Hydrogel-Stiffening and Non-Cell Adhesive Properties of Amphiphilic Peptides with Central Alkylene Chains

Amphiphilic peptides bearing terminal alkyl tails form supramolecular nanofibers that are increasingly used as biomaterials with multiple functionalities. Insertion of alkylene chains in peptides can be designed as another type of amphiphilic peptide, yet the influence of the internal alkylene chains on self-assembly and biological properties remains poorly defined. Unlike the terminal alkyl tails, the internal alkylene chains can affect not only the hydrophobicity but also the flexibility and packing of the peptides. Herein, we demonstrate the supramolecular and biological effects of the central alkylene chain length inserted in a peptide. Insertion of the alkylene chain at the center of the peptide allowed for strengthened β-sheet hydrogen bonds and modulation of the packing order, and consequently the amphiphilic peptide bearing C2 alkylene chain formed a hydrogel with the highest stiffness. Interestingly, the amphiphilic peptides bearing internal alkylene chains longer than C2 showed a diminished cell-adhesive property. This study offers a novel molecular design to tune mechanical and biological properties of peptide materials.

Adaptable hydrogel with reversible linkages for regenerative medicine: Dynamic mechanical microenvironment for cells

Hydrogels are three-dimensional platforms that serve as substitutes for native extracellular matrix. These materials are starting to play important roles in regenerative medicine because of their similarities to native matrix in water content and flexibility. It would be very advantagoues for researchers to be able to regulate cell behavior and fate with specific hydrogels that have tunable mechanical properties as biophysical cues. Recent developments in dynamic chemistry have yielded designs of adaptable hydrogels that mimic dynamic nature of extracellular matrix. The current review provides a comprehensive overview for adaptable hydrogel in regenerative medicine as follows. First, we outline strategies to design adaptable hydrogel network with reversible linkages according to previous findings in supramolecular chemistry and dynamic covalent chemistry. Next, we describe the mechanism of dynamic mechanical microenvironment influence cell behaviors and fate, including how stress relaxation influences on cell behavior and how mechanosignals regulate matrix remodeling. Finally, we highlight techniques such as bioprinting which utilize adaptable hydrogel in regenerative medicine. We conclude by discussing the limitations and challenges for adaptable hydrogel, and we present perspectives for future studies.

Self-assembling peptide-based hydrogels: Fabrication, properties, and applications

The hierarchical formation of self-assembling peptide-based hydrogels (SAPHs) starts from peptide to nanofibers, following with the entanglement into hydrogels with nanofibrous network. Such characteristic structure and extraordinary biocompatibility, and the peptide components endow the SAPHs with diverse applications in biotechnological field. Therefore, the thorough comprehension of SAPHs is significant to broadening their application. In this review, fabrication, properties, and biological applications of the SAPHs are introduced, and the factors influencing the synthesis process as well as the properties of the SAPHs products are also systematically explained. Meanwhile, we conclude the problems to be solved and provide our perspective to the future development of SAPHs in the biotechnology.

Amyloid-Like Aggregation in Diseases and Biomaterials: Osmosis of Structural Information

The discovery that the polypeptide chain has a remarkable and intrinsic propensity to form amyloid-like aggregates endowed with an extraordinary stability is one of the most relevant breakthroughs of the last decades in both protein/peptide chemistry and structural biology. This observation has fundamental implications, as the formation of these assemblies is systematically associated with the insurgence of severe neurodegenerative diseases. Although the ability of proteins to form aggregates rich in cross-β structure has been highlighted by recent studies of structural biology, the determination of the underlying atomic models has required immense efforts and inventiveness. Interestingly, the progressive molecular and structural characterization of these assemblies has opened new perspectives in apparently unrelated fields. Indeed, the self-assembling through the cross-β structure has been exploited to generate innovative biomaterials endowed with promising mechanical and spectroscopic properties. Therefore, this structural motif has become the fil rouge connecting these diversified research areas. In the present review, we report a chronological recapitulation, also performing a survey of the structural content of the Protein Data Bank, of the milestones achieved over the years in the characterization of cross-β assemblies involved in the insurgence of neurodegenerative diseases. A particular emphasis is given to the very recent successful elucidation of amyloid-like aggregates characterized by remarkable molecular and structural complexities. We also review the state of the art of the structural characterization of cross-β based biomaterials by highlighting the benefits of the osmosis of information between these two research areas. Finally, we underline the new promising perspectives that recent successful characterizations of disease-related amyloid-like assemblies can open in the biomaterial field.

Rational Design of Smart Hydrogels for Biomedical Applications

Hydrogels are polymeric three-dimensional network structures with high water content. Due to their superior biocompatibility and low toxicity, hydrogels play a significant role in the biomedical fields. Hydrogels are categorized by the composition from natural polymers to synthetic polymers. To meet the complicated situation in the biomedical applications, suitable host–guest supramolecular interactions are rationally selected. This review will have an introduction of hydrogel classification based on the formulation molecules, and then a discussion over the rational design of the intelligent hydrogel to the environmental stimuli such as temperature, irradiation, pH, and targeted biomolecules. Further, the applications of rationally designed smart hydrogels in the biomedical field will be presented, such as tissue repair, drug delivery, and cancer therapy. Finally, the perspectives and the challenges of smart hydrogels will be outlined.

Design and Development of Hybrid Hydrogels for Biomedical Applications: Recent Trends in Anticancer Drug Delivery and Tissue Engineering

The applications of hydrogels in biomedical field has been since multiple decades. Discoveries in biology and chemistry render this platform endowed with much engineering potentials and growing continuously. Novel approaches in constructing these materials have led to the production of complex hybrid hydrogels systems that can incorporate both natural and synthetic polymers and other functional moieties for mediated cell response, tunable release kinetic profiles, thus they are used and research for diverse biomedical applications. Recent advancement in this field has established promising techniques for the development of biorelevant materials for construction of hybrid hydrogels with potential applications in the delivery of cancer therapeutics, drug discovery, and re-generative medicines. In this review, recent trends in advanced hybrid hydrogels systems incorporating nano/microstructures, their synthesis, and their potential applications in tissue engineering and anticancer drug delivery has been discussed. Examples of some new approaches including click reactions implementation, 3D printing, and photopatterning for the development of these materials has been briefly discussed. In addition, the application of biomolecules and motifs for desired outcomes, and tailoring of their transport and kinetic behavior for achieving desired outcomes in hybrid nanogels has also been reviewed.

Chemically-Induced Cross-Linking of Peptidic Fibrils for Scaffolding Polymeric Particles and Macrophages

EAK16-II (EAK) is a self-assembling peptide (SAP) that forms β-sheets and β-fibrils through ionic-complementary interactions at physiological ionic strengths. The soft materials can be injected in vivo, creating depots of drugs and cells for rendering pharmacological and biological actions. The scope of the applications of EAK is sought to extend to tissues through which the flow of extracellular fluid tends to be limited. In such anatomical locales the rate and extent of the fibrilization are limited insofar as drug delivery and cellular scaffolding would be impeded. A method is generated utilizing a carbodiimide cross-linker by which EAK fibrils are pre-assembled yet remain injectable soft materials. It is hypothesized that the resulting de novo covalent linkages enhance the stacking of the β-sheet bilayers, thereby increasing the lengths of the fibrils and the extent of their cross-linking, as evidenced in Diffuse Reflectance Infrared Fourier Transform (DRIFT) spectroscopy, scanning electron microscopy, and atomic force microscopy analyses. The cross-linked EAK (clEAK) retains polymeric microspheres with an average diameter of 1 µm. Macrophages admixed with clEAK remain viable and do not produce the inflammatory mediator interleukin-1β. These results indicate that clEAK should be investigated further as a platform for delivering particles and cells in vivo.

Smart Thixotropic Hydrogels by Disulfide-Linked Short Peptides for Effective Three-Dimensional Cell Proliferation

Supramolecular assembly of short peptides is a crucial process and has shown numerous potential applications as biomaterials. In the present work, the hydrogelation process of short peptides containing C-terminal "Lys-Cys" (KC) residues have been studied in detail. The N-terminal capping is found to be essential for effective gelation. Out of 12 peptides we studied, two of them could form hydrogels efficiently: Ac-VVKC-NH₂ and Ac-FFKC-NH₂. In both cases, the monomer-to-dimer formation through disulfide linkages by Cys residues controls the aggregation process. Interestingly, the presence of H₂O₂ facilitated the dimerization and thereby reduced the gelation time but could not impart much effect on the mechanical properties of the gels. Detailed rheological study revealed that both hydrogels are thixotropic in nature. Moreover, they are responsive to glutathione (GSH) due to the presence of disulfide linkages. However, the hydrogel of Ac-FFKC-NH₂ is found to be stronger and more effective for biological applications. The thixotropic nature as well as a model drug release study in response to varying GSH concentration indicates the possible use of the hydrogel as an injectable local drug delivery vehicle. The hydrogel of Ac-FFKC-NH₂ is noncytotoxic in nature. Three-dimensional cell proliferation has been found to be more effective than 2D, as it mimics the in vivo situation more closely if not exactly. In the present study, we have shown that both differentiated RAW macrophages and undifferentiated THP-1 monocytes could proliferate significantly within the 3D matrix of the hydrogel, without depicting any apparent cytotoxicity. Thus, the hydrogel of Ac-FFKC-NH₂ has potential for application in localized drug administration and as a supporting biomaterial to study basic phenomena involving cell behavior.

Recent advances in the fabrication, functionalization, and bioapplications of peptide hydrogels

Self-assembled peptide-based nanomaterials have exhibited wide application potential in the fields of materials science, nanodevices, biomedicine, tissue engineering, biosensors, energy storage, environmental science, and others. Due to their porous structure, strong mechanical stability, high biocompatibility, and easy functionalization, three-dimensional self-assembled peptide hydrogels revealed promising potential in bio-related applications. To present the advances in this interesting topic, we present a review on the synthesis and functionalization of peptide hydrogels, as well as their applications in drug delivery, antibacterial materials, cell culture, biomineralization, bone tissue engineering, and biosensors. Specifically, we focus on the fabrication methods of peptide hydrogels through physical, chemical, and biological stimulations. In addition, the functional design of peptide hydrogels by incorporation with polymers, DNA, protein, nanoparticles, and carbon materials is introduced and discussed in detail. It is expected that this work will be helpful not only for the design and synthesis of various peptide-based nanostructures and nanomaterials, but also for the structural and functional tailoring of peptide-based nanomaterials to meet specific demands.

On the Mechanism of Self-Assembly by a Hydrogel-Forming Peptide

Self-assembling peptide-based hydrogels are a class of tunable soft materials that have been shown to be highly useful for a number of biomedical applications. The dynamic formation of the supramolecular fibrils that compose these materials has heretofore remained poorly characterized. A better understanding of this process would provide important insights into the behavior of these systems and could aid in the rational design of new peptide hydrogels. Here, we report the determination of the microscopic steps that underpin the self-assembly of a hydrogel-forming peptide, SgI_37-49. Using theoretical models of linear polymerization to analyze the kinetic self-assembly data, we show that SgI_37-49 fibril formation is driven by fibril-catalyzed secondary nucleation and that all the microscopic processes involved in SgI_37-49 self-assembly display an enzyme-like saturation behavior. Moreover, this analysis allows us to quantify the rates of the underlying processes at different peptide concentrations and to calculate the time evolution of these reaction rates over the time course of self-assembly. We demonstrate here a new mechanistic approach for the study of self-assembling hydrogel-forming peptides, which is complementary to commonly used materials science characterization techniques.

Synthetic peptide hydrogels as 3D scaffolds for tissue engineering

The regeneration of tissues and organs poses an immense challenge due to the extreme complexity in the research work involved. Despite the tissue engineering approach being considered as a promising strategy for more than two decades, a key issue impeding its progress is the lack of ideal scaffold materials. Nature-inspired synthetic peptide hydrogels are inherently biocompatible, and its high resemblance to extracellular matrix makes peptide hydrogels suitable 3D scaffold materials. This review covers the important aspects of peptide hydrogels as 3D scaffolds, including mechanical properties, biodegradability and bioactivity, and the current approaches in creating matrices with optimized features. Many of these scaffolds contain peptide sequences that are widely reported for tissue repair and regeneration and these peptide sequences will also be discussed. Furthermore, 3D biofabrication strategies of synthetic peptide hydrogels and the recent advances of peptide hydrogels in tissue engineering will also be described to reflect the current trend in the field. In the final section, we will present the future outlook in the design and development of peptide-based hydrogels for translational tissue engineering applications.

Improving and fine-tuning the properties of peptide-based hydrogels via incorporation of peptide nucleic acids

Peptide self-assemblies have attracted intense research interest over the last few decades thanks to their implications in key biological processes (e.g., amyloid formation) and their use in biotechnological and (bio)material fields. In particular, peptide-based hydrogels have been highly considered as high potential supramolecular materials in the biomedical domain and open new horizons in terms of applications. To further understand their self-assembly mechanisms and to optimize their properties, several strategies have been proposed with the modification of the constituting amino acid chains via, per se, the introduction of d-amino acids, halogenated amino acids, pseudopeptide bonds, or other chemical moieties. In this context, we report herein on the incorporation of DNA-nucleobases into their peptide nucleic acid (PNA) forms to develop a new series of hybrid nucleopeptides. Thus, depending on the nature of the nucleobase (i.e., thymine, cytosine, adenine or guanine), the physicochemical and mechanical properties of the resulting hydrogels can be significantly improved and fine-tuned with, for instance, drastic enhancements of both the gel stiffness (up to 70-fold) and the gel resistance to external stress (up to 40-fold), and the generation of both thermo-reversible and uncommon red-edge excitation shift (REES) properties. To decipher the actual role of each PNA moiety in the self-assembly processes, the induced modifications from the molecular to the macroscopic scales are studied thanks to the multiscale approach based on a large panel of analytical techniques (i.e., rheology, NMR relaxometry, TEM, thioflavin T assays, FTIR, CD, fluorescence, NMR chemical shift index). Thus, such a strategy provides new opportunities to adapt and fit hydrogel properties to the intended ones and pushes back the limits of supramolecular materials.

Toward Artificial Mussel-Glue Proteins: Differentiating Sequence Modules for Adhesion and Switchable Cohesion

Artificial mussel-glue proteins with pH-triggered cohesion control were synthesized by extending the tyrosinase activated polymerization of peptides to sequences with specific modules for cohesion control. The high propensity of these sequence sections to adopt β-sheets is suppressed by switch defects. This allows enzymatic activation and polymerization to proceed undisturbed. The β-sheet formation is regained after polymerization by changing the pH from 5.5 to 6.8, thereby triggering O→N acyl transfer rearrangements that activate the cohesion mechanism. The resulting artificial mussel glue proteins exhibit rapid adsorption on alumina surfaces. The coatings resist harsh hypersaline conditions, and reach remarkable adhesive energies of 2.64 mJ m-2 on silica at pH 6.8. In in situ switch experiments, the minor pH change increases the adhesive properties of a coating by 300 % and nanoindentation confirms the cohesion mechanism to improve bulk stiffness by around 200 %.

Nanoribbon self-assembly and hydrogel formation from an NOctanoyl octapeptide derived from the antiparallel β-Interface of a protein homotetramer

The effect of installing different lipid chains (C₆, C₈, C₁₀, and C₁₆) on the N-terminus of an octapeptide derived from the antiparallel β-interface of the diaminopimelate decarboxylase protein homotetramer has been investigated. Notably, the C₈ peptide conjugate assembled into wide twisted nanoribbons and formed hydrogels, which to the best of our knowledge constitutes the first example of a peptide containing an eight carbon alkyl chain that demonstrates these properties, a space typically occupied by peptide amphiphiles with long lipid chains. Furthermore, this self-assembling lipopeptide exhibited pH and temperature stability with shear thinning properties suitable for biomedical applications. Importantly, in this work the application of the polystyrene-based sorbent Diaion™ HP20SS for the simple large-scale purification of self-assembling peptides is presented as an alternative to the use of time-consuming and labor-intensive reverse-phase high-performance liquid chromatography. STATEMENT OF SIGNIFICANCE: Peptides that can self-assemble into defined nanostructures are highly attractive for many biomedical applications given their unique physical and chemical properties. It is recognized that self-assembling peptides derived from naturally occurring proteins offer an unlimited source of functionalities and structures, which are hard to uncover with designed sequences. In this study, we have investigated the effect of installing different lipids chains on the N-terminus of an octapeptide derived from the antiparallel β-interface of the diaminopimelate decarboxylase protein homo tetramer. We also reported the use of polymeric Diaion^Ⓡ HP20SS beads as an alternative solid support to purify self-assembling peptides.

Multi-component peptide hydrogels - a systematic study incorporating biomolecules for the exploration of diverse, tuneable biomaterials

Peptide-based supramolecular gels can be designed to be functional "smart" materials that have applications in drug delivery, tissue engineering, and supramolecular chemistry. Although many multi-component gel systems have been designed and reported, many of these applications still rely solely on single-component gel systems which limits the functionalities of the materials. Multi-component self-assembly leads to the formation of highly ordered and complex architectures while offering the possibility to generate hydrogels with interesting properties including functional complexity and diverse morphologies. Being able to incorporate various classes of biomolecules can allow for tailoring the materials' functionalities to specific application needs. Here, a novel peptide amphiphile, myristyl-Phe-Phe (C14-FF), was synthesized and explored for hydrogel formation. The hydrogel possesses a nanofiber matrix morphology, composed of β-sheet aggregates, a record-low gelation concentration for this class of compounds, and a unique solvent-dependent helical switch. The C14-FF hydrogel was then explored with various classes of biomolecules (carbohydrates, vitamins, proteins, building blocks of HA) to generate a multi-component library of gels that have potential to represent the complex natural extracellular matrix. Selected multi-component gels exhibit an excellent compatibility with mesenchymal stem cells showing high cell viability percentages, which holds great promise for applications in regenerative therapy.

Directed self-assembly of peptide-diketopyrrolopyrrole conjugates - a platform for bio-organic thin film preparation

Increased water solubility and long-range intermolecular ordering have been introduced into the fluorescent organic molecule thiophene-diketopyrrolopyrrole (TDPP) via its conjugation to the octapeptide HEFISTAH, which is derived from the protein-protein β-interface of the homo-tetramer protein diaminopimelate decarboxylase. The octapeptide, and its TDPP mono- and cross-linked conjugates were synthesised using 9-fluorenylmethoxycarbonyl (Fmoc) based solid-phase peptide synthesis (SPPS). Unlike the unmodified peptide, the resulting mono-linked and cross-linked peptides showed a fibrous morphology and formed hydrogels at 4 wt% in water at neutral pH, but failed to assemble at pH 2 and pH 9. Further peptide characterization showed that the TDPP organic core enhances peptide self-assembly and that both peptides assembled into fibers with a parallel β-sheet structure. Furthermore, UV-vis spectroscopic analysis suggests that the TDPP molecules form H-type aggregates where the chromophores are likely to be co-facially packed, but rotationally and/or laterally offset from one another. This intermolecular coupling indicates that π-π stacking interactions are highly likely - a favourable sign for charge transport. The enhanced aqueous solubility and self-assembling properties of the TDPP-peptide conjugates allowed the successful preparation of thin films. Atomic force microscopy, X-ray diffraction and UV-vis spectroscopic analysis of these thin films revealed that the hybrid materials retained a fibrous morphology, β-sheet structures and strong intermolecular coupling between neighbouring TDPP molecules. These results open an exciting avenue for bio-organic materials development, through structural and electronic tuning of the TDPP core.

Effect of varied hair protein fractions on the gel properties of keratin/chitosan hydrogels for the use in tissue engineering

Keratin/chitosan composite is a readily available source for a hybrid hydrogel in tissue engineering. While human hair keratins could provide biological functions, chitosan could further enhance the mechanical strength of the hybrid hydrogels. However, hair keratin is a group of natural proteins, and the uncontrolled hair protein contents in a hydrogel may lead to the batch-to-batch inconsistent gel properties. The purpose of this study was to investigate the role of hair protein composition, including the keratin-associated proteins (KAPs, 6-30 kDa) and keratin intermediate filaments (KIFs, 45-60 kDa) on gel characteristics of the keratin/chitosan hydrogel. The various compressive and tensile modulus of the gel was observed based on the selection of different protein fractions as the significant gel components. These results thus suggest a straightforward method of preparing hair keratin/chitosan hydrogel with much more controllable gel properties by merely modulating the KAPs/KIFs ratios in a gel.

Sequence-Dependent Bioactivity and Self-Assembling Properties of RGD-Containing Amphiphilic Peptides as Extracellular Scaffolds

Cell adhesion is a fundamental biological process involved in a wide range of cellular and biological activity. Integrin-ligand binding is largely responsible for cell adhesion with an extracellular matrix, and the RGD sequence is an epitope in ligand proteins such as fibronectin. The extracellular matrix consists of fibrous proteins with embedded ligands for integrins. Such a biological architecture has been reconstructed for biochemical, pharmaceutical, and biomaterial studies using artificial supramolecular systems to reproduce cell adhesion functionality, and fiber-forming self-assembling peptides containing RGD are one such promising material for this purpose. In this study, using RADA16 as a model fiber-forming peptide, a series of RGD-containing variants have been synthesized by the replacement of one alanine with glycine at different positions, in which all the variants consist of identical amino acid components. The position of the RGD unit influenced the supramolecular self-assembly of the amphiphilic peptide to inhibit β-sheet formation (A6G) or twist the molecular alignment in β-sheet-type assemblies (A10G and A14G). Furthermore, A10G and A14G formed assembled nanofibers, which afforded hydrogels with higher viscoelasticities than other RGD-containing variants. In contrast to A10G and A14G, which exhibit substantial cell adhesion functionality, the cell adhesion efficiencies of the other RGD-containing variants were significantly reduced. This suggests that the higher order structure could strongly influence the cell adhesion functionality of RGD-containing supramolecular nanofibers.

Ultrashort Peptide Self-Assembly: Front-Runners to Transport Drug and Gene Cargos

The translational therapies to promote interaction between cell and signal come with stringent eligibility criteria. The chemically defined, hierarchically organized, and simpler yet blessed with robust intermolecular association, the peptides, are privileged to make the cut-off for sensing the cell-signal for biologics delivery and tissue engineering. The signature service and insoluble network formation of the peptide self-assemblies as hydrogels have drawn a spell of research activity among the scientists all around the globe in the past decades. The therapeutic peptide market players are anticipating promising growth opportunities due to the ample technological advancements in this field. The presence of the other organic moieties, enzyme substrates and well-established protecting groups like Fmoc and Boc etc., bring the best of both worlds. Since the large sequences of peptides severely limit the purification and their isolation, this article reviews the account of last 5 years' efforts on novel approaches for formulation and development of single molecule amino acids, ultra-short peptide self-assemblies (di- and tri- peptides only) and their derivatives as drug/gene carriers and tissue-engineering systems.

Comparative study of α-helical and β-sheet self-assembled peptide nanofiber vaccine platforms: influence of integrated T-cell epitopes

Several different self-assembling peptide systems that form nanofibers have been investigated as vaccine platforms, but design principles for adjusting the character of the immune responses they raise have yet to be well articulated. Here we compared the immune responses raised by two structurally dissimilar peptide nanofibers, one a β-sheet fibrillar system (Q11), and one an α-helical nanofiber system (Coil29), hypothesizing that integrated T-cell epitopes within the latter would promote T follicular helper (Tfh) cell engagement and lead to improved antibody titers and quality. Despite significantly different internal structures, nanofibers of the two peptides exhibited surprisingly similar nanoscale morphologies, and both were capable of raising strong antibody responses to conjugated peptide epitopes in mice without adjuvant. Both were minimally inflammatory, but as hypothesized Coil29 nanofibers elicited antibody responses with higher titers and avidities against a conjugated model epitope (OVA_323-339) and a candidate peptide epitope for vaccination against S. aureus. Subsequent investigation indicated that Coil29 nanofibers possessed internal CD4+ T cell epitopes: whereas Q11 nanofibers required co-assembly of additional CD4+ T cell epitopes to be immunogenic, Coil29 nanofibers did not. Coil29 nanofibers also raised stronger germinal center B cell responses and follicular helper T cell (Tfh) responses relative to Q11 nanofibers, likely facilitating the improvement of the antibody response. These findings illustrate design strategies for improving humoral responses raised by self-assembled peptide nanofibers.

Spider-silk inspired polymeric networks by harnessing the mechanical potential of β-sheets through network guided assembly

The high toughness of natural spider-silk is attributed to their unique β-sheet secondary structures. However, the preparation of mechanically strong β-sheet rich materials remains a significant challenge due to challenges involved in processing the polymers/proteins, and managing the assembly of the hydrophobic residues. Inspired by spider-silk, our approach effectively utilizes the superior mechanical toughness and stability afforded by localised β-sheet domains within an amorphous network. Using a grafting-from polymerisation approach within an amorphous hydrophilic network allows for spatially controlled growth of poly(valine) and poly(valine-r-glycine) as β-sheet forming polypeptides via N-carboxyanhydride ring opening polymerisation. The resulting continuous β-sheet nanocrystal network exhibits improved compressive strength and stiffness over the initial network lacking β-sheets of up to 30 MPa (300 times greater than the initial network) and 6 MPa (100 times greater than the initial network) respectively. The network demonstrates improved resistance to strong acid, base and protein denaturants over 28 days.

It is known the β-sheet structures in silk-inspired materials generate increased mechanical properties. Here, the authors report on a method of creating silk-inspired materials using in situ formation of β-sheets in an amorphous polymer to replicate the structure of silk and increase the mechanical properties.

New Developments in Medical Applications of Hybrid Hydrogels Containing Natural Polymers

New trends in biomedical applications of the hybrid polymeric hydrogels, obtained by combining natural polymers with synthetic ones, have been reviewed. Homopolysaccharides, heteropolysaccharides, as well as polypeptides, proteins and nucleic acids, are presented from the point of view of their ability to form hydrogels with synthetic polymers, the preparation procedures for polymeric organic hybrid hydrogels, general physico-chemical properties and main biomedical applications (i.e., tissue engineering, wound dressing, drug delivery, etc.).

Multifunctional Polymer-Free Mineral Plastic Adhesives Formed by Multiple Noncovalent Bonds

Supramolecular adhesives have attracted a great deal of attention in recent years, resulting in their development for different applications. However, creating supramolecular adhesives with reversible and reusable properties is still a challenge. Here, a synthesis route to obtain supramolecular adhesives is presented in which no polymeric compounds are involved in the preparation. The adhesive is formed by intermolecular coulomb forces between amorphous magnesium carbonate nanoparticles and the low-molecular-weight drug ibuprofen, which results in an amorphous composite material that is transparent, shapeable, stretchable, and self-healing, making it reusable. It is demonstrated that this hybrid material provides a simple means of gluing a wide variety of materials, including metals, glass, paper, and plastics, and that is reversible and possesses reusability. The material disrupts the traditional concept of polymer-based adhesives and may be used as a sustainable mineral plastic in applications such as 3D printing.

Beyond Fmoc: a review of aromatic peptide capping groups

Self-assembling short peptides have attracted widespread interest due to their tuneable, biocompatible nature and have potential applications in energy materials, tissue engineering, sensing and drug delivery. The hierarchical self-assembly of these peptides is highly dependent on the selection of not only amino acid sequence, but also the capping group which is often employed at the N-terminus of the peptide to drive self-assembly. Although the Fmoc (9H-fluorenylmethyloxycarbonyl) group is commonly used due to its utility in solid phase peptide synthesis, many other aromatic capping groups have been reported which yield functional, responsive materials. This review explores recent developments in the utilisation of functional, aromatic capping groups beyond the Fmoc group for the creation of redox-responsive, fluorescent and drug delivering hydrogel scaffolds.

A guide to supramolecular polymerizations

Supramolecular polymers are non-covalent assemblies of unimeric building blocks connected by secondary interactions and hold great promises due to their dynamic nature.

Design, characterization and evaluation of β-hairpin peptide hydrogels as a support for osteoblast cell growth and bovine lactoferrin delivery

The use of peptide hydrogels is of growing interest in bone regeneration. Self-assembling peptides form hydrogels and can be used as injectable drug delivery matrices. Injected into the defect site, they can gel in situ, and release factors that aid bone growth. We report on the design, synthesis and characterization of three β-hairpin peptide hydrogels, and on their osteoblast cytocompatibility as well as delivery of the lactoferrin glycoprotein, a bone anabolic factor. Osteoblasts cultured in hydrogels of the peptide with sequence NH₂-Leu-His-Leu-His-Leu-Lys-Leu-Lys-Val-dPro-Pro-Thr-Lys-Leu-Lys-Leu-His-Leu-His-Leu-Arg-Gly-Asp-Ser-CONH₂ (H4LMAX-RGDS) increased the osteoblast cell number and the cells appeared healthy after seven days. Furthermore, we showed that H4LMAX-RGDS was capable of releasing up to 60% of lactoferrin (pre-encapsulated in the gel) over five days while retaining the rest of the glycoprotein. Thus, H4LMAX-RGDS hydrogels are cytocompatible with primary osteoblasts and capable of delivering bio-active lactoferrin that increases osteoblast cell number.

Self-assembling peptide H4LMAX-RGDS hydrogels, designed to enhance bone regeneration, are cytocompatible and capable of delivering the bone anabolic factor lactoferrin to increase osteoblast cell number.

Fibril Charge Affects α-Synuclein Hydrogel Rheological Properties

In this paper, we have investigated the interactions between α-synuclein fibrils at different pH values and how this relates to hydrogel formation and gel properties. Using a combination of rheology, small-angle X-ray scattering, Raman spectroscopy, and cryo-transmission electron microscopy (cryo-TEM) experiments, we have been able to investigate the relationship between protein net charge, fibril-fibril interactions, and hydrogel properties, and have explored the potential for α-synuclein to form hydrogels at various conditions. We have found that α-synuclein can form hydrogels at lower concentrations (50-300 μM) and over a wider pH range (6.0-7.5) than previously reported. Over this pH range and at 300 μM, the fibril network is electrostatically stabilized. Decreasing the pH to 5.5 results in the precipitation of fibrils. A maximum in gel stiffness was observed at pH 6.5 (∼1300 Pa), which indicates that significant attractive interactions operate at this pH and cause an increase in the density of hydrophobic contacts between the otherwise negatively charged fibrils. We conclude that fibril-fibril interactions under these conditions involve both long-range electrostatic repulsion and a short-range hydrophobic attractive (sticky) component. These results may provide a basis for potential applications and add to the understanding of amyloids.

Melanin production by tyrosinase activity on a tyrosine-rich peptide fragment and pH-dependent self-assembly of its lipidated analogue

We investigate the self-assembly of a palmitoylated (C16-chain at the N terminus) peptide fragment in comparison to the unlipidated peptide EELNRYY, a fragment of the gut hormone peptide PYY3-36. The lipopeptide C16-EELNRYY shows remarkable pH-dependent self-assembly above measured critical aggregation concentrations, forming fibrils at pH 7, but micelles at pH 10. The parent peptide does not show self-assembly behaviour. The lipopeptide forms hydrogels at sufficiently high concentration at pH 7, the dynamic mechanical properties of which were measured. We also show that the tyrosine functionality at the C terminus of EELNRYY can be used to enzymatically produce the pigment melanin. The enzyme tyrosinase oxidises tyrosine into 3,4-dihydroxyphenylalanine (DOPA), DOPA-quinone and further products, eventually forming eumelanin. This is a mechanism of photo-protection in the skin, for this reason controlling tyrosinase activity is a major target for skin care applications and EELNRYY has potential to be developed for such uses.

Self-Assembly, Tunable Hydrogel Properties, and Selective Anti-Cancer Activity of a Carnosine-Derived Lipidated Peptide

A novel lipopeptide C₁₆KTTβAH was designed that incorporates the KTT tripeptide sequence from "Matrixyl" lipopeptides along with the bioactive βAH (β-alanine-histidine) carnosine dipeptide motif, attached to a C₁₆ hexadecyl lipid chain. We show that this peptide amphiphile self-assembles above a critical aggregation concentration into β-sheet nanotape structures in water, phosphate-buffered saline (PBS), and cell culture media. Nanotape bundle structures were imaged in PBS, the bundling resulting from nanotape associations because of charge screening in the buffer. In addition, hydrogelation was observed and the gel modulus was measured in different aqueous media conditions, revealing tunable hydrogel modulus depending on the concentration and nature of the aqueous phase. Stiff hydrogels were observed by direct dissolution in PBS, and it was also possible to prepare hydrogels with unprecedented high modulus from low-concentration solutions by injection of dilute aqueous solutions into PBS. These hydrogels have exceptional stiffness compared to previously reported β-sheet peptide-based materials. In addition, macroscopic soft threads which contain aligned nematic structures can be drawn from concentrated aqueous solutions of the lipopeptides. The anti-cancer activity of the lipopeptide was assessed using two model breast cancer cell lines compared to two fibroblast cell line controls. These studies revealed selective concentration-dependent cytotoxicity against MCF-7 cancer cells in the mM concentration range. It was shown that this occurs below the onset of lipopeptide aggregation (i.e., below the critical aggregation concentration), indicating that the cytotoxicity is not related to self-assembly but is an intrinsic property of C₁₆KTTβAH. Finally, hydrogels of this lipopeptide demonstrated slow uptake and release of the Congo red dye, a model diagnostic compound.

Injectable peptide hydrogel as intraperitoneal triptolide depot for the treatment of orthotopic hepatocellular carcinoma

Chemotherapy is among the limited choices approved for the treatment of hepatocellular carcinoma (HCC) at intermediate and advanced stages. Preferential and prolonged drug exposure in diseased sites is required to maximize the therapeutic index of the drug. Here, we report an injectable supramolecular peptide hydrogel as an intraperitoneal depot for localized and sustained release of triptolide for the treatment of orthotopic HCC. We chose peptide amphiphile C₁₆-GNNQQNYKD-OH-based nanofibers as gelators and carriers for triptolide. Sustained triptolide release from the hydrogel was achieved over 14 days in vitro, with higher accumulation in and cytotoxicity against human HCC Bel-7402 in comparison with L-02 fetal hepatocytes. After intraperitoneal injection, the hydrogel showed prolonged retention over 13 days and preferential accumulation in the liver, realizing HCC growth inhibition by 99.7 ± 0.1% and animal median survival extension from 19 to 43 days, without causing noticeable pathological changes in the major organs. These results demonstrate that injectable peptide hydrogel can be a potential carrier for localized chemotherapy of HCC.

Stimuli-responsive membrane activity of cyclic-peptide-polymer conjugates

Cyclic peptide nanotubes (CPNT) consisting of an even number of amino acids with an alternating chirality are highly interesting materials in a biomedical context due to their ability to insert themselves into cellular membranes. However, unwanted unspecific interactions between CPNT and non-targeted cell membranes are a major drawback. To solve this issue we have synthetized a series of CPNT-polymer conjugates with a cleavable covalent connection between macromolecule and peptide. As a result, the polymers form a stabilizing and shielding shell around the nanotube that can be cleaved on demand to generate membrane active CPNT from non-active conjugates. This approach enables us to control the stacking and lateral aggregation of these materials, thus leading to stimuli responsive membrane activity. Moreover, upon activation, the systems can be adjusted to form nanotubes with an increased length instead of aggregates. We were able to study the dynamics of these systems in detail and prove the concept of stimuli responsive membrane interaction using CPNT-polymer conjugates to permeabilize liposomes as well as mammalian cell membranes.

Is a cross-β-sheet structure of low molecular weight peptides necessary for the formation of fibrils and peptide hydrogels?

Short peptides have emerged as versatile building blocks for supramolecular structures and hydrogels. In particular, the presence of aromatic amino acid residues and/or aromatic end groups is generally considered to be a prerequisite for initiating aggregation of short peptides into nanotubes or cross β-sheet type fibrils. However, the cationic GAG tripeptide surprisingly violates these rules. Specifically, in water/ethanol mixtures, GAG peptides aggregate into very long crystalline fibrils at temperatures below 35 °C where they eventually form a spanning network structure and, thus, a hydrogel. Two gel phases are formed in this network, and they differ substantially in chirality and thickness of the underlying fibrils, their rheological parameters, and the kinetics of oligomerization, fibrilization, and gel formation. The spectroscopic data strongly suggests that the observed fibrils do not exhibit canonical cross β-sheet structures and are indicative of a yet unknown secondary conformation. To complement our unusual experimental observations in this perspective article, we performed large-scale DFT calculations to probe the geometry and spectroscopic properties of these GAG oligomers. Most importantly, our experimental and computational results yield rather unconventional structures that are not reminiscent of classical cross-β-sheet structures, and we give two extremely likely candidates for oligomer structures that are consistent with experimental amide I' profiles in IR and vibrational circular dichroism (VCD) spectra of the two gel phases.

Peptide-Stabilized Emulsions and Gels from an Arginine-Rich Surfactant-like Peptide with Antimicrobial Activity

The preparation of hydrogels and stable emulsions is important in the formulation of many functional nanostructured soft materials. We investigate the multifunctional self-assembly and bioactivity properties of a novel surfactant-like peptide (SLP) that shows antimicrobial activity, is able to form hydrogels without pH adjustment, and is able to stabilize oil-in-water emulsions. Furthermore, we demonstrate on-demand de-emulsification in response to the protease enzyme elastase. We show that SLP (Ala)9-Arg (A9R) forms β-sheet fibers above a critical aggregation concentration and that water-in-oil emulsions are stabilized by a coating of β-sheet fibers around the emulsion droplets. Furthermore, we demonstrate enzyme-responsive de-emulsification, which has potential in the development of responsive release systems. The peptide shows selective antimicrobial activity against Gram-negative pathogens including Pseudomonas aeruginosa, which causes serious infections. Our results highlight the utility of SLPs in the stabilization of oil/water emulsions and the potential for these to be used to formulate antimicrobial peptide emulsions which are additionally responsive to protease. The peptide A9R has pronounced antibacterial activity against clinically challenging pathogens, and its ability to form β-sheet fibers plays a key role in its diverse structural properties, ranging from hydrogel formation to emulsion stabilization.

Super metal hydrogels constructed from a simple tripodal gelator and rare earth metal ions and its application in highly selective and ultrasensitive detection of histidine

A series of stable super metal hydrogels (TP-Ms, M = Tb3+, Eu3+, La3+ and Ce3+) with a low critical gelation concentration (2.28 × 10-3 M, 0.1%) was successfully constructed by forming hierarchical assemblies of a tripodal gelator (TP) with rare earth metal ions (Tb3+, Eu3+, La3+ and Ce3+). Interestingly, the super metal hydrogels TP-Eu and TP-La show a specific and ultrasensitive response to histidine (His). The addition of a series of amino acids into the metal hydrogels TP-Eu and TP-La showed that only His could induce distinct fluorescent enhancement for TP-Eu and TP-La, while other amino acids did not significantly interfere with the His sensing process. The LODs of super metal-hydrogel TP-Eu and TP-La for His are (1.83-1.94) × 10-9 and (1.83-1.85) × 10-9 M, respectively. In addition, constructing super supramolecular metal hydrogels by hierarchical assemblies of an easily synthesized tripodal gelator and rare earth metal ions is a novel and efficient approach to the design and development of multi-functional super supramolecular metal hydrogel-based materials.

The role of the side chain in the conformational and self-assembly patterns of C2-symmetric Val and Phe pseudopeptidic derivatives

Side chain as the main conformational and self-assembly structural factor for C₂-pseudopeptides.

Supramolecular phenoxy-alkyl maleate-based hydrogels and their enzyme/pH-responsive curcumin release

Low molecular-weight hydrogelators as stimuli-responsive drug carrier agents in the pharmaceutical field.

On the analysis of microrheological responses of self-assembling RADA16-I peptide hydrogel

This work aims to obtain a hydrogel based on self-assembling RADA16-I with proper rheological properties for hemostasis application. Response surface methodology (RSM) was performed to predict the gelation and stiffness of the hydrogel in different concentrations of peptide and NaCl in water and blood serum milieus. Particle tracking microrheology technique was used to evaluate Brownian motion of polystyrene particles in the peptide solutions to obtain their trajectories and measure the viscoelastic properties (G'', G″, and tan δ). Formation of gel was influenced by the concentrations of peptide and salt and their interactions. Optimum response for maximizing elastic modulus was obtained in the presence of blood serum in comparison with water. Negative effect of excess amount of NaCl was predicted by RSM model and confirmed by animal study. Circular dichroism (CD) analysis showed formation of β-sheet secondary structure in water. On the other hand, in the presence of blood serum, tertiary structure was formed. Dimensional characterization of peptide fibers was performed by means of AFM. Peptide self-assembly in blood serum (pH around 7) which contains different ions, led to enhancing bonds between fibers, caused increasing the fiber diameter and length by 20 and 10 times, respectively. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 330-338, 2019.

Peptide Nanomaterials Designed from Natural Supramolecular Systems

Natural supramolecular assemblies exhibit unique structural and functional properties that have been optimized over the course of evolution. Inspired by these natural systems, various bio-nanomaterials have been developed using peptides, proteins, and nucleic acids as components. Peptides are attractive building blocks because they enable the important domains of natural protein assemblies to be isolated and optimized while retaining the original structures and functions. Furthermore, the peptide subunits can be conjugated with exogenous molecules such as peptides, proteins, nucleic acids, and metal nanoparticles to generate advanced functions. In this personal account, we summarize recent progress in the construction of peptide-based nanomaterial designed from natural supramolecular systems, including (1) artificial viral capsids, (2) self-assembled nanofibers, and (3) protein-binding motifs. The peptides inspired by nature should provide new design principles for bio-nanomaterials.

Secondary nucleation in amyloid formation

Nucleation of new peptide and protein aggregates on the surfaces of amyloid fibrils of the same peptide or protein has emerged in the past two decades as a major pathway for both the generation of molecular species responsible for cellular toxicity and for the autocatalytic proliferation of peptide and protein aggregates. A key question in current research is the molecular mechanism and driving forces governing such processes, known as secondary nucleation. In this context, the analogies with other self-assembling systems for which monomer-dependent secondary nucleation has been studied for more than a century provide a valuable source of inspiration. Here, we present a short overview of this background and then review recent results regarding secondary nucleation of amyloid-forming peptides and proteins, focusing in particular on the amyloid β peptide (Aβ) from Alzheimer's disease, with some examples regarding α-synuclein from Parkinson's disease. Monomer-dependent secondary nucleation of Aβ was discovered using a combination of kinetic experiments, global analysis, seeding experiments and selective isotope-enrichment, which pinpoint the monomer as the origin of new aggregates in a fibril-catalyzed reaction. Insights into driving forces are gained from variations of solution conditions, temperature and peptide sequence. Selective inhibition of secondary nucleation is explored as an effective means to limit oligomer production and toxicity. We also review experiments aimed at finding interaction partners of oligomers generated by secondary nucleation in an ongoing aggregation process. At the end of this feature article we bring forward outstanding questions and testable mechanistic hypotheses regarding monomer-dependent secondary nucleation in amyloid formation.

Supramolecular Peptide/Polymer Hybrid Hydrogels for Biomedical Applications

Peptides and polymers are the "elite" building blocks in hydrogel fabrication where the typical approach consists of coupling specific peptide sequences (cell adhesive and/or enzymatically cleavable) to polymer chains aiming to obtain controlled cell responses (adhesion, migration, differentiation). However, the use of polymers and peptides as structural components for fabricating supramolecular hydrogels is less well established. Here, the literature on the design of peptide/polymer systems for self-assembly into hybrid hydrogels, as either peptide-polymer conjugates or combining both components individually, is reviewed. The properties (stiffness, mesh structure, responsiveness, and biocompatibility) of the hydrogels are then discussed from the viewpoint of their potential biomedical applications.

Tough Photocrosslinked Silk Fibroin/Graphene Oxide Nanocomposite Hydrogels

The development of protein-based hydrogels for tissue engineering applications is often limited by their mechanical properties. Herein, we present the facile fabrication of tough regenerated silk fibroin (RSF)/graphene oxide (GO) nanocomposite hydrogels by a photochemical cross-linking method. The RSF/GO composite hydrogels demonstrated soft and adhesive properties during initial stages of photocrosslinking (<2 min), which is not observed for the pristine RSF hydrogel, and rendered a tough and nonadhesive hydrogel upon complete cross-linking (10 min). The composite hydrogels exhibited superior tensile mechanical properties, increased β-sheet content, and decreased chain mobility compared to that of the pristine RSF hydrogels. The composite hydrogels demonstrated Young's modulus as high as ∼8 MPa, which is significantly higher than native cartilage (∼1.5 MPa), and tensile toughness as high as ∼2.4 MJ/m³, which is greater than that of electroactive polymer muscles and at par with RSF/GO composite membranes fabricated by layer-by-layer assembly. Small-angle scattering study reveals the hierarchical structure of photocrosslinked RSF hydrogels to comprise randomly distributed water-poor (hydrophobic) and water-rich (hydrophilic) regions at the nanoscale, whereas water pores and channels exhibiting fractal-like characteristics at the microscale. The size of hydrophobic domain (containing β-sheets) was observed to increase slightly with GO incorporation and/or alcohol post-treatment, whereas the size of the hydrophilic domain (intersheet distance containing random coils) was observed to increase significantly, which influences/affects water uptake capacity, cross-link density, and mechanical properties of hydrogels. The presented results have implications for both fundamental understanding of the structure-property relationship of RSF-based hydrogels and their technological applications.

Peptide Nanofiber Substrates for Long-Term Culturing of Primary Neurons

The culturing of primary neurons represents a central pillar of neuroscience research. Primary neurons are derived directly from brain tissue and recapitulate key aspects of neuronal development in an in vitro setting. Unlike neural stem cells, primary neurons do not divide; thus, initial attachment of cells to a suitable substrate is critical. Commonly used polylysine substrates can suffer from batch variability owing to their polymeric nature. Herein, we report the use of chemically well-defined, self-assembling tetrapeptides as substrates for primary neuronal culture. These water-soluble peptides assemble into fibers which facilitate adhesion and development of primary neurons, their long-term survival (>40 days), synaptic maturation, and electrical activity. Furthermore, these substrates are permissive toward neuronal transfection and transduction which, coupled with their uniformity and reproducible nature, make them suitable for a wide variety of applications in neuroscience.

A Recent Perspective on Noncovalently Formed Polymeric Hydrogels

Chemically crosslinked covalent hydrogels form a permanent and often strong network, and have been extensively used so far in drug delivery and tissue engineering. However, it is more difficult to induce dynamic and highly tunable changes in these hydrogels. Noncovalently formed hydrogels show promise as inherently reversible systems with an ability to change in response to dynamic environments, and have garnered strong interest recently. In this Personal Account, we elucidate a few key attractive properties of noncovalent hydrogels and describe recent developments in hydrogels crosslinked using various different noncovalent interactions. These hydrogels offer huge control for modulating material properties and could be more relevant mimics for biological systems.