Molecular catalysis of CO2 reduction: recent advances and perspectives in electrochemical and light-driven processes with selected Fe, Ni and Co aza macrocyclic and polypyridine complexes

Visible-Light-Driven Hydroacylation of Unactivated Alkenes Using Readily Available Acyl Donors

Herein, we report visible-light-driven hydroacylation of unactivated alkenes. We employed benzimidazolines as new acyl donors and achieved perfect regioselectivity, high functional-group tolerance, and excellent substrate generality. We also performed mechanistic experiments to elucidate the detailed reaction mechanism. This is the first example of (1) hydroacylation of unactivated alkenes using (2) easily prepared acyl donors under (3) visible-light irradiation. Our findings offer a new strategy to synthesize a wide variety of ketones under mild conditions.

Bio-Inspired Bimetallic Cooperativity Through a Hydrogen Bonding Spacer in CO2 Reduction

At the core of carbon monoxide dehydrogenase (CODH) active site two metal ions together with hydrogen bonding scheme from amino acids orchestrate the interconversion between CO₂ and CO. We have designed a molecular catalyst implementing a bimetallic iron complex with an embarked second coordination sphere with multi-point hydrogen-bonding interactions. We found that, when immobilized on carbon paper electrode, the dinuclear catalyst enhances up to four fold the heterogeneous CO₂ reduction to CO in water with an improved selectivity and stability compared to the mononuclear analogue. Interestingly, quasi-identical catalytic performances are obtained when one of the two iron centers was replaced by a redox inactive Zn metal, questioning the cooperative action of the two metals. Snapshots of X-ray structures indicate that the two metalloporphyrin units tethered by a urea group is a good compromise between rigidity and flexibility to accommodate CO₂ capture, activation, and reduction.

Electrocatalytic CO2 Reduction with a Binuclear Bis-Terpyridine Pyrazole-Bridged Cobalt Complex

A pyrazole-based ligand substituted with terpyridine groups at the 3 and 5 positions has been synthesized to form the dinuclear cobalt complex 1, that electrocatalytically reduces carbon dioxide (CO₂ ) to carbon monoxide (CO) in the presence of Brønsted acids in DMF. Chemical, electrochemical and UV-vis spectro-electrochemical studies under inert atmosphere indicate pairwise reduction processes of complex 1. Infrared spectro-electrochemical studies under CO₂ and CO atmosphere are consistent with a reduced CO-containing dicobalt complex which results from the electroreduction of CO₂ . In the presence of trifluoroethanol (TFE), electrocatalytic studies revealed single-site mechanism with up to 94 % selectivity towards CO formation when 1.47 M TFE were present, at -1.35 V vs. Saturated Calomel Electrode in DMF (0.39 V overpotential). The low faradaic efficiencies obtained (<50 %) are attributed to the generation of CO-containing species formed during the electrocatalytic process, which inhibit the reduction of CO₂ .

Promoting Photocatalytic Carbon Dioxide Reduction by Tuning the Properties of Cocatalysts

Suppressing the amount of carbon dioxide in the atmosphere is an essential measure toward addressing global warming. Specifically, the photocatalytic CO₂ reduction reaction (CRR) is an effective strategy because it affords the conversion of CO₂ into useful carbon feedstocks by using sunlight and water. However, the practical application of photocatalyst-promoting CRR (CRR photocatalysts) requires significant improvement of their conversion efficiency. Accordingly, extensive research is being conducted toward improving semiconductor photocatalysts, as well as cocatalysts that are loaded as active sites on the photocatalysts. In this review, we summarize recent research and development trends in the improvement of cocatalysts, which have a significant impact on the catalytic activity and selectivity of photocatalytic CRR. We expect that the advanced knowledge provided on the improvement of cocatalysts for CRR in this review will serve as a general guideline to accelerate the development of highly efficient CRR photocatalysts.

Synergistic Porosity and Charge Effects in a Supramolecular Porphyrin Cage Promote Efficient Photocatalytic CO2 Reduction

We present a supramolecular approach to catalyzing photochemical CO2 reduction through second-sphere porosity and charge effects. An iron porphyrin box (PB) bearing 24 cationic groups, FePB-2(P), was made via post-synthetic modification of an alkyne-functionalized supramolecular synthon. FePB-2(P) promotes the photochemical CO2 reduction reaction (CO2 RR) with 97 % selectivity for CO product, achieving turnover numbers (TON) exceeding 7000 and initial turnover frequencies (TOFmax ) reaching 1400 min-1 . The cooperativity between porosity and charge results in a 41-fold increase in activity relative to the parent Fe tetraphenylporphyrin (FeTPP) catalyst, which is far greater than analogs that augment catalysis through porosity (FePB-3(N), 4-fold increase) or charge (Fe p-tetramethylanilinium porphyrin (Fe-p-TMA), 6-fold increase) alone. This work establishes that synergistic pendants in the secondary coordination sphere can be leveraged as a design element to augment catalysis at primary active sites within confined spaces.

Supramolecular multi-electron redox photosensitisers comprising a ring-shaped Re(i) tetranuclear complex and a polyoxometalate

Redox photosensitisers (PSs) play essential roles in various photocatalytic reactions. Herein, we synthesised new redox PSs of 1 : 1 supramolecules that comprise a ring-shaped Re(i) tetranuclear complex with 4+ charges and a Keggin-type heteropolyoxometalate with 4- charges. These PSs photochemically accumulate multi-electrons in one molecule (three or four electrons) in the presence of an electron donor and can supply electrons with different reduction potentials. PSs were successfully applied in the photocatalytic reduction of CO₂ using catalysts (Ru(ii) and Re(i) complexes) and triethanolamine as a reductant. In photocatalytic reactions, these supramolecular PSs supply a different number of electrons to the catalyst depending on the redox potential of the intermediate, which is made from the one-electron-reduced species of the catalyst and CO₂. Based on these data, information on the reduction potentials of the intermediates was obtained.

CO2 Electroreduction on Carbon-Based Electrodes Functionalized with Molecular Organometallic Complexes—A Mini Review

Heterogeneous electrochemical CO2 reduction has potential advantages with respect to the homogeneous counterpart due to the easier recovery of products and catalysts, the relatively small amounts of catalyst necessary for efficient electrolysis, the longer lifetime of the catalysts, and the elimination of solubility problems. Unfortunately, several disadvantages are also present, including the difficulty of designing the optimized and best-performing catalysts by the appropriate choice of the ligands as well as a larger heterogeneity in the nature of the catalytic site that introduces differences in the mechanistic pathway and in electrogenerated products. The advantages of homogeneous and heterogeneous systems can be preserved by anchoring intact organometallic molecules on the electrode surface with the aim of increasing the dispersion of active components at a molecular level and facilitating the electron transfer to the electrocatalyst. Electrode functionalization can be obtained by non-covalent or covalent interactions and by direct electropolymerization on the electrode surface. A critical overview covering the very recent literature on CO2 electroreduction by intact organometallic complexes attached to the electrode is summarized herein, and particular attention is given to their catalytic performances. We hope this mini review can provide new insights into the development of more efficient CO2 electrocatalysts for real-life applications.

Bioelectrocatalytic CO2 Reduction by Redox Polymer-Wired Carbon Monoxide Dehydrogenase Gas Diffusion Electrodes

The development of electrodes for efficient CO₂ reduction while forming valuable compounds is critical. The use of enzymes as catalysts provides the advantage of high catalytic activity in combination with highly selective transformations. We describe the electrical wiring of a carbon monoxide dehydrogenase II from Carboxydothermus hydrogenoformans (ChCODH II) using a cobaltocene-based low-potential redox polymer for the selective reduction of CO₂ to CO over gas diffusion electrodes. High catalytic current densities of up to -5.5 mA cm^-2 are achieved, exceeding the performance of previously reported bioelectrodes for CO₂ reduction based on either carbon monoxide dehydrogenases or formate dehydrogenases. The proposed bioelectrode reveals considerable stability with a half-life of more than 20 h of continuous operation. Product quantification using gas chromatography confirmed the selective transformation of CO₂ into CO without any parasitic co-reactions at the applied potentials.

Atomically Thin, Ionic-Covalent Organic Nanosheets for Stable, High-Performance Carbon Dioxide Electroreduction

The incorporation of charged functional groups is effective to modulate the activity of molecular complexes for the CO₂ reduction reaction (CO₂ RR), yet long-term heterogeneous electrolysis is often hampered by catalyst leaching. Herein, an electrocatalyst of atomically thin, cobalt-porphyrin-based, ionic-covalent organic nanosheets (CoTAP-iCONs) is synthesized via a post-synthetic modification strategy for high-performance CO₂ -to-CO conversion. The cationic quaternary ammonium groups not only enable the formation of monolayer nanosheets due to steric hindrance and electrostatic repulsion, but also facilitate the formation of a *COOH intermediate, as suggested by theoretical calculations. Consequently, CoTAP-iCONs exhibit higher CO₂ RR activity than other cobalt-porphyrin-based structures: an 870% and 480% improvement of CO current densities compared to the monomer and neutral nanosheets, respectively. Additionally, the iCONs structure can accommodate the cationic moieties. In a flow cell, CoTAP-iCONs attain a very small onset overpotential of 40 mV and a stable total current density of 212 mA cm^-2 with CO Faradaic efficiency of >95% at -0.6 V for 11 h. Further coupling the flow electrolyzer with commercial solar cells yields a solar-to-CO conversion efficiency of 13.89%. This work indicates that atom-thin, ionic nanosheets represent a promising structure for achieving both tailored activity and high stability.

Multifunctional Charge and Hydrogen-Bond Effects of Second-Sphere Imidazolium Pendants Promote Capture and Electrochemical Reduction of CO2 in Water Catalyzed by Iron Porphyrins

Microenvironments tailored by multifunctional secondary coordination sphere groups can enhance catalytic performance at primary metal active sites in natural systems. Here, we capture this biological concept in synthetic systems by developing a family of iron porphyrins decorated with imidazolium (im) pendants for the electrochemical CO2 reduction reaction (CO2 RR), which promotes multiple synergistic effects to enhance CO2 RR and enables the disentangling of second-sphere contributions that stem from each type of interaction. Fe-ortho-im(H), which poises imidazolium units featuring both positive charge and hydrogen-bond capabilities proximal to the active iron center, increases CO2 binding affinity by 25-fold and CO2 RR activity by 2000-fold relative to the parent Fe tetraphenylporphyrin (Fe-TPP). Comparison with monofunctional analogs reveals that through-space charge effects have a greater impact on catalytic CO2 RR performance compared to hydrogen bonding in this context.

Bottom-Up Interfacial Design of Covalent Organic Frameworks for Highly Efficient and Selective Electrocatalysis of CO2

Assembling molecular catalytic centers into crosslinked networks is widely used to fabricate heterogeneous catalysts but they often suffer loss in activity and selectivity accompanied by unclear causes. Here, a strategy for the construction of heterogeneous catalysts to induce activity and selectivity by bottom-up introduction of segregated electron-conduction and mass-transport interfaces into the catalytic materials is reported. The catalytic skeletons are designed to possess different π orderings for electron motion and the open channels are tailored to install finely engineered walls for mass transport, so that origins of activity and selectivity are correlated. The resultant covalent organic framework catalysts with ordered π skeletons and solvophobic pores increase activity by two orders of magnitude, enhance selectivity and energy efficiency by 70-fold, and broaden the voltage range, to promote CO₂ transformation under ambient conditions. The results open a way to precise interfacial design of actionable heterogeneous catalysts for producing feedstocks from CO₂ .

A Mesoionic Carbene-Pyridine Bidentate Ligand That Improves Stability in Electrocatalytic CO2 Reduction by a Molecular Manganese Catalyst

Tricarbonyl Group 7 complexes have a longstanding history as efficacious CO₂ electroreduction catalysts. Typically, these complexes feature an auxiliary 2,2'-bipyridine ligand that assists in redox steps by delocalizing the electron density into the ligand orbitals. While this feature lends to an accessible redox potential for CO₂ electroreduction, it also presents challenges for electrocatalysis with Mn because the electron density is removed from metal-ligand bonding orbitals. The results presented here thus introduce a mesoionic carbene (MIC) as a potent ligand platform to promote Mn-based electrocatalysis. The strong σ donation of the N,C-bidentate MIC is shown to help centralize the electron density on the Mn center while also maintaining relevant redox potentials for CO₂ electroreduction. Mechanistic investigation supports catalytic turnover at two operative potentials separated by 400 mV. In the low operating potential regime at -1.54 V, Mn(0) species catalyze CO₂ to CO and CO₃^2-, which has a maximum rate of 7 ± 5 s^-1 and is stable for up to 30.7 h. At higher operating potential at -1.94 V, "Mn(-1)" catalyzes CO₂ to CO and H₂O with faster turnovers of 200 ± 100 s^-1, with the trade-off being less stability at 6.7 h. The relative stabilities of Mn complexes bearing MIC and 4,4'-di-tert-butyl-2,2'-bipyridine were compared by evaluation under the same electrolysis conditions and therefore elucidated that the MIC promotes longevity for CO evolution throughout a 5 h period.

The roles of gold and silver nanoparticles on ZnIn2S4/silver (gold)/tetra(4-carboxyphenyl)porphyrin iron(III) chloride hybrids in carbon dioxide photoreduction

The construction of hybrid catalysts composed of inorganic semiconductors and molecular catalysts shows great potential for achieving high photocatalytic carbon dioxide (CO₂) conversion efficiency. In this study, ZnIn₂S₄ was first synthesized via a solvothermal route. Gold (Au) and silver (Ag) nanoparticles were then deposited on ZnIn₂S₄ via the reduction of noble metal precursor by sulfur vacancy defects. The obtained composite was further combined with tetra(4-carboxyphenyl)porphyrin iron(III) chloride (FeTCPP) molecular catalyst for efficient photocatalytic CO₂ conversion. The roles of different noble metal nanoparticles in charge separation and interfacial electron transfer have been comprehensively studied. The photocatalytic performance and photoelectrochemical characterizations demonstrate that the introduction of Ag or Au nanoparticles is beneficial for charge separation. More importantly, the presence of Ag nanoparticles plays a crucial role in promoting the interfacial charge transfer between ZnIn₂S₄ and FeTCPP, whereas, Au nanoparticles function as active sites for the water reduction reaction.

Co-Doped Mn3 O4 Nanocubes via Galvanic Replacement Reactions for Photocatalytic Reduction of CO2 with High Turnover Number

The synthesis of Co-doped Mn₃ O₄ nanocubes was achieved via galvanic replacement reactions for photo-reduction of CO₂ . Co@Mn₃ O₄ nanocubes could efficiently photo-reduce CO₂ to CO with a remarkable turnover number of 581.8 using [Ru(bpy)₃ ]Cl₂  ⋅ 6H₂ O as photosensitizer and triethanolamine as sacrificial agent in acetonitrile and water. The galvanic replaced Co species are homogeneously distributed at the outer surface of Mn₃ O₄ , providing catalytic active sites during CO₂ reduction reactions, which facilitate the separation and migration of photogenerated charge carriers, further benefiting the outstanding photocatalytic performance of CO₂ reduction. Density functional theory calculations revealed that the decreasing of conduction band maximum in Co@Mn₃ O₄ was beneficial to the electron attachment from the excited sensitized molecule, which promoted photocatalytic reduction of CO₂ .

Cu-based Organic-Inorganic Composite Materials for Electrochemical CO2 Reduction

Electrochemical CO2 reduction reaction (CO2RR) is an attractive pathway to convert CO2 into value-added chemicals and fuels. Copper (Cu) is the most effective monometallic catalyst for converting CO2 into multi-carbon products, but suffers from high overpotentials and poor selectivity. Therefore, it is essential to design efficient Cu-based catalyst to improve the selectivity of specific products. Due to the combination of advantages of organic and inorganic composite materials, organic-inorganic composites exhibit high catalytic performance towards CO2RR, and have been extensively studied. In this review, the research advances of various Cu-based organic-inorganic composite materials in CO2RR, i.e., organic molecular modified-metal Cu composites, Cu-based molecular catalyst/carbon carrier composites, Cu-based metal organic framework (MOF) composites, and Cu-based covalent organic framework (COF) composites are systematically summarized. Particularly, the synthesis strategies of Cu-based composites, structure-performance relationship, and catalytic mechanisms are discussed. Finally, the opportunities and challenges of Cu-based organic-inorganic composite materials in CO2RR are proposed.

Efficient Electrochemical Reduction of CO2 to Formate in Methanol Solutions by Mn-Functionalized Electrodes in the Presence of Amines

Carbon cloth electrode modified by covalently attaching a manganese organometallic catalyst is used as cathode for the electrochemical reduction of CO₂ in methanol solutions. Six different industrial amines are employed as co‐catalyst in millimolar concentrations to deliver a series of new reactive system. While such absorbents were so far believed to provide a CO₂ reservoir and act as sacrificial proton source, we herein demonstrate that this role can be played by methanol, and that the adduct formed between CO₂ and the amine can act as an effector or inhibitor toward the catalyst, thereby enhancing or reducing the production of formate. Pentamethyldiethylentriamine (PMDETA), identified as the best effector in our series, converts CO₂ in wet methanolic solution into bisammonium bicarbonate. Computational studies revealed that this adduct is responsible for a barrierless transformation of CO₂ to formate by the reduced form of the Mn catalyst covalently bonded to the electrode surface. As a consequence, selectivity can be switched on demand from CO to formate anion, and in the case of (PMDETA) an impressive TON_HCOO− of 2.8×10⁴ can be reached. This new valuable knowledge on an integrated capture and utilization system paves the way toward more efficient transformation of CO₂ into liquid fuel.

Exploiting consecutive photoinduced electron transfer (ConPET) in CO2 photoreduction

The consecutive photoinduced electron transfer (ConPET) process of 1,2,3,5-Tetrakis(carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) in CO₂ photoreduction to achieve powerful reducing species has been disclosed by activating a bis(terpyridine)ruthenium(II) complex bearing a high overpotential for selective light-driven reduction of CO₂ to CO in homogeneous solution.

Organic deliquescence: organic vapor-induced dissolution of molecular salts

This report demonstrates organic vapor-induced dissolution of several molecular salts (i.e., organic deliquescence), like water vapor-induced deliquescence. Systematic experiments indicate that appropriate organic deliquescent responses to volatile organic compounds can be designed according to the principle, “like dissolves like”. The phenomena will be useful for developing agents to collect various volatile organic compounds.

Several molecular salts exhibit organic deliquescence in response to organic vapors.

CO2 Electrolysis via Surface-Engineering Electrografted Pyridines on Silver Catalysts

The electrochemical reduction of carbon dioxide (CO₂) to value-added materials has received considerable attention. Both bulk transition-metal catalysts and molecular catalysts affixed to conductive noncatalytic solid supports represent a promising approach toward the electroreduction of CO₂. Here, we report a combined silver (Ag) and pyridine catalyst through a one-pot and irreversible electrografting process, which demonstrates the enhanced CO₂ conversion versus individual counterparts. We find that by tailoring the pyridine carbon chain length, a 200 mV shift in the onset potential is obtainable compared to the bare silver electrode. A 10-fold activity enhancement at −0.7 V vs reversible hydrogen electrode (RHE) is then observed with demonstratable higher partial current densities for CO, indicating that a cocatalytic effect is attainable through the integration of the two different catalytic structures. We extended the performance to a flow cell operating at 150 mA/cm², demonstrating the approach’s potential for substantial adaptation with various transition metals as supports and electrografted molecular cocatalysts.

A general and stereoselective approach to 14-membered cyclic bis-semicarbazones involving BF3-catalyzed amidoalkylation of 2-(trimethylsilyloxy)propene

A general and stereoselective five-step approach to 14-membered cyclic bis-semicarbazones, 5,12-diaryl-7,14-dimethyl-1,2,4,8,9,11-hexaazacyclotetradeca-7,14-diene-3,10-diones, starting from aldehyde semicarbazones has been developed. The key intermediates, 4-(3-oxobut-1-yl)semicarbazones, were prepared by BF₃-catalyzed amidoalkylation of 2-(trimethylsilyloxy)propene with 4-[(aryl)(methoxy)methyl]- or 4-[(aryl)(tosyl)methyl]semicarbazones. Treatment of these intermediates with excess of hydrazine gave hydrazones of 4-(3-oxobut-1-yl)semicarbazones or 4-(3-oxobut-1-yl)semicarbazides, which in the presence of TsOH were converted into the target macrocycles. All steps of this approach could be scaled up easily to the multi-gram level.

Transient Solid-State Laser Activation of Indium for High-Performance Reduction of CO2 to Formate

Deficiencies in understanding the local environment of active sites and limited synthetic skills challenge the delivery of industrially-relevant current densities with low overpotentials and high selectivity for CO₂ reduction. Here, a transient laser induction of metal salts can stimulate extreme conditions and rapid kinetics to produce defect-rich indium nanoparticles (L-In) is reported. Atomic-resolution microscopy and X-ray absorption disclose the highly defective and undercoordinated local environment in L-In. In a flow cell, L-In shows a very small onset overpotential of ≈92 mV and delivers a current density of ≈360 mA cm^-2 with a formate Faradaic efficiency of 98% at a low potential of -0.62 V versus RHE. The formation rate of formate reaches up to 6364.4 µmol h^-1mgIn-1$mg_{{\rm{In}}}^{--1}$ , which is nearly 39 folds higher than that of commercial In (160.7 µmol h^-1mgIn-1$mg_{{\rm{In}}}^{--1}$ ), outperforming most of the previous results that have been reported under KHCO₃ environments. Density function theory calculations suggest that the defects facilitate the formation of *OCHO intermediate and stabilize the *HCOOH while inhibiting hydrogen adsorption. This study suggests that transient solid-state laser induction provides a facile and cost-effective approach to form ligand-free and defect-rich materials with tailored activities.

Molecular Catalysts for the Reductive Homocoupling of CO 2 towards C 2+ Compounds

The conversion of CO₂ into multicarbon (C₂₊) compounds by reductive homocoupling offers the possibility to transform renewable energy into chemical energy carriers and thereby create “carbon‐neutral” fuels or other valuable products. Most available studies have employed heterogeneous metallic catalysts, but the use of molecular catalysts is still underexplored. However, several studies have already demonstrated the great potential of the molecular approach, namely, the possibility to gain a deep mechanistic understanding and a more precise control of the product selectivity. This Minireview summarizes recent progress in both the thermo‐ and electrochemical reductive homocoupling of CO₂ toward C₂₊ products mediated by molecular catalysts. In addition, reductive CO homocoupling is discussed as a model for the further conversion of intermediates obtained from CO₂ reduction, which may serve as a source of inspiration for developing novel molecular catalysts in the future.

Visible light-driven CO2 reduction with a Ru polypyridyl complex bearing an N-heterocyclic carbene moiety

A novel Ru polypyridyl complex with an N-heterocyclic carbene ligand was successfully synthesised and characterised. The complex exhibited an intense absorption band in the visible-light region derived from the strong electron-donating character of the carbene ligand, and efficiently catalysed the visible light-driven CO₂ reduction with the reaction rate of 36.7 h^-1.

Zero-Gap Bipolar Membrane Electrolyzer for Carbon Dioxide Reduction Using Acid-Tolerant Molecular Electrocatalysts

The scaling-up of electrochemical CO₂ reduction requires circumventing the CO₂ loss as carbonates under alkaline conditions. Zero-gap cell configurations with a reverse-bias bipolar membrane (BPM) represent a possible solution, but the catalyst layer in direct contact with the acidic environment of a BPM usually leads to H₂ evolution dominating. Here we show that using acid-tolerant Ni molecular electrocatalysts selective (>60%) CO₂ reduction can be achieved in a zero-gap BPM device using a pure water and CO₂ feed. At a higher current density (100 mA cm^-2), CO selectivity decreases, but was still >30%, due to reversible product inhibition. This study demonstrates the importance of developing acid-tolerant catalysts for use in large-scale CO₂ reduction devices.

Immobilization strategies for porphyrin-based molecular catalysts for the electroreduction of CO2

The ever-growing level of carbon dioxide (CO2) in our atmosphere, is at once a threat and an opportunity. The development of sustainable and cost-effective pathways to convert CO2 to value-added chemicals is central to reducing its atmospheric presence. Electrochemical CO2 reduction reactions (CO2RRs) driven by renewable electricity are among the most promising techniques to utilize this abundant resource; however, in order to reach a system viable for industrial implementation, continued improvements to the design of electrocatalysts is essential to improve the economic prospects of the technology. This review summarizes recent developments in heterogeneous porphyrin-based electrocatalysts for CO2 capture and conversion. We specifically discuss the various chemical modifications necessary for different immobilization strategies, and how these choices influence catalytic properties. Although a variety of molecular catalysts have been proposed for CO2RRs, the stability and tunability of porphyrin-based catalysts make their use particularly promising in this field. We discuss the current challenges facing CO2RRs using these catalysts and our own solutions that have been pursued to address these hurdles.

Photocatalytic Systems for CO2 Reduction: Metal-Complex Photocatalysts and Their Hybrids with Photofunctional Solid Materials

Photocatalytic CO₂ reduction is a critical objective in the field of artificial photosynthesis because it can potentially make a total solution for global warming and shortage of energy and carbon resources. We have successfully developed various highly efficient, stable, and selective photocatalytic systems for CO₂ reduction using transition metal complexes as both photosensitizers and catalysts. The molecular architectures for constructing selective and efficient photocatalytic systems for CO₂ reduction are discussed herein. As a typical example, a mixed system of a ring-shaped Re(I) trinuclear complex as a photosensitizer and fac-[Re(bpy)(CO)₃{OC₂H₄N(C₂H₄OH)₂}] as a catalyst selectively photocatalyzed CO₂ reduction to CO with the highest quantum yield of 82% and a turnover number (TON) of over 600. Not only rare and noble metals but also earth abundant ones, such as Mn(I), Cu(I), and Fe(II) can be used as central metal cations. In the case using a Cu(I) dinuclear complex as a photosensitizer and fac-Mn(bpy)(CO)₃Br as a catalyst, the total formation quantum yield of CO and HCOOH from CO₂ was 57% and TON_CO+HCOOH exceeded 1300.

Efficient supramolecular photocatalysts for CO₂ reduction, in which photosensitizer and catalyst units are connected through a bridging ligand, were developed for removing a diffusion control on collisions between a photosensitizer and a catalyst. Supramolecular photocatalysts, in which [Ru(N^∧N)₃]²⁺-type photosensitizer and Re(I) or Ru(II) catalyst units are connected to each other with an alkyl chain, efficiently and selectively photocatalyzed CO₂ reduction in solutions. Mechanistic studies using time-resolved IR and electrochemical measurements provided molecular architecture for constructing efficient supramolecular photocatalysts. A Ru(II)–Re(I) supramolecular photocatalyst constructed according to this molecular architecture efficiently photocatalyzed CO₂ reduction even when it was fixed on solid materials. Harnessing this property of the supramolecular photocatalysts, two types of hybrid photocatalytic systems were developed, namely, photocatalysts with light-harvesting capabilities and photoelectrochemical systems for CO₂ reduction.

Introduction of light-harvesting capabilities into molecular photocatalytic systems should be important because the intensity of solar light shone on the earth’s surface is relatively low. Periodic mesoporous organosilica, in which methyl acridone groups are embedded in the silica framework as light harvesters, was combined with a Ru(II)–Re(I) supramolecular photocatalyst with phosphonic acid anchoring groups. In this hybrid, the photons absorbed by approximately 40 methyl acridone groups were transferred to one Ru(II) photosensitizer unit, and then, the photocatalytic CO₂ reduction commenced.

To use water as an abundant electron donor, we developed hybrid photocatalytic systems combining metal-complex photocatalysts with semiconductor photocatalysts that display high photooxidation powers, in which two photons are sequentially absorbed by the metal-complex photosensitizer and the semiconductor, resulting in both high oxidation and reduction power. Various types of dye-sensitized molecular photocathodes comprising the p-type semiconductor electrodes and the supramolecular photocatalysts were developed. Full photoelectrochemical cells combining these dye-sensitized molecular photocathodes and n-type semiconductor photoanodes achieved CO₂ reduction using only visible light as the energy source and water as the reductant. Drastic improvement of dye-sensitized molecular photocathodes is reported.

The results presented in this Account clearly indicate that we can construct very efficient, selective, and durable photocatalytic systems constructed with the metal-complex photosensitizers and catalysts. The supramolecular-photocatalyst architecture in which the photosensitizer and the catalyst are connected to each other is useful especially on the surface of solid owing to rapid electron transfer from the photosensitizer to the catalyst. On basis of these findings, we successfully constructed hybrid systems of the supramolecular photocatalysts with photoactive solid materials. These hybridizations can add new functions to the metal-complex photocatalytic systems, such as water oxidation and light harvesting.

Ordered heterogeneity of molecular photosensitizer toward enhanced photocatalysis

The photosensitizer is one of the important components in the photocatalytic system. Molecular photosensitizers have well-defined structures, which is beneficial in revealing the catalysis mechanism and helpful for further structural design and performance optimization. However, separation and recycling of the molecular photosensitizers is a great problem. Loading them into/on two/three-dimensional supports through covalent bonds, electrostatic interactions, and supramolecular interactions is a method that enhances their separation and recycling capability. Nonetheless, the structures of the resulting composites are unclear. Thus, the development of highly crystalline heterogeneity methods for molecular photosensitizers, albeit greatly challenging, is meaningful and desirable in photocatalysis, through which heterogeneous photosensitizers with well-defined structures, definite catalysis mechanisms, and good catalytic performance would be expected.

Ordered heterogeneity is significant for molecular photosensitizers to enhance their practical applications. However, the ordered heterogeneity of molecular photosensitizers is still a great challenge. In this article, we describe a supramolecular assembly method for the heterogeneity of molecular photosensitizers, with which a mononuclear Zn(II) molecular photosensitizer in solution was orderly assembled in long range via π–π stacking interactions, affording a cheap, solid photocatalyst (π-1) with a porous structure. With Co(II), Fe(III), or Ni(II) as a cocatalyst, π-1 shows noticeably better photocatalytic activity for CO₂ reduction than in a homogeneous system. The definite crystal structure and precise position of the catalytic center in π-1 were determined by single-crystal X-ray diffraction combined with X-ray diffraction adsorption spectra, based on which the enhanced activity of π-1 for photocatalytic CO₂ reduction was revealed by theoretical calculation. Thus, the reduced energy gap after ordered heterogeneity accelerates the electron transfer, greatly boosting the photocatalytic CO₂ reduction activity. This work demonstrates a method for developing crystalline, heterogeneous photocatalysts with definite structures and enhanced, catalytic performance.

Understanding the Role of Inter- and Intramolecular Promoters in Electro- and Photochemical CO2 Reduction Using Mn, Re, and Ru Catalysts

Recycling of carbon dioxide to fuels and chemicals is a promising strategy for renewable energy storage. Carbon dioxide conversion can be achieved by (i) artificial photosynthesis using photoinduced electrons; (ii) electrolysis using electricity produced by photovoltaics; and (iii) thermal CO₂ hydrogenation using renewable H₂. The focus of our group's research is on molecular catalysts, in particular coordination complexes of transition metals (e.g., Mn, Re, and Ru), which offer versatile platforms for mechanistic studies of photo- and electrochemical CO₂ reduction. The interactions of catalytic intermediates with Lewis or Brønsted acids, hydrogen-bonding moieties, solvents, cations, etc., that function as promoters or cofactors have become increasingly important for efficient catalysis. These interactions may have dramatic effects on selectivity and rates by stabilizing intermediates or lowering transition state barriers, but they are difficult to elucidate and challenging to predict. We have been carrying out experimental and theoretical studies of CO₂ reduction using molecular catalysts toward addressing mechanisms of efficient CO₂ reduction systems with emphasis on those containing intramolecular (or pendent) and intermolecular (solution phase) additives. This Account describes the identification of reaction intermediates produced during CO₂ reduction in the presence of triethanolamine or ionic liquids, the benefits of hydrogen-bonding interactions among intermediates or cofactors, and the complications of pendent phenolic donors/phenoxide bases under electrochemical conditions.Triethanolamine (TEOA) is a common sacrificial electron donor for photosensitizer excited state reductive quenching and has a long history of use in photocatalytic CO₂ reduction. It also functions as a Brønsted base in conjunction with more potent sacrificial electron donors, such as 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH). Deprotonation of the BIH^•+ cation radical promotes irreversible photoinduced electron transfer by preventing charge recombination. Despite its wide use, most research to date has not considered the broader reactions of TEOA, including its direct interaction with CO₂ or its influence on catalytic intermediates. We found that in acetonitrile, TEOA captures CO₂ in the form of a zwitterionic adduct without any metal catalyst. In the presence of ruthenium carbonyl catalysts bearing α-diimine ligands, it participates in metal hydride formation, accelerates hydride transfer to CO₂ to form the bound formate intermediate, and assists in the dissociation of formate anion from the catalyst ( J. Am. Chem. Soc. 2020, 142, 2413-2428).Hydrogen bonding and acid/base promoters are understood to interact with key catalytic intermediates, such as the metallocarboxylate or metallocarboxylic acid during CO₂ reduction. The former is a high energy species, and hydrogen-bonding or Lewis acid-stabilization are beneficial. We have found that imidazolium-based ionic liquid cations can stabilize the doubly reduced form of the [ReCl(bpy)(CO)₃] (bpy = 2,2'-bipyridine) electrocatalyst through both hydrogen-bonding and π-π interactions, resulting in CO₂ reduction occurring at a more positive potential with a higher catalytic current ( J. Phys. Chem. Lett. 2014, 5, 2033-2038). Hydrogen bonding interactions between Lewis basic methoxy groups in the second coordination sphere of a Mn-based catalyst and the OH group of the Mn-COOH intermediate in the presence of a Brønsted acid were also found to promote C-(OH) bond cleavage, enabling access to a low-energy protonation-first pathway for CO₂ reduction ( J. Am. Chem. Soc. 2017, 139, 2604-2618).The kinetics of forming the metallocarboxylic acid can be enhanced by internal acids, and its proton-induced C-OH bond cleavage to the metallocarbonyl and H₂O is often the rate-limiting step. Therefore, proton movement organized by pendent hydrogen-bonding networks may also accelerate this step. In contrast, during electrolysis, OH groups in the second coordination sphere are deprotonated to the oxyanions, which deter catalytic CO₂ reduction by directly binding CO₂ to form the carbonate or by making an M-O bond in competition with CO₂ binding ( Inorg. Chem. 2016, 55, 4582-4594). Our results emphasize that detailed mechanistic research is critical in discovering the design principles for improved catalysts.

Modulating carbon dioxide activation on carbon nanotube immobilized salophen complexes by varying metal centers for efficient electrocatalytic reduction

Electrocatalytic CO₂ reduction (ECR) into valuable chemicals, especially driven by renewable energy, presents a promising pattern to realize carbon neutrality. Site-isolated metal complexes flourish in the area of ECR as single-atom-like catalysts because of their competent and tailorable activity. In this study, salophen-based metal (Fe, Co, Ni and Cu) complexes were anchored onto carbon nanotubes (CNTs) to construct efficient catalysts for electrochemically converting CO₂ to CO. Both experimental and theoretical results verified that CO₂ activation was the rate-determining step for the catalytic performance of these hybrid molecular catalysts. The coordinate activation ability can be manipulated by varying the metal centers. The as-synthesized Fe-salophen hybrid CNT (Fe-salophen/CNT) shows the best activity and selectivity of -13.24 mA·cm^-2 current density with 86.8% Faradaic efficiency for generating CO (FE_CO) at -0.76 V vs. RHE in aqueous solution, whereas Cu-salophen/CNT only achieved a -2.22 mA·cm^-2 current density and 57.9% FE_CO under the same reaction conditions. These distinct catalytic performances resulted from the different coordination activation abilities of CO₂ on various metal centers.

Applications of Carbon Dots for the Photocatalytic and Electrocatalytic Reduction of CO2

The photocatalytic and electrocatalytic conversion of CO2 has the potential to provide valuable products, such as chemicals or fuels of interest, at low cost while maintaining a circular carbon cycle. In this context, carbon dots possess optical and electrochemical properties that make them suitable candidates to participate in the reaction, either as a single component or forming part of more elaborate catalytic systems. In this review, we describe several strategies where the carbon dots participate, both with amorphous and graphitic structures, in the photocatalysis or electrochemical catalysis of CO2 to provide different carbon-containing products of interest. The role of the carbon dots is analyzed as a function of their redox and light absorption characteristics and their complementarity with other known catalytic systems. Moreover, detailed information about synthetic procedures is also reviewed.

CO2 Electrolysis System under Industrially Relevant Conditions

ConspectusCarbon dioxide emissions from consumption of fossil fuels have caused serious climate issues. Rapid deployment of new energies makes renewable energy driven CO₂ electroreduction to chemical feedstocks and carbon-neutral fuels a feasible and cost-effective pathway for achieving net-zero emission. With the urgency of the net-zero goal, we initiated our research on CO₂ electrolysis with emphasis on industrial relevance.The CO₂ molecules are thermodynamically stable due to high activation energy of the two C═O bonds, and efficient electrocatalysts are required to overcome the sluggish dynamics and competitive hydrogen evolution reaction. The CO₂ electrocatalysts that we have explored include molecular catalysts and nanostructured catalysts. Molecular catalysts are centered on earth abundant elements such as Fe and Co for catalyzing CO₂ reduction, and using Fe catalysts, we proposed an amidation strategy for reduction of CO₂ to methanol, bypassing the inactive formate pathway. For nanostructured catalysts, we developed a carbon enrichment strategy using nitrogen-rich nanomaterials for selective CO₂ reduction.Direct CO₂ electroreduction from the flue gas stream represents the "holy grail" in the field, because typical CO₂ concentration in flue gas is only 6-15%, posing a significant challenge for CO₂ electrolysis. On the other hand, direct electroreduction of CO₂ in the flue gas eliminates the carbon capture process and simplifies the overall carbon capture and utilization (CCU) scheme. However, direct flue gas reduction is frustrated by the reactive oxygen (5-8%), low CO₂ concentration (6-15%), and potentially toxic impurities. Surface CO₂ enrichment catalysts with high O₂ tolerance could be viable for achieving direct CO₂ electroreduction for decarbonization of flue gas.In addition to the electrocatalysts, the incorporation of catalysts into the electrolyzer and development of a suitable process was also investigated to meet industrial demands. A membrane electrode assembly (MEA) is a zero-gap configuration with cathode and anode catalysts coated on either side of an ion exchange membrane. We adopted the MEA configuration due to the structural simplicity, low ohmic resistance, and high efficiency. The electrode factors (for example, membrane type, catalyst layer porosity, and MEA fabrication method) and the electrolyzer factors (for example, flow channels, gas diffusion layer) are critical to highly efficient operation. We separately developed an anion-exchange membrane-based system for CO production and cation-exchange membrane-based system for formate production. The optimized electrolyzer configuration can generate uniform current and voltage distribution in a large-area electrolyzer and operate using an industrial CO₂ stream. The optimized process was developed with the targets of long-term continuous operation and no electrolyte consumption.