Unraveling the Role of Red:Blue LED Lights on Resource Use Efficiency and Nutritional Properties of Indoor Grown Sweet Basil

Producing Enhanced Yield and Nutritional Pigmentation in Lollo Rosso Through Manipulating the Irradiance, Duration, and Periodicity of LEDs in the Visible Region of Light

Pigmented food are an important part of the human diet, and anthocyanins have demonstrable protection against tumor production in mouse models and beneficial effects on human liver chemistry. As such, producing pigmented crops is important for a nutritionally diverse diet. Lollo rosso lettuce is a fast-growing pigmented plant, is rich in phenolic compounds, and represents a suitable system to test optimization strategies for yield and anthocyanin production. High-energy UV wavebands are often used to stimulate increased pigmentation; however, we hypothesized that optimizing visible wavebands would deliver both yield and quality improvements. Growing Lollo rosso under irradiances between 5 and 180 W m-2 using visible waveband LEDs produced 0.4 g fresh weight per W m-2 in the linear portion of the curve between 5 and 40 W m-2 and achieved an approximate asymptote of 20 g fresh weight at around 100-120 W m-2 for yield. Anthocyanin content increased linearly with irradiance. We attempted to optimize the visible wavebands by supplementing half the asymptotic energy for 15 days with supplemental red (R) or blue (B) wavebands in the peaks of photosynthetic activity (430-460 and 630-660 nm). R and B affected rosette morphology with no significant impact on yield, but B significantly increased anthocyanin content by 94% compared to R. We therefore focused on further optimizing B by shortening the daily duration of supplemental B. The minimum B treatment that lacked significant pigment induction was 1 h. We hypothesized that short durations would be more active at different times in the diurnal cycle. Supplemental B was applied for 2 h at four different times. A night-break with B produced the highest yield and anthocyanin content. Our research demonstrates new ways to efficiently use readily available LEDs within the PAR wavebands to increase both yield and crop quality in controlled environment agriculture.

Modelling of Soybean (Glycine max (L.) Merr.) Response to Blue Light Intensity in Controlled Environments

Low photosynthetic photon flux density (PPFD) under shade is associated with low blue photon flux density (BPFD), which independent from PPFD can induce shade responses, e.g., elongation growth. In this study, the response of soybean to six levels of BPFD under constant PPFD from LED lighting was investigated with regard to morphology, biomass and photosynthesis to increase the knowledge for optimizing the intensity of BPFD for a speed breeding system. The results showed that low BPFD increased plant height, leaf area and biomass and decreased leaf mass ratio. Photosynthetic rate and internode diameter were not influenced. A functional structural plant model of soybean was calibrated with the experimental data. A response function for internode length to the perceived BPFD by the internodes was derived from simulations and integrated into the model. With the aim to optimize lighting for a speed breeding system, simulations with alternative lighting scenarios indicated that decreasing BPFD during the growth period and using different chamber material with a higher reflectance could reduce energy consumption by 7% compared to the experimental setup, while inducing short soybean plants.

Response of Basil Growth and Morphology to Light Intensity and Spectrum in a Vertical Farm

Vertical farming is becoming increasingly popular for production of leafy vegetables and herbs, with basil (Ocimum basilicum L.) as one of the most popular herbs. In basil most research has focused on increasing secondary metabolites with light spectra. However, knowledge about the effect of light intensity (photosynthetic photon flux density, PPFD) and spectra on growth and morphology is key for optimizing quality at harvest. The impact of PPFD and spectrum on plant growth and development is species dependent and currently few studies in basil are available. Understanding the response to End-Of-Production (EOP) light of growth and morphology is important for successful vertical farming. We performed a comprehensive series of experiments, where the effects of EOP PPFD, fraction of blue and their interaction on the growth and morphology were analyzed in two green and one purple basil cultivar. In addition, the impact of different EOP intensities and duration of far-red were investigated. We found that increasing the PPFD increased fresh mass, dry matter content and plant height in all three cultivars. The responses were linear or quadratic depending on the cultivar. A high fraction of blue (>90%) increased plant height and decreased the dry mass partitioning to the leaves. The only interaction found between the fraction of blue and overall PPFD was on plant height in the green cultivar whereas other growth parameters and morphology responded stronger to PPFD than to the fraction of blue light. Plant dry matter production was increased with the addition of far-red. Far-red EOP intensity treatments enhanced the fraction of dry mass partitioned to the leaves, whereas a prolonged far-red treatment enhanced partitioning to the stem. Both plant fresh mass and dry matter content were improved by applying high PPFD shortly before harvest. Light spectra were found to be of less importance than PPFD with respect to plant dry matter content. Light use efficiency (LUE) based on fresh mass decreased with increasing PPFD whereas LUE based on dry mass increased with increasing PPFD, when given as EOP treatments. The overall physiological mechanisms of the light intensity and spectral effects are discussed.

Leaf development and energy yield of hydroponic sweetpotato seedlings using single-node cutting as influenced by light intensity and LED spectrum

Vine cuttings with six to eight unfolded leaves are utilized as is conventional in sweetpotato (Ipomoea batatas (L.) Lam.) seedling production. However, most vine cuttings wilt after transplanting into the field. Moreover, few researchers have examined the influence of photon flux density (PFD) provided by white or white plus red light-emitting diodes (LEDs) on sweetpotato plantlets. In this study, hydroponic sweetpotato (cv. Beniharuka) seedlings using single-node cutting were grown under 20 combinations of five levels of PFDs of 150, 200, 250, 300, and 350 μmol m^-2 d^-1 and four light qualities: white LEDs with a red light to blue light ratio (R:B ratio) of 0.9, white plus red LEDs with R:B ratios of 1.2 and 2.2, respectively, and fluorescent lamp with an R:B ratio of 1.8 as control, for 20 days under a controlled enviroment. Results showed that the number of newly developed leaves on hydroponic sweetpotato seedlings increased with time in a quadratic function, regardless of light quality. Fluorescent lamps led to greater numbers of new leaves on hydroponic sweetpotato seedlings compared with those grown under LEDs. Plant height, leaf area, and fresh and dry weights increased initially and then decreased with increasing daily light integral (DLI) in quadratic funcitons with a highest value under a PFD of 250 μmol m^-2 d^-1. However, no significant differences were observed in fresh and dry weights of hydroponic sweetpotato seedlings grown under PFDs of 200 and 250 μmol m^-2 s^-1. The quantum yield of photosystem II (ФPSII) decreased linearly as DLI increased from 8.6-20.2 mol m^-2 d^-1. Power consumptions based on fresh and dry weights were lowest in sweetpotato seedlings grown under a PFD of 200 μmol m^-2 s^-1 provided by white LEDs with an R:B ratio of 0.9. White LEDs also showed higher light energy use efficiency than white plus red LEDs. In summary, it is recommended that a PFD of 200 μmol m^-2 s^-1 with DLI at 11.5 mol m^-2 d^-1 provided by white LEDs with an R:B ratio of 0.9 is suitable for hydroponic sweetpotato (cv. Beniharuka) seedling production under a controlled environment.

Blue:Red LED Light Proportion Affects Vegetative Parameters, Pigment Content, and Oxidative Status of Einkorn (Triticum monococcum L. ssp. monococcum) Wheatgrass

This work aimed to study the effect of some light spectra on the growth, oxidative state, and stress of einkorn wheatgrass (Triticum monococcum L. ssp. monococcum). To this end, six light treatments, having the same total incident photon flux density (PFD) of 200 μmol m^-2 s^-1, were applied to einkorn and compared: only blue light; only red; three blue:red combinations, at different proportions of total PFD (75:25%, 50:50%, and 25:75%, respectively); and a wide spectrum, taken as a control treatment, composed of blue (18% of PFD), red (18%), and intermediate wavelengths (64%). Light treatments affected the contents of pigments (chlorophylls and carotenes), hydrogen peroxide (H₂O₂), and malondialdehyde (MDA). These results revealed the changes in the oxidative status of wheatgrass, in response to the different light treatments. However, the dichromatic light with blue ≥50% of the total PFD appeared to be the best combination, guarantying good wheatgrass yield, increasing pigment content, and reducing H₂O₂ and MDA when compared to the other light treatments. Our findings also contribute to explaining the available literature on the effect of these kinds of light on the increase in phenolic compounds and antioxidant activity in einkorn wheatgrass.

Growth Spectrum Complexity Dictates Aromatic Intensity in Coriander (Coriandrum sativum L.)

Advancements in availability and specificity of light-emitting diodes (LEDs) have facilitated trait modification of high-value edible herbs and vegetables through the fine manipulation of spectra. Coriander (Coriandrum sativum L.) is a culinary herb, known for its fresh, citrusy aroma, and high economic value. Studies into the impact of light intensity and spectrum on C. sativum physiology, morphology, and aroma are limited. Using a nasal impact frequency panel, a selection of key compounds associated with the characteristic aroma of coriander was identified. Significant differences (P < 0.05) were observed in the concentration of these aromatics between plants grown in a controlled environment chamber under the same photosynthetic photon flux density (PPFD) but custom spectra: red (100%), blue (100%), red + blue (RB, 50% equal contribution), or red + green + blue (RGB, 35.8% red: 26.4% green: 37.8% blue) wavelengths. In general, the concentration of aromatics increased with increasing numbers of wavelengths emitted alongside selective changes, e.g., the greatest increase in coriander-defining E-(2)-decenal occurred under the RGB spectrum. This change in aroma profile was accompanied by significant differences (P < 0.05) in light saturated photosynthetic CO2 assimilation, water-use efficiency (Wi), and morphology. While plants grown under red wavelengths achieved the greatest leaf area, RB spectrum plants were shortest and had the highest leaf:shoot ratio. Therefore, this work evidences a trade-off between sellable commercial morphologies with a weaker, less desirable aroma or a less desirable morphology with more intense coriander-like aromas. When supplemental trichromatic LEDs were used in a commercial glasshouse, the majority of compounds, with the exception of linalool, also increased showing that even as a supplement additional wavelength can modify the aromatic profile increasing its complexity. Lower levels of linalool suggest these plants may be more susceptible to biotic stress such as herbivory. Finally, the concentration of coriander-defining aromatics E-(2)-decenal and E-(2)-hexenal was significantly higher in supermarket pre-packaged coriander leaves implying that concentrations of aromatics increase after excision. In summary, spectra can be used to co-manipulate aroma profile and plant form with increasing spectral complexity leading to greater aromatic complexity and intensity. We suggest that increasing spectral complexity progressively stimulates signaling pathways giving rise to valuable economic traits.

Role of blue and red light in stomatal dynamic behaviour

Plants experience changes in light intensity and quality due to variations in solar angle and shading from clouds and overlapping leaves. Stomatal opening to increasing irradiance is often an order of magnitude slower than photosynthetic responses, which can result in CO2 diffusional limitations on leaf photosynthesis, as well as unnecessary water loss when stomata continue to open after photosynthesis has reached saturation. Stomatal opening to light is driven by two distinct pathways; the 'red' or photosynthetic response that occurs at high fluence rates and saturates with photosynthesis, and is thought to be the main mechanism that coordinates stomatal behaviour with photosynthesis; and the guard cell-specific 'blue' light response that saturates at low fluence rates, and is often considered independent of photosynthesis, and important for early morning stomatal opening. Here we review the literature on these complicated signal transduction pathways and osmoregulatory processes in guard cells that are influenced by the light environment. We discuss the possibility of tuning the sensitivity and magnitude of stomatal response to blue light which potentially represents a novel target to develop ideotypes with the 'ideal' balance between carbon gain, evaporative cooling, and maintenance of hydraulic status that is crucial for maximizing crop performance and productivity.

Blue Light Treatment but Not Green Light Treatment After Pre-exposure to UV-B Stabilizes Flavonoid Glycoside Changes and Corresponding Biological Effects in Three Different Brassicaceae Sprouts

Ultraviolet-B (UV-B; 280-315 nm) radiation induces the biosynthesis of secondary plant metabolites such as flavonoids. Flavonoids could also be enhanced by blue (420-490 nm) or green (490-585 nm) light. Flavonoids act as antioxidants and shielding components in the plant's response to UV-B exposure. They are shown to quench singlet oxygen and to be reactive to hydroxyl radical. The aim was to determine whether treatment with blue or green light can alter flavonoid profiles after pre-exposure to UV-B and whether they cause corresponding biological effects in Brassicaceae sprouts. Based on their different flavonoid profiles, three vegetables from the Brassicaceae were selected. Sprouts were treated with five subsequent doses (equals 5 days) of moderate UV-B (0.23 kJ m^-2 day^-1 UV-B_BE), which was followed with two subsequent (equals 2 days) doses of either blue (99 μmol m^-2 s^-1) or green (119 μmol m^-2 s^-1) light. In sprouts of kale, kohlrabi, and rocket salad, flavonoid glycosides were identified by HPLC-DAD-ESI-MSⁿ. Both Brassica oleracea species, kale and kohlrabi, showed mainly acylated quercetin and kaempferol glycosides. In contrast, in rocket salad, the main flavonol glycosides were quercetin glycosides. Blue light treatment after the UV-B treatment showed that quercetin and kaempferol glycosides were increased in the B. oleracea species kale and kohlrabi while-contrary to this-in rocket salad, there were only quercetin glycosides increased. Blue light treatment in general stabilized the enhanced concentrations of flavonoid glycosides while green treatment did not have this effect. Blue light treatment following the UV-B exposure resulted in a trend of increased singlet oxygen scavenging for kale and rocket. The hydroxyl radical scavenging capacity was independent from the light quality except for kale where an exposure with UV-B followed by a blue light treatment led to a higher hydroxyl radical scavenging capacity. These results underline the importance of different light qualities for the biosynthesis of reactive oxygen species that intercept secondary plant metabolites, but also show a pronounced species-dependent reaction, which is of special interest for growers.

Resource use efficiency of indoor lettuce (Lactuca sativa L.) cultivation as affected by red:blue ratio provided by LED lighting

LED lighting in indoor farming systems allows to modulate the spectrum to fit plant needs. Red (R) and blue (B) lights are often used, being highly active for photosynthesis. The effect of R and B spectral components on lettuce plant physiology and biochemistry and resource use efficiency were studied. Five red:blue (RB) ratios (0.5-1-2-3-4) supplied by LED and a fluorescent control (RB = 1) were tested in six experiments in controlled conditions (PPFD = 215 μmol m-2 s-1, daylength 16 h). LED lighting increased yield (1.6 folds) and energy use efficiency (2.8 folds) as compared with fluorescent lamps. Adoption of RB = 3 maximised yield (by 2 folds as compared with RB = 0.5), also increasing leaf chlorophyll and flavonoids concentrations and the uptake of nitrogen, phosphorus, potassium and magnesium. As the red portion of the spectrum increased, photosystem II quantum efficiency decreased but transpiration decreased more rapidly, resulting in increased water use efficiency up to RB = 3 (75 g FW L-1 H2O). The transpiration decrease was accompanied by lower stomatal conductance, which was associated to lower stomatal density, despite an increased stomatal size. Both energy and land surface use efficiency were highest at RB ≥ 3. We hereby suggest a RB ratio of 3 for sustainable indoor lettuce cultivation.

How Can Innovation in Urban Agriculture Contribute to Sustainability? A Characterization and Evaluation Study from Five Western European Cities

Compared to rural agriculture, urban agriculture (UA) has some distinct features (e.g., the limited land access, alternative growing media, unique legal environments or the non-production-related missions) that encourage the development of new practices, i.e., “novelties” or “innovations”. This paper aims to (1) identify the “triggers” for novelty production in UA; (2) characterize the different kinds of novelties applied in UA; (3) evaluate the “innovativeness” of those social, environmental and economic novelties; and, (4) estimate the links between novelties and sustainability. The study was based on the evaluation of 11 case studies in four Western European countries (Italy, Germany, France and Spain). The results show that the trigger and origin of new activities can often be traced back to specific problems that initiators were intended to address or solve. In total, we found 147 novelties produced in the 11 case studies. More novelties are produced in the environmental and social dimensions of sustainability than in the economic. In most cases, external stakeholders played an important role in supporting the projects. The analysis further suggests that innovativeness enhances the overall sustainability in urban agriculture projects.

Modelling Environmental Burdens of Indoor-Grown Vegetables and Herbs as Affected by Red and Blue LED Lighting

Notwithstanding that indoor farming is claimed to reduce the environmental pressures of food systems, electricity needs are elevated and mainly associated with lighting. To date, however, no studies have quantified the environmental and economic profile of Light Emitting Diodes (LED) lighting in indoor farming systems. The goal of this study is to quantify the effect of varying the red (R) and blue (B) LED spectral components (RB ratios of 0.5, 1, 2, 3 and 4) on the eco-efficiency of indoor production of lettuce, chicory, rocket and sweet basil from a life cycle perspective. The functional unit of the assessment was 1 kg of harvested fresh plant edible product, and the International Reference Life Cycle Data System (ILCD) method was employed for impact assessment. Even though most of the materials of the LED lamp and electronic elements were imported from long distances (14,400 km), electricity consumption was the largest contributor to the environmental impacts (with the LED lamps being the main electricity consumers, approximately 70%), apart from the resources use indicator, where the materials of the lamps and the mineral nutrients were also relevant. RB0.5 was the most energy-efficient light treatment but had the lowest eco-efficiency scores due to the lower crop yields.