Hybrid bioinorganic approach to solar-to-chemical conversion

CO2 activation and dissociation on In2O3(110) supported PdnPt(4-n) (n = 0-4) catalysts: a density functional theory study

Converting CO2 into valuable chemicals via catalytic reactions can mitigate both the greenhouse effect and energy shortage problems, thus designing efficient catalysts have attracted considerable attention over the past decades. In this work, a density functional theory (DFT) calculation was carried out to investigate the CO2 activation and dissociation processes on various PdnPt(4-n)/In2O3 (n = 0-4) catalysts. The PdnPt(4-n)/In2O3 models were initially built, and the interface sites of PdnPt(4-n)/In2O3 for CO2 adsorption were confirmed among cluster sites and substrate sites. The CO2 adsorption geometries, charger transfer, and projected density of states (PDOS) were analyzed to study the CO2-PdnPt(4-n)/In2O3 interactions. From the adsorbed *CO2, the transition states (TSs) for CO2 dissociation to form *CO and *O were gained to reveal the characteristics of the activated CO2δ-. Overall, according to the adsorption energy Eads results, the bimetallic PdPt3/In2O3 and Pd3Pt/In2O3 catalysts showed the strongest and weakest CO2 adsorption stabilities, respectively, while the Pd element addition decreases the barriers for CO2 dissociation with the priority order of Pd4 > Pd3Pt > Pd2Pt2 > PdPt3 > Pt4. The Brønsted-Evans-Polanyi (BEP) relation between activation barriers (Eb) and reaction energies E was obtained for the CO2 dissociation mechanism on PdnPt(4-n)/In2O3 catalysts with the equation of E = 0.20Eb + 0.40. Finally, the optimal Pd2Pt2/In2O3 catalyst for CO2 activation and dissociation was proposed. This study provides useful information for CO2 activation and conversation procedures on bimetal-oxide catalysts, and helps to take the optimal design of PdPt/In2O3 catalysts for the CO2 reaction.

An insight into the bioelectrochemical photoreduction of CO2 to value-added chemicals

Goal of sustainable carbon neutral economy can be achieved by designing an efficient CO₂ reduction system to generate biofuels, in particular, by mimicking the mechanism of natural photosynthesis using semiconducting nanomaterials interfaced with electroactive bacteria (EAB) in a photosynthetic microbial electrosynthesis (PMES) system. This review paper presents an overview of the recent advancements in the biohybrid photoanode and photocathode materials. We discuss the reaction mechanism observed at photoanode and photocathode to enhance our understanding on the solar driven MES. We extend the discussion by showcasing the potential activity of EABs toward high selectivity and production rates for desirable products by manipulating their genomic sequence. Additionally, the critical challenges associated in scaling up the PMES system including the strategies for diminution of reactive oxygen species, low solubility of CO₂ in the typical electrolytes, low selectivity of product species are presented along with the suggestions of alternative strategies to achieve economically viable generation of (bio)commodities.

Biofuels for a sustainable future

Rapid increases of energy consumption and human dependency on fossil fuels have led to the accumulation of greenhouse gases and consequently, climate change. As such, major efforts have been taken to develop, test, and adopt clean renewable fuel alternatives. Production of bioethanol and biodiesel from crops is well developed, while other feedstock resources and processes have also shown high potential to provide efficient and cost-effective alternatives, such as landfill and plastic waste conversion, algal photosynthesis, as well as electrochemical carbon fixation. In addition, the downstream microbial fermentation can be further engineered to not only increase the product yield but also expand the chemical space of biofuels through the rational design and fine-tuning of biosynthetic pathways toward the realization of "designer fuels" and diverse future applications.

Nanomaterials Facilitating Microbial Extracellular Electron Transfer at Interfaces

Electrochemically active bacteria can transport their metabolically generated electrons to anodes, or accept electrons from cathodes to synthesize high-value chemicals and fuels, via a process known as extracellular electron transfer (EET). Harnessing of this microbial EET process has led to the development of microbial bio-electrochemical systems (BESs), which can achieve the interconversion of electrical and chemical energy and enable electricity generation, hydrogen production, electrosynthesis, wastewater treatment, desalination, water and soil remediation, and sensing. Here, the focus is on the current understanding of the microbial EET process occurring at both the bacteria-electrode interface and the biotic interface, as well as some attempts to improve the EET by using various nanomaterials. The behavior of nanomaterials in different EET routes and their influence on the performance of BESs are described. The inherent mechanisms will guide rational design of EET-related materials and lead to a better understanding of EET mechanisms.

An external magnetic field moderating Cr(VI) stress for simultaneous enhanced acetate production and Cr(VI) removal in microbial electrosynthesis system

A stressful heavy metal circumstance disfavors production of acetate from bicarbonate reduction in the biocathode of microbial electrosynthesis system (MES) with simultaneous function of heavy metal removal/recovery. It is of great interest to explore effective approaches to moderate the heavy metal stress with achievement of simultaneous enhanced acetate production and heavy metal removal in MES. Herein, a magnetic field strength of 100 mT was successfully employed to moderate Cr(VI) stress, achieving simultaneous production of acetate at a rate of 1.48 ± 0.01 mg/L/h and Cr(VI) removal at a rate of 1.67-2.42 mg/L/h in the Serratia marcescens Q1 catalyzed cathode of MES under periodical addition of bicarbonate and Cr(VI), 1.35-fold (acetate production) and 1.34-1.46 times (Cr(VI) removal) of those in the controls in the absence of magnetic field. This simultaneous efficient acetate production and Cr(VI) removal was regulated by the magnetic field and the stressful Cr(VI), which induced the S. marcescens to physiologically release additive amounts of extracellular polymeric substances with a compositional diversity and containing the electrochemically active c-type cytochromes to facilitate extracellular electron transfer. This study confirmed the importance of magnetic field in developing the S. marcescens catalytic activity for moderating Cr(VI) stress, and thus provided a feasible approach for simultaneous efficient acetate production and Cr(VI) removal/recovery in MES, from waters contaminated with Cr(VI).

Polysulfide induced synthesis of Mo doped NiSx based on solid nanoplate arrays for efficient oxygen evolution catalysis

In situ sulfuration in the cage of oxide nanoplate arrays by polysulfides to prepare sulfide anodes with high OER efficiency.

Powering the next industrial revolution: transitioning from nonrenewable energy to solar fuels via CO2 reduction

Solar energy has been used for decades for the direct production of electricity in various industries and devices; however, harnessing and storing this energy in the form of chemical bonds has emerged as a promising alternative to fossil fuel combustion. The common feedstocks for producing such solar fuels are carbon dioxide and water, yet only the photoconversion of carbon dioxide presents the opportunity to generate liquid fuels capable of integrating into our existing infrastructure, while simultaneously removing atmospheric greenhouse gas pollution. This review presents recent advances in photochemical solar fuel production technology. Although efforts in this field have created an incredible number of methods to convert carbon dioxide into gaseous and liquid fuels, these can generally be classified under one of four categories based on how incident sunlight is utilised: solar concentration for thermoconversion (Category 1), transformation toward electroconversion (Category 2), natural photosynthesis for bioconversion (Category 3), and artificial photosynthesis for direct photoconversion (Category 4). Select examples of developments within each of these categories is presented, showing the state-of-the-art in the use of carbon dioxide as a suitable feedstock for solar fuel production.

Solar energy has been used for decades for the direct production of electricity in various industries and devices. However, harnessing and storing this energy in the form of chemical bonds has emerged as a promising alternative to fossil fuels.

Enhancing Biosynthesis and Manipulating Flux in Whole Cells with Abiotic Catalysis

Metabolic engineering uses genetic strategies to drive flux through desired pathways. Recent work with electrochemical, photochemical, and chemocatalytic setups has revealed that these systems can also expand metabolic pathways and manipulate flux in whole cells. Electrochemical systems add or remove electrons from metabolic pathways to direct flux to more- or less-reduced products. Photochemical systems act as synthetic light-harvesting complexes and yield artificial photosynthetic organisms. Biocompatible chemocatalysis increases product scope, streamlines syntheses, and yields single-flask processes to deliver products that would be challenging to synthesize through biosynthetic means alone. Here, we exclusively highlight systems that combine abiotic systems with living whole cells, taking particular note of strategies that enable the merger of these typically disparate systems.

Cadmium sulfide nanoparticles-assisted intimate coupling of microbial and photoelectrochemical processes: Mechanisms and environmental applications

Intimate coupling of microbial extracellular electron transfer (EET) and photoelectrochemical processes is an emerging research area with great potential to circumvent many disadvantages associated with traditional techniques that depend on independent microbial or photocatalysis treatment. Microbial EET processes involve microorganism oxidation of extracellular electron donors for respiration and synchronous reduction of extracellular electron acceptors to form an integrated respiratory chain. Coupled microbial EET-photoelectrochemical technologies greatly improve energy conversion efficiency providing both economic and environmental benefits. Among substitutes for semiconductor photocatalysts, cadmium sulfide nanoparticles (CdS NPs) possess several attractive properties. Specifically, CdS NPs have suitable electrical conductivity, large specific surface area, visible light-driven photocatalysis capability and robust biocompatibility, enabling them to promote hybrid microbial-photoelectrochemical processes. This review highlights recent advances in intimately coupled CdS NPs-microbial extracellular electron transfer systems and examines the mechanistic pathways involved in photoelectrochemical transformations. Finally, the prospects for emerging applications utilizing hybrid CdS NPs-based microbial-photoelectrochemical technologies are assessed. As such, this review provides a rigorous fundamental analysis of electron transport dynamics for hybrid CdS NPs-microbial photoelectrochemical processes and explores the applicability of engineered CdS NPs-biohybrids for future applications, such as in environmental remediation and clean-energy production.

Biosynthesis of inorganic nanomaterials using microbial cells and bacteriophages

Inorganic nanomaterials are widely used in chemical, electronics, photonics, energy and medical industries. Preparing a nanomaterial (NM) typically requires physical and/or chemical methods that involve harsh and environmentally hazardous conditions. Recently, wild-type and genetically engineered microorganisms have been harnessed for the biosynthesis of inorganic NMs under mild and environmentally friendly conditions. Microorganisms such as microalgae, fungi and bacteria, as well as bacteriophages, can be used as biofactories to produce single-element and multi-element inorganic NMs. This Review describes the emerging area of inorganic NM biosynthesis, emphasizing the mechanisms of inorganic-ion reduction and detoxification, while also highlighting the proteins and peptides involved. We show how analysing a Pourbaix diagram can help us devise strategies for the predictive biosynthesis of NMs with high producibility and crystallinity and also describe how to control the size and morphology of the product. Here, we survey biosynthetic inorganic NMs of 55 elements and their applications in catalysis, energy harvesting and storage, electronics, antimicrobials and biomedical therapy. Furthermore, a step-by-step flow chart is presented to aid the design and biosynthesis of inorganic NMs employing microbial cells. Future research in this area will add to the diversity of available inorganic NMs but should also address scalability and purity.

Construction of Functionally Compartmental Inorganic Photocatalyst-Enzyme System via Imitating Chloroplast for Efficient Photoreduction of CO2 to Formic Acid

Inorganic photocatalyst-enzyme systems are a prominent platform for the photoreduction of CO₂ to value-added chemicals and fuels. However, poor electron transfer kinetics and enzyme deactivation by reactive oxygen species in the photoexcitation process severely limit catalytic efficiency. In chloroplast, enzymatic CO₂ reduction and photoexcitation are compartmentalized by the thylakoid membrane, which protects enzymes from photodamage, while the tightly integrated photosystem facilitates electron transfer, promoting photocatalysis. By mimicking this strategy, we constructed a novel functionally compartmental inorganic photocatalyst-enzyme system for CO₂ reduction to formate. To accomplish efficient electron transfer, we first synthesized an integrated artificial photosystem by conjugation of the cocatalyst (a Rh complex) onto thiophene-modified C₃N₄ (TPE-C₃N₄), demonstrating an NADH regeneration rate of 9.33 μM·min^-1, 2.33 times higher than that of a homogeneous counterpart. The enhanced NADH regeneration activity was caused by the tightly conjugated structure of the artificial photosystem, enabling rapid electron transfer from TPE-C₃N₄ to the Rh complex. To protect formate dehydrogenase (FDH) from photoinduced deactivation, FDH was encapsulated into MAF-7, a metal-organic framework (MOF) material, to compartmentalize FDH from the toxic photoexcitation process, similar to the function of the thylakoid membrane. Moreover, the triazole linkers of MAF-7 possess both hydrophilicity and pH-buffering capacity providing a stable microenvironment for FDH, which could enhance enzyme stability in photosynthesis. The synergy between the enhanced electron transfer of TPE-C₃N₄ for NADH cofactor regeneration and MOF-protection of the redox enzyme enables the construction of a functionally compartmental inorganic photocatalyst-enzyme association system, promoting CO₂ photoconversion to formic acid with a yield of 16.75 mM after 9 h of illumination, 3.24 times greater than that of the homogeneous reaction counterpart.

Efficient Photoelectron Capture by Ni Decoration in Methanosarcina barkeri-CdS Biohybrids for Enhanced Photocatalytic CO2-to-CH4 Conversion

Semi-artificial photosynthesis (biohybrid) provides an intriguing opportunity for efficient CO₂-to-CH₄ conversion. However, creating a desirable semiconductor in biohybrids remains a great challenge. Here, by doping Ni into CdS nanoparticles, we have successfully developed the Methanosarcina barkeri-Ni:CdS biohybrids. The CH₄ yield by the M. barkeri-Ni_(0.75%):CdS biohybrids was approximately 250% higher than that by the M. barkeri-CdS biohybrids. The suitable Ni dopants serve as an effective electron sink, which accelerates the photoelectron transfer in biohybrids. In addition, Ni doping changes the metabolic status of M. barkeri and results in a higher expression of a series of proteins for electron transfer, energy conversion, and CO₂ fixation. These increased proteins can promote the photoelectron capture by M. barkeri and injection into cells, which trigger a higher intracellular reduction potential to drive the reduction of CO₂ to CH₄. Our discovery will offer a promising strategy for the optimization of biohybrids in the solar-to-chemical conversion.

•

M. barkeri-Ni:CdS biohybrids were successfully developed for CO₂ reduction

•

A highest QE of 2.08% was achieved by the M. barkeri-Ni_(0.75%):CdS biohybrids

•

Ni dopants effectively suppressed the electron-hole recombination in biohybrids

•

Ni doping changed the metabolic status of M. barkeri in biohybrids

Crystalline Copper Selenide as a Reliable Non-Noble Electro(pre)catalyst for Overall Water Splitting

Electrochemical water splitting remains a frontier research topic in the quest to develop artificial photosynthetic systems by using noble metal-free and sustainable catalysts. Herein, a highly crystalline CuSe has been employed as active electrodes for overall water splitting (OWS) in alkaline media. The pure-phase klockmannite CuSe deposited on highly conducting nickel foam (NF) electrodes by electrophoretic deposition (EPD) displayed an overpotential of merely 297 mV for the reaction of oxygen evolution (OER) at a current density of 10 mA cm-2 whereas an overpotential of 162 mV was attained for the hydrogen evolution reaction (HER) at the same current density, superseding the Cu-based as well as the state-of-the-art RuO2 and IrO2 catalysts. The bifunctional behavior of the catalyst has successfully been utilized to fabricate an overall water-splitting device, which exhibits a low cell voltage (1.68 V) with long-term stability. Post-catalytic analyses of the catalyst by ex-situ microscopic, spectroscopic, and analytical methods confirm that under both OER and HER conditions, the crystalline and conductive CuSe behaves as an electro(pre)catalyst forming a highly reactive in situ crystalline Cu(OH)2 overlayer (electro(post)catalyst), which facilitates oxygen (O2 ) evolution, and an amorphous Cu(OH)2 /CuOx active surface for hydrogen (H2 ) evolution. The present study demonstrates a distinct approach to produce highly active copper-based catalysts starting from copper chalcogenides and could be used as a basis to enhance the performance in durable bifunctional overall water splitting.

Microbial electrosynthesis from CO2: Challenges, opportunities and perspectives in the context of circular bioeconomy

Recycling CO₂ into organic products through microbial electrosynthesis (MES) is attractive from the perspective of circular bioeconomy. However, several challenges need to be addressed before scaling-up MES systems. In this review, recent advances in electrode materials, microbe-catalyzed CO₂ reduction and MES energy consumption are discussed in detail. Anode materials are briefly reviewed first, with several strategies proposed to reduce the energy input for electron generation and enhance MES bioeconomy. This was followed by discussions on MES cathode materials and configurations for enhanced chemolithoautotroph growth and CO₂ reduction. Various chemolithoautotrophs, effective for CO₂ reduction and diverse bioproduct formation, on MES cathode were also discussed. Finally, research efforts on developing cost-effective process for bioproduct extraction from MES are presented. Future perspectives to improve product formation and reduce energy cost are discussed to realize the application of the MES as a chemical production platform in the context of building a circular economy.

Hybrid Catalysts for Artificial Photosynthesis: Merging Approaches from Molecular, Materials, and Biological Catalysis

Increasing demand for sustainable energy sources continues to motivate the development of new catalytic processes that store intermittent energy in the form of chemical bonds. In this context, photosynthetic organisms harvest light to drive dark reactions reducing carbon dioxide, an abundant and accessible carbon source, to store solar energy in the form of glucose and other biomass feedstocks. Inspired by this biological process, the field of artificial photosynthesis aims to store renewable energy in chemical bonds spanning fuels, foods, medicines, and materials using light, water, and CO₂ as the primary chemical feedstocks, with the added benefit of mitigating the accumulation of CO₂ as a greenhouse gas in the atmosphere. As such, devising new catalyst platforms for transforming CO₂ into value-added chemical products is of importance. Historically, catalyst design for artificial photosynthesis has been approached from the three traditional fields of catalysis: molecular, materials, and biological. In this Account, we show progress from our laboratory in constructing new hybrid catalysts for artificial photosynthesis that draw upon design concepts from all three of these traditional fields of catalysis and blur the boundaries between them. Starting with molecular catalysis, we incorporated biological design elements that are prevalent in enzymes into synthetic systems. Specifically, we demonstrated that proper positioning of intramolecular hydrogen bond donors or addition of intermolecular multipoint hydrogen bond donors with classic iron porphyrin and nickel cyclam platforms can substantially increase rates of CO₂ reduction and break electronic scaling relationships. In parallel, we incorporated a key materials design element, namely, high surface area and porosity for maximizing active site exposure, into molecular systems. A supramolecular porous organic cage molecule was synthesized with iron porphyrin building blocks, and the porosity was observed to facilitate substrate and charge transport through the catalyst film. In turn, molecular design elements can be incorporated into materials catalysts for CO₂ reduction. First, we utilized molecular synthons in a bottom-up reticular approach to drive polymerization/assembly into a bulk framework material. Second, we established an organometallic approach in which molecular ligands, including chelating ones, are adsorbed onto a bulk inorganic solid to create and tune new active sites on surfaces. Finally, we describe two examples in which molecular, materials, and biological design elements are all integrated to catalyze the reduction of CO₂ into CH₄ using a hybrid biological-materials interface with sustainably generated H₂ as the reductant or to reduce CO into value-added C₂ products acetate and ethanol using a hybrid molecular-materials interface to construct a biomimetic, bimetallic active site. Taken together, our program in catalysis for energy and sustainability has revealed that combining more conventional design strategies in synergistic ways can lead to advances in artificial photosynthesis.

Enhanced Photogenerated Electron Transfer in a Semiartificial Photosynthesis System Based on Highly Dispersed Titanium Oxide Nanoparticles

In this study, a hybrid semiartificial photosynthesis system based on chloroplast (CLP) and titanium oxide nanoparticles (TiO₂ NPs) was constructed. 2,6-Dichlorophenolindophenol (DCPIP) reduction by TiO₂/CLP complex and methylene blue (MB) reduction by TiO₂ were used to determine enhanced photogenerated electron transfer in this hybrid system. The DCPIP reduction by the TiO₂/CLP complex showed the same trend as MB reduction by TiO₂ as a function of concentration of TiO₂ NPs, indicating interception of photogenerated electrons in TiO₂ by CLP that leads to enhanced photosynthesis efficiency. Decreased photoluminescence intensity and shortened excited-state lifetime of the TiO₂/CLP complex compared to that of pure TiO₂ also support electron transfer from TiO₂ to CLP. Longer visible light absorption wavelength and increasing valence band edges reveal the narrower band gap of TiO₂/CLP, which finally results in the enhanced electron transfer from TiO₂ to CLP. Higher ferricyanide reduction and enhanced ATP formation with the TiO₂/CLP complex demonstrate the accelerated electron-transfer rate of the electron-transfer chain. This study reveals the mechanism of how TiO₂ interacts with CLP to enhance the photosynthesis via constructing a semiartificial photosynthesis system.

Organic-inorganic hybrids for CO2 sensing, separation and conversion

Motivated by the air pollution that skyrocketed in numerous regions around the world, great effort was placed on discovering new classes of materials that separate, sense or convert CO₂ in order to minimise impact on human health. However, separation, sensing and conversion are not only closely intertwined due to the ultimate goal of improving human well-being, but also because of similarities in material prerequisites -e.g. affinity to CO₂. Partly inspired by the unrivalled performance of complex natural materials, manifold inorganic-organic hybrids were developed. One of the most important characteristics of hybrids is their design flexibility, which results from the combination of individual constituents with specific functionality. In this review, we discuss commonly used organic, inorganic, and inherently hybrid building blocks for applications in separation, sensing and catalytic conversion and highlight benefits like durability, activity, low-cost and large scale fabrication. Moreover, we address obstacles and potential future developments of hybrid materials. This review should inspire young researchers in chemistry, physics and engineering to identify and overcome interdisciplinary research challenges by performing academic research but also - based on the ever-stricter emission regulations like carbon taxes - through exchanges between industry and science.

Coupling biology to synthetic nanomaterials for semi-artificial photosynthesis

Biohybrid artificial photosynthesis aims to combine the advantages of biological specificity with a range of synthetic nanomaterials to create innovative semi-synthetic systems for solar-to-chemical conversion. Biological systems utilize highly efficient molecular catalysts for reduction-oxidation reactions. They can operate with minimal overpotentials while selectively channeling reductant energy into specific transformation chemistries and product forming pathways. Nanomaterials can be synthesized to have efficient light-absorption capacity and tuneability of charge separation by manipulation of surface chemistries and bulk compositions. These complementary aspects have been combined in a variety of ways, for example, where biological light-harvesting complexes function as antenna for nanoparticle catalysts or where nanoparticles function as light capture, charge separation components for coupling to chemical conversion by redox enzymes and whole cells. The synthetic diversity that is possible with biohybrids is still being explored. The progress arising from creative approaches is generating new model systems to inspire scale-up technologies and generate understanding of the fundamental mechanisms that control energy conversion at the molecular scale. These efforts are leading to discoveries of essential design principles that can enable the development of scalable artificial photosynthesis systems.

Microbial electrochemical stimulation of caproate production from ethanol and carbon dioxide

The production of value added chemicals from CO₂ is of critical importance for the practical application of microbial electrosynthesis (MES). Here, a binary electron donor (ED) design (using electrode and ethanol) was introduced to provide an efficient caproate production with the bioconversion of both CO₂ and ethanol. A maximum caproate production rate of 2.41 ± 0.69 g L^-1 d^-1, and a final concentration of 7.66 ± 1.38 g L^-1 was achieved. Caproate production selectivity based on the substrate increased to 91.47 ± 0.58% (Binary EDs) from 32.22 ± 32.58% (open circuit Electrode ED). An observed amount of 23.43 ± 0.69% of carbon within the final binary ED products originated from the CO₂. This work proves for the first time the potential of caproate production from CO₂ utilization and ethanol upgrading using solid electrodes to regulate the chain elongation process.

Semi-biological approaches to solar-to-chemical conversion

This review provides an overview of the cross-disciplinary field of semi-artificial photosynthesis, which combines strengths of biocatalysis and artificial photosynthesis to develop new concepts and approaches for solar-to-chemical conversion.

Nonmetallic Abiotic-Biological Hybrid Photocatalyst for Visible Water Splitting and Carbon Dioxide Reduction

Both artificial photosystems and natural photosynthesis have not reached their full potential for the sustainable conversion of solar energy into specific chemicals. A promising approach is hybrid photosynthesis combining efficient, non-toxic, and low-cost abiotic photocatalysts capable of water splitting with metabolically versatile non-photosynthetic microbes. Here, we report the development of a water-splitting enzymatic photocatalyst made of graphitic carbon nitride (g-C₃N₄) coupled with H₂O₂-degrading catalase and its utilization for hybrid photosynthesis with the non-photosynthetic bacterium Ralstonia eutropha for bioplastic production. The g-C₃N₄-catalase system has an excellent solar-to-hydrogen efficiency of 3.4% with a H₂ evolution rate up to 55.72 μmol h⁻¹ while evolving O₂ stoichiometrically. The hybrid photosynthesis system built with the water-spitting g-C₃N₄-catalase photocatalyst doubles the production of the bioplastic polyhydroxybutyrate by R. eutropha from CO₂ and increases it by 1.84-fold from fructose. These results illustrate how synergy between abiotic non-metallic photocatalyst, enzyme, and bacteria can augment solar-to-multicarbon chemical conversion.

•

H₂O₂-degrading enzymes from R. eutropha enable visible-light water splitting by C₃N₄

•

C₃N₄ coupled with bovine catalase has a solar-to-hydrogen efficiency of 3.4%

•

C₃N₄-catalase increases CO₂ conversion into bioplastic under light by R. eutropha

•

Heterotrophic bioplastic production by R. eutropha is also improved by C₃N₄-catalase

Nanowired Bioelectric Interfaces

Biological systems have evolved biochemical, electrical, mechanical, and genetic networks to perform essential functions across various length and time scales. High-aspect-ratio biological nanowires, such as bacterial pili and neurites, mediate many of the interactions and homeostasis in and between these networks. Synthetic materials designed to mimic the structure of biological nanowires could also incorporate similar functional properties, and exploiting this structure-function relationship has already proved fruitful in designing biointerfaces. Semiconductor nanowires are a particularly promising class of synthetic nanowires for biointerfaces, given (1) their unique optical and electronic properties and (2) their high degree of synthetic control and versatility. These characteristics enable fabrication of a variety of electronic and photonic nanowire devices, allowing for the formation of well-defined, functional bioelectric interfaces at the biomolecular level to the whole-organ level. In this Focus Review, we first discuss the history of bioelectric interfaces with semiconductor nanowires. We next highlight several important, endogenous biological nanowires and use these as a framework to categorize semiconductor nanowire-based biointerfaces. Within this framework we then review the fundamentals of bioelectric interfaces with semiconductor nanowires and comment on both material choice and device design to form biointerfaces spanning multiple length scales. We conclude with a discussion of areas with the potential for greatest impact using semiconductor nanowire-enabled biointerfaces in the future.

Fundamentals and applications of photocatalytic CO2 methanation

The extraction and combustion of fossil natural gas, consisting primarily of methane, generates vast amounts of greenhouse gases that contribute to climate change. However, as a result of recent research efforts, “solar methane” can now be produced through the photocatalytic conversion of carbon dioxide and water to methane and oxygen. This approach could play an integral role in realizing a sustainable energy economy by closing the carbon cycle and enabling the efficient storage and transportation of intermittent solar energy within the chemical bonds of methane molecules. In this article, we explore the latest research and development activities involving the light-assisted conversion of carbon dioxide to methane.

While natural gas and fossil fuels power human activities, increasing concerns over fuel reserves and environmental impacts require finding alternative, renewable resources. Here, authors review the fundamental science and progress on solar-powered conversion of carbon dioxide to methane.

Enhanced CO2 reduction and valuable C2+ chemical production by a CdS-photosynthetic hybrid system

Semi-artificial photosynthesis is an emerging technique in recent years. Here, we presented an inorganic-biological hybrid system composed of photosynthetic Rhodopseudomonas palustris and CdS nanoparticles coated on the bacterial surface. Under visible light irradiation, the CO2 reduction and valuable C2+ chemical production of R. palustris could be promoted by the photo-induced electrons from the CdS NPs. The increased energy-rich NADPH cofactor promoted the generation of the Calvin cycle intermediate, glyceraldehyde-3-phosphate. As a result, the production of solid biomass, carotenoids and poly-β-hydroxybutyrate (PHB) was increased to 148%, 122% and 147%, respectively. The photosynthetic efficiency (PE) of CdS-R. palustris was elevated from the original 4.31% to 5.98%. The surface loaded NP amount and the material-cell interface both played important roles in the efficient electron generation and transduction. The CdS-R. palustris hybrid system also exhibited a survival advantage over its natural counterparts under the autotrophic conditions. Under a practical solar/dark cycle, the produced biomass, carotenoid and PHB from the hybrid system also reach 139%, 117% and 135%, respectively. The CdS-photosynthetic hybrid system represents a powerful and expandable platform for advanced CO2 reduction and solar-to-chemical (S2C) conversion.

Towards Solar Methanol: Past, Present, and Future

This work aims to provide an overview of producing value-added products affordably and sustainably from greenhouse gases (GHGs). Methanol (MeOH) is one such product, and is one of the most widely used chemicals, employed as a feedstock for ≈30% of industrial chemicals. The starting materials are analogous to those feeding natural processes: water, CO2, and light. Innovative technologies from this effort have global significance, as they allow GHG recycling, while providing society with a renewable carbon feedstock. Light, in the form of solar energy, assists the production process in some capacity. Various solar strategies of continually increasing technology readiness levels are compared to the commercial MeOH process, which uses a syngas feed derived from natural gas. These strategies include several key technologies, including solar-thermochemical, photochemical, and photovoltaic-electrochemical. Other solar-assisted technologies that are not yet commercial-ready are also discussed. The commercial-ready technologies are compared using a technoeconomic analysis, and the scalability of solar reactors is also discussed in the context of light-incorporating catalyst architectures and designs. Finally, how MeOH compares against other prospective products is briefly discussed, as well as the viability of the most promising solar MeOH strategy in an international context.

Light-driven fine chemical production in yeast biohybrids

Inorganic-biological hybrid systems have potential to be sustainable, efficient, and versatile chemical synthesis platforms by integrating the light-harvesting properties of semiconductors with the synthetic potential of biological cells. We have developed a modular bioinorganic hybrid platform that consists of highly efficient light-harvesting indium phosphide nanoparticles and genetically engineered Saccharomyces cerevisiae, a workhorse microorganism in biomanufacturing. The yeast harvests photogenerated electrons from the illuminated nanoparticles and uses them for the cytosolic regeneration of redox cofactors. This process enables the decoupling of biosynthesis and cofactor regeneration, facilitating a carbon- and energy-efficient production of the metabolite shikimic acid, a common precursor for several drugs and fine chemicals. Our work provides a platform for the rational design of biohybrids for efficient biomanufacturing processes with higher complexity and functionality.

13C-Labeling the carbon-fixation pathway of a highly efficient artificial photosynthetic system

Interfacing the CO₂-fixing microorganism, Ralstonia eutropha, to the energy derived from hydrogen produced by water splitting is a viable approach to achieving renewable CO₂ reduction at high efficiencies. We employ ¹³C-labeling to report on the nature of CO₂ reduction in the inorganic water splitting|R. eutropha hybrid system. Accumulated biomass in a reactor under a ¹³C-enriched CO₂ atmosphere may be sampled at different time points during CO₂ reduction. Converting the sampled biomass into gaseous CO₂ allows the ¹³C/¹²C ratio to be determined by gas chromatography-mass spectrometry. After 2 hours of inoculation and the initiation of water splitting, the microbes adapted and began to convert CO₂ into biomass. The observed time evolution of the ¹³C/¹²C ratio in accumulated biomass is consistent with a Monod model for carbon fixation. Carbon dioxide produced by catabolism was found to be minimal. This rapid response of the bacteria to a hydrogen input and to subsequent CO₂ reduction at high efficiency are beneficial to achieving artificial photosynthesis for the storage of renewable energy.

Interfacing nature's catalytic machinery with synthetic materials for semi-artificial photosynthesis

Semi-artificial photosynthetic systems aim to overcome the limitations of natural and artificial photosynthesis while providing an opportunity to investigate their respective functionality. The progress and studies of these hybrid systems is the focus of this forward-looking perspective. In this Review, we discuss how enzymes have been interfaced with synthetic materials and employed for semi-artificial fuel production. In parallel, we examine how more complex living cellular systems can be recruited for in vivo fuel and chemical production in an approach where inorganic nanostructures are hybridized with photosynthetic and non-photosynthetic microorganisms. Side-by-side comparisons reveal strengths and limitations of enzyme- and microorganism-based hybrid systems, and how lessons extracted from studying enzyme hybrids can be applied to investigations of microorganism-hybrid devices. We conclude by putting semi-artificial photosynthesis in the context of its own ambitions and discuss how it can help address the grand challenges facing artificial systems for the efficient generation of solar fuels and chemicals.

Salinity-gradient energy driven microbial electrosynthesis of value-added chemicals from CO2 reduction

Biological conversion of CO₂ to value-added chemicals and biofuels has emerged as an attractive strategy to address the energy and environmental concerns caused by the over-reliance on fossil fuels. In this study, an innovative microbial reverse-electrodialysis electrolysis cell (MREC), which combines the strengths of reverse electrodialysis (RED) and microbial electrosynthesis technology platforms, was developed to achieve efficient CO₂-to-value chemicals bioconversion by using the salinity gradient energy as driven energy sources. In the MREC, maximum acetate and ethanol concentrations of 477.5 ± 33.2 and 46.2 ± 8.2 mg L^-1 were obtained at the cathode, catalyzed by Sporomusa ovata with production rates of 165.79 ± 11.52 and 25.11 ± 4.46 mmol m^-2 d^-1, respectively. Electron balance analysis indicates that 94.4 ± 3.9% of the electrons derived from wastewater and salinity gradient were recovered in acetate and ethanol. This work for the first time proved the potential of innovative MREC configuration has the potential as an efficient technology platform for simultaneous CO₂ capture and electrosynthesis of valuable chemicals.

Cytoprotective metal-organic frameworks for anaerobic bacteria

Culturing bacteria to produce desired chemicals has long been practiced in human history, and has recently being taken as a promising approach to sustainable energy when this process is driven by sunlight and fed by CO₂ as the only carbon source. Among these chemical-producing microbes are anaerobic bacteria, inherently susceptible to O₂ and reactive oxygen species that are inevitably generated on anodes. Here, we provide cytoprotection against such oxidative stress by wrapping bacteria with an artificial material, metal-organic frameworks (MOFs), which significantly enhances the lifetime of anaerobes in the presence of O₂, and maintains the continuous production of acetic acid from CO_2. The ultrathin nature of the MOF layer allows for cell reproduction without loss of this cytoprotective material.

We report a strategy to uniformly wrap Morella thermoacetica bacteria with a metal-organic framework (MOF) monolayer of nanometer thickness for cytoprotection in artificial photosynthesis. The catalytic activity of the MOF enclosure toward decomposition of reactive oxygen species (ROS) reduces the death of strictly anaerobic bacteria by fivefold in the presence of 21% O₂, and enables the cytoprotected bacteria to continuously produce acetate from CO₂ fixation under oxidative stress. The high definition of the MOF–bacteria interface involving direct bonding between phosphate units on the cell surface and zirconium clusters on MOF monolayer, provides for enhancement of life throughout reproduction. The dynamic nature of the MOF wrapping allows for cell elongation and separation, including spontaneous covering of the newly grown cell surface. The open-metal sites on the zirconium clusters lead to 600 times more efficient ROS decomposition compared with zirconia nanoparticles.

Water Splitting-Biosynthetic Hybrid System for CO2 Conversion using Nickel Nanoparticles Embedded in N-Doped Carbon Nanotubes

CO₂ reduction has drawn increasing attention owing to the concern of global warming. Water splitting-biosynthetic hybrid systems are novel and efficient approaches for CO₂ conversion. Intimate coupling of electrocatalysts and biosynthesis requires the catalysts possess both high catalytic performance and excellent biocompatibility, which is a bottleneck of developing such catalysts. Here, a complex of Ni nanoparticles embedded in N-doped carbon nanotubes (Ni@N-C) is synthesized as a hydrogen evolution reaction electrocatalyst and is coupled with a hydrogen oxidizing autotroph, Cupriavidus necator H16, to convert CO₂ to poly-β-hydroxybutyrate. In Ni@N-C, the Ni nanoparticles are encapsulated in N-C nanotubes, which prevents bacteria from direct contact with Ni and inhibits Ni²⁺ leaching. As a result, Ni@N-C exhibits excellent biocompatibility and stability. This work demonstrates that electrocatalysts and biosynthesis can be intimately coupled through rational catalyst design.

Innovative Strategies for Electrocatalytic Water Splitting

Electrocatalytic water splitting driven by renewable energy input to produce clean H₂ has been widely viewed as a promising strategy of the future energy portfolio. Currently, the state-of-the-art electrocatalysts for water splitting in acidic solutions are IrO₂ or RuO₂ for the O₂ evolution reaction (OER) and Pt for the H₂ evolution reaction (HER). Realization of large-scale H₂ production from water splitting requires competent nonprecious electrocatalysts. Despite the advances of decades in this field, several challenges still exist and need to be overcome: (1) Most efforts in the design of nonprecious electrocatalysts have focused on developing HER catalysts for acidic conditions but OER catalysts for alkaline conditions owing to their thermodynamic convenience, potentially resulting in incompatible integration of the two types of catalysts and thus inferior overall performance. (2) In conventional water electrolysis, HER and OER are strictly coupled and therefore H₂ and O₂ are produced simultaneously, which may lead to explosive H₂/O₂ mixing due to gas crossover. Meanwhile, the coexistence of H₂, O₂, and electrocatalysts could produce reactive oxygen species that might shorten the lifetime of an electrolyzer. (3) The HER rate is often limited by that of OER due to the more sluggish kinetics of the latter, which lowers the overall energy conversion efficiency. Moreover, the product of OER, O₂, is not highly valuable. (4) It remains challenging to develop efficient and low-cost H₂ storage and transport systems for the future H₂ economy. In this Account, we describe recent progress in innovative strategies to address the aforementioned four challenges in conventional water electrolysis. These novel strategies include (1) overall water electrolysis based on bifunctional nonprecious electrocatalysts (or precursors) to drive both HER and OER under the same conditions, (2) decoupled water electrolysis achieved by redox mediators for temporally and spatially separating HER from OER, (3) hybrid water electrolysis by integrating thermodynamically more favorable organic upgrading reactions to replace OER, and (4) tandem water electrolysis by utilizing biocatalysts for converting the in situ produced H₂ with foreign compounds (e.g., CO₂ and N₂) to more valuable products. Finally, the remaining challenges and future perspectives are also presented. We hope this Account will function as a momentum call for more endeavors into the development of advanced electrocatalytic systems and novel strategies for practicable H₂ production from water as well as the electrocatalytic upgrading of diverse organic compounds.

Nanoscale membranes that chemically isolate and electronically wire up the abiotic/biotic interface

By electrochemically coupling microbial and abiotic catalysts, bioelectrochemical systems such as microbial electrolysis cells and microbial electrosynthesis systems synthesize energy-rich chemicals from energy-poor precursors with unmatched efficiency. However, to circumvent chemical incompatibilities between the microbial cells and inorganic materials that result in toxicity, corrosion, fouling, and efficiency-degrading cross-reactions between oxidation and reduction environments, bioelectrochemical systems physically separate the microbial and inorganic catalysts by macroscopic distances, thus introducing ohmic losses, rendering these systems impractical at scale. Here we electrochemically couple an inorganic catalyst, a SnO₂ anode, with a microbial catalyst, Shewanella oneidensis, via a 2-nm-thick silica membrane containing -CN and -NO₂ functionalized p-oligo(phenylene vinylene) molecular wires. This membrane enables electron flow at 0.51 μA cm^-2 from microbial catalysts to the inorganic anode, while blocking small molecule transport. Thus the modular architecture avoids chemical incompatibilities without ohmic losses and introduces an immense design space for scale up of bioelectrochemical systems.

Dual-Function Electrocatalytic and Macroporous Hollow-Fiber Cathode for Converting Waste Streams to Valuable Resources Using Microbial Electrochemical Systems

Dual-function electrocatalytic and macroporous hollow-fiber cathodes are recently proposed as promising advanced material for maximizing the conversion of waste streams such as wastewater and waste CO₂ to valuable resources (e.g., clean freshwater, energy, value-added chemicals) in microbial electrochemical systems. The first part of this progress report reviews recent developments in this type of cathode architecture for the simultaneous recovery of clean freshwater and energy from wastewater. Critical insights are provided on suitable materials for fabricating these cathodes, as well as addressing some challenges in the fabrication process with proposed strategies to overcome them. The second and complementary part of the progress report highlights how the unique features of this cathode architecture can solve one of the intrinsic bottlenecks (gas-liquid mass transfer limitation) in the application of microbial electrochemical systems for CO₂ reduction to value-added products. Strategies to further improve the availability of CO₂ to microbial catalysts on the cathode are proposed. The importance of understanding microbe-cathode interactions, as well as electron transfer mechanisms at the cathode-cell and cell-cell interface to better design dual-function macroporous hollow-fiber cathodes, is critically discussed with insights on how the choice of material is important in facilitating direct electron transfer versus mediated electron transfer.