Antimicrobial and Antibiofilm Efficacy of Graphene Oxide against Chronic Wound Microorganisms

Ionic Liquid (1-Ethyl-3-methylimidazolium Acetate) Plasticization of Chitosan-Based Bionanocomposites

The structure and properties of different biopolymer composites based on chitosan and chitosan/carboxymethyl cellulose (CMC) are governed by multiple structure-property relationships associated with different phase interactions. Plasticization of these matrices with ionic liquid 1-ethyl-3-methylimidazolium acetate ([C₂mim][OAc]) played a dominant role, increasing the mobility of biopolymer chains as well as ions and associated dipoles but reducing biopolymer chain interactions, crystallinity, and thermal stability. These structural changes led to higher matrix ionic conductivity, shorter electrical relaxation time, and greater matrix ductility. The inclusion of graphene oxide (GO) and reduced GO (rGO) also influenced the structure and properties of these bionanocomposites by disrupting the biopolymer hydrogen bonding and/or polyelectrolyte complexation (PEC) and interacting with [C₂mim][OAc]. The impact of GO/rGO was more evident for 20 wt % [C₂mim][OAc], such as increased crystallinity and thermal stability of chitosan. PEC was hindered with excess (40 wt %) [C₂mim][OAc] added and further hindered again when rGO was included. This study shows that the structure and properties of bionanocomposites are not just determined by the surface chemistry of GO/rGO but can also be influenced by multiple interactions involving plasticizers such as ILs and additional biopolymers.

Anti-Angiogenic and Anti-Proliferative Graphene Oxide Nanosheets for Tumor Cell Therapy

Graphene oxide (GO) is a bidimensional novel material that exhibits high biocompatibility and angiogenic properties, mostly related to the intracellular formation of reactive oxygen species (ROS). In this work, we set up an experimental methodology for the fabrication of GO@peptide hybrids by the immobilization, via irreversible physical adsorption, of the Ac-(GHHPH)₄-NH₂ peptide sequence, known to mimic the anti-angiogenic domain of the histidine-proline-rich glycoprotein (HPRG). The anti-proliferative capability of the graphene-peptide hybrids were tested in vitro by viability assays on prostate cancer cells (PC-3 line), human neuroblastoma (SH-SY5Y), and human retinal endothelial cells (primary HREC). The anti-angiogenic response of the two cellular models of angiogenesis, namely endothelial and prostate cancer cells, was scrutinized by prostaglandin E2 (PGE₂) release and wound scratch assays, to correlate the activation of inflammatory response upon the cell treatments with the GO@peptide nanocomposites to the cell migration processes. Results showed that the GO@peptide nanoassemblies not only effectively induced toxicity in the prostate cancer cells, but also strongly blocked the cell migration and inhibited the prostaglandin-mediated inflammatory process both in PC-3 and in HRECs. Moreover, the cytotoxic mechanism and the internalization efficiency of the theranostic nanoplatforms, investigated by mitochondrial ROS production analyses and confocal microscopy imaging, unraveled a dose-dependent manifold mechanism of action performed by the hybrid nanoassemblies against the PC-3 cells, with the detection of the GO-characteristic cell wrapping and mitochondrial perturbation. The obtained results pointed out to the very promising potential of the synthetized graphene-based hybrids for cancer therapy.

Antibacterial Character of Cationic Polymers Attached to Carbon-Based Nanomaterials

The preparation of hybrid polymeric systems based on carbon derivatives with a cationic polymer is described. The polymer used is a copolymer of a quaternizable methacrylic monomer with another dopamine-based monomer capable of anchoring to carbon compounds. Graphene oxide and graphene as well as hybrid polymeric systems were widely characterized by infrared, Raman and photoemission X-ray spectroscopies, electron scanning microscopy, zeta potential and thermal degradation. These allowed confirming the attachment of copolymer onto carbonaceous materials. Besides, the antimicrobial activity of hybrid polymeric systems was tested against Gram positive Staphylococcus aureus and Staphylococcus epidermidis and Gram negative Escherichia coli and Pseudomonas aeruginosa bacteria. The results showed the antibacterial character of these hybrid systems.

Nanomedicine in Healing Chronic Wounds: Opportunities and Challenges

The poor healing associated with chronic wounds affects millions of people worldwide through high mortality rates and associated costs. Chronic wounds present three main problems: First, the absence of a suitable environment to facilitate cell migration, proliferation, and angiogenesis; second, bacterial infection; and third, unbalanced and prolonged inflammation. Unfortunately, current therapeutic approaches have not been able to overcome these main issues and, therefore, have limited clinical success. Over the past decade, incorporating the unique advantages of nanomedicine into wound healing approaches has yielded promising outcomes. Nanomedicine is capable of stimulating various cellular and molecular mechanisms involved in the wound microenvironment via antibacterial, anti-inflammatory, and angiogenetic effects, potentially reversing the wound microenvironment from nonhealing to healing. This review briefly discusses wound healing mechanisms and pathophysiology and then highlights recent findings regarding the opportunities and challenges of using nanomedicine in chronic wound management.

Structure and properties of thermomechanically processed chitosan/carboxymethyl cellulose/graphene oxide polyelectrolyte complexed bionanocomposites

Bionanocomposites of chitosan and chitosan/carboxymethyl cellulose (CMC) polyelectrolyte complexed materials with graphene oxide (GO) or reduced graphene oxide (rGO) were prepared by thermomechanical processing with excellent levels of dispersion. While GO has a greater affinity with the chitosan polycation, rGO had a more pronounced effect on properties resulting in increased tensile strength, Shore D hardness, and thermal stability of both matrices. Although GO is more hydrophilic than rGO, the former increased more effectively the surface hydrophobicity of the biocomposites regardless of matrix type. GO and rGO changed the α-transition of the biocomposites in a similar manner. The electrochemical properties of the biocomposites were influenced by both nanofiller type and matrix. This research revealed that inclusion of 2D carbon nanomaterials can alter biopolymer interactions and that the phase structure of the biopolymer blend may play a more important role than nanofiller-matrix interactions in determining the overall properties of these bionanocomposites.

Antimicrobial activity of multifaceted lactoferrin or graphene oxide functionalized silver nanocomposites biosynthesized using mushroom waste and chitosan

Hybrid nanoparticles designed to exert multiple mechanisms of antibacterial action offer a new approach to the fight against pathogenic resistant bacteria. In this study, nanomaterials with the dual actions of antibacterial and anti-biofilm activities were developed using silver nanoparticles (AgNPs) functionalized with either lactoferrin (LTF) or graphene oxide (GO). AgNPs were synthesized using mushroom waste as a reducing agent and chitosan (CS) as a stabilizing agent, prior to their surface functionalization with either GO (AgGO) or LTF (Ag-LTF). The AgNPs exhibited a surface plasmon resonance (SPR) band at 430 nm, as determined by UV-vis spectroscopy, whereas the absorption of AgGO and Ag-LTF occurred at 402 and 441 nm, respectively. Particle size analysis of AgNPs, AgGO, and Ag-LTF revealed sizes of 121.5 ± 10.5, 354.0 ± 1.6, and 130.8 ± 1.2 nm, respectively. All AgNPs, Ag-LTF, and AgGO inhibited selected Gram-positive bacteria and Gram-negative bacteria with comparable antibacterial performance, as determined by the agar diffusion method. Despite the absence of antibacterial activity by GO and LTF, a synergistic effect of AgGO and Ag-LTF was observed as they had a greater activity against P. aeruginosa. Moreover, Ag-LTF did not affect cell viability and migration rate of cells, suggesting the non-toxicity of Ag-LTF. In conclusion, AgNPs, Ag-LTF, and AgGO possess antibacterial activity, which may offer an alternative for future antibacterial agents.

Considerations and Caveats in Combating ESKAPE Pathogens against Nosocomial Infections

ESKAPE pathogens (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter species) are among the most common opportunistic pathogens in nosocomial infections. ESKAPE pathogens distinguish themselves from normal ones by developing a high level of antibiotic resistance that involves multiple mechanisms. Contemporary therapeutic strategies which are potential options in combating ESKAPE bacteria need further investigation. Herein, a broad overview of the antimicrobial research on ESKAPE pathogens over the past five years is provided with prospective clinical applications.

Structure-Property-Toxicity Relationships of Graphene Oxide: Role of Surface Chemistry on the Mechanisms of Interaction with Bacteria

Graphene oxide (GO) is an antimicrobial agent with tunable surface chemistry. To identify the physicochemical determinants of GO's antimicrobial activity, we generated different modified Hummer's GO materials thermally annealed at 200, 500, or 800 °C (TGO200, TGO500, and TGO800, respectively) to modify the surface oxygen groups on the material. Plating assays show that as-received GO (ARGO) and TGO200, TGO500, and TGO800 reduce Escherichia coli viability by 50% (EC₅₀) at 183, 143, 127, and 86 μg/mL, respectively, indicating higher bacterial toxicity as ARGO is reduced. To uncover the toxicity mechanism of GO, fluorescent dye-based assays were used to measure oxidative stress at the EC₅₀. ARGO showed an increase in intracellular reactive oxygen species, measured as an increase in 2',7'-dichlorodihydrofluorescein diacetate fluorescence, whereas TGO500 and TGO800 induced an increase in the fluorescence of fluorescein diacetate (FDA) by 30 and 42%, suggesting a decrease in cell permeability. Because of a possible wrapping mechanism, plating assays after post-exposure sonication were performed to explain TGO's low oxidative response and high FDA levels. Results show no difference in colony-forming units, indicating that inhibition of cell growth is a result of the adsorption of bacterial cells on the GO material. By comparing different GO samples at their EC₅₀, this study reveals that reduction of GO alters both the mechanisms of cellular interaction and the degree of toxicity to bacteria.

Anti-biofilm investigation of graphene/chitosan nanocomposites against biofilm producing P. aeruginosa and K. pneumoniae

In this study graphene/chitosan nanoparticles (GR/CS NCs) were developed. The homogenous combination of GR and CS was confirmed by FTIR spectroscopy. The combination of CS with GR sheets reduced the XRD intensity of the GR peak in GR/CS NCs, while TEM images revealed the immobile CS coating of GR sheets. Further, the anti-biofilm activity of GR/CS NCs was tested. The tests showed that the formation of biofilm by Pseudomonas aeruginosa and Klebsiella pneumoniae was inhibited at 40□g/mL GR/CS NCs up to 94 and 92 %, respectively. The intracellular and cell surface damage of the bacteria was observed by CLSM and SEM. Also, GR/CS NCs produced a toxic effect of 90 % on Artemia franciscana at 70□g/mL upon 24 h incubation. The recorded properties of the synthesized GR/CS NCs qualify them as potential agents against multi-drug resistant bacteria.

Photoexcitation triggering via semiconductor Graphene Quantum Dots by photochemical doping with Curcumin versus perio-pathogens mixed biofilms

BACKGROUND

Recently, antimicrobial photodynamic therapy (aPDT) as an alternative treatment modality has been used adjunctively in the treatment of periodontitis and peri-implantitis. Photosensitizing agents in the form of nanoparticles have been designed for improving the efficiency of aPTD. Graphene quantum dots are a special type of nanocrystals that can promote aPDT when coupled with curcumin (Cur). The main objective of the present study was to investigate the effects of photoexcited GQD-Cur on the metabolic activity of perio-pathogen mixed biofilms.

MATERIALS AND METHODS

GQD-Cur was synthesized and characterized by scanning electron microscopy (SEM), dynamic light scattering (DLS), fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible spectrometry (UV-Vis), and X-ray diffraction (XRD). The cell cytotoxicity effect of GQD-Cur was evaluated on primary human gingival fibroblast (HuGu) cells. Perio-pathogen mixed biofilms including Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, and Prevotella intermedia photosensitized with GQD doped with Cur were irradiated with a blue LED at a wavelength of 435 ± 20 nm for 1 min, and then bacterial viability measurements were performed. The antimicrobial susceptibility profile, biofilm formation ability, amount of reactive oxygen species (ROS) released, and variations of gene expressions involved in biofilm formation were assessed.

RESULTS

The SEM, DLS, FTIR, UV-Vis spectrometry, and XRD pattern confirmed that GQD-Cur was synthesized successfully. According to the results, GQD-Cur exhibited no cytotoxicity against HuGu cells. Photoexcited GQD-Cur resulted in a significant reduction in cell viability (93%) and biofilm formation capacity (76%) of peri-pathogens compared to the control group (P < 0.05). According to the results, a significant concentration-dependent increase in the ROS generation was observed in perio-pathogens mixed cells treated with different doses of GQD-Cur-aPDT. Moreover, rcpA, fimA, and inpA gene expression profiles were downregulated by 8.1-, 9.6-, and 11.8-folds, respectively.

CONCLUSIONS

Based on the results, photoexcited GQD-Cur have a high potency of perio-pathogens suppression in planktonic and biofilm forms and downregulation of the biofilm genes expression pattern was exploited as a nanoscale-based platform for periodontitis.

Development of an antibacterial nanobiomaterial for wound-care based on the absorption of AgNPs on the eggshell membrane

To develop a promising antibacterial agent for wound-care dressing, a series of silver nanoparticles (AgNPs) and eggshell membrane (ESM) composites (AgNPs/ESM) were prepared. AgNPs were prepared using a chemical reduction method and their characteristics were determined. Various pH and processing time combinations were tested to find the optimal conditions for preparing AgNPs/ESM composites. To obtain the optimal nontoxic-level silver release, the AgNPs stock solution was diluted to 2 times, 4 times, 6 times, 8 times and 10 times with water and the concentration of silver released by the composites was also tested. All the prepared composites showed antibacterial activity, but the activity was the strongest when the stock AgNPs solution was diluted to four times (a concentration of silver was 2.41 mg/L). The addition of AgNPs changed the ESM from hydrophobic to hydrophilic by lowering the water contact angles from 105° to 75°, which is important for the wound-healing process. And the AgNPs/ESM composites had a higher surface area (159.08 m²/g) than the natural ESM (24.32 m²/g) and a suitable pore size (10.92 nm) as well, endowing with better absorption and antibacterial abilities. These findings suggested that the AgNPs/ESM composites are promising candidates for the development of antimicrobial agent for biomedical devices and therapeutic applications, such as wound-healing agent.

Graphene-based nanomaterials: the promising active agents for antibiotics-independent antibacterial applications

Graphene-based nanomaterials, such as graphene oxide (GO) and reduced graphene oxide (rGO), have shown great potentials in drug delivery and photodynamic/photothermal therapy due to their featured structure and physicochemical properties. In recent years, their antibacterial potentials have also been exploited. The commonly recognized antibacterial mechanisms include sharp edge-mediated cutting effect, oxidative stress and cell entrapment. This antibacterial activity is very important for human health. As we know, infection with the pathogenic bacteria, especially the drug-resistant ones, is a great threat to human lives. Thus, the development of the antibiotics-independent and drug-free antibacterial agents is of great importance and significance. Graphene-based nanomaterials are a kind of such antibacterial agents. An insight into their properties and antibacterial mechanisms is necessary before they are developed into real products. Herein, we provide a comprehensive understanding of the antibacterial application of graphene-based nanomaterials via summarizing their antibacterial activities against some typical microbial species and discussing their unique mechanisms. In addition, the side-effects and problems in using these nanomaterials are also discussed.

Sodium carboxymethyl cellulose hydrogels containing reduced graphene oxide (rGO) as a functional antibiofilm wound dressing

Biofilms comprise bacteria attached to wound surfaces and are major contributors to non-healing wounds. It was found that the increased resistance of biofilms to antibiotics allows wound infections to persist chronically in spite of antibiotic therapy. In this study, the reduced form of graphene oxide (rGO) was explored as plausible antibiofilm agents. The rGO was synthesized via reducing the functional groups of GO. Then, rGO were characterized using zetasizer, X-ray photoelectron spectroscopy, UV-Vis spectroscopy and FESEM. The rGO were then formulated into sodium carboxymethyl cellulose (NaCMC) hydrogels to form rGO hydrogel and tested for antibiofilm activities in vitro using XTT test, and in vivo biofilm formation assay using nematodes C. elegans. Reduced GO hydrogel was successfully formed by reducing the functional groups of GO, and a reduction of up to 95% of functional groups was confirmed with X-ray photoelectron spectroscopy analysis. XTT tests confirmed that rGO hydrogels reduced biofilm formation by S. aureus (81-84%) and P. aeruginosa (50-62%). Fluorescence intensity also confirmed that rGO hydrogel can inhibit biofilm bacteria in C. elegans experiments. This study implied that rGO hydrogel is an effective antibiofilm agent for infected wounds.

Engineered nanomaterials for water decontamination and purification: From lab to products

Clean water is vital for life; it is required not only for drinking but also for the preparation of food and proper hygiene. Unfortunately, more than fifty percent of the world population mainly in China and India face a severe scarcity of water. Around 1.8 billion people inevitably drink water from sources having fecal contamination resulting in the death of about a million children every year. Scientists are developing various economic technologies to decontaminate and purify water. Nanomaterials-based technology offers an economic and effective alternative for water purification and decontamination. As nanomaterials are available globally, have remarkable antimicrobial activity and the ability to effectively remove organic and inorganic pollutants from water. This review discusses the potential role of nanomaterials in the purification of drinking water. As nanomaterials exhibit remarkable antimicrobial and antiparasitic activities against waterborne pathogens and parasites of primary concern like Shigella dysenteriae, Vibrio cholera, and Entamoeba histolytica. Nanomaterials also demonstrate the ability to absorb toxic chemicals like mercury and dyes from polluted water. However, for successful commercialization of the technology, some inherent bottlenecks need to be addressed adequately. These include nanoparticles aggregation, their seepage into drinking water and adverse effects on human health and the environment. Nanocomposites are being developed to overcome these problems and to combine two or more desirable properties for water purification. Widespread and large-scale use of nanomaterials for water purification soon may become a reality. Products containing nanomaterials such as Karofi, Lifestraw, and Tupperware for water purification are already available in the market.

Comprehensive Application of Graphene: Emphasis on Biomedical Concerns

Graphene, sp² hybridized carbon framework of one atom thickness, is reputed as the strongest material to date. It has marked its impact in manifold applications including electronics, sensors, composites, and catalysis. Current state-of-the-art graphene research revolves around its biomedical applications. The two-dimensional (2D) planar structure of graphene provides a large surface area for loading drugs/biomolecules and the possibility of conjugating fluorescent dyes for bioimaging. The high near-infrared absorbance makes graphene ideal for photothermal therapy. Henceforth, graphene turns out to be a reliable multifunctional material for use in diagnosis and treatment. It exhibits antibacterial property by directly interacting with the cell membrane. Potential application of graphene as a scaffold for the attachment and proliferation of stem cells and neuronal cells is captivating in a tissue regeneration scenario. Fabrication of 2D graphene into a 3D structure is made possible with the help of 3D printing, a revolutionary technology having promising applications in tissue and organ engineering. However, apart from its advantageous application scope, use of graphene raises toxicity concerns. Several reports have confirmed the potential toxicity of graphene and its derivatives, and the inconsistency may be due to the lack of standardized consensus protocols. The present review focuses on the hidden facts of graphene and its biomedical application, with special emphasis on drug delivery, biosensing, bioimaging, antibacterial, tissue engineering, and 3D printing applications.

Minocycline hydrochloride loaded graphene oxide enables enhanced osteogenic activity in the presence of Gram-positive bacteria, Staphylococcus aureus

Minocycline hydrochloride loaded graphene oxide films offer a solution for the issues of insufficient osseointegration and bacterial infections on the implants.

Chemical fabrication of graphene oxide nanosheets attenuates biofilm formation of human clinical pathogens

Graphene oxide (GO) has been recently attracted considerable interest for its potential applications in physical, chemical and biological properties. In the present study, the GO nanosheets were prepared by a chemical exfoliation technique using a modified Hummers method. Initially, the prepared GO nanosheets were confirmed by UV-vis spectroscopy and further characterized by FE-SEM, Edax, HR-TEM and SAED that demonstrated the formation of GO nanosheets with few layers flat sheet structure with hexagonal lattice crystalline nature. The FTIR spectra revealed the presence of various oxygen containing functional groups has been produced from graphite plane by exfoliation technique. The prepared GO nanosheets showed excellent antibiotic resistant activity against planktonic bacteria and more effective to damage the established biofilms and inhibits the biofilm formation of human clinical pathogens like E. coli and P. aeruginosa. Further, the GO nanosheets were found to be non-toxic to normal mammalian cells and there are no apparent morphological changes were observed in control and treated cells. In conclusion, GO nanosheets were effectively preventing the formation of biofilms and kills the represent bacteria that suggested the GO nanosheets could be used for the prevention and treatment of biofilm-related infections.

A Mini Review Focused on the Recent Applications of Graphene Oxide in Stem Cell Growth and Differentiation

Stem cells are undifferentiated cells that can give rise to any types of cells in our body. Hence, they have been utilized for various applications, such as drug testing and disease modeling. However, for the successful of those applications, the survival and differentiation of stem cells into specialized lineages should be well controlled. Growth factors and chemical agents are the most common signals to promote the proliferation and differentiation of stem cells. However, those approaches holds several drawbacks such as the negative side effects, degradation or denaturation, and expensive. To address such limitations, nanomaterials have been recently used as a better approach for controlling stem cells behaviors. Graphene oxide is the derivative of graphene, the first two-dimensional (2D) materials in the world. Recently, due to its extraordinary properties and great biological effects on stem cells, many scientists around the world have utilized graphene oxide to enhance the differentiation potential of stem cells. In this mini review, we highlight the key advances about the effects of graphene oxide on controlling stem cell growth and various types of stem cell differentiation. We also discuss the possible molecular mechanisms of graphene oxide in controlling stem cell growth and differentiation.