Morphogenesis of bacillus spore surfaces

Adhesion of spores of Bacillus thuringiensis on a planar surface

Adhesion of spores of Bacillus thuringiensis (Bt) and spherical silica particles on surfaces was experimentally and theoretically investigated in this study. Topography analysis via atomic force microscopy (AFM) and electron microscopy indicates that Bt spores are rod shaped, approximately 1.3 mum in length and approximately 0.8 mum in diameter. The adhesion force of Bt spores and silica particles on gold-coated glass was measured at various relative humidity (RH) levels by AFM. It was expected that the adhesion force would vary with RH because the individual force components contributing to the adhesion force depend on RH. The adhesion force between a particle and a planar surface in atmospheric environments was modeled as the contribution of three major force components: capillary, van der Waals, and electrostatic interaction forces. Adhesion force measurements for Bt spore (silica particle) and the gold surface system were comparable with calculations. Modeling results show that there is a critical RH value, which depends on the hydrophobicity of the materials involved, below which the water meniscus does not form and the contribution of the capillary force is zero. As RH increases, the van der Waals force decreases while the capillary force increases to a maximum value.

Rhodobacter johrii sp. nov., an endospore-producing cryptic species isolated from semi-arid tropical soils

An oval to rod-shaped, phototrophic, purple non-sulfur bacterium, strain JA192(T), was isolated from an enrichment culture of a pasteurized rhizosphere soil sample from a field cultivated with jowar (sorghum) collected from Godumakunta village near Hyderabad, India. Strain JA192(T) is Gram-negative, motile and produces endospores. Phylogenetic analysis on the basis of 16S rRNA gene sequences showed that the strain JA192(T) is closely related to Rhodobacter sphaeroides 2.4.1(T) (99.9 % sequence similarity), Rba. megalophilus JA194(T) (99.8 %) and Rba. azotoformans KA25(T) (98.1 %) and clusters with other species of the genus Rhodobacter of the family Rhodobacteraceae. However, DNA-DNA hybridization with Rba. sphaeroides DSM 158(T), Rba. megalophilus JA194(T) and Rba. azotoformans JCM 9340(T) showed relatedness of only 38-57 % with respect to strain JA192(T). On the basis of 16S rRNA gene sequence analysis, DNA-DNA hybridization data and morphological, physiological and chemotaxonomic characters, strain JA192(T) represents a novel species of the genus Rhodobacter, for which the name Rhodobacter johrii sp. nov. is proposed. The type strain is JA192(T) (=DSM 18678(T) =JCM 14543(T) =MTCC 8172(T)).

Structural and genetic analysis of X-ray scattering by spores of Bacillus subtilis

Dormant spores of Bacillus subtilis exhibit two prominent X-ray scattering peaks. These peaks persisted in spores lacking most alpha/beta-type small, acid-soluble protein or the CotE protein responsible for assembly of much spore coat protein, but they were absent from spores of strains lacking the late sporulation-specific transcription factor GerE.

Bacillus anthracis physiology and genetics

Bacillus anthracis is a member of the Bacillus cereus group species (also known as the "group 1 bacilli"), a collection of Gram-positive spore-forming soil bacteria that are non-fastidious facultative anaerobes with very similar growth characteristics and natural genetic exchange systems. Despite their close physiology and genetics, the B. cereus group species exhibit certain species-specific phenotypes, some of which are related to pathogenicity. B. anthracis is the etiologic agent of anthrax. Vegetative cells of B. anthracis produce anthrax toxin proteins and a poly-d-glutamic acid capsule during infection of mammalian hosts and when cultured in conditions considered to mimic the host environment. The genes associated with toxin and capsule synthesis are located on the B. anthracis plasmids, pXO1 and pXO2, respectively. Although plasmid content is considered a defining feature of the species, pXO1- and pXO2-like plasmids have been identified in strains that more closely resemble other members of the B. cereus group. The developmental nature of B. anthracis and its pathogenic (mammalian host) and environmental (soil) lifestyles of make it an interesting model for study of niche-specific bacterial gene expression and physiology.

Localization and assembly of proteins comprising the outer structures of the Bacillus anthracis spore

Bacterial spores possess a series of concentrically arranged protective structures that contribute to dormancy, survival and, ultimately, germination. One of these structures, the coat, is present in all spores. In Bacillus anthracis, however, the spore is surrounded by an additional, poorly understood, morphologically complex structure called the exosporium. Here, we characterize three previously discovered exosporium proteins called ExsFA (also known as BxpB), ExsFB (a highly related paralogue of exsFA/bxpB) and IunH (similar to an inosine-uridine-preferring nucleoside hydrolase). We show that in the absence of ExsFA/BxpB, the exosporium protein BclA accumulates asymmetrically to the forespore pole closest to the midpoint of the sporangium (i.e. the mother-cell-proximal pole of the forespore), instead of uniformly encircling the exosporium. ExsFA/BxpB may also have a role in coat assembly, as mutant spore surfaces lack ridges seen in wild-type spores and have a bumpy appearance. ExsFA/BxpB also has a modest but readily detected effect on germination. Nonetheless, an exsFA/bxpB mutant strain is fully virulent in both intramuscular and aerosol challenge models in Guinea pigs. We show that the pattern of localization of ExsFA/BxpB-GFP is a ring, consistent with a location for this protein in the basal layer of the exosporium. In contrast, ExsFB-GFP fluorescence is a solid oval, suggesting a distinct subcellular location for ExsFB-GFP. We also used these fusion proteins to monitor changes in the subcellular locations of these proteins during sporulation. Early in sporulation, both fusions were present throughout the mother cell cytoplasm. As sporulation progressed, GFP fluorescence moved from the mother cell cytoplasm to the forespore surface and formed either a ring of fluorescence, in the case of ExsFA/BxpB, or a solid oval of fluorescence, in the case of ExsFB. IunH-GFP also resulted in a solid oval of fluorescence. We suggest the interpretation that at least some ExsFB-GFP and IunH-GFP resides in the region between the coat and the exosporium, called the interspace.

Towards nanomicrobiology using atomic force microscopy

At the cross-roads of nanoscience and microbiology, the nanoscale analysis of microbial cells using atomic force microscopy (AFM) is an exciting, rapidly evolving research field. Over the past decade, there has been tremendous progress in our use of AFM to observe membrane proteins and live cells at high resolution. Remarkable advances have also been made in applying force spectroscopy to manipulate single membrane proteins, to map surface properties and receptor sites on cells and to measure cellular interactions at the single-cell and single-molecule levels. In addition, recent developments in cantilever nanosensors have opened up new avenues for the label-free detection of microorganisms and bioanalytes.

Identification of Bacillus anthracis spore component antigens conserved across diverse Bacillus cereus sensu lato strains

We sought to identify proteins in the Bacillus anthracis spore, conserved in other strains of the closely related Bacillus cereus group, that elicit an immune response in mammals. Two high throughput approaches were used. First, an in silico screening identified 200 conserved putative B. anthracis spore components. A total of 192 of those candidate genes were expressed and purified in vitro, 75 of which reacted with the rabbit immune sera generated against B. anthracis spores. The second approach was to screen for cross-reacting antigens in the spore proteome of 10 diverse B. cereus group strains. Two-dimensional electrophoresis resolved more than 200 protein spots in each spore preparation. About 72% of the protein spots were found in all the strains. 18 of these conserved proteins reacted against anti-B. anthracis spore rabbit immune sera, two of which (alanine racemase, Dal-1 and the methionine transporter, MetN) overlapped the set of proteins identified using the in silico screen. A conserved repeat domain protein (Crd) was the most immunoreactive protein found broadly across B. cereus sensu lato strains. We have established an approach for finding conserved targets across a species using population genomics and proteomics. The results of these screens suggest the possibility of a multiepitope antigen for broad host range diagnostics or therapeutics against Bacillus spore infection.

Mobilisation of bacteria in a fine-grained residual soil by electrophoresis

An investigation of electrokinetic bacterial mobilisation in a residual soil from gneiss is presented here. The experimental program aimed at assessing the efficacy of electrophoresis against the electro-osmotic flow to transport endospores of Bacillus subtilis LBBMA 155 and nitrogen-starved cells of Pseudomonas sp. LBBMA 81. Electrokinesis was performed on a low hydraulic reconstituted clayey soil column submitted to a 5mA electrical current for 24h. Cells were coccoid-shaped and characterised as possessing low surface hydrophobicity and less than 1microm in diameter. Distribution coefficient for B. subtilis in the soil was between 16.8 and 19.9 times higher than that for Pseudomonas sp. Distribution coefficient for B. subtilis between eluate and anionic exchange column was 11.8 times higher than that for Pseudomonas sp. After the electrokinesis, it was shown that cells and endospores were distributed hyperbolically through the soil probe and moved against the electro-osmotic flow; however, endospores were transported throughout all soil core and starved cells only till half of its length. The higher transport efficiency of B. subtilis endospores was attributed to their higher negative charge on cell surface. These results demonstrate that electrokinesis can be used for bacteria transport in soils with low hydraulic conductivity, even against the electro-osmotic flow.

Mapping of proteomic composition on the surfaces of bacillus spores by atomic force microscopy-based immunolabeling

Atomic force microscopy (AFM) provides a unique capability to image high-resolution architecture and structural dynamics of pathogens (e.g., viruses, bacteria, and bacterial spores) at near-molecular resolution in native conditions. Further development of atomic force microscopy to enable the correlation of pathogen protein surface structures with specific gene products is essential to understand the mechanisms of the pathogen life cycle. We applied an AFM-based immunolabeling technique for the proteomic mapping of macromolecular structures through the visualization of the binding of antibodies, conjugated with nanogold particles, to specific epitopes on Bacillus spore surfaces. This information is generated while simultaneously acquiring the surface morphology of the pathogen. The immunospecificity of this labeling method was established through the utilization of specific polyclonal and monoclonal antibodies that target spore coat and exosporium epitopes of Bacillus atrophaeus and Bacillus anthracis spores.

Characterization of a Bacillus anthracis spore coat-surface protein that influences coat-surface morphology

Bacterial spores are encased in a multilayered proteinaceous shell, called the coat. In many Bacillus spp., the coat protects against environmental assault and facilitates germination. In Bacillus anthracis, the spore is the etiological agent of anthrax, and the functions of the coat likely contribute to virulence. Here, we characterize a B. anthracis spore protein, called Cotbeta, which is encoded only in the genomes of the Bacillus cereus group. We found that Cotbeta is synthesized specifically during sporulation and is assembled onto the spore coat surface. Our analysis of a cotbeta null mutant in the Sterne strain reveals that Cotbeta has a role in determining coat-surface morphology but does not detectably affect germination. In the fully virulent Ames strain, a cotbeta null mutation has no effect on virulence in a murine model of B. anthracis infection.

Four superoxide dismutases contribute to Bacillus anthracis virulence and provide spores with redundant protection from oxidative stress

The Bacillus anthracis genome encodes four superoxide dismutases (SODs), enzymes capable of detoxifying oxygen radicals. That two of these SODs, SOD15 and SODA1, are present in the outermost layers of the B. anthracis spore is indicated by previous proteomic analyses of the exosporium. Given the requirement that spores must survive interactions with reactive oxygen species generated by cells such as macrophages during infection, we hypothesized that SOD15 and SODA1 protect the spore from oxidative stress and contribute to the pathogenicity of B. anthracis. To test these theories, we constructed a double-knockout (Delta sod15 Delta sodA1) mutant of B. anthracis Sterne strain 34F2 and assessed its lethality in an A/J mouse intranasal infection model. The 50% lethal dose of the Delta sod15 Delta sodA1 strain was similar to that of the wild type (34F2), but surprisingly, measurable whole-spore SOD activity was greater than that in 34F2. A quadruple-knockout strain (Delta sod15 Delta sodA1 Delta sodC Delta sodA2) was then generated, and as anticipated, spore-associated SOD activity was diminished. Moreover, the quadruple-knockout strain, compared to the wild type, was attenuated more than 40-fold upon intranasal challenge of mice. Spore resistance to exogenously generated oxidative stress and to macrophage-mediated killing correlated with virulence in A/J mice. Allelic exchange that restored sod15 and sodA1 to their wild-type state restored wild-type characteristics. We conclude that SOD molecules within the spore afford B. anthracis protection against oxidative stress and enhance the pathogenicity of B. anthracis in the lung. We also surmise that the presence of four SOD alleles within the genome provides functional redundancy for this key enzyme.

Detection of Bacillus globigii spores using a Fourier transform infrared-attenuated total reflection method

The use of an alumina-coated ZnSe internal reflection element (IRE) to detect spores by attenuated total reflection infrared spectroscopy (FTIR-ATR) was investigated. Two methods for coating the IRE with alumina are described. It is shown that the adsorption proceeds through an interaction of the carboxylate groups on Bacillus globigii (BG) and positively charged sites on the alumina. The amount adsorbed is highly dependent on solution pH and passes through a maximum value near pH 5, which is dictated by the charge density on the spores and the charge density on the alumina surface. Furthermore, it is shown that lateral-lateral repulsion between the spores limits the maximum adsorbed amount, giving rise to a detection limit of 10(7) spores per cm2 of the IRE.

Characterization of spores of Bacillus subtilis that lack most coat layers

Spores of Bacillus subtilis have a thick outer layer of relatively insoluble protein called the coat, which protects spores against a number of treatments and may also play roles in spore germination. However, elucidation of precise roles of the coat in spore properties has been hampered by the inability to prepare spores lacking all or most coat material. In this work, we show that spores of a strain with mutations in both the cotE and gerE genes, which encode proteins involved in coat assembly and expression of genes encoding coat proteins, respectively, lack most extractable coat protein as seen by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, as well as the great majority of the coat as seen by atomic force microscopy. However, the cotE gerE spores did retain a thin layer of insoluble coat material that was most easily seen by microscopy following digestion of these spores with lysozyme. These severely coat-deficient spores germinated relatively normally with nutrients and even better with dodecylamine but not with a 1:1 chelate of Ca(2+) and dipicolinic acid. These spores were also quite resistant to wet heat, to mechanical disruption, and to treatment with detergents at an elevated temperature and pH but were exquisitely sensitive to killing by sodium hypochlorite. These results provide new insight into the role of the coat layer in spore properties.

Protozoal digestion of coat-defective Bacillus subtilis spores produces "rinds" composed of insoluble coat protein

The Bacillus subtilis spore coat is a multilayer, proteinaceous structure that consists of more than 50 proteins. Located on the surface of the spore, the coat provides resistance to potentially toxic molecules as well as to predation by the protozoan Tetrahymena thermophila. When coat-defective spores are fed to Tetrahymena, the spores are readily digested. However, a residue termed a "rind" that looks like coat material remains. As observed with a phase-contrast microscope, the rinds are spherical or hemispherical structures that appear to be devoid of internal contents. Atomic force microscopy and chemical analyses showed that (i) the rinds are composed of insoluble protein largely derived from both outer and inner spore coat layers, (ii) the amorphous layer of the outer coat is largely responsible for providing spore resistance to protozoal digestion, and (iii) the rinds and intact spores do not contain significant levels of silicon.

Application of carbohydrate microarray technology for the detection of Burkholderia pseudomallei, Bacillus anthracis and Francisella tularensis antibodies

We developed a microarray platform by immobilizing bacterial 'signature' carbohydrates onto epoxide modified glass slides. The carbohydrate microarray platform was probed with sera from non-melioidosis and melioidosis (Burkholderia pseudomallei) individuals. The platform was also probed with sera from rabbits vaccinated with Bacillus anthracis spores and Francisella tularensis bacteria. By employing this microarray platform, we were able to detect and differentiate B. pseudomallei, B. anthracis and F. tularensis antibodies in infected patients, and infected or vaccinated animals. These antibodies were absent in the sera of naïve test subjects. The advantages of the carbohydrate microarray technology over the traditional indirect hemagglutination and microagglutination tests for the serodiagnosis of melioidosis and tularemia are discussed. Furthermore, this array is a multiplex carbohydrate microarray for the detection of all three biothreat bacterial infections including melioidosis, anthrax and tularemia with one, multivalent device. The implication is that this technology could be expanded to include a wide array of infectious and biothreat agents.

Bactericidal effect of solar water disinfection under real sunlight conditions

Batch solar disinfection (SODIS) inactivation kinetics are reported for suspensions in water of Campylobacter jejuni, Yersinia enterocolitica, enteropathogenic Escherichia coli, Staphylococcus epidermidis, and endospores of Bacillus subtilis, exposed to strong natural sunlight in Spain and Bolivia. The exposure time required for complete inactivation (at least 4-log-unit reduction and below the limit of detection, 17 CFU/ml) under conditions of strong natural sunlight (maximum global irradiance, approximately 1,050 W m(-2) +/- 10 W m(-2)) was as follows: C. jejuni, 20 min; S. epidermidis, 45 min; enteropathogenic E. coli, 90 min; Y. enterocolitica, 150 min. Following incomplete inactivation of B. subtilis endospores after the first day, reexposure of these samples on the following day found that 4% (standard error, 3%) of the endospores remained viable after a cumulative exposure time of 16 h of strong natural sunlight. SODIS is shown to be effective against the vegetative cells of a number of emerging waterborne pathogens; however, bacterial species which are spore forming may survive this intervention process.

Recovery of spores from thermophilic dairy bacilli and effects of their surface characteristics on attachment to different surfaces

Spores from four Geobacillus spp. were isolated from a milk powder manufacturing line in New Zealand. Liquid sporulation media produced spore yields of approximately 10(7) spores ml(-1); spores were purified using a two-phase system created with polyethylene glycol 4000 and 3 M phosphate buffer. The zeta potentials of the spores from the four isolates ranged from -10 to -20 mV at neutral pH, with an isoelectric point between pH 3 and 4. Through contact angle measurements, spores were found to be hydrophilic and had relative hydrophobicity values of 10 to 40%, as measured by the microbial adhesion to hexadecane assay. The most hydrophilic spore isolate with the smallest negative charge attached in the highest numbers to Thermanox and stainless steel (1 x 10(4) spores cm(-2)), with fewer spores attaching to glass (3 x 10(3) spores cm(-2)). However, spores produced by the other three strains attached in similar numbers (P > 0.05) to all substrata (approximately 1 x 10(3) spores cm(-2)), indicating that there was no simple relationship between individual physicochemical interactions and spore adherence. Therefore, surface modifications which limit the attachment of one strain may not be effective for all stains, and control regimens need to be devised with reference to the characteristics of the particular strains of concern.

Structure, assembly, and function of the spore surface layers

Endospores formed by Bacillus, Clostridia, and related genera are encased in a protein shell called the coat. In many species, including B. subtilis, the coat is the outermost spore structure, and in other species, such as the pathogenic organisms B. anthracis and B. cereus, the spore is encased in an additional layer called the exosporium. Both the coat and the exosporium have roles in protection of the spore and in its environmental interactions. Assembly of both structures is a function of the mother cell, one of two cellular compartments of the developing sporangium. Studies in B. subtilis have revealed that the timing of coat protein production, the guiding role of a small group of morphogenetic proteins, and several types of posttranslational modifications are essential for the fidelity of the assembly process. Assembly of the exosporium requires a set of novel proteins as well as homologues of proteins found in the outermost layers of the coat and of some of the coat morphogenetic factors, suggesting that the exosporium is a more specialized structure of a multifunctional coat. These and other insights into the molecular details of spore surface morphogenesis provide avenues for exploitation of the spore surface layers in applications for biotechnology and medicine.

CotC-CotU heterodimerization during assembly of the Bacillus subtilis spore coat

We report evidence that CotC and CotU, two previously identified components of the Bacillus subtilis spore coat, are produced concurrently in the mother cell chamber of the sporulating cell under the control of sigmaK and GerE and immediately assembled around the forming spore. In the coat, the two proteins interact to form a coat component of 23 kDa. The CotU-CotC interaction was not detected in two heterologous hosts, suggesting that it occurs only in B. subtilis. Monomeric forms of both CotU and CotC failed to be assembled at the surface of the developing spore and accumulated in the mother cell compartment of cells mutant for cotE. In contrast, neither CotU nor CotC accumulated in the mother cell compartment of cells mutant for cotH. These results suggest that CotH is required to protect both CotU and CotC in the mother cell compartment of the sporangium and that CotE is needed to allow their assembly and subsequent interaction at the spore surface.

Inhibiting the transport of hazardous spores using polymer-based solutions

A series of polymer solutions were developed for the purpose of immobilizing aerosolized 1-10 mu m sized hazardous biological particles. The polymer solutions were designed as tools for emergency response and remediation personnel. The inhibition of secondary aerosolization and migration of biothreat particles has important implications for public health protection and contamination cleanup. Limiting further dispersion of particles such as Bacillus anthracis spores may reduce inhalation hazards and enhance remediation efficiencies. This study evaluated film-forming polymers that have multiple functional groups capable of attracting and binding particles; these included acrylates, cellulosics, vinyl polymers, and polyurethanes. The selected polymers were combined with appropriate solvents to design solutions that met specific performance objectives. The polymer solutions were then evaluated for key characteristics, such as high adhesion, high elasticity, low density, short drying time, low viscosity, and low surface tension. These solutions were also evaluated for their adhesion to biothreat agent in a series of wind tunnel experiments using highly refined aerosolized Bacillus atrophaeus spores (a simulant for anthrax, 1-3 mu m). Results demonstrated that a polymer solution, an amphoteric acrylate identified as NS-2, was the best candidate for attaching to spores and inhibiting reaerosolization. This polymer solution was anionic, thus providing the electrostatic (coulombic) attraction to cationic spores, had low surface tension, and performed well in wind tunnel tests.

Fingerprinting species and strains of Bacilli spores by distinctive coat surface morphology

In this work, we applied high-resolution atomic force microscopy (AFM) to identify and characterize similarities and differences in the spore surface morphology of strains from four species of Bacilli: B. anthracis, B. cereus, B. pumilis, and B. subtilis. Common features of the examined spores in the dry state included ridges that spanned the long axis of each spore, and nanometer-scale fine rodlets that covered the entire spore surface. However, important differences in these features between species permitted them to be distinguished by AFM. Specifically, each species possessed significant variation in ridge architecture, and the rodlet width in B. anthracis was significantly less than that of the other species. To characterize similarities and differences within a species, we examined three B. subtilis strains. The ridge patterns among the three strains were largely the same; however, we detected significant differences in the ridge dimensions. Taken together, these experiments provide important information about natural variation in spore surface morphology, define structural features that can serve as species- and strain-specific signatures, and give insight into the dynamics of spore coat flexibility and its role during spore dormancy and germination.

Bacillus subtilis spores: a novel microparticle adjuvant which can instruct a balanced Th1 and Th2 immune response to specific antigen

There is a current need for safe, cheap, and effective vaccine adjuvants, to combine with sub-unit antigens to enhance their immunogenicity. In this study we have used probiotic Bacillus subtilis spores, known to be safe and fully tolerated by ingestion in man, and explored their ability to influence the magnitude and diversity of immune responses induced against two model antigens, tetanus toxoid fragment C (TT) and ovalbumin (OVA) in mice. The results show that B. subtilis spores not only increased antibody and T cell responses to a co-administered soluble antigen, but also broadened them, to include both antigen-specific CD4+ and CD8+ T cell responses as well as complement and non-complement fixing antibody isotypes. Furthermore, following intranasal immunization, spores augmented specific IgA to co-administered antigen both in the local respiratory and distal vaginal mucosa, as well as increased antigen-specific IgG antibody in draining LN and blood. Collectively, these data demonstrate that naturally occurring, non-pathogenic, non-commensal spores of B. subtilis both instruct and augment polyvalent immune responses and highlight their clinical potential in future vaccines to generate broad-based immunity.

The exosporium of B. cereus contains a binding site for gC1qR/p33: implication in spore attachment and/or entry

B. cereus, is a member of a genus of aerobic, gram-positive, spore-forming rod-like bacilli, which includes the deadly, B. anthracis. Preliminary experiments have shown that gC1qR binds to B. cereus spores that have been attached to microtiter plates. The present studies were therefore undertaken, to examine if cell surface gC1qR plays a role in B. cereus spore attachment and/or entry. Monolayers of human colon carcinoma (Caco-2) and lung cells were grown to confluency on 6 mm coverslips in shell vials with gentle swirling in a shaker incubator. Then, 2 microl of a suspension of strain SB460 B. cereus spores (3x10(8)/ml, in sterile water), were added and incubated (1-4 h; 36 degrees C) in the presence or absence of anti-gC1qR mAb-carbon nanoloops. Examination of these cells by EM revealed that: (1) When B. cereus endospores contacted the apical Caco-2 cell surface, or lung cells, gC1qR was simultaneously detectable, indicating upregulation of the molecule. (2) In areas showing spore contact with the cell surface, gC1qR expression was often adjacent to the spores in association with microvilli (Caco-2 cells) or cytoskeletal projections (lung cells). (3) Furthermore, the exosporia of the activated and germinating spores were often decorated with mAb-nanoloops. These observations were further corroborated by experiments in which B.cereus spores were readily taken up by monocytes and neutrophils, and this uptake was partially inhibited by mAb 60.11, which recognizes the C1q binding site on gC1qR. Taken together, the data suggest a role, for gC1qR at least in the initial stages of spore attachment and/or entry.

Maintaining the transcription factor SpoIIID level late during sporulation causes spore defects in Bacillus subtilis

During sporulation of Bacillus subtilis, four regulatory proteins act in the order sigma(E), SpoIIID, sigma(K), and GerE to temporally control gene expression in the mother cell. sigma(E) and sigma(K) work sequentially with core RNA polymerase to transcribe different sets of genes. SpoIIID and GerE are small, sequence-specific DNA-binding proteins that activate or repress transcription of many genes. Previous studies showed that transcriptionally active sigma(K) RNA polymerase inhibits early mother cell gene expression, reducing accumulation of SpoIIID late in sporulation. Here, the effects of perturbing the mother cell gene regulatory network by maintaining the SpoIIID level late during sporulation are reported. Persistent expression was obtained by fusing spoIIID to the sigma(K)-controlled gerE promoter on a multicopy plasmid. Fewer heat- and lysozyme-resistant spores were produced by the strain with persistent spoIIID expression, but the number of spores resistant to organic solvents was unchanged, as was their germination ability. Transmission electron microscopy showed structural defects in the spore coat. Reporter fusions to sigma(K)-dependent promoters showed lower expression of gerE and cotC and higher expression of cotD. Altered expression of cot genes, which encode spore coat proteins, may account for the spore structural defects. These results suggest that one role of negative feedback by sigma(K) RNA polymerase on early mother cell gene expression is to lower the level of SpoIIID late during sporulation in order to allow normal expression of genes in the sigma(K) regulon.

The BclB glycoprotein of Bacillus anthracis is involved in exosporium integrity

Anthrax is a highly fatal disease caused by the gram-positive, endospore-forming, rod-shaped bacterium Bacillus anthracis. Spores, rather than vegetative bacterial cells, are the source of anthrax infections. Spores of B. anthracis are enclosed by a prominent loose-fitting structure called the exosporium. The exosporium is composed of a basal layer and an external hair-like nap. Filaments of the hair-like nap are made up largely of a single collagen-like glycoprotein called BclA. A second glycoprotein, BclB, has been identified in the exosporium layer. The specific location of this glycoprotein within the exosporium layer and its role in the biology of the spore are unknown. We created a mutant strain of B. anthracis DeltaSterne that carries a deletion of the bclB gene. The mutant was found to possess structural defects in the exosporium layer of the spore (visualized by electron microscopy, immunofluorescence, and flow cytometry) resulting in an exosporium that is more fragile than that of a wild-type spore and is easily lost. Immunofluorescence studies also indicated that the mutant strain produced spores with increased levels of the BclA glycoprotein accessible to the antibodies on the surface. The resistance properties of the mutant spores were unchanged from those of the wild-type spores. A bclB mutation did not affect spore germination or kinetics of spore survival within macrophages. BclB plays a key role in the formation and maintenance of the exosporium structure in B. anthracis.

Nanomicrobiology

Recent advances in atomic force microscopy (AFM) are revolutionizing our views of microbial surfaces. While AFM imaging is very useful for visualizing the surface of hydrated cells and membranes on the nanoscale, force spectroscopy enables researchers to locally probe biomolecular forces and physical properties. These unique capabilities allow us to address a number of questions that were inaccessible before, such as how does the surface architecture of microbes change as they grow or interact with drugs, and what are the molecular forces driving their interaction with antibiotics and host cells? Here, we provide a flavor of recent achievements brought by AFM imaging and single molecule force spectroscopy in microbiology.

Characterization of a commercialized SERS-active substrate and its application to the identification of intact Bacillus endospores

Surface-enhanced-Raman-spectroscopy (SERS) can be made an attractive approach for the identification of Raman-active compounds and biological materials (i.e., toxins, viruses, or intact bacterial cells or spores) through development of reproducible, spatially uniform SERS-active substrates. Recently, reproducible (from substrate to substrate), spatially homogeneous (over large areas) SERS-active substrates have been commercialized and are now available in the marketplace. Scanning electron microscopy and high-resolution, tapping-mode atomic force microscopy have been used to analyze these novel plasmonic surfaces for topographical consistency. Additionally, we have assessed, by wavelength-tunable microreflectance spectrometry, the spatial distribution of the localized surface plasmon resonance (LSPR) across a single substrate surface as well as the LSPR lambda(MAX) variance from substrate to substrate. These analyses reveal that these surfaces are topologically uniform with small LSPR variance from substrate to substrate. Further, we have utilized these patterned surfaces to acquire SERS spectral signatures of four intact, genetically distinct Bacillus spore species cultivated under identical growth conditions. Salient spectral signature features make it possible to discriminate among these genetically distinct spores. Additionally, partial least squares, a multivariate calibration method, has been used to develop personal-computer-borne algorithms useful for classification of unknown spore samples based solely on SERS spectral signatures. To our knowledge, this is the first report detailing application of these commercially available SERS-active substrates to identification of intact Bacillus spores.

In vitro high-resolution structural dynamics of single germinating bacterial spores

Although significant progress has been achieved in understanding the genetic and biochemical bases of the spore germination process, the structural basis for breaking the dormant spore state remains poorly understood. We have used atomic force microscopy (AFM) to probe the high-resolution structural dynamics of single Bacillus atrophaeus spores germinating under native conditions. Here, we show that AFM can reveal previously unrecognized germination-induced alterations in spore coat architecture and topology as well as the disassembly of outer spore coat rodlet structures. These results and previous studies in other microorganisms suggest that the spore coat rodlets are structurally similar to amyloid fibrils. AFM analysis of the nascent surface of the emerging germ cell revealed a porous network of peptidoglycan fibers. The results are consistent with a honeycomb model structure for synthetic peptidoglycan oligomers determined by NMR. AFM is a promising experimental tool for investigating the morphogenesis of spore germination and cell wall peptidoglycan structure.

Early events of Bacillus anthracis germination identified by time-course quantitative proteomics

Germination of Bacillus anthracis spores involves rehydration of the spore interior and rapid degradation of several of the protective layers, including the spore coat. Here, we examine the temporal changes that occur during B. anthracis spore germination using an isobaric tagging system. Over the course of 17 min from the onset of germination, the levels of at least 19 spore proteins significantly decrease. Included are acid-soluble proteins, several known and predicted coat proteins, and proteins of unknown function. Over half of these proteins are small (less than 100 amino acids) and would have been undetectable by conventional gel-based analysis. We also identified 20 proteins, whose levels modestly increased at the later time points when metabolism has likely resumed. Taken together, our data show that isobaric labeling of complex mixtures is particularly effective for temporal studies. Furthermore, we describe a rigorous statistical approach to define relevant changes that takes into account the nature of data obtained from multidimensional protein identification technology coupled with the use of isobaric tags. This study provides an expanded list of the proteins that may be involved in germination of the B. anthracis spore and their relative levels during germination.

Nanoscale exploration of microbial surfaces using the atomic force microscope

Atomic force microscopy (AFM) has recently opened a variety of novel possibilities for imaging and manipulating microbial surfaces in their native environment. While AFM imaging offers a means to visualize surface structures at high resolution and in physiological conditions, AFM force spectroscopy enables researchers to probe a variety of properties, including the unfolding pathways of single-membrane proteins, the elasticity of cell walls and surface macromolecules, and the molecular forces responsible for cell–cell and cell–solid interactions. These nanoscale analyses enable us to answer a number of questions that were difficult to address previously, such as: how does the surface architecture of microbes change as they grow or interact with antibiotics; what is the force required to unfold and extract a single membrane protein; and what are the molecular forces driving the interaction between a pathogen and a host or biomaterial surface? This review will expand on these issues.

Morphogenesis of the Bacillus anthracis spore

Bacillus spp. and Clostridium spp. form a specialized cell type, called a spore, during a multistep differentiation process that is initiated in response to starvation. Spores are protected by a morphologically complex protein coat. The Bacillus anthracis coat is of particular interest because the spore is the infective particle of anthrax. We determined the roles of several B. anthracis orthologues of Bacillus subtilis coat protein genes in spore assembly and virulence. One of these, cotE, has a striking function in B. anthracis: it guides the assembly of the exosporium, an outer structure encasing B. anthracis but not B. subtilis spores. However, CotE has only a modest role in coat protein assembly, in contrast to the B. subtilis orthologue. cotE mutant spores are fully virulent in animal models, indicating that the exosporium is dispensable for infection, at least in the context of a cotE mutation. This has implications for both the pathophysiology of the disease and next-generation therapeutics. CotH, which directs the assembly of an important subset of coat proteins in B. subtilis, also directs coat protein deposition in B. anthracis. Additionally, however, in B. anthracis, CotH effects germination; in its absence, more spores germinate than in the wild type. We also found that SpoIVA has a critical role in directing the assembly of the coat and exosporium to an area around the forespore. This function is very similar to that of the B. subtilis orthologue, which directs the assembly of the coat to the forespore. These results show that while B. anthracis and B. subtilis rely on a core of conserved morphogenetic proteins to guide coat formation, these proteins may also be important for species-specific differences in coat morphology. We further hypothesize that variations in conserved morphogenetic coat proteins may play roles in taxonomic variation among species.

Targeting proteins to the cell wall of sporulating Bacillus anthracis

Dormant spores of Bacillus anthracis germinate during host infection and their vegetative growth and dissemination precipitate anthrax disease. Upon host death, bacilli engage a developmental programme to generate infectious spores within carcasses. Hallmark of sporulation in Bacillus spp. is the formation of an asymmetric division septum between mother cell and forespore compartments. We show here that sortase C (SrtC) cleaves the LPNTA sorting signal of BasH and BasI, thereby targeting both polypeptides to the cell wall of sporulating bacilli. Sortase substrates are initially produced in different cell compartments and at different developmental stages but penultimately decorate the envelope of the maturing spore. srtC mutants appear to display no defect during the initial stages of infection and precipitate lethal anthrax disease in guinea pigs at a similar rate as wild-type B. anthracis strain Ames. Unlike wild-type bacilli, srtC mutants do not readily form spores in guinea pig tissue or sheep blood unless their vegetative forms are exposed to air.

Requirements for the Development of Bacillus Anthracis Spore Reference Materials Used to Test Detection Systems

Bacillus anthracis spores have been used as biological weapons and the possibility of their further use requires surveillance systems that can accurately and reliably detect their presence in the environment. These systems must collect samples from a variety of matrices, process the samples, and detect the spores. The processing of the sample may include removal of inhibitors, concentration of the target, and extraction of the target in a form suitable for detection. Suitable reference materials will allow the testing of each of these steps to determine the sensitivity and specificity of the detection systems. The development of uniform and well-characterized reference materials will allow the comparison of different devices and technologies as well as assure the continued performance of detection systems. This paper discusses the special requirements of reference materials for Bacillus anthracis spores that could be used for testing detection systems. The detection of Bacillus anthracis spores is based on recognition of specific characteristics (markers) on either the spore surface or in the nucleic acids (DNA). We have reviewed the specific markers and their relevance to characterization of reference materials. We have also included the approach for the characterization of candidate reference materials that we are developing at the NIST laboratories. Additional applications of spore reference materials would include testing sporicidal treatments, techniques for sampling the environment, and remediation of spore-contaminated environments.

Characterization of the Bacillus subtilis spore morphogenetic coat protein CotO

Bacillus spores are protected by a structurally and biochemically complex protein shell composed of over 50 polypeptide species, called the coat. Coat assembly in Bacillus subtilis serves as a relatively tractable model for the study of the formation of more complex macromolecular structures and organelles. It is also a critical model for the discovery of strategies to decontaminate B. anthracis spores. In B. subtilis, a subset of coat proteins is known to have important roles in assembly. Here we show that the recently identified B. subtilis coat protein CotO (YjbX) has an especially important morphogenetic role. We used electron and atomic force microscopy to show that CotO controls assembly of the coat layers and coat surface topography as well as biochemical and cell-biological analyses to identify coat proteins whose assembly is CotO dependent. cotO spores are defective in germination and partially sensitive to lysozyme. As a whole, these phenotypes resemble those resulting from a mutation in the coat protein gene cotH. Nonetheless, the roles of CotH and CotO and the proteins whose assembly they direct are not identical. Based on fluorescence and electron microscopy, we suggest that CotO resides in the outer coat (although not on the coat surface). We propose that CotO and CotH participate in a late phase of coat assembly. We further speculate that an important role of these proteins is ensuring that polymerization of the outer coat layers occurs in such a manner that contiguous shells, and not unproductive aggregates, are formed.

Differentiation of spores of Bacillus subtilis grown in different media by elemental characterization using time-of-flight secondary ion mass spectrometry

We demonstrate the use of time-of-flight secondary ion mass spectrometry (TOF-SIMS) in a forensics application to distinguish Bacillus subtilis spores grown in various media based on the elemental signatures of the spores. Triplicate cultures grown in each of four different media were analyzed to obtain TOF-SIMS signatures comprised of 16 elemental intensities. Analysis of variance was unable to distinguish growth medium types based on 40Ca-normalized signatures of any single normalized element. Principal component analysis proved successful in separating the spores into groups consistent with the media in which they were prepared. Confusion matrices constructed using nearest-neighbor classification of the PCA scores confirmed the predictive utility of TOF-SIMS elemental signatures in identifying sporulation medium. Theoretical calculations based on the number and density of spores in an analysis area indicate an analytical sample size of about 1 ng, making this technique an attractive method for bioforensics applications.

Atomic force microscopy of Bacillus spore surface morphology

Bacillus spore surface morphology was imaged with atomic force microscopy (AFM) to determine if characteristic surface features could be used to distinguish between four closely related species; Bacillus anthracis Sterne strain, Bacillus thuringiensis var. kurstaki, Bacillus cereus strain 569, and Bacillus globigii var. niger. AFM surface height images showed an irregular topography across the curved upper surface of the spores. Phase images showed a superficial grain structure with different levels of phase contrast and significant differences in average surface morphologies among the four species. Although spores of the same species showed similarities, there was significant variability within each species. Overall, AFM revealed that spore surface morphology is rich with information, which can be used to distinguish a sample of about 20 spores from a similar number of spores of closely related species. Statistical analysis of spore morphology from a combination of amplitude and phase images for a small sample allows differentiation between, B. anthracis and its close relatives.

TheBacillus subtilisspore coat protein interaction network

Bacterial spores are surrounded by a morphologically complex, mechanically flexible protein coat, which protects the spore from toxic molecules. The interactions among the over 50 proteins that make up the coat remain poorly understood. We have used cell biological and protein biochemical approaches to identify novel coat proteins in Bacillus subtilis and describe the network of their interactions, in order to understand coat assembly and the molecular basis of its protective functions and mechanical properties. Our analysis characterizes the interactions between 32 coat proteins. This detailed view reveals a complex interaction network. A key feature of the network is the importance of a small subset of proteins that direct the assembly of most of the coat. From an analysis of the network topology, we propose a model in which low-affinity interactions are abundant in the coat and account, to a significant degree, for the coat's mechanical properties as well as structural variation between spores.

Imaging and analysis of Bacillus anthracis spore germination

External and internal changes occurring during the process of germination of Bacillus anthracis spores were observed through atomic force microscopy (AFM) and transmission electron microscopy (TEM), respectively. AFM studies showed that in response to L-alanine (4 mM), as a germinant, the spore germinates into a vegetative cell in 3 hours. The temporal size changes occurring during the germination were gradual but the major change in size was observed between the second and third hour. TEM of spores showed the presence of varied layers, which is in accordance with previous studies. However, the integrity of these layers was lost gradually during the process of germination. The inner spore membrane remains intact even until late stages of germination, whereas the coat, outer spore membrane, and the cortical layers are discarded at the second-hour stage. The results indicate that sequential changes during the germination of a B. anthracis spore are similar to other species of the Bacillus group.

Architecture and high-resolution structure of Bacillus thuringiensis and Bacillus cereus spore coat surfaces

We have utilized atomic force microscopy (AFM) to visualize the native surface topography and ultrastructure of Bacillus thuringiensis and Bacillus cereus spores in water and in air. AFM was able to resolve the nanostructure of the exosporium and three distinctive classes of appendages. Removal of the exosporium exposed either a hexagonal honeycomb layer (B. thuringiensis) or a rodlet outer spore coat layer (B. cereus). Removal of the rodlet structure from B. cereus spores revealed an underlying honeycomb layer similar to that observed with B. thuringiensis spores. The periodicity of the rodlet structure on the outer spore coat of B. cereus was approximately 8 nm, and the length of the rodlets was limited to the cross-patched domain structure of this layer to approximately 200 nm. The lattice constant of the honeycomb structures was approximately 9 nm for both B. cereus and B. thuringiensis spores. Both honeycomb structures were composed of multiple, disoriented domains with distinct boundaries. Our results demonstrate that variations in storage and preparation procedures result in architectural changes in individual spore surfaces, which establish AFM as a useful tool for evaluation of preparation and processing "fingerprints" of bacterial spores. These results establish that high-resolution AFM has the capacity to reveal species-specific assembly and nanometer scale structure of spore surfaces. These species-specific spore surface structural variations are correlated with sequence divergences in a spore core structural protein SspE.

The high-resolution architecture and structural dynamics of Bacillus spores

The capability to image single microbial cell surfaces at nanometer scale under native conditions would profoundly impact mechanistic and structural studies of pathogenesis, immunobiology, environmental resistance, and biotransformation. Here, using in vitro atomic force microscopy, we have directly visualized high-resolution native structures of bacterial endospores, including the exosporium and spore coats of four Bacillus species in air and water environments. Our results demonstrate that the mechanisms of spore coat self-assembly are similar to those described for inorganic and macromolecular crystallization. The dimensions of individual Bacillus atrophaeus spores decrease reversibly by 12% in response to a change in the environment from fully hydrated to air-dried state, establishing that the dormant spore is a dynamic physical structure. The interspecies distributions of spore length and width were determined for four species of Bacillus spores in water and air environments. The dimensions of individual spores differ significantly depending upon species, growth regimes, and environmental conditions. These findings may be useful in the reconstruction of environmental and physiological conditions during spore formation and for modeling the inhalation and dispersal of spores. This study provides a direct insight into molecular architecture and structural variability of bacterial endospores as a function of spatial and developmental organizational scales.

Unmasking novel sporulation genes in Bacillus subtilis

The Bacillus subtilis transcription factor sigma(E) directs the expression of a regulon of 262 genes, but null mutations in only a small fraction of these genes severely impair sporulation. We have previously reported that mutations in seven sigma(E)-controlled genes cause a mild (2- to 10-fold) defect in sporulation. In this study, we found that pairwise combinations of some of these seven mutations led to strong synthetic sporulation phenotypes, especially those involving the ytrHI operon and ybaN. Double mutants of ybaN and ytrH and of ybaN and ytrI had >10,000-fold lower sporulation efficiencies than the wild type. Thin-section electron microscopy revealed a block in cortex formation for the ybaN ytrH double mutant and coat defects for the ybaN single and ybaN ytrI double mutants. Sporulating cells of a ybaN ytrI double mutant and of a ybaN ytrHI triple mutant exhibited a pronounced loss of dipicolinic acid (DPA) between hours 8 and 24 of sporulation, in contrast to the constant levels seen for the wild type. An analysis of the spore cortex peptidoglycans of the ybaN ytrI and ybaN ytrHI mutants showed striking decreases in the levels of total muramic acid by hour 24 of sporulation. These data, along with the loss of DPA in the mutants, suggest that the developing spores were unstable and that the cortex underwent degradation late in sporulation. The existence of otherwise hidden sporulation pathways indicates that functional redundancy may mask the role of hitherto unrecognized sporulation genes.

From fundamental studies of sporulation to applied spore research

Sporulation in the Gram-positive bacterium, Bacillus subtilis, has been used as an excellent model system to study cell differentiation for almost half a century. This research has given us a detailed picture of the genetic, physiological and biochemical mechanisms that allow bacteria to survive harsh environmental conditions by forming highly robust spores. Although many basic aspects of this process are now understood in great detail, including the crystal and NMR structures of some of the key proteins and their complexes, bacterial sporulation still continues to be a highly attractive model for studying various cell processes at a molecular level. There are several reasons for such scientific interest. First, some of the complex steps in sporulation are not fully understood and/or are only described by 'controversial' models. Second, intensive research on unicellular development of a single microorganism, B. subtilis, left us largely unaware of the multitude of diverse sporulation mechanisms in many other Gram-positive endospore and exospore formers. This diversity would likely be increased if we were to include sporulation processes in the Gram-negative spore formers. Spore formers have great potential in applied research. They have been used for many years as biodosimeters and as natural insecticides, exploited in the industrial production of enzymes, antibiotics, used as probiotics and, more, exploited as possible vectors for drug delivery, vaccine antigens and other immunomodulating molecules. This report describes these and other aspects of current fundamental and applied spore research that were presented at European Spores Conference held in Smolenice Castle, Slovakia, June 2004.