the past decade. Promising adsorbents with record-high capacities have been developed by diverse innovative synthetic strategies, and scale-up marine field tests have been put forward by several countries. However, significant challenges remain in terms of the adsorbents' properties in complex marine environments, deployment methods, and the economic viability of current UES systems. This review presents an up-to-date overview of the latest advancements in the UES field, highlighting new insights into the mechanistic basis of UES and the methodologies towards the function-oriented development of uranium adsorbents with high adsorption capacity, selectivity, biofouling resistance, and durability. A distinctive emphasis is placed on emerging electrochemical and photochemical strategies that have been employed to develop efficient UES systems. The most recent achievements in marine tests by the major countries are summarized. Challenges and perspectives related to the fundamental, technical, and engineering aspects of UES are discussed. This review is envisaged to inspire innovative ideas and bring technical solutions towards the development of technically and economically viable UES systems.

Controllable Synthesis of BiOCl with Z-Scheme (001)/(110) Facet Homojunction and their Photocatalytic Killing Effect on HePG2 Cells in vitro

In this study, a set of BiOCl with controllable ratios of (001) and (110) facets was prepared by adjusting the content of diethylene glycol (DEG) during the preparation process. The degradation experiment of bisphenol A (BPA) shows that under simulated sunlight, when the ratio of (001) to (110) is 0.61, BiOCl (BOC-2) has the best degradation activity, which can degrade 96.2% BPA within 20 min. After theoretical calculations and experimental characterization, a Z-scheme (001)/(110) facet homojunction is proposed. Then, three typical samples were selected to test the biological toxicity of HepG2 cells and the activity of killing HepG2 cells under ultraviolet light conditions. Studies have found that exposed facets play a more important role in the biotoxicity of BiOCl to cells; with a (001)/(110) ratio of 0.61, BOC-2 exhibits excellent endocytosis and phototoxicity but no obvious dark cytotoxicity, while with a (001)/(110) ratio of 0.15, BiOCl (BOC-4) has poor endocytosis and strong cytotoxicity under dark conditions. Through reactive oxygen species (ROS) and lactate dehydrogenase (LDH) assay detection, the process of photocatalytic killing cells of BOC-2 more looks like an apoptosis mechanism, while BOC-4 mainly causes cell necrosis.

Hierarchical S-Scheme Heterostructure of CdIn2S4@UiO-66-NH2 toward Synchronously Boosting Photocatalytic Removal of Cr(VI) and Tetracycline

Developing highly efficient photocatalysts toward synchronously removing heavy metals and organic pollutants is still a serious challenge. Herein, we depict hierarchical S-scheme heterostructured photocatalysts prepared via in situ anchoring UiO-66-NH₂ nanoparticles onto the CdIn₂S₄ porous microsphere structures assembled with numerous nanosheets. In the mixed system of Cr(VI) and tetracycline (TC), the optimal photocatalyst (CIS@U66N-30) shows remarkable photocatalytic activities toward the synchronous removal of Cr(VI) (97.26%) and TC (close to 100% of) under visible-light irradiation for 60 min, being the best removal rates among those of the reported photocatalysts, and sustains the outstanding stability and reusability. Its reaction rate constants of Cr(VI) reduction and TC degradation are about 2.06 and 1.58 folds that in the single Cr(VI) and TC systems, respectively. The enhanced photocatalytic activities of CIS@U66N-30 mainly result from the following synergism: (1) its hierarchical structure offers abundant active sites, and the S-scheme migration mechanism of charge carriers in the heterostructure accelerates the separation and migration of the useful photoinduced electrons and holes with the high redox capability; (2) Cr(VI) and TC can serve as the electron scavenger for TC oxidation degradation and the hole and ^•OH scavenger for Cr(VI) reduction, respectively, further enhancing the separation and utilization efficiency of photoinduced electrons and holes. Besides, the possible TC degradation pathway and plausible S-scheme photocatalytic mechanism over CIS@U66N-30 for the concurrent elimination of Cr(VI) and TC are proposed.

Advanced nanomaterials for highly efficient CO2 photoreduction and photocatalytic hydrogen evolution

At present, CO₂ photoreduction to value-added chemicals/fuels and photocatalytic hydrogen generation by water splitting are the most promising reactions to fix two main issues simultaneously, rising CO₂ levels and never-lasting energy demand. CO₂, a major contributor to greenhouse gases (GHGs) with about 65% of the total emission, is known to cause adverse effects like global temperature change, ocean acidification, greenhouse effects, etc. The idea of CO₂ capture and its conversion to hydrocarbons can control the further rise of CO₂ levels and help in producing alternative fuels that have several further applications. On the other hand, hydrogen being a zero-emission fuel is considered as a clean and sustainable form of energy that holds great promise for various industrial applications. The current review focuses on the discussion of the recent progress made in designing efficient photocatalytic materials for CO₂ photoreduction and hydrogen evolution reaction (HER). The scope of the current study is limited to the TiO₂ and non-TiO₂ based advanced nanomaterials (i.e. metal chalcogenides, MOFs, carbon nitrides, single-atom catalysts, and low-dimensional nanomaterials). In detail, the influence of important factors that affect the performance of these photocatalysts towards CO₂ photoreduction and HER is reviewed. Special attention is also given in this review to provide a brief account of CO₂ adsorption modes on the catalyst surface and its subsequent reduction pathways/product selectivity. Finally, the review is concluded with additional outlooks regarding upcoming research on promising nanomaterials and reactor design strategies for increasing the efficiency of the photoreactions.

More than One Century of History for Photocatalysis, from Past, Present and Future Perspectives

In this review, we analyzed the history and the past and present trends in photocatalysis research, trying to outline possible scenarios for the future in the medium term. The in-depth analysis of the literature reported here—from a mere bibliometric point of view—allowed us to divide the history of photocatalysis into four different periods characterized by different maturity of the topic and different bibliometric features. The turn of the 20th century saw an explosion in scientific production, which is still continuing now and has reached more than 15,000 papers published each year. Research interest is still growing significantly, and the analysis of different keywords suggests that such growth is substantial and not merely due to “publish or perish” behavior. The analysis of the most-investigated topics in the field of photocatalysis highlighted that, during its history, the focus of the research moved from inorganic oxides to carbon and hybrid materials. Concomitantly, the investigation of the “geography” of photocatalysis allowed us to underline its evolution over the years, with the repositioning of its center of mass from the Atlantic Ocean (USA and Europe) to Asia (China and India). Photocatalysis is active as never before but still awaiting major breakthroughs, which would allow a much broader technological and commercial output. Without such breakthroughs in this decade, the growth in scientific interest could level out or even decrease.

Photocatalytic Hydrogen Production using Porous 3D Graphene-Based Aerogels Supporting Pt/TiO2 Nanoparticles

Composites involving reduced graphene oxide (rGO) aerogels supporting Pt/TiO2 nanoparticles were fabricated using a one-pot supercritical CO2 gelling and drying method, followed by mild reduction under a N2 atmosphere. Electron microscopy images and N2 adsorption/desorption isotherms indicate the formation of 3D monolithic aerogels with a meso/macroporous morphology. A comprehensive evaluation of the synthesized photocatalyst was carried out with a focus on the target application: the photocatalytic production of H2 from methanol in aqueous media. The reaction conditions (water/methanol ratio, catalyst concentration), together with the aerogel composition (Pt/TiO2/rGO ratio) and architecture (size of the aerogel pieces), were the factors that varied in optimizing the process. These experimental parameters influenced the diffusion of the reactants/products inside the aerogel, the permeability of the porous structure, and the light-harvesting properties, all determined in this study towards maximizing H2 production. Using methanol as the sacrificial agent, the measured H2 production rate for the optimized system (18,800 µmolH2h-1gNPs-1) was remarkably higher than the values found in the literature for similar Pt/TiO2/rGO catalysts and reaction media (2000-10,000 µmolH2h-1gNPs-1).

Polymeric Carbon Nitride/Iron Oxide Composites: A Novel Class of Catalysts with Reduced Metal Content for Ammonium Perchlorate Thermal Decomposition

The ever-growing number of space launches triggering an enormous release of metallic dead weight into the atmosphere has become a global concern. Despite technological advancements, the inclusion of environmental concerns in space research has become the need of the hour. Here, we report the impact of iron oxide (Fe₂O₃)-doped polymeric carbon nitride (gCN) composites with varying metal contents (namely, GF1, GF2, and GF3 with iron contents of 0.1, 0.25, and 2 mmol, respectively) as a new class of catalysts for ammonium perchlorate (AP) thermolysis. Morphology studies revealed the dendritic morphology of the synthesized Fe₂O₃, and X-ray photoelectron spectroscopy (XPS) analysis confirmed the effective interaction between Fe₂O₃ and gCN in the composites. Among all of the synthesized composites, GF2 shows superior catalytic competence toward AP decomposition by amalgamating the double-stage decomposition process into a single stage followed by a considerable decrease in the decomposition temperature. The kinetic parameters calculated for the thermal decomposition of AP with and without catalysts using the KAS method substantiated the above results by significantly reducing the activation energy from 173.2 to 151.7 kJ/mol. Later, thermogravimetric and mass-spectrometric (TG-MS) analysis gives a clear idea about the catalytic efficiency of the synthesized catalyst GF2 toward AP decomposition from the accelerated emission of decomposition products NO, NO₂, Cl, HCl, Cl₂, and N₂O in the presence of GF2. In a nutshell, gCN/Fe₂O₃ will open up new horizons in the field of synthesis of new catalytic systems with minimal metal content for composite solid propellants.

Advances in Titanium Carbide (Ti3C2T x ) MXenes and Their Metal-Organic Framework (MOF)-Based Nanotextures for Solar Energy Applications: A Review

Introducing new materials with low cost and superior solar harvesting efficiency requires urgent attention to solve energy and environmental challenges. Titanium carbide (Ti₃C₂T _x ) MXene, a 2D layered material, is a promising solution to solve the issues of existing materials due to their promising conductivity with low cost to function as a cocatalyst/support. On the other hand, metal-organic frameworks (MOFs) are emerging materials due to their high surface area and semiconducting characteristics. Therefore, coupling them would be promising to form composites with higher solar harvesting efficiency. Thus, the main objective of this work to disclose recent development in Ti₃C₂T _x -based MOF nanocomposites for energy conversion applications to produce renewable fuels. MOFs can generate photoinduced electron/hole pairs, followed by transfer of electrons to MXenes through Schottky junctions for photoredox reactions. Currently, the principles, fundamentals, and mechanism of photocatalytic systems with construction of Schottky junctions are critically discussed. Then the basics of MOFs are discussed thoroughly in terms of their physical properties, morphologies, optical properties, and derivatives. The synthesis of Ti₃C₂T _x MXenes and their composites with the formation of surface functionals is systematically illustrated. Next, critical discussions are conducted on design considerations and strategies to engineer the morphology of Ti₃C₂T _x MXenes and MOFs. The interfacial/heterojunction modification strategies of Ti₃C₂T _x MXenes and MOFs are then deeply discussed to understand the roles of both materials. Following that, the applications of MXene-mediated MOF nanotextures in view of CO₂ reduction and water splitting for solar fuel production are critically analyzed. Finally, the challenges and a perspective toward the future research of MXene-based MOF composites are disclosed.

Nanoarchitecture of graphene nanosheets decorated with NiCr layered double hydroxide for sonophotocatalytic degradation of refractory antibiotics

Highly efficient and durable catalysts for wastewater treatment are urgently required to tackle critical environmental issues. In this regard, NiCr LDH (NC), NiCr LDH-GO (NC-GO), and NiCr LDH-rGO (NC-rGO) nanocomposites were synthesized. The results of XRD, EDX, and FTIR analyses not only explored the crystallographic and chemical structures of catalysts but also confirmed the successful synthesis. Further morphological, physical, chemical, and optical characteristics of the catalysts were evaluated more by SEM, HRTEM, BET, DRS, and XPS techniques. The as-synthesized catalysts were used for the efficient mineralization of rifadin under 50 W LED visible light irradiation and the ultrasonic power of 150 W. Amongst, 0.75 g L^-1 of NC-rGO demonstrated high sonophotocatalytic efficiency (88%) in natural pH (pH = 8) of 15 mg L^-1 of rifadin. The introduced system is also powerful for the decontamination of pharmaceutical-containing wastewater as well as other refractory antibiotics. Moreover, the radical trapping experiments demonstrated that the main reactive species involved in the degradation of rifadin are ^•OH, h⁺, and O₂^•-. The possible intermediates were thoroughly investigated using GCMS analysis. Also, NC-rGO demonstrated superior antibacterial activity in comparison with NC, NC-GO samples.

Graphitic carbon nitride (g-C3N4)-based photocatalytic materials for hydrogen evolution

The semiconductors, such as TiO₂, CdS, ZnO, BiVO₄, graphene, produce good applications in photocatalytic water splitting for hydrogen production, and great progress have been made in the synthesis and modification of the materials. As a two-dimensional layered structure material, graphitic carbon nitride (g-C₃N₄), with the unique properties of high thermostability and chemical inertness, excellent semiconductive ability, affords good potential in photocatalytic hydrogen evolution. However, the related low efficiency of g-C₃N₄ with fast recombination rate of photogenerated charge carriers, limited visible-light absorption, and low surface area of prepared bulk g-C₃N₄, has called out the challenge issues to synthesize and modify novel g-C₃N₄-block photocatalyst. In this review, we have summarized several strategies to improve the photocatalytic performance of pristine g-C₃N₄ such as pH, morphology control, doping with metal or non-metal elements, metal deposition, constructing a heterojunction or homojunction, dye-sensitization, and so forth. The performances for photocatalytic hydrogen evolution and possible development of g-C₃N₄ materials are shared with the researchers interested in the relevant fields hereinto.

Optimizing the semiconductor–metal-single-atom interaction for photocatalytic reactivity

Metal single-atom (MSA) catalysts with 100% metal atom utilization and unique electronic properties are attractive cocatalysts for efficient photocatalysis when coupled with semiconductors. Owing to the absence of a metal-metal bond, MSA sites are exclusively coordinated with the semiconductor photocatalyst, featuring a chemical-bond-driven tunable interaction between the semiconductor and the metal single atom. This semiconductor-MSA interaction is a platform that can facilitate the separation/transfer of photogenerated charge carriers and promote the subsequent catalytic reactions. In this Review, we first introduce the fundamental physicochemistry related to the semiconductor-MSA interaction. We highlight the ligand effect on the electronic structures, catalytic properties and functional mechanisms of the MSA cocatalyst through the semiconductor-MSA interaction. Then, we categorize the state-of-the-art experimental and theoretical strategies for the construction of the efficient semiconductor-MSA interaction at the atomic scale for a wide range of photocatalytic reactions. The examples described include photocatalytic water splitting, CO₂ reduction and organic synthesis. We end by outlining strategies on how to further advance the semiconductor-MSA interaction for complex photocatalytic reactions involving multiple elementary steps. We provide atomic and electronic-scale insights into the working mechanisms of the semiconductor-MSA interaction and guidance for the design of high-performance semiconductor-MSA interface photocatalytic systems.

Theoretical study on photocatalytic performance of ZnO/C2N heterostructure towards high efficiency water splitting

The construction of van der Waals heterostructures offers effective boosting of the photocatalytic performance of two-dimensional materials. In this study, which uses the first-principles method, the electronic and absorptive properties of an emerging ZnO/C₂N heterostructure are systematically explored to determine the structure’s photocatalytic potential. The results demonstrate that ZnO and C₂N form a type-II band alignment heterostructure with a reduced band gap, and hence superior absorption in the visible region. Furthermore, the band edge positions of a ZnO/C₂N heterostructure meet the requirements for spontaneous water splitting. The ZnO/C₂N heterostructure is known to possess considerably improved carrier mobility, which is advantageous in the separation and migration of carriers. The Gibbs free energy calculation confirms the high catalytic activity of the ZnO/C₂N heterostructure for water-splitting reactions. All the aforementioned properties, including band gap, band edge positions, and optical absorption, can be directly tuned using biaxial lateral strain. A suitable band gap, decent band edge positions, high catalytic activity, and superior carrier mobility thus identify a ZnO/C₂N heterostructure as a prominent potential photocatalyst for water splitting.

A New Photoelectrocatalyst for Water Oxidation: A Polyoxometalate-Graphitic Carbon Nitride Hybrid Nanomaterial

A new photoelectrocatalyst for the water oxidation process is designed by immobilizing [CoW₁₂O₄₀]^6- (CoW₁₂) heteropolyanions on the surface of covalently modified graphitic carbon nitride nanosheets (g-C₃N₄). For this purpose, g-C₃N₄ is first modified with cysteamine hydrochloride through the well-known thiol-ene click reaction. Afterward, [CoW₁₂O₄₀]^6- heteropolyanions are immobilized on the surface of modified g-C₃N₄ nanosheets with electrostatic interaction with ammonium groups. After confirming the preparation of CoW₁₂/clicked g-C₃N₄ with various physicochemical methods, its photoelectrocatalytic activity is evaluated in the oxygen evolution reaction. The CoW₁₂/clicked g-C₃N₄ exhibits a low onset potential of 1.32 V versus NHE and a low overpotential of 230 mV at 10 mA cm^-2 with a low Tafel slope of 67 mV dec^-1 under visible light illumination. Moreover, the stability of the catalyst is investigated through the chronoamperometric measurements.

Selective Oxidation of Glycerol into Formic Acid by Photogenerated Holes and Superoxide Radicals

Photocatalysis is a promising technology for conversion of the glycerol into formic acid, but photocatalytic oxidation of C-C bonds in glycerol exhibits poor selectivity towards formic acid because the photogenerated radicals (e.g., hydroxyl radicals) further oxidize formic acid to CO₂ . In this work, a synergy of photogenerated holes and superoxide radicals that achieved the selective oxidation of glycerol into formic acid over the TiO₂ catalyst was revealed. The charge separation of pristine TiO₂ was improved with the aid of oxygen, which resulted in efficient hole oxidation of the C-C bonds in glycerol to formic acid. Surface active species were controlled to prevent being converted to hydroxyl radicals on TiO₂ by controlling the oxygen and water contents, which solved the problem of formic acid peroxidation without sophisticated catalyst modifications. Mechanism studies suggested that glyceraldehyde and glycolaldehyde were the intermediates to generate formic acid. This work provides a green and efficient approach to produce formic acid as a liquid hydrogen carrier from bio-based alcohols.

Nanoscale hetero-interfaces for electrocatalytic and photocatalytic water splitting

As green and sustainable methods to produce hydrogen energy, photocatalytic and electrochemical water splitting have been widely studied. In order to find efficient photocatalysts and electrocatalysts, materials with various composition, size, and surface/interface are investigated. In recent years, constructing suitable nanoscale hetero-interfaces can not only overcome the disadvantages of the single-phase material, but also possibly provide new functionalities. In this review, we systematically introduce the fundamental understanding and experimental progress in nanoscale hetero-interface engineering to design and fabricate photocatalytic and electrocatalytic materials for water splitting. The basic principles of photo-/electro-catalytic water splitting and the fundamentals of nanoscale hetero-interfaces are briefly introduced. The intrinsic behaviors of nanoscale hetero-interfaces on electrocatalysts and photocatalysts are summarized, which are the electronic structure modulation, space charge separation, charge/electron/mass transfer, support effect, defect effect, and synergistic effect. By highlighting the main characteristics of hetero-interfaces, the main roles of hetero-interfaces for electrocatalytic and photocatalytic water splitting are discussed, including excellent electronic structure, efficient charge separation, lower reaction energy barriers, faster charge/electron/mass transfer, more active sites, higher conductivity, and higher stability on hetero-interfaces. Following above analysis, the developments of electrocatalysts and photocatalysts with hetero-structures are systematically reviewed.

Tailoring Structure: Current Design Strategies and Emerging Trends to Hierarchical Catalysts

Nature mimicking implies the design of nanostructured materials, which can be assembled into a hierarchical structure, thus outperforming the features of the neat components because of their multiple length scale organization. This approach can be effectively exploited for the design of advanced photocatalysts with superior catalytic activity for energy and environment applications with considerable development in the recent six years. In this context, we propose a review on the state of the art for hierarchical photocatalyst production. Particularly, different synthesis strategies are presented, including template-free structuring, and organic, inorganic, and hybrid templating. Furthermore, emerging approaches based on hybrid and bio-waste templating are also highlighted. Finally, a critical comparison among available methods is carried out based on the envisaged application.

Template-based textural modifications of polymeric graphitic carbon nitrides towards waste water treatment

The composite materials based on graphitic carbon nitrides (g-C₃N₄) are remarkably better semiconductors, but the inherent photocatalytic performance in its generic synthesis form is not up to the mark. Eminence efforts have been made to improve its performance and photocatalytic efficiencies. Recently, extensive investigations have been performed to develop their texturally modified and highly porous structures to get around the big flaws of bulk g-C₃N₄. One significant disadvantage is the increase in the polycondensation while preparation at 550 °C results in g-C₃N₄ materials with restricted specific surface area (SSA) (<10 m²/g) and no textured pores. Textural modification has emerged as an efficient and progressive way to improve optical and electronic characteristics. The final texture and shape of CN are influenced by the precursor's interaction with the template. Researchers are interested in developing CN materials with high SSA and changeable textural properties (pore volume and pore size). Based on the literature review it is concluded that the soft templating approach is relatively simple, and straightforward to induce textural changes in the g-CN type materials. This review focused on improving the textural properties of bulk g-C₃N₄ via templating method, and the major advances in the modified g-C₃N₄ materials for the treatment of wastewater. The procedures and mechanisms of numerous approaches with varying morphologies are thoroughly explained.