Dentin adhesion and MMPs: a comprehensive review

Effects of different antibacterial disinfectants on microleakage of bulk-fill composite bonded to different tooth structures

Background

This in-vitro study aimed to investigate the effect of two different antibacterial disinfectants on the microleakage performance of newly developed bulk-fill composite, bonded to different tooth structures.

Methods

Class V cavities were prepared in 30 sound premolar teeth, with enamel occlusal margins (OM) and dentin cervical margins (CM). Two disinfectants, 2% chlorhexidine gluconate (CHX) and Listerine Miswak (ListM), were used. Teeth were divided into three groups (n = 10): G1, Control; G2, CHX; and G3, ListM. Disinfectants were applied to the cavity preparation walls after they were etched with 35% phosphoric acid. The Single Bond Universal adhesive system was then used, and teeth were restored with Filtek One Bulk Fill composite. Samples were examined, after thermocycling aging, by stereomicroscopy for the evaluation of marginal dye penetration.

Results

The highest mean microleakage score was reported in the CM of G1 (2.60 ± 1.174), which was significant compared with that of G2 only (p = 0.02). OM in G1 showed no microleakage, with no significant differences found among groups (χ² = 1.39, p = 0.50). No significant differences were reported between G2 and G3 (p = 0.45 OM; p = 0.17 CM).

Conclusions

Cavity pretreatment with CHX is not significantly different to pretreatment with CHX. In contrast, CHX improved the cervical marginal seal as compare to the control group (G1).

The Bond Strength and Antibacterial Activity of the Universal Dentin Bonding System: A Systematic Review and Meta-Analysis

Streptococcus mutans (S. mutans) is a group of viridans mostly located in oral flora among the wide and biodiverse biofilm. It plays a significant role not only in caries formation but also triggering intracerebral haemorrhage. The durable and stable bond interface, besides bacteria elimination, is one of the crucial factors influencing the resin composite restoration performance. This study aimed to evaluate universal adhesives (UAs) with regard to in vitro bond strength to dentin, and the inhibition of the S. mutans growth and compare them with UAs modified with antimicrobial agents through a systematic review and meta-analysis. Two reviewers performed a literature search up to April 2021 in 5 electronic databases: PubMed MedLine, Scielo, ISI Web of Science, Scopus, and EMBASE. Only in vitro studies reporting the effect of modifying UAs with antimicrobial agents on the bond strength to dentin and/or on the inhibition of the S. mutans were included. Analyses were carried out using Review Manager Software version 5.3.5 (The Nordic Cochrane Centre, The Cochrane Collaboration, Copenhagen, Denmark). The methodological quality of each in vitro study was evaluated following the parameters of a previous systematic review. A total of 1716 potentially relevant publications were recognized. After reviewing the title and abstract, 16 studies remained in the systematic review. From these, a total of 3 studies were included in the meta-analysis. Since data from the studies included in the antimicrobial outcome included zero values, they could not be meta-analysed. Including 0 values in the analysis will lead to several biases in the analysis, so these data were discarded. The antibacterial effect against S. mutans of UAs modified with antimicrobial agents was higher than the non-modified adhesive systems. Within the limitations of the present study, the bond strength of UAs to dentin could be improved by using antimicrobial agents. The UAs modified with antibacterial agents showed a decrease in the viability of S. mutans biofilm, among the adhesives tested. However, there are not enough valid data on antibacterial properties of modified UAs; therefore, more well-designed research on these materials is needed.

Antibacterial and Bonding Properties of Universal Adhesive Dental Polymers Doped with Pyrogallol

This study investigated the antibacterial activity, bond strength to dentin (SBS), and ultra-morphology of the polymer-dentin interface of experimental adhesive systems doped with pyrogallol (PY), which is a ubiquitous phenolic moiety that is present in flavonoids and polyphenols. A universal adhesive containing 4-META and 10-MDP was used in this study. PY behaves as an antioxidant and anti-cancerogenic agent and it was incorporated into the adhesive at different concentrations (0.5 and 1 wt.%). The antibacterial activity and SBS were analyzed and the results were statistically analyzed. The ultra-morphology of the polymer-dentin interface was assessed using scanning electron microscopy (SEM). At 24 h, a lower antibacterial activity was observed for the control adhesive compared to those with 0.5% and 1% PY. No difference was seen in SBS between the three groups at 24 h. After 6 months, the SBS of the 0.5% PY adhesive was significantly lower than the other tested adhesives. The specimens created with 1% PY adhesive presented a higher bond strength at six months compared with that found at 24 h. No morphological differences were found at the polymer-dentin interfaces of the tested adhesives. Pyrogallol may be incorporated into modern universal adhesive systems to preserve the polymer-dentin bonding interface and confer a certain degree of antibacterial activity.

Evaluation of various methods of methylene blue removal from the post space after photodynamic therapy on the bonding interface using different resin cementation systems

BACKGROUND

To evaluate the effects of three protocols for removing 0.01 % methylene blue from the post space after photodynamic therapy on bond strength and tag formation in the dentin of the fiber post space, using a conventional cementation system with an etch-and-rinse or universal adhesive system.

METHODS

Sixty human canines were endodontically treated for fiber post cementation. The specimens were randomized into 6 groups (n = 10): G1, G2, G3, G4, G5, and G6. The G1, G2, and G3 groups were irrigated with saline solution, 2.5 % sodium hypochlorite (NaOCl), and 2.5 % NaOCl, agitated by passive ultrasonic irrigation (PUI), respectively. In these groups, a conventional cementation system with etch-and-rinse adhesive was used. The G4, G5, and G6 groups were irrigated with the respective solutions mentioned above and cemented using a conventional cementation system with universal adhesive. Tag formation in the dentin was evaluated by confocal laser scanning microscopy. The push-out bond strength test was performed on three thirds of the specimens.

RESULTS

In the cervical and middle thirds, the greatest extent of dentin tag formation occurred in the G1 (p = 0.023 and p = 0.033, respectively). In the apical third, G1, G2, and G3 demonstrated similar tag formation between themselves (p = 0.089). In the cervical and middle thirds, G4 demonstrated the highest bond strength when compared to the other groups (p < 0.05).

CONCLUSION

The protocols for removing 0.01 % methylene blue with NaOCl, irrespective of the involvement of passive ultrasonic irrigation, negatively effects the bond strength and tag formation in the dentin of the post space.

Bonding of an ion-releasing restorative material to caries-affected dentin disinfected with photodynamic therapy, Er,Cr:YSGG laser, and chemical disinfectants

AIM

The study aimed to evaluate the microtensile bond strength (μTBS) of giomer, an ion-releasing restorative material, to caries-affected dentin (CAD) when different cavity disinfectant protocols were applied before the restoration.

MATERIAL AND METHODS

Thirty extracted non-carious human third molars were embedded in acrylic resin. The occlusal portions of the samples were excised using an IsoMet saw. After creating artificial caries, samples were divided into six groups (n = 12): sound dentin with no disinfection (Group SD), CAD with no disinfection (Group CAD), CAD disinfected with 2% chlorhexidine gluconate (Group CHX), CAD disinfected with 6% NaOCl (Group NaOCl), CAD disinfected with photodynamic therapy with methylene blue photosensitizer (Group PDT), and CAD disinfected with Er,Cr:YSGG (Group ECYL). Following disinfection protocols, the universal adhesive was applied, and all samples were restored using giomer. Subsequently, μTBS analyses were performed, and data were analyzed statistically.

RESULTS

The highest μTBS values were obtained from the SD and CAD groups, which exhibited no statistical differences (p > 0.05). The PDT and ECYL groups had higher μTBS values compared with the CHX and NaOCl groups (p < 0.05), and all disinfection protocols decreased the bond strength to CAD (p < 0.05).

CONCLUSION

The microtensile bond strength of disinfected CAD was greater with Er,Cr:YSGG laser and photodynamic therapy treatment than with chemical disinfectants. Giomer may enhance the bond strength to CAD, which has a weaker bonding potential than sound dentin due to structural differences. However, disinfection protocols adversely affect adhesion between the restorative material and CAD.

Effects of Various Antioxidant Pretreatment Modalities on Adhesion to Sound and Caries-Affected Dentin: An In Vitro Study

Aim:

Natural antioxidants were offered as the answer of dentin adhesion issue. The aim of this study is to investigate the effects of proanthocyanidin and lycopene as pretreatment agents on the sound and caries-affected dentin surface on microtensile bond strength and microleakage.

Materials and Methods:

This study was designed as in vitro because of that 84 mandibular molar teeth were collected. Forty-two of the included teeth were carious teeth, while the other 42 were without caries. Sixty of them were used for microleakage and 24 for microtensile bond strength testing and scanning electron microscopy analysis. The samples were divided into six subgroups randomly according to dentin pretreatments: 5% proanthocyanidin, 5% lycopene, and no antioxidant application. After the restorative procedures, samples were attached to the microtensile tester. Samples were subjected to tensile stress in the load cell until they broke at a speed of 0.5 mm per min. Microtensile bond strength (µTBS) and microleakage test data were analyzed with two-way analysis of variance, Bonferroni correction, and Tamhane’s T2 tests.

Results:

Two-way variance analysis showed that dentin pretreatment applications, dentin substrate, and the interaction between these two parameters had statistically significant effects on µTBS values ( P < .001). There was no difference between dentin pretreatment applications in terms of microleakage scores ( P > .05).

Conclusion:

The application of dentin pretreatment with proanthocyanidin is a successful procedure that increases the bond strength in both dentin substrate, while pretreatment with lycopene in caries-affected dentin reduces it.

Effect of Over-Etching and Prolonged Application Time of a Universal Adhesive on Dentin Bond Strength

This study investigated the effect of over-etching and prolonged application time of a universal adhesive on dentin bond strength. Ninety extracted human molars were ground to dentin and randomly allocated into nine groups (G1-9; n = 10 per group), according to the following acid etching and adhesive application times. In the control group (G1), phosphoric acid etching was performed for 15 s followed by application of the universal adhesive Scotchbond Universal (3M) for 20 s, as per manufacturer's instructions. In groups G2-5, both the etching and adhesive application times were either halved, doubled, quadrupled, or increased eightfold. In groups G6-9, etching times remained the same as in G2-5 (7.5 s, 30 s, 60 s, and 120 s, respectively), but the adhesive application time was set at 20 s as in the control group (G1). Specimens were then restored with a nanofilled composite material and subjected to microtensile bond strength testing. Bond strength data were statistically analyzed by ANOVA and Tukey's post-hoc tests (α = 0.05). The relationship of bond strength with etching and adhesive application time was examined using linear regression analysis. Treatment of dentin with halved phosphoric acid etching and adhesive application times (G2) resulted in a significant bond strength decrease compared to the control group (G1) and all other test groups, including the group with halved acid etching, but 20 s of adhesive application time (G6). No significant differences in bond strength were found for groups with multiplied etching times and an adhesive application time of 20 s or more, when compared to the control group (G1). In conclusion, a universal adhesive application time of at least 20 s is recommended when bonding to over-etched dentin.

Adhesive dentistry: Current concepts and clinical considerations

OBJECTIVES

To address contemporary concepts in adhesive dental materials with emphasis on the evidence behind their clinical use.

OVERVIEW

Adhesive dentistry has undergone major transformations within the last 20 years. New dental adhesives and composite resins have been launched with special focus on their user-friendliness by reducing the number of components and/or clinical steps. The latest examples are universal adhesives and universal composite resins. While clinicians prefer multipurpose materials with shorter application times, the simplification of clinical procedures does not always result in the best clinical outcomes. This review summarizes the current evidence on adhesive restorative materials with focus on universal adhesives and universal composite resins.

CONCLUSIONS

(a) Although the clinical behavior of universal adhesives has exceeded expectations, dentists still need to etch enamel to achieve durable restorations; (b) there is no clinical evidence to back some of the popular adjunct techniques used with dental adhesives, including glutaraldehyde-based desensitizers and matrix metalloproteinase inhibitors; and (c) the color adaptation potential of new universal composite resins has simplified their clinical application by combining multiple shades without using different translucencies of the same shade.

CLINICAL SIGNIFICANCE

New adhesive restorative materials are easier to use than their predecessors, while providing excellent clinical outcomes without compromising the esthetic quality of the restorations.

Effects of Zn-Doped Mesoporous Bioactive Glass Nanoparticles in Etch-and-Rinse Adhesive on the Microtensile Bond Strength

The purpose of this study was to assess the effects in the dentin bond strength of dental adhesives (DAs) and biological effects using zinc (Zn)-doped mesoporous bioactive glass nanoparticles (MBN-Zn). Synthesized MBN and MBN-Zn were characterized by scanning electron microscopy (SEM), X-ray diffraction and the Brunauer, Emmett and Teller (BET) method. The matrix metalloproteinases (MMP) inhibition effects of DA-MBN and DA-MBN-Zn were analyzed. The microtensile bond strength (MTBS) test was conducted before and after thermocycling to investigate the effects of MBN and MBN-Zn on the MTBS of DAs. The biological properties of DA-MBN and DA-MBN-Zn were analyzed with human dental pulp stem cells (hDPSCs). Compared with the DA, only the DA-1.0% MBN and DA-1.0% MBN-Zn exhibited a statistically significant decrease in MMP activity. The MTBS values after thermocycling were significantly increased in DA-1.0% MBN and DA-1.0% MBN-Zn compared with the DA (p < 0.05). It was confirmed via the MTT assay that there was no cytotoxicity for hDPSCs at 50% extract. In addition, significant increases in the alkaline phosphatase activity and Alizarin Red S staining were observed only in DA-1.0%MBN-Zn. These data suggest the 1.0% MBN and 1.0% MBN-Zn enhance the remineralization capability of DAs and stabilize the long-term MTBS of DAs by inhibiting MMPs.

Current perspectives on dental adhesion: (1) Dentin adhesion - not there yet

The essential goal of any adhesive restoration is to achieve a tight and long-lasting adaptation of the restorative material to enamel and dentin. The key challenge for new dental adhesives is to be simultaneously effective on two dental substrates of conflicting nature. Some barriers must be overcome to accomplish this objective. While bonding to enamel by micromechanical interlocking of resin tags within the array of microporosities in acid-etched enamel can be reliably achieved and can effectively seal the restoration margins against leakage, bonding effectively and durably to organic and humid dentin is the most puzzling task in adhesive dentistry.

Much of the research and development of dental adhesives has focused on making the clinical procedure more user-friendly by reducing the number of bottles and/or steps. Although clinicians certainly prefer less complicated and more versatile adhesive materials, there is a trade-off between simplification of dental adhesives and clinical outcomes. Likewise, new materials are launched with claims of being novel and having special properties without much supporting evidence.

This review article discusses dental adhesion acknowledging pioneer work in the field, highlights the substrate as a major challenge to obtain durable adhesive restorations, as well as analyzes the three adhesion strategies and their shortcomings. It also reviews the potential of chemical/ionic dental adhesion, discusses the issue of extensively published laboratory research that does not translate to clinical relevance, and leaves a few thoughts in regard to recent research that may have implications for future adhesive materials.

Catechin-based Dentin Pretreatment and the Clinical Performance of a Universal Adhesive: A Two-year Randomized Clinical Trial

CLINICAL RELEVANCE

At 24 months, the dentin pretreatment with epigallocatechin-3-gallate did not impair the clinical performance of the adhesive Single Bond Universal regardless of the bonding strategy used.

SUMMARY

Purpose: To evaluate the two-year effect of dentin pretreatment with epigallocatechin-3-gallate (EGCG) on the clinical performance of restorations of noncarious cervical lesions (NCCLs) with Single Bond Universal, applied in two different modes (self-etch and etch-and-rinse).Methods and Materials: In this randomized clinical trial, 33 volunteers were selected, and 156 NCCLs were assigned to four groups: ER, etch-and-rinse; ER-EGCG, 0.1% EGCG dentin pretreatment + etch-and-rinse; SE, self-etch; and SE-EGCG, 0.1% EGCG dentin pretreatment + self-etch. The NCCLs were restored with a nanofilled resin composite and evaluated at baseline and at six, 12, 18, and 24 months using FDI criteria for retention, marginal staining, marginal adaptation, caries, and postoperative sensitivity. Two evaluators were blinded to the treatments performed, and impressions were taken for resin replicas to allow indirect observations. Statistical analyses were performed with Kruskal-Wallis and McNemar tests with a significance level of 5%.Results: Six restorations (one from ER, two from SE, one from ER-EGCG, and two from SEEGCG) were lost at 24 months with no significant differences (p>0.05). The retention rates were 97.0% (ER and ER-EGCG), 94.1% (SE), and 94.2% (SE-EGCG). For marginal adaptation, a significant difference was detected between the baseline and 24 months for the SE group (p=0.0313). There were no statistical differences among all other evaluated criteria at 24 months, neither for each group at baseline nor for 24-month comparisons (p>0.05).Conclusions: The pretreatment with EGCG provided no benefit in the clinical performance of the adhesive regardless of the bonding strategy used. In addition, it adds an additional required step to the restorative procedure.

Is Conventional Resin Cement Adhesive Performance to Dentin Better Than Self-adhesive? A Systematic Review and Meta-Analysis of Laboratory Studies

CLINICAL RELEVANCE

Conventional multistep resin cements presented higher adhesive performance to dentin than simplified self-adhesive cements, which is an important criterion for indirect restoration prognosis.

SUMMARY

This study aimed to conduct a systematic review of the literature on laboratory studies assessing bonding performance to dentin of conventional and self-adhesive resin cements, in cementing indirect restorations. This review was reported according to the PRISMA Statement. Of a total of 518 studies, 36 were screened full text and reviewed according to exclusion criteria. Nineteen papers were included in the systematic review and meta-analyses, according to the following inclusion criteria: studies that evaluated the bond strength to dentin of indirect restorations cemented with dual conventional or self-adhesive resin cements and those that presented bond strength data in MPa as an outcome. Statistical analyses were conducted using Rev-Man 5.1. Comparisons were performed with random effects models at 5% significance level. A global analysis comparing conventional and self-adhesive cements and three subgroup analyses comparing immediate and long-term results were performed. Global analysis showed a difference between groups, with conventional resin cements presenting higher bond strength results than self-adhesive resin cements, in immediate and long-term time periods (both p=0.03). Immediate and longterm bond strength results were different for self-adhesive cements, favoring immediate bond strength (p=0.03), but immediate and long-term bond strength results for conventional resin cements were not different (p=0.06). Medium or high risk of bias was found in all studies. Conventional multistep resin cements showed superior overall adhesive performance compared with simplified self-adhesive resin cements when used to cement indirect restorations to dentin.

Zinc-Calcium-Fluoride Bioglass-Based Innovative Multifunctional Dental Adhesive with Thick Adhesive Resin Film Thickness

Apart from producing high bond strength to tooth enamel and dentin, a dental adhesive with biotherapeutic potential is clinically desirable, aiming to further improve tooth restoration longevity. In this laboratory study, an experimental two-step universal adhesive, referred to as Exp_2UA, applicable in both the etch-and-rinse (E&R) and self-etch (SE) modes and combining a primer, containing 10-methacryloyloxydecyldihydrogen phosphate as a functional monomer with chemical binding potential to hydroxyapatite, with a bioglass-containing hydrophobic adhesive resin, was multifactorially investigated. In addition to primary property assessment, including measurement of bond strength, water sorption, solubility, and polymerization efficiency, the resultant adhesive-dentin interface was characterized by transmission electron microscopy (TEM), the filler composition was analyzed by energy-dispersive X-ray spectroscopy, and the bioactive potential of the adhesive was estimated by measuring the long-term ion release and assessing its antienzymatic and antibacterial potential. Four representative commercial adhesives were used as reference/controls. Application in both the E&R and SE modes resulted in a durable bonding performance to dentin, as evidenced by favorable 1 year aged bond strength data and a tight interfacial ultrastructure that, as examined by TEM, remained ultramorphologically unaltered upon 1 year of water storage aging. TEM revealed a 20 μm thick hydrophobic adhesive layer with a homogeneous bioglass filler distribution. Adequate polymerization conversion resulted in extremely low water sorption and solubility. In situ zymography revealed reduced endogenous proteolytic activity, while Streptococcus mutans biofilm formation was inhibited. In conclusion, the three-/two-step E&R/SE Exp_2UA combines the high bonding potential and bond degradation resistance with long-term ion release, rendering the adhesive antienzymatic and antibacterial potential.

Effect of Chlorhexidine on durability of two self-etch adhesive systems

Background

Despite of the rapid development in the field of dental adhesives, the issue of reduction in dentin bond durability has still not been resolved. The activity of dentinal endogenous enzymes such as MMPs is one of the most important causes of failure in resin composite restorations. The aim of this study was to investigate the influence of Chlorhexidine on micro-tensile bond strength of two types of commercially available self-etch adhesives.

Material and Methods

Twenty four sound and freshly extracted molars were selected. Four standardized flat mid-coronal dentinal disks were prepared from each tooth. The specimens were randomly assigned to 6 groups (n=16). Groups A(control group) and B were treated with Clearfill SE Bond based on the manufacturer’s instructions. Groups C and D were treated with 2% Chlorhexidine 60 seconds before applying Clearfill SE Bond. Groups E and F were treated with Peak Universal Bond according to the manufacturer’s instructions. All groups were stored in distilled water in room temperature. Microtensile bond strength in groups A, C, and E were tested 24 hours after preparation, while microtensile bond strength in groups B, D, and F were tested after 3 months storage and 3000 thermal cycles(5-55 °C). Statistical analysis was performed with SPSS 20 and µTBS test results were analyzed using the Two-way ANOVA test.

Results

µTBS was not significantly different between groups A, C, and E after 24 hours (P>0.5). There was no significant difference between groups B (Clearfill SE Bond + Aging) and D (Clearfill SE Bond + 2% CHX + Aging). The Peak Universal µTBS significantly decreased after the aging procedure (P<0.001).

Conclusions

Based on the findings of this study, pretreatment with 2% CHX had no negative effect on the Clearfill SE Bond µTBS. However the µTBS of 0.2% CHX contained Peak Universal adhesive decreased significantly after aging.

Key words:Self-etch adhesives, Micro-tensile bond strength, chlorhexidine, bond durability.

Effect of tea root-derived proanthocyanidin fractions on protection of dentin collagen

Objectives

Proanthocyanidins (PAs) have been widely used as effective agents for dentin collagen cross-linking to enhance the biomechanics and biostability of dentin in vitro. However, the effects and protective mechanisms of various tea root-derived PA components on dentin remain undefined. This study evaluated the effects of these tea root-derived PA components on dentin biomechanics and biostability.

Methods

In this study, ethyl acetate and n-butyl alcohol were used to extract PAs with different degrees of polymerization from tea roots; the effects of these PA extracts on dentin were evaluated.

Results

Dentin was treated with glutaraldehyde, ethyl acetate, n-butyl alcohol, or water. PAs with a high degree of polymerization, extracted using n-butyl alcohol, were able to more effectively improve dentin collagen cross-linking, increase resistance to bacterial collagenase digestion, and enhance dentin elasticity, relative to treatment with glutaraldehyde or PAs with a low degree of polymerization (extracted using ethyl acetate). Additionally, treatment with aqueous extract of tea roots was detrimental to dentin stability and function.

Conclusions

PAs with a high degree of polymerization were effective for dentin protection and restoration in vitro, suggesting clinical treatment potential for tea root-derived PAs.

Effect of 2% Chlorhexidine Following Acid Etching on Microtensile Bond Strength of Resin Restorations: A Meta-Analysis

Background and Objectives: The aim of this systematic review was to examine the effect of 2% chlorhexidine following acid etching on the microtensile bond strength of resin restorations for different follow-up times. Materials and Methods: A thorough search of PubMed, Scopus, and Embase databases were conducted. In vitro experimental studies or in vivo studies published up to December 2018 with an experimental group treated with a 2% chlorhexidine solution following acid etching and a control group were included, wherein the final restoration used a resin composite in both the groups. Results: Twenty-one articles were identified for qualitative analysis and 18 for meta-analysis. The difference in the means of microtensile bond strength between the two groups was calculated for the different follow-up times. The differences were significant for 6 months (4.30 MPa; 95% CI 2.72–5.89), 12 months (8.41 MPa; 95% CI 4.93–11.88), and 2–5 years including aged and thermocycling samples (9.08 MPa; 95% CI 5.36–12.81). There were no significant differences for the type of adhesive used. A meta-regression model showed a significant effect of time on the microtensile bond strength. Conclusions: The application of a 2% chlorhexidine solution after acid etching increased the microtensile bond strength significantly for follow-up times of 6 months or more. The adhesive type had no influence.

Effect of grape seed extract-containing phosphoric acid formulations on bonding to enamel and dentin

The aim was to evaluate the effect of 2% grape seed extract (GSE) containing phosphoric acid (PhA) on the bond strength to enamel and dentin. The control group was 37% PhA. The following three PhA formulations with 2% GSE and 20% ethanol were obtained: GSE5 = 5% PhA; GSE10 = 10% PhA; and GSE20 = 20% PhA. The enamel and dentin surfaces of molars were etched with the acid solutions, followed by Scotchbond Multi-Purpose adhesive and composite resin application. The tensile bond strength (TBS) test evaluated the bond to enamel after 24 h, and the microtensile bond strength (μTBS) test evaluated the bond to dentin after 24 h and 12-month water storage. Etched enamel and dentin were observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. The TBS data were submitted to one-way ANOVA, while µTBS data were submitted to two-way ANOVA and Tukey's test (α = 0.05). The TBS (MPa) to enamel did not significantly differ among the control (48.1 ± 15.7), GSE5 (46.1 ± 9.6), GSE10 (49.8 ± 13.6) and GSE20 (44.1 ± 11.9) groups (p = 0.537). The µTBS (MPa) to dentin of the control (28.4 ± 14.4) and GSE20 (24.1 ± 8.1) groups were significantly higher than those of the GSE5 (16.8 ± 7.4) and GSE10 (17.5 ± 6.6) groups at 24 h (p < 0.006). After 12-month storage, only GSE5 (21.0 ± 7.8) and GSE10 (17.6 ± 8.0) did not show significantly decreased μTBS (p > 0.145). SEM micrographs showed a shallower enamel etching pattern for GSE5. AFM images showed the formation of collagenous globular structures for GSE5 and GSE10. The different acid solutions did not influence the TBS to enamel, and the µTBS to dentin was stable over time when dentin was etched with GSE5 and GSE10.

Effect of Dentin Pretreatment with Arginine on Microshear Bond Strength of Etch-and-Rinse or Self-Etch Adhesive Systems

Objective The main purpose of this study was to evaluate the effect of dentin pretreatment with 8% arginine on the immediate and 6-month bond strength (BS) of adhesive systems and surface morphology of dentin.

Materials and Methods Dentin bovine specimens (5 × 5 mm) were allocated into following pretreatments: without pretreatment (conventional technique, C) or exposure to arginine solution (A) for 5 minutes prior to tooth restoration. The adhesive procedure was performed using ( n = 12): 3-step etch-and-rinse adhesive (Scotchbond Multipurpose—SBMP [C+SBMP and A+SBMP]); 2-step etch-and-rinse adhesive (Single Bond 2 - SB [C+SB and A+SB]); or 2-step self-etch adhesive (Clearfil SE Bond - CSEB [C+CSEB and A+CSEB]). After 24 hours, the composite resin restorations were evaluated immediately and after 6 months of water storage using a microshear test and fracture pattern. The dentin surface exposed to A was assessed by scanning electron microscopy (SEM). The immediate BS data were submitted to a two-way analysis of variance and Tukey's test, and the long-term BS results were analyzed using Kruskal–Wallis and Dunn tests (α = 0.05).

Results There was a significant decrease in immediate and 6-month BS for the A+SB and A+CSEB groups, which differed statistically from the C group. The fracture pattern was predominantly adhesive for SB and CSEB adhesive for C and A. The SEM images presented a different conditioning pattern of the dentin exposed to A.

Conclusion The dentin pretreatment with arginine interfered negatively in the immediate and long-term BS of the simplified adhesive system. However, the SBMP adhesive was not affected by arginine pretreatment presenting the most satisfactory results.

Effect of sodium ascorbate on bond strength and metalloproteinases activity in bleached dentin

Aim

This study evaluated the effect of sodium ascorbate (SA) on the proteolytic activity of matrix metalloproteinases (MMPs) and investigated the related effects on the bond strength of bleached dentin.

Materials and methods

Eighty freshly extracted human third molars were randomly divided according to treatment (bleaching or SA application), type of analysis (microshear or measuring MMP activity), and post-bleaching time to assess bond strength (24 hrs or 30 days). Data from both analyses were subjected to one-way analysis of variance to detect differences among groups, followed by Tukey’s multiple comparison test (p≤0.05).

Results

Dental bleaching significantly reduced bond strength values when the adhesive strategy was performed after 24 hrs (despite the SA treatment) or 30 days after the bleaching procedure. However, after 30 days, the bond strength values of the groups who received bleaching or SA application were similar to those of the unbleached group. Dental bleaching caused the activation of MMPs, and SA did not influence this activity.

Conclusion

It was concluded that SA does not affect the activity of MMPs or the bond strength in bleached dentin immediately after the bleaching treatment.

Adhesive Systems Used in Indirect Restorations Cementation: Review of the Literature

New technologies are changing the therapeutical options to do indirect restorations and new adhesive systems are continuously introduced to be used by clinicians. Different interactions between restorations, adhesive systems components, enamel and dentin require having criteria based on the selection of the adhesive system, ensuring the longevity of the restorations and the preservation of the biological remnant. The adhesion force to the dental tissue is one of the indicatives of the behavior of the adhesive systems and influences the behavior of the treatments with direct and indirect restorations. The objective of this search was to find the adhesive systems with the best results in terms of the adhesion strength of indirect restorations on the dental tissues. The search was conducted in two MEDLINE digital databases (PubMed), and the Cochrane Library with a search strategy based on the combination of MeSH (Medical Subject Headings) keywords. This systematic review used the PRISMA guide (Preferred Reporting Items for Systematic Reviews and Meta-Analysis). According to this review, the 3-step adhesive systems were the best performing and still are the gold standard for the cementing of indirect restorations. In addition, it can be concluded that self-etched adhesive systems reduce the time spent in clinical practice, however at the interface level they behave as permeable membranes more susceptible to degradation.

Effect of fiber post space irrigation with different peracetic acid formulations on the bond strength and penetration into the dentinal tubules of self-etching resin cement

STATEMENT OF PROBLEM

The post space must be irrigated with solutions that do not interfere with the bond strength and enhance penetration into the dentinal tubules of self-etching resin cement. Which solution is best is unclear. Peracetic acid with different formulations appears to be a good option.

PURPOSE

The purpose of this in vitro study was to evaluate the effect of irrigating the fiber post space by using 1% peracetic acid (PA) at low (LH) or high (HH) hydrogen peroxide concentration on the bond strength and penetration into the dentinal tubules of RelyX U200 self-etching resin cement.

MATERIAL AND METHODS

After intraroot preparation for fiber posts in 60 endodontically treated teeth, the specimens were divided into 4 groups (n=15) according to the irrigation protocol: CG (control), distilled water; NA (NaOCl), 2.5% sodium hypochlorite; LHPA, PA with a low concentration of hydrogen peroxide; and HHPA, PA with a high concentration of hydrogen peroxide. The fiber posts were then cemented with self-etching resin cement labeled with rhodamine. Cross sections of the thirds were obtained by confocal scanning microscopy and submitted to the push-out and cement penetration tests. The data obtained in the push-out tests were evaluated by using ANOVA and the Tukey post hoc test, and those data obtained in the confocal screening were evaluated by using the Kruskal-Wallis and Dunn (Bonferroni correction) tests (α=.05).

RESULTS

Bond strength values in the cervical third of the CG were higher than those in NA (P=.035) but similar to those of the other groups (P=.05). In the other thirds, CG and LHPA values were similar to one another (P=.05) but higher than those of NA and HHPA (P<.001). The penetration rate assessed by confocal scanning microscopy revealed similar results in the cervical third for all groups (P=.075), except for NA which provided the lowest penetration. In the remaining thirds, CG and LHPA provided the highest penetration rate (P=.015).

CONCLUSIONS

The LHPA group had no negative effects on the bond strength and penetration into the dentinal tubules of the self-etching resin cement.

Effect of Polymeric Microparticles Loaded With Catechin on the Physicochemical Properties of an Adhesive System

The objective of this study was to synthesize and characterize epigallocatechin-3-gallate (EGCG)-loaded/poly(D-L lactide-co-glycolide) acid (PLGA) microparticles, evaluate their effects on degree of conversion and release assay of adhesives, and subsequently to examine the resin-dentin bond strength of two EGCG formulations (free EGCG or loaded into PLGA microparticles) applied as a pretreatment or incorporated into an adhesive system. The formulations were prepared according to a PLGA:EGCG ratio of 16:1 using the spray-drying technique. The size and polydispersity index were determined by light scattering in aqueous dispersion. The degree of conversion (%DC) and release assay were assessed by Fourier transform infrared spectroscopy and ultraviolet-visible spectrophotometer, respectively. Subsequently, 45 third molars were divided into five groups (n=9) according to the different EGCG application modes and prepared for bond strength testing in a universal testing machine. Results demonstrated no statistically significant difference among the DC means after the PLGA microparticles were loaded with EGCG. For the release assay, the 1.0% PLGA/EGCG group presented better results after being elected for use in the bond strength test. The resin-dentin bond strengths of the experimental groups after 12 months of water storage were significantly higher than in the control group. EGCG could improve the durability of the resin-dentin bond over time and promote a new era for adhesive dentistry with the concept of controlled release.

Effect of epigallocatechin-3- gallate solutions on bond durability at the adhesive interface in caries-affected dentin

Hydrolytic and enzymatic degradation by matrix metalloproteinases (MMPs) reduces the durability of composite resin restorations on caries-affected dentin (CAD). The use of MMP inhibitors such as epigallocatechin-3-gallate (EGCG) could increase the longevity of the bond to dentin. This study aimed to evaluate the use of EGCG at different aqueous concentrations on the resin-dentin microtensile bond strength (μTBS), fracture pattern and nanoleakage (NL) in immediate (IM) time interval and after 12-months of water storage (1Y) when using a two-step etch-and-rinse adhesive system on CAD. Dentin surfaces of 40 human molars were submitted to a microbiological caries induction protocol and randomized into 5 groups (n = 8) (0.02% EGCG; 0.2% EGCG; 0.5% EGCG; 2% Chlorhexidine [CHX] and no treatment as Control Group - [NT]). After acid etching, the solutions were applied for 60 s followed by application of dental adhesive (Adper Single Bond 2, 3 M ESPE) to CAD surfaces. Subsequently, a resin composite (4 mm) block was built on the dentin. After 24 h, the teeth were sectioned into beam-shaped specimens (cross-sectional area of 1 mm² and 8-mm high). Half of the specimens were tested in IM and the other half after 1Y. Two samples per tooth were submitted to SEM for NL evaluation. Data were statistically analyzed by two-way ANOVA and Tukey tests (α = 0.05). The results showed that use of EGCG and CHX did not affect μTBS in IM (p > 0.05). After 1Y, there was a reduction in μTBS for all experimental groups (p < 0.05). Adhesive fractures predominated in IM in all groups, except for 0.05% EGCG and NT. After 1Y, there was an increase in these adhesive fractures in all groups. For NL, all agents applied reduced NL in comparison with CT (p < 0.001). CHX showed lower NL (p < 0.001), followed by 0.02% and 0.5% EGCG. NT showed highest NL for both time intervals (p < 0.001). Thus, although the use of EGCG at different concentrations and CHX reduced the NL, they were unable to reduce degradation of μTBS to CAD over time.

Two-year clinical evaluation of proanthocyanidins added to a two-step etch-and-rinse adhesive

OBJECTIVE

To compare the clinical behavior of Proanthocyanidins (PA)-free and PA-containing two-step etch-and-rinse adhesive used underneath resin composite restorations in non-carious cervical lesions (NCCLs) over a 6- (6 M) and 24-month (24 M) period.

METHODS

135 restorations were randomly placed in 45 subjects. The NCCLs were conditioned (37% phosphoric acid for 15 s) and distributed into 3 groups: Control (EX0) - ExciTE F (Ivoclar Vivadent) adhesive applied following the manufacturer's recommendations; EX2 and EX5 - 2 wt% and 5 wt% of PA were added to ExciTE F, respectively, and applied as in EX0. Resin composite was placed incrementally and light-cured. The restorations were evaluated at baseline, 6 M and 24 M, using FDI and USPHS criteria. Statistical analyses were performed using Friedman and Wilcoxon tests (α = 0.05).

RESULTS

The retention rates were 98% (95% confidence interval 88-99%) for EX0, 92% (80-97%) for EX2; and 85% (72-93%) for EX5 at 6 M. A significant difference was found only for EX5 at 6 M when compared with the respective baseline findings (p = 0.03) and when compared with EX0 and EX2 (p = 0.001) at 6 M. After 24 M, the retention rates were 98% (88-99%) for EX0, 73% (59-84%) for EX2, and 71% (56-82%) for EX5. Only EX0 did not result in significant difference in retention rate at 24 M when compared with baseline but showed a significant higher retention rate when compared with those of EX2 and EX5 (p = 0.001).

CONCLUSION

Adding proanthocyanidins to the adhesive solution jeopardized the retention of composite resins restorations in non-carious cervical lesions after 24 months.

CLINICAL RELEVANCE

In spite of being user-friendlier than when used separately, the incorporation of proanthocyanidins into the adhesive solution impairs the longevity of composite restorations.

Clinical, double blind, randomized controlled trial of experimental adhesive protocols in caries-affected dentin

OBJECTIVE

To evaluate the clinical performance of posterior resin composite restorations regarding experimental and regular adhesive protocols in caries affected-dentin (CAD).

MATERIAL AND METHODS

A total of 92 class I and class II cavities with carious lesions were selected and randomly assigned to the following groups: (1) bioactive glass-ceramic powder/two-step etch and rinse system, (2) control/two-step etch and rinse system, (3) bioactive glass-ceramic powder/two-step self-etching system, and (4) control/two-step self-etching system. Two operators carried out the adhesive protocols and restored the cavities with a nano-hybrid resin composite. Participants were followed up at 1 week and 6, 12, and 18 months for clinical evaluation performed by two blinded examiners and calibrated according to FDI criteria. Data were analyzed using Kruskal-Wallis and Dunn tests with a confidence of 95%.

RESULTS

The clinical performance of resin composite restoration was not affected by the experimental use of an adhesive protocol including a bioactive glass-ceramic powder for 18 months post-procedure. However, there was a significant difference between group 2 and group 4 (p < 0.05) for marginal adaptation (18 months). Group 2 was significantly different from group 3 (p < 0.05) for fracture of material/retention (18 months) and marginal adaptation (1 week); group 2 showed a better performance.

CONCLUSION

Adhesive protocols can alter the clinical performance of posterior restorations in terms of marginal adaptation and the fracture of material/retention in CAD.

CLINICAL SIGNIFICANCE

Adhesive protocols may influence the success of resin composite restorations in CAD; this is important because failure can lead to caries, re-incidence, and/or clinical re-work.

Biomimetic Mineralizing Agents Recover the Micro Tensile Bond Strength of Demineralized Dentin

Biomimetic remineralization is an approach that mimics natural biomineralization, and improves adhesive procedures. The aim of this paper was to investigate the influence of Dentin Caries-like Lesions (DCLL)-Producing Model on microtensile bond strength (μTBS) of etch and rinse adhesive systems and investigate the effect of remineralizing agents such as Sodium Fluoride (NaF), MI Paste™ (MP) and Curodont™ Repair (CR) on caries-affected dentin (n = 6). Nine groups were established: (1) Sound dentin; (2) Demineralized dentin/Chemical DCLL: (3) Demineralized dentin/Biological DCLL; (4) Chemical/DCLL + NaF; (5) Chemical/DCLL + MP; (6) Chemical/DCLL + CR; (7) Biological/DCLL + NaF; (8) Biological/DCLL + MP; (9) Biological/DCLL + CR. Then all dentin blocks were subjected to a bonding procedure with Adper™ Single Bond 2 adhesive system/Filtek Z350XT 4 mm high block, following this they were immersed in deionized water/24 h and then sectioned with ≅1 mm² beams. The μTBS test was conducted at 1 mm/min/500 N loading. Failure sites were evaluated by SEM (scanning electron microscopy (150×). μTBS data were submitted to factorial ANOVA and Tukey’s test (p < 0.05). The highest values were found when demineralized dentin was treated with MP and CR, regardless caries lesion depth (p < 0.05). There was a predominance of adhesive/mixed in the present study. It was concluded that the use of the artificial dentin caries production models produces differences in the μTBS. Additionally MP and CR remineralizing agents could enhance adhesive procedures even at different models of caries lesion.

Effects of caffeic acid phenethyl ester application on dentin MMP-2, stability of bond strength and failure mode of total-etch and self-etch adhesive systems

OBJECTIVE

Investigate the long-term effect of dentin pretreatment with 0.05 or 0.1% caffeic acid phenethyl ester (CAPE) on (1) bond strength of resin composite to dentin by a three-step etch-and-rinse (Adper Scotchbond Multipurpose/ ASB) or a two-step self-etch adhesive system (Clearfil SE Bond/ CSE), (2) their fracture mode, (3) the micromorphological features of the hybrid layer formed; and (4) the level of MMP-2 in dentin (after application, using a correlative immunoexpression/quantification approach).

DESIGN

Composite resin blocks were fabricated on 48 third molars (n = 6), according to the type of adhesive and treatment (control, CAPE 0.05% and CAPE 0.1%). Slices were obtained for scanning electron microscopy (SEM) evaluation, and sticks were fabricated for microtensile tests (24 h and 1 year). Aliquots of dentin powder were distributed (n = 12) according to the treatment and the MMP-2 concentration was determined by ELISA.

RESULTS

Tukey test showed that ASB groups presented higher BS in 24 h than CSE groups. ASB presented a reduction in BS values after 1-year. ASB and CSE presented no significant differences in BS after 1-year. CAPE had no effect on BS for both adhesive systems. The predominant failure mode for the ASB groups were adhesive; when 0.1% CAPE was applied there was a predominance of mixed fractures. Regarding the CSE group, 0.05% CAPE led to more adhesive failures, and the 0.1% concentration resulted in a higher number of cohesive failures in dentin. Higher MMP-2 concentrations were detected for the groups that did not undergo demineralization treatment, and the lowest values for the ASB groups treated with CAPE. SEM analysis showed no influence of pretreatment with CAPE.

CONCLUSIONS

CAPE did not influence the BS of the adhesives tested, or the micromorphology of the hybrid layer, irrespective of concentration or storage time. CAPE affected the fracture pattern at 24 h, depending on the concentration and the adhesive system used. Immunoassay analysis showed that CAPE 0.1% reduced the MMP-2 concentration in the ASB adhesive without affecting bond strength to dentin.

Chlorhexidine and proanthocyanidin enhance the long-term bond strength of resin-based endodontic sealer

The aim of this study was to evaluate the effects of proanthocyanidin (PA) and chlorhexidine (CHX) on the bond strength (BS), failure pattern, and resin-dentin interface morphology of the endodontic sealers EndoREZ and AH Plus after 24 h and 6 months of water storage. A total of 120 prepared bovine roots were divided into six groups: AH Plus, CHX+AH Plus, PA+AH Plus, EndoREZ, CHX+EndoREZ, and PA+EndoREZ. Dentin was treated for 1 or 5 min with 2% CHX or 15% PA, respectively. Roots were filled and stored in water for 24 h or 6 months (n = 10). Root slices were subjected to push-out test and scanning electron microscopy (SEM). Data were compared using two-way ANOVA and student's t-test (α = 5%). BS decreased over time for AH Plus and untreated EndoREZ (p < 0.05). At 24 h, AH Plus had higher BS than EndoREZ (p < 0.001), with no differences among treatments for both sealers (p > 0.05). At 6 months, EndoREZ had higher BS values for CHX and PA than control (p < 0.05). AH Plus had higher BS than EndoREZ (p < 0.001), while with CHX or PA, similar BS was observed in both sealers (p > 0.05). Cohesive and mixed failures were observed in all groups. SEM revealed sealer tags in the root dentin. In conclusion, BS decreased with time and AH Plus had higher BS than EndoREZ in untreated dentin; however, CHX or PA enhanced long-term BS of EndoREZ. Overall, dentin treatment affected failure pattern and resin-dentin interface morphology, particularly for EndoREZ.

In vitro assessment of ribose modified two-step etch-and-rinse dentine adhesive

OBJECTIVE

Collagen fibrils aid in anchoring resin composite restorations to the dentine substrate. The aim of the study was to investigate effect of non-enzymatic glycation on bond strength and durability of demineralized dentine specimens in a modified two-step etch-and-rinse dentine adhesive.

METHODS

Dentine surfaces were etched with 37% phosphoric acid, bonded with respective in vitro ethanol and acetone adhesives modified with (m/m, 0, 1%, 2% and 3% ribose), restored with restorative composite-resin, and sectioned into resin-dentine slabs and beams to be stored for 24h or 12 months in artificial saliva. Bond-strength testing was performed with bond failure analysis. Pentosidine assay was performed on demineralized ribose modified dentine specimens with HPLC sensitive fluorescent detection. The structural variations of ribose-modified dentine were analysed using TEM and human dental pulpal cells were used for cell viability. Three-point bending test of ribose-modified dentine beams were performed and depth of penetration of adhesives evaluated with micro-Raman spectroscopy. The MMP-2 and cathepsin K activities in ribose-treated dentine powder were also quantified using ELISA. Bond strength data was expressed using two-way ANOVA followed by Tukey's test. Paired T tests were used to analyse the specimens for pentosidine crosslinks. The modulus of elasticity and dentinal MMP-2 and cathepsin K concentrations was separately analyzed using one-way ANOVA.

RESULTS

The incorporation of RB in the experimental two-step etch-and-rinse adhesive at 1% improved the adhesive bond strength without adversely affecting the degree of polymerisation. The newly developed adhesive increases the resistance of dentine collagen to degradation by inhibiting endogenous matrix metalloproteinases and cysteine cathepsins. The application of RB to acid-etched dentine helps maintain the mechanical properties.

SIGNIFICANCE

The incorporation of 1%RB can be considered as a potential candidate stabilizing resin dentine bond.

Effect of smear layer deproteinization on bonding of self-etch adhesives to dentin: a systematic review and meta-analysis

OBJECTIVES

The aim of this systematic review was to critically analyze previously published studies of the effects of dentin surface pretreatment with deproteinizing agents on the bonding of self-etch (SE) adhesives to dentin. Additionally, a meta-analysis was conducted to quantify the effects of the above-mentioned surface pretreatment methods on the bonding of SE adhesives to dentin.

MATERIALS AND METHODS

An electronic search was performed using the following databases: Scopus, PubMed and ScienceDirect. The online search was performed using the following keywords: 'dentin' or 'hypochlorous acid' or 'sodium hypochlorite' and 'self-etch adhesive.' The following categories were excluded during the assessment process: non-English articles, randomized clinical trials, case reports, animal studies, and review articles. The reviewed studies were subjected to meta-analysis to quantify the effect of the application time and concentration of sodium hypochlorite (NaOCl) and hypochlorous acid (HOCl) deproteinizing agents on bonding to dentin.

RESULTS

Only 9 laboratory studies fit the inclusion criteria of this systematic review. The results of the meta-analysis revealed that the pooled average microtensile bond strength values to dentin pre-treated with deproteinizing agents (15.71 MPa) was significantly lower than those of the non-treated control group (20.94 MPa).

CONCLUSIONS

In light of the currently available scientific evidence, dentin surface pretreatment with deproteinizing agents does not enhance the bonding of SE adhesives to dentin. The HOCl deproteinizing agent exhibited minimal adverse effects on bonding to dentin in comparison with NaOCl solutions.

Coronal Microleakage of Teeth Restored with Cast Posts and Cores Cemented with Four Different Luting Agents after Thermocycling

PURPOSE

The apical seal provided by a root canal filling may be breached via coronal leakage. This study aimed to compare the teeth restored with custom-made cast metal posts and cores cemented with different luting agents in terms of coronal microleakage after thermocycling.

MATERIALS AND METHODS

This in vitro study was conducted on 32 extracted single-canal teeth. Root canals were prepared by step-back technique and filled with gutta percha and sealer. The coronal 7 mm of gutta percha was removed, and post space was prepared using peeso reamers #2 and #3 consecutively. After fabricating the acrylic resin patterns of the posts and cores, they were cast using Ni-Cr metal alloy. The specimens were divided into 4 groups in which the castings were cemented using one of the following luting agents: zinc phosphate (ZP), glass ionomer (GI), Panavia F 2.0, and Speed CEM. After cementation, the teeth were immersed in distilled water and incubated for 7 days. Then, the teeth were subjected to thermocycling, immersed in silver nitrate for 6 hours, and finally sectioned. The degree of dye penetration into the coronal part of the specimens was measured using a stereomicroscope. Data were analyzed using Kruskal-Wallis and Mann-Whitey U tests with significance level of 0.05.

RESULTS

The median microleakage in ZP, Speed CEM, GI, and Panavia were 171.89, 114.76, 26.51, and 20.02 μm, respectively. Pairwise comparisons among GI and ZP, GI, and Speed CEM, ZP and Panavia, ZP and Speed CEM, and Panavia and Speed CEM groups yielded significant differences (p < 0.05).

CONCLUSION

Complete coronal seal was not achieved with any of the luting agents. The highest and the lowest degree of microleakage was yielded by ZP and Panavia luting agents, respectively.

Effects of different etching modes on the nanoleakage of universal adhesives: A systematic review and meta-analysis

PURPOSE

The aim of this systematic review was to evaluate how etching modes affect the nanoleakage of universal adhesive from in vitro studies.

MATERIALS AND METHODS

PubMed/MEDLINE, Web of Science, Scopus and Science Direct electronic databases were searched for in vitro studies that evaluated the nanoleakage of universal adhesives. A total of 511 (after duplicate removal) potentially relevant records were identified in the literature search. The titles and abstracts of the retrieved studies were screened by two independent researchers according to the main concept. Subsequently, the full text of potentially relevant studies was screened using the exclusion criteria. Thirteen studies were subjected to qualitative analysis, and 5 of them were selected for a detailed meta-analysis.

RESULTS

Seven universal adhesives were evaluated in this review. The meta-analysis demonstrated that the etch-and-rinse technique significantly reduced the nanoleakage of the Peak Universal and G-Bond Plus adhesives, whereas the self-etch mode reduced the nanoleakage of All-Bond Universal. In comparison, the etching technique did not significantly alter the nanoleakage of either Prime&Bond Elect or Scotchbond Universal which was characterized by the smallest nanoleakage.

CONCLUSIONS

Etching modes significantly, in various ways, influence the nanoleakage of universal adhesives.

CLINICAL SIGNIFICANCE

Contrary to the drive to simplify bonding technologies, an appreciation of their adhesive components and how these perform according to bonding technique could yield a knowledge-based practical approach that ultimately improves the longevity of direct composite restorations.

Influence of Surface Treatment on Composite Adhesion in Noncarious Cervical Lesions: Systematic Review and Meta-analysis

The purpose of this study was to analyze the influence of dentin surface treatments on the retention rate of resin composite restorations in non-carious cervical lesions (NCCLs). Seven randomized clinical trials were included in this review. Data regarding retention rate, type of surface treatment, and the main characteristics of studies were analyzed. Two reviewers performed a literature search up to December 2016 in eight databases: PubMed (Medline), Lilacs, Ibecs, Web of Science, BBO, Scopus, Scielo and The Cochrane Library. Only clinical trials evaluating dentin surface treatments in resin composite restoration in NCCLs were included. Noncontrolled clinical trials, reviews, editorial letters, case reports, case series and studies published in a language other than English, Portuguese, or Spanish were not included. The included studies evaluated different surface treatments, such as using an adhesive system with a frictional technique, drying the dentin, and removing sclerotic dentin by using a bur and applying EDTA before primer use. The analysis considering the mechanical removal of dentin surface with a bur and the application of an adhesive system in a frictional mode showed these treatments improved retention rates of the resin composite restorations in NCCLs ( p<0.05). There is evidence in the literature suggesting that the mechanical removal of dentin surface with a bur and the application of an adhesive system in a frictional mode could improve the retention rates of resin composite restorations in NCCLs. However, the studies showed high heterogeneity, and additional clinical trials are needed to determine the best dentin treatment option in NCCLs.

Bond Strength and Cytotoxicity of a Universal Adhesive According to the Hybridization Strategies to Dentin

Abstract This study evaluated application protocol (etch-and-rinse/ER and self-etching/SE) and dentin wettability (wet and dry) on microtensile bond strength (μTBS) and transdentinal cytotoxicity of ScotchbondTM Universal (SU) adhesive system. The μTBS values and fracture mode were registered 24 h after adhesive system application and resin composite block build-up (n=5). For analysis of transdentinal cytotoxicity, odontoblast-like MDPC-23 cells were seeded on pulpal surface of dentin discs (0.4 mm thick) adapted to artificial pulp chambers (n=8). The adhesive system was applied to occlusal surface, followed by 24-h incubation time. Cell viability (Alamar Blue) and morphology (SEM) were assessed. Adper Single Bond 2 and Clearfil SE Bond were used as positive controls of the ER and SE application protocols, respectively. No treatment was performed on negative control (NC) group. Data were analyzed by ANOVA and Tukey’s tests (α=5%). Higher μTBS values were found for ER mode in comparison with SE protocol (p<0.05). Dentin wettability had no effect on bond strength of SU in both the ER and SE techniques (p>0.05). Most fractures involved hybrid layer and/or adhesive layer. Neither variable prevented the intense toxic effects of adhesive systems on MDPC-23 cultured cells, since intense reduction in cell viability (±88%) and severe alterations in cell morphology were observed for all groups compared to NC, with no differences among them (p>0.05). Therefore, it was concluded that application of SU following the ER protocol had better adhesive performance. However, this adhesive system featured intense transdentinal cytotoxicity to pulp cells, regardless of application protocol and dentin wettability.

Comparative evaluation of the effect of different disinfecting agents on bond strength of composite resin to dentin using two-step self-etch and etch and rinse bonding systems: An in-vitro study

Objective

This study was carried out to examine the effect of the application of different disinfecting agents on the shear bond strength (SBS) of an etch-and-rinse system.

Materials and Methods

A total of 120 dentin surfaces of human molars were taken. Sixty samples were taken for immediate (testing was done after 24 h) and delayed (testing was done after 6 months) each. Further, they were divided into three subgroups (n = 20) according to the disinfectant used: Group I: control (no disinfectant); Group II: chlorhexidine based; and Group III: Aloe barbadensis miller (Aloe vera) based. Dentine bonding agent was applied, and resin composite build-ups were done for SBS testing. Samples were examined under scanning electron microscope for observing the gap formation for dentin-restoration interface. SBS results were statistically analyzed.

Results

The results of the study showed that both chlorhexidine and aloe vera had improved bond strength as compared to the control group both for immediate and delayed SBSs.

Conclusion

Thus, aloe vera can be used as an alternative to chlorhexidine for cavity disinfection.

Microtensile bond strength, 4-point bending and nanoleakage of resin-dentin interfaces: Effects of two matrix metalloproteinase inhibitors

Chronic degradation of hybrid layer collagen by matrix metalloproteinases (MMPs) jeopardizes resin-dentin interfacial integrity and limits the durability of dental restorations. The 4-point bending strength (BS) is a valid but uncommon method of testing the mechanical behavior of resin-dentin interfaces. The present study aims to analyze the influence of two matrix metalloproteinase inhibitors on microtensile bond strength (µTBS), BS and nanoleakage. A total of 48M were divided into three groups according to bonding procedure. Teeth were horizontally sectioned to produce a flat dentin surface. In the control group, etch-and-rinse Prime&Bond One (Dentsply) bonding was used; in the self-etch group, methacryloyloxydodecylpyridinium bromide (MDPB)-containing Clearfil SE Protect (Kuraray) was used; and in the benzalkonium chloride (BAC)-etch group, BAC-etchant (Bisco) was used. A Ceram.X-One (Dentsply) composite was built as three successive layers and was light-cured. Samples were sectioned to produce microrods that were randomly divided into two groups for analysis at baseline and after 6 months of water immersion (n = 32), plus one slab for nanoleakage analysis (n = 8) via scanning electron microscopy (SEM) and digital image analysis (Fiji). Data were analyzed using the Weibull distribution and a mixed-model ANOVA with a post hoc Tukey test. All groups showed deterioration of the initial bonds. The self-etch group had a worse baseline µTBS than the control but had the best BS after aging. BAC-etch did not improve bond stability of etch-and-rinse adhesive. The µTBS and BS test results after aging were moderately correlated. Mixed fractures prevailed with regard to µTBS, whereas adhesive fractures dominated with regard to BS. Nanoleakage was not eliminated in any group and increased after aging. MDPB self-etch resisted bond degradation better than etch-and-rinse adhesives, even after BAC-etching. Integrating BS in studies of µTBS and nanoleakage might provide more clinically relevant outcomes for predicting the performance of dental adhesives.

Adhesive Durability Inside the Root Canal Using Self-adhesive Resin Cements for Luting Fiber Posts

OBJECTIVES

The aim of the study was to investigate the effects of various self-adhesive resin cements on the push-out bond strengths and nanoleakage expression at the luting interfaces of fiber posts immediately and after one year of aging.

METHODS AND MATERIALS

One hundred forty-four extracted human anterior teeth were endodontically treated. After post space preparation, fiber posts were luted using five commercially available self-adhesive resin (SAR) cements and a core build-up material applied with a self-etch adhesive (BF: Bifix SE/Rebilda Post, VOCO; CSA: Clearfil SA Cement/Rely X Fiber Post, 3M ESPE; RX: RelyX Unicem 2/Rely X Fiber Post, 3M ESPE; SPC: Speed Cem/FRC Postec, Ivoclar Vivadent; SMC: Smart Cem/X Post, Dentsply; RB: Rebilda DC-Futurabond/Rebilda Post; n=22). For each group, half of the specimens were subjected to thermocycling (TC) (5°C-55°C, 10,000 cycles) and stored humid for one year at 37°C. Push-out bond strength data of six slices (thickness 1 mm) per root and nanoleakage expression of representative specimens were evaluated after 24 hours (baseline) and after TC and storage for one year (aging), respectively.

RESULTS

Bond strength differed significantly among resin cements (p<0.0005) and the location inside the root canal (p<0.0005), but not by aging (p=0.390; repeated-measures analysis of variance). SMC (14.6±5.8 MPa) and RX (14.1±6.8 MPa) revealed significantly higher bond strength compared to BF (10.6±5.4 MPa) and RB (10.0±4.6 MPa) but differed not significantly from SPC (12.8±4.8) MPa; CSA (6.1±4.6 MPa) revealed significantly lower bond strength compared to all other investigated materials (p<0.05; Tukey Honestly Significantly Different). Qualitative nanoleakage analysis revealed more silver deposits at the interface in all groups after aging. For CSA, a large amount of silver deposits inside the cement was also observed at baseline and after aging.

CONCLUSIONS

Fiber post luting using SAR cements demonstrated reliable bond strengths. Product-specific differences and initial degradation effects could be demonstrated.

12 Years of Repair of Amalgam and Composite Resins: A Clinical Study

OBJECTIVE

The objective of this study was to clinically evaluate repaired posterior amalgam and composite restorations over a 12 year period, investigate the influence of repair in the survival of restorations, and compare their behavior with respect to controls.

METHODS

Thirty-four patients, 18 to 80 years of age with 167 restorations, 67 composite resin (RC), and 100 amalgam (AM) restorations, participated. Restorations with localized, marginal, anatomical deficiencies and/or secondary caries, and "clinically judged" suitable for repair or replacement according to US Public Health Service (USPHS) criteria, were randomly assigned to four groups: repair (n=35, 20 AM, 15 RC), replacement (n=43, 21 AM, 22 RC), positive control (n=71, 49 AM, 22 RC), or negative control (n=18, 10 AM, 8 RC). The quality of the restorations was blind scored according to the modified USPHS criteria. Two examiners scored them at initial status (κ=0.74) and after one to five, 10, and 12 years (κ=0.88). Wilcoxon and Mann-Whitney tests provided for comparisons within the same group and between years, respectively.

RESULTS

After 12 years, all groups behaved similarly in marginal adaptation, marginal stain, teeth sensitivity, anatomic form, and luster ( p≥0.05). Better behavior in roughness was observed in replaced RC ( p=0.049).

CONCLUSIONS

Given that most clinical parameters investigated were similar between all groups during the follow-up, the repair of RC and AM restorations is a good clinical option because it is minimally invasive and can consistently increase the longevity of restorations.

Fatigue resistance of dentin bonds prepared with two- vs. three-step adhesives: Effect of carbodiimide

The application of a cross-linker to demineralized dentin is reportedly effective at extending the durability of dentin bonds.

OBJECTIVE

To compare the effect of a cross-linker pretreatment on the fatigue crack growth resistance of resin-dentin bonds prepared with a two- vs. three-step adhesive system.

METHODS

Bonded interface Compact Tension (CT) specimens were prepared using commercial two- and three-step etch-and-rinse adhesives and compatible hybrid resin-composite. For the treated groups, adhesive bonding was preceded by a 1min application of an experimental carbodiimide (EDC) conditioner to the acid-etched dentin. The control groups received no such treatment. The fatigue crack growth resistance was examined after storage in artificial saliva at 37°C for 0, 3 and 6 months.

RESULTS

There was no significant difference in the immediate fatigue crack growth resistance the control and EDC-treated groups at 0 months for either adhesive system. After 3 and 6 months of storage, the EDC-treated groups exhibited significantly greater (p≤0.05) fatigue crack growth resistance than the controls. Although the EDC treatment was equally effective in deterring degradation for both adhesives, bonds prepared with the three-step system exhibited the lowest resistance to fatigue crack growth overall.

SIGNIFICANCE

An EDC treatment applied during dentin bonding could help maintain the durability of bonds prepared with two or three-step adhesive bonding systems.

Effect of a 12-methacryloyloxy-dodecyl-pyridinium-bromide-containing adhesive with different post types on the long-term bond strength to dentin

The use of matrix metalloproteinase (MMPs) inhibitors, such as 12-methacryloyloxy-dodecyl-pyridinium-bromide (MDPB), might improve the adhesion of glass-fiber (GF) and polyfiber (PF) posts to root dentine. This study assessed the effect of an MDPB-containing adhesive on the long-term bond strength of GF or PF posts to bovine dentine. Bovine endodontically treated roots were randomly divided into six groups, according to the post type and adhesive system used, as follows: GF serrated post + MDBP-free adhesive; GF serrated post + MDPB-containing adhesive; GF smooth post + MDBP-free adhesive; GF smooth post + MDPB-containing adhesive; PF post + MDBP-free adhesive; PF post + MDPB-containing adhesive. Specimens were stored in water for 6 months, thermocycled (500 cycles wk^-1 ), and submitted to the pull-out test and failure pattern analysis. The cement-dentin interface was evaluated using scanning electron microscopy. The pull-out data were analyzed using anova and Tukey's test (α = 0.05). No significant interaction between the type of post and the adhesive system was found. Polyfiber posts showed lower bond strength than GF posts, whether serrated or smooth, and the bond strength of the serrated and smooth GF posts was not significantly different. Adhesive failures were predominant in all groups. The type of retainer influenced the bond strength, and MDPB-containing adhesive did not improve the long-term bond strength of posts to dentine.

Evaluate the effect of different mmps inhibitors on adhesive physical properties of dental adhesives, bond strength and mmp substarte activity

We have evaluated and compare the effect of different exogenous MMP inhibitors on adhesive physical properties of dental adhesives, bond strength, micro permeability and MMP substrate activity. 180-grit Sic paper was used to obtain the superficial dentin surface from each and every tooth after the wet grinding procedure. Dentin was exposed to four different MMP inhibitors to evaluate the effect on resin adhesive dentin interface. The four groups used in study were: 2% chlorhexidine digluconate, 2% doxycycline solution, 5% Proanthocyanidin (PR), Control Group. We evaluated and compared the four groups at each and every step of etching, bonding and resin application. Then, the immunolabeling was done with the help of the secondary antibodies with the pH of 7 and the dilution of 1:20. Amongst all the etching pretreatment groups, CHE group (Chlorhexidine etching group) revealed highest exposure to collagen fibrils than the other groups of etching. Then after the CHE group, the next group which has the second highest exposure DOE group. MMP inhibitor application for time duration of 1 minute after the etching procedures significantly improves the bond strength, exposure to collagen fibres and uniforms the dense form of dentin hybrid layer.

Fatigue testing of biomaterials and their interfaces

OBJECTIVE

The objective of this article is to describe the importance of fatigue to the success of restorative dentistry, with emphasis on the methods for evaluating the fatigue properties of materials in this field, and the durability of their bonded interfaces.

METHODS

The stress-life fatigue and fatigue crack growth approaches for evaluating the fatigue resistance of dental biomaterials are introduced. Emphasis is placed on in vitro studies of the hard tissue foundation, restorative materials and their bonded interfaces. The concept of durability is then discussed, including the effects of conventional "mechanical" fatigue combined with pervasive threats of the oral environment, including variations in pH and the activation of endogenous dentin proteases.

RESULTS

There is growing evidence that fatigue is a principal contributor to the failure of restorations and that measures of static strength, used in qualifying new materials and practices, are not reflective of the fatigue performance. Results of selected studies show that the fundamental steps involved in the placement of restorations, including the cutting of preparations and etching, cause a significant reduction to the fatigue strength of the hard tissue foundation. In regards to the bonded interface, results of studies focused on fatigue resistance highlight the importance of the hybridization of resin tags, and that a reduction in integrity of the dentin collagen is detrimental to the durability of dentin bonds.

SIGNIFICANCE

Fatigue should be a central concern in the development of new dental materials and in assessing the success of restorative practices. A greater recognition of contributions from fatigue to restoration failures, and the development of approaches with closer connection to in vivo conditions, will be essential for extending the definition of lifelong oral health.

Influence of EDC on Dentin-Resin Shear Bond Strength and Demineralized Dentin Thermal Properties

This study aimed to evaluate the bonding strength and thermal properties of demineralized dentin with and without EDC treatment. Sound human molars were randomly divided into seven treatment groups (n = 20): control, 80% ethanol, and five EDC ethanol solutions (0.01–1.0 M). In each group, 16 samples were used for bond strength assessment and 4 samples were used for scanning electron microscopy (SEM) analysis. A further 70 intact molars were used to obtain a fine demineralized dentin powder, treated with the same solutions and were evaluated the crosslink degree by ninhydrin test and denaturation temperature (T_d) by differential scanning calorimetry. EDC-treated specimens (<1.0 M) had a higher bond strength, especially 0.3 and 0.5 M group, than the control counterpart. There was a significant drop in bond strength of 1.0 M EDC group. SEM revealed a homogeneous and regular interface under all treatments. EDC treatment significantly increased the demineralized dentin cross-link degree and T_d compared with the control and ethanol treatments. The 0.3 and 0.5 M treatments showed the highest cross-link degree and T_d. In terms of mechnical and theramal properties consideration, 0.3 and 0.5 M EDC solutions may be favorable for when applied with etch-and-rinse adhesives, but it is still needed further long-term study.