Multidomain architecture of beta-glycosyl transferases: implications for mechanism of action

Characterization of free exopolysaccharides secreted by Mycoplasma mycoides subsp. mycoides

Contagious bovine pleuropneumonia is a severe respiratory disease of cattle that is caused by a bacterium of the Mycoplasma genus, namely Mycoplasma mycoides subsp. mycoides (Mmm). In the absence of classical virulence determinants, the pathogenicity of Mmm is thought to rely on intrinsic metabolic functions and specific components of the outer cell surface. One of these latter, the capsular polysaccharide galactan has been notably demonstrated to play a role in Mmm persistence and dissemination. The free exopolysaccharides (EPS), also produced by Mmm and shown to circulate in the blood stream of infected cattle, have received little attention so far. Indeed, their characterization has been hindered by the presence of polysaccharide contaminants in the complex mycoplasma culture medium. In this study, we developed a method to produce large quantities of EPS by transfer of mycoplasma cells from their complex broth to a chemically defined medium and subsequent purification. NMR analyses revealed that the purified, free EPS had an identical β(1−>6)-galactofuranosyl structure to that of capsular galactan. We then analyzed intraclonal Mmm variants that produce opaque/translucent colonies on agar. First, we demonstrated that colony opacity was related to the production of a capsule, as observed by electron microscopy. We then compared the EPS extracts and showed that the non-capsulated, translucent colony variants produced higher amounts of free EPS than the capsulated, opaque colony variants. This phenotypic variation was associated with an antigenic variation of a specific glucose phosphotransferase permease. Finally, we conducted in silico analyses of candidate polysaccharide biosynthetic pathways in order to decipher the potential link between glucose phosphotransferase permease activity and attachment/release of galactan. The co-existence of variants producing alternative forms of galactan (capsular versus free extracellular galactan) and associated with an antigenic switch constitutes a finely tuned mechanism that may be involved in virulence.

Characterization of a trifunctional glucosyltransferase essential for Moraxella catarrhalis lipooligosaccharide assembly

The human respiratory tract pathogen Moraxella catarrhalis expresses lipooligosaccharides (LOS), glycolipid surface moieties that are associated with enhanced colonization and virulence. Recent studies have delineated the major steps required for the biosynthesis and assembly of the M. catarrhalis LOS molecule. We previously demonstrated that the glucosyltransferase enzyme Lgt3 is responsible for the addition of at least one glucose (Glc) molecule, at the β-(1-4) position, to the inner core of the LOS molecule. Our data further suggested a potential multifunctional role for Lgt3 in LOS biosynthesis. The studies reported here demonstrate that the Lgt3 enzyme possesses two glycosyltransferase domains (A1 and A2) similar to that of other bifunctional glycosyltransferase enzymes involved in surface polysaccharide biosynthesis in Escherichia coli, Pasteurella multocida and Streptococcus pyogenes. Each Lgt3 domain contains a conserved DXD motif, shown to be involved in the catalytic activity of other glycosyltransferases. To determine the function of each domain, A1 (N-terminal), A2 (C-terminal) and double A1A2 site-directed DAD to AAA mutants were constructed and the resulting LOS phenotypes of these modified strains were analyzed. Our studies indicate that the Lgt3 N-terminal A1 catalytic domain is responsible for the addition of the first β-(1-3) Glc to the first Glc on the inner core. The C-terminal catalytic domain A2 then adds the β-(1-4) Glc and the β-(1-6) Glc, confirming the bifunctional nature of this domain. The results from these experiments demonstrate that Lgt3 is a novel, multifunctional transferase responsible for the addition of three Glcs with differing linkages onto the inner core of M. catarrhalis LOS.

Genomic analysis by deep sequencing of the probiotic Lactobacillus brevis KB290 harboring nine plasmids reveals genomic stability

We determined the complete genome sequence of Lactobacillus brevis KB290, a probiotic lactic acid bacterium isolated from a traditional Japanese fermented vegetable. The genome contained a 2,395,134-bp chromosome that housed 2,391 protein-coding genes and nine plasmids that together accounted for 191 protein-coding genes. KB290 contained no virulence factor genes, and several genes related to presumptive cell wall-associated polysaccharide biosynthesis and the stress response were present in L. brevis KB290 but not in the closely related L. brevis ATCC 367. Plasmid-curing experiments revealed that the presence of plasmid pKB290-1 was essential for the strain's gastrointestinal tract tolerance and tendency to aggregate. Using next-generation deep sequencing of current and 18-year-old stock strains to detect low frequency variants, we evaluated genome stability. Deep sequencing of four periodic KB290 culture stocks with more than 1,000-fold coverage revealed 3 mutation sites and 37 minority variation sites, indicating long-term stability and providing a useful method for assessing the stability of industrial bacteria at the nucleotide level.

N-glycan maturation is crucial for cytokinin-mediated development and cellulose synthesis in Oryza sativa

To explore the physiological significance of N-glycan maturation in the plant Golgi apparatus, gnt1, a mutant with loss of N-acetylglucosaminyltransferase I (GnTI) function, was isolated in Oryza sativa. gnt1 exhibited complete inhibition of N-glycan maturation and accumulated high-mannose N-glycans. Phenotypic analyses revealed that gnt1 shows defective post-seedling development and incomplete cell wall biosynthesis, leading to symptoms such as failure in tiller formation, brittle leaves, reduced cell wall thickness, and decreased cellulose content. The developmental defects of gnt1 ultimately resulted in early lethality without transition to the reproductive stage. However, callus induced from gnt1 seeds could be maintained for periods, although it exhibited a low proliferation rate, small size, and hypersensitivity to salt stress. Shoot regeneration and dark-induced leaf senescence assays indicated that the loss of GnTI function results in reduced sensitivity to cytokinin in rice. Reduced expression of A-type O. sativa response regulators that are rapidly induced by cytokinins in gnt1 confirmed that cytokinin signaling is impaired in the mutant. These results strongly support the proposed involvement of N-glycan maturation in transport as well as in the function of membrane proteins that are synthesized via the endomembrane system.

Processing of cellulose synthase (AcsAB) from Gluconacetobacter hansenii 23769

The cellulose synthase protein (AcsAB) is encoded by a single gene in Gluconacetobacter hansenii ATCC 23769. We have examined the processing pattern of this enzyme and the localization of the cleavage products by heterologously expressing the truncated portions of the AcsAB protein and using specific antibodies generated against these regions. We found that the AcsAB protein is processed into three polypeptide subunits of molecular masses 46kDa, 34kDa and 95kDa. The 46kDa polypeptide (AcsA(cat)) harbors the conserved glycosyltransferase domain and hence contains the catalytic subunit of the enzyme. This polypeptide is localized in the cytoplasmic membrane. The 34kDa polypeptide (AcsA(reg)) is the regulatory subunit with the cyclic diGMP-binding PilZ domain. This polypeptide is largely cytoplasmic. The 95kDa subunit (AcsB) is of unknown function and contains a predicted signal peptide at its N-terminus. This subunit is localized in the outer membrane. In addition to this, we have also localized the AcsC protein in the outer membrane, confirming its predicted localization based on the OM-signal sequence at its N-terminus.

Architecture and biosynthesis of the Saccharomyces cerevisiae cell wall

The wall gives a Saccharomyces cerevisiae cell its osmotic integrity; defines cell shape during budding growth, mating, sporulation, and pseudohypha formation; and presents adhesive glycoproteins to other yeast cells. The wall consists of β1,3- and β1,6-glucans, a small amount of chitin, and many different proteins that may bear N- and O-linked glycans and a glycolipid anchor. These components become cross-linked in various ways to form higher-order complexes. Wall composition and degree of cross-linking vary during growth and development and change in response to cell wall stress. This article reviews wall biogenesis in vegetative cells, covering the structure of wall components and how they are cross-linked; the biosynthesis of N- and O-linked glycans, glycosylphosphatidylinositol membrane anchors, β1,3- and β1,6-linked glucans, and chitin; the reactions that cross-link wall components; and the possible functions of enzymatic and nonenzymatic cell wall proteins.

Synthase-dependent exopolysaccharide secretion in Gram-negative bacteria

The biosynthesis and export of bacterial cell-surface polysaccharides is known to occur through several distinct mechanisms. Recent advances in the biochemistry and structural biology of several proteins in synthase-dependent polysaccharide secretion systems have identified key conserved components of this pathway in Gram-negative bacteria. These components include an inner-membrane-embedded polysaccharide synthase, a periplasmic tetratricopeptide repeat (TPR)-containing scaffold protein, and an outer-membrane β-barrel porin. There is also increasing evidence that many synthase-dependent systems are post-translationally regulated by the bacterial second messenger bis-(3'-5')-cyclic dimeric guanosine monophosphate (c-di-GMP). Here, we compare these core proteins in the context of the alginate, cellulose, and poly-β-D-N-acetylglucosamine (PNAG) secretion systems.

Xyloglucan xylosyltransferases XXT1, XXT2, and XXT5 and the glucan synthase CSLC4 form Golgi-localized multiprotein complexes

Xyloglucan is the major hemicellulosic polysaccharide in the primary cell walls of most vascular dicotyledonous plants and has important structural and physiological functions in plant growth and development. In Arabidopsis (Arabidopsis thaliana), the 1,4-β-glucan synthase, Cellulose Synthase-Like C4 (CSLC4), and three xylosyltransferases, XXT1, XXT2, and XXT5, act in the Golgi to form the xylosylated glucan backbone during xyloglucan biosynthesis. However, the functional organization of these enzymes in the Golgi membrane is currently unknown. In this study, we used bimolecular fluorescence complementation and in vitro pull-down assays to investigate the supramolecular organization of the CSLC4, XXT1, XXT2, and XXT5 proteins in Arabidopsis protoplasts. Quantification of bimolecular fluorescence complementation fluorescence by flow cytometry allowed us to perform competition assays that demonstrated the high probability of protein-protein complex formation in vivo and revealed differences in the abilities of these proteins to form multiprotein complexes. Results of in vitro pull-down assays using recombinant proteins confirmed that the physical interactions among XXTs occur through their catalytic domains. Additionally, coimmunoprecipitation of XXT2YFP and XXT5HA proteins from Arabidopsis protoplasts indicated that while the formation of the XXT2-XXT2 homocomplex involves disulfide bonds, the formation of the XXT2-XXT5 heterocomplex does not involve covalent interactions. The combined data allow us to propose that the proteins involved in xyloglucan biosynthesis function in a multiprotein complex composed of at least two homocomplexes, CSLC4-CSLC4 and XXT2-XXT2, and three heterocomplexes, XXT2-XXT5, XXT1-XXT2, and XXT5-CSLC4.

A processive carbohydrate polymerase that mediates bifunctional catalysis using a single active site

Even in the absence of a template, glycosyltransferases can catalyze the synthesis of carbohydrate polymers of specific sequence. The paradigm has been that one enzyme catalyzes the formation of one type of glycosidic linkage, yet certain glycosyltransferases generate polysaccharide sequences composed of two distinct linkage types. In principle, bifunctional glycosyltransferases can possess separate active sites for each catalytic activity or one active site with dual activities. We encountered the fundamental question of one or two distinct active sites in our investigation of the galactosyltransferase GlfT2. GlfT2 catalyzes the formation of mycobacterial galactan, a critical cell-wall polymer composed of galactofuranose residues connected with alternating, regioisomeric linkages. We found that GlfT2 mediates galactan polymerization using only one active site that manifests dual regioselectivity. Structural modeling of the bifunctional glycosyltransferases hyaluronan synthase and cellulose synthase suggests that these enzymes also generate multiple glycosidic linkages using a single active site. These results highlight the versatility of glycosyltransferases for generating polysaccharides of specific sequence. We postulate that a hallmark of processive elongation of a carbohydrate polymer by a bifunctional enzyme is that one active site can give rise to two separate types of glycosidic bonds.

Biosynthesis of non-cellulosic polysaccharides of plant cell walls

Enzymes that make the polymer backbones of plant cell wall polysaccharides have proven to be recalcitrant to biochemical purification. Availability of mutational genetics and genomic tools paved the way for rapid progress in identifying genes encoding various cell wall glycan synthases. Mutational genetics, the primary tool used in unraveling cellulose biosynthesis, was ineffective in assigning function to any of the hemicellulosic, polymerizing glycan synthases. A combination of comparative genomics and functional expression in a heterologous system allowed identification of various cellulose synthase-like (Csl) sequences as being involved in the formation of β-1,4-mannan, β-1,4-glucan, and mixed-linked glucan. A number of xylose-deficient mutants have led to a variety of genes, none of which thus far possesses the motifs known to be conserved among polymerizing β-glycan synthases. Except for xylan synthase, which appears to be an agglomerate of proteins just like cellulose synthase, Golgi glycan synthases already identified suggest that the catalytic polypeptide by itself is sufficient for enzyme activity, most likely as a homodimer. Several of the Csl genes remain to be assigned a function. The possibility of the involvement of various Csl genes in making more than one product remains.

Saccharomyces cerevisiae chitin biosynthesis activation by N-acetylchitooses depends on size and structure of chito-oligosaccharides

Background

To explore chitin synthesis initiation, the effect of addition of exogenous oligosaccharides on in vitro chitin synthesis was studied. Oligosaccharides of various natures and lengths were added to a chitin synthase assay performed on a Saccharomyces cerevisiae membrane fraction.

Findings

N-acetylchito-tetra, -penta and -octaoses resulted in 11 to 25% [¹⁴C]-GlcNAc incorporation into [¹⁴C]-chitin, corresponding to an increase in the initial velocity. The activation appeared specific to N-acetylchitooses as it was not observed with oligosaccharides in other series, such as beta-(1,4), beta-(1,3) or alpha-(1,6) glucooligosaccharides.

Conclusions

The effect induced by the N-acetylchitooses was a saturable phenomenon and did not interfere with free GlcNAc and trypsin which are two known activators of yeast chitin synthase activity in vitro. The magnitude of the activation was dependent on both oligosaccharide concentration and oligosaccharide size.

Extraction of cellulose-synthesizing activity of Gluconacetobacter xylinus by alkylmaltoside

This study reinvestigated the synthesis of cellulose in vitro with a well-known cellulose-producing bacterium, Gluconacetobacter xylinus. Alkylmaltoside detergents, which are more frequently used in recent structural biological researches, are uniquely used in this study to solubilize cellulose-synthesizing activity from the cell membrane of G. xylinus. Activity comparable to that previously reported is obtained, while the synthesized cellulose is crystallized into a non-native polymorph of cellulose (cellulose II) as well as the previous studies. In spite of this failure to recover the native activity to synthesize cellulose I microfibril in vitro, the product is a polymer with a degree of polymerization greater than 45 as determined by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). It was thus concluded that the established protocol can solubilize cellulose-synthesizing activity of G. xylinus with polymerizing activity.

Monitoring processivity and length control of a carbohydrate polymerase

Carbohydrate polymerases are abundant in nature. Although they play vital physiological roles, the molecular mechanisms that they use for the controlled assembly of polymers are largely unknown. One fundamental issue is whether an enzyme utilizes a processive or distributive mechanism for chain elongation. The shortage of mechanistic information on polysaccharide-generating glycosyltransferases became apparent when we sought to carry out investigations of GlfT2, a glycosyltransferase essential for cell wall biosynthesis in Mycobacterium tuberculosis. GlfT2 catalyzes the formation of the cell wall galactan, which is a linear polysaccharide consisting of 20-40 repeating d-galactofuranose (Galf) residues. Recombinant GlfT2 can act on synthetic acceptors to produce polymers with lengths similar to those of endogenous galactan, indicating that GlfT2 has an intrinsic ability to control polymer length. To address whether GlfT2 utilizes a processive or distributive mechanism, we developed a mass spectrometry assay. Our approach, which relies on acceptors labeled with stable isotopes, provides direct evidence that GlfT2 is a processive polymerase that maintains contact with the glycan substrate through successive monomer additions. Given this finding, we probed further the catalytic mechanism of GlfT2 to address the basis of an observed kinetic lag phase. These studies suggest that GlfT2 possesses subsites for Galf residue binding and that substrates that can fill these subsites undergo efficient processive polymerization. The presence of these subsites and the kinetic lag phase are common features of processive enzymes. We anticipate that the strategies described herein can be applied to mechanistic studies of other carbohydrate polymerization reactions.

Scanning and negative-staining electron microscopy of protoplast regeneration of a wild-type and two chitin synthase mutants in the pathogenic yeast Candida glabrata

Protoplast regeneration of a wild-type and two mutant strains of Candida glabrata defective in CHS3 homologues encoding class IV chitin synthase in Saccharomyces cerevisiae was examined by scanning and negative-staining electron microscopy. In the wild-type strain, small particles and short filaments appeared on the protoplast surface at 10 min, filamentous materials covered the entire surface of the protoplast at 1 h, granular materials started filling interspaces of filamentous materials at 2 h and regeneration was completed at 6 h. The filamentous materials consisted of microfibrils of various widths ranging from ≤5 to 40 nm, and composed of β-glucan. Protoplasts of the two chitin synthase mutant strains of Δchs3A and Δchs3B completed regeneration essentially by the same process as wild-type strain, although it took more time. These results suggest that CHS3A and CHS3B genes may have important roles in cell wall formation during protoplast regeneration, but can be compensated by other cell wall enzymes.

Arabidopsis mannan synthase CSLA9 and glucan synthase CSLC4 have opposite orientations in the Golgi membrane

Several proteins encoded by the cellulose synthase-like (CSL) gene family are known to be processive glycan synthases involved in the synthesis of cell-wall polysaccharides. These include CSLA proteins, which synthesize β-(1→4)-linked mannans found in the walls of many plant species, and CSLC proteins, which are thought to synthesize the β-(1→4)-linked glucan backbone of xyloglucan, an abundant polysaccharide in the primary walls of many plants. CSLA and CSLC proteins are predicted to have multiple membrane spans, and their products (mannan and xyloglucan) accumulate in the Golgi lumen. Knowing where these proteins are located in the cell and how they are orientated in the membrane is important for understanding many aspects of mannan and xyloglucan biosynthesis. In this study, we investigate the subcellular localization and membrane protein topology of CSLA9 and CSLC4, the members of these two families that are most highly expressed in Arabidopsis. CSLA9 and CSLC4 are found predominantly in Golgi membranes, based on co-localization with the known ER/Golgi marker ERD2-YFP. The topology of epitope-tagged proteins was examined using protease protection experiments. Experiments were designed to determine the positions of both the protein termini and the active loop of the CSL proteins investigated. The topology of CSLA9 is characterized by an odd number of transmembrane domains (probably five) and an active site that faces the Golgi lumen. In contrast, CSLC4 has an even number of transmembrane domains (probably six) and an active site that faces the cytosol. The implications of these topologies on various aspects of hemicellulose biosynthesis are discussed.

Analysis of the cellulose synthase genes associated with primary cell wall synthesis in Bambusa oldhamii

The synthesis of cell wall polysaccharides is highly active in rapidly growing bamboo shoots. We cloned a set of BoCesA cDNAs that encode cellulose synthase from bamboo (Bambusa oldhamii) and investigated the expression patterns of the BoCesA2, BoCesA5, BoCesA6 and BoCesA7 genes. The four BoCesA genes were differentially expressed in the different parts of growing bamboo shoots, in various organs, and in multiple shoots that were cultured in vitro. They were down-regulated by alpha-naphthaleneacetic acid and differentially affected by thidiazuron in the multiple shoots. In situ RT-PCR analyses demonstrated that BoCesA2, BoCesA5, BoCesA6, and BoCesA7 mRNAs were present throughout the base and the internode regions of the etiolated shoots that emerged from pseudorhizomes, and in the internode regions of the juvenile branch shoots that emerged from nodes of mature bamboo culms; however, the expression of the four genes in the lignified internode of the branch shoot was predominantly detected in the center of the vascular bundles. Our results for cDNA cloning, expression analyses, and phylogenetic analysis suggest that the 10 BoCesA genes cloned from the etiolated bamboo shoots participate in cellulose synthesis in the primary cell walls of the growing bamboo, and that at least three additional BoCesA genes involved in cellulose synthesis in the secondary walls may be present in the bamboo genome. The expressions of BoCesA genes may be under fine control in response to the various developmental stages and physiological conditions of bamboo.

Structural and functional divergence of the newly identified GtrIc from its Gtr family of conserved Shigella flexneri serotype-converting glucosyltransferases

Glucosyltransferases (Gtrs) and O-acetyltransferase (Oac) are integral membrane proteins embedded within the cytoplasmic membrane of Shigella flexneri. Gtrs and Oac are responsible for unidirectional host serotype conversion by altering the epitopic properties of the bacterial surface lipopolysaccharide (LPS) O-antigen. In this study, we present the membrane topology of a recently recognized Gtr, GtrIc, which is known to mediate S. flenxeri serotype switching from 1a to 1c. The GtrIc topology is shown to deviate from those typically seen in S. flexneri Gtrs. GtrIc has 11 hydrophilic loops, 10 transmembrane helices, a double intramembrane dipping loop 5, and a cytoplasmic N- and C-terminus. Along with a unique membrane topology, the identification of non-critical Gtr-conserved peptide motifs within large periplasmic loops (N-terminal D/ExD/E and C-terminal KK), which have previously been proven essential for the activity of other Gtrs, challenge current opinions of a similar mechanism for enzyme function between members of the S. flexneri Gtr family.

Identification of residues important for the activity of Haloferax volcanii AglD, a component of the archaeal N-glycosylation pathway

In Haloferax volcanii, AglD adds the final hexose to the N-linked pentasaccharide decorating the S-layer glycoprotein. Not knowing the natural substrate of the glycosyltransferase, together with the challenge of designing assays compatible with hypersalinity, has frustrated efforts at biochemical characterization of AglD activity. To circumvent these obstacles, an in vivo assay designed to identify amino acid residues important for AglD activity is described. In the assay, restoration of AglD function in an Hfx. volcanii aglD deletion strain transformed to express plasmid-encoded versions of AglD, generated through site-directed mutagenesis at positions encoding residues conserved in archaeal homologues of AglD, is reflected in the behavior of a readily detectable reporter of N-glycosylation. As such Asp110 and Asp112 were designated as elements of the DXD motif of AglD, a motif that interacts with metal cations associated with nucleotide-activated sugar donors, while Asp201 was predicted to be the catalytic base of the enzyme.

What do we really know about cellulose biosynthesis in higher plants?

Cellulose biosynthesis is one of the most important biochemical processes in plant biology. Despite the considerable progress made during the last decade, numerous fundamental questions related to this key process in plant development are outstanding. Numerous models have been proposed through the years to explain the detailed molecular events of cellulose biosynthesis. Almost all models integrate solid experimental data with hypotheses on several of the steps involved in the process. Speculative models are most useful to stimulate further research investigations and bring new exciting ideas to the field. However, it is important to keep their hypothetical nature in mind and be aware of the risk that some undemonstrated hypotheses may progressively become admitted. In this review, we discuss the different steps required for cellulose formation and crystallization, and highlight the most important specific aspects that are supported by solid experimental data.

Plant cell wall matrix polysaccharide biosynthesis

The wall of an expanding plant cell consists primarily of cellulose microfibrils embedded in a matrix of hemicellulosic and pectic polysaccharides along with small amounts of structural and enzymatic proteins. Matrix polysaccharides are synthesized in the Golgi and exported to the cell wall by exocytosis, where they intercalate among cellulose microfibrils, which are made at the plasma membrane and directly deposited into the cell wall. Involvement of Golgi glucan synthesis in auxin-induced cell expansion has long been recognized; however, only recently have the genes corresponding to glucan synthases been identified. Biochemical purification was unsuccessful because of the labile nature and very low abundance of these enzymes. Mutational genetics also proved fruitless. Expression of candidate genes identified through gene expression profiling or comparative genomics in heterologous systems followed by functional characterization has been relatively successful. Several genes from the cellulose synthase-like (Csl) family have been found to be involved in the synthesis of various hemicellulosic glycans. The usefulness of this approach, however, is limited to those enzymes that probably do not form complexes consisting of unrelated proteins. Nonconventional approaches will continue to incrementally unravel the mechanisms of Golgi polysaccharide biosynthesis.

Chitin in diatoms and its association with the cell wall

Chitin is a globally abundant polymer widely distributed throughout eukaryotes that has been well characterized in only a few lineages. Diatoms are members of the eukaryotic lineage of stramenopiles. Of the hundreds of diatom genera, two produce long fibers of chitin that extrude through their cell walls of silica. We identify and describe here genes encoding putative chitin synthases in a variety of additional diatom genera, indicating that the ability to produce chitin is more widespread and likely plays a more central role in diatom biology than previously considered. Diatom chitin synthases fall into four phylogenetic clades. Protein domain predictions and differential gene expression patterns provide evidence that chitin synthases have multiple functions within a diatom cell. Thalassiosira pseudonana possesses six genes encoding three types of chitin synthases. Transcript abundance of the gene encoding one of these chitin synthase types increases when cells resume division after short-term silicic acid starvation and during short-term limitation by silicic acid or iron, two nutrient conditions connected in the environment and known to affect the cell wall. During long-term silicic acid starvation transcript abundance of this gene and one additional chitin synthase gene increased at the same time a chitin-binding lectin localized to the girdle band region of the cell wall. Together, these results suggest that the ability to produce chitin is more widespread in diatoms than previously thought and that a subset of the chitin produced by diatoms is associated with the cell wall.

A tethering mechanism for length control in a processive carbohydrate polymerization

Carbohydrate polymers are the most abundant organic substances on earth. Their degrees of polymerization range from tens to thousands of units, yet polymerases generate the relevant lengths without the aid of a template. To gain insight into template-independent length control, we investigated how the mycobacterial galactofuranosyl-transferase GlfT2 mediates formation of the galactan, a polymer of galactofuranose residues that is an integral part of the cell wall. We show that isolated recombinant GlfT2 can catalyze the synthesis of polymers with degrees of polymerization that are commensurate with values observed in mycobacteria, indicating that length control by GlfT2 is intrinsic. Investigations using synthetic substrates reveal that GlfT2 is processive. The data indicate that GlfT2 controls length by using a substrate tether, which is distal from the site of elongation. The strength of interaction of that tether with the polymerase influences the length of the resultant polymer. Thus, our data identify a mechanism for length control by a template-independent polymerase.

Regulation of the cellulose synthase-like gene family by light in the maize mesocotyl

The cellulose synthase-like (ZmCSL) gene family of maize was annotated and its expression studied in the maize mesocotyl. A total of 28 full-length CSL genes and another 13 partial sequences were annotated; four are predicted to be pseudogenes. Maize has all of the CSL subfamilies that are present in rice, but the CSLC subfamily is expanded from 6 in rice to 12 in maize, and the CSLH subfamily might be reduced from 3 to 1. Unlike rice, maize has a gene in the CSLG subfamily, based on its sequence similarity to two genes annotated as CSLG in poplar. Light regulation of glycan synthase enzyme activities and CSL gene expression were analyzed in the mesocotyl. A Golgi-localized glucan synthase activity is reduced by ~50% 12 h after exposure to light. beta-1,4-Mannan synthase activity is reduced even more strongly (>85%), whereas beta-1,4-xylan synthase, callose synthase, and latent IDPase activity respond only slightly, if at all, to light. At least 17 of the CSL genes (42%) are expressed in the mesocotyl, of which four are up-regulated at least twofold, seven are down-regulated at least twofold, and six are not affected by light. The results contribute to our understanding of the structure of the CSL gene family in an important food and biofuel plant, show that a large percentage of the CSL genes are expressed in the specialized tissues of the mesocotyl, and demonstrate that members of the CSL gene family are differentially subject to photobiological regulation.

Molecular characterization of Alg8, a putative glycosyltransferase, involved in alginate polymerisation

The topology of Alg8, the proposed catalytic subunit of the alginate polymerase, was assessed using PhoA and LacZ fusion protein analysis. This analysis suggested that the periplasmic loop comprises only three amino acid residues with the adjacent transmembrane helices at positions 361-387 and 393-416. Accordingly, the extended cytosolic loop could be located at positions 71-361 and was proposed to contain important catalytic residues. Further experimental evidence for this cytosolic domain was obtained by independently demonstrating this protein region as purified soluble protein domain. The soluble protein domain was identified by MALDI-TOF/MS and presumably represents the cytosolic catalytic domain of Alg8. Site-directed mutagenesis of 11 conserved residues in the cytosolic loop showed that D-188/D-190 (DXD motif), D-295/D-296 (acid-base catalysts) and K-297 were each essential for in vivo polymerase activity, whereas D-179/D-181 (DXD motif), C-244, R-263, D-279, and E-282 were not directly involved in the polymerisation reaction. The role of these amino acid residues with respect to the catalysed alginate polymerisation reaction was discussed with the aid of the recently developed structural model of Alg8.

A kinetic model for chain length modulation of Streptococcus pneumoniae cellubiuronan capsular polysaccharide by nucleotide sugar donor concentrations

The chain length of Streptococcus pneumoniae type 3 capsular polysaccharide (cellubiuronic acid) is tightly regulated by the cellubiuronic acid synthase through an assembly process involving a catalytic motif that is potentially conserved over a wide range of related processive beta-glucan synthases. Cellubiuronic acid is initiated on a lipid and is composed of alternating beta-1,3-Glc and beta-1,4-glucuronic acid (GlcUA) linkages. The entire assembly process is carried out by a polypeptide synthase thought to contain a single active site, suggesting that the donor specificity is controlled by the terminal nonreducing sugar in the acceptor subsite. Shortly after initiation, the synthase undergoes an allosteric transition accompanied by the tight binding of the nascent chain via its nonreducing oligosaccharide terminal segment to the carbohydrate acceptor recognition site. The chain length of polysaccharide assembled by recombinant synthase in Escherichia coli membranes was determined by an ejection mechanism that appeared to be a reversal of the allosteric transition of the synthase from the transitory to the fully processive state. The rates of both ejection and transition were shown to be highly sensitive to the concentration of UDP-GlcUA. As the concentration of UDP-GlcUA was increased, both the rate of synthesis and the processive turnover time increased. The product of the processive turnover time and the rate of synthesis predicted a marked increase in polysaccharide chain size (from 50 to 1150 kDa) over a relatively narrow concentration range of 1-11.5 microm UDP-GlcUA. The kinetic model chain length predictions were in close agreement with chemically determined sizes of polysaccharides synthesized at the same UDP-sugar concentrations. The model indicates that translocation occurs following the addition of GlcUA to the chain terminus, whereas UDP-Glc drives chain termination when inadequate levels of UDP-GlcUA are present. In sum, type 3 synthase appears to modulate polysaccharide chain length by functioning as a concentration-dependent kinetic timing device.

AtCSLD2 is an integral Golgi membrane protein with its N-terminus facing the cytosol

Cellulose synthase-like proteins in the D family share high levels of sequence identity with the cellulose synthase proteins and also contain the processive beta-glycosyltransferase motifs conserved among all members of the cellulose synthase superfamily. Consequently, it has been hypothesized that members of the D family function as either cellulose synthases or glycan synthases involved in the formation of matrix polysaccharides. As a prelude to understanding the function of proteins in the D family, we sought to determine where they are located in the cell. A polyclonal antibody against a peptide located at the N-terminus of the Arabidopsis D2 cellulose synthase-like protein was generated and purified. After resolving Golgi vesicles from plasma membranes using endomembrane purification techniques including two-phase partitioning and sucrose density gradient centrifugation, we used antibodies against known proteins and marker enzyme assays to characterize the various membrane preparations. The Arabidopsis cellulose synthase-like D2 protein was found mostly in a fraction that was enriched with Golgi membranes. In addition, versions of the Arabidopsis cellulose synthase-like D2 proteins tagged with a green fluorescent protein was observed to co-localize with a DsRed-tagged Golgi marker protein, the rat alpha-2,6-sialyltransferase. Therefore, we postulate that the majority of Arabidopsis cellulose synthase-like D proteins, under our experimental conditions, are likely located at the Golgi membranes. Furthermore, protease digestion of Golgi-rich vesicles revealed almost complete loss of reaction with the antibodies, even without detergent treatment of the Golgi vesicles. Therefore, the N-terminus of the Arabidopsis cellulose synthase-like D2 protein likely faces the cytosol. Combining this observation with the transmembrane domain predictions, we postulate that the large hydrophilic domain of this protein also faces the cytosol.

Cellulose biosynthesis by the beta-proteobacterium, Chromobacterium violaceum

The Chromobacterium violaceum ATCC 12472 genome was sequenced by The Brazilian National Genome Project Consortium. Previous annotation reported the presence of cellulose biosynthesis genes in that genome. Analysis of these genes showed that, as observed in other bacteria, they are organized in two operons. In the present work, experimental evidences of the presence of cellulose in the extracellular matrix of the biofilm produced by C. violaceum in static cultures are shown. Biofilm samples were enzymatically digested by cellulase, releasing glucose units, suggesting the presence of cellulose as an extracellular matrix component. Fluorescence microscopy observations showed that C. violaceum produces a cellulase-sensitive extracellular matrix composed of fibers able to bind calcofluor. C. violaceum grows on medium containing Congo red, forming brown-red colonies. Together, these results suggest that cellulase-susceptible matrix material is cellulose. Scanning electronic microscopy analysis showed that the extracellular matrix exhibited a network of microfibrils, typical of bacterial cellulose. Although cellulose production is widely distributed between several bacterial species, including at least the groups of Gram-negative proteobacteria alpha and gamma, we give for the first time experimental evidence for cellulose production in beta-proteobacteria.

Embryonic desiccation resistance in Aedes aegypti: presumptive role of the chitinized serosal cuticle

Background

One of the major problems concerning dengue transmission is that embryos of its main vector, the mosquito Aedes aegypti, resist desiccation, surviving several months under dry conditions. The serosal cuticle (SC) contributes to mosquito egg desiccation resistance, but the kinetics of SC secretion during embryogenesis is unknown. It has been argued that mosquito SC contains chitin as one of its components, however conclusive evidence is still missing.

Results

We observed an abrupt acquisition of desiccation resistance during Ae. aegypti embryogenesis associated with serosal cuticle secretion, occurring at complete germ band extension, between 11 and 13 hours after egglaying. After SC formation embryos are viable on dry for at least several days. The presence of chitin as one of the SC constituents was confirmed through Calcofluor and WGA labeling and chitin quantitation. The Ae. aegypti Chitin Synthase A gene (AaCHS1) possesses two alternatively spliced variants, AaCHS1a and AaCHS1b, differentially expressed during Ae. aegypti embryonic development. It was verified that at the moment of serosal cuticle formation, AaCHS1a is the sole variant specifically expressed.

Conclusion

In addition to the peritrophic matrix and exoskeleton, these findings confirm chitin is also present in the mosquito serosal cuticle. They also point to the role of the chitinized SC in the desiccation resistance of Ae. aegypti eggs. AaCHS1a expression would be responsible for SC chitin synthesis. With this embryological approach we expect to shed new light regarding this important physiological process related to the Ae. aegypti life cycle.

Characterization of the Caulobacter crescentus holdfast polysaccharide biosynthesis pathway reveals significant redundancy in the initiating glycosyltransferase and polymerase steps

Caulobacter crescentus cells adhere to surfaces by using an extremely strong polar adhesin called the holdfast. The polysaccharide component of the holdfast is comprised in part of oligomers of N-acetylglucosamine. The genes involved in the export of the holdfast polysaccharide and the anchoring of the holdfast to the cell were previously discovered. In this study, we identified a cluster of polysaccharide biosynthesis genes (hfsEFGH) directly adjacent to the holdfast polysaccharide export genes. Sequence analysis indicated that these genes are involved in the biosynthesis of the minimum repeat unit of the holdfast polysaccharide. HfsE is predicted to be a UDP-sugar lipid-carrier transferase, the glycosyltransferase that catalyzes the first step in polysaccharide biosynthesis. HfsF is predicted to be a flippase, HfsG is a glycosyltransferase, and HfsH is similar to a polysaccharide (chitin) deacetylase. In-frame hfsG and hfsH deletion mutants resulted in severe deficiencies both in surface adhesion and in binding to the holdfast-specific lectin wheat germ agglutinin. In contrast, hfsE and hfsF mutants exhibited nearly wild-type levels of adhesion and holdfast synthesis. We identified three paralogs to hfsE, two of which are redundant to hfsE for holdfast synthesis. We also identified a redundant paralog to the hfsC gene, encoding the putative polysaccharide polymerase, and present evidence that the hfsE and hfsC paralogs, together with the hfs genes, are absolutely required for proper holdfast synthesis.

Membrane topology and roles of Pseudomonas aeruginosa Alg8 and Alg44 in alginate polymerization

Mucoid strains of Pseudomonas aeruginosa that overproduce alginate are associated with chronic pulmonary disease (e.g. cystic fibrosis). Mutants defective in one of several periplasmic proteins (AlgKGX) for alginate secretion release alginate fragments due to the activity of an alginate lyase (AlgL) in the periplasm, which cleaves the newly formed polymers. However, mutants defective in Alg8 or Alg44 did not secrete polymer or alginate fragments, suggesting that both these membrane proteins have a role in the polymerization reaction. A model for the membrane topology of Alg8, a glycosyltransferase (GT), was constructed using PhoA fusions. This provided evidence for a large cytoplasmic loop containing the active domains predicted for beta-GTs such as Alg8 and five transmembrane (TM) domains, one of which resembles a cleavable signal peptide. The C-terminal TM domain of Alg8 was critical for the polymerization reaction in vivo. Alanine substitution mutagenesis showed that all of the predicted active site residues in the widely spaced D, DxD, D, LxxRW motif were required for polymerization activity in vivo, and two of these substitutions also affected Alg8 protein stability. A membrane topology model for Alg44 was also constructed using PhoA fusions, and this showed a central TM domain and predicted an N-terminal TM domain that may be a membrane anchor. An N-terminal PilZ domain in Alg44 for c-di-GMP [bis-(3',5')-cyclic dimeric GMP] binding, which is required for alginate synthesis, was localized to the cytoplasmic loop. The long periplasmic C terminus of Alg44 contains a region similar to membrane fusion proteins (MFPs) of multi-drug efflux systems, which predicts the possibility of its interaction with another protein in this compartment. A Western blot analysis of the outer-membrane porin AlgE showed reduced AlgE levels in the alg44 mutant, whereas expression of Alg44 in trans restored AlgE within the cell. C-terminal truncations of Alg44 as small as 24 amino acids blocked alginate polymerization in vivo, indicating a critical role for the MFP domain. These studies suggest that Alg44 may act as a co-polymerase in concert with Alg8, the major GT, and that both inner-membrane proteins are required in vivo for the polymerization reaction leading to alginate production.

Molecular basis of S-layer glycoprotein glycan biosynthesis in Geobacillus stearothermophilus

The Gram-positive bacterium Geobacillus stearothermophilus NRS 2004/3a possesses a cell wall containing an oblique surface layer (S-layer) composed of glycoprotein subunits. O-Glycans with the structure [-->2)-alpha-L-Rhap-(1-->3)-beta-L-Rhap-(1-->2)-alpha-L-Rhap-(1-->](n) (= 13-18), a2-O-methyl group capping the terminal repeating unit at the nonreducing end and a -->2)-alpha-L-Rhap-[(1-->3)-alpha-L-Rhap](n) (= 1-2)(1-->3)- adaptor are linked via a beta-D-Galp residue to distinct sites of the S-layer protein SgsE. S-layer glycan biosynthesis is encoded by a polycistronic slg (surface layer glycosylation) gene cluster. Four assigned glycosyltransferases named WsaC-WsaF, were investigated by a combined biochemical and NMR approach, starting from synthetic octyl-linked saccharide precursors. We demonstrate that three of the enzymes are rhamnosyltransferases that are responsible for the transfer of L-rhamnose from a dTDP-beta-L-Rha precursor to the nascent S-layer glycan, catalyzing the formation of the alpha1,3- (WsaC and WsaD) and beta1,2-linkages (WsaF) present in the adaptor saccharide and in the repeating units of the mature S-layer glycan, respectively. These enzymes work in concert with a multifunctional methylrhamnosyltransferase (WsaE). The N-terminal portion of WsaE is responsible for the S-adenosylmethionine-dependent methylation reaction of the terminal alpha1,3-linked L-rhamnose residue, and the central and C-terminal portions are involved in the transfer of L-rhamnose from dTDP-beta-L-rhamnose to the adaptor saccharide to form the alpha1,2- and alpha1,3-linkages during S-layer glycan chain elongation, with the methylation and the glycosylation reactions occurring independently. Characterization of these enzymes thus reveals the complete molecular basis for S-layer glycan biosynthesis.

A thermostable dolichol phosphoryl mannose synthase responsible for glycoconjugate synthesis of the hyperthermophilic archaeon Pyrococcus horikoshii

Dolichol phosphoryl mannose synthase (DPM synthase) is an essential enzyme in the synthesis of N- and O-linked glycoproteins and the glycosylphosphatidyl-inositol anchor. An open reading frame, PH0051, from the hyperthermophilic archaeon Pyrococcus horikoshii encodes a DPM synthase ortholog, PH0051p. A full-length version of PH0051p was produced using an E. coli in vitro translation system and its thermostable activity was confirmed with a DPM synthesis assay, although the in vitro productivity was not sufficient for further characterization. Then, a yeast expression vector coding for the N-terminal catalytic domain of PH0051p was constructed. The N-terminal domain, named DPM(1-237), was successfully expressed, and turned out to be a membrane-bound form in Saccharomyces cerevisiae cells, even without its hydrophobic C-terminal domain. The membrane-bound DPM(1-237) was solubilized with a detergent and purified to homogeneity. The purified DPM(1-237) showed thermostability at up to 75 degrees C and an optimum temperature of 60 degrees C. The truncated mutant DPM(1-237) required Mg(2+) and Mn(2+) ions as cofactors the same as eukaryotic DPM synthases. By site-directed mutagenesis, Asp(89) and Asp(91) located at the most conserved motif, DXD, were confirmed as the catalytic residues, the latter probably bound to a cofactor, Mg(2+). DPM(1-237) was able to utilize both acceptor lipids, dolichol phosphate and the prokaryotic carrier lipid C(55)-undecaprenyl phosphate, with Km values of 1.17 and 0.59 microM, respectively. The DPM synthase PH0051p seems to be a key component of the pathway supplying various lipid-linked phosphate sugars, since P. horikoshii could synthesize glycoproteins as well as the membrane-associated PH0051p in vivo.

A cellulose synthase-like protein involved in hyphal tip growth and morphological differentiation in streptomyces

Cellulose synthase and cellulose synthase-like proteins, responsible for synthesizing beta-glucan-containing polysaccharides, play a fundamental role in cellular architectures, such as plant cell and tissue morphogenesis, bacterial biofilm formation, and fruiting-body development. However, the roles of the proteins involved in the developmental process are not well understood. Here, we report that a cellulose synthase-like protein (CslA(Sc)) in Streptomyces has a function in hyphal tip growth and morphological differentiation. The cslA(Sc) replacement mutant showed pleiotropic defects, including the severe delay of aerial-hyphal formation and altered cell wall morphology. Calcofluor white fluorescence analysis demonstrated that polysaccharide synthesis at hyphal tips was dependent on CslA(Sc). cslA(Sc) was constitutively transcribed, and an enhanced green fluorescent protein-CslA(Sc) fusion protein was mostly located at the hyphal tips. An extract enriched in morphogenetic chaplin proteins promoted formation of aerial hyphae by the mutant. Furthermore, a two-hybrid experiment indicated that the glycosyltransferase domain of CslA(Sc) interacted with the tropomyosin-like polarity-determining DivIVA protein, suggesting that the tip-located DivIVA governed tip recruitment of the CslA(Sc) membrane protein. These results imply that the cellulose synthase-like protein couples extracellular and cytoskeletal components functioning in tip growth and cell development.

Capsular exopolysaccharide biosynthesis gene of Propionibacterium freudenreichii subsp. shermanii

In the dairy industry, exopolysaccharides (EPS) contribute to improving the texture and viscosity of cheese and yoghurt and also receive increasing attention because of their beneficial properties for health. For lactic acid bacteria, the production of EPS is well studied. However, for dairy propionibacteria the biosynthesis of EPS is poorly documented. A polysaccharide synthase-encoding gene was identified in the genome of Propionibacterium freudenreichii subsp. shermanii TL 34 (CIP 103027). This gene best aligns with Tts, the polysaccharide synthase gene of Streptococcus pneumoniae type 37 that is responsible for the production of a beta-glucan capsular polysaccharide. PCR amplification showed the presence of an internal fragment of this gene in twelve strains of P. freudenreichii subsp. shermanii with a ropy phenotype in YEL+ medium. The gene sequence is highly conserved, as less than 1% of nucleotides differed among the 10 strains containing the complete gtf gene. The same primers failed to detect the gene in Propionibacterium acidipropionici strain TL 47, which is known to excrete exopolysaccharides in milk. The presence of (1-->3, 1-->2)-beta-d-glucan capsule was demonstrated for 7 out of 12 strains by agglutination with a S. pneumoniae-type 37-specific antiserum. The presence of mRNA corresponding to the gene was detected by RT-PCR in three strains at both exponential and stationary growth phases. This work represents the first identification of a polysaccharide synthase gene of P. freudenreichii, and further studies will be undertaken to elucidate the role of capsular EPS.

Cellulose synthesis in Phytophthora infestans is required for normal appressorium formation and successful infection of potato

Cellulose, the important structural compound of cell walls, provides strength and rigidity to cells of numerous organisms. Here, we functionally characterize four cellulose synthase genes (CesA) in the oomycete plant pathogen Phytophthora infestans, the causal agent of potato (Solanum tuberosum) late blight. Three members of this new protein family contain Pleckstrin homology domains and form a distinct phylogenetic group most closely related to the cellulose synthases of cyanobacteria. Expression of all four genes is coordinately upregulated during pre- and early infection stages of potato. Inhibition of cellulose synthesis by 2,6-dichlorobenzonitrile leads to a dramatic reduction in the number of normal germ tubes with appressoria, severe disruption of the cell wall in the preinfection structures, and a complete loss of pathogenicity. Silencing of the entire gene family in P. infestans with RNA interference leads to a similar disruption of the cell wall surrounding appressoria and an inability to form typical functional appressoria. In addition, the cellulose content of the cell walls of the silenced lines is >50% lower than in the walls of the nonsilenced lines. Our data demonstrate that the isolated genes are involved in cellulose biosynthesis and that cellulose synthesis is essential for infection by P. infestans.

Differential expression of three eucalyptus secondary cell wall-related cellulose synthase genes in response to tension stress

Trees constitute the majority of lignocellulosic biomass existing on our planet. Trees also serve as important feedstock materials for various industrial products. However, little is known about the regulatory mechanisms of cellulose synthase (CesA) genes of trees. Here, the cloning and characterization of three CesA genes (EgraCesA1, EgraCesA2, and EgraCesA3) from an economically important tree species, Eucalyptus grandis, are reported. All three genes were specifically expressed in xylem cells of eucalyptus undergoing secondary cell wall biosynthesis. The GUS gene, expressed under the control of the EgraCesA2 or EgraCesA3 promoter, was also localized in the secondary xylem in transgenic tobacco stems. However, the EgraCesA1 promoter alone or along with its 5'-UTR introns was insufficient to direct appropriate GUS expression. EgraCesA2 and EgraCesA3 gene expression was up-regulated in tension-stressed eucalyptus xylem cells. Accordingly, GUS expression directed by the EgraCesA2 or EgraCesA3 promoter was also up-regulated. EgraCesA1 had no such response. Thus, it is most unlikely that EgraCesA1 is a subunit of the EgraCesA2-EgraCesA3 complex. The presence of at least two types of cellulose biosynthesis machinery in wood formation is an important clue in deciphering the underpinnings of the perennial growth of trees in various environmental conditions. By analysing GUS gene expression directed by the EgraCesA3 promoter or its deletions, several negative and positive regulatory regions controlling gene expression in xylem or phloem were identified. Also a region which is likely to contain mechanical stress-responsive elements was deduced. These results will guide further studies on identifying cis-regulatory elements directing CesA gene transcription and wood formation regulatory networks.

Cellulose biosynthesis and deposition in higher plants

The plant cell wall is central to plant development. Cellulose is a major component of plant cell walls, and is the world's most abundant biopolymer. Cellulose contains apparently simple linear chains of glucose residues, but these chains aggregate to form immensely strong microfibrils. It is the physical properties of these microfibrils that, when laid down in an organized manner, are responsible for both oriented cell elongation during plant growth and the strength required to maintain an upright growth habit. Despite the importance of cellulose, only recently have we started to unravel details of its synthesis. Mutational analysis has allowed us to identify some of the proteins involved in its synthesis at the plasma membrane, and to define a set of cellulose synthase enzymes essential for cellulose synthesis. These proteins are organized into a very large plasma membrane-localized protein complex. The way in which this protein complex is regulated and directed is central in depositing cellulose microfibrils in the wall in the correct orientation, which is essential for directional cell growth. Recent developments have given us clues as to how cellulose synthesis and deposition is regulated, an understanding of which is essential if we are to manipulate cell wall composition.