RGB tri-luminescence in organic-inorganic zirconium halide perovskites

Materials with two or more fluorescence features under different excitation sources have great potential in optical applications, but luminous materials with three emission characteristics have been largely undeveloped. Here, we report a novel zero-dimensional (0D) organic-inorganic hybrid ((C2H5)4N)2ZrCl6 perovskite with multiple emissions. The zirconium-based perovskite exhibits a red emission around 620 nm, a green emission at 527 nm, and a blue emission around 500 nm. The red and green emissions come from self-trapped excitons (STEs) and the d-d transitions of Zr(iv), respectively, which are caused by distortion of the [ZrCl6]2- octahedra. The blue emission is caused by thermally activated delayed fluorescence (TADF), which is similar to that of Cs2ZrCl6. The absolute photoluminescence quantum yield (PLQY) of the red and blue double emission is up to 83% and the PLQY of the green emission is 27%. With different combinations of ((C2H5)4N)2ZrCl6 samples, we achieve a variety of applications, including a two-color luminescent anti-counterfeiting device, a white light-emitting diode (WLED) with a color rendering index (CRI) of 95 and information encryption with different excitations. We also synthesize other hybrid zirconium perovskites with tri-luminescence through a similar method. Our work provides a potential set of excitation-dependent luminescent materials and is expected to expand the basic research and practical applications of multi-luminescence materials.

Polymeric Metal Halides with Bright Luminescence and Versatile Processability

Most of current metal halide materials, including all inorganic and organic-inorganic hybrids, are crystalline materials with poor workability and plasticity that limit their application scope. Here, we develop a novel class of materials termed polymeric metal halides (PMHs) through introducing polycations into antimony-based metal halide materials as A-site cations. A series of PMHs with orange-yellow broadband emission and large Stokes shift originating from inorganic self-trapped excitons are successfully prepared, which meanwhile exhibit the excellent processability and formability of polymers. The versatility of these PMHs is manifested as the broad choices of polycations, the ready extension to manganese- and copper-based halides, and the tolerance to molar ratios between polycations and metal halides in the formation of PMHs. The merger of polymer chemistry and inorganic chemistry thus provides a novel generic platform for the development of metal halide functional materials.

Development of Quasi-Two-Dimensional Perovskites and Their Application in Light-Emitting Diodes

Quasi-two-dimensional (quasi-2D) perovskites have attracted much attention due to their outstanding properties, such as inherent quantum-well structure, strong dielectric and quantum confinement, large exciton binding energy, and high photoluminescence quantum yield. By virtue of these superior merits, quasi-2D perovskites have shown great potential for next-generation light-emitting diodes (LEDs). Herein, this review presents an overview of the basic properties of quasi-2D perovskites and their photoluminescence modulations by large organic cation engineering, monovalent cation engineering, halogen engineering, defect passivation engineering, and dimensionality engineering. Furthermore, the strategies of charge-transport layer optimization, interfacial engineering, light-outcoupling efficiency improvement, and operating stability improvement are summarized for fabricating high-performance quasi-2D perovskite LEDs (PeLEDs). Finally, the challenges and outlook for the future development of quasi-2D PeLEDs are unambiguously proposed.

Designing Optical Anisotropy: Silver-Aminoalkylpyridine Nitrate Complexes with Tunable Structures

To introduce a design strategy for improving optical properties, two silver-amino alkylpyridine nitrate complexes, AgC6H8N3O3 and Ag2C14H20N6O6, were successfully synthesized using a recrystallization method. By employing polarizable π-conjugated [NO3-] ions, two types of pyridine ligands, and silver cations with a high affinity for pyridine, we obtained a one-dimensional chain structure with 4-aminomethylpyridine (AgC6H8N3O3) and a zero-dimensional molecular compound by introducing a relatively flexible aliphatic chain with 4-(2-aminoethyl)pyridine (Ag2C14H20N6O6). The compounds crystallize in the triclinic crystal system with the centrosymmetric P-1 space group, exhibiting a change in orientation between the π-conjugated system and the silver ion. Despite similar optical band gaps (3.69 eV for AgC6H8N3O3 and 3.73 eV for Ag2C14H20N6O6), AgC6H8N3O3 shows higher absorption in the 350-600 nm range. Electronic structure calculations support the ultraviolet absorption findings, suggesting that charge transfer with π-conjugated systems influences birefringence. Ag2C14H20N6O6 exhibits experimental birefringence (0.261@546.1 nm) surpassing that of AgC6H8N3O3 (0.212@546.1 nm), placing it among the highest recorded values within metal-pyridine incorporating nitrate complexes. The nonconventional orientation of π-conjugated [NO3-] ions contributes to this phenomenon, enhancing the action of free π-conjugated orbitals. This design strategy for micromodulating the alignment of the π-conjugated system promises to be an effective approach for enhancing optical properties, such as birefringence.

A 0D hybrid lead-free halide with near-unity photoluminescence quantum yield toward multifunctional optoelectronic applications

Zero-dimensional (0D) hybrid metal halides have emerged as highly efficient luminescent materials, but integrated multifunction in a structural platform remains a significant challenge. Herein, a new hybrid 0D indium halide of (Im-BDMPA)InCl6·H2O was designed as a highly efficient luminescent emitter and X-ray scintillator toward multiple optoelectronic applications. Specifically, it displays strong broadband yellow light emission with near-unity photoluminescence quantum yield (PLQY) through Sb3+ doping, acting as a down-conversion phosphor to fabricate high-performance white light emitting diodes (WLEDs). Benefiting from the high PLQY and negligible self-absorption characteristics, this halide exhibits extraordinary X-ray scintillation performance with a high light yield of 55 320 photons per MeV, which represents a new scintillator in 0D hybrid indium halides. Further combined merits of a low detection limit (0.0853 μGyair s-1), ultra-high spatial resolution of 17.25 lp per mm and negligible afterglow time (0.48 ms) demonstrate its excellent application prospects in X-ray imaging. In addition, this 0D halide also exhibits reversible luminescence off-on switching toward tribromomethane (TBM) but fails in any other organic solvents with an ultra-low detection limit of 0.1 ppm, acting as a perfect real-time fluorescent probe to detect TBM with ultrahigh sensitivity, selectivity and repeatability. Therefore, this work highlights the multiple optoelectronic applications of 0D hybrid lead-free halides in white LEDs, X-ray scintillation, fluorescence sensors, etc.

Cd8(BO3)4SiO4: Metal Cation Inducing the Formation of Isolated [BO3] and [SiO4] Units in Borate Silicate

The first compound of cadmium-borate silicate Cd8(BO3)4SiO4, crystallizing in space group P42/n (no. 86), has been successfully synthesized by the conventional high-temperature solution method and melts congruently. The zero-dimensional anionic groups of Cd8(BO3)4SiO4 are isolated [BO3] triangles and isolated [SiO4] tetrahedra which are filled in the framework formed by [CdO6] polyhedra. It has a moderate birefringence (Δn = 0.053 at 546 nm), which is measured by experiment and evaluated by first-principles calculations; meanwhile, the source of birefringence is revealed through the response electronic distribution anisotropy method. The UV-vis-NIR diffuse reflectance spectrum indicates that Cd8(BO3)4SiO4 possesses a wide optical transparency range, with a UV cutoff edge at about 254 nm. This work enriches the structure chemistry of borate silicates, and we discussed the possible methods for the exploration and synthesis of novel optical crystals possessing zero-dimensional anionic groups in the borate silicate system.

Supramolecular assembly of blue and green halide perovskites with near-unity photoluminescence

The metal-halide ionic octahedron is the optoelectronic unit for halide perovskites, and a crown ether-assisted supramolecular assembly approach can pack various ionic octahedra into tunable symmetries. In this work, we demonstrate near-unity photoluminescence quantum yield (PLQY) blue and green emission with the supramolecular assembly of hafnium (Hf) and zirconium (Zr) halide octahedral clusters. (18C6@K)2HfBr6 powders showed blue emission with a near-unity PLQY (96.2%), and green emission was also achieved with (18C6@K)2ZrCl4Br2 powders at a PLQY of 82.7%. These highly emissive powders feature facile low-temperature solution-based synthesis conditions and maintain high PLQY in solution-processable semiconductor inks under ambient conditions, and they were used in thin-film displays and emissive three-dimensional-printed architectures that exhibited high spatial resolution.

Antimony Doping Enabled Photoluminescence Quantum Yield Enhancement in 0D Inorganic Bismuth Halide Crystals

Owing to the exterior self-trapped excitons (STEs) with adjustable fluorescence beams, low-dimensional ns2-metal halides have recently received considerable attention in solid-state light-emitting applications. However, the photoluminescence (PL) mechanism in metal halides remains a major challenge in achieving high efficiency and controllable PL properties because the excited-state energy of ns2 conformational ions varies inhomogeneously with their coordination environments. Here, a novel zero-dimensional (0D) lead-free bismuth-based Rb3BiCl6·0.5H2O crystal was reported as a pristine crystal to modulate the optical properties. By doping Sb3+ ions with 5s2 electrons into Rb3BiCl6·0.5H2O crystals, bright orange emission at room temperature was obtained with a photoluminescence quantum yield of 39.7%. Optical characterizations and theoretical studies show that the Sb3+ doping can suppress the strong exciton-phonon coupling, optimize the electronic energy band structure, improve the thermal activation energy, soften the structural lattice of the host crystals, deepen the STE states, and ultimately lead to strong photoluminescence. This work manifests a fruitful manipulation in ripening bismuth-based halides with high-efficiency PL properties, and the PL enhancement mechanisms will guide future research in the exploration of emerging luminescent materials.

Lead Halide Hybrids Templated by Two Coordinating Ligands for Enhanced and Stable Self-Trapped Emission

Lead halide hybrids templated by coordinating ligands are a class of ultrastable broadband self-trapped emitters that overcome the stability problems of conventional ionically bound halide hybrids. However, enhancing their photoluminescence (PL) performances by crystal engineering remains a huge challenge. Herein, for the first time, we have successfully employed the synthetic strategy of two coordinating ligands to synthesize a series of layered lead halide coordination polymers, [Pb6X10]2+(chdc2-)(2,2'-bpy)2 (X = Cl/Br, chdc = trans-1,4-cyclohexanedicarboxylate), which involves chdc as a pillaring strut and 2,2'-bpy as a chelating ligand. The introduction of a chelating ligand (2,2'-bpy) enables stronger lattice distortion of lead halide layers and enhances UV-light absorption and ligand-to-metal charge transfer (LMCT) process, thereby achieving a substantial improvement of photoluminescence quantum yields (PLQYs) over the control layered materials templated by a single chdc ligand. This class of lead halide hybrids templated by two coordinating ligands exhibit chemical "inertness" after being subjected to various chemical conditions for 48 h, maintaining stable and efficient broadband emission. Density functional theory calculations and femtosecond transient absorption spectra (fs-TA) demonstrate that the broadband emission originates from self-trapped excitons, which are more populated with the LMCT contribution from 2,2'-bpy. This study shows a rational strategy at the molecular level to modulate the photophysical properties of chemically robust lead halide coordination polymers.

Antimony-Triggered Tunable White Light Emission in Lead-Free Zero-Dimensional Indium Halide with Ultrastable CCT of White Light Emitting Diodes

A highly efficient and easily tunable luminescence is significant for solid-state luminescent (SSL) materials. However, achieving a photoluminescence quantum yield (PLQY) close to unity and tuning the emission remain challenging tasks. Metal doping strategies enable resolution of these issues. Herein, we report the preparation of a novel organic-inorganic lead-free indium-based metal halide hybrid (MP)3InCl6•EtOH (MP = C4H10ON) with a typical zero-dimension structure. When excited at 320 nm, (MP)3InCl6•EtOH exhibits a dual emission band at 420 and 600 nm, which originates from the organic cation [MP] and the [InCl6]3- octahedral unit. The photoluminescence can be significantly enhanced through Sb3+ doping, resulting in an increase in PLQY from 0.78% to near unity. Multiple emission color tunings have been achieved by regulating the Sb doping level and the radiation wavelength, resulting in a change in emission color from blue → white → orange. Optical characterizations reveal that the significantly enhanced emission centered at 600 nm can be attributed to more efficient absorption, closely associated with an additional 1S0 → 3P1 transition in the inorganic octahedron [In(Sb)Cl6]3- due to Sb3+ doping. With its excellent optical performance, a white light emitting diode (WLED) has been successfully fabricated by coating the mixture of (MP)3InCl6•EtOH:15%Sb3+ with blue phosphor BaMgAl10O17:Eu2+ onto a UV LED chip. The WLED device exhibits perfect white light emission with regard to the International Commission on Illumination (CIE) coordinates of (0.36, 0.34). Significantly, the WLED device maintains a stable correlated color temperature (CCT) range of 4119-4393 K and CIE coordinates (x: 0.37-0.34, y: 0.35-0.33) as the driven current varies from 20 to 200 mA, demonstrating outstanding stability across different power levels. This work not only presents a novel system for achieving remarkably enhanced luminescent performance and tuning emission bands in 0D metal halides but also represents a significant step toward achieving resistance to color drifting for stable WLEDs.

Zero-Dimensional Hybrid Antimony Chloride with Near-Unity Broad-Band Orange-Red Emission toward Solid-State Lighting

Zero-dimensional (0D) hybrid metal halides are attractive owing to their distinctive structure as well as photoluminescence (PL) characteristics. To discover 0D hybrid metal halides with high photoluminescence quantum yield and good stability is of great significance for white light-emitting diodes (LEDs). Herein, a novel hybrid antimony chloride (CTP)2SbCl5 is synthesized, which shows a bright broad-band orange-red emission peaking at 620 nm under the low energy excitation (365 nm), achieving an excellent photoluminescence quantum yield of 96.8%. In addition, (CTP)2SbCl5 shows an additional emission peaking at 470 nm when excited at high energy (323 nm). PL spectra and density functional theory results demonstrate that the observed dual-band emission originates from the singlet and triplet self-trapped excitons confined in isolated [SbCl5]2- square pyramids. Moreover, (CTP)2SbCl5 presents relatively superior air stability, and the PL intensity still maintains 78% of the initial PL intensity when exposed to the air for above 2 weeks. Benefiting from high-efficiency PL emission and good stability of (CTP)2SbCl5, a stable warm white LED device with a 92.3% color rendering index was prepared by coating blue phosphor BaMgAl10O17:Eu2+, green (Sr,Ba)2SiO4:Eu2+, and orange-red (CTP)2SbCl5 on a 365 nm LED chip. This work provides an efficient luminescent material and also demonstrates the potential application of 0D hybrid antimony chloride in solid-state lighting.

Pressure-Regulated Excitonic Transitions in Emergent Metal Halides

ConspectusEmergent metal halides are generating significant interest as novel optical materials, and their diverse applications have brought them to the spotlight of chemistry and material science. The optical properties of semiconducting metal halides are fundamentally dominated by excitonic transitions, which refer to the complex processes of excitonic formation, self-trapping, as well as subsequent transitions of intersystem crossing (ISC) and internal conversion (IC). In this regard, high pressure has recently opened a new research dimension to regulate excitonic transitions in metal halides via continuous structural modulations, to understand the intriguing excitonic emissions from a new perspective. In this Account, we aim to rationalize the fundamental strategy for modulating and optimizing the optical properties of metal halides based on delicate exciton regulation via high-pressure method. First, the band gaps of metal halides that are directly related to the efficiency of excitonic formation, are accurately modulated through contraction, distortion, and destruction of metal-halogen polyhedra under compression. Then, considerable enhancement of self-trapped exciton emission is demonstrated by inducing proper polyhedral distortions via high-pressure method. Furthermore, the emission energy of metal halides could also be controllably and widely tuned through pressure-modulated excitonic transitions. Upon compression on different metal halides, excitonic IC is promoted with sufficient polyhedral distortions, and different sets of ISC could also be achieved. In the end, we emphasize the significance of high-pressure investigations in uncovering the complex excitonic transitions in emergent metal halides and predicting novel metal halides with desired optical properties at ambient conditions. It is expected that these discussions could inspire researchers in different fields to perform interdisciplinary high-pressure studies on novel functional materials.

Dimension Tuning of All-Inorganic Ag-Based Metal Halides by Solvent Engineering

Dimension growth of metal halides is important for its properties and applications. However, such dimension control of the metal halides is rarely reported in the literature and the growth mechanism is not clear yet. A minute difference of solvent properties can tremendously alter the process of nucleation and growth of crystals. Herein, an intriguing phenomenon of dimension tuning for Ag-based metal halides is reported. The 1D Cs2 AgCl3 crystals can be obtained in pure DMF while the 2D CsAgCl2 crystals are obtained in pure DMSO. Both exhibit bright yellow emission, which are derived from self-trapping excitons (STEs). The photoluminescence quantum yield (PLQY) of Cs2 AgCl3 (1D) and CsAgCl2 (2D) are 28.46 % and 20.61 %, respectively. In order to understand the mechanism of the dimension change, additional solvents (N,N-dimethylacetamide, DMAC, 1,3-Dimethyl-Tetrahydropyrimidin-2(1H)-one, DMPU) are also selected to process the precursor for crystal growth. By comparing the functional group, dielectric constant, and donor number among the four solvents, we find the donor number plays the predominant role in nucleation process for Cs2 AgCl3 and CsAgCl2 . This research reveals the relationship between coordination ability of the solvent and the dimension of metal halides.

Optical enhancement of highly efficient organic-inorganic oxyfluoride red phosphors via the cation co-doping strategy

Herein, a new organic cationic matrix [N(CH3)4]3MoO3F3 suitable for Mn4+ doping was constructed. Due to the large steric hindrance of N[CH3]4+ (TMA), charge compensation defects can be effectively prevented in the heterovalent Mn4+-doping process, and a high IQE (91.05%) was obtained. Through the cation co-doping strategy, Mg2+/Zn2+/Li+ cations were introduced into the Mo6+ cationic site, which improved the crystallinity of the matrix and reduced energy losses, so as to improve luminescence intensity, QE, thermal stability, water stability and other spectral properties. Meanwhile, [N(CH3)4]2TiF6:Mn4+ phosphors with the same TMA organic cation and equivalent Mn4+ doping were synthesized for comparison, and the effects of the Mg2+ cation co-doping strategy on the spectral properties of phosphors with different matrix types (fluoride/oxyfluoride) and substitution types (equivalent/non-equivalent) were analyzed. These findings provide the basis for the preparation of new luminescent materials. Furthermore, according to the optical properties exhibited by these phosphors, they are packaged into WLED devices with excellent photoelectric properties, which are suitable for indoor lighting and display fields.

Manipulating Lone-Pair-Driven Luminescence in 0D Tin Halides by Pressure-Tuned Stereochemical Activity from Static to Dynamic

The excellent luminescence properties and structural dynamics driven by the stereoactivity of the lone pair in a variety of low-dimensional ns2 metal halides have attracted growing investigations for optoelectronic applications. However, the structural and photophysical aspects of the excited state associated with the lone pair expression are currently open questions. Herein, zero-dimensional Sn-based halides with static stereoactive 5 s2 lone pairs are selected as a model system to understand the correlations between the distinctive lone pair expression and the excited-state structural relaxation and charge carrier dynamics by continuous lattice manipulation. Lattice compression drives 5 s2 lone pair active switching and self-trapped exciton (STE) redistribution by suppressing excited-state structural deformation of the isolated SnBr4 2- units. Our results demonstrate that the static expression of the 5 s2 lone pair results in a red broadband triplet STE emission with a large Stokes shift, while its dynamic expression creates a sky-blue narrowband emission dominated by the radiative recombination of singlet STEs. Our findings and the photophysical mechanism proposed highlight the stereochemical effects of lone pair expression in controlling light emission properties and offer constructive guidelines for tuning the optoelectronic properties in diverse ns2 metal halides.

Breaking the Inherent Interarrangement of [B3O6] Clusters for Nonlinear Optics with Orbital Hybridization Enhancement

The [B3O6] group as a prime functional unit provides borates with intrinsic properties that are modified by coordination to cations. Inherent [B3O6] cluster structures in borates exclusively made of them have a near-plane configuration, with more than 90% of them having a maximum dihedral angle of zero and the remaining ones being less than 13°. Although such an inherent configuration can produce considerable birefringence for good phase-matching ability, this is not conducive to obtaining high conversion efficiency and beam quality due to the walk-off effects in the nonlinear optical process. In this article, two new borate halides Ca2B3O6X (X = Cl and Br) were reported, in which the confinement effects of distorted halogen-centered secondary building blocks compress the existence space of [B3O6] primitives, resulting in the nonparallel arrangement between [B3O6] clusters in this series. Both compounds show large second harmonic generation effects, and more importantly, the broken inherent interarrangement of [B3O6] clusters makes them a moderate birefringence and small walk-off angle. Their moderate birefringence is due to the large angular alignment between [B3O6] clusters, resulting from the orbital hybridization between the Ca s and the O p orbitals of the terminal O atoms on [B3O6] clusters. Our model supports this viewpoint and offers guidelines for rearranging [B3O6] clusters' arrangements in borates.

In situ recrystallization of zero-dimensional hybrid metal halide glass-ceramics toward improved scintillation performance

Zero-dimensional (0D) hybrid metal halide (HMH) glasses are emerging luminescent materials and have gained attention due to their transparent character and ease of processing. However, the weakening of photoluminescence quantum efficiency from crystal to glass phases poses limitations for photonics applications. Here we develop high-performance glass-ceramic (G-C) scintillators via in situ recrystallization from 0D HMH glass counterparts composed of distinct organic cations and inorganic anions. The G-C scintillators maintain excellent transparency and exhibit nearly 10-fold higher light yields and lower detection limits than those of glassy phases. The general in situ recrystallization within the glass component by a facile heat treatment is analyzed via combined experimental elaboration and structural/spectral characterization. Our results on the development of G-Cs can initiate more exploration on the phase transformation engineering in 0D HMHs, and therefore make them highly promising for large-area scintillation screen applications.

Solution-Obtained (NH4)3In0.95Sb0.05Cl6 with High External Photoluminescence Quantum Yield and Excellent Antiquenching Properties

The efficient broad-band emission from low-dimensional metal halides has garnered significant interest. However, most of these materials exhibit poor stability at the operating temperature of light-emitting diodes. In this study, using the solution method (temperature lower than 90 °C), a new compound (NH4)3In0.95Sb0.05Cl6 was obtained with the structure in the Pnma space group featuring unit-cell parameters of a = 12.3871(4) Å, b = 24.9895(9) Å, and c = 7.7844(3) Å. (NH4)3In0.95Sb0.05Cl6 can be prepared by doping (NH4)2InCl5·H2O when the Sb3+ feeding ratio is in the range of 30-80%. Thermal analysis reveals that (NH4)3In0.95Sb0.05Cl6 is stable up to 320 °C. (NH4)3In0.95Sb0.05Cl6 exhibits broad-band yellow-white emission with extremely high internal and external photoluminescence quantum yields of 93 and 77%, respectively. Interestingly, (NH4)3In0.95Sb0.05Cl6 displays remarkable resistance to thermal quenching, retaining 83% of its initial photoluminescence intensity at 80 °C. A white light-emitting diode is fabricated by combining (NH4)3In0.95Sb0.05Cl6 with a commercial phosphor, and a high color rendering of 92.8 was obtained. This work presents an environmentally friendly, efficient, stable UV-excited broad-band emission material for potential solid-state lighting applications.

Water-Molecule-Induced Reversible Fluorescence in a One-Dimensional Mn-Based Hybrid Halide for Anticounterfeiting and Digital Encryption-Decryption

Hybrid metal halides with reversible transformation of structure and luminescence properties have attracted significant attention in anticounterfeiting. However, their long transition time and slow response rate may hinder the rapid identification of confidential information. Here, a one-dimensional hybrid manganese-based halide, i.e., (C5H11N3)MnCl2Br2·H2O, is prepared and demonstrates the phenomenon of water-molecule-induced reversible photoluminescence transformation. Heating for <40 s induces a dynamic transfer of red-emissive (C5H11N3)MnCl2Br2·H2O to green-emissive (C5H11N3)MnCl2Br2. In addition, the green emission can gradually revert to red emission during a cooling process in a moist environment, demonstrating excellent reversibility. It is found that the water molecule acts as an external stimulus to realize the reversible transition between red and green emission, which also exhibits remarkable stability during repeated cycles. Furthermore, with the assistance of heating and cooling, a complex digital encryption-decryption and an optical "AND" logical gate are achieved, facilitating the development of anticounterfeiting information security.

Achieving Highly Efficient Warm-White Light Emission in All-Inorganic Copper-Silver Halides via Structural Regulation

Single-component metal halides with white light emission are highly attractive for solid-state lighting applications, but it is still challenging to develop all-inorganic lead-free metal halides with high white-light emission efficiency. Herein, by rationally introducing silver (Ag) into zero-dimensional (0D) Cs3 Cu2 Br5 as new structural building unit, a one-dimensional (1D) bimetallic halide Cs6 Cu3 AgBr10 is designed that emits strong warm-white light with an impressive photoluminescence quantum yield (PLQY) of 94.5% and excellent stability. This structural transformation lowers the conduction band minimum while maintaining the localized nature of the valence band maximum, which is crucial in expanding the excitation spectrum and obtaining efficient self-trapped excitons (STEs) emission simultaneously. Detailed spectroscopy studies reveal that the white-light originates from triplet STEs emission, which can be remarkably improved by weakening the strong electron-phonon coupling and thus suppressing phonon-induced non-radiative processes. Moreover, the interesting temperature-dependent emission behavior, together with self-absorption-free property, make Cs6 Cu3 AgBr10 as sensitive luminescent thermometer and high-performance X-ray scintillator, respectively. These findings demonstrate a general approach to achieving effective single-component white-light emitters based on lead-free, all-inorganic metal halides, thereby opening up a new avenue to explore their versatile applications such as lighting, temperature detection and X-ray imaging.

Intense Hydrochromic Photon Upconversion from Lead-Free 0D Metal Halides For Water Detection and Information Encryption

Hydrochromic materials that change their luminescence color upon exposure to moisture have attracted considerable attention owing to their applications in sensing and information encryption. However, the existing materials lack high hydrochromic response and color tunability. This study reports the development of a new and bright 0D Cs3 GdCl6 metal halide as the host for hydrochromic photon upconversion in the form of polycrystals (PCs) and nanocrystals. Lanthanides co-doped cesium gadolinium chloride metal halides exhibit upconversion luminescence (UCL) in the visible-infrared region upon 980 nm laser excitation. In particular, PCs co-doped with Yb3+ and Er3+ exhibit hydrochromic UCL color change from green to red. These hydrochromic properties are quantitatively confirmed through the sensitive detection of water in tetrahydrofuran solvent via UCL color changes. This water-sensing probe exhibits excellent repeatability and is particularly suitable for real-time and long-term water monitoring. Furthermore, the hydrochromic UCL property is exploited for stimuli-responsive information encryption via cyphertexts. These findings will pave the way for the development of new hydrochromic upconverting materials for emerging applications, such as noncontact sensors, anti-counterfeiting, and information encryption.

Ultralow-loss Optical Waveguides through Balancing Deep-Blue TADF and Orange Room Temperature Phosphorescence in Hybrid Antimony Halide Microstructures

Harnessing the potential of thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP) is crucial for developing light-emitting diodes (LEDs), lasers, sensors, and many others. However, effective strategies in this domain are still relatively scarce. This study presents a new approach to achieving highly efficient deep-blue TADF (with a PLQY of 25 %) and low-energy orange RTP (with a PLQY of 90 %) through the fabrication of lead-free hybrid halides. This new class of monomeric and dimeric 0D antimony halides can be facilely synthesized using a bottom-up solution process, requiring only a few seconds to minutes, which offer exceptional stability and nontoxicity. By leveraging the highly adaptable molecular arrangement and crystal packing modes, the hybrid antimony halides demonstrate the ability to self-assemble into regular 1D microrod and 2D microplate morphologies. This self-assembly is facilitated by multiple non-covalent interactions between the inorganic cores and organic shells. Notably, these microstructures exhibit outstanding polarized luminescence and function as low-dimensional optical waveguides with remarkably low optical-loss coefficients. Therefore, this work not only presents a pioneering demonstration of deep-blue TADF in hybrid antimony halides, but also introduces 1D and 2D micro/nanostructures that hold promising potential for applications in white LEDs and low-dimensional photonic systems.

Crystal-glass phase transition enabling reversible fluorescence switching in zero-dimensional antimony halides

Crystal-glass phase transition in luminescent metal halides provides unique opportunities to tune the photoluminescence. Here we report four zero-dimensional Sb-based halide glasses featuring reversible phase transition upon heating and acetone triggering conditions, along with modulated luminescence properties. Benefiting from the fluorescence switching, information encryption and anti-counterfeiting applications are achieved.

Integrating Achiral and Chiral Organic Ligands in Zero-Dimensional Hybrid Metal Halides to Boost Circularly Polarized Luminescence

Chiral zero-dimensional hybrid metal halides (0D HMHs) could combine excellent optical properties and chirality, making them promising for circularly polarized luminescence (CPL). However, chiral 0D HMHs with efficient CPL have been rarely reported. Here, we propose an efficient strategy to achieve simultaneously high photoluminescence quantum yield (PLQY) and large dissymmetry factor (glum ), by integrating achiral and chiral ligands into 0D HMHs. Specifically, three pairs of chiral 0D hybrid indium-antimony chlorides are synthesized by combing achiral guanidine with three types of chiral methylbenzylammonium-based derivatives as the organic cations. These chiral 0D HMHs exhibit near-unity PLQY and large glum values up to around ±1×10-2 . The achiral guanidine ligand is not only essential to crystallize these hybrid indium-antimony chlorides to achieve near-unity PLQYs, but also greatly enhances the chirality induction from organic ligands to inorganic units in these 0D HMHs. Furthermore, the choice of different chiral ligands can modify the strength of hydrogen bonding interactions in these 0D HMHs, to maximize their glum values. Overall, this study provides a robust way to realize efficient CPL in chiral HMHs, expanding their applications in chiroptical fields.

Anomalous Charge Transfer from Organic Ligands to Metal Halides in Zero-Dimensional [(C6 H5 )4 P]2 SbCl5 Enabled by Pressure-Induced Lone Pair-π Interaction

Low-dimensional (low-D) organic metal halide hybrids (OMHHs) have emerged as fascinating candidates for optoelectronics due to their integrated properties from both organic and inorganic components. However, for most of low-D OMHHs, especially the zero-D (0D) compounds, the inferior electronic coupling between organic ligands and inorganic metal halides prevents efficient charge transfer at the hybrid interfaces and thus limits their further tunability of optical and electronic properties. Here, using pressure to regulate the interfacial interactions, efficient charge transfer from organic ligands to metal halides is achieved, which leads to a near-unity photoluminescence quantum yield (PLQY) at around 6.0 GPa in a 0D OMHH, [(C6 H5 )4 P]2 SbCl5 . In situ experimental characterizations and theoretical simulations reveal that the pressure-induced electronic coupling between the lone-pair electrons of Sb3+ and the π electrons of benzene ring (lp-π interaction) serves as an unexpected "bridge" for the charge transfer. Our work opens a versatile strategy for the new materials design by manipulating the lp-π interactions in organic-inorganic hybrid systems.

Multi-Mode Photoluminescence Regulation in a Zero-Dimensional Organic-Inorganic Hybrid Metal Halide Perovskite─[(CH3)4N]2SnCl6

Metal ion-doped zero-dimensional halide perovskites provide good platforms to generate broadband emission and explore the fundamental dynamics of emission regulations. Recently, Sb3+-doped zero-dimensional halide perovskites have attracted considerable attention for the high quantum yield of yellow emission; however, the triplet state recombination is activated and the singlet state emission is usually absent. Herein, we fabricate an Sb3+-doped zero-dimensional [(CH3)4N]2SnCl6 perovskite that can induce singlet and triplet emission. Density functional theory calculation shows that there are some overlaps between the highest occupied molecular orbitals and the lowest unoccupied molecular orbitals, which may induce a large energy separation between the lowest excited triplet states (T1) and the lowest excited singlet states (S1) [ΔE(S1 - T1)], impeding all the carriers' transfer from the singlet state to the triplet state. As a result, the reserved singlet emission together with the triplet emission can be regulated by excitation wavelength in situ. In addition, different Bi3+ ratios are co-doped into Sb3+@[(CH3)4N]2SnCl6, resulting in a photoluminescence ex situ regulation. Single-phase white light LED and optical anti-counterfeiting are developed further.

Designing a Dimension Reduced Hybrid Perovskite with Robust Large Birefringence by Expanding Cationic π-Delocation

It is in great demand to discover new materials with large birefringence for the miniaturization of optical communication devices. In this work, a new one-dimensional hybrid halide perovskite, (C6 N10 H8 )Pb2 Br6 , is obtained successfully through structural design of dimension reduction from the notable three-dimensional halide perovskite CsPbBr3 . Remarkably, (C6 N10 H8 )Pb2 Br6 exhibits a significantly enhanced birefringence of ∆n = 0.42@550 nm, which is the largest among halide perovskites so far. Furthermore, its birefringence performance is robust in a wide temperature range of 300-440 K. Theoretical calculations reveal that this outstanding birefringence results from the synergistic effect of [PbBr6 ]4- octahedra and [C6 N10 H8 ]2+ cations with expanding π-delocation. According to further structural analyses, the structural dimension reduction cooperating with the increase of [PbBr6 ]4- octahedral distortion leads to the enhanced birefringence. This work uncovers the great promise of hybrid halide perovskites as robust birefringent crystals in future optical communication and would shed useful insights on the design and synthesis of new birefringent crystals.

Theoretical and Experimental Advances in High-Pressure Behaviors of Nanoparticles

Using compressive mechanical forces, such as pressure, to induce crystallographic phase transitions and mesostructural changes while modulating material properties in nanoparticles (NPs) is a unique way to discover new phase behaviors, create novel nanostructures, and study emerging properties that are difficult to achieve under conventional conditions. In recent decades, NPs of a plethora of chemical compositions, sizes, shapes, surface ligands, and self-assembled mesostructures have been studied under pressure by in-situ scattering and/or spectroscopy techniques. As a result, the fundamental knowledge of pressure-structure-property relationships has been significantly improved, leading to a better understanding of the design guidelines for nanomaterial synthesis. In the present review, we discuss experimental progress in NP high-pressure research conducted primarily over roughly the past four years on semiconductor NPs, metal and metal oxide NPs, and perovskite NPs. We focus on the pressure-induced behaviors of NPs at both the atomic- and mesoscales, inorganic NP property changes upon compression, and the structural and property transitions of perovskite NPs under pressure. We further discuss in depth progress on molecular modeling, including simulations of ligand behavior, phase-change chalcogenides, layered transition metal dichalcogenides, boron nitride, and inorganic and hybrid organic-inorganic perovskites NPs. These models now provide both mechanistic explanations of experimental observations and predictive guidelines for future experimental design. We conclude with a summary and our insights on future directions for exploration of nanomaterial phase transition, coupling, growth, and nanoelectronic and photonic properties.

Zero-dimensional organic-inorganic hybrid manganese bromide with coexistence of dielectric-thermal double switches and efficient photoluminescence

Zero-dimensional (0D) hybrid metal halides have attracted much attention due to their rich composition, excellent optical stability, large exciton binding energy, etc. Photoelectric switchable multifunctional materials can integrate multiple physical properties (e.g., ferroelectricity, photoluminescence, magnetic, etc.) into one device and are widely used in many fields such as smart switches, sensors, etc. However, multifunctional materials with thermal energy storage, stimulant dielectric response, and light-emitting properties are rarely reported. Here, we synthesized a new organic-inorganic hybrid metal halide single crystal [TEMA]2MnBr4 (1) (TEMA+ = triethylmethylammonium). Compound 1 undergoes a reversible phase transition at a high temperature of 344/316 K, having a large thermal hysteresis of 28 K and exhibits high stability dielectric switching characteristics near the phase transition temperature. The single crystal exhibits green emission at 513 nm under UV excitation, originating from the 4T1g(G) → 6A1g(S) transition of Mn2+ ions. Excitingly, this single crystal's photoluminescence quantum yield (PLQY) is as high as 80.78%. This work provides a strategy for the development of organic-inorganic hybrid optoelectronic multifunctional materials with high-efficient light emission and switchable dielectric properties.

Achiral phosphonium induced remarkable circular polarized luminescence in a chiral cadmium(II) halide perovskite material

Circular polarized luminescence (CPL) sensitive two-dimensional organic inorganic halide perovskites have versatile applications in optical displays, encrypted transmission and quantum communications. Here, a new chiral hybrid [MePh3P]2CdCl4 (PCC) single crystal (SC) is synthesized using an achiral phosphonium cation by a solvent evaporation process at room temperature (rt). SC x-ray study reveals a non-centrosymmetric point group 23, with 21-screw optical axes providing a chiral Sohncke space group. Hirshfeld surface analysis suggests long-range H-bonding and ionic interactions (~ 3-9 kJ mol-1) and short-range Van der Waals and dispersion interactions (∼0.4-4 kJ mol-1). Both the PCC thin films and SCs exhibit prominent circular dichroism (CD) and remarkably superior CPL activity at rt (|gCD| ≈ 5 × 10-3 and |glum| ≈ 4.3 × 10-2).

Synthesis of Layered Lead-Free Perovskite Nanocrystals with Precise Size and Shape Control and Their Photocatalytic Activity

Halide perovskites have attracted enormous attention due to their potential applications in optoelectronics and photocatalysis. However, concerns over their instability, toxicity, and unsatisfactory efficiency have necessitated the development of lead-free all-inorganic halide perovskites. A major challenge in designing efficient halide perovskites for practical applications is the lack of effective methods for producing nanocrystals with precise size and shape control. In this work, a layered perovskite, Cs4ZnSb2Cl12 (CZS), is found from calculations to exhibit size- and facet-dependent optoelectronic properties in the nanoscale, and thus, a colloidal method is used to synthesize the CZS nanoparticles with size-tunable morphologies: zero- (nanodots), one- (nanowires and nanorods), two- (nanoplates), and three-dimensional (nanopolyhedra). The growth kinetics of the CZS nanostructures, along with the effects of surface ligands, reaction temperature, and time were investigated. The optoelectronic properties of the nanocrystals varied with size due to quantum confinement effects and with shape due to anisotropy within the crystals and the exposure of specific facets. These properties could be modulated to enhance the visible-light photocatalytic performance for toluene oxidation. In particular, the 9.7 nm CZS nanoplates displayed a toluene to benzaldehyde conversion rate of 1893 μmol g-1 h-1 (95% selectivity), 500 times higher than the bulk synthesized CZS, and comparable with the reported photocatalysts. This study demonstrates the integration of theoretical calculations and synthesis, revealing an approach to the design and fabrication of novel, high-performance colloidal perovskite nanocrystals for optoelectronic and photocatalytic applications.

Boosting the Self-Trapped Exciton Emission in Cs4SnBr6 Zero-Dimensional Perovskite via Rapid Heat Treatment

Zero-dimensional (0D) tin halide perovskites feature extraordinary properties, such as broadband emission, high photoluminescence quantum yield, and self-absorption-free characteristics. The innovation of synthesis approaches for high-quality 0D tin halide perovskites has facilitated the flourishing development of perovskite-based optoelectronic devices in recent years. However, discovering an effective strategy to further enhance their emission efficiency remains a considerable challenge. Herein, we report a unique strategy employing rapid heat treatment to attain efficient self-trapped exciton (STE) emission in Cs4SnBr6 zero-dimensional perovskite. Compared to the pristine Cs4SnBr6, rapid thermal treatment (RTT) at 200 °C for a duration of 120 s results in an augmented STE emission with the photoluminescence (PL) quantum yield rising from an initial 50.1% to a substantial 64.7%. Temperature-dependent PL spectra analysis, Raman spectra, and PL decay traces reveal that the PL improvement is attributed to the appropriate electron-phonon coupling as well as the increased binding energies of STEs induced by the RTT. Our findings open up a new avenue for efficient luminescent 0D tin-halide perovskites toward the development of efficient optoelectronic devices based on 0D perovskites.

Green and Red Photoluminescent Manganese Bromides with Aminomethylpyridine Isomers

Two positional isomers, 4-amino-3-methylpyridine and 3-amino-5-methylpyridine, produce 4-amino-3-methylpyridinium and 5-methylpyridin-3-aminium, respectively, under acidic conditions. The two protonated isomers create different hydrogen bonding networks, resulting in different coordination environments of the [MnX₄]^2- unit embedded in molecular compounds such as 4-amino-3-methylpyridinium manganese bromide, [(C₆H₉N₂)₂MnBr₄] and 5-methylpyridin-3-aminium manganese bromide, [(C₆H₉N₂)₄MnBr₄(H₂O)·(MnBr₄)]. Both compounds can be prepared using the slow evaporation method or mechanochemical synthetic procedures. Single-crystal structure analysis of [(C₆H₉N₂)₂MnBr₄] and [(C₆H₉N₂)₄MnBr₄(H₂O)·(MnBr₄)] revealed different manganese halide units, including tetrahedral and tetrahedral with distorted trigonal bipyramidal structures, which emit photoluminescence in the green (527 nm) and red (607 nm) regions, respectively. Electronic structure calculations were conducted to support the validity and interpretation of the UV-vis and photoluminescence (PL) spectral data. Thin films deposited using the [(C₆H₉N₂)₂MnBr₄] precursor also exhibit PL properties. The diverse pseudo-three-dimensional networks can be constructed by using positional isomers with different hydrogen bonding pathways and π-π stacking of organic units, in which the design strategy successfully enables the tuning of various optical properties.

Improving X-ray Scintillating Merits of Zero-Dimensional Organic-Manganese(II) Halide Hybrids via Enhancing the Ligand Polarizability for High-Resolution Imaging

Luminescent metal halides have been exploited as a new class of X-ray scintillators for security checks, nondestructive inspection, and medical imaging. However, the charge traps and hydrolysis vulnerability are always detrimental to the three-dimensional ionic structural scintillators. Here, the two zero-dimensional organic-manganese(II) halide coordination complexes 1-Cl and 2-Br were synthesized for improvements in X-ray scintillation. The introduction of a polarized phosphine oxide can help to increase the stabilities, especially the self-absorption-free merits of these Mn-based hybrids. The X-ray dosage rate detection limits reached up to 3.90 and 0.81 μGyair/s for 1-Cl and 2-Br, respectively, superior to the medical diagnostic standard of 5.50 μGyair/s. The fabricated scintillation films were applied to radioactive imaging with high spatial resolutions of 8.0 and 10.0 lp/mm, respectively, holding promise for use in diagnostic X-ray medical imaging.

Photophysical studies for Cu(i)-based halides: broad excitation bands and highly efficient single-component warm white-light-emitting diodes

Designing and synthesizing cuprous halide phosphors unifying efficient low-energy emission and a broad excitation band is still a great challenge. Herein, by rational component design, three novel Cu(i)-based metal halides, DPCu₄X₆ [DP = (C₆H₁₀N₂)₄(H₂PO₂)₆; X = Cl, Br, I], were synthesized by reacting p-phenylenediamine with cuprous halide (CuX), and they show similar structures, consisting of isolated [Cu₄X₆]^2- units separated by organic layers. Photophysical studies uncover that the highly localized excitons and rigid environment give rise to highly efficient yellow-orange photoluminescence in all compounds with the excitation band spanning from 240 to 450 nm. The bright PL in DPCu₄X₆ (X = Cl, Br) originates from self-trapped excitons due to the strong electron-phonon coupling. Intriguingly, DPCu₄I₆ features a dual-band emissive characteristic, attributed to the synergistic effect of halide/metal-to-ligand charge-transfer (X/MLCT) and triplet cluster-centered (³CC) excited states. Benefiting from the broadband excitation, a high-performance white-light emitting diode (WLED) with a high color rendering index of 85.1 was achieved using single-component DPCu₄I₆ phosphor. This work not only unveils the role of halogens in the photophysical processes of cuprous halides, but also provides new design principles for high-performance single-component WLEDs.

Self-assembly formation of CuI hybrid micron phosphors with tunable emission for multifunctional applications

Low-cost and eco-friendly CuI hybrid compounds with various structures have recently attracted increasing attention due to their excellent optical properties and promising phosphor applications. However, the poor solubility and solution processability of bulk powders with agglomerated particle limited their practical applications greatly. In this work, we reported the self-assembly formation of CuI hybrid micron phosphors via the aqueous PVP micelle-assisted assembly route. Seven CuI hybrid micron phosphors with the emission from blue 450 nm to red 636 nm have been successfully synthesized. Among them, CuI-pyridine hybrid micron phosphors can be obtained via the reaction of CuI with various pyridines. PVP limits the size growth of the phosphors efficiently and it also plays an important role in controlling the distinct crystal phase formation. Whereas, micron phosphors based on bidentate ligands including 2-propylpyrazine, 5-bromopyrimidine or 4,4'-bipyridine need to be prepared via ligand exchange reaction. The micron phosphors present excellent stability in water and can be dispersed in the aqueous solution of PVP or PVA to form homogenous luminescent composites. The luminescent composites based on PVP are easy to use for fabricating anti-counterfeiting patterns via brush-painting or screen-printing. On the other hand, PVA composites can be applied for preparing free standing monochromatic or multichromatic emitting films as color convertor for display backlight. The PVA composites also exhibit the promising phosphor application for light-emitting diode (LED). Especially, the white LED can be directly realized via optimizing the mixing ratio of blue and orange phosphors.

Insight into efficient photoluminescence regulation mechanism by lattice distortion and Mn2+ doping in organic-inorganic hybrid perovskites

The space configurations of organic ammonium cations play a vital role in indirectly revealing the relationship between the structures and photoluminescence properties. Structural transformation induced tunability of the photophysical properties has rarely been reported. In this work, two organic-inorganic halide perovskites with different octahedral distortions were synthesized to explore the relationships between "steric effect" of organic cations and photoluminescence properties. The broadband emission of (DETA)PbBr₅·H₂O with high octahedral distortion is attributed to self-trapped excitons and trap states, whereas smaller steric hindrance ammonium cation 1,4-butanediamine form a 2D layered perovskite with narrowband emission due to free excitons. More importantly, the photoactive metal ions Mn²⁺ doping strategy gives rise to tunable broadband light emission from weak to strong orange emission with higher PLQY up to 20.96 % and 12.90% in 0D (DETA)Pb_0.2Mn_0.8Br₅·H₂O and 2D (BDA)Pb_0.8Mn_0.2Br₄ respectively. Combined with time-correlated single photon counting and photoluminescence spectra, Mn-doped perovskites reveal energy transfer from host to Mn²⁺ characteristic energy level (⁴T₁-⁶A₁). Importantly, defect states are reduced by doping manganese ions in (DETA)PbBr₅·H₂O to enhance photoluminescence intensity. This work sheds light on the mechanism of defect-related emission and provides a successful strategy for designing novel and adjustable materials.

Solution-Processed Hybrid Europium (II) Iodide Scintillator for Sensitive X-Ray Detection

Lead halide perovskite nanocrystals have recently demonstrated great potential as x-ray scintillators, yet they still suffer toxicity issues, inferior light yield (LY) caused by severe self-absorption. Nontoxic bivalent europium ions (Eu2+) with intrinsically efficient and self-absorption-free d-f transition are a prospective replacement for the toxic Pb2+. Here, we demonstrated solution-processed organic-inorganic hybrid halide BA10EuI12 (BA denotes C4H9NH4+) single crystals for the first time. BA10EuI12 was crystallized in a monoclinic space group of P21/c, with photoactive sites of [EuI6]4- octahedra isolated by BA+ cations, which exhibited high photoluminescence quantum yield of 72.5% and large Stokes shift of 97 nm. These properties enable an appreciable LY value of 79.6% of LYSO (equivalent to ~27,000 photons per MeV) for BA10EuI12. Moreover, BA10EuI12 shows a short excited-state lifetime (151 ns) due to the parity-allowed d-f transition, which boosts the potential of BA10EuI12 for use in real-time dynamic imaging and computer tomography applications. In addition, BA10EuI12 demonstrates a decent linear scintillation response ranging from 9.21 μGyair s-1 to 145 μGyair s-1 and a detection limit as low as 5.83 nGyair s-1. The x-ray imaging measurement was performed using BA10EuI12 polystyrene (PS) composite film as a scintillation screen, which exhibited clear images of objects under x-ray irradiation. The spatial resolution was determined to be 8.95 lp mm-1 at modulation transfer function = 0.2 for BA10EuI12/PS composite scintillation screen. We anticipate that this work will stimulate the exploration of d-f transition lanthanide metal halides for sensitive x-ray scintillators.

Syntheses, Structures, and Photoluminescence of Copper-Based Halides

Copper-based halides have been found to be a new family of lead-free materials with high stability and superior optoelectrical properties. In this work, we report the photoluminescence of the known (C₈H₁₄N₂)CuBr₃ and the discovery of three new compounds, (C₈H₁₄N₂)CuCl₃, (C₈H₁₄N₂)CuCl₃·H₂O, and (C₈H₁₄N₂)CuI₃, which all exhibit efficient light emissions. All these compounds have monoclinic structures with the same space group (P2₁/c) and zero-dimensional (0D) structures, which can be viewed as the assembly of promising aromatic molecules and different copper halide tetrahedrons. Upon the irradiation of deep ultraviolet light, (C₈H₁₄N₂)CuCl₃, (C₈H₁₄N₂)CuBr₃,_, and (C₈H₁₄N₂)CuI₃ show green emission peaking at ∼520 nm with a photoluminescent quantum yield (PLQY) of 3.38, 35.19, and 17.81%, while (C₈H₁₄N₂)CuCl₃·H₂O displays yellow emission centered at ∼532 nm with a PLQY of 2.88%. A white light-emitting diode (WLED) was successfully fabricated by employing (C₈H₁₄N₂)CuBr₃ as a green emitter, demonstrating the potential of copper halides for applications in the green lighting field.

Excited-State Dopant-Host Energy-Level Alignment: Toward a Better Understanding of the Photoluminescence Behaviors of Doped Phosphors

Luminescent materials, also known as phosphors, have been widely used for applications such as emissive displays, fluorescent lamps, light-emitting diodes, and X-ray scintillation detectors. The energy-level diagram of a phosphor is extremely important for understanding its photoluminescence behavior. Here, we demonstrate through a combined density functional theory and experimental study that excited-state energy-level alignment accounts for the photoluminescence behaviors much better than ground-state energy-level alignment. An efficient doped phosphor should exhibit a type I excited-state dopant-host energy-level alignment, regardless of whether its ground-state alignment is type I. A type II excited-state dopant-host energy-level alignment implies that exciton dissociation, resulting in photoluminescence quenching. Our results provide not only a better understanding of the photoluminescence behaviors of the reported phosphors but also critical guidance for designing prospective luminescent materials.

Centimeter-Sized Piezoelectric Single Crystal of Chiral Bismuth-Based Hybrid Halide with Superior Electrostrictive Coefficient

The lead-free hybrid perovskite piezoelectrics possess advantages of easy processing, light weight, and low-toxicity over inorganic ceramics. However, the lack of understanding in structure-property relationships hinders exploration of new molecular piezoelectric crystals with excellent performances. Herein, by introducing chiral α-phenylethylammonium (α-PEA⁺ ) cations into bismuth-based hybrid halides, centimeter-sized (R-α-PEA)₄ Bi₂ I₁₀ and (S-α-PEA)₄ Bi₂ I₁₀ single crystals with a superior piezoelectric voltage coefficient g₂₂ of 309 mV m N^-1 , are obtained. Structural rigidity in crystals leads to a remarkable electrostrictive coefficient Q₂₂ of 25.8 m⁴ C^-2 , nearly 20 times higher than that of poly(vinylidene fluoride) (PVDF), which is beneficial to improve piezoelectricity with the synergistic effect of chirality. Moreover, the as-grown crystals show outstanding phase stability from 173 K to ≈470 K. This work suggests a design strategy based on rigidity and chirality to exploit novel piezoelectrics among hybrid metal halides.

Photophysical properties of tetrabutylammonium metal chlorides with different inorganic frameworks

The luminescence of single crystals of (TBA)PbCl₃, (TBA)₂Sb₂Cl₈, (TBA)₃Bi₂Cl₉ and (TBA)SnCl₅·2EtOH (TBA = tetrabutylammonium, EtOH = Ethanol) synthsized were assigned distinctively to the centres of self-trapped excitons (STEs), TBA⁺, TBA⁺ and co-emission of STEs and TBA⁺. This work demonstrates that organic cations without benzene or aromatic rings can also be used as the sole luminescence centres for metal halides.

Regulating the coordination geometry of polyhedra in zero-dimensional metal halides for tunable emission

Although self-trapped exciton (STE) emissions in zero-dimensional metal halides have been intensively investigated, the understanding of the relationship between the coordination geometries of the metal halides and their photophysical properties is still lacking. In this work, we successfully synthesized single crystals, with strong STE emissions, of the bimetallic materials (Bmpip)₉[Pb₃Br₁₁](ZnBr₄)₂ (PbZn-Br) and (Bmpip)₉[Pb₃Br₁₁](MnBr₄)₂ (PbMn-Br), where Bmpip⁺ is 1-butyl-1-methyl-piperidinium (C₁₀H₂₂N⁺), via a facile anti-solvent crystallization strategy. With respect to the monometallic material, (Bmpip)₂[PbBr₄] (Pb-Br), the introduction of Zn²⁺ and Mn²⁺ effectively alters the coordination geometry of the lead bromide polyhedral configuration from a PbBr₄^2- tetrahedron to a Pb₃Br₁₁^5- trimer. As a result, the maximum emission peak of PbZn-Br exhibits an obvious red shift and the full width at half maximum is almost two-fold wider than that of Pb-Br due to stronger electron-phonon coupling. Moreover, due to the intrinsic emission of the Mn²⁺ ions, an intriguing tunable emission was achieved in PbMn-Br with an impressively high photoluminescence quantum yield of up to 67%. The ultra-stable PbMn-Br single crystals show potential as an ideal down-conversion phosphor for use in UV-pumped white light-emitting diode devices.

Multimodal Luminescent Low-Dimension Cs2ZrCl6:xSb3+ Crystals for White Light-Emitting Diodes and Information Encryption

Low-dimension perovskite materials have attracted wide attention due to their excellent optical properties and stability. Herein, Sb³⁺-doped Cs₂ZrCl₆ crystals are synthesized by a coprecipitation method in which Sb³⁺ ions partially replace Zr⁴⁺ ions. The Cs₂ZrCl₆:xSb³⁺ powder shows blue and orange-red emissions under a 254 and 365 nm light, respectively, due to the [ZrCl₆]^2- octahedron and [SbCl₆]^3- octahedron. The photoluminescence quantum yield (PLQY) of Cs₂ZrCl₆:xSb³⁺ (x = 0.1) crystals is up to 52.5%. According to experimental and computational results, the emission mechanism of the Cs₂ZrCl₆:xSb³⁺ crystals is proposed. On the one hand, a wide blue emission with a large Stokes shift is caused by the self-trapping excitons of [ZrCl₆]^2- octahedra under a 260 nm excitation. On the other hand, the luminescence mechanism of [SbCl₆]^3- octahedron is divided into two parts: ¹P₁ → ¹S₀ (490 nm) and ³P₁ → ¹S₀ (625 nm). The broad-band emission, high PLQY, and excellent stability endow the Cs₂ZrCl₆:xSb³⁺ powders with the potential for the fabrication of white light-emitting diodes (WLEDs). A WLED device is fabricated using a commercial 310 nm NUV chip, which shows a high color rendering index of 89.7 and a correlated color temperature of 5333 K. In addition, the synthesized Cs₂ZrCl₆:xSb³⁺ crystals can be also successfully used for information encryption. Our work will provide a deep understanding of the photophysical properties of Sb³⁺-doped perovskites and facilitate the development of Cs₂ZrCl₆:xSb³⁺ crystals in encrypting multilevel optical codes and WLEDs.

Linear optical afterglow and nonlinear optical harmonic generation from chiral tin(IV) halides: the role of lattice distortions

The striking chemical variability of hybrid organic-inorganic metal halides (HOMHs) endows them with fascinating optoelectronic properties. The inorganic skeletons of HOMHs are often flexible and their lattice deformations could serve as an effective factor for enabling the functionalities of HOMHs. Here, the linear and nonlinear optical properties of zero-dimensional (0D) tin(IV) halides have been tuned by structural distortion facilitated by the chiral amines. Enantiopure α-methylbenzyl ammoniums (XMBA, X = Cl, F) effectively transfer their chirality to the inorganic scaffolds when forming the tin(IV) halides, which enables polar arrangements in their crystals and leads to outstanding second-order nonlinear optical performances. In contrast, the racemic mixture of R- and S-FMBA results in the formation of HOMHs with room temperature phosphorescence. The lower lattice deformation in (rac-FMBA)₂SnCl₆ restrains the non-radiative decay from electron-phonon coupling and facilitates the photoluminescence. Meanwhile, the marked π-π interaction stabilizes the T₁ state for phosphorescent emission. These distinct linear and nonlinear optical properties denote the important role that the lattice distortion plays in tuning the optical properties of low-dimensional HOMHs, and offer a promising perspective of 0D tin(IV) halides for applications in optoelectronic materials and devices.

Solution-Processable Copper Halide Based Hybrid Materials Consisting of Cationic Ligands with Different Coordination Modes

Using cationic ligands containing both aromatic and aliphatic coordination sites, we have synthesized and structurally characterized five new CuX-based hybrid materials consisting of anionic inorganic motifs that also form coordinate bonds with the cationic organic ligands. As a result of the unique bonding nature at the inorganic/organic interfaces, these compounds demonstrate strong resistance toward heat and can be readily processed in solution. They emit light in the visible region ranging from cyan to yellow color, with the highest photoluminescence quantum yield (PLQY) reaching 71%. The influence of the different coordination modes of the ligands on their emission behavior was investigated employing both experimental and theoretical methods, which have provided insight in understanding structure-property relationships in these materials and guidelines for tuning and enhancing their chemical and physical properties.

High-Efficiency Intrinsic Yellow-Orange Emission in Hybrid Indium Bromide with Double Octahedral Configuration

Zero-dimensional (0D) In-based organic-inorganic metal halides (OIMHs) have received growing interest in recent years as promising luminescent materials. However, the high efficiencies of 0D In-based OIMHs are all dependent on Sb doping in the existing literature. Here, we report a novel 0D In-based OIMH (C₁₀H₂₂N₂)₂In₂Br₁₀, which exhibits intrinsic broadband emission (610 nm), and the photoluminescence quantum yield (PLQY) can reach 70% without Sb doping. (C₁₀H₂₂N₂)₂In₂Br₁₀ shows a typical 0D structure with three different In-Br polyhedra (two octahedra and one tetrahedron) separated by large organic cations. Based on the optical property measurements and theoretical calculations, we demonstrate that (C₁₀H₂₂N₂)₂In₂Br₁₀ is an indirect semiconductor with a band gap of 3.74 eV, and the In-Br inorganic moiety is primarily responsible for the intense emission of (C₁₀H₂₂N₂)₂In₂Br₁₀. Interestingly, the unique double octahedral configuration in (C₁₀H₂₂N₂)₂In₂Br₁₀ may enhance the structural distortion and stimulate the self-trapped excitons (STEs), leading to the related high PLQY. Our work provides a novel 0D In-based OIMH with high-efficiency intrinsic emission, which is helpful for understanding the structure-PL relationships of hybrid halides.

Reversible Luminescent Switching Induced by Heat/Water Treatment in a Zero-Dimensional Hybrid Antimony(Ⅲ) Chloride

Recently zero-dimensional (0-D) inorganic-organic metal halides (IOMHs) have become a promising class of optoelectronic materials. Herein, we report a new photoluminescent (PL) 0-D antimony(III)-based IOMH single crystal, namely [H2BPZ][SbCl5]·H2O (BPZ = benzylpiperazine). Photophysical characterizations indicate that [H2BPZ][SbCl5]·H2O exhibits singlet/triplet dual-band emission. Density functional theory (DFT) calculations suggest that [H2BPZ][SbCl5]·H2O has the large energy difference between singlet and triplet states, which might induce the dual emission in this compound. Temperature-dependent PL spectra analyses suggest the soft lattice and strong electron-phonon coupling in this compound. Thermogravimetric analysis shows that the water molecules in the lattice of the title crystal could be removed by thermal treatment, giving rise to a dehydrated phase of [H2BPZ][SbCl5]. Interestingly, such structural transformation is accompanied by a reversible PL emission transition between red light (630 nm, dehydrated phase) and yellow light (595 nm, water-containing phase). When being exposed to an environment with 77% relative humidity, the emission color of the dehydrated phase was able to change from red to yellow within 20 s, and the red emission could be restored after reheating. The red to yellow emission switching could be achieved in acetone with water concentration as low as 0.2 vol%. The reversible PL transition phenomenon makes [H2BPZ][SbCl5]·H2O a potential material for luminescent water-sensing.

All-Inorganic Zero-Dimensional Sb3+-Doped Rb2ScCl5(H2O) Perovskite Single Crystals: Efficient Self-Trapped Exciton Emission and X-ray Detection

Zero-dimensional (0D) halide perovskites have attracted extensive attention for their potential applications in solid-state lighting and X-ray detection due to their fascinating optoelectronic properties and convenient solution processability. Herein, we report the synthesis and photophysical properties of high-quality Sb³⁺-doped 0D Rb₂ScCl₅(H₂O) perovskite single crystals. The pristine crystals exhibit weak yellow self-trapped exciton (STE) emission peaking at 632 nm. The emission quantum yield can be dramatically enhanced from less than 1% to about 53% via Sb³⁺ doping. Spectroscopic characterizations indicate that the photoluminescence enhancement is a result of the efficient energy transfer from Sb³⁺ to the emissive STEs. Additionally, 0.2%Sb³⁺:Rb₂ScCl₅(H₂O) single crystals exhibit potential application in direct X-ray detection with a high sensitivity of 58.5 μC Gy^-1 cm^-2.