SecYEG assembles into a tetramer to form the active protein translocation channel

Oligomeric states of the SecA and SecYEG core components of the bacterial Sec translocon

Many proteins synthesized in the cytoplasm ultimately function in non-cytoplasmic locations. In Escherichia coli, the general secretory (Sec) pathway transports the vast majority of these proteins. Two fundamental components of the Sec transport pathway are the SecYEG heterotrimeric complex that forms the channel through the cytoplasmic membrane, and SecA, the ATPase that drives the preprotein to and across the membrane. This review focuses on what is known about the oligomeric states of these core Sec components and how the oligomeric state might change during the course of the translocation of a preprotein.

Helical distribution of the bacterial chemoreceptor via colocalization with the Sec protein translocation machinery

In Escherichia coli, chemoreceptor clustering at a cell pole seems critical for signal amplification and adaptation. However, little is known about the mechanism of localization itself. Here we examined whether the aspartate chemoreceptor (Tar) is inserted directly into the polar membrane by using its fusion to green fluorescent protein (GFP). After induction of Tar–GFP, fluorescent spots first appeared in lateral membrane regions, and later cell poles became predominantly fluorescent. Unexpectedly, Tar–GFP showed a helical arrangement in lateral regions, which was more apparent when a Tar–GFP derivative with two cysteine residues in the periplasmic domain was cross-linked to form higher oligomers. Moreover, similar distribution was observed even when the cytoplasmic domain of the double cysteine Tar–GFP mutant was replaced by that of the kinase EnvZ, which does not localize to a pole. Observation of GFP–SecE and a translocation-defective MalE–GFP mutant, as well as indirect immunofluorescence microscopy on SecG, suggested that the general protein translocation machinery (Sec) itself is arranged into a helical array, with which Tar is transiently associated. The Sec coil appeared distinct from the MreB coil, an actin-like cytoskeleton. These findings will shed new light on the mechanisms underlying spatial organization of membrane proteins in E. coli.

Protein secretion in the Archaea: multiple paths towards a unique cell surface

Archaea are similar to other prokaryotes in most aspects of cell structure but are unique with respect to the lipid composition of the cytoplasmic membrane and the structure of the cell surface. Membranes of archaea are composed of glycerol-ether lipids instead of glycerol-ester lipids and are based on isoprenoid side chains, whereas the cell walls are formed by surface-layer proteins. The unique cell surface of archaea requires distinct solutions to the problem of how proteins cross this barrier to be either secreted into the medium or assembled as appendages at the cell surface.

Molecular dynamics studies of the archaeal translocon

The translocon is a protein-conducting channel conserved over all domains of life that serves to translocate proteins across or into membranes. Although this channel has been well studied for many years, the recent discovery of a high-resolution crystal structure opens up new avenues of exploration. Taking advantage of this, we performed molecular dynamics simulations of the translocon in a fully solvated lipid bilayer, examining the translocation abilities of monomeric SecYEbeta by forcing two helices comprised of different amino acid sequences to cross the channel. The simulations revealed that the so-called plug of SecYEbeta swings open during translocation, closing thereafter. Likewise, it was established that the so-called pore ring region of SecYEbeta forms an elastic, yet tight, seal around the translocating oligopeptides. The closed state of the channel was found to block permeation of all ions and water molecules; in the open state, ions were blocked. Our results suggest that the SecYEbeta monomer is capable of forming an active channel.

Protein translocation by the Sec61/SecY channel

The conserved protein-conducting channel, referred to as the Sec61 channel in eukaryotes or the SecY channel in eubacteria and archaea, translocates proteins across cellular membranes and integrates proteins containing hydrophobic transmembrane segments into lipid bilayers. Structural studies illustrate how the protein-conducting channel accomplishes these tasks. Three different mechanisms, each requiring a different set of channel binding partners, are employed to move polypeptide substrates: The ribosome feeds the polypeptide chain directly into the channel, a ratcheting mechanism is used by the eukaryotic endoplasmic reticulum chaperone BiP, and a pushing mechanism is utilized by the bacterial ATPase SecA. We review these translocation mechanisms, relating biochemical and genetic observations to the structures of the protein-conducting channel and its binding partners.

Biogenesis of inner membrane proteins in Escherichia coli

Gram-negative bacteria such as Escherichia coli are surrounded by two membranes, the inner membrane and the outer membrane. The biogenesis of most inner membrane proteins (IMPs), typical alpha-helical proteins, appears to follow a partly conserved cotranslational pathway. Targeting involves a relatively simple signal recognition particle (SRP) and SRP-receptor. Insertion of most IMPs into the membrane occurs via the Sec-translocon, which is also used for the vectorial transport of secretory proteins. Similar to eukaryotic systems, little is known about the later stages of biogenesis of IMPs, the folding and assembly in the lipid bilayer. Recently, YidC has been identified as a factor that assists in the integration, folding, and assembly of IMPs both in association with the Sec-translocon and separately. This review deals mainly with recent structural and biochemical data from various experimental systems that offer new insight into the different stages of biogenesis of E. coli IMPs.

The Brl domain in Sec63p is required for assembly of functional endoplasmic reticulum translocons

Protein translocation into the endoplasmic reticulum occurs at pore-forming structures known as translocons. In yeast, two different targeting pathways converge at a translocation pore formed by the Sec61 complex. The signal recognition particle-dependent pathway targets nascent precursors co-translationally, whereas the Sec62p-dependent pathway targets polypeptides post-translationally. In addition to the Sec61 complex, both pathways also require Sec63p, an integral membrane protein of the Hsp40 family, and Kar2p, a soluble Hsp70 located in the ER lumen. Using a series of mutant alleles, we demonstrate that a conserved Brl (Brr2-like) domain in the COOH-terminal cytosolic region of Sec63p is essential for function both in vivo and in vitro. We further demonstrate that this domain is required for assembly of two oligomeric complexes of 350 and 380 kDa, respectively. The larger of these corresponds to the heptameric "SEC complex" required for post-translational translocation. However, the 350-kDa complex represents a newly defined hexameric SEC' complex comprising Sec61p, Sss1p, Sbh1p, Sec63p, Sec71p, and Sec72p. Our data indicate that the SEC' complex is required for co-translational protein translocation across the yeast ER membrane.

The structure of the bacterial protein translocation complex SecYEG

Proteins destined for secretion, membrane insertion or organellar import contain signal sequences that direct them to the membrane. Once there, transport machines receive and translocate them appropriately across or into the membrane. The related SecY and Sec61 protein translocation complexes are ubiquitous components of machines that are essential for protein transport. They co-operate with various partners such that the substrate polypeptide is pulled or pushed through the membrane by post- or co-translational mechanisms. In bacteria and archaea, the SecY complex (SecYEG/SecYEbeta) is a heterotrimer, which associates with ribosomes so that the polypeptide is threaded through the channel during its synthesis. Bacteria possess an additional pathway, whereby the newly synthesized substrate protein is maintained in an unfolded conformation and is engaged by the ATPase SecA and delivered to the translocon. Recent medium- (cryo-electron microscopy) and high-resolution (X-ray) structures of the Sec complex have dramatically increased our understanding about how proteins pass through membranes, but have posed a number of new questions. The Sec complex is active as an oligomer, but the structure indicates that the protein-conducting channel is formed by a monomer of SecYEG. Structures of the membrane-bound dimer of Escherichia coli SecYEG and the detergent-solubilized monomer of Methanococcus jannaschii SecYEbeta will be described and discussed in the context of the mechanism that underlies protein secretion and membrane insertion.

Atomic model of the E. coli membrane-bound protein translocation complex SecYEG

The Sec complex forms the core of a conserved machinery transporting proteins across or into membranes. In Escherichia coli SecYEG is active as an oligomer, but the structure predicts that the protein-conducting channel is formed by the monomer. A homology model of the E.coli complex was built using the atomic structure of Methanococcus jannaschii SecYEbeta. Another structure of the membrane-bound dimer was then determined by fitting the homology model to an 8A map of SecYEG determined by electron microscopy. We found that the substrate-binding site of the dimer has opened slightly and the plug domain moved toward the outside. This new position retains the channel in a closed state. These differences partially reflect the movements that have been proposed to occur during channel gating. Further opening of the substrate-binding pocket to bind and release bound substrate and displacement of the plug during secretion, presumably rely on the action of the partner proteins. The contacts arising at the dimer interface in the environment of the lipid bilayer may have activated the assembly.

High-yield expression, reconstitution and structure of the recombinant, fully functional glutamate transporter GLT-1 from Rattus norvegicus

The glutamate transporter GLT-1 from Rattus norvegicus was expressed at high level in BHK cells using the Semliki Forest virus expression system. BHK cells infected with viral particles carrying the GLT-1 gene exhibited 30-fold increased aspartate uptake compared to control cells. The expression level of GLT-1 as determined by binding of labelled substrate to membrane preparations was about 3.5 x 10(6) functional transporters per cell, or 61 pmol GLT-1 per milligram of membrane protein. Purification of the His-tagged protein by Ni2+-NTA affinity chromatography enabled the routine production and purification of milligram quantities of fully functional transporter. Transport activity required reducing conditions and the addition of extra lipid throughout the purification. The apparent molecular mass of the recombinant transporter was 73 kDa or 55 kDa, corresponding to the glycosylated and non-glycosylated form, respectively. Both forms were active upon separation on a lectin column and reconstitution into liposomes. Glycosylated and non-glycosylated GLT-1 were transported to the plasma membrane with equal efficiency. Our results show that N-glycosylation does not affect the trafficking or the transport activity of GLT-1. The low-resolution structure of GLT-1 was determined by electron microscopy and single particle reconstruction.

The oligomeric distribution of SecYEG is altered by SecA and translocation ligands

The multimeric membrane protein complex translocase mediates the transport of preproteins across and integration of membrane proteins into the inner membrane of Escherichia coli. The translocase consists of the peripheral membrane-associated ATPase SecA and the heterotrimeric channel-forming complex consisting of SecY, SecE and SecG. We have investigated the quaternary structure of the SecYEG complex in proteoliposomes. Fluorescence resonance energy transfer demonstrates that SecYEG forms oligomers when embedded in the membrane. Freeze-fracture techniques were used to examine the oligomeric composition under non-translocating and translocating conditions. Our data show that membrane-embedded SecYEG exists in a concentration-dependent equilibrium between monomers, dimers and tetramers, and that dynamic exchange of subunits between oligomers can occur. Remarkably, the formation of dimers and tetramers in the lipid environment is stimulated significantly by membrane insertion of SecA and by the interaction with translocation ligands SecA, preprotein and ATP, suggesting that the active translocation channel consists of multiple SecYEG complexes.

A dual function for SecA in the assembly of single spanning membrane proteins in Escherichia coli

The assembly of bacterial membrane proteins with large periplasmic loops is an intrinsically complex process because the SecY translocon has to coordinate the signal recognition particle-dependent targeting and integration of transmembrane domains with the SecA-dependent translocation of the periplasmic loop. The current model suggests that the ATP hydrolysis by SecA is required only if periplasmic loops larger than 30 amino acids have to be translocated. In agreement with this model, our data demonstrate that the signal recognition particle- and SecA-dependent multiple spanning membrane protein YidC becomes SecA-independent if the large periplasmic loop connecting transmembrane domains 1 and 2 is reduced to less than 30 amino acids. Strikingly, however, we were unable to render single spanning membrane proteins SecA-independent by reducing the length of their periplasmic loops. For these proteins, the complete assembly was always SecA-dependent even if the periplasmic loop was reduced to 13 amino acids. If, however, the 13-amino acid-long periplasmic loop was fused to a downstream transmembrane domain, SecA was no longer required for complete translocation. Although these data support the current model on the SecA dependence of multiple spanning membrane proteins, they indicate a novel function of SecA for the assembly of single spanning membrane proteins. This could suggest that single and multiple spanning membrane proteins are processed differently by the bacterial SecY translocon.

Sequential triage of transmembrane segments by Sec61alpha during biogenesis of a native multispanning membrane protein

During polytopic protein biogenesis, the Sec61 translocon must rapidly orient and integrate multiple transmembrane segments (TMs) into the endoplasmic reticulum membrane. To understand this process, we examined interactions between Sec61alpha and all six TMs of the aquaporin-4 (AQP4) water channel at defined stages of synthesis using incorporated photo-cross-linking probes. Each TM interacted with and moved through the translocon in a highly ordered and sequential fashion. Strong asymmetric Sec61alpha cross-linking was observed for only one helix at a time, suggesting the presence of a single primary binding site. However, up to four TMs simultaneously contacted Sec61alpha from different molecular environments. Thus, AQP4 integration by Sec61alpha involves sequential triage of TMs from their initial portal of entry into multiple secondary sites within the translocon. This mechanism provides a means to facilitate early folding events before release into the lipid bilayer.

Investigating the SecY plug movement at the SecYEG translocation channel

Protein translocation occurs across the energy-conserving bacterial membrane at the SecYEG channel. The crystal structure of the channel has revealed a possible mechanism for gating and opening. This study evaluates the plug hypothesis using cysteine crosslink experiments in combination with various allelic forms of the Sec complex. The results demonstrate that the SecY plug domain moves away from the center of the channel toward SecE during polypeptide translocation, and further show that the translocation-enhancing prlA3 mutation and SecG subunit change the properties of channel gating. Locking the plug in the open state preactivates the Sec complex, and a super-active translocase can be created when combined with the prlA4 mutation located in the pore of the channel. Dimerization of the Sec complex, which is essential for translocase activity, relocates the plug toward the open position. We propose that oligomerization may result in SecYEG cooperative interactions important to prime the translocon function.

Sec, drugs and rock'n'roll: antibiotic targeting of bacterial protein translocation

A large number of bacterial proteins are active in extracytoplasmic locations. Targeting and membrane translocation of the vast majority of these secretory and membrane polypeptides is mediated by the Sec pathway. Protein secretion requires the co-ordinated and sequential action of targeting factors on the cis-side of the membrane, a complex membrane-embedded protein translocase and maturation enzymes on the trans-side. Recently, significant advances in the molecular genetics and biochemistry of the Sec pathway have revealed that several of the Sec pathway components are essential for bacterial viability and/or pathogenicity. Moreover, several biochemical assays and structural insights have become available. Importantly, some of the Sec components are unique to bacteria. These developments raise the possibility that the bacterial protein translocase and other Sec pathway components could become formidable targets for antibacterial drug discovery.

Disulfide bridge formation between SecY and a translocating polypeptide localizes the translocation pore to the center of SecY

During their biosynthesis, many proteins pass through the membrane via a hydrophilic channel formed by the heterotrimeric Sec61/SecY complex. Whether this channel forms at the interface of multiple copies of Sec61/SecY or is intrinsic to a monomeric complex, as suggested by the recently solved X-ray structure of the Methanococcus jannaschii SecY complex, is a matter of contention. By introducing a single cysteine at various positions in Escherichia coli SecY and testing its ability to form a disulfide bond with a single cysteine in a translocating chain, we provide evidence that translocating polypeptides pass through the center of the SecY complex. The strongest cross-links were observed with residues that would form a constriction in an hourglass-shaped pore. This suggests that the channel makes only limited contact with a translocating polypeptide, thus minimizing the energy required for translocation.

Functional and structural characterization of the minimal Sec translocase of the hyperthermophile Thermotoga maritima

The genome of the hyperthermophilic bacterium Thermotoga maritima contains the genes that encode core subunits of the protein translocase, a complex consisting of the molecular motor SecA and the protein conducting pore SecYE. In addition, we identified an erroneous sequence in the genome encoding for a putative secG gene. The genes of the T. maritima translocase subunits were overexpressed in Escherichia coli and purified to homogeneity. T. maritima SecA showed a basal thermostable ATPase activity that was stimulated up to 4-fold by phospholipids with an optimum at 74 degrees C. Membrane vesicles and proteoliposomes containing SecYE or SecYEG supported 2- to 4-fold stimulation of the precursor dependent SecA ATPase activity. Imaging of small two-dimensional crystals of the SecYE complex using electron microscopy showed square-shaped particles with a side-length of about 6 nm. These results demonstrate that in T. maritima a highly thermostable translocase complex is operational.

Architecture of the ribosome-channel complex derived from native membranes

The mammalian Sec61 complex forms a protein translocation channel whose function depends upon its interaction with the ribosome and with membrane proteins of the endoplasmic reticulum (ER). To study these interactions, we determined structures of "native" ribosome-channel complexes derived from ER membranes. We find that the ribosome is linked to the channel by seven connections, but the junction may still provide a path for domains of nascent membrane proteins to move into the cytoplasm. In addition, the native channel is significantly larger than a channel formed by the Sec61 complex, due to the presence of a second membrane protein. We identified this component as TRAP, the translocon-associated protein complex. TRAP interacts with Sec61 through its transmembrane domain and has a prominent lumenal domain. The presence of TRAP in the native channel indicates that it may play a general role in translocation. Crystal structures of two Sec61 homologues were used to model the channel. This analysis indicates that there are four Sec61 complexes and two TRAP molecules in each native channel. Thus, we suggest that a single Sec61 complex may form a conduit for translocating polypeptides, while three copies of Sec61 play a structural role or recruit accessory factors such as TRAP.

Recombinant protein secretion in Escherichia coli

The secretory production of recombinant proteins by the Gram-negative bacterium Escherichia coli has several advantages over intracellular production as inclusion bodies. In most cases, targeting protein to the periplasmic space or to the culture medium facilitates downstream processing, folding, and in vivo stability, enabling the production of soluble and biologically active proteins at a reduced process cost. This review presents several strategies that can be used for recombinant protein secretion in E. coli and discusses their advantages and limitations depending on the characteristics of the target protein to be produced.

Conformational State of the SecYEG-Bound SecA Probed by Single Tryptophan Fluorescence Spectroscopy

The SecYEG complex is a membrane-embedded channel that permits the passage of precursor proteins (preproteins) across the inner membrane of Escherichia coli. SecA is a molecular motor that associates with the SecYEG pore and drives the stepwise translocation of preproteins across the membrane through multiple cycles of ATP binding and hydrolysis. We have investigated the conformational state of soluble and SecYEG-bound SecA using single tryptophan mutants of SecA. The fluorescence spectral properties of the single tryptophans of SecA and their accessibility to the quencher acrylamide demonstrate that SecA undergoes a conformational change that results in a more compact structure upon binding of ATP and binding to the SecYEG pore. In addition, SecYEG-bound SecA undergoes ATP-dependent conformational changes that are not observed for soluble SecA. These data support a model in which binding to the SecYEG channel has a major impact on the SecA conformation.

Structure and function of SecA, the preprotein translocase nanomotor

Most secretory proteins that are destined for the periplasm or the outer membrane are exported through the bacterial plasma membrane by the Sec translocase. Translocase is a complex nanomachine that moves processively along its aminoacyl polymeric substrates effectively pumping them to the periplasmic space. The salient features of this process are: (a) a membrane-embedded "clamp" formed by the trimeric SecYEG protein, (b) a "motor" provided by the dimeric SecA ATPase, (c) regulatory subunits that optimize catalysis and (d) both chemical and electrochemical metabolic energy. Significant recent strides have allowed structural, biochemical and biophysical dissection of the export reaction. A model incorporating stepwise strokes of the translocase nanomachine at work is discussed.

The role of lipids in membrane insertion and translocation of bacterial proteins

Phospholipids are essential building blocks of membranes and maintain the membrane permeability barrier of cells and organelles. They provide not only the bilayer matrix in which the functional membrane proteins reside, but they also can play direct roles in many essential cellular processes. In this review, we give an overview of the lipid involvement in protein translocation across and insertion into the Escherichia coli inner membrane. We describe the key and general roles that lipids play in these processes in conjunction with the protein components involved. We focus on the Sec-mediated insertion of leader peptidase. We describe as well the more direct roles that lipids play in insertion of the small coat proteins Pf3 and M13. Finally, we focus on the role of lipids in membrane assembly of oligomeric membrane proteins, using the potassium channel KcsA as model protein. In all cases, the anionic lipids and lipids with small headgroups play important roles in either determining the efficiency of the insertion and assembly process or contributing to the directionality of the insertion process.

The Outer Membrane Usher Forms a Twin-pore Secretion Complex

The PapC usher is an outer membrane protein required for assembly and secretion of P pili in uropathogenic Escherichia coli. P pilus biogenesis occurs by the chaperone/usher pathway, a terminal branch of the general secretory pathway. Periplasmic chaperone-subunit complexes target to the PapC usher for fiber assembly and secretion through the usher to the cell surface. The molecular details of pilus biogenesis at the usher, and protein secretion across the outer membrane in general, are unclear. We studied the structure and oligomeric state of PapC by gel filtration, dynamic light scattering, and electron microscopy and image analysis. Two-dimensional crystals of wild-type PapC and a C-terminal deletion mutant of PapC were produced by reconstituting detergent purified usher into E.coli lipids. PapC formed a dimer both in detergent solution and in the phospholipid bilayer. Cryo-electron microscopy revealed that the usher forms a twin-pore complex. Removal of the C-terminal domain did not change the basic shape of the PapC molecule, but altered the dimeric association of the usher, suggesting that the C terminus forms part of the dimerization interface. The overall molecular size (11 nm), pore size (2 nm), and twin-pore configuration of PapC resemble that of the Tom40 complex, a mitochondrial outer membrane protein translocase.

Demonstration of a specific Escherichia coli SecY-signal peptide interaction

Protein translocation in Escherichia coli is initiated by the interaction of a preprotein with the membrane translocase composed of a motor protein, SecA ATPase, and a membrane-embedded channel, the SecYEG complex. The extent to which the signal peptide region of the preprotein plays a role in SecYEG interactions is unclear, in part because studies in this area typically employ the entire preprotein. Using a synthetic signal peptide harboring a photoaffinity label in its hydrophobic core, we examined this interaction with SecYEG in a detergent micellar environment. The signal peptide was found to specifically bind SecY in a saturable manner and at levels comparable to those that stimulate SecA ATPase activity. Chemical and proteolytic cleavage of cross-linked SecY and analysis of the signal peptide adducts indicate that the binding was primarily to regions of the protein containing transmembrane domains seven and two. The signal peptide-SecY interaction was affected by the presence of SecA and nucleotides in a manner consistent with the transfer of signal peptide to SecY upon nucleotide hydrolysis at SecA.

The protein-conducting channel SecYEG

In bacteria, the translocase mediates the translocation of proteins into or across the cytosolic membrane. It consists of a membrane embedded protein-conducting channel and a peripherally associated motor domain, the ATPase SecA. The channel is formed by SecYEG, a multimeric protein complex that assembles into oligomeric forms. The structure and subunit composition of this protein-conducting channel is evolutionary conserved and a similar system is found in the endoplasmic reticulum of eukaryotes and the cytoplasmic membrane of archaea. The ribosome and other membrane proteins can associate with the protein-conducting channel complex and affect its activity or functionality.

The bacterial protein-translocation complex: SecYEG dimers associate with one or two SecA molecules

In bacteria, the Sec-protein transport complex facilitates the passage of most secretory and membrane proteins across and into the plasma membrane. The core complex SecYEG forms the protein channel and engages either ribosomes or the ATPase SecA, which drive translocation of unfolded polypeptide chains through the complex and into the periplasmic space. Escherichia coli SecYEG forms dimers in membranes, but in detergent solution the population of these dimers is low. However, we find that stable dimers can be assembled by the addition of a monoclonal antibody. Normally, a stable SecYEG-SecA complex can only form on isolated membranes or on reconstituted proteo-liposomes. The antibody-stabilised SecYEG dimer binds one SecA molecule in detergent solution. In the presence of AMPPNP, a non-hydrolysable analogue of ATP, a complex forms containing one antibody and two each of SecYEG and SecA. SecYEG monomers or tetramers do not associate to a significant degree with SecA. The observed variability in the stoichiometry of SecYEG and SecA association and its nucleotide modulation may be important and necessary for the protein translocation reaction.

Getting out: protein traffic in prokaryotes

Protein secretion systems in prokaryotes are increasingly shifting from being considered as experimental models for 'more complex' processes (i.e. eukaryotes) to being a major source of key biological questions in their own right. The pathways by which proteins move between compartments or insert into membranes in prokaryotic cells are certainly less numerous than in eukaryotes (though not dramatically so). However, the quality and complexity of bacterial protein targeting systems indicate that virtually all mechanistic problems associated with protein traffic were solved very efficiently well before eukaryotes appeared on the Earth crust. Indeed, recent studies have both increased the number of known prokaryotic protein traffic systems and indicated new layers of complexity for those that were already well characterized. This report describes some recent developments in bacterial protein traffic that were presented at two meetings in the autumn of 2003.

Structural insight into the protein translocation channel

A structurally conserved protein translocation channel is formed by the heterotrimeric Sec61 complex in eukaryotes, and SecY complex in archaea and bacteria. Electron microscopy studies suggest that the channel may function as an oligomeric assembly of Sec61 or SecY complexes. Remarkably, the recently determined X-ray structure of an archaeal SecY complex indicates that the pore is located at the center of a single molecule of the complex. This structure suggests how the pore opens perpendicular to the plane of the membrane to allow the passage of newly synthesized secretory proteins across the membrane and opens laterally to allow transmembrane segments of nascent membrane proteins to enter the lipid bilayer. The electron microscopy and X-ray results together suggest that only one copy of the SecY or Sec61 complex within an oligomer translocates a polypeptide chain at any given time.

F1F0 ATP synthase subunit c is a substrate of the novel YidC pathway for membrane protein biogenesis

The Escherichia coli YidC protein belongs to the Oxa1 family of membrane proteins that have been suggested to facilitate the insertion and assembly of membrane proteins either in cooperation with the Sec translocase or as a separate entity. Recently, we have shown that depletion of YidC causes a specific defect in the functional assembly of F₁F₀ ATP synthase and cytochrome o oxidase. We now demonstrate that the insertion of in vitro–synthesized F₁F₀ ATP synthase subunit c (F₀c) into inner membrane vesicles requires YidC. Insertion is independent of the proton motive force, and proteoliposomes containing only YidC catalyze the membrane insertion of F₀c in its native transmembrane topology whereupon it assembles into large oligomers. Co-reconstituted SecYEG has no significant effect on the insertion efficiency. Remarkably, signal recognition particle and its membrane-bound receptor FtsY are not required for the membrane insertion of F₀c. In conclusion, a novel membrane protein insertion pathway in E. coli is described in which YidC plays an exclusive role.

Global co-ordination of protein translocation by the SecA IRA1 switch

SecA, the dimeric ATPase subunit of protein translocase, contains a DEAD helicase catalytic core that binds to a regulatory C-terminal domain. We now demonstrate that IRA1, a conserved helix-loop-helix structure in the C-domain, controls C-domain conformation through direct interdomain contacts. C-domain conformational changes are transmitted to the DEAD motor and alter its conformation. These interactions establish DEAD motor/C-domain conformational cross-talk that requires a functional IRA1. IRA1-controlled binding/release cycles of the C-domain to the DEAD motor couple this cross-talk to protein translocation chemistries, i.e. DEAD motor affinities for ligands (nucleotides, preprotein signal peptides, and SecYEG, the integral membrane component of translocase) and ATP turnover. IRA1-mediated global co-ordination of SecA catalysis is essential for protein translocation.

Functional activity of eukaryotic signal sequences in Escherichia coli: the ovalbumin family of serine protease inhibitors

It is widely assumed that the functional activity of signal sequences has been conserved throughout evolution, at least between Gram-negative bacteria and eukaryotes. The ovalbumin family of serine protease inhibitors (serpins) provides a unique tool to test this assumption, since individual members can be secreted (ovalbumin), cytosolic (leukocyte elastase inhibitor, LEI), or targeted to both compartments (plasminogen activator inhibitor 2, PAI-2). The facultative secretion of PAI-2 is mediated by a signal sequence proposed to be inefficient by design. We show here that the same internal domain that promotes an inefficient translocation of murine PAI-2 in mammalian cells is a weak signal sequence in Escherichia coli. In contrast, the ovalbumin signal sequence is much more efficient, whereas the corresponding sequence elements from LEI, maspin and PI-10 are entirely devoid of signal sequence activity in E.coli. Mutations that improve the activity of the PAI-2 signal sequence and that convert the N-terminal regions of maspin and PI-10 into efficient signal sequences have been characterized. Taken together, these results indicate that several structural features contribute to the weak activity of the PAI-2 signal sequence and provide new insights into the plasticity of the "hydrophobic core" of signal sequences. High-level expression of two chimeric proteins containing the PAI-2 signal sequence is toxic, and the reduced viability is accompanied by a rapid decrease in the membrane proton motive force, in ATP levels and in translation. In unc- cells, which lack the F0F1 ATP-synthase, the chimeric proteins retain their toxicity and their expression only affected the proton motive force. Thus, the properties of these toxic signal sequences offer a new tool to dissect the interactions of signal sequences with the protein export machinery.

SecYEG Proteoliposomes Catalyze the Δϕ-Dependent Membrane Insertion of FtsQ

In Escherichia coli, the insertion of most inner membrane proteins is mediated by the Sec translocase. Ribosome-bound nascent chains of Sec-dependent inner membrane proteins are targeted to the SecYEG complex via the signal recognition particle pathway. We now demonstrate that the signal recognition particle-dependent co-translational membrane targeting and membrane insertion of FtsQ can be reconstituted with proteoliposomes containing purified SecYEG. SecA and a transmembrane electrical potential are essential for the translocation of the large periplasmic domain of FtsQ, whereas co-reconstituted YidC has an inhibitory effect. These data demonstrate that membrane protein insertion can be reconstituted with a minimal set of purified Sec components.

Translocon "pulling" of nascent SecM controls the duration of its translational pause and secretion-responsive secA regulation

SecA is an ATPase and motor protein that drives protein translocation across the bacterial plasma membrane. In Escherichia coli SecA levels are regulated by the secretion needs of the cell utilizing secM, which encodes a secreted protein. Previous studies demonstrated that this regulation requires a translational pause within secM, whose duration regulates the accessibility of the secA Shine-Dalgarno sequence on secM secA mRNA. Here we provide evidence that translocon "pulling" of nascent SecM is what regulates the duration of the secM translational pause, and thus secA expression levels, thereby providing direct support for this model.

X-ray structure of a protein-conducting channel

A conserved heterotrimeric membrane protein complex, the Sec61 or SecY complex, forms a protein-conducting channel, allowing polypeptides to be transferred across or integrated into membranes. We report the crystal structure of the complex from Methanococcus jannaschii at a resolution of 3.2 A. The structure suggests that one copy of the heterotrimer serves as a functional translocation channel. The alpha-subunit has two linked halves, transmembrane segments 1-5 and 6-10, clamped together by the gamma-subunit. A cytoplasmic funnel leading into the channel is plugged by a short helix. Plug displacement can open the channel into an 'hourglass' with a ring of hydrophobic residues at its constriction. This ring may form a seal around the translocating polypeptide, hindering the permeation of other molecules. The structure also suggests mechanisms for signal-sequence recognition and for the lateral exit of transmembrane segments of nascent membrane proteins into lipid, and indicates binding sites for partners that provide the driving force for translocation.

Two-stage binding of SecA to the bacterial translocon regulates ribosome-translocon interaction

The bacterial translocon interacts with both SecA-bound preproteins and nascent chain-ribosome complexes during Sec and signal recognition particle-dependent protein translocation, respectively. In their inactive state, translocons are saturated with ribosomes and SecA protein, reflecting the inherent affinity of these components for one another. We found that SecA and ribosomes are bound simultaneously and noncompetitively to a common set of inactive translocons. Furthermore, we demonstrate that at a later stage in binding, SecA possesses a ribosome-translocon dissociation activity that is coupled to its ATP-dependent membrane insertion and retraction cycle that drives protein translocation. This novel activity is presumably important in the commitment of the translocon to the Sec-dependent pathway. These results also provide a rationale for the compatibility and regulation of multiple protein translocation pathways that each makes distinct demands on a common translocon core.

Membrane protein reconstitution and crystallization by controlled dilution

Efficient reconstitution of membrane proteins for functional analyses can be achieved by dilution of a ternary mixture containing proteins, lipids and detergents. Once the dilution reaches the point where the free detergent concentration would become lower than the critical micellar concentration, detergent is recruited from the bound detergent pool, and association of proteins and lipids is initiated. Here we show that dilution is also suitable for the assembly of two-dimensional crystals. A device has been designed that allows controlled dilution of a protein-lipid-detergent mixture to induce formation of densely packed or crystalline proteoliposomes. Turbidity is used to monitor the progress of reconstitution on-line, while dilution is achieved by computer-controlled addition of buffer solution in sub-microliter steps. This system has mainly been tested with porin OmpF, a typical beta-barrel protein, and aquaporin-1, a typical alpha-helical protein. The results demonstrate that large, highly ordered two-dimensional crystals can be produced by the dilution method.

YidC is strictly required for membrane insertion of subunits a and c of the F(1)F(0)ATP synthase and SecE of the SecYEG translocase

YidC was previously discovered to play a critical role for the insertion of the Sec-independent M13 procoat and Pf3 coat phage proteins into the Escherichia coli inner membrane. To determine whether there is an absolute requirement of YidC for membrane protein insertion of any endogenous E. coli proteins, we investigated a few representative membrane proteins. We found that membrane subunits of the F(0) sector of the F(1)F(0)ATP synthase and the SecE protein of the SecYEG translocase are highly dependent on YidC for membrane insertion, based on protease mapping and immunoblot analysis. We found that the SecE dependency on YidC for membrane insertion does not contradict the observation that depletion of YidC does not block SecYEG-dependent protein export at 37 degrees C. YidC depletion does not decrease the SecE level low enough to block export at 37 degrees C. In contrast, we found that protein export of OmpA is severely blocked at 25 degrees C when YidC is depleted, which may be due to the decreased SecE level, as a 50% decrease in the SecE levels drastically affects protein export at the cold temperature [Schatz, P. J., Bieker, K. L., Ottemann, K. M., Silhavy, T. J., and Beckwith, J. (1991) EMBO J. 10, 1749-57]. These studies reported here establish that physiological substrates of YidC include subunits of the ATP synthase and the SecYEG translocase, demonstrating that YidC plays a vital role for insertion of endogenous membrane proteins in bacteria.

Nucleotide binding induces changes in the oligomeric state and conformation of Sec A in a lipid environment: a small-angle neutron-scattering study

In Escherichia coli, SecA is a large, multifunctional protein that is a vital component of the general protein secretion pathway. In its membrane-bound form it functions as the motor component of the protein translocase, perhaps through successive rounds of membrane insertion and ATP hydrolysis. To understand both the energy conversion process and translocase assembly, we have used contrast-matched, small-angle neutron-scattering (SANS) experiments to examine SecA in small unilamellar vesicles of E.coli phospholipids. In the absence of nucleotide, we observe a dimeric form of SecA with a radius of gyration comparable to that previously observed for SecA in solution. In contrast, the presence of either ADP or a non-hydrolyzable ATP analog induces conversion to a monomeric form. The larger radius of gyration for the ATP-bound relative to the ADP-bound form suggests the former has a more expanded global conformation. This is the first direct structural determination of SecA in a lipid bilayer. The SANS data indicate that nucleotide turnover can function as a switch of conformation of SecA in the membrane in a manner consistent with its proposed role in successive cycles of deep membrane penetration and release with concommitant preprotein insertion.

Binding, activation and dissociation of the dimeric SecA ATPase at the dimeric SecYEG translocase

The bacterial preprotein translocase is comprised of a membrane-embedded oligomeric SecYEG structure and a cytosolic dimeric SecA ATPase. The associations within SecYEG oligomers and SecA dimers, as well as between these two domains are dynamic and reversible. Here, it is shown that a covalently linked SecYEG dimer forms a functional translocase and a high affinity binding site for monomeric and dimeric SecA in solution. The interaction between these two domains stimulates the SecA ATPase, and nucleotides modulate the affinity and ratio of SecA monomers and dimers bound to the linked SecYEG complex. During the translocation reaction, the SecA monomer remains in stable association with a SecYEG protomer and the translocating preprotein. The nucleotides and translocation-dependent changes of SecA-SecYEG associations and the SecA dimeric state may reflect important facets of the preprotein translocation reaction.

Depletion of SecDF-YajC causes a decrease in the level of SecG: implication for their functional interaction

SecA and an apparatus comprising SecYEG and SecDF-YajC complexes catalyze protein translocation across the Escherichia coli membrane. SecDF-YajC and SecG facilitate membrane insertion of SecA, which is the driving force for protein translocation. Here we report that SecDF-YajC depletion together with SecG depletion nearly completely inhibits protein translocation both in vivo and in vitro, although SecDF-YajC had been thought to be unnecessary for in vitro translocation. The level of SecG in membranes decreased to about half upon SecDF-YajC depletion and recovered to a normal level when SecDF-YajC was expressed. SecDF-YajC inhibited disulfide bond formation between two SecG molecules possessing a single cysteine residue. These results suggest functional interaction between SecDF-YajC and SecG.

Direct demonstration of ATP-dependent release of SecA from a translocating preprotein by surface plasmon resonance

Translocase mediates the transport of preproteins across the inner membrane of Escherichia coli. SecA binds with high affinity to the membrane-embedded protein-conducting SecYEG complex and serves as both a receptor for secretory proteins and as an ATP-driven molecular motor. Cycles of ATP binding and hydrolysis by SecA drive the progressive movement of the preprotein across the membrane. Surface plasmon resonance allows an online monitoring of protein interactions. Here we report on the kinetic analysis of the interaction between SecA and the membrane-embedded SecYEG complex. Immobilization of membrane vesicles containing overproduced SecYEG on the Biacore Pioneer L1 chip allows the detection of high affinity SecA binding to the SecYEG complex and online monitoring of the translocation of the secretory protein proOmpA. SecA binds tightly to the SecYEG.proOmpA complex and is released only upon ATP hydrolysis. The results provide direct evidence for a model in which SecA cycles at the SecYEG complex during translocation.

Bacillus subtilis SecA ATPase exists as an antiparallel dimer in solution

SecA ATPase promotes the biogenesis of membrane and secretory proteins into and across the cytoplasmic membrane of Eubacteria. SecA binds to translocon component SecYE and substrate proteins and undergoes ATP-dependent conformational cycles that are coupled to the stepwise translocation of proteins. Our recent crystal structure of B. subtilis SecA [Hunt, J. F., Weinkauf, S., Henry, L., Fak, J. J., McNicholas, P., Oliver, D. B., and Deisenhofer, J. (2002) Science 297, 2018-2026] showed two different dimer interactions in the lattice which both buried significant solvent-accessible surface area in their interface and could potentially be responsible for formation of the physiological dimer in solution. In this paper, we utilize fluorescence resonance energy transfer methodology with genetically engineered SecA proteins containing unique pairs of tryptophan and fluorophore-labeled cysteine residues to determine the oligomeric structure of SecA protein in solution. Our results show that of the two dimers interactions observed in the crystal structure, SecA forms an antiparallel dimer in solution that maximizes the buried solvent-accessible surface area and intermolecular contacts. At the submicromolar protein concentrations used in the fluorescence experiments, we saw no evidence for the formation of higher-order oligomers of SecA based on either the alternative dimer or the 3(1) helical fiber observed in the crystal lattice. Our studies are consistent with previous ones demonstrating the existence of a dimerization determinant within the C-domain of SecA as well as those documenting the interaction of N- and C-domains of SecA. Our results also provide a valuable starting point for a determination of whether the subunit status of SecA changes during the protein translocation as well as studies designed to elucidate the conformational dynamics of this multidomain protein during its translocation cycle.

Nearest neighbor analysis of the SecYEG complex. 1. Identification of a SecY-SecG interface

Integral membrane components SecY, SecE, and SecG of protein translocase form a complex in the Escherichia coli plasma membrane. To characterize subunit interactions of the SecYEG complex, a series of SecY variants having a single cysteine in its cytoplasmic (C1-C6) or periplasmic (P1-P5) domain were subjected to site-specific cross-linking experiments using bifunctional agents with thiol-amine reactivity. Experiments using inverted membrane vesicles revealed specific cross-linkings between a cysteine residue placed in the C2 or C3 domain of SecY and the cytosolic lysine (Lys26) near the first transmembrane segment of SecG. These SecY Cys residues also formed a disulfide bond with an engineered cytosolic cysteine at position 28 of SecG. Thus, the C2-C3 region of SecY is in the proximity of the N-terminal half of the SecG cytoplasmic loop. Experiments using spheroplasts revealed the physical proximity of P2 (SecY) and the C-terminal periplasmic region of SecG. In addition, mutations in secG were isolated as suppressors against a cold-sensitive mutation (secY104) affecting the TM4-C3 boundary of SecY. These results collectively suggest that a C2-TM3-P2-TM4-C3 region of SecY serves as an interface with SecG.

Nearest neighbor analysis of the SecYEG complex. 2. Identification of a SecY-SecE cytosolic interface

Although the importance of interactions involving both the cytosolic and transmembrane regions of SecY and SecE has been documented, no information has been available for the physical contact sites of these translocase subunits in their cytosolic domains. We now carried out site-specific cross-linking experiments to identify SecY and SecE regions that are physically close. Cysteines introduced into SecY residue 244 in the fourth cytosolic domain (C4) as well as into residues 354-356 and 362 in the C5 domain could be cross-linked with natural or engineered residues at positions 79 and 81 in the central part of the cytosolic loop of SecE. These cross-linkages were abolished by the Gly240 mutation in the SecY C4 region as well as by prlG alterations in SecE transmembrane segment 3, known to compromise SecY-SecE interaction. We suggest that the cytosolic and intramembrane interactions bring these two subunits together, forming a functionally crucial SecYE interface involving the SecY C5 region and the conserved cytosolic segment of SecE.

Signal recognition particle-dependent protein targeting, universal to all kingdoms of life

The signal recognition particle (SRP) and its membrane-bound receptor represent a ubiquitous protein-targeting device utilized by organisms as different as bacteria and humans, archaea and plants. The unifying concept of SRP-dependent protein targeting is that SRP binds to signal sequences of newly synthesized proteins as they emerge from the ribosome. In eukaryotes this interaction arrests or retards translation elongation until SRP targets the ribosome-nascent chain complexes via the SRP receptor to the translocation channel. Such channels are present in the endoplasmic reticulum of eukaryotic cells, the thylakoids of chloroplasts, or the plasma membrane of prokaryotes. The minimal functional unit of SRP consists of a signal sequence-recognizing protein and a small RNA. The as yet most complex version is the mammalian SRP whose RNA, together with six proteinaceous subunits, undergo an intricate assembly process. The preferential substrates of SRP possess especially hydrophobic signal sequences. Interactions between SRP and its receptor, the ribosome, the signal sequence, and the target membrane are regulated by GTP hydrolysis. SRP-dependent protein targeting in bacteria and chloroplasts slightly deviate from the canonical mechanism found in eukaryotes. Pro- and eukaryotic cells harbour regulatory mechanisms to prevent a malfunction of the SRP pathway.

Importance of transmembrane segments in Escherichia coli SecY

To assess the functional importance of the transmembrane regions of SecY, we constructed a series of SecY variants, in which the six central residues of each transmembrane segment were replaced by amino acid residues from either transmembrane segment 3 or 4 of LacY. The SecY function, as assessed by the ability to complement cold-sensitive secYmutants with respect to their growth and translocase defects, was eliminated by the alterations in transmembrane segments 2, 3, 4, 7, 9 and 10. Among them, those in segments 3 and 4 had especially severe effects. In contrast, transmembrane segments 1, 5, 6, and 8 were more tolerant to the sequence alterations. The purified protein with an altered transmembrane segment 6 retained, in large measure, the ability to support SecA-dependent preprotein translocation in vitro. These results will help us to further understand how the SecYEG protein translocation channel functions.