Performance of MALDI-TOF MS platforms for fungal identification

Evaluation of the new Id-Fungi plates from Conidia for MALDI-TOF MS identification of filamentous fungi and comparison with conventional methods as identification tool for dermatophytes from nails, hair and skin samples

OBJECTIVES

We first compare the efficiency of mould/dermatophyte identification by MALDI-TOF MS using a new medium called Id-Fungi plates (IDFP) from Conidia^® and two different databases. For the second purpose, we evaluated a new version of the medium supplemented with cycloheximide, Id-Fungi plates Plus (IDFPC) for the direct inoculation of nails, hair and skin samples and compared the efficiency of MALDI-TOF MS identification of dermatophytes to classical methods based on culture and microscopy.

METHODS

A total of 71 strains have been cultured IDFP and Sabouraud gentamicin plates (SGC2) and were identified by MALDI-TOF MS. For the evaluation of the combination IDFPC/ MALDI-TOF MS as a method of identification for dermatophytes, 428 samples of hair nails and skin were cultivated in parallel on IDFPC and Sabouraud + cycloheximide medium (SAB-ACTI).

RESULTS

For Aspergillus sp and non-Aspergillus moulds, the best performances were obtained on IDFP after maximum 48-h growth, following protein extraction. For dermatophytes, the best condition was using the IDFP at 72 hours, after extended direct deposit. Regarding the direct inoculation of nails, hair skin on IDFPC, 129/428 (30.1%) showed a positive culture against 150/428 (35%) on SAB-ACTI medium. Among the 129 positive strains, the identification by MALDI-TOF MS was correct for 92/129 (71.4%).

CONCLUSION

The IDFP allows the generation of better spectra by MALDI-TOF MS compared to SGC2. It facilitates sampling and deposit. Regarding the use of IDFPC, this medium seems less sensitive than SAB-ACTI but among positive strains, the rate of correct identification by MALDI-TOF MS is satisfactory.

Identification by Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry and Antifungal Susceptibility Testing of Non-Aspergillus Molds

Non-Aspergillus molds including Mucorales, Fusarium, and Scedosporium, etc. are emerging pathogens leading to higher mortality in immunocompromised patients. Fifty-two isolates of genetically confirmed non-Aspergillus molds representing 16 species from 8 genera were collected to evaluate the performance of the Bruker matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) in identification of non-Aspergillus molds. Antifungal susceptibilities were determined through the Clinical & Laboratory Standards Institute (CLSI) M38-A2 broth microdilution method and the Sensititre YeastOne colorimetric method. Bruker MALDI-TOF MS identified 57.7% (30/52) of isolates cultured in broth and 15.4% (8/52) of isolates cultured on solid agar media to the species level, respectively, according to standard interpretation criteria. Lowering the species level cut-off value (COV) from ≥2.0 to ≥1.7 could improve the MALDI-TOF MS species-level identification rate to 67.3% (38/52) for isolates cultured on solid media, with a slight increase of false identification rate of 2.6% (1/38). Amphotericin B was the most in vitro fungistatic-active agent for 98.1% (51/52) of the tested non-Aspergillus molds, with minimum inhibitory concentrations (MICs) of ≤2 μg/mL. The susceptibilities to triazoles varied, with MICs of 0.12 to >16 μg/mL among different species of non-Aspergillus molds. The correlation between the CLSI method and Sensititre YeastOne on antifungal susceptibility testing of non-Aspergillus molds was good, with essential agreement (EA) rates of >90% for triazoles and echinocandins except amphotericin B, which had a lower EA rate of 84.6%. In conclusion, a favorable performance of the Bruker MALDI-TOF MS in identification of clinical non-Aspergillus isolates directly inoculated on solid agar media could be achieved with the adoption of alternative interpretation criteria. Antifungal susceptibility testing is important for non-Aspergillus molds, especially when information on triazole susceptibility is required, and the Sensititre YeastOne is a practical and reliable method to determine antifungal susceptibilities of non-Aspergillus molds.

Characterization of volatile metabolites formed by molds on barley by mass and ion mobility spectrometry

The contamination of barley by molds on the field or in storage leads to the spoilage of grain and the production of mycotoxins, which causes major economic losses in malting facilities and breweries. Therefore, on-site detection of hidden fungus contaminations in grain storages based on the detection of volatile marker compounds is of high interest. In this work, the volatile metabolites of 10 different fungus species are identified by gas chromatography (GC) combined with two complementary mass spectrometric methods, namely, electron impact (EI) and chemical ionization at atmospheric pressure (APCI)-mass spectrometry (MS). The APCI source utilizes soft X-radiation, which enables the selective protonation of the volatile metabolites largely without side reactions. Nearly 80 volatile or semivolatile compounds from different substance classes, namely, alcohols, aldehydes, ketones, carboxylic acids, esters, substituted aromatic compounds, alkenes, terpenes, oxidized terpenes, sesquiterpenes, and oxidized sesquiterpenes, could be identified. The profiles of volatile and semivolatile metabolites of the different fungus species are characteristic of them and allow their safe differentiation. The application of the same GC parameters and APCI source allows a simple method transfer from MS to ion mobility spectrometry (IMS), which permits on-site analyses of grain stores. Characterization of IMS yields limits of detection very similar to those of APCI-MS. Accordingly, more than 90% of the volatile metabolites found by APCI-MS were also detected in IMS. In addition to different fungus genera, different species of one fungus genus could also be differentiated by GC-IMS.

Rapid discrimination of fungal species by the colony fingerprinting

The contamination of foods and beverages by fungi is a severe health hazard. The rapid identification of fungi species in contaminated goods is important to avoid further contamination. To this end, we developed a fungal discrimination method based on the bioimage informatics approach of colony fingerprinting. This method involves imaging and visualizing microbial colonies (referred to as colony fingerprints) using a lens-less imaging system. Subsequently, the quantitative image features were extracted as discriminative parameters and subjected to analysis using machine learning approaches. Colony fingerprinting has been previously found to be a promising approach to discriminate bacteria. In the present proof-of-concept study, we tested whether this method is also useful for fungal discrimination. As a result, 5 fungi belonging to the Aspergillus, Penicilium, Eurotium, Alternaria, and Fusarium genera were successfully discriminated based on the extracted parameters, including the number of hyphae and their branches, and their intensity distributions on the images. The discrimination of 6 closely-related Aspergillus spp. was also demonstrated using additional parameters. The cultivation time required to generate the fungal colonies with a sufficient size for colony fingerprinting was less than 48 h, shorter than those for other discrimination methods, including MALDI-TOF-MS. In addition, colony fingerprinting did not require any cumbersome pre-treatment steps prior to discrimination. Colony fingerprinting is promising for the rapid and easy discrimination of fungi for use in the ensuring the safety of food manufacturing.

Microbiology of Cystic Fibrosis Airway Disease

Although survival of individuals with cystic fibrosis (CF) has been continuously improving for the past 40 years, respiratory failure secondary to recurrent pulmonary infections remains the leading cause of mortality in this patient population. Certain pathogens such as Pseudomonas aeruginosa, methicillin-resistant Staphylococcus aureus, and species of the Burkholderia cepacia complex continue to be associated with poorer clinical outcomes including accelerated lung function decline and increased mortality. In addition, other organisms such as anaerobes, viruses, and fungi are increasingly recognized as potential contributors to disease progression. Culture-independent molecular methods are also being used for diagnostic purposes and to examine the interaction of microorganisms in the CF airway. Given the importance of CF airway infections, ongoing initiatives to promote understanding of the epidemiology, clinical course, and treatment options for these infections are needed.

Recent trends in the epidemiology, diagnosis, treatment, and mechanisms of resistance in clinical Aspergillus species: A general review with a special focus on the Middle Eastern and North African region

Globally, more than billion people suffer from fungal infections each year. The early diagnosis of aspergillosis is mandatory for successful treatment outcome. As careful testing takes time, epidemiological surveillance is crucial to guide individual patient therapy and to promote a high standard of health care. In this paper, we first present current trends in the epidemiology and antifungal susceptibility patterns of Aspergillus spp. in Middle Eastern and North African (MENA) countries in order to support infectious disease specialists and health workforces in this geographic area to treat adequately patients with aspergillosis. Then we discuss the existing literature data regarding the available diagnostic tools and antifungal resistance mechanisms of Aspergillus spp. Although a limited number of studies were reviewed here, the currently available data show that Aspergillus infections are not negligible in the MENA region, and that the emergence of antifungal resistance is a growing health issue, especially among immunocompromised patients.

Repurposing of Ribavirin as an Adjunct Therapy against Invasive Candida Strains in an In Vitro Study

The use of antifungal agents in clinical settings is limited by the appearance of drug resistance and adverse side effects. There is, therefore, an urgent need to develop new drugs to strengthen the treatment of invasive fungal diseases. The aim of this study is to describe the potential repurposing of ribavirin as an adjunct therapy against Candida spp. Primary screening of a Prestwick Chemical library against Candida albicans ATCC 90028 and fluconazole-resistant Candida albicans strains was performed. Subsequently, we evaluated the responses of 100 Candida sp. strains to ribavirin, an antiviral agent, using the broth microdilution method as recommended by CLSI. We checked the involvement of efflux pump activity in the development of ribavirin resistance. We studied time-kill curves and performed a checkerboard assay for a ribavirin-antifungal combination study. Twenty-one nonstandard antifungal compounds were identified, including ribavirin. Ribavirin had antifungal activity in vitro against 63 Candida strains, including strains of C. albicans, C. parapsilosis, and C. tropicalis, with MICs ranging from 0.37 to 3.02 μg/ml, while MICs for C. krusei, C. glabrata, C. lusitaniae, and some C. albicans strains remained high (≥24.16 μg/ml). No relation was observed between efflux pump activity and ribavirin resistance. Ribavirin exhibited fungistatic activity against multidrug-resistant (MDR) C. albicans and fungicidal activity against a C. parapsilosis strain. In addition, ribavirin acted synergistically with azoles against Candida strains for which ribavirin MICs were <24.4 μg/ml. This study highlights the potential clinical application of ribavirin, alone or in association with other antifungal agents, as an adjunct anti-Candida drug.

Vitek® MS v3.0 System in the Identification of Filamentous Fungi

Infections caused by filamentous fungi are rising in incidence and became a serious health concern. Their rapid and reliable identification in the clinical laboratory is essential for an early and accurate diagnosis to guide timely therapy. Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) has been reported as a rapid and reliable method for identification of bacteria and yeasts isolated from clinical samples. However, it has less used for molds identification. The aim of this study was to evaluate Vitek^® MS (a MALDI-TOF MS system) ability to identify molds and differentiate species within a complex. A collection of 90 filamentous fungi, 70 clinical and 20 environmental isolates, was studied by morphological and molecular methods and by Vitek^® MS. Seventy-four isolates (82.2%) were identified using Vitek^® MS v3.0 at Genus/Complex/Species group level; within these, 47/74 (63.5%) were correctly identified at species level and only one was misidentified. In contrast, 16/90 isolates (17.8%) were not identified, of which 13 were not present in the database. Results here expressed favor Vitek^® MS v3.0 as a very useful system for identification of most common clinical isolates of filamentous fungi. Accordingly, it may be an important tool for clinical microbiology laboratories in their task to answer to clinicians, adequately and rapidly, helping in proper patient's management.

Development and validation of an extended database for yeast identification by MALDI-TOF MS in Argentina

Matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) has revolutionized the identification of microorganisms in clinical laboratories because it is rapid, relatively simple to use, accurate, and can be used for a wide number of microorganisms. Several studies have demonstrated the utility of this technique in the identification of yeasts; however, its performance is usually improved by the extension of the database. Here we developed an in-house database of 143 strains belonging to 42 yeast species in the MALDI Biotyper platform, and we validated the extended database with 388 regional strains and 15 reference strains belonging to 55 yeast species. We also performed an intra- and interlaboratory study to assess reproducibility and analyzed the use of the cutoff values of 1.700 and 2.000 to correctly identify at species level. The creation of an in-house database that extended the manufacturer's database was successful in view of no incorrect identification was introduced. The best performance was observed by using the extended database and a cutoff value of 1.700 with a sensitivity of .94 and specificity of .96. A reproducibility study showed utility to detect deviations and could be used for external quality control. The extended database was able to differentiate closely related species and it has potential in distinguishing the molecular genotypes of Cryptococcus neoformans and Cryptococcus gattii.

Polyphasic, Including MALDI-TOF MS, Evaluation of Freeze-Drying Long-Term Preservation on Aspergillus (Section Nigri) Strains

This study aims to evaluate the effect of freeze-drying and long-term storage on the biotechnological potential of Aspergillus section Nigri strains. Twelve selected strains were freeze-dried and aged by accelerated storage, at 37 °C in the dark, for 2 and 4 weeks. To assess possible changes as a consequence of the ageing in the freeze-drying ampoules, morphological characteristics, mycotoxins and enzymes production, matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALTI-TOF MS) spectra, and M13 phage probe fingerprinting were used as part of a polyphasic approach. Phenotypical changes were observed; nevertheless, they did not substantially affect the potential biotechnological use of these strains. The activity of hydrolytic enzymes (protease, carboxymethylcellulase, xylanase, pectinase and mannanase) was maintained or increased after freeze-drying. MALDI-TOF MS data originated spectra that grouped, for the majority of samples, according to strain independently of preservation time point. M13 profiles revealed the presence of some genetic polymorphisms after preservation. However, the three studied times still clustered for more than 50% of strains. Our results show that the studied strains maintain their biotechnological potential after preservation, with minimal phenotypic alterations. These findings provide evidence that freeze-drying preservation is a suitable option to preserve biotechnologically relevant aspergilli strains from section Nigri, and one should consider that the observed effects might be species/strain-dependent.

CNS Infections Caused by Brown-Black Fungi

Central nervous system (CNS) infections caused by brown-black or dematiaceous fungi are distinctly rare and represent a small proportion of infections termed phaeohyphomycoses. However, these are becoming more commonly reported. Though many fungi have been implicated in disease, most cases are caused by only a few species, Cladophialophora bantiana being the most common. Most of the fungi described are molds, and often cause infection in immunocompetent individuals, in contrast to infection with other more common molds such as Aspergillus, which is usually seen in highly immunocompromised patients. Diagnosis is challenging, as there are no specific tests for this group of fungi. In addition, these infections are often refractory to standard drug therapies, requiring an aggressive combined surgical and medical approach to improve outcomes, yet mortality remains high. There are no standardized treatments due to a lack of randomized clinical trials, though guidelines have been published based on available data and expert opinion.

Identification of Mucorales by Matrix-Assisted Laser Desorption Ionization Time-of-Flight Mass Spectrometry

More than 20 different species of Mucorales can be responsible for human mucormycosis. Accurate identification to the species level is important. The morphological identification of Mucorales is not reliable, and the currently recommended identification standard is the molecular technique of sequencing the internal transcribed spacer regions. Nevertheless, matrix-assisted laser desorption ionization time-of-flight mass spectrometry has been shown to be an accurate alternative for the identification of bacteria, yeasts, and even filamentous fungi. Therefore, 38 Mucorales isolates, belonging to 12 different species or varieties, mainly from international collections, including 10 type or neo-type strains previously identified by molecular methods, were used to evaluate the usefulness of matrix-assisted laser desorption ionization time-of-flight mass spectrometry for the identification of human pathogenic Mucorales to the species level. One to three reference strains for each species were used to create a database of main spectrum profiles, and the remaining isolates were used as test isolates. A minimum of 10 spectra was used to build the main spectrum profile of each database strain. Interspecies discrimination for all the isolates, including species belonging to the same genus, was possible. Twenty isolates belonging to five species were used to test the database accuracy, and were correctly identified to the species level with a log-score >2. In summary, matrix-assisted laser desorption ionization time-of-flight mass spectrometry is a reliable and rapid method for the identification of most of the human pathogenic Mucorales to the species level.

In vitro polymyxin activity against clinical multidrug-resistant fungi

Background

Although antifungals are available and usually used against fungal infections, multidrug-resistant (MDR) fungal pathogens are a growing problem for public health. Moreover, fungal infections have become more prevalent nowadays due to the increasing number of people living with immunodeficiency. Thus, previously rarely-isolated and/or unidentified fungal species including MDR yeast and moulds have emerged around the world. Recent works indicate that polymyxin antibiotics (polymyxin B and colistin) have potential antifungal proprieties. Therefore, investigating the in vitro activity of these molecules against clinical multidrug-resistant yeast and moulds could be very useful.

Methods

In this study, a total of 11 MDR yeast and filamentous fungal strains commonly reported in clinical settings were tested against polymyxin antibiotics. These include strains belonging to the Candida, Cryptococcus and Rhodotorula yeast genera, along with others belonging to the Aspergillus, Fusarium, Scedosporium, Lichtheimia and Rhizopus mould genera. The fungicidal or fungistatic action of colistin against clinical yeast strains was determined by the time-kill study. Further, a checkerboard assay for its combination with antifungal agents, usually used in clinical practices (amphotericin B, itraconazole, voriconazole), was carried out against multi-drug resistant fungal strains.

Results

Polymyxin B and colistin exhibited an antifungal activity against all MDR fungal strains tested with MICs ranging from 16 to 128 μg/ml, except for the Aspergillus species. In addition, colistin has a fungicidal action against yeast species, with minimum fungicidal concentrations ranging from 2 to 4 times MICs. It induces damage to the MDR Candida albicans membrane. A synergistic activity of colistin-amphotericin B and colistin-itraconazole associations against Candida albicans and Lichtheimia corymbifera strains, respectively, and colistin-fluconazole association against Rhodotorula mucilaginosa, was demonstrated using a checkerboard microdilution assay.

Conclusion

colistin could be proposed, in clinical practice, in association with other antifungals, to treat life-threatening fungal infections caused by MDR yeasts or moulds.

Identifying indoor air Penicillium species: a challenge for allergic patients

PURPOSE

Penicillium is the most common mould isolated in housing. Penicillium chrysogenum is the only species tested by prick test or serology for allergic patients. The American Institute of Medicine has accepted Penicillium as an aetiological agent of rhinitis in children and adults and as an asthma agent in children. However, few studies have identified Penicillium in housing to the species level (354 species). Phenotypic identification is difficult. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) should be an alternative. The aim of this study was (1) to identify the Penicillium species present in dwellings in Eastern France and (2) to evaluate the reliability of MALDI-TOF MS for identification, by comparing it to DNA sequencing and phenotypic identification.

METHODOLOGY

Identification to the species level was performed by MALDI-TOF MS on 275 strains isolated from 48 dwellings. These results were compared to beta-tubulin gene sequencing and to the phenotypic aspects.

RESULTS

Thanks to MALDI-TOF, 235/275 strains could be identified (85.5 %). Fourteen species were identified among 23 Penicillium species included in the Filamentous Fungi Library 1.0 (Bruker Daltonics). However, 72.2  % of the strains belonged to five main taxa: P. chrysogenum (27.3 %), Penicillium glabrum (22.9 %), Penicilliumcommune (11.3 %), Penicillium brevicompactum (6.5 %) and Penicillium expansum (4.2 %).

CONCLUSION

Complete coherence between MALDI-TOF MS and sequence-based identification was found for P. chrysogenum, P. expansum, P. glabrum, Penicillium italicum and Penicillium corylophilum. The main drawback was observed for Penicillium crustosum, which included 21 strains (7.6 %) that could not be identified using MALDI-TOF MS.

Investigating Antifungal Susceptibility in Candida Species With MALDI-TOF MS-Based Assays

Half of invasive fungal infections lead to death. Amongst pathogenic fungi, the most widespread species belong to the Candida genus and vary in their susceptibility to antifungal drugs. The emergence of antifungal resistance has become a major clinical problem. Therefore, the definition of susceptibility patterns is crucial for the survival of patients and the monitoring of resistance epidemiology. Although, most routinely used methods of AntiFungal Susceptibility Testing (AFST) have reached their limits, the rediscovery of Matrix Associated Laser Desorption/Ionization Time of Flight Mass Spectrometry (MALDI-TOF MS) in the field of mycology provides a promising alternative for the study of antifungal resistance. MALDI-TOF MS is already used in mycology for fungal identification, which permits to highlight inherent antifungal resistance. However, the main concern of clinicians is the rise of acquired antifungal resistance and the time needed for their detection. For this purpose, MALDI-TOF MS has been shown to be an accurate tool for AFST, presenting numerous advantages in comparison to commonly used techniques. Finally, MALDI-TOF MS could be used directly to detect resistance mechanisms through typing. Consequently, MALDI-TOF MS offers new perspectives in the context of healthcare associated outbreaks of emerging multi-drug resistant fungi, such as C. auris. As a proof of concept, we will illustrate the current and future benefits in using and adapting MALDI-TOF MS-based assays to define the susceptibility pattern of C. auris, by species identification, AFST, and typing.

The expanding use of matrix-assisted laser desorption/ionization-time of flight mass spectroscopy in the diagnosis of patients with mycotic diseases

INTRODUCTION

Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has emerged as a powerful new tool to identify human fungal pathogens and has radically altered the diagnostic mycology workflow at many medical centers around the world. Areas covered: While most experience is with the identification of yeasts, including species of Candida and Cryptococcus, there is ongoing work investigating the role of MALDI-TOF MS to detect molds, including species of Aspergillus, Fusarium, Scedosporium, and Mucormyctes as well as thermally dimorphic fungi. Expert commentary: In this paper, we review the current knowledge about this important new platform and examine how its expanding use may impact molecular diagnostics and patient care in the years ahead.

Identification of clinical isolates of Aspergillus, including cryptic species, by matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS)

An expanded library of matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) has been constructed using the spectra generated from 42 clinical isolates and 11 reference strains, including 23 different species from 8 sections (16 cryptic plus 7 noncryptic species). Out of a total of 379 strains of Aspergillus isolated from clinical samples, 179 strains were selected to be identified by sequencing of beta-tubulin or calmodulin genes. Protein spectra of 53 strains, cultured in liquid medium, were used to construct an in-house reference database in the MALDI-TOF MS. One hundred ninety strains (179 clinical isolates previously identified by sequencing and the 11 reference strains), cultured on solid medium, were blindy analyzed by the MALDI-TOF MS technology to validate the generated in-house reference database. A 100% correlation was obtained with both identification methods, gene sequencing and MALDI-TOF MS, and no discordant identification was obtained. The HUVR database provided species level (score of ≥2.0) identification in 165 isolates (86.84%) and for the remaining 25 (13.16%) a genus level identification (score between 1.7 and 2.0) was obtained. The routine MALDI-TOF MS analysis with the new database, was then challenged with 200 Aspergillus clinical isolates grown on solid medium in a prospective evaluation. A species identification was obtained in 191 strains (95.5%), and only nine strains (4.5%) could not be identified at the species level. Among the 200 strains, A. tubingensis was the only cryptic species identified. We demonstrated the feasibility and usefulness of the new HUVR database in MALDI-TOF MS by the use of a standardized procedure for the identification of Aspergillus clinical isolates, including cryptic species, grown either on solid or liquid media.

MALDI-TOF MS analysis of bovine and zoonotic Trichophyton verrucosum isolates reveals a distinct peak and cluster formation of a subgroup with Trichophyton benhamiae

The zoophilic dermatophyte Trichophyton verrucosum is the most important causative agent of bovine dermatophytosis. Additionally, it causes profound and poorly healing skin infections in humans indicating the high zoonotic potential. The objective of this study was to establish differentiation of T. verrucosum from other dermatophytes by mass spectrometry and to identify distinct features of the mass spectra. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) was successful for identification of this pathogen only after extension of the database of the manufacturer with spectra from T. verrucosum strains, which were identified as such by sequencing of the internal transcribed spacer (ITS) region. MALDI-TOF MS analysis was conducted with 46 field isolates from cattle, two live vaccine strains, and 10 isolates from humans identified as T. verrucosum by sequence analysis of the ITS region. The results suggest a very good agreement of both methods. Comparison with the mass spectra of 68 strains of other keratinophilic fungi revealed that most T. verrucosum wild-type isolates showed a characteristic peak at 7950-7954 m/z, which was missing in the spectra of other keratinophilic fungi and the live vaccine strains. The spectra of T. verrucosum were most similar to the spectra of T. benhamiae, an emerging zoophilic dermatophyte. In summary, MALDI-TOF MS is a powerful and reliable tool to identify T. verrucosum.

Species boundaries in the Trichophyton mentagrophytes / T. interdigitale species complex

The fungi Trichophyton mentagrophytes and T. interdigitale are closely related species, causing superficial infections in humans and other mammals. The status of these taxa is a field of long-lasting debates. To clarify their phylogenetic relationships within the genus Trichophyton and sharpen the species boundaries, we performed sequencing of four T. mentagrophytes genomes and also evaluated three previously published multilocus data sets. We performed computational species delimitation analysis on all available in GenBank internal transcribed spacer region (ITS) sequences of Trichophyton spp. Phylogenomic data, phylogenetic network, and species delimitation analyses implied that T. mentagrophytes and T. interdigitale belong to the same phylogenetic species. However, we argue that taxonomic status quo should be retained, from the perspective of epidemiological data and the principle of taxonomic stability. Since there is a correlation between ITS genotype and epidemiological source of an isolate, restriction of T. interdigitale to purely anthropophilic ITS genotypes seems to be reasonable.

Comparison of matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF MS) systems for the identification of moulds in the routine microbiology laboratory

OBJECTIVES

The purpose of this study was to compare the efficiency of mould identification of two matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF MS) systems - Vitek MS (VMS) and Microflex LT (MLT) - and the MSI application.

METHODS

Moulds were collected retrospectively and prospectively to display epidemiological diversity of a microbiology laboratory. All of them were identified via sequencing. Strains were then identified using the VMS v3.0, the MLT, and the MSI software applied on MLT spectra. Rates of correct identifications to the species, to the complex, and to the genus level were compared with the molecular reference standard.

RESULTS

A total of 102 isolates were collected. The rate of correct identification to the species level with the MLT was 42.2% (43/102) with a threshold of 1.7 (vs. 16.7% (17/102) with a threshold of 2.0, p < 0.05). The VMS performed better than the MLT with a threshold of 1.7 for species (49.0% (50/102), p 0.33) and complex level identifications (71.6% (73/102) vs. 54.9% (56/102), p < 0.05). However the highest performances were observed when the MLT spectra were analysed via the Mass Spectrometry Identification (MSI) software reaching 90.2% (92/102) of correct identification to the species, 92.2% (94/102) to the species complex and 94.1% (96/102) to the genus level.

CONCLUSIONS

The VMS performed better than the MLT for mould identification. However, it remains of utmost importance to expand commercial databases, as performances of the MLT highly improved when using the MSI software and its extended database, reaching far above the VMS system. Thus the VMS could benefit from the use of this online tool.

Detection of volatile organic compounds in the headspace above mold fungi by GC-soft X-radiation-based APCI-MS

Mold fungi on malting barley grains cause major economic loss in malting and brewery facilities. Possible proxies for their detection are volatile and semivolatile metabolites. Among those substances, characteristic marker compounds have to be identified for a confident detection of mold fungi in varying surroundings. The analytical determination is usually performed through passive sampling with solid phase microextraction, gas chromatographic separation, and detection by electron ionization mass spectrometry (EI-MS), which often does not allow a confident determination due to the absence of molecular ions. An alternative is GC-APCI-MS, generally, allowing the determination of protonated molecular ions. Commercial atmospheric pressure chemical ionization (APCI) sources are based on corona discharges, which are often unspecific due to the occurrence of several side reactions and produce complex product ion spectra. To overcome this issue, an APCI source based on soft X-radiation is used here. This source facilitates a more specific ionization by proton transfer reactions only. In the first part, the APCI source is characterized with representative volatile fungus metabolites. Depending on the proton affinity of the metabolites, the limits of detection are up to 2 orders of magnitude below those of EI-MS. In the second part, the volatile metabolites of the mold fungus species Aspergillus, Alternaria, Fusarium, and Penicillium are investigated. In total, 86 compounds were found with GC-EI/APCI-MS. The metabolites identified belong to the substance classes of alcohols, aldehydes, ketones, carboxylic acids, esters, substituted aromatic compounds, terpenes, and sesquiterpenes. In addition to substances unspecific for the individual fungus species, characteristic patterns of metabolites, allowing their confident discrimination, were found for each of the 4 fungus species. Sixty-seven of the 86 metabolites are detected by X-ray-based APCI-MS alone. The discrimination of the fungus species based on these metabolites alone was possible. Therefore, APCI-MS in combination with collision induced dissociation alone could be used as a supervision method for the detection of mold fungi.

Clinical Mass Spectrometry in the Bioinformatics Era: A Hitchhiker's Guide

Mass spectrometry (MS) is a sensitive, specific and versatile analytical technique in the clinical laboratory that has recently undergone rapid development. From initial use in metabolic profiling, it has matured into applications including clinical toxicology assays, target hormone and metabolite quantitation, and more recently, rapid microbial identification and antimicrobial resistance detection by matrix assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS). In this mini-review, we first succinctly outline the basics of clinical mass spectrometry. Examples of hard ionization (electron ionization) and soft ionization (electrospray ionization, MALDI) are presented to demonstrate their clinical applications. Next, a conceptual discourse on mass selection and determination is presented: quadrupole mass filter, time-of-flight mass spectrometer and the Orbitrap; and MS/MS (tandem-in-space, tandem-in-time and data acquisition), illustrated with clinical examples. Current applications in (1) bacterial and fungal identification, antimicrobial susceptibility testing and phylogenetic classification, (2) general unknown urine toxicology screening and expanded new-born metabolic screening and (3) clinical metabolic profiling by gas chromatography are outlined. Finally, major limitations of MS-based techniques, including the technical challenges of matrix effect and isobaric interference; and novel challenges in the post-genomic era, such as protein molecular variants, are critically discussed from the perspective of service laboratories. Computer technology and structural biology have played important roles in the maturation of this field. MS-based techniques have the potential to replace current analytical techniques, and existing expertise and instrument will undergo rapid evolution. Significant automation and adaptation to regulatory requirements are underway. Mass spectrometry is unleashing its potentials in clinical laboratories.

Evaluation of three MALDI-TOF mass spectrometry libraries for the identification of filamentous fungi in three clinical microbiology laboratories in Manitoba, Canada

Matrix-assisted laser desorption ionisation-time of flight mass spectrometry (MALDI-TOF MS) is commonly used by clinical microbiology laboratories to identify bacterial pathogens and yeasts, but not for the identification of moulds. Recent progress in extraction protocols and the composition of comparative libraries support potential application of MALDI-TOF MS for mould identification in clinical microbiology laboratories. We evaluated the performance of the Bruker Microflex™ MALDI-TOF MS instrument (Billerica, MA, USA) to identify clinical isolates and reference strains of moulds using 3 libraries, the Bruker mould library, the National Institutes of Health (NIH) library and the Mass Spectrometry Identification (MSI) online library, and compared those results to conventional (morphological) and molecular (18S/ITS; gold standard) identification methods. All 3 libraries demonstrated greater accuracy in genus identification (≥94.9%) than conventional methods (86.4%). MALDI-TOF MS identified 73.3% of isolates to species level compared to only 31.7% by conventional methods. The MSI library demonstrated the highest rate of species-level identification (72.0%) compared to NIH (19.5%) and Bruker (13.6%) libraries. Greater than 20% of moulds remained unidentified to species level by all 3 MALDI-TOF MS libraries primarily because of library limitations or imperfect spectra. The overall identification rate of each MALDI-TOF MS library depended on the number of species and the number of spectra representing each species in the library.

Five-Year National Surveillance of Invasive Candidiasis: Species Distribution and Azole Susceptibility from the China Hospital Invasive Fungal Surveillance Net (CHIF-NET) Study

Data on the epidemiology of invasive candidiasis (IC) and the antifungal susceptibility of Candida isolates in China are still limited. Here we report on surveillance for IC from the China Hospital Invasive Fungal Surveillance Net (CHIF-NET) study. Sixty-five tertiary hospitals collected 8,829 Candida isolates from 1 August 2009 to 31 July 2014. Matrix-assisted laser desorption ionization-time of flight mass spectrometry supplemented by ribosomal DNA sequencing was used to define the species, and the fluconazole and voriconazole susceptibilities were determined by the Clinical and Laboratory Standards Institute disk diffusion method. A total of 32 Candida species were identified. Candida albicans was the most common species (44.9%), followed by the C. parapsilosis complex (20.0%), C. tropicalis (17.2%), and the C. glabrata complex (10.8%), with other species comprising <3% of isolates. However, in candidemia, the proportion of cases caused by C. albicans was only 32.3%. C. albicans and C. parapsilosis complex isolates were susceptible to fluconazole and voriconazole (<6% resistance), while fluconazole and azole cross-resistance rates were high in C. tropicalis (13.3% and 12.9%, respectively), C. glabrata complex (18.7% and 14%, respectively), and uncommon Candida species (44.1% and 10.3%, respectively) isolates. Moreover, from years 1 to 5 of the study, there was a significant increase in the rates of resistance to fluconazole among C. glabrata complex isolates (12.2% to 24.0%) and to both fluconazole (5.7% to 21.0%) and voriconazole (5.7% to 21.4%) among C. tropicalis isolates (P < 0.01 for all comparisons). Geographic variations in the causative species and susceptibilities were noted. Our findings indicate that antifungal resistance has become noteworthy in China, and enhanced surveillance is warranted.

Fast identification of dermatophytes by MALDI-TOF/MS using direct transfer of fungal cells on ground steel target plates

Dermatophytes cause human infections limited to keratinised tissues. We showed that the direct transfer method allows reliable identification of non-dermatophytes mould and yeast by MALDI-TOF/MS. We aimed at assessing whether the direct transfer method can be used for dermatophytes and whether an own mass spectra library would be superior to the Bruker library. We used the Bruker Biotyper to build a dermatophyte mass spectra library and assessed its performance by 1/testing a panel of mass spectrum produced with strains genotypically identified and, 2/comparing MALDI-TOF/MS identification to morphology-based methods. Identification of dermatophytes using the Bruker library is poor. Our library provided 97% concordance between ITS sequencing and MALDI-TOF/MS analysis with a panel of 1104 spectra corresponding to 276 strains. Direct transfer method using unpolished target plates allowed proper identification of 85% of dermatophytes clinical isolates most of which were common dermatophytes. A homemade dermatophyte MSP library is a prerequisite for accurate identification of species absent in the Bruker library but it also improves identification of species already listed in the database. The direct deposit method can be used to identify the most commonly found dermatophytes such as T. rubrum and T. interdigitale/mentagrophytes by MALDI-TOF/MS.

Coupling MALDI-TOF mass spectrometry protein and specialized metabolite analyses to rapidly discriminate bacterial function

Mass spectrometry is a powerful technique that has been used to identify bacteria by their protein content and to assess bacterial functional traits through analysis of their specialized metabolites. However, until now these analyses have operated independently, which has resulted in the inability to rapidly connect bacterial phylogenetic identity with potential environmental function. To bridge this gap, we designed a MALDI-TOF mass spectrometry data acquisition and bioinformatics pipeline (IDBac) to integrate data from both intact protein and specialized metabolite spectra directly from bacterial cells grown on agar. This technique organizes bacteria into highly similar phylogenetic groups and allows for comparison of metabolic differences of hundreds of isolates in just a few hours.

For decades, researchers have lacked the ability to rapidly correlate microbial identity with bacterial metabolism. Since specialized metabolites are critical to bacterial function and survival in the environment, we designed a data acquisition and bioinformatics technique (IDBac) that utilizes in situ matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) to analyze protein and specialized metabolite spectra recorded from single bacterial colonies picked from agar plates. We demonstrated the power of our approach by discriminating between two Bacillus subtilis strains in <30 min solely on the basis of their differential ability to produce cyclic peptide antibiotics surfactin and plipastatin, caused by a single frameshift mutation. Next, we used IDBac to detect subtle intraspecies differences in the production of metal scavenging acyl-desferrioxamines in a group of eight freshwater Micromonospora isolates that share >99% sequence similarity in the 16S rRNA gene. Finally, we used IDBac to simultaneously extract protein and specialized metabolite MS profiles from unidentified Lake Michigan sponge-associated bacteria isolated from an agar plate. In just 3 h, we created hierarchical protein MS groupings of 11 environmental isolates (10 MS replicates each, for a total of 110 spectra) that accurately mirrored phylogenetic groupings. We further distinguished isolates within these groupings, which share nearly identical 16S rRNA gene sequence identity, based on interspecies and intraspecies differences in specialized metabolite production. IDBac is an attempt to couple in situ MS analyses of protein content and specialized metabolite production to allow for facile discrimination of closely related bacterial colonies.

Genus- and species-level identification of dermatophyte fungi by surface-enhanced Raman spectroscopy

This paper demonstrates that surface-enhanced Raman spectroscopy (SERS) coupled with principal component analysis (PCA) can serve as a fast and reliable technique for detection and identification of dermatophyte fungi at both genus and species level. Dermatophyte infections are the most common mycotic diseases worldwide, affecting a quarter of the human population. Currently, there is no optimal method for detection and identification of fungal diseases, as each has certain limitations. Here, for the first time, we have achieved with a high accuracy, differentiation of dermatophytes representing three major genera, i.e. Trichophyton, Microsporum, and Epidermophyton. Two first principal components (PC), namely PC-1 and PC-2, gave together 97% of total variance. Additionally, species-level identification within the Trichophyton genus has been performed. PC-1 and PC-2, which are the most diagnostically significant, explain 98% of the variance in the data obtained from spectra of: Trichophyton rubrum, Trichophyton menatgrophytes, Trichophyton interdigitale and Trichophyton tonsurans. This study offers a new diagnostic approach for the identification of dermatophytes. Being fast, reliable and cost-effective, it has the potential to be incorporated in the clinical practice to improve diagnostics of medically important fungi.

Rapid one-step extraction method for the identification of molds using MALDI-TOF MS

Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) has revolutionized fungal identification. Previously, we developed a MALDI-TOF MS mold extraction procedure and comprehensive database. While MALDI-TOF MS has become routine in a few laboratories, it has not yet become widespread. A major obstacle is the lack of a simple, reproducible and uniform protein extraction procedure. In this study, we developed and validated a rapid one-step protein extraction protocol for filamentous fungi. Excised molds were placed into tubes containing zirconia-silica beads and extraction solution without washing or ethanol inactivation steps. Extraction solutions containing different ratios of acetonitrile and formic acid were evaluated. Samples were then processed using a PowerLyzer high power bead based homogenizer and supernatants spotted for MALDI-TOF MS. The rapid method was evaluated prospectively and in parallel to our current mold extraction protocol for 3 months. Analysis of 106 clinical mold isolates resulted in an improved performance and a decrease in extraction time by 30 minutes to a total of 5 minutes of hands-on time. Acceptable identification scores (≥ 2.00) were achieved for up to 63.0% of mold isolates by the rapid method compared with 52.8% of isolates by the current routine protocol. Score comparisons between duplicate spots showed higher reproducibility of the rapid method as compared to the routine method. The rapid extraction method allows efficient analysis of clinical mold isolates both in scheduled batch runs and on an in-demand basis while providing a simple starting platform for laboratories adopting MALDI-TOF MS for mold identification.

Multicenter Evaluation of the Vitek MS v3.0 System for the Identification of Filamentous Fungi

Invasive fungal infections are an important cause of morbidity and mortality affecting primarily immunocompromised patients. While fungal identification to the species level is critical to providing appropriate therapy, it can be slow and laborious and often relies on subjective morphological criteria. The use of matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry has the potential to speed up and improve the accuracy of identification. In this multicenter study, we evaluated the accuracy of the Vitek MS v3.0 system in identifying 1,601 clinical mold isolates compared to identification by DNA sequence analysis and supported by morphological and phenotypic testing. Among the 1,519 isolates representing organisms in the v3.0 database, 91% (n = 1,387) were correctly identified to the species level. An additional 27 isolates (2%) were correctly identified to the genus level. Fifteen isolates were incorrectly identified, due to either a single incorrect identification (n = 13) or multiple identifications from different genera (n = 2). In those cases, when a single identification was provided that was not correct, the misidentification was within the same genus. The Vitek MS v3.0 was unable to identify 91 (6%) isolates, despite repeat testing. These isolates were distributed among all the genera. When considering all isolates tested, even those that were not represented in the database, the Vitek MS v3.0 provided a single correct identification 98% of the time. These findings demonstrate that the Vitek MS v3.0 system is highly accurate for the identification of common molds encountered in the clinical mycology laboratory.

How mass spectrometric approaches applied to bacterial identification have revolutionized the study of human gut microbiota

INTRODUCTION

Describing the human hut gut microbiota is one the most exciting challenges of the 21^st century. Currently, high-throughput sequencing methods are considered as the gold standard for this purpose, however, they suffer from several drawbacks, including their inability to detect minority populations. The advent of mass-spectrometric (MS) approaches to identify cultured bacteria in clinical microbiology enabled the creation of the culturomics approach, which aims to establish a comprehensive repertoire of cultured prokaryotes from human specimens using extensive culture conditions. Areas covered: This review first underlines how mass spectrometric approaches have revolutionized clinical microbiology. It then highlights the contribution of MS-based methods to culturomics studies, paying particular attention to the extension of the human gut microbiota repertoire through the discovery of new bacterial species. Expert commentary: MS-based approaches have enabled cultivation methods to be resuscitated to study the human gut microbiota and thus to fill in the blanks left by high-throughput sequencing methods in terms of culturing minority populations. Continued efforts to recover new taxa using culture methods, combined with their rapid implementation in genomic databases, would allow for an exhaustive analysis of the gut microbiota through the use of a comprehensive approach.

Evaluation of the Bruker Biotyper Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry System for Identification of Aspergillus Species Directly from Growth on Solid Agar Media

We evaluated the accuracy of the Bruker Biotyper matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) system at identifying clinical isolates of Aspergillus species that were grown on agar media. A total of 381 non-duplicate Aspergillus isolates representing 21 different Aspergillus species identified by molecular analysis were included in this study. The Bruker Biotyper MALDI-TOF MS system was able to identify 30.2% (115/381) of the isolates to the species level (score values of ≥2.000) and 49.3% to the genus level (score values of 1.700–1.999). When the identification cutoff value was lowered from ≥2.000 to ≥1.700, the species-level identification rate increased to 79.5% with a slight rise of false identification from 2.6 to 5.0%. From another aspect, a correct species-level identification rate of 89% could be reached by the Bruker Biotyper MALDI-TOF MS system regardless of the score values obtained. The Bruker Biotyper MALDI-TOF MS system had a moderate performance in identification of Aspergillus directly inoculated on solid agar media. Continued expansion of the Bruker Biotyper MALDI-TOF MS database and adoption of alternative cutoff values for interpretation are required to improve the performance of the system for identifying highly diverse species of clinically encountered Aspergillus isolates.

Validation of a New Web Application for Identification of Fungi by Use of Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry

Matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry has emerged as a reliable technique to identify molds involved in human diseases, including dermatophytes, provided that exhaustive reference databases are available. This study assessed an online identification application based on original algorithms and an extensive in-house reference database comprising 11,851 spectra (938 fungal species and 246 fungal genera). Validation criteria were established using an initial panel of 422 molds, including dermatophytes, previously identified via DNA sequencing (126 species). The application was further assessed using a separate panel of 501 cultured clinical isolates (88 mold taxa including dermatophytes) derived from five hospital laboratories. A total of 438 (87.35%) isolates were correctly identified at the species level, while 26 (5.22%) were assigned to the correct genus but the wrong species and 37 (7.43%) were not identified, since the defined threshold of 20 was not reached. The use of the Bruker Daltonics database included in the MALDI Biotyper software resulted in a much higher rate of unidentified isolates (39.76 and 74.30% using the score thresholds 1.7 and 2.0, respectively). Moreover, the identification delay of the online application remained compatible with real-time online queries (0.15 s per spectrum), and the application was faster than identifications using the MALDI Biotyper software. This is the first study to assess an online identification system based on MALDI-TOF spectrum analysis. We have successfully applied this approach to identify molds, including dermatophytes, for which diversity is insufficiently represented in commercial databases. This free-access application is available to medical mycologists to improve fungal identification.

Challenges in Laboratory Detection of Fungal Pathogens in the Airways of Cystic Fibrosis Patients

Study of the clinical significance of fungal colonization/infection in the airways of cystic fibrosis (CF) patients, especially by filamentous fungi, is challenged by the absence of standardized methodology for the detection and identification of an ever-broadening range of fungal pathogens. Culture-based methods remain the cornerstone diagnostic approaches, but current methods used in many clinical laboratories are insensitive and unstandardized, rendering comparative studies unfeasible. Guidelines for standardized processing of respiratory specimens and for their culture are urgently needed and should include recommendations for specific processing procedures, inoculum density, culture media, incubation temperature and duration of culture. Molecular techniques to detect fungi directly from clinical specimens include panfungal PCR assays, multiplex or pathogen-directed assays, real-time PCR, isothermal methods and probe-based assays. In general, these are used to complement culture. Fungal identification by DNA sequencing methods is often required to identify cultured isolates, but matrix-assisted laser desorption/ionization time-of-flight mass spectrometry is increasingly used as an alternative to DNA sequencing. Genotyping of isolates is undertaken to investigate relatedness between isolates, to pinpoint the infection source and to study the population structure. Methods range from PCR fingerprinting and amplified fragment length polymorphism analysis, to short tandem repeat typing, multilocus sequencing typing (MLST) and whole genome sequencing (WGS). MLST is the current preferred method, whilst WGS offers best case resolution but currently is understudied.

MALDI-TOF MS Profiling-Advances in Species Identification of Pests, Parasites, and Vectors

Invertebrate pests and parasites of humans, animals, and plants continue to cause serious diseases and remain as a high treat to agricultural productivity and storage. The rapid and accurate species identification of the pests and parasites are needed for understanding epidemiology, monitoring outbreaks, and designing control measures. Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) profiling has emerged as a rapid, cost effective, and high throughput technique of microbial species identification in modern diagnostic laboratories. The development of soft ionization techniques and the release of commercial pattern matching software platforms has resulted in the exponential growth of applications in higher organisms including parasitology. The present review discusses the proof-of-principle experiments and various methods of MALDI MS profiling in rapid species identification of both laboratory and field isolates of pests, parasites and vectors.

Advances in Rapid Identification and Susceptibility Testing of Bacteria in the Clinical Microbiology Laboratory: Implications for Patient Care and Antimicrobial Stewardship Programs

Early availability of information on bacterial pathogens and their antimicrobial susceptibility is of key importance for the management of infectious diseases patients. Currently, using traditional approaches, it usually takes at least 48 hours for identification and susceptibility testing of bacterial pathogens. Therefore, the slowness of diagnostic procedures drives prolongation of empiric, potentially inappropriate, antibacterial therapies. Over the last couple of years, the improvement of available techniques (e.g. for susceptibility testing, DNA amplification assays), and introduction of novel technologies (e.g. MALDI-TOF) has fundamentally changed approaches towards pathogen identification and characterization. Importantly, these techniques offer increased diagnostic resolution while at the same time shorten the time-to-result, and are thus of obvious importance for antimicrobial stewardship. In this review, we will discuss recent advances in medical microbiology with special emphasis on the impact of novel techniques on antimicrobial stewardship programs.

Comparison of the Bruker Biotyper and VITEK MS Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry Systems Using a Formic Acid Extraction Method to Identify Common and Uncommon Yeast Isolates

Background

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) allows rapid and accurate identification of clinical yeast isolates. In-tube formic acid/acetonitrile (FA/ACN) extraction is recommended prior to the analysis with MALDI Biotyper, but the direct on-plate FA extraction is simpler. We compared the Biotyper with the VITEK MS for the identification of various clinically relevant yeast species, focusing on the use of the FA extraction method.

Methods

We analyzed 309 clinical isolates of 42 yeast species (four common Candida species, Cryptococcus neoformans, and 37 uncommon yeast species) using the Biotyper and VITEK MS systems. FA extraction was used initially for all isolates. If ‘no identification' result was obtained following the initial FA extraction, these samples were then retested by using FA (both systems, additive FA) or FA/ACN (Biotyper only, additive FA/ACN) extraction. These results were compared with those obtained by sequence-based identification.

Results

Both systems correctly identified all 158 isolates of the four common Candida species after the initial FA extraction. The Biotyper correctly identified 8.7%, 30.4%, and 100% of 23 C. neoformans isolates after performing initial FA, additive FA, and FA/ACN extractions, respectively, while VITEK MS identified all C. neoformans isolates after the initial FA extraction. Both systems had comparable identification rates of 37 uncommon yeast species (128 isolates), following the initial FA (Biotyper, 74.2%; VITEK MS, 73.4%) or additive FA (Biotyper, 82.0%; VITEK MS, 73.4%).

Conclusions

The identification rate of most common and uncommon yeast isolates is comparable between simple FA extraction/Biotyper method and VITEK MS methods, but FA/ACN extraction is necessary for C. neoformans identification by Biotyper.

Molecular and Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry-Based Characterization of Clinically Significant Melanized Fungi in India

Melanized or black fungi are a heterogeneous group of fungi causing cutaneous to systemic diseases with high mortality. These fungi are rarely reported as agents of human infections, primarily due to difficulties in their classical identification. In this study, we examined, using molecular methods and matrix-assisted laser desorption ioniazation-time of flight mass spectrometry (MALDI-TOF MS), the diversity of melanized fungi (MF) isolated from patients in 19 medical centers in India. Overall, during a 4-year period, 718 (5.3%) clinical specimens yielded MF. Of these, 72 (10%) isolates had clinical significance and were identified primarily by sequencing the internal transcribed spacer and large subunit (LSU) regions. MF represented 21 genera comprising 29 species, the majority of them belonging to the orders Pleosporales (50%) and Chaetothyriales (22%). Among the 29 fungal species identified in this study, only 6 (20%) species were identified by the MALDI-TOF MS due to the limited commercial database of Bruker Daltonics for MF. However, a 100% identification rate of 20 additional species identified in this study was obtained by constructing an in-house database using 24- to 96-h-old liquid cultures. Further, the CLSI broth microdilution method revealed low MICs for posaconazole (≤1 μg/ml) and voriconazole (≤2 μg/ml) in 96% and 95% of isolates, respectively. Skin/subcutaneous and sino-nasal and pulmonary phaeohyphomycosis due to MF were diagnosed in 21.4% (n = 15) and 28.5% (n = 20) of cases. Also, 10% of patients had central nervous system involvement (n = 7), and 3 cases of fungal osteomyelitis due to Cladophialophora bantiana and Corynespora spp. were observed.

MALDI IMS and Cancer Tissue Microarrays

Matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI IMS) technology creates a link between the molecular assessment of numerous molecules and the morphological information about their special distribution. The application of MALDI IMS on formalin-fixed paraffin-embedded (FFPE) tissue microarrays (TMAs) is suitable for large-scale discovery analyses. Data acquired from FFPE TMA cancer samples in current research are very promising, and applications for routine diagnostics are under development. With the current rapid advances in both technology and applications, MALDI IMS technology is expected to enter into routine diagnostics soon. This chapter is intended to be comprehensive with respect to all aspects and considerations for the application of MALDI IMS on FFPE cancer TMAs with in-depth notes on technical aspects.

Identification of Molds by Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry

Although to a lesser extent than diagnostic bacteriology, matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has recently revolutionized the diagnostic mycology workflow. With regard to filamentous fungi (or molds), the precise recognition of pathogenic species is important for rapid diagnosis and appropriate treatment, especially for invasive diseases. This review summarizes the current experience with MALDI-TOF MS-based identification of common and uncommon mold species of Aspergillus, Fusarium, Mucorales, dimorphic fungi, and dermatophytes. This experience clearly shows that MALDI-TOF MS holds promise as a fast and accurate identification tool, particularly with common species or typical strains of filamentous fungi.

MALDI-TOF-Based Dermatophyte Identification

MALDI-TOF MS has become increasingly popular for microorganism identification in the routine laboratory. Compared with conventional morphology-based techniques, MALDI-TOF is relatively inexpensive (per-unit identification), involves a rapid result turnaround time and yields more accurate results without the need for highly qualified staff. However, this technology has been technically difficult to implement for filamentous fungi identification. Identification of dermatophytes, a type of filamentous fungi, remains particularly challenging, partly due to the lack of clear species definition for some taxa or within some species complexes. Review of the ten studies published between 2008 and 2015 shows that the accuracy of MALDI-TOF MS-based identification varied between 13.5 and 100 % for dermatophytes. This variability was partly due to inconsistencies concerning critical steps of the routine clinical laboratory process. Use of both a complete formic acid-acetonitrile protein extraction step and a manufacturer library supplemented with homemade reference spectra is essential for an accurate species identification. This technique is conversely unaffected by variations in other routine clinical laboratory conditions such as culture medium type, incubation time and type of mass spectrometry instrument. Provided that a reference spectra library is adequate for dermatophyte identification, MALDI-TOF MS identification is more economical and offers an accuracy comparable to that of DNA sequencing. The technique also represents an advantageous alternative to the protracted and labor-intensive dermatophyte identification via macroscopic and microscopic morphology in the routine clinical laboratory.

Evaluation of matrix-assisted laser desorption/ionization time-of-fight mass spectrometry for identification of 345 clinical isolates of Aspergillus species from 11 Korean hospitals: comparison with molecular identification

We evaluated the ability of the Filamentous Fungi Library 1.0 of the MALDI-TOF MS Biotyper system to identify 345 clinical Aspergillus isolates from 11 Korean hospitals. Compared with results of the internal transcribed spacer region sequencing, the frequencies of correct identification at the species-complex level were 94.5% and 98.8% with cutoff values of 2.0 and 1.7, respectively. Compared with results of β-tubulin gene sequencing, the frequencies of correct identification at the species level were 96.0% (cutoff 2.0) and 100% (cutoff 1.7) for 303 Aspergillus isolates of five common, non-cryptic species, but only 4.8% (cutoff 1.7) and 0% (cutoff 2.0) for 42 Aspergillus isolates of six cryptic species (identifiable by β-tubulin or calmodulin sequencing). These results show that the MALDI Biotyper using the Filamentous Fungi Library version 1.0 enables reliable identification of the majority of common clinical Aspergillus isolates, although the database should be expanded to facilitate identification of cryptic species.

Reappraisal of Conventional Diagnosis for Dermatophytes

Dermatophytoses include a wide variety of diseases involving glabrous skin, nails and hair. These superficial infections are a common cause of consultation in dermatology. In many cases, their diagnosis is not clinically obvious, and mycological analysis therefore is required. Direct microscopic examination of the samples using clearing agents provides a quick response to the clinician and is usually combined with cultures on specific media, which must be used to overcome the growth of contaminating moulds that may hamper the recovery of dermatophytes. Accurate identification of the causative agent (i.e. at the species level), currently based on morphological criteria, is necessary not only to initiate an appropriate treatment but also for setting prophylactic measures. However, conventional methods often lack sensitivity and species identification may require up to 4 weeks if subcultures are needed. Histological analysis, which is considered the "gold standard" for the diagnosis of onychomycoses, is seldom performed, and as direct examination, it does not allow precise identification of the pathogen. Nevertheless, a particular attention to the quality of clinical specimens is warranted. Moreover, the sensitivity of direct examination may be greatly enhanced by the use of fluorochromes such as calcofluor white. Likewise, sensitivity of the cultures could be enhanced by the use of culture media containing antifungal deactivators. With the generalization of molecular identification by gene sequencing or MALDI-TOF mass spectrometry, the contribution of historical biochemical or physiological tests to species identification of atypical isolates is now limited. Nevertheless, despite the recent availability of several PCR-based kits and an extensive literature on molecular methods allowing the detection of fungal DNA or both detection and direct identification of the main dermatophyte species, the biological diagnosis of dermatophytosis in 2016 still relies on both direct examination and cultures of appropriate clinical specimens.