Analysis of binding of the family 2a carbohydrate-binding module from Cellulomonas fimi xylanase 10A to cellulose: specificity and identification of functionally important amino acid residues

Quantitative approaches to the analysis of carbohydrate-binding module function

Carbohydrate-binding modules (CBMs) are important components of carbohydrate-active enzymes. Their primary functions are to assist in substrate turnover by targeting appended catalytic modules to substrate and concentrating appended catalytic modules on the surface of substrate. Presented here are four well-established methodologies for investigating and quantifying the CBM-polysaccharide binding relationship. These methods include: (1) the solid state depletion assay, (2) affinity gel electrophoresis, (3) UV difference and fluorescence spectroscopy, and (4) isothermal titration calorimetry. In addition, entropy-driven CBM-crystalline cellulose binding events and differential approaches to calculating stoichiometry with polyvalent polysaccharide ligands are also discussed.

The lignin present in steam pretreated softwood binds enzymes and limits cellulose accessibility

The influence of cellulose accessibility and protein loading on the efficiency of enzymatic hydrolysis of steam pretreated Douglas-fir was assessed. It was apparent that the lignin component significantly influences the swelling/accessibility of cellulose as at low protein loadings (5FPU/g cellulose), only 16% of the cellulose present in the steam pretreated softwood was hydrolyzed while almost complete hydrolysis was achieved with the delignified substrate. When lignin (isolated from steam pretreated Douglas-fir) was added back in the same proportions it was originally found to the highly accessible and swollen, delignified steam pretreated softwood and to a cellulose control such as Avicel, the hydrolysis yields decreased by 9 and 46%, respectively. However, when higher enzyme loadings were employed, the greater availability of the enzyme could overcome the limitations imposed by both the lignin's restrictions on cellulose accessibility and direct binding of the enzymes, resulting in a near complete hydrolysis of the cellulose.

CBM3d, a novel subfamily of family 3 carbohydrate-binding modules identified in Cel48A exoglucanase of Cellulosilyticum ruminicola

Previously, we found that exoglucanase Cel48A from Cellulosilyticum ruminicola H1 bound intensively to Avicel; however, no known carbohydrate-binding module (CBM) was observed in the protein. Bioinformatics suggested that a C-terminal fragment of 127 amino acids, named the Cellulosilyticum-specific paralogous module (CPM), could function in binding. CPM-appended proteins are all putative (hemi)cellulases from Cellulosilyticum spp. In the present work, we demonstrated that Cel48A without the CPM retained only exoglucanase activity and lost the Avicel-binding ability, while the isolated CPM exhibited a high affinity for Avicel. In addition, the CPM bound to chitin, but not to soluble polysaccharides, making it a type A CBM, which binds only insoluble polysaccharides. Phylogenetic analysis clustered the CPM and its homologs as a separate branch that was distantly related to CBM subfamilies 3a (28% identity), 3b (24% identity), and 3c (21% identity). Sequence alignment revealed distinct secondary structures of the new CBM 3 group, in particular, a conserved Pro66-Trp67 insert preceding strand β4', a deletion preceding strand β6, and incomplete strands β8 and β9. An alanine scan for six aromatic and three nonaromatic amino acid residues (D66, P66, and R111) by site-directed mutagenesis determined that Phe62, Pro66, Trp67, Tyr68, Arg111, and Trp117 were the functional residues for binding. Among them, Phe62, Pro66, and Trp67 were the newly determined key sites in the CPM for binding. Three-dimensional homolog modeling revealed two types of substrate-binding sites, planar and groove, in the CPM. Thus, a new subfamily, CBM family 3d, is proposed.

Structure-function analysis of the bacterial expansin EXLX1

We made use of EXLX1, an expansin from Bacillus subtilis, to investigate protein features essential for its plant cell wall binding and wall loosening activities. We found that the two expansin domains, D1 and D2, need to be linked for wall extension activity and that D2 mediates EXLX1 binding to whole cell walls and to cellulose via distinct residues on the D2 surface. Binding to cellulose is mediated by three aromatic residues arranged linearly on the putative binding surface that spans D1 and D2. Mutation of these three residues to alanine eliminated cellulose binding and concomitantly eliminated wall loosening activity measured either by cell wall extension or by weakening of filter paper but hardly affected binding to whole cell walls, which is mediated by basic residues located on other D2 surfaces. Mutation of these basic residues to glutamine reduced cell wall binding but not wall loosening activities. We propose domain D2 as the founding member of a new carbohydrate binding module family, CBM63, but its function in expansin activity apparently goes beyond simply anchoring D1 to the wall. Several polar residues on the putative binding surface of domain D1 are also important for activity, most notably Asp82, whose mutation to alanine or asparagine completely eliminated wall loosening activity. The functional insights based on this bacterial expansin may be extrapolated to the interactions of plant expansins with cell walls.

Expression and characterization of full-length Ampullaria crossean endoglucanase EG65s and their two functional modules

Three endoglucanase cDNAs, eg65a, eg65b, and eg65c, were cloned from the mollusk Ampullaria crossean in previous work. To characterize the full-length enzymes as well as their individual functional modules via heterologous expression analysis, the three full-length putative endoglucanases (rEG65a, rEG65b, and rEG65c) and the corresponding catalytic modules (EG65a-CM, EG65b-CM, and EG65c-CM) were expressed in Pichia pastoris GS115, and the three corresponding carbohydrate-binding modules (EG65a-CBM, EG65b-CBM, and EG65c-CBM) were expressed in Escherichia coli BL21 (DE3). The properties of recombinant rEG65b, EG65a-CM, EG65b-CM, and EG65c-CM were characterized. Binding assays of CBMs with insoluble polysaccharides indicated that both EG65b-CBM and EG65c-CBM bound to phosphoric-acid swollen cellulose (PASC), Avicel, and oat-spelt xylan, while EG65a-CBM did not. The relative equilibrium constants (K(r)) of EG65b-CBM and EG65c-CBM were determined by absorption isotherm measurements. In this study, the CBMs of animal cellulases were expressed and characterized for the first time.

Structural motif screening reveals a novel, conserved carbohydrate-binding surface in the pathogenesis-related protein PR-5d

BACKGROUND

Aromatic amino acids play a critical role in protein-glycan interactions. Clusters of surface aromatic residues and their features may therefore be useful in distinguishing glycan-binding sites as well as predicting novel glycan-binding proteins. In this work, a structural bioinformatics approach was used to screen the Protein Data Bank (PDB) for coplanar aromatic motifs similar to those found in known glycan-binding proteins.

RESULTS

The proteins identified in the screen were significantly associated with carbohydrate-related functions according to gene ontology (GO) enrichment analysis, and predicted motifs were found frequently within novel folds and glycan-binding sites not included in the training set. In addition to numerous binding sites predicted in structural genomics proteins of unknown function, one novel prediction was a surface motif (W34/W36/W192) in the tobacco pathogenesis-related protein, PR-5d. Phylogenetic analysis revealed that the surface motif is exclusive to a subfamily of PR-5 proteins from the Solanaceae family of plants, and is absent completely in more distant homologs. To confirm PR-5d's insoluble-polysaccharide binding activity, a cellulose-pulldown assay of tobacco proteins was performed and PR-5d was identified in the cellulose-binding fraction by mass spectrometry.

CONCLUSIONS

Based on the combined results, we propose that the putative binding site in PR-5d may be an evolutionary adaptation of Solanaceae plants including potato, tomato, and tobacco, towards defense against cellulose-containing pathogens such as species of the deadly oomycete genus, Phytophthora. More generally, the results demonstrate that coplanar aromatic clusters on protein surfaces are a structural signature of glycan-binding proteins, and can be used to computationally predict novel glycan-binding proteins from 3 D structure.

Characterization and application of carbohydrate-binding modules of beta-1,3-xylanase XYL4

beta-1,3-Xylanase from Vibrio sp. strain AX-4 (XYL4) is a modular enzyme composed of an N-terminal catalytic module belonging to glycoside hydrolase family 26 and two putative carbohydrate-binding modules (CBMs) belonging to family 31 in the C-terminal region. To investigate the functions of these three modules, five deletion mutants lacking individual modules were constructed. The binding assay of these mutants showed that a repeating unit of the CBM was a non-catalytic beta-1,3-xylan-binding module, while the catalytic module per se was not likely to contribute to the binding activity when insoluble beta-1,3-xylan was used for the assay. The repeating CBMs were found to specifically bind to insoluble beta-1,3-xylan, but not to beta-1,4-xylan, Avicel, beta-1,4-mannan, curdlan, chitin or soluble glycol-beta-1,3-xylan. Both the enzyme and the binding activities for insoluble beta-1,3-xylan but not soluble glycol-beta-1,3-xylan were enhanced by NaCl in a concentration-dependent manner, indicating that the CBMs of XYL4 bound to beta-1,3-xylan through hydrophobic interaction. This property of the CBMs was successfully applied to the purification of a recombinant XYL4 from the cell extracts of Escherichia coli transformed with the xyl4 gene and the detection of beta-1,3-xylan-binding proteins including beta-1,3-xylanase from the extract of a turban shell, Turbo cornutus.

Multivalent anchoring and oriented display of single-domain antibodies on cellulose

Antibody engineering has allowed for the rapid generation of binding agents against virtually any antigen of interest, predominantly for therapeutic applications. Considerably less attention has been given to the development of diagnostic reagents and biosensors using engineered antibodies. Recently, we produced a novel pentavalent bispecific antibody (i.e., decabody) by pentamerizing two single-domain antibodies (sdAbs) through the verotoxin B subunit (VTB) and found both fusion partners to be functional. Using a similar approach, we have engineered a bispecific pentameric fusion protein consisting of five sdAbs and five cellulose-binding modules (CBMs) linked via VTB. To find an optimal design format, we constructed six bispecific pentamers consisting of three different CBMs, fused to the Staphylococcus aureus-specific human sdAb HVHP428, in both orientations. One bispecific pentamer, containing an N-terminal CBM9 and C-terminal HVHP428, was soluble, non-aggregating, and did not degrade upon storage at 4 °C for over six months. This molecule was dually functional as it bound to cellulose-based filters as well as S. aureus cells. When impregnated in cellulose filters, the bispecific pentamer recognized S. aureus cells in a flow-through detection assay. The ability of pentamerized CBMs to bind cellulose may form the basis of an immobilization platform for multivalent display of high-avidity binding reagents on cellulosic filters for sensing of pathogens, biomarkers and environmental pollutants.

A kinetic model for the enzymatic action of cellulase

We develop a mechanochemical model for the dynamics of cellulase, a two-domain enzyme connected by a peptide linker, as it extracts and hydrolyzes a cellulose polymer from a crystalline substrate. We consider two random walkers, representing the catalytic domain (CD) and the carbohydrate binding module (CBM), whose rates for stepping are biased by the coupling through the linker and the energy required to lift the cellulose polymer from the crystalline surface. Our results show that the linker length and stiffness play a critical role in the cooperative action of the CD and CBM domains and that, for a given linker length, the steady-state hydrolysis shows a maximum at some intermediate linker stiffness. The maximum hydrolysis rate corresponds to a transition of the linker from a compressed to an extended conformation, where the system exhibits maximum fluctuation, as measured by the variance of the separation distance between the two domains and the dispersion around the mean hydrolysis speed. In the range of experimentally known values of the parameters of our model, improving the intrinsic hydrolytic activity of the CD leads to a proportional increase in the overall hydrolysis rate.

Molecular engineering of the cellulosome complex for affinity and bioenergy applications

The cellulosome complex has evolved to degrade plant cell walls and, as such, combines tenacious binding to cellulose with diverse catalytic activities against amorphous and crystalline cellulose. Cellulolytic microorganisms provide an extensive selection of domains; those with affinity for cellulose, cohesins and their dockerin binding partners that define cellulosome stoichiometry and architecture, and a range of catalytic activities against carbohydrates. These robust domains provide the building blocks for molecular design. This review examines how protein modules derived from the cellulosome have been incorporated into chimaeric proteins to provide biosynthetic tools for research and industry. These applications include affinity tags for protein purification, and non-chemical methods for immobilisation and presentation of recombinant protein domains on cellulosic substrates. Cellulosomal architecture provides a paradigm for design of enzymatic complexes that synergistically combine multiple catalytic subunits to achieve higher specific activity than would be obtained using free enzymes. Multimeric enzymatic complexes may have industrial applications of relevance for an emerging carbon economy. Biocatalysis will lead to more efficient utilisation of renewable carbon-fixing energy sources with the added benefits of reducing chemical waste streams and reliance on petroleum.

Analysis of the Golgi apparatus in Arabidopsis seed coat cells during polarized secretion of pectin-rich mucilage

Differentiation of the Arabidopsis thaliana seed coat cells includes a secretory phase where large amounts of pectinaceous mucilage are deposited to a specific domain of the cell wall. During this phase, Golgi stacks had cisternae with swollen margins and trans-Golgi networks consisting of interconnected vesicular clusters. The proportion of Golgi stacks producing mucilage was determined by immunogold labeling and transmission electron microscopy using an antimucilage antibody, CCRC-M36. The large percentage of stacks found to contain mucilage supports a model where all Golgi stacks produce mucilage synchronously, rather than having a subset of specialist Golgi producing pectin product. Initiation of mucilage biosynthesis was also correlated with an increase in the number of Golgi stacks per cell. Interestingly, though the morphology of individual Golgi stacks was dependent on the volume of mucilage produced, the number was not, suggesting that proliferation of Golgi stacks is developmentally programmed. Mapping the position of mucilage-producing Golgi stacks within developing seed coat cells and live-cell imaging of cells labeled with a trans-Golgi marker showed that stacks were randomly distributed throughout the cytoplasm rather than clustered at the site of secretion. These data indicate that the destination of cargo has little effect on the location of the Golgi stack within the cell.

A Tomato Endo-β-1,4-glucanase, SlCel9C1, Represents a Distinct Subclass with a New Family of Carbohydrate Binding Modules (CBM49)

A critical structural feature of many microbial endo-beta-1,4-glucanases (EGases, or cellulases) is a carbohydrate binding module (CBM), which is required for effective crystalline cellulose degradation. However, CBMs are absent from plant EGases that have been biochemically characterized to date, and accordingly, plant EGases are not generally thought to have the capacity to degrade crystalline cellulose. We report the biochemical characterization of a tomato EGase, Solanum lycopersicum Cel8 (SlCel9C1), with a distinct C-terminal noncatalytic module that represents a previously uncharacterized family of CBMs. In vitro binding studies demonstrated that this module indeed binds to crystalline cellulose and can similarly bind as part of a recombinant chimeric fusion protein containing an EGase catalytic domain from the bacterium Thermobifida fusca. Site-directed mutagenesis studies show that tryptophans 559 and 573 play a role in crystalline cellulose binding. The SlCel9C1 CBM, which represents a new CBM family (CBM49), is a defining feature of a new structural subclass (Class C) of plant EGases, with members present throughout the plant kingdom. In addition, the SlCel9C1 catalytic domain was shown to hydrolyze artificial cellulosic polymers, cellulose oligosaccharides, and a variety of plant cell wall polysaccharides.

Sequence and structural features of carbohydrate binding in proteins and assessment of predictability using a neural network

Background

Protein-Carbohydrate interactions are crucial in many biological processes with implications to drug targeting and gene expression. Nature of protein-carbohydrate interactions may be studied at individual residue level by analyzing local sequence and structure environments in binding regions in comparison to non-binding regions, which provide an inherent control for such analyses. With an ultimate aim of predicting binding sites from sequence and structure, overall statistics of binding regions needs to be compiled. Sequence-based predictions of binding sites have been successfully applied to DNA-binding proteins in our earlier works. We aim to apply similar analysis to carbohydrate binding proteins. However, due to a relatively much smaller region of proteins taking part in such interactions, the methodology and results are significantly different. A comparison of protein-carbohydrate complexes has also been made with other protein-ligand complexes.

Results

We have compiled statistics of amino acid compositions in binding versus non-binding regions- general as well as in each different secondary structure conformation. Binding propensities of each of the 20 residue types and their structure features such as solvent accessibility, packing density and secondary structure have been calculated to assess their predisposition to carbohydrate interactions. Finally, evolutionary profiles of amino acid sequences have been used to predict binding sites using a neural network. Another set of neural networks was trained using information from single sequences and the prediction performance from the evolutionary profiles and single sequences were compared. Best of the neural network based prediction could achieve an 87% sensitivity of prediction at 23% specificity for all carbohydrate-binding sites, using evolutionary information. Single sequences gave 68% sensitivity and 55% specificity for the same data set. Sensitivity and specificity for a limited galactose binding data set were obtained as 63% and 79% respectively for evolutionary information and 62% and 68% sensitivity and specificity for single sequences. Propensity and other sequence and structural features of carbohydrate binding sites have also been compared with our similar extensive studies on DNA-binding proteins and also with protein-ligand complexes.

Conclusion

Carbohydrates typically show a preference to bind aromatic residues and most prominently tryptophan. Higher exposed surface area of binding sites indicates a role of hydrophobic interactions. Neural networks give a moderate success of prediction, which is expected to improve when structures of more protein-carbohydrate complexes become available in future.

Direct demonstration of the flexibility of the glycosylated proline-threonine linker in the Cellulomonas fimi Xylanase Cex through NMR spectroscopic analysis

The modular xylanase Cex (or CfXyn10A) from Cellulomonas fimi consists of an N-terminal catalytic domain and a C-terminal cellulose-binding domain, joined by a glycosylated proline-threonine (PT) linker. To characterize the conformation and dynamics of the Cex linker and the consequences of its modification, we have used NMR spectroscopy to study full-length Cex in its nonglycosylated ( approximately 47 kDa) and glycosylated ( approximately 51 kDa) forms. The PT linker lacks any predominant structure in either form as indicated by random coil amide chemical shifts. Furthermore, heteronuclear (1)H-(15)N nuclear Overhauser effect relaxation measurements demonstrate that the linker is flexible on the ns-to-ps time scale and that glycosylation partially dampens this flexibility. The catalytic and cellulose-binding domains also exhibit identical amide chemical shifts whether in isolation or in the context of either unmodified or glycosylated full-length Cex. Therefore, there are no noncovalent interactions between the two domains of Cex or between either domain and the linker. This conclusion is supported by the distinct (15)N relaxation properties of the two domains, as well as their differential alignment within a magnetic field by Pf1 phage particles. These data demonstrate that the PT linker is a flexible tether, joining the structurally independent catalytic and cellulose-binding domains of Cex in an ensemble of conformations; however, more extended forms may predominate because of restrictions imparted by the alternating proline residues. This supports the postulate that the binding-domain anchors Cex to the surface of cellulose, whereas the linker provides flexibility for the catalytic domain to hydrolyze nearby hemicellulose (xylan) chains.

Understanding the biological rationale for the diversity of cellulose-directed carbohydrate-binding modules in prokaryotic enzymes

Plant cell walls are degraded by glycoside hydrolases that often contain noncatalytic carbohydrate-binding modules (CBMs), which potentiate degradation. There are currently 11 sequence-based cellulose-directed CBM families; however, the biological significance of the structural diversity displayed by these protein modules is uncertain. Here we interrogate the capacity of eight cellulose-binding CBMs to bind to cell walls. These modules target crystalline cellulose (type A) and are located in families 1, 2a, 3a, and 10 (CBM1, CBM2a, CBM3a, and CBM10, respectively); internal regions of amorphous cellulose (type B; CBM4-1, CBM17, CBM28); and the ends of cellulose chains (type C; CBM9-2). Type A CBMs bound particularly effectively to secondary cell walls, although they also recognized primary cell walls. Type A CBM2a and CBM10, derived from the same enzyme, displayed differential binding to cell walls depending upon cell type, tissue, and taxon of origin. Type B CBMs and the type C CBM displayed much weaker binding to cell walls than type A CBMs. CBM17 bound more extensively to cell walls than CBM4-1, even though these type B modules display similar binding to amorphous cellulose in vitro. The thickened primary cell walls of celery collenchyma showed significant binding by some type B modules, indicating that in these walls the cellulose chains do not form highly ordered crystalline structures. Pectate lyase treatment of sections resulted in an increased binding of cellulose-directed CBMs, demonstrating that decloaking cellulose microfibrils of pectic polymers can increase CBM access. The differential recognition of cell walls of diverse origin provides a biological rationale for the diversity of cellulose-directed CBMs that occur in cell wall hydrolases and conversely reveals the variety of cellulose microstructures in primary and secondary cell walls.

Importance of Trp59 and Trp60 in chitin-binding, hydrolytic, and antifungal activities of Streptomyces griseus chitinase C

The chitin-binding domain of Streptomyces griseus chitinase C (ChBD(ChiC)) belongs to CBM family 5. Only two exposed aromatic residues, W59 and W60, were observed in ChBD(ChiC), in contrast to three such residues on CBD(Cel5) in the same CBM family. To study importance of these residues in binding activity and other functions of ChBD(ChiC), site-directed mutagenesis was carried out. Single (W59A and W60A) and double (W59A/W60A) mutations abolished the binding activity of ChiC to colloidal chitin and decreased the hydrolytic activity toward not only colloidal chitin but also a soluble high Mr substrate, glycol chitin. Interaction of ChBD(ChiC) with oligosaccharide was eliminated by these mutations. The hydrolytic activity toward oligosaccharide was increased by deletion of ChBD but not affected by these mutations, indicating that ChBD interferes with oligosaccharide hydrolysis but not through its binding activity. The antifungal activity was drastically decreased by all mutations and significant difference was observed between single and double mutants. Taken together with the structural information, these results suggest that ChBD(ChiC) binds to chitin via a mechanism significantly different from CBD(Cel5), where two aromatic residues play major role, and contributes to various functions of ChiC. Sequence comparison indicated that ChBD(ChiC)-type CBMs are dominant in CBM family 5.

Structural Studies of a Two-domain Chitinase from Streptomyces griseus HUT6037

Chitinase C (ChiC) from Streptomyces griseus HUT6037 was the first glycoside hydrolase family 19 chitinase that was found in an organism other than higher plants. An N-terminal chitin-binding domain and a C-terminal catalytic domain connected by a linker peptide constitute ChiC. We determined the crystal structure of full-length ChiC, which is the only representative of the two-domain chitinases in the family. The catalytic domain has an alpha-helix-rich fold with a deep cleft containing a catalytic site, and lacks three loops on the domain surface compared with the catalytic domain of plant chitinases. The chitin-binding domain is an all-beta protein with two tryptophan residues (Trp59 and Trp60) aligned on the surface. We suggest the binding mechanism of tri-N-acetylchitotriose onto the chitin-binding domain on the basis of molecular dynamics (MD) simulations. In this mechanism, the ligand molecule binds well on the surface-exposed binding site through two stacking interactions and two hydrogen bonds and only Trp59 and Trp60 are involved in the binding. Furthermore, the flexibility of the Trp60 side-chain, which may be involved in adjusting the binding surface to fit the surface of crystalline chitin by the rotation of chi2 angle, is shown.

Xyloglucan is recognized by carbohydrate-binding modules that interact with beta-glucan chains

Enzyme systems that attack the plant cell wall contain noncatalytic carbohydrate-binding modules (CBMs) that mediate attachment to this composite structure and play a pivotal role in maximizing the hydrolytic process. Although xyloglucan, which includes a backbone of beta-1,4-glucan decorated primarily with xylose residues, is a key component of the plant cell wall, CBMs that bind to this polymer have not been identified. Here we showed that the C-terminal domain of the modular Clostridium thermocellum enzyme CtCel9D-Cel44A (formerly known as CelJ) comprises a novel CBM (designated CBM44) that binds with equal affinity to cellulose and xyloglucan. We also showed that accommodation of xyloglucan side chains is a general feature of CBMs that bind to single cellulose chains. The crystal structures of CBM44 and the other CBM (CBM30) in CtCel9D-Cel44A display a beta-sandwich fold. The concave face of both CBMs contains a hydrophobic platform comprising three tryptophan residues that can accommodate up to five glucose residues. The orientation of these aromatic residues is such that the bound ligand would adopt the twisted conformation displayed by cello-oligosaccharides in solution. Mutagenesis studies confirmed that the hydrophobic platform located on the concave face of both CBMs mediates ligand recognition. In contrast to other CBMs that bind to single polysaccharide chains, the polar residues in the binding cleft of CBM44 play only a minor role in ligand recognition. The mechanism by which these proteins are able to recognize linear and decorated beta-1,4-glucans is discussed based on the structures of CBM44 and the other CBMs that bind single cellulose chains.

N-Glycosidase-carbohydrate-binding module fusion proteins as immobilized enzymes for protein deglycosylation

A carbohydrate-binding module (CBM) was fused to the N-termini of mannosyl-glycoprotein endo-beta-N-acetylglucosaminidase (EndoF1) and peptide N-glycosidase F (PNGaseF), two glycosidases from Chryseobacterium meningosepticum that are used to remove N-linked glycans from glycoproteins. The fusion proteins CBM-EndoF1 and CBM-PNGaseF also carry a hexahistidine tag for purification by immobilized metal affinity chromatography after production by Escherichia coli. CBM-EndoF1 is as effective as native EndoF1 at deglycosylating RNaseB; the glycans released by both enzymes are identical. Like native PNGaseF, CBM-PNGaseF is active on denatured but not on native RNaseB. Both fusion proteins are as active on RNaseB when immobilized on cellulose as they are in solution. They retain activity in the immobilized state for at least 1 month at 4 degrees C. The hexahistidine tag can be removed with thrombin, leaving the CBM as the only affinity tag. The CBM can be removed with factor Xa if required.

Probing the Mechanism of Ligand Recognition in Family 29 Carbohydrate-binding Modules

The recycling of photosynthetically fixed carbon, by the action of microbial plant cell wall hydrolases, is integral to one of the major geochemical cycles and is of considerable industrial importance. Non-catalytic carbohydrate-binding modules (CBMs) play a key role in this degradative process by targeting hydrolytic enzymes to their cognate substrate within the complex milieu of polysaccharides that comprise the plant cell wall. Family 29 CBMs have, thus far, only been found in an extracellular multienzyme plant cell wall-degrading complex from the anaerobic fungus Piromyces equi, where they exist as a CBM29-1:CBM29-2 tandem. Here we present both the structure of the CBM29-1 partner, at 1.5 A resolution, and examine the importance of hydrophobic stacking interactions as well as direct and solvent-mediated hydrogen bonds in the binding of CBM29-2 to different polysaccharides. CBM29 domains display unusual binding properties, exhibiting specificity for both beta-manno- and beta-gluco-configured ligands such as mannan, cellulose, and glucomannan. Mutagenesis reveals that "stacking" of tryptophan residues in the n and n+2 subsites plays a critical role in ligand binding, whereas the loss of tyrosine-mediated stacking in the n+4 subsite reduces, but does not abrogate, polysaccharide recognition. Direct hydrogen bonds to ligand, such as those provided by Arg-112 and Glu-78, play a pivotal role in the interaction with both mannan and cellulose, whereas removal of water-mediated interactions has comparatively little effect on carbohydrate binding. The interactions of CBM29-2 with the O2 of glucose or mannose contribute little to binding affinity, explaining why this CBM displays dual gluco/manno specificity.

Structure of a mannan-specific family 35 carbohydrate-binding module: evidence for significant conformational changes upon ligand binding

Enzymes that digest plant cell wall polysaccharides generally contain non-catalytic, carbohydrate-binding modules (CBMs) that function by attaching the enzyme to the substrate, potentiating catalytic activity. Here, we present the first structure of a family 35 CBM, derived from the Cellvibrio japonicus beta-1,4-mannanase Man5C. The NMR structure has been determined for both the free protein and the protein bound to mannopentaose. The data show that the protein displays a typical beta-jelly-roll fold. Ligand binding is not located on the concave surface of the protein, as occurs in many CBMs that display the jelly-roll fold, but is formed by the loops that link the two beta-sheets of the protein, similar to family 6 CBMs. In contrast to the majority of CBMs, which are generally rigid proteins, CBM35 undergoes significant conformational change upon ligand binding. The curvature of the binding site and the narrow binding cleft are likely to be the main determinants of binding specificity. The predicted solvent exposure of O6 at several subsites provides an explanation for the observed accommodation of decorated mannans. Two of the key aromatic residues in Man5C-CBM35 that interact with mannopentaose are conserved in mannanase-derived CBM35s, which will guide specificity predictions based on the primary sequence of proteins in this CBM family.

Carbohydrate-binding modules: fine-tuning polysaccharide recognition

The enzymic degradation of insoluble polysaccharides is one of the most important reactions on earth. Despite this, glycoside hydrolases attack such polysaccharides relatively inefficiently as their target glycosidic bonds are often inaccessible to the active site of the appropriate enzymes. In order to overcome these problems, many of the glycoside hydrolases that utilize insoluble substrates are modular, comprising catalytic modules appended to one or more non-catalytic CBMs (carbohydrate-binding modules). CBMs promote the association of the enzyme with the substrate. In view of the central role that CBMs play in the enzymic hydrolysis of plant structural and storage polysaccharides, the ligand specificity displayed by these protein modules and the mechanism by which they recognize their target carbohydrates have received considerable attention since their discovery almost 20 years ago. In the last few years, CBM research has harnessed structural, functional and bioinformatic approaches to elucidate the molecular determinants that drive CBM-carbohydrate recognition. The present review summarizes the impact structural biology has had on our understanding of the mechanisms by which CBMs bind to their target ligands.

Family 6 carbohydrate binding modules recognize the non-reducing end of beta-1,3-linked glucans by presenting a unique ligand binding surface

Enzymes that hydrolyze insoluble complex polysaccharide structures contain non-catalytic carbohydrate binding modules (CBMS) that play a pivotal role in the action of these enzymes against recalcitrant substrates. Family 6 CBMs (CBM6s) are distinct from other CBM families in that these protein modules contain multiple distinct ligand binding sites, a feature that makes CBM6s particularly appropriate receptors for the beta-1,3-glucan laminarin, which displays an extended U-shaped conformation. To investigate the mechanism by which family 6 CBMs recognize laminarin, we report the biochemical and structural properties of a CBM6 (designated BhCBM6) that is located in an enzyme, which is shown, in this work, to display beta-1,3-glucanase activity. BhCBM6 binds beta-1,3-glucooligosaccharides with affinities of approximately 1 x 10(5) m(-1). The x-ray crystal structure of this CBM in complex with laminarihexaose reveals similarity with the structures of other CBM6s but a unique binding mode. The binding cleft in this protein is sealed at one end, which prevents binding of linear polysaccharides such as cellulose, and the orientation of the sugar at this site prevents glycone extension of the ligand and thus conferring specificity for the non-reducing ends of glycans. The high affinity for extended beta-1,3-glucooligosaccharides is conferred by interactions with the surface of the protein located between the two binding sites common to CBM6s and thus reveals a third ligand binding site in family 6 CBMs. This study therefore demonstrates how the multiple binding clefts and highly unusual protein surface of family 6 CBMs confers the extensive range of specificities displayed by this protein family. This is in sharp contrast to other families of CBMs where variation in specificity between different members reflects differences in the topology of a single binding site.

Glycoside hydrolase carbohydrate-binding modules as molecular probes for the analysis of plant cell wall polymers

Novel molecular probes have been developed for the analysis and detection of polysaccharides in plant cell walls using carbohydrate-binding modules (CBMs) derived from modular glycoside hydrolases belonging to families 2a, 6, and 29. Recombinant forms of these proteins containing his-tags, in conjunction with anti-his-tag detection, provide a flexible system that utilizes CBMs as molecular probes in a range of applications. Assays for the rapid analysis of the binding of CBMs to polysaccharides and oligosaccharides using nitrocellulose-based CBM macroarrays and microtiter plate-based CBM capture and competitive-inhibition assays are described. We also demonstrate the use of CBMs with his-tags for the localization of their target ligands in planta. The generation of molecular probes from other families of CBMs will dramatically increase the repertoire of molecular probes available to determine the developmental and functional aspects of plant cell walls.

High-resolution crystal structures of Caldicellulosiruptor strain Rt8B.4 carbohydrate-binding module CBM27-1 and its complex with mannohexaose

Carbohydrate-binding modules (CBMs) are the most common non-catalytic modules associated with enzymes active in plant cell-wall hydrolysis. Despite the large number of putative CBMs being identified by amino acid sequence alignments, only few representatives have been experimentally shown to have a carbohydrate-binding function. Caldicellulosiruptor strain Rt8B.4 Man26 is a thermostable modular glycoside hydrolase beta-mannanase which contains two non-catalytic modules in tandem at its N terminus. These modules were recently shown to function primarily as beta-mannan-binding modules and have accordingly been classified as members of a novel family of CBMs, family 27. The N-terminal CBM27 (CsCBM27-1) of Man26 from Caldicellulosiruptor Rt8B.4 displays high-binding affinity towards mannohexaose with a Ka of 1 x 10(7) M(-1). Accordingly, the high-resolution crystal structures of CsCBM27-1 native and its mannohexaose complex were solved at 1.55 angstroms and 1.06 angstoms resolution, respectively. In the crystal, CsCBM27-1 shows the typical beta-sandwich jellyroll fold observed in other CBMs with a single metal ion bound, which was identified as calcium. The crystal structures reveal that the overall fold of CsCBM27-1 remains virtually unchanged upon sugar binding and that binding is mediated by three solvent-exposed tryptophan residues and few direct hydrogen bonds. Based on binding affinity and thermal unfolding experiments this structural calcium is shown to play a role in the thermal stability of CsCBM27-1 at high temperatures. The higher binding affinity of CsCBM27-1 to mannooligosaccharides when compared to other members of CBM family 27 might be explained by the different orientation of the residues forming the "aromatic platform" and by differences in the length of loops. Finally, evidence is presented, on the basis of fold similarities and the retention of the position of conserved motifs and a calcium ion, for the consolidation of related CBM families into a superfamily of CBMs.

Mutation of active site residues in the chitin-binding domain ChBDChiA1 from chitinase A1 of Bacillus circulans alters substrate specificity: use of a green fluorescent protein binding assay

A fluorescent binding assay was developed to investigate the effects of mutagenesis on the binding affinity and substrate specificity of the chitin-binding domain of chitinase A1 from Bacillus circulans WL-12. The chitin-binding domain was genetically fused to the N-terminus of a green fluorescent protein, and the polyhistidine-tagged hybrid protein was expressed in Escherichia coli. Residues likely to be involved in the binding site were mutated and their contributions to binding and substrate specificity were evaluated by affinity electrophoresis and depletion assays. The experimental binding isotherms were analyzed by non-linear regression using a modified Langmuir equation. Non-conservative substitution of tryptophan residue (W687) nearly abolished chitin-binding affinity and dramatically lowered chitosan binding while retaining the original level of curdlan binding. Double mutation E668K/P689A had altered specificity for several substrates and also impaired chitin binding significantly. Other substitutions in the binding site altered substrate specificity but had little effect on overall affinity for chitin. Interestingly, mutation T682A led to a higher specificity towards chitinous substrates than the wildtype. Furthermore, the ChBD-GFP hybrid protein was tested for use in diagnostic staining of cell walls of fungi and yeast and for the detection of fungal infections in tissue samples.

Ligand-mediated Dimerization of a Carbohydrate-binding Module Reveals a Novel Mechanism for Protein–Carbohydrate Recognition

The structural and thermodynamic basis for carbohydrate-protein recognition is of considerable importance. NCP-1, which is a component of the Piromyces equi cellulase/hemicellulase complex, presents a provocative model for analyzing how structural and mutational changes can influence the ligand specificity of carbohydrate-binding proteins. NCP-1 contains two "family 29" carbohydrate-binding modules designated CBM29-1 and CBM29-2, respectively, that display unusually broad specificity; the proteins interact weakly with xylan, exhibit moderate affinity for cellulose and mannan, and bind tightly to the beta-1,4-linked glucose-mannose heteropolymer glucomannan. The crystal structure of CBM29-2 in complex with cellohexaose and mannohexaose identified key residues involved in ligand recognition. By exploiting this structural information and the broad specificity of CBM29-2, we have used this protein as a template to explore the evolutionary mechanisms that can lead to significant changes in ligand specificity. Here, we report the properties of the E78R mutant of CBM29-2, which displays ligand specificity that is different from that of wild-type CBM29-2; the protein retains significant affinity for cellulose but does not bind to mannan or glucomannan. Significantly, E78R exhibits a stoichiometry of 0.5 when binding to cellohexaose, and both calorimetry and ultracentrifugation show that the mutant protein displays ligand-mediated dimerization in solution. The three-dimensional structure of E78R in complex with cellohexaose reveals the intriguing molecular basis for this "dimeric" binding mode that involves the lamination of the oligosaccharide between two CBM molecules. The 2-fold screw axis of the ligand is mirrored in the orientation of the two protein domains with adjacent sugar rings stacking against the equivalent aromatic residues in the binding site of each protein molecule of the molecular sandwich. The sandwiching of an oligosaccharide chain between two protein modules, leading to ligand-induced formation of the binding site, represents a completely novel mechanism for protein-carbohydrate recognition that may mimic that displayed by naturally dimeric protein-carbohydrate interactions.

Structural and thermodynamic dissection of specific mannan recognition by a carbohydrate binding module, TmCBM27

The C-terminal 176 amino acids of a Thermotoga maritima mannanase (Man5) constitute a carbohydrate binding module (CBM) that has been classified into CBM family 27. The isolated CBM27 domain, named TmCBM27, binds tightly (K(a)s 10(5)-10(6) M(-1)) to beta-1, 4-mannooligosaccharides, carob galactomannan, and konjac glucomannan, but not to cellulose (insoluble and soluble) or soluble birchwood xylan. The X-ray crystal structures of native TmCBM27, a TmCBM27-mannohexaose complex, and a TmCBM27-6(3),6(4)-alpha-D-galactosyl-mannopentaose complex at 2.0 A, 1.6 A, and 1.35 A, respectively, reveal the basis of TmCBM27's specificity for mannans. In particular, the latter complex, which is the first structure of a CBM in complex with a branched plant cell wall polysaccharide, illustrates how the architecture of the binding site can influence the recognition of naturally substituted polysaccharides.

The modular architecture of Cellvibrio japonicus mannanases in glycoside hydrolase families 5 and 26 points to differences in their role in mannan degradation

beta-1,4-Mannanases (mannanases), which hydrolyse mannans and glucomannans, are located in glycoside hydrolase families (GHs) 5 and 26. To investigate whether there are fundamental differences in the molecular architecture and biochemical properties of GH5 and GH26 mannanases, four genes encoding these enzymes were isolated from Cellvibrio japonicus and the encoded glycoside hydrolases were characterized. The four genes, man5A, man5B, man5C and man26B, encode the mannanases Man5A, Man5B, Man5C and Man26B, respectively. Man26B consists of an N-terminal signal peptide linked via an extended serine-rich region to a GH26 catalytic domain. Man5A, Man5B and Man5C contain GH5 catalytic domains and non-catalytic carbohydrate-binding modules (CBMs) belonging to families 2a, 5 and 10; Man5C in addition contains a module defined as X4 of unknown function. The family 10 and 2a CBMs bound to crystalline cellulose and ivory nut crystalline mannan, displaying very similar properties to the corresponding family 10 and 2a CBMs from Cellvibrio cellulases and xylanases. CBM5 bound weakly to these crystalline polysaccharides. The catalytic domains of Man5A, Man5B and Man26B hydrolysed galactomannan and glucomannan, but displayed no activity against crystalline mannan or cellulosic substrates. Although Man5C was less active against glucomannan and galactomannan than the other mannanases, it did attack crystalline ivory nut mannan. All the enzymes exhibited classic endo-activity producing a mixture of oligosaccharides during the initial phase of the reaction, although their mode of action against manno-oligosaccharides and glucomannan indicated differences in the topology of the respective substrate-binding sites. This report points to a different role for GH5 and GH26 mannanases from C. japonicus. We propose that as the GH5 enzymes contain CBMs that bind crystalline polysaccharides, these enzymes are likely to target mannans that are integral to the plant cell wall, while GH26 mannanases, which lack CBMs and rapidly release mannose from polysaccharides and oligosaccharides, target the storage polysaccharide galactomannan and manno-oligosaccharides.

Recognition and hydrolysis of noncrystalline cellulose

Cellulase Cel5A from alkalophilic Bacillus sp. 1139 contains a family 17 carbohydrate-binding module (BspCBM17) and a family 28 CBM (BspCBM28) in tandem. The two modules have significantly similar amino acid sequences, but amino acid residues essential for binding are not conserved. BspCBM28 was obtained as a discrete polypeptide by engineering the cel5A gene. BspCBM17 could not be obtained as a discrete polypeptide, so a family 17 CBM from endoglucanase Cel5A of Clostridium cellulovorans, CcCBM17, was used to compare the binding characteristics of the two families of CBM. Both CcCBM17 and BspCBM28 recognized two classes of binding sites on amorphous cellulose: a high affinity site (K(a) approximately 1 x 10(6) M(-1)) and a low affinity site (K(a) approximately 2 x 10(4) M(-1)). They did not compete for binding to the high affinity sites, suggesting that they bound at different sites on the cellulose. A polypeptide, BspCBM17/CBM28, comprising the tandem CBMs from Cel5A, bound to amorphous cellulose with a significantly higher affinity than the sum of the affinities of CcCBM17 and BspCBM28, indicating cooperativity between the linked CBMs. Cel5A mutants were constructed that were defective in one or both of the CBMs. The mutants differed from the wild-type enzyme in the amounts and sizes of the soluble products produced from amorphous cellulose. This suggests that either the CBMs can modify the action of the catalytic module of Cel5A or that they target the enzyme to areas of the cellulose that differ in susceptibility to hydrolysis.

The binding specificity and affinity determinants of family 1 and family 3 cellulose binding modules

Cellulose binding modules (CBMs) potentiate the action of cellulolytic enzymes on insoluble substrates. Numerous studies have established that three aromatic residues on a CBM surface are needed for binding onto cellulose crystals and that tryptophans contribute to higher binding affinity than tyrosines. However, studies addressing the nature of CBM-cellulose interactions have so far failed to establish the binding site on cellulose crystals targeted by CBMs. In this study, the binding sites of CBMs on Valonia cellulose crystals have been visualized by transmission electron microscopy. Fusion of the CBMs with a modified staphylococcal protein A (ZZ-domain) allowed direct immuno-gold labeling at close proximity of the actual CBM binding site. The transmission electron microscopy images provide unequivocal evidence that the fungal family 1 CBMs as well as the family 3 CBM from Clostridium thermocellum CipA have defined binding sites on two opposite corners of Valonia cellulose crystals. In most samples these corners are worn to display significant area of the hydrophobic (110) plane, which thus constitutes the binding site for these CBMs.

Carbohydrate-binding modules recognize fine substructures of cellulose

Competition isotherms are used to identify the set of cellulose substructures to which cellulose binding modules (CBMs) from families 2a, 3, 4, 9, and 17 bind. The experiments are based on coupling a unique fluorescent tag to each CBM in a manner that does not alter the natural binding properties of the CBM and therefore allows the surface and solution concentrations of each CBM to be monitored as a function of time and composition. Adsorption and surface exchange of like or competing CBMs are monitored using a range of cellulose preparations varying in both crystallinity and provenance. CBMs from families 2a, 3, 4, 9, and 17 are shown to recognize different physical forms of prepared cellulose. The demonstration of the very fine binding specificity of cellulose-specific CBMs implies that the polysaccharide targets of CBMs extend down to the resolution of cellulose microstructures.

Biochemical characterization of Thermotoga maritima endoglucanase Cel74 with and without a carbohydrate binding module (CBM)

The genome of the hyperthermophilic bacterium Thermotoga maritima (Tm) encodes at least eight glycoside hydrolases with putative signal peptides; the biochemical characteristics of seven of these have been reported previously. The eighth, Tm Cel74, is encoded by an open reading frame of 2124 bp corresponding to a polypeptide of 79 kDa with a signal peptide at the amino-terminus. The gene (lacking the signal peptide) encoding Tm Cel74 was expressed as a 77 kDa monomeric polypeptide in Escherichia coli and found to be optimally active at pH 6, 90 degrees C, with a melting temperature of approximately 105 degrees C. The cel74 gene was previously found to be induced during T. maritima growth on a variety of polysaccharides, including barley glucan, carboxymethyl cellulose (CMC), glucomannan, galactomannan and starch. However, while Tm Cel74 was most active towards barley glucan and to a lesser extent CMC, glucomannan and tamarind (xyloglucan), no activity was detected on other glycans, including galactomannan, laminarin and starch. Also, Tm Cel74 did not contain a carbohydrate binding module (CBM), versions of which have been identified in the amino acid sequences of other family 74 enzymes. As such, a CBM associated with a chitinase in another hyperthermophile, Pyrococcus furiosus, was used to create a fusion protein that was active on crystalline cellulose; Tm Cel74 lacked activity on this substrate. Based on the cleavage pattern determined for Tm Cel74 on glucan-based substrates, this enzyme likely initiates recruitment of carbohydrate carbon and energy sources by creating oligosaccharides that are transported into the cell for further processing.

Cellulose-binding domains

Many researchers have acknowledged the fact that there exists an immense potential for the application of the cellulose-binding domains (CBDs) in the field of biotechnology. This becomes apparent when the phrase "cellulose-binding domain" is used as the key word for a computerized patent search; more then 150 hits are retrieved. Cellulose is an ideal matrix for large-scale affinity purification procedures. This chemically inert matrix has excellent physical properties as well as low affinity for nonspecific protein binding. It is available in a diverse range of forms and sizes, is pharmaceutically safe, and relatively inexpensive. Present studies into the application of CBDs in industry have established that they can be applied in the modification of physical and chemical properties of composite materials and the development of modified materials with improved properties. In agro-biotechnology, CBDs can be used to modify polysaccharide materials both in vivo and in vitro. The CBDs exert nonhydrolytic fiber disruption on cellulose-containing materials. The potential applications of "CBD technology" range from modulating the architecture of individual cells to the modification of an entire organism. Expressing these genes under specific promoters and using appropriate trafficking signals, can be used to alter the nutritional value and texture of agricultural crops and their final products.

Self-activating factor X derivative fused to the C-terminus of a cellulose-binding module: Production and properties

In this work, a new derivative of FX was engineered. It comprises a cellulose-binding module (CBM) fused to the N-terminus of the truncated light chain (E2FX) of FX and a hexahistidine tag (H6) fused to the C-terminus of the heavy chain. The sequence LTR at the site of cleavage of the activation peptide from the N-terminus of the heavy chain is changed to IEGR to render the derivative self-activating. However, N-linked glycans on the CBM of the derivative blocked its binding to cellulose and those on the activation peptide slowed its activation. Therefore, the sites of N-linked glycosylation on the CBM and on the activation peptide were eliminated by mutation. The final derivative can be produced in good yield by cultured mammalian cells. It is purified easily with Ni(2+)-agarose, it is self-activating, and it can be immobilized on cellulose. When immobilized on a column of cellulose beads, the activated derivative retains approximately 80% of its initial activity after 30 days of continuous hydrolysis of a fusion protein substrate. Under these conditions of operation, the effective substrate:enzyme ratio is >10(4).

Evidence for temporal regulation of the two Pseudomonas cellulosa xylanases belonging to glycoside hydrolase family 11

Pseudomonas cellulosa is a highly efficient xylan-degrading bacterium. Genes encoding five xylanases, and several accessory enzymes, which remove the various side chains that decorate the xylan backbone, have been isolated from the pseudomonad and characterized. The xylanase genes consist of xyn10A, xyn10B, xyn10C, xyn10D, and xyn11A, which encode Xyn10A, Xyn10B, Xyn10C, Xyn10D, and Xyn11A, respectively. In this study a sixth xylanase gene, xyn11B, was isolated which encodes a 357-residue modular enzyme, designated Xyn11B, comprising a glycoside hydrolase family 11 catalytic domain appended to a C-terminal X-14 module, a homologue of which binds to xylan. Localization studies showed that the two xylanases with glycoside hydrolase family (GH) 11 catalytic modules, Xyn11A and Xyn11B, are secreted into the culture medium, whereas Xyn10C is membrane bound. xyn10C, xyn10D, xyn11A, and xyn11B were all abundantly expressed when the bacterium was cultured on xylan or beta-glucan but not on medium containing mannan, whereas glucose repressed transcription of these genes. Although all of the xylanase genes were induced by the same polysaccharides, temporal regulation of xyn11A and xyn11B was apparent on xylan-containing media. Transcription of xyn11A occurred earlier than transcription of xyn11B, which is consistent with the predicted mode of action of the encoded enzymes. Xyn11A, but not Xyn11B, exhibits xylan esterase activity, and the removal of acetate side chains is required for xylanases to hydrolyze the xylan backbone. A transposon mutant of P. cellulosa in which xyn11A and xyn11B were inactive displayed greatly reduced extracellular but normal cell-associated xylanase activity, and its growth rate on medium containing xylan was indistinguishable from wild-type P. cellulosa. Based on the data presented here, we propose a model for xylan degradation by P. cellulosa in which the GH11 enzymes convert decorated xylans into substituted xylooligosaccharides, which are then hydrolyzed to their constituent sugars by the combined action of cell-associated GH10 xylanases and side chain-cleaving enzymes.

Modification of polysaccharides and plant cell wall by endo-1,4-beta-glucanase and cellulose-binding domains

Cellulose is one of the most abundant polymers in nature. Different living systems evolved simultaneously, using structurally similar proteins to synthesize and metabolize polysaccharides. In the growing plant, cell wall loosening, together with cellulose biosynthesis, enables turgor-driven cell expansion. It has been postulated that endo-1,4-beta-glucanases (EGases) play a central role in these complex activities. Similarly, microorganisms use a consortium of lytic enzymes to convert cellulose into soluble sugars. Most, if not all, cellulases have a modular structure with two or more separate independent functional domains. Binding to cellulose is mediated by a cellulose-binding domain (CBD), whereas the catalytic domain mediates hydrolysis. Today, EGases and CBDs are known to exist in a wide range of species and it is evident that both possess immense potential in modifying polysaccharide materials in-vivo and in-vitro. The hydrolytic function is utilized for polysaccharide degradation in microbial systems and cell wall biogenesis in plants. The CBDs exerts activity that can be utilized for effective degradation of crystalline cellulose, plant cell wall relaxation, expansion and cell wall biosynthesis. Applications range from modulating the architecture of individual cells to an entire organism. These genes, when expressed under specific promoters and appropriate trafficking signals can be used to alter the nutritional value and texture of agricultural crop and their final products. EGases and CBDs may also find applications in the modification of physical and chemical properties of composite materials to create new materials possessing improved properties.

Co-operative binding of triplicate carbohydrate-binding modules from a thermophilic xylanase

Family 6 carbohydrate-binding modules were amplified by polymerase chain reaction (PCR) from Clostridium stercorarium strain NCIB11754 genomic DNA as a triplet. Individually, these modules bound to xylooligosaccharides and cellooligosaccharides with affinities varying from approximately 3 x 10(3) M(-1) to approximately 1 x 10(5) M(-1). Tandem and triplet combinations of these modules bound co-operatively to soluble xylan and insoluble cellulose to give approximately 20- to approximately 40-fold increases in affinity relative to the individual modules. This co-operativity was an avidity effect resulting from the modules within the tandems and triplet interacting simultaneously with proximal binding sites on the polysaccharides. This occurred by both intrachain and interchain interactions. The duplication or triplication of modules appears to be linked to the growth temperature of the organism; co-operativity in these multiplets may compensate for the loss of affinity at higher temperatures.

Identification and glucan-binding properties of a new carbohydrate-binding module family

The C-terminal 191-residue module of Cel5A from the alkalophilic Bacillus sp. 1139 comprises a carbohydrate-binding module (CBM) belonging to a previously unidentified family that we have classified as CBM family 28. This example, called CBM28, bound specifically to cello-oligosaccharides and mixed beta-(1,3)(1,4)-glucans (barley beta-glucan) with association constants of approximately (1-4)x10(4) M(-1). Its binding to barley beta-glucan was remarkably insensitive to pH between 7.0 and 10.9, in keeping with its alkalophilic source. CBM28 bound to cellulose having a significant non-crystalline content with an association constant similar to that for its binding to soluble glucans. CBM17 (CBM family 17) and CBM28 modules naturally occur as tandems. The CBM17/CBM28 tandem from Cel5A bound with apparent co-operativity to barley beta-glucan. The association of CBM28 with cello-oligosaccharides was driven enthalpically and marked by the different thermodynamic contribution of three putative binding subsites that accommodate a cellohexaose molecule.

Structure of a family 15 carbohydrate-binding module in complex with xylopentaose. Evidence that xylan binds in an approximate 3-fold helical conformation

The recycling of photosynthetically fixed carbon by the action of microbial glycoside hydrolases is a key biological process. The consortium of degradative enzymes involved in this process frequently display catalytic modules appended to one or more noncatalytic carbohydrate-binding modules (CBMs). CBMs play a central role in the optimization of the catalytic activity of plant cell wall hydrolases through their binding to specific plant structural polysaccharides. Despite their pivotal role in the biodegradation of plant biomass, the mechanism by which these proteins recognize their target ligands is unclear. This report describes the structure of a xylan-binding CBM (CBM15) in complex with its ligand. This module, derived from Pseudomonas cellulosa xylanase Xyn10C, binds to both soluble xylan and xylooligosaccharides. The three-dimensional crystal structure of CBM15 bound to xylopentaose has been solved by x-ray crystallography to a resolution of 1.6 A. The protein displays a similar beta-jelly roll fold to that observed in many other families of binding-modules. A groove, 20-25 A in length, on the concave surface of one of the beta-sheets presents two tryptophan residues, the faces of which are orientated at approximately 240 degrees to one another. These form-stacking interactions with the n and n+2 sugars of xylopentaose complementing the approximate 3-fold helical structure of this ligand in the binding cleft of CBM15. In four of the five observed binding subsites, the 2' and 3' hydroxyls of the bound ligand are solvent-exposed, providing an explanation for the capacity of this xylan-binding CBM to accommodate the highly decorated xylans found in the plant cell wall.

Recognition of cello-oligosaccharides by a family 17 carbohydrate-binding module: an X-ray crystallographic, thermodynamic and mutagenic study

The crystal structure of the Clostridium cellulovorans carbohydrate-binding module (CBM) belonging to family 17 has been solved to 1.7 A resolution by multiple anomalous dispersion methods. CBM17 binds to non-crystalline cellulose and soluble beta-1,4-glucans, with a minimal binding requirement of cellotriose and optimal affinity for cellohexaose. The crystal structure of CBM17 complexed with cellotetraose solved at 2.0 A resolution revealed that binding occurs in a cleft on the surface of the molecule involving two tryptophan residues and several charged amino acids. Thermodynamic binding studies and alanine scanning mutagenesis in combination with the cellotetraose complex structure allowed the mapping of the CBM17 binding cleft. In contrast to the binding groove characteristic of family 4 CBMs, family 17 CBMs appear to have a very shallow binding cleft that may be more accessible to cellulose chains in non-crystalline cellulose than the deeper binding clefts of family 4 CBMs. The structural differences in these two modules may reflect non-overlapping binding niches on cellulose surfaces.