Dynamic culturing of cartilage tissue: the significance of hydrostatic pressure

Mechanoresponsive musculoskeletal tissue differentiation of adipose-derived stem cells

Musculoskeletal tissues are constantly under mechanical strains within their microenvironment. Yet, little is understood about the effect of in vivo mechanical milieu strains on cell development and function. Thus, this review article outlines the in vivo mechanical environment of bone, muscle, cartilage, tendon, and ligaments, and tabulates the mechanical strain and stress in these tissues during physiological condition, vigorous, and moderate activities. This review article further discusses the principles of mechanical loading platforms to create physiologically relevant mechanical milieu in vitro for musculoskeletal tissue regeneration. A special emphasis is placed on adipose-derived stem cells (ADSCs) as an emerging valuable tool for regenerative musculoskeletal tissue engineering, as they are easily isolated, expanded, and able to differentiate into any musculoskeletal tissue. Finally, it highlights the current state-of-the art in ADSCs-guided musculoskeletal tissue regeneration under mechanical loading.

Nanomechanics of Engineered Articular Cartilage: Synergistic Influences of Transforming Growth Factor-β3 and Oscillating Pressure

Articular cartilage (AC), tissue with the lowest volumetric cellular density, is not supplied with blood and nerve tissue resulting in limited ability for self-repair upon injury. Because there is no treatment capable of fully restoring damaged AC, tissue engineering is being investigated. The emphasis of this field is to engineer functional tissues in vitro in bioreactors capable of mimicking in vivo envi- ronments required for appropriate cellular growth and differentiation. In a step towards engineering AC, human adipose-derived stem cells were differentiated in a unique centrifugal bioreactor under oscillating hydrostatic pressure (OHP) and supply of transforming growth factor beta 3 (TGF-β3) that mimic in vivo environments. Static micromass and pellet cultures were used as controls. Since withstanding and absorbing loads are among the main functions of an AC, mechanical properties of the engineered AC tissues were assayed using atomic force microscopy (AFM) under a controlled indentation depth of 100 nm. Young's moduli of elasticity were quantified by modeling AFM force-indentation data using the Hertz model of contact mechanics. We found exposure to OHP causes cartilage constructs to have 45-fold higher Young's moduli compared to static cultures. Addition of TGF-β3 further increases Young's moduli in bioreactor samples by 1.9-fold bringing it within 70.6% of the values estimated for native cartilage. Our results imply that OHP and TGF-β3 act synergistically to improve the mechanics of engineered tissues.

Dynamic 3D culture: models of chondrogenesis and endochondral ossification

The formation of cartilage from stem cells during development is a complex process which is regulated by both local growth factors and biomechanical cues, and results in the differentiation of chondrocytes into a range of subtypes in specific regions of the tissue. In fetal development cartilage also acts as a precursor scaffold for many bones, and mineralization of this cartilaginous bone precursor occurs through the process of endochondral ossification. In the endochondral formation of bones during fetal development the interplay between cell signalling, growth factors, and biomechanics regulates the formation of load bearing bone, in addition to the joint capsule containing articular cartilage and synovium, generating complex, functional joints from a single precursor anlagen. These joint tissues are subsequently prone to degeneration in adult life and have poor regenerative capabilities, and so understanding how they are created during development may provide useful insights into therapies for diseases, such as osteoarthritis, and restoring bone and cartilage lost in adulthood. Of particular interest is how these tissues regenerate in the mechanically dynamic environment of a living joint, and so experiments performed using 3D models of cartilage development and endochondral ossification are proving insightful. In this review, we discuss some of the interesting models of cartilage development, such as the chick femur which can be observed in ovo, or isolated at a specific developmental stage and cultured organotypically in vitro. Biomaterial and hydrogel-based strategies which have emerged from regenerative medicine are also covered, allowing researchers to make informed choices on the characteristics of the materials used for both original research and clinical translation. In all of these models, we illustrate the essential importance of mechanical forces and mechanotransduction as a regulator of cell behavior and ultimate structural function in cartilage.

Arthroscopic airbrush assisted cell implantation for cartilage repair in the knee: a controlled laboratory and human cadaveric study

OBJECTIVE

The objective of this study was to investigate the feasibility of arthroscopic airbrush assisted cartilage repair.

METHODS

An airbrush device (Baxter) was used to spray both human expanded osteoarthritic chondrocytes and choncrocytes with their pericellular matrix (chondrons) at 1 × 10(6) cells/ml fibrin glue (Tissucol, Baxter) in vitro. Depth-dependent cell viability was assessed for both methods with confocal microscopy. Constructs were cultured for 21 days to assess matrix production. A controlled human cadaveric study (n = 8) was performed to test the feasibility of the procedure in which defects were filled with either arthroscopic airbrushing or needle extrusion. All knees were subjected to 60 min of continuous passive motion and scored on outline attachment and defect filling.

RESULTS

Spraying both chondrocytes and chondrons in fibrin glue resulted in a homogenous cell distribution throughout the scaffold. No difference in viability or matrix production between application methods was found nor between chondrons and chondrocytes. The cadaveric study revealed that airbrushing was highly feasible, and that defect filling through needle extrusion was more difficult to perform based on fibrin glue adhesion and gravity-induced seepage. Defect outline and coverage scores were consistently higher for extrusion, albeit not statistically significant.

CONCLUSION

Both chondrons and chondrocytes can be evenly distributed in a sprayed fibrin glue scaffold without affecting viability while supporting matrix production. The airbrush technology is feasible, easier to perform than needle extrusion and allows for reproducible arthroscopic filling of cartilage defects.

Infrapatellar fat pad-derived stem cells maintain their chondrogenic capacity in disease and can be used to engineer cartilaginous grafts of clinically relevant dimensions

A therapy for regenerating large cartilaginous lesions within the articular surface of osteoarthritic joints remains elusive. While tissue engineering strategies such as matrix-assisted autologous chondrocyte implantation can be used in the repair of focal cartilage defects, extending such approaches to the treatment of osteoarthritis will require a number of scientific and technical challenges to be overcome. These include the identification of an abundant source of chondroprogenitor cells that maintain their chondrogenic capacity in disease, as well as the development of novel approaches to engineer scalable cartilaginous grafts that could be used to resurface large areas of damaged joints. In this study, it is first demonstrated that infrapatellar fat pad-derived stem cells (FPSCs) isolated from osteoarthritic (OA) donors possess a comparable chondrogenic capacity to FPSCs isolated from patients undergoing ligament reconstruction. In a further validation of their functionality, we also demonstrate that FPSCs from OA donors respond to the application of physiological levels of cyclic hydrostatic pressure by increasing aggrecan gene expression and the production of sulfated glycosaminoglycans. We next explored whether cartilaginous grafts could be engineered with diseased human FPSCs using a self-assembly or scaffold-free approach. After examining a range of culture conditions, it was found that continuous supplementation with both transforming growth factor-β3 (TGF-β3) and bone morphogenic protein-6 (BMP-6) promoted the development of tissues rich in proteoglycans and type II collagen. The final phase of the study sought to scale-up this approach to engineer cartilaginous grafts of clinically relevant dimensions (≥2 cm in diameter) by assembling FPSCs onto electrospun PLLA fiber membranes. Over 6 weeks in culture, it was possible to generate robust, flexible cartilage-like grafts of scale, opening up the possibility that tissues engineered using FPSCs derived from OA patients could potentially be used to resurface large areas of joint surfaces damaged by trauma or disease.

Strategies for osteochondral repair: Focus on scaffolds

Interest in osteochondral repair has been increasing with the growing number of sports-related injuries, accident traumas, and congenital diseases and disorders. Although therapeutic interventions are entering an advanced stage, current surgical procedures are still in their infancy. Unlike other tissues, the osteochondral zone shows a high level of gradient and interfacial tissue organization between bone and cartilage, and thus has unique characteristics related to the ability to resist mechanical compression and restoration. Among the possible therapies, tissue engineering of osteochondral tissues has shown considerable promise where multiple approaches of utilizing cells, scaffolds, and signaling molecules have been pursued. This review focuses particularly on the importance of scaffold design and its role in the success of osteochondral tissue engineering. Biphasic and gradient composition with proper pore configurations are the basic design consideration for scaffolds. Surface modification is an essential technique to improve the scaffold function associated with cell regulation or delivery of signaling molecules. The use of functional scaffolds with a controllable delivery strategy of multiple signaling molecules is also considered a promising therapeutic approach. In this review, we updated the recent advances in scaffolding approaches for osteochondral tissue engineering.

EFFECTS OF SHORT-TERM CYCLIC HYDROSTATIC PRESSURE ON INITIATING AND ENHANCING THE EXPRESSION OF CHONDROGENIC GENES IN HUMAN ADIPOSE-DERIVED MESENCHYMAL STEM CELLS

Cartilage tissue engineering is a promising treatment for damaged or diseased cartilage that requires thorough understanding of influential parameters involved in chondrogenic differentiation. This study examined how 4-h application of cyclic hydrostatic pressure (CHP) of 5 MPa at 0.5 Hz could modulate chondroinduction of human adipose-derived mesenchymal stem cells (hAMSCs) in vitro. Four groups were examined including a negative control group, a chemical group treated by growth factor for 10 days, a mechanical group exposed to 4-h loading on the 10th day of pellet culture without any chondrogenic stimulator, and finally a chemical-mechanical group subjected to both growth factor and loading. Application of cyclic hydrostatic pressure increased the expression of chondrogenic genes, including sox9 and aggrecan to higher levels than those of the chemical group. This study indicates that cyclic hydrostatic pressure initiates and enhances the chondrogenic differentiation of mesenchymal stem cells with or without growth factors in vitro and confirms the important role of hydrostatic pressure during chondrogenesis in vivo.

Connexin43 hemichannels mediate small molecule exchange between chondrocytes and matrix in biomechanically-stimulated temporomandibular joint cartilage

OBJECTIVE

Connexin (Cx) 43 hemichannels play a role in mechanotransduction. This study was undertaken in order to determine if Cx43 hemichannels were activated in rat temporomandibular joint (TMJ) chondrocytes under mechanical stimulation.

METHODS

Sprague-Dawley rats were stimulated dental-mechanically. Cx43 expression in rat TMJ cartilage was determined with immunohistochemistry and real-time PCR, and Cx43 hemichannel opening was evaluated by the extra- and intracellular levels of prostaglandin E2 (PGE2). Both primary rat chondrocytes and ATDC5 cells were treated with fluid flow shear stress (FFSS) to induce hemichannel opening. The Cx43 expression level was then determined by real-time PCR or Western blotting, and the extent of Cx43 hemichannel opening was evaluated by measuring both PGE2 release and cellular dye uptake.

RESULTS

Cx43 expression and intra- and extracellular PGE2 levels were increased in mechanically-stimulated rat TMJ cartilage compared to the unstimulated control. The FFSS treatment increased Cx43 expression and induced Cx43 hemichannel opening in primary rat chondrocytes and ATDC5 cells indicated by enhanced PGE2 release and dye uptake. Furthermore, the Cx43 hemichannel opening could be blocked by the addition of 18β-glycyrrhetinic acid, a Cx channel inhibitor, Cx43-targeting siRNA, or by withdrawal of FFSS stimulation. The migration of cytosolic Cx43 protein to the plasma membrane in ATDC5 cells was still significant after 8 h post 2-h FFSS treatment, and the Cx43 protein level was still high at 48 h, which returned to control levels at 72 h after treatment.

CONCLUSION

Cx43 hemichannels are activated and mediate small molecule exchange between TMJ chondrocytes and matrix under mechanical stimulation.

Off-loading of cyclic hydrostatic pressure promotes production of extracellular matrix by chondrocytes

The addition of cyclic hydrostatic pressure (cHP) to cell culture medium has been used to promote extracellular matrix (ECM) production by articular chondrocytes. Though a combination of cHP followed by atmospheric pressure (AP) has been examined previously, the rationale of such a combination was unclear. We compared the effects of loading once versus twice (combinations of cHP followed by AP) regarding both gene expression and biochemical and histological phenotypes of chondrocytes. Isolated bovine articular chondrocytes were embedded in a collagen gel and incubated for 14 days under conditions combining cHP and AP. The gene expression of aggrecan core protein and collagen type II were upregulated in response to cHP, and those levels were maintained for at least 4 days after cHP treatment. Accumulation of cartilage-specific sulfated glycosaminoglycans following cHP for 7 days and subsequent AP for 7 days was significantly greater than that of the AP control (p < 0.05). Therefore, incubation at AP after loading with cHP was found to beneficially affect ECM accumulation. Manipulating algorithms of cHP combined with AP will be useful in producing autologous chondrocyte-based cell constructs for implantation.

Cyclic hydrostatic pressure promotes a stable cartilage phenotype and enhances the functional development of cartilaginous grafts engineered using multipotent stromal cells isolated from bone marrow and infrapatellar fat pad

The objective of this study was to investigate how joint specific biomechanical loading influences the functional development and phenotypic stability of cartilage grafts engineered in vitro using stem/progenitor cells isolated from different source tissues. Porcine bone marrow derived multipotent stromal cells (BMSCs) and infrapatellar fat pad derived multipotent stromal cells (FPSCs) were seeded in agarose hydrogels and cultured in chondrogenic medium, while simultaneously subjected to 10MPa of cyclic hydrostatic pressure (HP). To mimic the endochondral phenotype observed in vivo with cartilaginous tissues engineered using BMSCs, the culture media was additionally supplemented with hypertrophic factors, while the loss of phenotype observed in vivo with FPSCs was induced by withdrawing transforming growth factor (TGF)-β3 from the media. The application of HP was found to enhance the functional development of cartilaginous tissues engineered using both BMSCs and FPSCs. In addition, HP was found to suppress calcification of tissues engineered using BMSCs cultured in chondrogenic conditions and acted to maintain a chondrogenic phenotype in cartilaginous grafts engineered using FPSCs. The results of this study point to the importance of in vivo specific mechanical cues for determining the terminal phenotype of chondrogenically primed multipotent stromal cells. Furthermore, demonstrating that stem or progenitor cells will appropriately differentiate in response to such biophysical cues might also be considered as an additional functional assay for evaluating their therapeutic potential.

Clinical translation of stem cells: insight for cartilage therapies

The limited regenerative capacity of articular cartilage and deficiencies of current treatments have motivated the investigation of new repair technologies. In vitro cartilage generation using primary cell sources is limited by cell availability and expansion potential. Pluripotent stem cells possess the capacity for chondrocytic differentiation and extended expansion, providing a potential future solution to cell-based cartilage regeneration. However, despite successes in producing cartilage using adult and embryonic stem cells, the translation of these technologies to the clinic has been severely limited. This review discusses recent advances in stem cell-based cartilage tissue engineering and the major current limitations to clinical translation of these products. Concerns regarding appropriate animal models and studies, stem cell manufacturing, and relevant regulatory processes and guidelines will be addressed. Understanding the significant hurdles limiting the clinical use of stem cell-based cartilage may guide future developments in the fields of tissue engineering and regenerative medicine.