The chemical identity, state and structure of catalytically active centers during the electrochemical CO2 reduction on porous Fe-nitrogen-carbon (Fe-N-C) materials

Heterogeneous Single-Atom Catalysts for Electrochemical CO2 Reduction Reaction

The electrochemical CO₂ reduction reaction (CO₂ RR) is of great importance to tackle the rising CO₂ concentration in the atmosphere. The CO₂ RR can be driven by renewable energy sources, producing precious chemicals and fuels, with the implementation of this process largely relying on the development of low-cost and efficient electrocatalysts. Recently, a range of heterogeneous and potentially low-cost single-atom catalysts (SACs) containing non-precious metals coordinated to earth-abundant elements have emerged as promising candidates for the CO₂ RR. Unfortunately, the real catalytically active centers and the key factors that govern the catalytic performance of these SACs remain ambiguous. Here, this ambiguity is addressed by developing a fundamental understanding of the CO₂ RR-to-CO process on SACs, as CO accounts for the major product from CO₂ RR on SACs. The reaction mechanism, the rate-determining steps, and the key factors that control the activity and selectivity are analyzed from both experimental and theoretical studies. Then, the synthesis, characterization, and the CO₂ RR performance of SACs are discussed. Finally, the challenges and future pathways are highlighted in the hope of guiding the design of the SACs to promote and understand the CO₂ RR on SACs.

Metal-Nitrogen-Carbon Electrocatalysts for CO2 Reduction towards Syngas Generation

Shifting syngas (an H₂ /CO mixture) production away from fossil-fuel-dependent processes (e.g., steam methane reforming and coal gasification) is mandatory, as syngas is of interest as both a fuel and as a value-added chemical precursor. With appropriate electrocatalysts, such as silver-based and metal-nitrogen-carbon (M-N-C) materials, the electrochemical CO₂ reduction reaction (CO₂ RR) allows for the production of CO alongside H₂ (from the hydrogen evolution reaction), and thus leads to syngas generation. In this Minireview, the application of M-N-C electrocatalysts for syngas generation is discussed. The mechanisms leading to different faradaic selectivities for CO are reviewed as a function of the nature of the metal, by using both computational and experimental approaches. The role played by the metal-free moieties in the M-N-C electrocatalysts is underlined. Since M-N-C electrocatalysts only recently entered the CO₂ RR field (as opposed to Cu-, Ag-, or Au-based nanostructures), they have been mainly characterized in static liquid environments, in which the reaction rate is significantly hampered by CO₂ -dissolution/diffusion limitations. Therefore, the design of CO₂ RR electrolyzers for M-N-C electrocatalysts is addressed, and designs such as zero-gap electrolyzers with anionic membranes and humidified CO₂ gas feed at the cathode are highlighted.

PGM-Free Fe/N/C and Ultralow Loading Pt/C Hybrid Cathode Catalysts with Enhanced Stability and Activity in PEM Fuel Cells

In this work, the stability behaviors of the state-of-the-art Fe/N/C and Pt/C catalysts (as well as the activation time of the latter) were first systematically investigated, under different cathode catalyst loadings, in the membrane electrode assemblies (MEA) in PEM fuel cells. Based on that, two types of cathode electrodes with the combination of Fe/N/C and Pt/C catalysts were developed (type I: layered hybrid catalysts with Pt/C next to the membrane and type II: uniformly mixed catalysts). In this way, the shortcomings of the Fe/N/C catalyst (the fast decay) and the Pt/C catalyst (the long activation time) can be compensated at the same time. The hybrid catalysts also showed a very short activation time (a few hours vs over 10 h for Pt/C with the same Pt loading). Comparing the two types of hybrid catalysts, type I shows a much higher current density. The loadings of the Fe/N/C and Pt/C catalysts in the hybrid electrode were systematically studied, with optimal values of 1.0 mg cm^-2 for Fe/N/C and 0.035 mg_Pt cm^-2 for Pt/C. The Pt loading of this hybrid catalyst (type I) at the cathode only takes ca. 30% of the U.S. Department of Energy (DOE) target of Pt usage (0.100 mg_Pt cm^-2), while its mass activity of Pt (in H₂/O₂ PEMFC) is 0.22 A mg_Pt^-1 at 0.9_iR-free V, reaching half of the DOE activity target (0.44 A mg_Pt^-1), which is among the best performances reported so far. Via both half-cell and single-cell electrochemical evaluations together with other characterizations, the origin of the improved activity and stability is believed to be the synergistic effect between Pt/C and Fe/N/C catalysts to ORR. This work provides an effective strategy for engineering highly performing MEA for the industrialization of PEM fuel cells.

Transition metal-based catalysts for the electrochemical CO2 reduction: from atoms and molecules to nanostructured materials

An overview of the main strategies for the rational design of transition metal-based catalysts for the electrochemical conversion of CO₂, ranging from molecular systems to single-atom and nanostructured catalysts.

Synergistic Catalysis over Iron-Nitrogen Sites Anchored with Cobalt Phthalocyanine for Efficient CO2 Electroreduction

Simultaneously achieving high Faradaic efficiency, current density, and stability at low overpotentials is essential for industrial applications of electrochemical CO₂ reduction reaction (CO₂ RR). However, great challenges still remain in this catalytic process. Herein, a synergistic catalysis strategy is presented to improve CO₂ RR performance by anchoring Fe-N sites with cobalt phthalocyanine (denoted as CoPc©Fe-N-C). The potential window of CO Faradaic efficiency above 90% is significantly broadened from 0.18 V over Fe-N-C alone to 0.71 V over CoPc©Fe-N-C while the onset potential of CO₂ RR over both catalysts is as low as -0.13 V versus reversible hydrogen electrode. What is more, the maximum CO current density is increased ten times with significantly enhanced stability. Density functional theory calculations suggest that anchored cobalt phthalocyanine promotes the CO desorption and suppresses the competitive hydrogen evolution reaction over Fe-N sites, while the *COOH formation remains almost unchanged, thus demonstrating unprecedented synergistic effect toward CO₂ RR.

57 Fe Mössbauer Spectroscopy Characterization of Electrocatalysts

This work addresses the importance of Mössbauer spectroscopy for the characterization of iron-containing electrocatalysts. The most important aspects of electrocatalysis and Mössbauer spectroscopy are summarized. Next, Fe-N-C catalysts and important conclusions made by this technique on preparation, active site identification and degradation are summarized. Furthermore, recent highlights derived for other iron-containing electrocatalysts are summarized.

Nitrogen-Doped Carbon Cages Encapsulating CuZn Alloy for Enhanced CO2 Reduction

CuZn alloy, regarded as the active sites, shows excellent catalytic activity for the reverse water gas shift reaction, whereas the incorporation of N atoms, especially pyridinic N, can greatly improve its catalytic properties because of the strong promotion capacity for adsorption and activation of CO₂ molecules. Herein, the synthesis strategy involving Cu-doped Zn-based metal-organic frameworks is utilized to prepare CuZn alloy coated in an N-doped carbon shell. The excellent catalytic ability for CO₂ transformation originates from the synergistic catalytic effect between CuZn alloy and pyridinic N. The strong adsorption and activation capacity for CO₂ of pyridinic N is ascribed to the lone pair of electrons on the N atom and the high electron density in its vicinity.

Morphological Attributes Govern Carbon Dioxide Reduction on N-Doped Carbon Electrodes

The morphology of electrode materials is often overlooked when comparing different carbon-based electrocatalysts for carbon dioxide reduction. To investigate the role of morphological attributes, we studied polymer-derived, interconnected, N-doped carbon structures with uniformly sized meso or macropores, differing only in the pore size. We found that the carbon dioxide reduction selectivity (versus the hydrogen evolution reaction) increased around three times just by introducing the porosity into the carbon structure (with an optimal pore size of 27 nm). We attribute this change to alterations in the wetting and CO₂ adsorption properties of the carbon catalysts. These insights offer a new platform to advance CO₂ reduction performance by only morphological engineering of the electrocatalyst.

Emerging Carbon-Based Heterogeneous Catalysts for Electrochemical Reduction of Carbon Dioxide into Value-Added Chemicals

The electrocatalytic reduction of CO₂ provides a sustainable way to mitigate CO₂ emissions, as well as store intermittent electrical energy into chemicals. However, its slow kinetics and the lack of ability to control the products of the reaction inhibit its industrial applications. In addition, the immature mechanistic understanding of the reduction process makes it difficult to develop a selective, scalable, and stable electrocatalyst. Carbon-based materials are widely considered as a stable and abundant alternative to metals for catalyzing some of the key electrochemical reactions, including the CO₂ reduction reaction. In this context, recent research advances in the development of heterogeneous nanostructured carbon-based catalysts for electrochemical reduction of CO₂ are summarized. The leading factors for consideration in carbon-based catalyst research are discussed by analyzing the main challenges faced by electrochemical reduction of CO₂ . Then the emerging metal-free doped carbon and aromatic N-heterocycle catalysts for electrochemical reduction of CO₂ with an emphasis on the formation of multicarbon hydrocarbons and oxygenates are discussed. Following that, the recent progress in metal-nitrogen-carbon structures as an extension of carbon-based catalysts is scrutinized. Finally, an outlook for the future development of catalysts as well as the whole electrochemical system for CO₂ reduction is provided.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.