Biomimicking Extracellular Matrix: Cell Adhesive RGD Peptide Modified Electrospun Poly(D,L-lactic-co-glycolic acid) Nanofiber Mesh

Poly(Lactic-co-Glycolic Acid): Applications and Future Prospects for Periodontal Tissue Regeneration

Periodontal tissue regeneration is the ultimate goal of the treatment for periodontitis-affected teeth. The success of regenerative modalities relies heavily on the utilization of appropriate biomaterials with specific properties. Poly (lactic-co-glycolic acid) (PLGA), a synthetic aliphatic polyester, has been actively investigated for periodontal therapy due to its favorable mechanical properties, tunable degradation rates, and high biocompatibility. Despite the attractive characteristics, certain constraints associated with PLGA, in terms of its hydrophobicity and limited bioactivity, have led to the introduction of modification strategies that aimed to improve the biological performance of the polymer. Here, we summarize the features of the polymer and update views on progress of its applications as barrier membranes, bone grafts, and drug delivery carriers, which indicate that PLGA can be a good candidate material in the field of periodontal regenerative medicine.

Self-assembling peptide nanostructures on aligned poly(lactide-co-glycolide) nanofibers for the functional regeneration of sciatic nerve

Aim: Regeneration of functional peripheral nerve tissue at critical-sized defect requires extracellular matrix analogs impregnated with appropriate biosignals to regulate the cell fate process and subsequent tissue progression. The aim of the study was to develop electrospun aligned nanofibers as architectural analogs integrated with RADA16-I-BMHP1 as biofunctional peptides. Materials & methods: Aligned poly(lactide-co-glycolide) (PLGA)-RADA16-I-BMHP1 nanofibers were fabricated and characterized for their in vitro potential using rat Schwann cell line and in vivo potential using a 10 mm sciatic nerve transection rat model. Results: PLGA-peptide scaffolds significantly promoted higher expression of genotypic markers and bipolar extension of Schwann cells. Further, PLGA-peptide treated animals promoted the native collagen organization, remyelination and showed significantly higher recovery of sensorimotor and motor function than PLGA-treated groups (p < 0.05). Conclusion: Our results demonstrate that self-assembling peptide nanostructures on aligned PLGA nanofibers provided better cell–matrix communication with significant functional restoration of the sciatic nerve.

A multi-walled silk fibroin/silk sericin nerve conduit coated with poly(lactic-co-glycolic acid) sheath for peripheral nerve regeneration

The linearly oriented multi-walled silk fibroin/silk sericin (SF/SS) nerve conduits (NCs) can provide physical cues similar to native peripheral nerve fasciculi, but the mechanical properties of which are not excellent enough. In this study, NCs with a novel and bionic design with dual structures were developed. The important features of our NCs is that the internal skeleton (the multi-walled SF/SS conduits) has a bionic structure similar to the architecture of native peripheral nerve fasciculi, which is beneficial for nerve regeneration, and the outer sheath (the hollow poly(lactic-co-glycolic acid) [PLGA] conduits) could provide strong mechanical protection for the internal skeleton. The linearly oriented multi-walled SF/SS conduit was fabricated and inserted in the hollow PLGA sheath lumen and then used for the bridge across the sciatic nerve defect in rats. The outcome of the peripheral nerve repair post implantation was evaluated. The functional and morphological parameters were examined and showed that the novel PLGA-coated SF/SS NCs could promote peripheral nerve regeneration, approaching those elicited by nerve autografts that are the first candidate for repair of peripheral nerve defects. Thus, these updated NCs have potential usefulness to enhance functional recovery after repair of peripheral nerve defect.

Micro- and Macrostructured PLGA/Gelatin Scaffolds Promote Early Cardiogenic Commitment of Human Mesenchymal Stem Cells In Vitro

The biomaterial scaffold plays a key role in most tissue engineering strategies. Its surface properties, micropatterning, degradation, and mechanical features affect not only the generation of the tissue construct in vitro, but also its in vivo functionality. The area of myocardial tissue engineering still faces significant difficulties and challenges in the design of bioactive scaffolds, which allow composition variation to accommodate divergence in the evolving myocardial structure. Here we aimed at verifying if a microstructured bioartificial scaffold alone can provoke an effect on stem cell behavior. To this purpose, we fabricated microstructured bioartificial polymeric constructs made of PLGA/gelatin mimicking anisotropic structure and mechanical properties of the myocardium. We found that PLGA/gelatin scaffolds promoted adhesion, elongation, ordered disposition, and early myocardial commitment of human mesenchymal stem cells suggesting that these constructs are able to crosstalk with stem cells in a precise and controlled manner. At the same time, the biomaterial degradation kinetics renders the PLGA/gelatin constructs very attractive for myocardial regeneration approaches.

The influence of tissue microenvironment on stem cell-based cartilage repair

Mesenchymal stem/progenitor cells and induced pluripotent stem cells have become viable cell sources for prospective cell-based cartilage engineering and tissue repair. The development and function of stem cells are influenced by the tissue microenvironment. Specifically, the local tissue microenvironment can dictate how stem cells integrate into the existing tissue matrix and how successfully they can restore function to the damaged area in question. This review focuses on the microenvironmental features of articular cartilage and how they influence stem cell-based cartilage tissue repair. Also discussed are current tissue-engineering strategies used in combination with cell-based therapies, all of which are designed to mimic the natural properties of cartilage tissue in order to achieve a better healing response.

Electrospun Nanofibers Surface-modified with Fluorescent Proteins

Electrospun nanofiber surfaces are modified with proteins to control protein release. A mixture of poly(ε-caprolactone) (PCL) and PCL—PEG block copolymers is electrospun to prepare amine-terminated block copolymers. The amount of surface exposed amine groups increases as the blend ratio of block copolymer increases. Cell attachments on the nanofibers change according to the ratio of the block copolymer in the blend; this indicates that the PEG moiety plays a significant role in enhancing and decreasing biocompatibility of nanofibers. Fluorescent proteins are immobilized on the surface of nanofibers by conjugating activated carboxylic groups of the protein to the surface exposed amine groups of nanofibers in an aqueous environment. The number of amine groups increases as the ratio of block copolymers increases. Proteins that are chemically associated with the nanofibers show an attenuated release profile while most of the proteins physically associated with the nanofibers are released in 1 day. These results show that the protein-immobilized nanofibers can be potentially applied to tissue engineering scaffolds and wound healing materials with bioactive protein being slowly released over a long period of time.

Biologically and mechanically driven design of an RGD-mimetic macroporous foam for adipose tissue engineering applications

Despite clinical treatments for adipose tissue defects, in particular breast tissue reconstruction, have certain grades of efficacy, many drawbacks are still affecting the long-term survival of new formed fat tissue. To overcome this problem, in the last decades, several scaffolding materials have been investigated in the field of adipose tissue engineering. However, a strategy able to recapitulate a suitable environment for adipose tissue reconstruction and maintenance is still missing. To address this need, we adopted a biologically and mechanically driven design to fabricate an RGD-mimetic poly(amidoamine) oligomer macroporous foam (OPAAF) for adipose tissue reconstruction. The scaffold was designed to fulfil three fundamental criteria: capability to induce cell adhesion and proliferation, support of in vivo vascularization and match of native tissue mechanical properties. Poly(amidoamine) oligomers were formed into soft scaffolds with hierarchical porosity through a combined free radical polymerization and foaming reaction. OPAAF is characterized by a high water uptake capacity, progressive degradation kinetics and ideal mechanical properties for adipose tissue reconstruction. OPAAF's ability to support cell adhesion, proliferation and adipogenesis was assessed in vitro using epithelial, fibroblast and endothelial cells (MDCK, 3T3L1 and HUVEC respectively). In addition, in vivo subcutaneous implantation in murine model highlighted OPAAF potential to support both adipogenesis and vessels infiltration. Overall, the reported results support the use of OPAAF as a scaffold for engineered adipose tissue construct.

The synergistic effect of nano-hydroxyapatite and dexamethasone in the fibrous delivery system of gelatin and poly(l-lactide) on the osteogenesis of mesenchymal stem cells

Recently, electrospun nanofibrous scaffolds are vastly taken into consideration in the bone tissue engineering due to mimicking the natural structure of native tissue. In our study, surface features of nanofibers were modified through simultaneous electrospining of the synthetic and natural polymers using poly l-lactide (PLLA) and gelatin to fabricate the hybrid scaffold (PLLA/gelatin). Then, hydroxyapatite nanoparticles (nHA) were loaded in electrospun PLLA nanofibers (PLLA,nHA/gelatin) and also dexamethasone (DEX) was incorporated in these fibers (PLLA,nHA,DEX/gelatin) in the second experiment. Fabricated nanofibrous composite scaffolds were characterized via SEM, FTIR spectroscopy, contact angle, tensile strength measurements, DEX release profile and MTT assay. After seeding adipose derived mesenchymal stem cells, osteoinductivity and osteoconductivity of fabricated scaffolds were analyzed using common osteogenic markers such as alkaline phosphatase activity, calcium depositions and gene expression. These results confirmed that all properties of nanofibers were improved by modifications. Moreover, osteogenic differentiation of stem cells increased in PLLA,nHA/gelatin group in comparison with PLLA/gelatin. The sustained release of DEX was obtained from PLLA,nHA,DEX/gelatin which subsequently led to more osteogenic differentiation. Taken together, PLLA,nHA,DEX/gelatin showed significant potential to support the stem cell proliferation and ostogenic differentiation, and can be a good candidates for tissue engineering and regenerative medicine applications.

Ozone Gas as a Benign Sterilization Treatment for PLGA Nanofiber Scaffolds

The use of electrospun nanofibers for tissue engineering and regenerative medicine applications is a growing trend as they provide improved support for cell proliferation and survival due, in part, to their morphology mimicking that of the extracellular matrix. Sterilization is a critical step in the fabrication process of implantable biomaterial scaffolds for clinical use, but many of the existing methods used to date can negatively affect scaffold properties and performance. Poly(lactic-co-glycolic acid) (PLGA) has been widely used as a biodegradable polymer for 3D scaffolds and can be significantly affected by current sterilization techniques. The aim of this study was to investigate pulsed ozone gas as an alternative method for sterilizing PLGA nanofibers. The morphology, mechanical properties, physicochemical properties, and response of cells to PLGA nanofiber scaffolds were assessed following different degrees of ozone gas sterilization. This treatment killed Geobacillus stearothermophilus spores, the most common biological indicator used for validation of sterilization processes. In addition, the method preserved all of the characteristics of nonsterilized PLGA nanofibers at all degrees of sterilization tested. These findings suggest that ozone gas can be applied as an alternative method for sterilizing electrospun PLGA nanofiber scaffolds without detrimental effects.

Electrospun Fibers for Spinal Cord Injury Research and Regeneration

Electrospinning is the process by which a scaffold containing micrometer and nanometer diameter fibers are drawn from a polymer solution or melt using a large voltage gradient between a polymer emitting source and a grounded collector. Ramakrishna and colleagues first investigated electrospun fibers for neural applications in 2004. After this initial study, electrospun fibers are increasingly investigated for neural tissue engineering applications. Electrospun fibers robustly support axonal regeneration within in vivo rodent models of spinal cord injury. These findings suggest the possibility of their eventual use within patients. Indeed, both spinal cord and peripheral nervous system regeneration research over the last several years shows that physical guidance cues induce recovery of limb, respiration, or bladder control in rodent models. Electrospun fibers may be an alternative to the peripheral nerve graft (PNG), because PNG autografts injure the patient and are limited in supply, and allografts risk host rejection. In addition, electrospun fibers can be engineered easily to confront new therapeutic challenges. Fibers can be modified to release therapies locally or can be physically modified to direct neural stem cell differentiation. This review summarizes the major findings and trends in the last decade of research, with a particular focus on spinal cord injury. This review also demonstrates how electrospun fibers can be used to study the central nervous system in vitro.

Nanogel-electrospinning for controlling the release of water-soluble drugs

Application of electrospun fibers for the purpose of loading and controlled release of water-soluble drugs remains a challenge due to their low carrying effect as well as quick and unstable drug release. In this study, we have developed a novel nanogel-electrospinning technology through which more stable loading and prolonged release of water-soluble drugs was achieved. In brief, nanogel particles synthesized from a chloroquine (CQ)-loaded bovine serum albumin (BSA) solution were prepared and then combined with genipin, a crosslinking agent. The nanogel solution was then crosslinked to prepare an electrospinning solution with an inner mesh structure. Finally, the microfibrous membranes were fabricated by electrospinning the solution. Uniform BSA nanogel particles were wrapped in the fiber membrane and the number of particles increased with the increase of BSA and genipin concentrations. In addition to being loaded within the BSA nanogel particles, CQ was distributed in the fibers as well, which could be clearly identified using ultraviolet-visible spectroscopy (UV-Vis). The physical, chemical, and mechanical properties of nanogel-electrospun microfibers were similar to those of microfibers formed through a conventional electrospinning approach. The drug release tests indicated that with the same number of BSA nanogel particles, increased CQ loading resulted in increased initial release of the same. The duration of a single drug release cycle lasted up to 40 days. In conclusion, findings from this study have indicated that nanogel-electrospinning is a convenient and effective technology to achieve controlled long-term release of water-soluble drugs.

Spheroid culture of primary hepatocytes with short fibers as a predictable in vitro model for drug screening

Short fibers are utilized as scaffolds for generation of size-controlled hepatocyte spheroids, exhibiting an efficient in vitro model for determining drug metabolism.

Nanomaterials for Functional Textiles and Fibers

Nanoparticles are very interesting because of their surface properties, different from bulk materials. Such properties make possible to endow ordinary products with new functionalities. Their relatively low cost with respect to other nano-additives make them a promising choice for industrial mass-production systems. Nanoparticles of different kind of materials such as silver, titania, and zinc oxide have been used in the functionalization of fibers and fabrics achieving significantly improved products with new macroscopic properties. This article reviews the most relevant approaches for incorporating such nanoparticles into synthetic fibers used traditionally in the textile industry allowing to give a solution to traditional problems for textiles such as the microorganism growth onto fibers, flammability, robustness against ultraviolet radiation, and many others. In addition, the incorporation of such nanoparticles into special ultrathin fibers is also analyzed. In this field, electrospinning is a very promising technique that allows the fabrication of ultrathin fiber mats with an extraordinary control of their structure and properties, being an ideal alternative for applications such as wound healing or even functional membranes.

An In Vitro Comparison of the Incorporation, Growth, and Chondrogenic Potential of Human Bone Marrow versus Adipose Tissue Mesenchymal Stem Cells in Clinically Relevant Cell Scaffolds Used for Cartilage Repair

AIM

To compare the incorporation, growth, and chondrogenic potential of bone marrow (BM) and adipose tissue (AT) mesenchymal stem cells (MSCs) in scaffolds used for cartilage repair.

METHODS

Human BM and AT MSCs were isolated, culture expanded, and characterised using standard protocols, then seeded into 2 different scaffolds, Chondro-Gide or Alpha Chondro Shield. Cell adhesion, incorporation, and viable cell growth were assessed microscopically and following calcein AM/ethidium homodimer (Live/Dead) staining. Cell-seeded scaffolds were treated with chondrogenic inducers for 28 days. Extracellular matrix deposition and soluble glycosaminoglycan (GAG) release into the culture medium was measured at day 28 by histology/immunohistochemistry and dimethylmethylene blue assay, respectively.

RESULTS

A greater number of viable MSCs from either source adhered and incorporated into Chondro-Gide than into Alpha Chondro Shield. In both cell scaffolds, this incorporation represented less than 2% of the cells that were seeded. There was a marked proliferation of BM MSCs, but not AT MSCs, in Chondro-Gide. MSCs from both sources underwent chondrogenic differentiation following induction. However, cartilaginous extracellular matrix deposition was most marked in Chondro-Gide seeded with BM MSCs. Soluble GAG secretion increased in chondrogenic versus control conditions. There was no marked difference in GAG secretion by MSCs from either cell source.

CONCLUSION

Chondro-Gide and Alpha Chondro Shield were permissive to the incorporation and chondrogenic differentiation of human BM and AT MSCs. Chondro-Gide seeded with BM MSCs demonstrated the greatest increase in MSC number and deposition of a cartilaginous tissue.

Fabricating Superhydrophobic Polymeric Materials for Biomedical Applications

Superhydrophobic materials, with surfaces possessing permanent or metastable non-wetted states, are of interest for a number of biomedical and industrial applications. Here we describe how electrospinning or electrospraying a polymer mixture containing a biodegradable, biocompatible aliphatic polyester (e.g., polycaprolactone and poly(lactide-co-glycolide)), as the major component, doped with a hydrophobic copolymer composed of the polyester and a stearate-modified poly(glycerol carbonate) affords a superhydrophobic biomaterial. The fabrication techniques of electrospinning or electrospraying provide the enhanced surface roughness and porosity on and within the fibers or the particles, respectively. The use of a low surface energy copolymer dopant that blends with the polyester and can be stably electrospun or electrosprayed affords these superhydrophobic materials. Important parameters such as fiber size, copolymer dopant composition and/or concentration, and their effects on wettability are discussed. This combination of polymer chemistry and process engineering affords a versatile approach to develop application-specific materials using scalable techniques, which are likely generalizable to a wider class of polymers for a variety of applications.

Post-Electrospinning "Triclick" Functionalization of Degradable Polymer Nanofibers

4-Dibenzocyclooctynol (DIBO) was used as an initiator for the ring-opening copolymerization of ε-caprolactone and 1,4,8-trioxaspiro[4.6]-9-undecanone (TOSUO) resulting in a series of DIBO end-functionalized copolymers. Following deprotection of the ketone group, the polymers were derivatized with aminooxyl-containing compounds by oxime ligation. Mixtures of keto- and alkyne-derivatized polymers were co-electrospun into well-defined nanofibers containing three separate chemical handles. Strain-promoted azide alkyne cycloaddition (SPAAC), oxime ligation, and copper-catalyzed azide alkyne cycloaddition (CuAAC) were used to sequentially functionalize the nanofibers first with fluorescent reporters and then separately with bioactive Gly-Arg-Gly-Asp-Ser (GRGDS), BMP-2 peptide, and dopamine. This translationally relevant approach facilitates the straightforward derivatization of diverse bioactive molecules that can be controllably tethered to the surface of nanofibers.

Enhanced Schwann cell attachment and alignment using one-pot "dual click" GRGDS and YIGSR derivatized nanofibers

Using metal-free click chemistry and oxime condensation methodologies, GRGDS and YIGSR peptides were coupled to random and aligned degradable nanofiber networks postelectrospinning in a one-pot reaction. The bound peptides are bioactive, as demonstrated by Schwann cell attachment and proliferation, and the inclusion of YIGSR with GRGDS alters the expression of the receptor for YIGSR. Additionally, aligned nanofibers act as a potential guidance cue by increasing the aspect ratio and aligning the actin filaments, which suggest that peptide-functionalized scaffolds would be useful to direct SCs for peripheral nerve regeneration.

Decoration of PLGA electrospun nanofibers with designer self-assembling peptides: a “Nano-on-Nano” concept

A composite neural scaffold which combines the topographical features of electrospun nanofibrous scaffolds and bioactive as well as nanostructured features of designer self-assembling peptides (“Nano on Nano” approach).

Engineered ECM-like microenvironment with fibrous particles for guiding 3D-encapsulated hMSC behaviours

The incorporation of RGD-coupled fibrous particles into the alginate hydrogel promotes 3D-encapsulated cell behaviours by allowing mutual binding with the particles.

Engineering of biomimetic nanofibrous matrices for drug delivery and tissue engineering

Biomimetic nanofibers have emerged as promising candidates for drug delivery and tissue engineering applications. In this paper, recent advances on the fabrication and application of biomimetic nanofibers as drug carriers and scaffolding materials are reviewed. First, we delineate the three popular nanofiber fabrication techniques including electrospinning, phase separation and molecular self-assembly, covering the principal materials used for different techniques and surface functionalization strategies for nanofibers. Furthermore, we focus our interest on the nanofiber-based delivery strategies and underlying kinetics for growth factors and other bioactive molecules, following which we summarize the recent advances in the development of these nanofibrous matrices for bone, vascular and neural tissue engineering applications. Finally, research challenges and future trends in the related areas are discussed.

Electrospun PLGA fibers incorporated with functionalized biomolecules for cardiac tissue engineering

Structural similarity of electrospun fibers (ESFs) to the native extracellular matrix provides great potential for the application of biofunctional ESFs in tissue engineering. This study aimed to synthesize biofunctionalized poly (L-lactide-co-glycolide) (PLGA) ESFs for investigating the potential for cardiac tissue engineering application. We developed a simple but novel strategy to incorporate adhesive peptides in PLGA ESFs. Two adhesive peptides derived from laminin, YIGSR, and RGD, were covalently conjugated to poly-L-lysine, and then mingled with PLGA solution for electrospinning. Peptides were uniformly distributed on the surface and in the interior of ESFs. PLGA ESFs incorporated with YIGSR or RGD or adsorbed with laminin significantly enhanced the adhesion of cardiomyocytes isolated from neonatal rats. Furthermore, the cells were found to adhere better on ESFs compared with flat substrates after 7 days of culture. Immunofluorescent staining of F-actin, vinculin, a-actinin, and N-cadherin indicated that cardiomyocytes adhered and formed striated α-actinin better on the laminin-coated ESFs and the YIGSR-incorporated ESFs compared with the RGD-incorporated ESFs. The expression of α-myosin heavy chain and β-tubulin on the YIGSR-incorporated ESFs was significantly higher compared with the expression level on PLGA and RGD-incorporated samples. Furthermore, the contraction of cardiomyocytes was faster and lasted longer on the laminin-coated ESFs and YIGSR-incorporated ESFs. The results suggest that aligned YIGSR-incorporated PLGA ESFs is a better candidate for the formation of cardiac patches. This study demonstrated the potential of using peptide-incorporated ESFs as designable-scaffold platform for tissue engineering.

A comprehensive review of advanced biopolymeric wound healing systems

Wound healing is a complex and dynamic process that involves the mediation of many initiators effective during the healing process such as cytokines, macrophages and fibroblasts. In addition, the defence mechanism of the body undergoes a step-by-step but continuous process known as the wound healing cascade to ensure optimal healing. Thus, when designing a wound healing system or dressing, it is pivotal that key factors such as optimal gaseous exchange, a moist wound environment, prevention of microbial activity and absorption of exudates are considered. A variety of wound dressings are available, however, not all meet the specific requirements of an ideal wound healing system to consider every aspect within the wound healing cascade. Recent research has focussed on the development of smart polymeric materials. Combining biopolymers that are crucial for wound healing may provide opportunities to synthesise matrices that are inductive to cells and that stimulate and trigger target cell responses crucial to the wound healing process. This review therefore outlines the processes involved in skin regeneration, optimal management and care required for wound treatment. It also assimilates, explores and discusses wound healing drug-delivery systems and nanotechnologies utilised for enhanced wound healing applications.

Mussel-inspired cell-adhesion peptide modification for enhanced endothelialization of decellularized blood vessels

Enhanced endothelialization of tissue-engineered blood vessels is essential for vascular regeneration and function of engineered vessels. In this study, mussel-inspired surface chemistry of polydopamine (pDA) coatings are applied to functionalize decellularized vein matrix (DVM) with extracellular matrix-derived cell adhesion peptides (RGD and YIGSR). DVMs engineered with pDA-peptides enhance focal adhesion, metabolic activity, and endothelial differentiation of human endothelial progenitor cells (EPCs) derived from cord blood and embryonic stem cells compared with EPCs on non-coated or pDA-coated DVMs. These results indicate that pDA-peptide functionalization may contribute to enhanced, rapid endothelialization of DVM surfaces by promoting adhesion, proliferation, and differentiation of circulating EPCs. Ultimately, this approach may be useful for improving in vivo patency and function of decellularized matrix-based blood vessels.

Nanotechnology biomimetic cartilage regenerative scaffolds

Cartilage has a limited regenerative capacity. Faced with the clinical challenge of reconstruction of cartilage defects, the field of cartilage engineering has evolved. This article reviews current concepts and strategies in cartilage engineering with an emphasis on the application of nanotechnology in the production of biomimetic cartilage regenerative scaffolds. The structural architecture and composition of the cartilage extracellular matrix and the evolution of tissue engineering concepts and scaffold technology over the last two decades are outlined. Current advances in biomimetic techniques to produce nanoscaled fibrous scaffolds, together with innovative methods to improve scaffold biofunctionality with bioactive cues are highlighted. To date, the majority of research into cartilage regeneration has been focused on articular cartilage due to the high prevalence of large joint osteoarthritis in an increasingly aging population. Nevertheless, the principles and advances are applicable to cartilage engineering for plastic and reconstructive surgery.

Learning from nature - novel synthetic biology approaches for biomaterial design

Many biomaterials constructed today are complex chemical structures that incorporate biologically active components derived from nature, but the field can still be said to be in its infancy. The need for materials that bring sophisticated properties of structure, dynamics and function to medical and non-medical applications will only grow. Increasing appreciation of the functionality of biological systems has caused biomaterials researchers to consider nature for design inspiration, and many examples exist of the use of biomolecular motifs. Yet evolution, nature's only engine for the creation of new designs, has been largely ignored by the biomaterials community. Molecular evolution is an emerging tool that enables one to apply nature's engineering principles to non-natural situations using variation and selection. The purpose of this review is to highlight the most recent advances in the use of molecular evolution in synthetic biology applications for biomaterial engineering, and to discuss some of the areas in which this approach may be successfully applied in the future.

In vitro models of tumor vessels and matrix: engineering approaches to investigate transport limitations and drug delivery in cancer

Tumor-stroma interactions have emerged as critical determinants of drug efficacy. However, the underlying biological and physicochemical mechanisms by which the microenvironment regulates therapeutic response remain unclear, due in part to a lack of physiologically relevant in vitro platforms to accurately interrogate tissue-level phenomena. Tissue-engineered tumor models are beginning to address this shortcoming. By allowing selective incorporation of microenvironmental complexity, these platforms afford unique access to tumor-associated signaling and transport dynamics. This review will focus on engineering approaches to study drug delivery as a function of tumor-associated changes of the vasculature and extracellular matrix (ECM). First, we review current biological understanding of these components and discuss their impact on transport processes. Then, we evaluate existing microfluidic, tissue engineering, and materials science strategies to recapitulate vascular and ECM characteristics of tumors, and finish by outlining challenges and future directions of the field that may ultimately improve anti-cancer therapies.

Nano/microfibrous polymeric constructs loaded with bioactive agents and designed for tissue engineering applications: a review

Nano/microfibrous polymeric constructs present various inherent advantages, such as highly porous architecture and high surface to volume ratio, making them attractive for tissue engineering purposes. Electrospinning is the most preferred technique for the fabrication of polymeric nanofibrous assemblies that can mimic the physical functions of native extracellular matrix greatly favoring cells attachment and thus influencing their morphology and activities. Different approaches have been developed to apply polymeric microfiber fabrication techniques (e.g. wet-spinning) for the obtainment of scaffolds with a three-dimensional network of micropores suitable for effective cells migration. Progress in additive manufacturing technology has led to the development of complex scaffold's shapes and microfibrous structures with a high degree of automation, good accuracy and reproducibility. Various loading methods, such as direct blending, coaxial electrospinning and microparticles incorporation, are enabling to develop customized strategies for the biofunctionalization of nano/microfibrous scaffolds with a tailored kinetics of release of different bioactive agents, ranging from small molecules, such as antibiotics, to protein drugs, such as growth factors, and even cells. Recent activities on the combination of different processing techniques and loading methods for the obtainment of biofunctionalized polymeric constructs with a complex multiscale structure open new possibilities for the development of biomimetic scaffolds endowed with a hierarchical architecture and a sophisticated release kinetics of different bioactive agents. This review is aimed at summarizing current advances in technologies and methods for manufacturing nano/microfibrous polymeric constructs suitable as tissue engineering scaffolds, and for their combination with different bioactive agents to promote tissue regeneration and therapeutic effects.

Electrospun scaffolds for tissue engineering of vascular grafts

There is a growing demand for off-the-shelf tissue engineered vascular grafts (TEVGs) for the replacement or bypass of damaged arteries in various cardiovascular diseases. Scaffolds from the decellularized tissue skeletons to biopolymers and biodegradable synthetic polymers have been used for fabricating TEVGs. However, several issues have not yet been resolved, which include the inability to mimic the mechanical properties of native tissues, and the ability for long-term patency and growth required for in vivo function. Electrospinning is a popular technique for the production of scaffolds that has the potential to address these issues. However, its application to human TEVGs has not yet been achieved. This review provides an overview of tubular scaffolds that have been prepared by electrospinning with potential for TEVG applications.

Surface-Coated Polylactide Fiber Meshes as Tissue Engineering Matrices with Enhanced Cell Integration Properties

Poly(L-lactide-co-D/L-lactide)-based fiber meshes resembling structural features of the native extracellular matrix have been prepared by electrospinning. Subsequent coating of the electrospun fibers with an ultrathin plasma-polymerized allylamine (PPAAm) layer after appropriate preactivation with continuous O2/Ar plasma changed the hydrophobic nature of the polylactide surface into a hydrophilic polymer network and provided positively charged amino groups on the fiber surface able to interact with negatively charged pericellular matrix components. In vitro cell experiments using different human cell types (epithelial origin: gingiva and uroepithelium; bone cells: osteoblasts) revealed that the PPAAm-activated surfaces promoted the occupancy of the meshes by cells accompanied by improved initial cell spreading. This nanolayer is stable in its cell adhesive characteristics also afterγ-sterilization. An in vivo study in a rat intramuscular implantation model demonstrated that the local inflammatory tissue response did not differ between PPAAm-coated and untreated polylactide meshes.

Advancements in electrospinning of polymeric nanofibrous scaffolds for tissue engineering

Polymeric nanofibers have potential as tissue engineering scaffolds, as they mimic the nanoscale properties and structural characteristics of native extracellular matrix (ECM). Nanofibers composed of natural and synthetic polymers, biomimetic composites, ceramics, and metals have been fabricated by electrospinning for various tissue engineering applications. The inherent advantages of electrospinning nanofibers include the generation of substrata with high surface area-to-volume ratios, the capacity to precisely control material and mechanical properties, and a tendency for cellular in-growth due to interconnectivity within the pores. Furthermore, the electrospinning process affords the opportunity to engineer scaffolds with micro- to nanoscale topography similar to the natural ECM. This review describes the fundamental aspects of the electrospinning process when applied to spinnable natural and synthetic polymers; particularly, those parameters that influence fiber geometry, morphology, mesh porosity, and scaffold mechanical properties. We describe cellular responses to fiber morphology achieved by varying processing parameters and highlight successful applications of electrospun nanofibrous scaffolds when used to tissue engineer bone, skin, and vascular grafts.