51
|
Chen W, Zhang X, Zhao S, Huang J, Guo Z. Slippery magnetic track inducing droplet and bubble manipulation. Chem Commun (Camb) 2022; 58:1207-1210. [PMID: 34982074 DOI: 10.1039/d1cc06369c] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
It is difficult for traditional droplet manipulation to combine transportation and rapid capture of droplets on an inclined surface. In this work, a slippery magnetic track (SMT) is presented to manipulate droplets and bubbles in a magnetic field. By changing the direction of the magnetic field, the transitions from non-pinning to pinning states on the SMT can be achieved. Through the SMT surface, it is possible to capture and release droplets and bubbles in the vertical direction. The detailed theoretical and experimental studies of droplet and bubble manipulation are discussed. This work demonstrates the versatility of magnetic manipulation, including the transition of droplet trajectory and bubble removal, which will facilitate the research of intelligent interfaces in energy transmission, drug transport and micro engineering.
Collapse
Affiliation(s)
- Wei Chen
- Hubei Collaborative Innovation Centre for Advanced Organic Chemical Materials and Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, P. R. China. .,State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, P. R. China.
| | - Xiaolin Zhang
- Hubei Collaborative Innovation Centre for Advanced Organic Chemical Materials and Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, P. R. China.
| | - Siyang Zhao
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, P. R. China.
| | - Jinxia Huang
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, P. R. China.
| | - Zhiguang Guo
- Hubei Collaborative Innovation Centre for Advanced Organic Chemical Materials and Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, P. R. China. .,State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, P. R. China.
| |
Collapse
|
52
|
Zhu P, Wang L. Microfluidics-Enabled Soft Manufacture of Materials with Tailorable Wettability. Chem Rev 2021; 122:7010-7060. [PMID: 34918913 DOI: 10.1021/acs.chemrev.1c00530] [Citation(s) in RCA: 21] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
Abstract
Microfluidics and wettability are interrelated and mutually reinforcing fields, experiencing synergistic growth. Surface wettability is paramount in regulating microfluidic flows for processing and manipulating fluids at the microscale. Microfluidics, in turn, has emerged as a versatile platform for tailoring the wettability of materials. We present a critical review on the microfluidics-enabled soft manufacture (MESM) of materials with well-controlled wettability and their multidisciplinary applications. Microfluidics provides a variety of liquid templates for engineering materials with exquisite composition and morphology, laying the foundation for precisely controlling the wettability. Depending on the degree of ordering, liquid templates are divided into individual droplets, one-dimensional (1D) arrays, and two-dimensional (2D) or three-dimensional (3D) assemblies for the modular fabrication of microparticles, microfibers, and monolithic porous materials, respectively. Future exploration of MESM will enrich the diversity of chemical composition and physical structure for wettability control and thus markedly broaden the application horizons across engineering, physics, chemistry, biology, and medicine. This review aims to systematize this emerging yet robust technology, with the hope of aiding the realization of its full potential.
Collapse
Affiliation(s)
- Pingan Zhu
- Department of Mechanical Engineering, City University of Hong Kong, Hong Kong, China
| | - Liqiu Wang
- Department of Mechanical Engineering, The University of Hong Kong, Hong Kong, China
| |
Collapse
|
53
|
He Y, Yu Y, Yang Y, Gu Y, Mao T, Shen Y, Liu Q, Liu R, Ding J. Design and aligner-assisted fast fabrication of a microfluidic platform for quasi-3D cell studies on an elastic polymer. Bioact Mater 2021; 15:288-304. [PMID: 35356817 PMCID: PMC8935092 DOI: 10.1016/j.bioactmat.2021.12.010] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2021] [Revised: 11/24/2021] [Accepted: 12/11/2021] [Indexed: 12/30/2022] Open
Abstract
While most studies of mechanical stimulation of cells are focused on two-dimensional (2D) and three-dimensional (3D) systems, it is rare to study the effects of cyclic stretching on cells under a quasi-3D microenvironment as a linkage between 2D and 3D. Herein, we report a new method to prepare an elastic membrane with topographic microstructures and integrate the membrane into a microfluidic chip. The fabrication difficulty lay not only in the preparation of microstructures but also in the alignment and bonding of the patterned membrane to other layers. To resolve the problem, we designed and assembled a fast aligner that is cost-effective and convenient to operate. To enable quasi-3D microenvironment of cells, we fabricated polydimethylsiloxane (PDMS) microwell arrays (formed by micropillars of a few microns in diameter) with the microwell diameters close to the cell sizes. An appropriate plasma treatment was found to afford a coating-free approach to enable cell adhesion on PDMS. We examined three types of cells in 2D, quasi-3D, and 3D microenvironments; the cell adhesion results showed that quasi-3D cells behaved between 2D and 3D cells. We also constructed transgenic human mesenchymal stem cells (hMSCs); under cyclic stretching, the visualizable live hMSCs in microwells were found to orientate differently from in a 3D Matrigel matrix and migrate differently from on a 2D flat plate. This study not only provides valuable tools for microfabrication of a microfluidic device for cell studies, but also inspires further studies of the topological effects of biomaterials on cells. A microfluidic platform for quasi-3D cell studies was presented as a linkage between 2D and 3D cell-material research systems. The fabrication difficulty was overcome by designing an effective aligner that can be easily assembled. Cell behaviors can be enhanced with a proper quasi-3D biomaterial microenvironment. A new transgenic cell line and systematic 3D approaches were developed to visualize and digitalize the quasi-3D cells.
Collapse
Affiliation(s)
- Yingning He
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai, 200438, China
| | - Yue Yu
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai, 200438, China
| | - Yuqian Yang
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai, 200438, China
| | - Yexin Gu
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai, 200438, China
| | - Tianjiao Mao
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai, 200438, China
| | - Yang Shen
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai, 200438, China
| | - Qiong Liu
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai, 200438, China
- Translational Research Institute of Brain and Brain-Like Intelligence, Shanghai Fourth People's Hospital, School of Medicine, Tongji University, Shanghai, 200434, China
| | - Ruili Liu
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai, 200438, China
| | - Jiandong Ding
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai, 200438, China
- Corresponding author.
| |
Collapse
|
54
|
Wang J, Zhu Z, Liu P, Yi S, Peng L, Yang Z, Tian X, Jiang L. Magneto-Responsive Shutter for On-Demand Droplet Manipulation. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2021; 8:e2103182. [PMID: 34693657 PMCID: PMC8655205 DOI: 10.1002/advs.202103182] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/26/2021] [Revised: 08/20/2021] [Indexed: 05/05/2023]
Abstract
Magnetically responsive structured surfaces enabling multifunctional droplet manipulation are of significant interest in both scientific and engineering research. To realize magnetic actuation, current strategies generally employ well-designed microarrays of high-aspect-ratio structure components (e.g., microcilia, micropillars, and microplates) with incorporated magnetism to allow reversible bending deformation driven by magnets. However, such magneto-responsive microarray surfaces suffer from highly restricted deformation range and poor control precision under magnetic field, restraining their droplet manipulation capability. Herein, a novel magneto-responsive shutter (MRS) design composed of arrayed microblades connected to a frame is developed for on-demand droplet manipulation. The microblades can perform two dynamical transformation operations, including reversible swing and rotation, and significantly, the transformation can be precisely controlled over a large rotation range with the highest rotation angle up to 3960°. Functionalized MRSs based on the above design, including Janus-MRS, superhydrophobic MRS (SHP-MRS) and lubricant infused slippery MRS (LIS-MRS), can realize a wide range of droplet manipulations, ranging from switchable wettability, directional droplet bounce, droplet distribution, and droplet merging, to continuous droplet transport along either straight or curved paths. MRS provides a new paradigm of using swing/rotation topographic transformation to replace conventional bending deformation for highly efficient and on-demand multimode droplet manipulation under magnetic actuation.
Collapse
Affiliation(s)
- Jian Wang
- Guangdong Provincial Key Laboratory of Sensor Technology and Biomedical Instrument, School of Biomedical Engineering, Sun Yat-sen University, Shenzhen, 518107, China
| | - Zhengxu Zhu
- Guangdong Provincial Key Laboratory of Sensor Technology and Biomedical Instrument, School of Biomedical Engineering, Sun Yat-sen University, Shenzhen, 518107, China
| | - Pengfei Liu
- Guangdong Provincial Key Laboratory of Sensor Technology and Biomedical Instrument, School of Biomedical Engineering, Sun Yat-sen University, Shenzhen, 518107, China
| | - Shengzhu Yi
- Guangdong Provincial Key Laboratory of Sensor Technology and Biomedical Instrument, School of Biomedical Engineering, Sun Yat-sen University, Shenzhen, 518107, China
| | - Lelun Peng
- Guangdong Provincial Key Laboratory of Sensor Technology and Biomedical Instrument, School of Biomedical Engineering, Sun Yat-sen University, Shenzhen, 518107, China
| | - Zhilun Yang
- Guangdong Provincial Key Laboratory of Sensor Technology and Biomedical Instrument, School of Biomedical Engineering, Sun Yat-sen University, Shenzhen, 518107, China
| | - Xuelin Tian
- State Key Laboratory of Optoelectronic Materials and Technologies, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou, 510006, China
- Key Laboratory for Polymeric Composite and Functional Materials of Ministry of Education, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, Sun Yat-sen University, Guangzhou, 510006, China
| | - Lelun Jiang
- Guangdong Provincial Key Laboratory of Sensor Technology and Biomedical Instrument, School of Biomedical Engineering, Sun Yat-sen University, Shenzhen, 518107, China
| |
Collapse
|
55
|
Guo J, Yu Y, Zhang H, Sun L, Zhao Y. Elastic MXene Hydrogel Microfiber-Derived Electronic Skin for Joint Monitoring. ACS APPLIED MATERIALS & INTERFACES 2021; 13:47800-47806. [PMID: 34590841 DOI: 10.1021/acsami.1c10311] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/18/2023]
Abstract
Effective and timely joint monitoring has been a significantly vital research direction in human healthcare. As an emerging technology, flexible electronics provides more possibilities and applicabilities for practical sensing and signal transmission. Here, we provide novel elastic MXene microfibers of controllable morphologies at a microscale through microfluidic technology for actual joint motion monitoring. Double-network hydrogels including covalently cross-linking polyacrylamide and ionically cross-linking alginate were chosen for superelasticity. For the improvement of the electrical conductivity of superelastic hydrogel microfibers, MXene was selected to mix with them. By introducing the cross-linker to the outer channel, microfibers with controllable diameters along with high electrical conductivities and tensile properties could be fabricated successfully. The practical value of the synthesized microfibers in joint movement sensing has been demonstrated by acting as the element of new motion sensors. Based on these features, it is believed that these elastic MXene hydrogel microfibers have high potential for rapid sensing and diagnosis of joint diseases.
Collapse
Affiliation(s)
- Jiahui Guo
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
- Department of Clinical Laboratory, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing 210008, China
| | - Yunru Yu
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| | - Han Zhang
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
- Department of Clinical Laboratory, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing 210008, China
| | - Lingyu Sun
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
- Department of Clinical Laboratory, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing 210008, China
| | - Yuanjin Zhao
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
- Department of Clinical Laboratory, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing 210008, China
- State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai 200433, China
| |
Collapse
|
56
|
Sun L, Guo J, Chen H, Zhang D, Shang L, Zhang B, Zhao Y. Tailoring Materials with Specific Wettability in Biomedical Engineering. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2021; 8:e2100126. [PMID: 34369090 PMCID: PMC8498887 DOI: 10.1002/advs.202100126] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/12/2021] [Revised: 06/22/2021] [Indexed: 05/02/2023]
Abstract
As a fundamental feature of solid surfaces, wettability is playing an increasingly important role in our daily life. Benefitting from the inspiration of biological paradigms and the development in manufacturing technology, numerous wettability materials with elaborately designed surface topology and chemical compositions have been fabricated. Based on these advances, wettability materials have found broad technological implications in various fields ranging from academy, industry, agriculture to biomedical engineering. Among them, the practical applications of wettability materials in biomedical-related fields are receiving remarkable researches during the past decades because of the increasing attention to healthcare. In this review, the research progress of materials with specific wettability is discussed. After briefly introducing the underlying mechanisms, the fabrication strategies of artificial materials with specific wettability are described. The emphasis is put on the application progress of wettability biomaterials in biomedical engineering. The prospects for the future trend of wettability materials are also presented.
Collapse
Affiliation(s)
- Lingyu Sun
- Institute of Translational MedicineDepartment of RadiologyThe Affiliated Drum Tower Hospital of Nanjing University Medical SchoolNanjing210002China
- State Key Laboratory of BioelectronicsSchool of Biological Science and Medical EngineeringSoutheast UniversityNanjing210096China
| | - Jiahui Guo
- State Key Laboratory of BioelectronicsSchool of Biological Science and Medical EngineeringSoutheast UniversityNanjing210096China
| | - Hanxu Chen
- State Key Laboratory of BioelectronicsSchool of Biological Science and Medical EngineeringSoutheast UniversityNanjing210096China
| | - Dagan Zhang
- Institute of Translational MedicineDepartment of RadiologyThe Affiliated Drum Tower Hospital of Nanjing University Medical SchoolNanjing210002China
| | - Luoran Shang
- Zhongshan‐Xuhui Hospitalthe Shanghai Key Laboratory of Medical EpigeneticsInstitutes of Biomedical SciencesFudan UniversityShanghai200032China
| | - Bing Zhang
- Institute of Translational MedicineDepartment of RadiologyThe Affiliated Drum Tower Hospital of Nanjing University Medical SchoolNanjing210002China
| | - Yuanjin Zhao
- Institute of Translational MedicineDepartment of RadiologyThe Affiliated Drum Tower Hospital of Nanjing University Medical SchoolNanjing210002China
- State Key Laboratory of BioelectronicsSchool of Biological Science and Medical EngineeringSoutheast UniversityNanjing210096China
| |
Collapse
|
57
|
Guo M, Li Q, Gao B, He B. One-step 3D printed intelligent silk fibroin artificial skin with built-in electronics and microfluidics. Analyst 2021; 146:5934-5941. [PMID: 34570843 DOI: 10.1039/d1an01257f] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
Abstract
The rapid fabrication of artificial skin patches with multiple functions has attracted great attention in various research fields, such as personal health monitoring, tissue engineering and robotics. Intertwined-network structures (blood vessel, lymphatic and nerve networks) play a key role in endowing skin with multiple functions. Thus, considerable efforts have been devoted to fabricating artificial skin patches with mimetic internal channels. Here, we present a one-step 3D printed intelligent silk fibroin artificial skin (i-skin) with built-in electronics and microfluidics. By simultaneously extruding functional materials in polyurethane-silk fibroin precursor using a 3D bioprinter, the i-skin and its internal channels can be fabricated within one step. Photonic crystals (PCs) were integrated into the microfluidic channel, enabling the i-skin to sense multiple biomarkers. Moreover, the printed electronics give the i-skin remarkable conductivity, endowing the i-skin with the capability of sensitive motion sensing. Notably, by using the built-in electronics and PC-integrated microfluidics, sensitive sensing of motions and specific cardiac biomarkers can be achieved simultaneously in the i-skin, indicating the remarkable prospects of the printed multi-functional i-skin in health care-related biomedical fields.
Collapse
Affiliation(s)
- Maoze Guo
- School of Pharmaceutical Sciences, Nanjing Tech University, Nanjing 211816, China.
| | - Qian Li
- School of Pharmaceutical Sciences, Nanjing Tech University, Nanjing 211816, China.
| | - Bingbing Gao
- School of Pharmaceutical Sciences, Nanjing Tech University, Nanjing 211816, China.
| | - Bingfang He
- School of Pharmaceutical Sciences, Nanjing Tech University, Nanjing 211816, China.
| |
Collapse
|
58
|
Liu C, Sun Y, Huanng J, Guo Z, Liu W. External-field-induced directional droplet transport: A review. Adv Colloid Interface Sci 2021; 295:102502. [PMID: 34390884 DOI: 10.1016/j.cis.2021.102502] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/02/2021] [Revised: 07/18/2021] [Accepted: 08/02/2021] [Indexed: 02/08/2023]
Abstract
Directional transport of fluids is crucial for vital activities of organisms and numerous industrial applications. This process has garnered widespread research attention due to the wide breadth of flexible applications such as medical diagnostics, drug delivery, and digital microfluidics. The rational design of functional surfaces that can achieve the subtle control of liquid behavior. Previous studies were mainly dependent on the special asymmetric structures, which inevitably have the problem of slow transport speed and short distance. To improve controllability, researchers have attempted to use external fields, such as thermal, light, electric fields, and magnetic fields, to achieve controllable droplet transport. On the fundamental side, much of their widespread applicably is due to the degree of control over droplet transport. This review provides an overview of recent progress in the last three years toward the transport of droplets with different mechanisms induced by various external stimuli, including light, electric, thermal, and magnetic field. First, the relevant basic theory and typical induced gradient for directional liquid transport are illustrated. We will then review the latest advances in the external-field-induced directional transport. Moreover, the most emerging applications such as digital microfluidics, harvesting of energy and water, heat transfer, and oil/water separation are also presented. Finally, we will outline possible future perspectives to attract more researchers interest and promote the development of this field.
Collapse
|
59
|
Liu Y, Sun L, Zhang H, Shang L, Zhao Y. Microfluidics for Drug Development: From Synthesis to Evaluation. Chem Rev 2021; 121:7468-7529. [PMID: 34024093 DOI: 10.1021/acs.chemrev.0c01289] [Citation(s) in RCA: 72] [Impact Index Per Article: 24.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Abstract
Drug development is a long process whose main content includes drug synthesis, drug delivery, and drug evaluation. Compared with conventional drug development procedures, microfluidics has emerged as a revolutionary technology in that it offers a miniaturized and highly controllable environment for bio(chemical) reactions to take place. It is also compatible with analytical strategies to implement integrated and high-throughput screening and evaluations. In this review, we provide a comprehensive summary of the entire microfluidics-based drug development system, from drug synthesis to drug evaluation. The challenges in the current status and the prospects for future development are also discussed. We believe that this review will promote communications throughout diversified scientific and engineering communities that will continue contributing to this burgeoning field.
Collapse
Affiliation(s)
- Yuxiao Liu
- Department of Rheumatology and Immunology, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing 210008, China.,State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| | - Lingyu Sun
- Department of Rheumatology and Immunology, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing 210008, China.,State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| | - Hui Zhang
- Department of Rheumatology and Immunology, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing 210008, China.,State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| | - Luoran Shang
- Zhongshan-Xuhui Hospital, and the Shanghai Key Laboratory of Medical Epigenetics, the International Co-laboratory of Medical Epigenetics and Metabolism, Ministry of Science and Technology, Institutes of Biomedical Sciences, Fudan University, Shanghai, China
| | - Yuanjin Zhao
- Department of Rheumatology and Immunology, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing 210008, China.,State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| |
Collapse
|
60
|
Li S, Fan Y, Liu Y, Niu S, Han Z, Ren L. Smart Bionic Surfaces with Switchable Wettability and Applications. JOURNAL OF BIONIC ENGINEERING 2021; 18:473-500. [PMID: 34131422 PMCID: PMC8193597 DOI: 10.1007/s42235-021-0038-7] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
In order to satisfy the needs of different applications and more complex intelligent devices, smart control of surface wettability will be necessary and desirable, which gradually become a hot spot and focus in the field of interface wetting. Herein, we review interfacial wetting states related to switchable wettability on superwettable materials, including several classical wetting models and liquid adhesive behaviors based on the surface of natural creatures with special wettability. This review mainly focuses on the recent developments of the smart surfaces with switchable wettability and the corresponding regulatory mechanisms under external stimuli, which is mainly governed by the transformation of surface chemical composition and geometrical structures. Among that, various external stimuli such as physical stimulation (temperature, light, electric, magnetic, mechanical stress), chemical stimulation (pH, ion, solvent) and dual or multi-triggered stimulation have been sought out to realize the regulation of surface wettability. Moreover, we also summarize the applications of smart surfaces in different fields, such as oil/water separation, programmable transportation, anti-biofouling, detection and delivery, smart soft robotic etc. Furthermore, current limitations and future perspective in the development of smart wetting surfaces are also given. This review aims to offer deep insights into the recent developments and responsive mechanisms in smart biomimetic surfaces with switchable wettability under external various stimuli, so as to provide a guidance for the design of smart surfaces and expand the scope of both fundamental research and practical applications.
Collapse
Affiliation(s)
- Shuyi Li
- Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun, 130022 China
| | - Yuyan Fan
- Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun, 130022 China
| | - Yan Liu
- Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun, 130022 China
| | - Shichao Niu
- Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun, 130022 China
| | - Zhiwu Han
- Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun, 130022 China
| | - Luquan Ren
- Key Laboratory of Bionic Engineering (Ministry of Education), Jilin University, Changchun, 130022 China
| |
Collapse
|
61
|
Zhu P, Wang Y, Chu H, Wang L. Superhydrophobicity preventing surface contamination as a novel strategy against COVID-19. J Colloid Interface Sci 2021; 600:613-619. [PMID: 34034121 PMCID: PMC8110320 DOI: 10.1016/j.jcis.2021.05.031] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/12/2021] [Revised: 04/12/2021] [Accepted: 05/06/2021] [Indexed: 01/01/2023]
Abstract
Surface contact with virus is ubiquitous in the transmission pathways of respiratory diseases such as Coronavirus Disease 2019 (COVID-19), by which contaminated surfaces are infectious fomites intensifying the transmission of the disease. To date, the influence of surface wettability on fomite formation remains elusive. Here, we report that superhydrophobicity prevents the attachment of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) on surfaces by repelling virus-laden droplets. Compared to bare surfaces, superhydrophobic (SHPB) surfaces exhibit a significant reduction in SARS-CoV-2 attachment of up to 99.99995%. We identify the vital importance of solid-liquid adhesion in dominating viral attachment, where the viral activity (N) is proportional to the cube of solid-liquid adhesion (A), N ∝ A3. Our results predict that a surface would be practically free of SARS-CoV-2 deposition when solid-liquid adhesion is ≤1 mN. Engineering surfaces with superhydrophobicity would open an avenue for developing a general approach to preventing fomite formation against the COVID-19 pandemic and future ones.
Collapse
Affiliation(s)
- Pingan Zhu
- Department of Mechanical Engineering, City University of Hong Kong, Hong Kong, China; Department of Mechanical Engineering, the University of Hong Kong, Hong Kong, China; HKU-Zhejiang Institute of Research and Innovation (HKU-ZIRI), 311300 Hangzhou, China
| | - Yixin Wang
- Department of Microbiology, Li Ka Shing Faculty of Medicine, the University of Hong Kong, Hong Kong, China
| | - Hin Chu
- Department of Microbiology, Li Ka Shing Faculty of Medicine, the University of Hong Kong, Hong Kong, China.
| | - Liqiu Wang
- Department of Mechanical Engineering, the University of Hong Kong, Hong Kong, China; HKU-Zhejiang Institute of Research and Innovation (HKU-ZIRI), 311300 Hangzhou, China.
| |
Collapse
|
62
|
Deng K, Du P, Liu K, Tao X, Harati J, Jhang JW, Kim J, Wang PY. Programming Colloidal Self-Assembled Patterns (cSAPs) into Thermo-Responsible Hybrid Surfaces for Controlling Human Stem Cells and Macrophages. ACS APPLIED MATERIALS & INTERFACES 2021; 13:18563-18580. [PMID: 33861071 DOI: 10.1021/acsami.1c02969] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Hybrid surfaces with tunable topography, chemistry, and stiffness have potential to rebuild native extracellular matrix (ECM) and manipulate cell behavior in vitro. However, the fabrication of controllable hybrid surfaces is still challenging. In this study, colloidal self-assembly technology was used to program particles into highly ordered structures with hybrid chemistry and stiffness at biointerfaces. These colloidal self-assembled patterns (cSAPs), including unary, binary, and ternary cSAPs, composed of silicon (Si), polystyrene (PS), and/or poly(N-isopropylacrylamide) (pNIPAM) nanogels (PNGs), were fabricated using either coassembly or layer-by-layer (LBL) methods. The selected binary cSAPs (i.e., PS/PNG and PNG/PS) have a tunable surface topography and wettability between 25 and 37 °C; thus, they can be used as dynamic cell culture substrates. Human adipose-derived mesenchymal stem cells (hASCs), bone marrow-derived mesenchymal stem cells (hBMSCs), and macrophages (THP-1) were investigated on these hybrid cSAPs under a static or dynamic system. The results showed that hybrid cSAPs significantly influenced the focal adhesions, cell morphology, cell migration, and gene expressions of stem cells. In general, stem cells had more vinculin puncta, smaller spreading size, and faster migration speed than the TCPS control. Hybrid cSAPs up-regulated gene expressions of focal adhesion kinase (FAK) and chondrocytes (AGG and SOX9) under static culture, while they also up-regulated osteocytes (COL1 and RUNX2) under dynamic culture. THP-1 macrophages were at M0 state on all cSAPs under static culture. However, cells became sensitive under dynamic culture. For example, some M1 genes (i.e., IL6, CD68, and TNFα) and M2 genes (i.e., IL10 and CD206) were down-regulated, while other M1 genes (i.e., IL1β) and M2 genes (i.e., TGF-β and IL1ra) were up-regulated, depending on the particle combinations. In conclusion, new hybrid cSAPs with thermoresponsive surface properties are versatile materials for stem cells and macrophages manipulation.
Collapse
Affiliation(s)
- Ke Deng
- Shenzhen Key Laboratory of Biomimetic Materials and Cellular Immunomodulation, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong 518055, China
| | - Ping Du
- Shenzhen Key Laboratory of Biomimetic Materials and Cellular Immunomodulation, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong 518055, China
| | - Kun Liu
- Shenzhen Key Laboratory of Biomimetic Materials and Cellular Immunomodulation, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong 518055, China
| | - Xuelian Tao
- Shenzhen Key Laboratory of Biomimetic Materials and Cellular Immunomodulation, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong 518055, China
| | - Javad Harati
- Shenzhen Key Laboratory of Biomimetic Materials and Cellular Immunomodulation, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong 518055, China
| | - Jhe-Wei Jhang
- Shenzhen Key Laboratory of Biomimetic Materials and Cellular Immunomodulation, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong 518055, China
- University of Chinese Academy of Sciences, Beijing 100049, China
| | - Jua Kim
- Shenzhen Key Laboratory of Biomimetic Materials and Cellular Immunomodulation, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong 518055, China
| | - Peng-Yuan Wang
- Shenzhen Key Laboratory of Biomimetic Materials and Cellular Immunomodulation, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong 518055, China
- Department of Chemistry and Biotechnology, School of Science, Swinburne University of Technology, Hawthorn, Victoria 3122, Australia
| |
Collapse
|
63
|
Zhu Z, Chen Y, Xu Z, Yu Z, Luo X, Zhou J, Tian Y, Jiang L. Super-spreading on superamphiphilic micro-organized nanochannel anodic aluminum oxide surfaces for heat dissipation. iScience 2021; 24:102334. [PMID: 33855283 PMCID: PMC8027538 DOI: 10.1016/j.isci.2021.102334] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/21/2021] [Revised: 02/25/2021] [Accepted: 03/16/2021] [Indexed: 12/31/2022] Open
Abstract
Nature-inspired superamphiphilic surfaces have drawn tremendous attention owing to its extreme liquid-loving behaviors. Herein, a micro-organized nano-channel (Mo-Na) superamphiphilic anodic aluminum oxide (AAO) surface with long-lasting superamphiphilic property is prepared by a facile one-step anodization method with controllable temperature change. Analysis of dynamic wetting behaviors on superamphiphilic Mo-Na AAO surfaces for various liquids reveals that the spreading factor is in negative correlation with the surface tension and liquid polarity. Detailed observation of the three-phase contact line shows a micro-scale capillary film on superamphiphilic Mo-Na AAO surfaces, which results from the horizontal component of the capillary force. Taking advantage of the superamphiphilic property, water droplets can spread completely on these Mo-Na AAO surfaces within a short time, which can be applied for efficient heat dissipation. Moreover, the unique AAO surface with Mo-Na structures also offers an effective template for future efforts in AAO-based composite devices.
Collapse
Affiliation(s)
- Zhongpeng Zhu
- Key Laboratory of Bio-inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing 100191, P. R. China
| | - Yupeng Chen
- Key Laboratory of Bio-inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing 100191, P. R. China
| | - Zhe Xu
- Key Laboratory of Bio-inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing 100191, P. R. China
| | - Zhenwei Yu
- Key Laboratory of Bio-inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing 100191, P. R. China
| | - Xianfeng Luo
- College of Chemical and Environmental Engineering, Harbin University of Science and Technology, Xuefu Road, No. 52, Harbin 150080, Heilongjiang, PR China
| | - Jiajia Zhou
- Key Laboratory of Bio-inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing 100191, P. R. China
| | - Ye Tian
- Key Laboratory of Bioinspired Smart Interfacial Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, P. R. China
- University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Lei Jiang
- Key Laboratory of Bio-inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing 100191, P. R. China
- Key Laboratory of Bioinspired Smart Interfacial Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, P. R. China
- University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| |
Collapse
|
64
|
Chen G, Hao B, Wang Y, Wang Y, Xiao H, Li H, Huang X, Shi B. Insights into Regional Wetting Behaviors of Amphiphilic Collagen for Dual Separation of Emulsions. ACS APPLIED MATERIALS & INTERFACES 2021; 13:18209-18217. [PMID: 33845568 DOI: 10.1021/acsami.0c22601] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Industrial manufacture generates a huge quantity of emulsion wastewater, which causes serious threats to the aquatic ecosystems. Water-in-oil (W/O) and oil-in-water (O/W) emulsions are two major types of emulsions discharged by industries. However, dual separation of W/O and O/W emulsions remains a challenging issue due to the contradictory permselectivity for separating the two emulsions. In the present investigation, the amphiphilicity-derived regional wetting mechanism of water and oil on the amphiphilic collagen fibers was revealed based on the combination of numerous experiments and molecular dynamics (MD) simulations. Electrostatic interactions and van der Waals force were manifested to be the driving forces of regional wetting in the hydrophilic and hydrophobic regions, respectively. The regional wetting endowed amphiphilic collagen fibers with underwater oleophobicity and underoil hydrophilicity, which enabled dual separation of emulsions by selectively retaining the dispersed water phase of W/O emulsions in the hydrophilic regions while the dispersed oil phase of O/W emulsions in the hydrophobic regions. The achieved separation efficiency was higher than 99.98%, and the flux reached 3337.6 L m-2 h-1. Initial wetting status significantly affects the regional wetting-enabled dual separation. Based on the MD simulations, amphiphilic intramolecular conformations of tropocollagen were suggested to be the origins of regional wetting on collagen fibers. Our findings may pave the way for developing high-performance dual separation materials that are promising to be utilized for the practical treatment of emulsion wastewater.
Collapse
Affiliation(s)
- Guangyan Chen
- National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu 610065, P. R. China
| | - Baicun Hao
- National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu 610065, P. R. China
| | - Yujia Wang
- National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu 610065, P. R. China
| | - Yanan Wang
- National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu 610065, P. R. China
| | - Hanzhong Xiao
- National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu 610065, P. R. China
| | - Huifang Li
- National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu 610065, P. R. China
| | - Xin Huang
- National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu 610065, P. R. China
| | - Bi Shi
- National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu 610065, P. R. China
| |
Collapse
|
65
|
Zhang C, Adera S, Aizenberg J, Chen Z. Why Are Water Droplets Highly Mobile on Nanostructured Oil-Impregnated Surfaces? ACS APPLIED MATERIALS & INTERFACES 2021; 13:15901-15909. [PMID: 33754694 DOI: 10.1021/acsami.1c01649] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Porous lubricated surfaces (aka slippery liquid-infused porous surfaces, SLIPS) have been demonstrated to repel various liquids. The origin of this repellency, however, is not fully understood. By using surface-sensitive sum frequency generation vibrational spectroscopy, we characterized the water/oil interface of a water droplet residing on (a) an oil-impregnated nanostructured surface (SLIPS) and (b) the same oil layer without the underlying nanostructures. Different from water molecules in contact with bulk oil without nanostructures, droplets on SLIPS adopt a molecular orientation that is predominantly parallel to the water/oil interface, leading to weaker hydrogen bonding interactions between water droplets and the lubrication film, giving SLIPS their water repellency. Our results demonstrate that the molecular interactions between two contacting liquids can be manipulated by the implementation of nanostructured substrates. The results also offer the molecular principles for controlling nanostructure to reduce oil depletion-one of the limitations and major concerns of SLIPS.
Collapse
Affiliation(s)
- Chengcheng Zhang
- Department of Chemistry, University of Michigan, Ann Arbor, Michigan 48103, United States
| | - Solomon Adera
- Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan 48109, United States
| | | | - Zhan Chen
- Department of Chemistry, University of Michigan, Ann Arbor, Michigan 48103, United States
| |
Collapse
|
66
|
Remote, selective, and in situ manipulation of liquid droplets on a femtosecond laser-structured superhydrophobic shape-memory polymer by near-infrared light. Sci China Chem 2021. [DOI: 10.1007/s11426-020-9940-6] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/07/2023]
|
67
|
Chu T, Wang H, Qiu Y, Luo H, He B, Wu B, Gao B. 3D printed smart silk wearable sensors. Analyst 2021; 146:1552-1558. [PMID: 33475623 DOI: 10.1039/d0an02292f] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
Wearable sensors play a key role in point-of-care testing (POCT) for their flexible and integration capability for sensitive physiological and biochemical sensing. Here, we present a multifunction wearable silk patch with both electronic channels and microchannels by utilizing matrix-assisted sacrificial 3D printing methods. Owing to the unique properties of a composite silk film (polyvinyl alcohol (PVA) and silk fibroin (SF)), the wearable sensors possess excellent tensile properties, self-healing ability and biocompatibility. Multi-layer channel (microfluidics and microcircuit)-integrated silk wearable sensors were then fabricated for simultaneous sensitive sensing of human cancer markers (carcinoembryonic antigen (CEA) and alpha-fetoprotein (AFP)) and motion monitoring. These features of the silk wearable sensors indicate their potential value for sensitive sensing, which will enable them to find broader applications in many fields in POCT, artificial skin and organ-on-a-chip systems.
Collapse
Affiliation(s)
- Tianshu Chu
- School of Pharmaceutical Sciences, Nanjing Tech University, Nanjing 211816, China.
| | | | | | | | | | | | | |
Collapse
|
68
|
Chen G, Dai Z, Li S, Huang Y, Xu Y, She J, Zhou B. Magnetically Responsive Film Decorated with Microcilia for Robust and Controllable Manipulation of Droplets. ACS APPLIED MATERIALS & INTERFACES 2021; 13:1754-1765. [PMID: 33393309 DOI: 10.1021/acsami.0c16262] [Citation(s) in RCA: 25] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Droplet manipulations are critical for applications ranging from biochemical analysis, medical diagnosis to environmental controls. Even though magnetic actuation has exhibited great potential, the capability of high-speed, precise manipulation, and mixing improvement covering a broad droplet volume has not yet been realized. Herein, we demonstrated that the magnetic actuation could be conveniently achieved via decorating the magnetically responsive film with microcilia. Under magnetic field, the film can quickly response with localized deformation, along with the microcilia to realize the surface superhydrophobicity for droplet manipulation with velocity up to ∼173 mm/s covering a broad volume of 2-100 μL. The robust system further allows us to realize rapid and complete droplet mixing within ∼1.6 s. In addition, the microcilia decorated surface can preserve the robust superhydrophobicity after various stability tests, for example, normal pressing, chemical corrosion, and mechanical abrasion, exhibiting the possibility toward the long-term and real applications. With the multifunctional demonstrations such as obvious mixing improvement, parallel manipulation, and serial dilution, we believe that the methodology can open up a magnetic field-based avenue for future applications in digital microfluidics, and biochemical assays, etc.
Collapse
Affiliation(s)
- Ge Chen
- Joint Key Laboratory of the Ministry of Education, Institute of Applied Physics and Materials Engineering, University of Macau, Avenida da Universidade, Taipa, Macau 999078, China
| | - Ziyi Dai
- Joint Key Laboratory of the Ministry of Education, Institute of Applied Physics and Materials Engineering, University of Macau, Avenida da Universidade, Taipa, Macau 999078, China
| | - Shunbo Li
- Key Laboratory of Optoelectronic Technology and Systems, Ministry of Education & Key Disciplines Laboratory of Novel Micro-Nano Devices and System Technology, College of Optoelectronics Engineering, Chongqing University, Chongqing 400044, China
| | - Yifeng Huang
- State Key Laboratory of Optoelectronic Materials and Technologies, Guangdong Province Key Laboratory of Display Material and Technology, School of Electronics and Information Technology, Sun Yat-sen University, Guangzhou 510275, China
| | - Yi Xu
- Key Laboratory of Optoelectronic Technology and Systems, Ministry of Education & Key Disciplines Laboratory of Novel Micro-Nano Devices and System Technology, College of Optoelectronics Engineering, Chongqing University, Chongqing 400044, China
| | - Juncong She
- State Key Laboratory of Optoelectronic Materials and Technologies, Guangdong Province Key Laboratory of Display Material and Technology, School of Electronics and Information Technology, Sun Yat-sen University, Guangzhou 510275, China
| | - Bingpu Zhou
- Joint Key Laboratory of the Ministry of Education, Institute of Applied Physics and Materials Engineering, University of Macau, Avenida da Universidade, Taipa, Macau 999078, China
- Department of Physics and Chemistry, Faculty of Science and Technology, University of Macau, Avenida da Universidade, Taipa, Macau 999078, China
| |
Collapse
|
69
|
Yin Q, Guo Q, Wang Z, Chen Y, Duan H, Cheng P. 3D-Printed Bioinspired Cassie-Baxter Wettability for Controllable Microdroplet Manipulation. ACS APPLIED MATERIALS & INTERFACES 2021; 13:1979-1987. [PMID: 33351582 DOI: 10.1021/acsami.0c18952] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
It is a great challenge to fabricate a surface with Cassie-Baxter wettability that can be continuously adjusted from hydrophilicity to superhydrophobicity by changing of geometric parameters. In this paper, we propose and demonstrate a bioinspired surface fabricated by using a projection micro-stereolithography (PμSL) based 3D printing technique to address the challenge. Independent of materials, the bioinspired textured surface has a maximum contact angle (CA) of 171°, which is even higher than that of the omniphobic springtail skin we try to imitate. Most significantly, we are able to control the CA of the bioinspired surface in the range of 55-171° and the adhesion force from 71 to 99 μN continuously by only changing the geometric parameters of the bioinspired microstructures. The underlying mechanisms of the CA control of our bioinspired surface are also revealed by using a multi-phase lattice Boltzmann model. Furthermore, we demonstrate potential applications in droplet-based microreactors, nonloss water transportation, and coalescence of water droplets by employing our 3D-printed bioinspired structures with their remarkable precise Cassie-Baxter wettability control and petal effects. The present results potentially pave a new way for designing next generation functional surfaces for microdroplet manipulation, droplet-based biodetection, antifouling surfaces, and cell culture.
Collapse
Affiliation(s)
- Qiu Yin
- National Research Center for High-Efficiency Grinding, College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, PR China
| | - Qing Guo
- MOE Key Laboratory for Power Machinery and Engineering, School of Mechanical and Power Engineering, Shanghai Jiao Tong University, Shanghai 200240, PR China
| | - Zhaolong Wang
- National Research Center for High-Efficiency Grinding, College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, PR China
| | - Yiqin Chen
- National Research Center for High-Efficiency Grinding, College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, PR China
| | - Huigao Duan
- National Research Center for High-Efficiency Grinding, College of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, PR China
| | - Ping Cheng
- MOE Key Laboratory for Power Machinery and Engineering, School of Mechanical and Power Engineering, Shanghai Jiao Tong University, Shanghai 200240, PR China
| |
Collapse
|
70
|
Li D, Liang X, Li S, Wang T, Han G, Guo Z. Bioinspired textile with dual-stimuli responsive wettability for body moisture management and signal expression. NEW J CHEM 2021. [DOI: 10.1039/d1nj02471j] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
A smart bioinspired loofah textile with biosafe wettability shows high directional liquid transport capacity and the ability to identify liquids with different pH values.
Collapse
Affiliation(s)
- Deke Li
- School of materials engineering
- Lanzhou Institute of Technology
- Lanzhou 730050
- People's Republic of China
- State Key Laboratory of Solid Lubrication
| | - Xiaojing Liang
- State Key Laboratory of Solid Lubrication
- Lanzhou Institute of Chemical Physics
- Chinese Academy of Sciences
- Lanzhou 730000
- People's Republic of China
| | - Shanpeng Li
- College of Engineering
- Lishui University
- Lishui 323000
- People's Republic of China
| | - Tao Wang
- School of materials engineering
- Lanzhou Institute of Technology
- Lanzhou 730050
- People's Republic of China
| | - Guocai Han
- School of materials engineering
- Lanzhou Institute of Technology
- Lanzhou 730050
- People's Republic of China
| | - Zhiguang Guo
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials
- Hubei University
- Wuhan 430062
- People's Republic of China
- State Key Laboratory of Solid Lubrication
| |
Collapse
|
71
|
Chi J, Zhang X, Wang Y, Shao C, Shang L, Zhao Y. Bio-inspired wettability patterns for biomedical applications. MATERIALS HORIZONS 2021; 8:124-144. [PMID: 34821293 DOI: 10.1039/d0mh01293a] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Benefiting from the remarkable wettability heterogeneity, bio-inspired wettability patterns present a progressive and versatile platform for manipulating and patterning liquids, which provides an emerging strategy for operating liquid samples with crucial values in biomedical applications. In this review, we present a general summary of bio-inspired wettability patterns. After a compendious introduction of natural wettability phenomena and their underlying mechanisms, we summarize the general design principles and fabrication methods for preparing artificial wettability materials. Next, we shift to patterned surface wettability with an emphasis on the fabrication approaches. Then, we discuss in detail the various practical applications of wettability patterns in the biomedical field, including cell culture, drug screening and biosensors. Critical thinking about the current challenges and future outlook is also provided. We believe that this review would propel the prosperous development of bio-inspired wettability patterns to flourish in the field of biomedical engineering.
Collapse
Affiliation(s)
- Junjie Chi
- Department of Rheumatology and Immunology, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing 210008, China.
| | | | | | | | | | | |
Collapse
|
72
|
Majhy B, Jain SK, Sen AK. Attraction and Repulsion between Liquid Droplets over a Liquid-Impregnated Surface. J Phys Chem Lett 2020; 11:10001-10006. [PMID: 33179937 DOI: 10.1021/acs.jpclett.0c02997] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
We show that adjacent liquid droplets exhibit long-range attraction and repulsion on an immiscible liquid impregnating a surface when either the drop or the impregnating liquid is volatile. Remarkably, we find that at small times the interaction is attractive, analogous to the "Cheerios effect", but at large times the interaction becomes repulsive depicting the "reverse-Cheerios effect". Our study reveals that the interaction is underpinned by wetting and capillarity, buoyancy, and evaporation phenomena. We experimentally observe the interaction between a pair of droplets and provide a theoretical framework to quantitatively predict their transport behavior.
Collapse
Affiliation(s)
- B Majhy
- Micro Nano Bio-Fluidics Unit, Fluid Systems Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600036, Tamilnadu, India
| | - S K Jain
- Micro Nano Bio-Fluidics Unit, Fluid Systems Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600036, Tamilnadu, India
| | - A K Sen
- Micro Nano Bio-Fluidics Unit, Fluid Systems Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600036, Tamilnadu, India
| |
Collapse
|
73
|
Chen H, Bian F, Sun L, Zhang D, Shang L, Zhao Y. Hierarchically Molecular Imprinted Porous Particles for Biomimetic Kidney Cleaning. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e2005394. [PMID: 33184956 DOI: 10.1002/adma.202005394] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/09/2020] [Revised: 10/29/2020] [Indexed: 06/11/2023]
Abstract
Blood purification by adsorption of excessive biomolecules is vital for maintaining human health. Here, inspired by kidney self-purification, which removes a number of biomolecules with different sizes simultaneously, hierarchical molecular-imprinted inverse opal particles integrated with a herringbone microfluidic chip for efficient biomolecules cleaning are presented. The particle possesses combinative porous structure with both surface and interior imprints for the specific recognition of small molecules and biomacromolecules. Additionally, the presence of the herringbone mixer largely improve the adsorption efficiency due to enhanced mixing. Moreover, the inverse opal framework of the particles give rise to optical sensing ability for self-reporting of the adsorption states. These features, together with its reusability, biosafety, and biocompatibility, make the platform highly promising for clinical blood purification and artificial kidney construction.
Collapse
Affiliation(s)
- Hanxu Chen
- Department of Rheumatology and Immunology, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing, 210008, China
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| | - Feika Bian
- Department of Rheumatology and Immunology, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing, 210008, China
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| | - Lingyu Sun
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| | - Dagan Zhang
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| | - Luoran Shang
- Zhongshan-Xuhui Hospital, the Shanghai Key Laboratory of Medical Epigenetics, Institutes of Biomedical Sciences, Fudan University, Shanghai, 200032, China
| | - Yuanjin Zhao
- Department of Rheumatology and Immunology, Institute of Translational Medicine, The Affiliated Drum Tower Hospital of Nanjing University Medical School, Nanjing, 210008, China
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing, 210096, China
| |
Collapse
|
74
|
Suo S, Gan Y. Rupture of Liquid Bridges on Porous Tips: Competing Mechanisms of Spontaneous Imbibition and Stretching. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2020; 36:13642-13648. [PMID: 33147041 DOI: 10.1021/acs.langmuir.0c02479] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Liquid bridges are commonly encountered in nature and the liquid transfer induced by their rupture is widely used in various industrial applications. In this work, with the focus on the porous tip, we studied the impacts of capillary effects on the liquid transfer induced by the rupture through numerical simulations. To depict the capillary effects of a porous tip, a time scale ratio, RT, is proposed to compare the competing mechanisms of spontaneous imbibition and external drag. In terms of RT, we then develop a theoretical model for estimating the liquid retention ratio considering the geometry, porosity, and wettability of tips. The mechanism presented in this work provides a possible approach to control the liquid transfer with better accuracy in microfluidics or microfabrications.
Collapse
Affiliation(s)
- Si Suo
- School of Civil Engineering, The University of Sydney, Sydney, NSW 2006, Australia
| | - Yixiang Gan
- School of Civil Engineering, The University of Sydney, Sydney, NSW 2006, Australia
| |
Collapse
|
75
|
He Y, Mao T, Gu Y, Yang Y, Ding J. A simplified yet enhanced and versatile microfluidic platform for cyclic cell stretching on an elastic polymer. Biofabrication 2020; 12:045032. [DOI: 10.1088/1758-5090/abb295] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
|
76
|
Zhao C, Zhu Y, Kong B, Huang Y, Yan D, Tan H, Shang L. Dual-Core Prebiotic Microcapsule Encapsulating Probiotics for Metabolic Syndrome. ACS APPLIED MATERIALS & INTERFACES 2020; 12:42586-42594. [PMID: 32869634 DOI: 10.1021/acsami.0c13518] [Citation(s) in RCA: 28] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Designing strategies to utilize the synergistic effect of probiotics and prebiotics is a promising way in treating metabolic-related diseases. Here, inspired by the mutually promotable but mutually incompatible characteristics of Yin and Yang, dual-core microcapsules that encapsulate Lactobacillus and Bacillus subtilis into separate compartments were presented through electrostatically driven microfluidics. The microcapsules showed acid resistance and preserved probiotic activity. They also fostered the proliferation of probiotics while creating an anaerobic environment and promoted lactic acid fermentation without affecting each other. It has been demonstrated that the microcapsules could reduce inflammation, improve fat metabolism, and restore intestinal barrier functions, thus contributing to the treatment of metabolic syndrome in vivo. These features make the dual-core microcapsules an ideal candidate for treating metabolic syndrome and related diseases.
Collapse
Affiliation(s)
- Cheng Zhao
- Department of Endocrinology, Health Science Center, The First Affiliated Hospital, Shenzhen University, Shenzhen 518035, China
- Department of Neurosurgery, The First Affiliated Hospital of Shenzhen University, Health Science Center of Shenzhen University, Shenzhen 518035, China
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China
| | - Yujuan Zhu
- Department of Endocrinology, Health Science Center, The First Affiliated Hospital, Shenzhen University, Shenzhen 518035, China
- Department of Neurosurgery, The First Affiliated Hospital of Shenzhen University, Health Science Center of Shenzhen University, Shenzhen 518035, China
| | - Bin Kong
- Department of Endocrinology, Health Science Center, The First Affiliated Hospital, Shenzhen University, Shenzhen 518035, China
- Department of Neurosurgery, The First Affiliated Hospital of Shenzhen University, Health Science Center of Shenzhen University, Shenzhen 518035, China
| | - Yutong Huang
- Macau University of Science and Technology, Macau 999078, China
| | - Dewen Yan
- Department of Endocrinology, Health Science Center, The First Affiliated Hospital, Shenzhen University, Shenzhen 518035, China
| | - Hui Tan
- Department of Neurosurgery, The First Affiliated Hospital of Shenzhen University, Health Science Center of Shenzhen University, Shenzhen 518035, China
| | - Luoran Shang
- Zhongshan-Xuhui Hospital, the Shanghai Key Laboratory of Medical Epigenetics, the International Co-laboratory of Medical Epigenetics and Metabolism, Ministry of Science and Technology, and Institutes of Biomedical Sciences, Fudan University, Shanghai 200032, China
| |
Collapse
|
77
|
Liu C, Zhang L, Zhang X, Jia Y, Di Y, Gan Z. Bioinspired Free-Standing One-Dimensional Photonic Crystals with Janus Wettability for Water Quality Monitoring. ACS APPLIED MATERIALS & INTERFACES 2020; 12:40979-40984. [PMID: 32794686 DOI: 10.1021/acsami.0c13618] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Materials with specific wettability properties have aroused enormous interest and research for their broad application prospects in chemical reaction, medical diagnosis, biological analysis, etc. Here, inspired by the unique Janus wettability of lotus leaf and Bragg stacks of beetles, we present a free-standing film with Janus wettability and tunable structural color for water quality monitoring. This film is constructed by using a flexible polymer polyurethane (PU) to pack poly(N-isopropyl acrylamide-bis-acrylamide-acrylic acid) (P(NiPAAm-bis-AA))/TiO2 one-dimensional photonic crystals (1DPCs) into a free-standing state with Janus wettability and tunable structural color. The outer top surface of the film could achieve vivid structural color and a superhydrophobic ability; meanwhile, the outer lower surface could achieve a superhydrophilic ability. Owing to the outstanding pH-sensitive property of the P(NiPAAm-bis-AA), the Janus films could switch its structural color under different pH conditions. This imparts the free-standing film with stability and an antirotation property on the air-water interface. Based on this phenomenon, we have demonstrated a Janus wettability film, together with tunable structural color for water quality monitoring, which gives the bioinspired materials high potential applications in environmental protection.
Collapse
Affiliation(s)
- Cihui Liu
- School of Physics and Technology, Nanjing Normal University, Nanjing 210000, People's Republic of China
| | - Lulu Zhang
- School of Physics and Technology, Nanjing Normal University, Nanjing 210000, People's Republic of China
| | - Xinran Zhang
- School of Physics and Technology, Nanjing Normal University, Nanjing 210000, People's Republic of China
| | - Yizhen Jia
- School of Physics and Technology, Nanjing Normal University, Nanjing 210000, People's Republic of China
| | - Yunsong Di
- School of Physics and Technology, Nanjing Normal University, Nanjing 210000, People's Republic of China
| | - Zhixing Gan
- School of Physics and Technology, Nanjing Normal University, Nanjing 210000, People's Republic of China
| |
Collapse
|
78
|
Chu T, Chu J, Gao B, He B. Modern evolution of paper-based analytical devices for wearable use: from disorder to order. Analyst 2020; 145:5388-5399. [PMID: 32700700 DOI: 10.1039/d0an00994f] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Abstract
Paper devices have attracted great attention for their rapid development in multiple fields, such as life sciences, biochemistry, and materials science. When manufacturing paper chips, flexible materials, such as cellulose paper or other porous flexible membranes, can offer several advantages in terms of their flexibility, lightweight, low cost, safety and wearability. However, traditional cellulose paper sheets with chaotic cellulose fiber constitutions do not have special structures and optical characteristics, leading to poor repeatability and low sensitivity during biochemical sensing, limiting their wide application. Recent evidence showed that the addition of ordered structure provides a promising method for manufacturing intelligent flexible devices, making traditional flexible devices with multiple functions (microfluidics, motion detection and optical display). There is an urgent need for an overall summary of the evolution of paper devices so that readers can fully understand the field. Hence, in this review, we summarized the latest developments in intelligent paper devices, starting with the fabrication of paper and smart flexible paper devices, in the fields of biology, chemistry, electronics, etc. First, we outlined the manufacturing methods and applications of both traditional cellulose paper devices and modern smart devices based on pseudopaper (order paper). Then, considering different materials, such as cellulose, nitrocellulose, nature sourced photonic crystals (photonic crystals sourced from nature directly) and artificial photonic crystals, we summarized a new type of smart flexible device containing an ordered structure. Next, the applications of paper devices in biochemical sensing, wearable sensing, and cross-scale sensing were discussed. Finally, we summarized the development direction of this field. The aim of this review is to take an integral cognition approach to the development of smart flexible paper devices in multiple fields and promote communications between materials science, biology, chemistry and electrical science.
Collapse
Affiliation(s)
- Tianshu Chu
- School of Pharmaceutical Sciences, Nanjing Tech University, Nanjing 211816, China.
| | | | | | | |
Collapse
|