Preparation and Modification of Biochar Materials and their Application in Soil Remediation

Review of organic and inorganic pollutants removal by biochar and biochar-based composites

Biochar (BC) has exhibited a great potential to remove water contaminants due to its wide availability of raw materials, high surface area, developed pore structure, and low cost. However, the application of BC for water remediation has many limitations. Driven by the intense desire of overcoming unfavorable factors, a growing number of researchers have carried out to produce BC-based composite materials, which not only improved the physicochemical properties of BC, but also obtained a new composite material which combined the advantages of BC and other materials. This article reviewed previous researches on BC and BC-based composite materials, and discussed in terms of the preparation methods, the physicochemical properties, the performance of contaminant removal, and underlying adsorption mechanisms. Then the recent research progress in the removal of inorganic and organic contaminants by BC and BC-based materials was also systematically reviewed. Although BC-based composite materials have shown high performance in inorganic or organic pollutants removal, the potential risks (such as stability and biological toxicity) still need to be noticed and further study. At the end of this review, future prospects for the synthesis and application of BC and BC-based materials were proposed. This review will help the new researchers systematically understand the research progress of BC and BC-based composite materials in environmental remediation.

Enhanced adsorption of polystyrene nanoplastics (PSNPs) onto oxidized corncob biochar with high pyrolysis temperature

Plastic pollution has become a global threat in the natural environment, and an urgent remedial measure is needed to reduce the negative effects caused by plastic pollutants. In the current study, the effects of pyrolysis temperature (500 °C, 700 °C, and 900 °C) and aging on the adsorption of polystyrene nanoplastics (PSNPs) onto corncob biochar were systematically assessed with kinetic, isotherm, pH-dependent adsorption experiments, FTIR and XPS spectroscopy, and DLVO calculations. The oxidation was done with 5% of HNO₃/H₂SO₄ to simulate long-term oxidative aging of biochar in the environment. The results showed that the specific surface area, hydrophobicity, and aromaticity of biochar increased with pyrolysis temperature, whereas the specific surface area and amounts of oxygen-containing groups increased after oxidation. The adsorption mechanism of PSNPs onto the biochar was explored based on the correlation between biochar properties and adsorption parameters derived from adsorption isotherms. Overall, the adsorption capacity of biochar for PSNPs increased with increased pyrolysis temperature and after aging. While the increase of specific surface area was considered the major factor leading to the increase of the adsorption, the variation in surface properties also played an important role. Pore filling, hydrophobic interaction, and hydrogen bonding may all be involved in PSNPs adsorption to biochar. However, the hydrophobic interaction might be more important for the fresh biochar, whereas hydrogen bonding involving oxygen-containing groups might make a bigger contribution to PSNPs adsorption to oxidized biochar. The pH experiments revealed that PSNPs adsorption decreased in general with the increase of pH, indicating that electrostatic repulsion played a vital role in the PSNPs adsorption process. The results of this study indicate that biochar can be potentially applied to immobilize plastic particles in terrestrial ecosystems such as in soil or groundwater, and the immobilization could be enhanced via artificial oxidation or aging of biochar in the natural environment.

Engineered biochars for recovering phosphate and ammonium from wastewater: A review

Biochar has gained great scientific attention as a promising agent for agricultural and environmental applications. A variety of biochars with excellent properties such as high porosity, surface area and functional groups have been developed for nutrients recovery from wastewater. Compared to pristine biochar, engineered biochar with enlarged surface area and abundant functional groups has been prepared which shows a new type of carbon-based material with enhanced adsorption potential for nutrients in wastewater. To date, a few reviews have been specifically focused on several important aspects of engineered biochar, such as its application to recover phosphate and ammonium from wastewater and subsequent use as a slow-release fertilizer. In this work, novel modification/treatment methods including activation with acid/alkali, functionalization with amides, thiols and oxidizing agents, metal salt impregnation, loading with various minerals and carbon-based materials are reviewed for preparing engineered biochar with improved adsorption capacity. Various sources of biomass for producing biochars were estimated, and the intrinsic characteristics and potential of biochar products for simultaneous recovery/removal of phosphate and ammonium from wastewater were evaluated. Relevant interaction mechanisms of phosphate and ammonium adsorption on engineered biochars have been discussed in details. Finally, important future prospects as well as industrial/commercial-scale application of engineered biochars for phosphate and ammonium recovery from wastewater have been emphasized. We believe that this review will provide broad scientific opportunities for thorough understanding of applying engineered biochar as a low-cost and environmentally sustainable material for nutrients recovery from wastewater.

Integrated application effects of biochar and plant residue on ammonia loss, heavy metal immobilization, and estrogen dissipation during the composting of poultry manure

Inadequate handling of poultry manure can cause significant releases of NH₃, heavy metals, and estrogen, thereby impairing environmental quality. This study was a composting experiment involving the combination of poultry manure with plant residues (corn stalks, mushroom residues, and vegetable straw), as well as with either wheat stalk biochar (WB) or rice husk biochar (RB). The integrated effects of plant residues and biochar on NH₃ loss, heavy metal (Cu, Zn, As, and Cd) stabilization, and 17β-estradiol (E2) dissipation were investigated during composting. The poultry manure co-composted with corn straw and mushroom residue showed the highest potential for E2 degradation. Biochar enhanced E2 dissipation and decreased estrogenic activity in all treatments, with RB showing a stronger effect than WB. Both biochars decreased microbial diversity and increased bacterial groups related to E2 and organic matter degradation·NH₃ emission was reduced by 50-82% with 15% WB and 86-97% with 15% RB. The extractable fraction of As was reduced by 0-53% with WB and 50-84% with RB, while that of Cd was reduced by 5-28% for WB and 25-41% for RB in poultry manure compost. However, biochar showed little effect on Cu and Zn. Biochar appears to have a promotional effect and enhances the microbial degradation of E2. Specifically, the integration of corn stalks, mushroom residues, and RB in poultry manure compost had a positive effect by preventing nitrogen loss while reducing the bioavailability of heavy metals and hormones.

The Occurrence of Legacy P Soils and Potential Mitigation Practices Using Activated Biochar

The long-term application of manures in watersheds with dense animal production has increased soil phosphorus (P) concentration, exceeding plant and soil assimilative capacities. The P accumulated in soils that are heavily manured and contain excess extractable soil P concentrations is known as legacy P. Runoff and leaching can transport legacy P to ground water and surface water bodies, contributing to water quality impairment and environmental pollution, such as eutrophication. This review article analyzes and discusses current and innovative management practices for soil legacy P. Specifically, we address the use of biochar as an emerging novel technology that reduces P movement and bioavailability in legacy P soils. We illustrate that properties of biochar can be affected by pyrolysis temperature and by various activating chemical compounds and by-products. Our approach consists of engineering biochars, using an activation process on poultry litter feedstock before pyrolysis to enhance the binding or precipitation of legacy P. Finally, this review article describes previous examples of biochar activation and offers new approaches to the production of biochars with enhanced P sorption capabilities.

Fungi and biochar applications in bioremediation of organic micropollutants from aquatic media

The conventional wastewater treatment system such as bacteria, is not able to remove recalcitrant micropollutants effectively. While, fungi have shown high capacity in degradation of recalcitrant compounds. Biochar, on the other hand, has gained attention in water and wastewater treatment as a low cost and sustainable adsorbent. This paper aims to review the recent applications of three major fungal divisions including Basidiomycota, Ascomycota, and Mucoromycotina, in organic micropollutants removal from wastewater. Moreover, it presents an insight into fungal bioreactors, fungal biofilm and immobilization system. Biochar adsorption capacities for organic micropollutants removal under different operating conditions are summarized. Finally, few recommendations for further research are established in the context of the combination of fungal biofilm with the technologies relying on the adsorption by porous carbonaceous materials.

Recent advances in biochar engineering for soil contaminated with complex chemical mixtures: Remediation strategies and future perspectives

Heavy metal/metalloids (HMs) and polycyclic aromatic hydrocarbons (PAHs) in soil have caused serious environmental problems, compromised agriculture quality, and have detrimental effects on all forms of life including humans. There is a need to develop appropriate and effective remediation methods to resolve combined contaminated problems. Although conventional technologies exist to tackle contaminated soils, application of biochar as an effective renewable adsorbent for enhanced bioremediation is considered by many scientific researchers as a promising strategy to mitigate HM/PAH co-contaminated soils. This review aims to: (i) provide an overview of biochar preparation and its application, and (ii) critically discuss and examine the prospects of (bio)engineered biochar for enhancing HMs/PAHs co-remediation efficacy by reducing their mobility and bioavailability. The adsorption effectiveness of a biochar largely depends on the type of biomass material, carbonisation method and pyrolysis conditions. Biochar induced soil immobilise and remove metal ions via various mechanisms including electrostatic attractions, ion exchange, complexation and precipitation. PAHs remediation mechanisms are achieved via pore filling, hydrophobic effect, electrostatic attraction, hydrogen bond and partitioning. During last decade, biochar engineering (modification) via biological and chemical approaches to enhance contaminant removal efficiency has garnered greater interests. Hence, the development and application of (bio)engineered biochars in risk management, contaminant management associated with HM/PAH co-contaminated soil. In terms of (bio)engineered biochar, we review the prospects of amalgamating biochar with hydrogel, digestate and bioaugmentation to produce biochar composites.

Evaluation of sewage sludge biochar and modified derivatives as novel SPE adsorbents for monitoring of bisphenol A

Sewage sludge is abundant biomass, the sustainable management of which remains a big issue worldwide. It was demonstrated that pyrolysis of sewage sludge using simple and cost-effective apparatus can produce biochars, suitable for solid-phase extraction applications of hydrophobic analytes. Detailed characterization showed that modification lead to three more hydrophobic and one more hydrophilic sample, compared to the original biochar. All samples were evaluated in the solid-phase extraction of the emerging contaminant Bisphenol A from aqueous solutions. KOH-SSB and KOH/MeOH-SSB exhibited the most promising behavior, with the latter achieving recoveries of 88.1%, at a quantity of 0.1 g at the natural pH of the BPA solution (6.5). The effect of solution pH was insignificant in the range of 4-7, whereas the initial BPA concentration had no effect in the recovery within the range of 1-100 μg L^-1. The mechanism of interaction between the optimum sample and BPA was based on hydrogen bonding and π-π interactions, establishing earlier observations that the type (and not concentration) of individual surface groups and the total surface area play a significant role in the process.

Recent Developments in Understanding Biochar’s Physical–Chemistry

Biochar is a porous material obtained by biomass thermal degradation in oxygen-starved conditions. It is nowadays applied in many fields. For instance, it is used to synthesize new materials for environmental remediation, catalysis, animal feeding, adsorbent for smells, etc. In the last decades, biochar has been applied also to soils due to its beneficial effects on soil structure, pH, soil organic carbon content, and stability, and, therefore, soil fertility. In addition, this carbonaceous material shows high chemical stability. Once applied to soil it maintains its nature for centuries. Consequently, it can be considered a sink to store atmospheric carbon dioxide in soils, thereby mitigating the effects of global climatic changes. The literature contains plenty of papers dealing with biochar’s environmental effects. However, a discrepancy exists between studies dealing with biochar applications and those dealing with the physical-chemistry behind biochar behavior. On the one hand, the impression is that most of the papers where biochar is tested in soils are based on trial-and-error procedures. Sometimes these give positive results, sometimes not. Consequently, it appears that the scientific world is divided into two factions: either supporters or detractors. On the other hand, studies dealing with biochar’s physical-chemistry do not appear helpful in settling the factions’ problem. This review paper aims at collecting all the information on physical-chemistry of biochar and to use it to explain biochar’s role in different fields of application.

Conversion of sewage sludge into biochar: A potential resource in water and wastewater treatment

Production of biochar from sewage sludge (SS) is consistent with the goal of sustainable resource recovery and promotes a wastewater-based circular economy. Thermochemical conversion of SS to biochar resolves two major issues simultaneously as it minimizes the cost of disposal and acts as a resource to eliminate the toxic contaminants from water and wastewater. The reusability and ready availability of the biochar, irrespective of the season, makes it an economically viable material for wastewater treatment. In this review, explicit insights into the production, modification and usage of SS derived biochar are provided including (i) the production yield, (ii) characteristic features such as physical, chemical, electrochemical and morphological aspects, and (iii) impact on contaminant removal through adsorption, catalytic and electrochemical processes. Particular attention is given to the use of SS derived biochar as an adsorbent for contaminants present in wastewaters, the potential use of biochar as a catalyst and support material in advanced oxidation processes and the use of biochars as an electrode material. The effect of pyrolysis conditions and co-pyrolysis with other materials on biochar properties is explored and insight is provided into the toxicity of biochar components present at different process conditions.

Modification on biochars for applications: A research update

Biochars are the solid product of biomass under pyrolysis or gasification treatment, whose wholesale prices are lower than commercial activated carbons and other fine materials now in use. The employment of biochars as a renewable resource for field applications, if feasible, would gain apparent economic niche. Modification using physical or chemical protocol to revise the surface properties of biochar for reaching enhanced performances of target application has attracted great research interests. This article provided an overview of biochar application, particularly with the respect to the use of modified biochar as preferred soil amendment, adsorbent, electrochemical material, anaerobic digestion promotor, and catalyst. Based on literature works the current research trends and the prospects and research needs were outlined.

Can biochar reclaim coal mine spoil?

Surface coal mining activities completely destroy vegetation cover, soil and biodiversity. The aftermaths include huge coal mine spoil dumps, changed topography, drainage and landscape, deteriorated aesthetics and increased pollution load. These coal mine spoils are characterised by high rock fragments, extremely low water holding capacity, compacted and high bulk density, lack of organic carbon and plant nutrients, low cation exchange capacity, acidic pH and toxic metal contamination, which poses difficulties in reclamation. An array of studies has been focused on the sustainable use of biochar for restoration of degraded agricultural soil by improving the soil physicochemical, nutritional and biological properties. Although a volume of studies has been done on biochar application, its specialised application in reclamation of coal mine spoils is still atypical, also a systematic review on the mechanism by which biochar amends the mine spoil is lacking. This review focuses on i) factors affecting the biochar properties, ii) the mechanism involved in altering the physical, chemical and biological properties by biochar, (iii) remediation of potentially toxic elements in soil and restoration of degraded land using biochar, and, iv) highlighting the important aspects to be considered while using biochar for reclamation of coal mine spoil. Biochar prepared at 450 °C from a lignocellulosic rich biomass can be an alternative for reclamation for coal mine spoil. Review also suggested suitable methodologies for bulk production, application and economics of biochar in coal mine spoil reclamation.

Biochar and compost effects on the remediative capacities of Oxalis pes-caprae L. growing on mining technosol polluted by Pb and As

Selection of plant species with a great remediating capacity and a high biomass production is an important step for depolluting soils especially mine soils. Hyperaccumulators are used in phytoextraction for extracting metals from soil to roots and to translocate them to aerial parts. While in phytostabilization that usually requires amendment, metals are accumulated in the plant roots. The purpose of this study is to investigate Oxalis pes-caprae L. tolerance to Pb and As from Pontgibaud mine soil in France amended with compost and/or biochar. Oxalis bulbils were harvested in three sites located around Algiers: (1) an agricultural land in Reghaïa, (2) an area planted with Pines at the USTHB university campus, and (3) the polluted bank of the El Harrach river. The small and medium bulbil sizes were selected from each locality. Concerning the experimental soil, five mixtures of Pontgibaud technosol (P) with amendments compost (C) and biochar (Bc) were prepared: PC, PBc5, PBc10, PBc5 C, PBcC (w/w). The results indicate that amendments alter the soil physico-chemical characteristics and the mobility of metal(loid)s. They also reveal that As and Pb are differently distributed in plant organs. Medium bulbils especially from El Harrach river and the university campus have shown a better growth. Seedlings growth rate has been the highest in Pontgibaud amended with PC and the lowest in PBc10.

Applications of Modified Biochar-Based Materials for the Removal of Environment Pollutants: A Mini Review

The biochar treated through several processes can be modified and utilized as catalyst or catalyst support due to specific properties with various available functional groups on the surface. The functional groups attached to the biochar surface can initiate active radical species to play an important role, which lead to the destruction of contaminants as a catalyst and the removal of adsorbent by involving electron transfer or redox processes. Centering on the high potential to be developed in field applications, this paper reviews more feasible and sustainable biochar-based materials resulting in efficient removals of environmental pollutants as catalyst or support rather than describing them according to the technology category. This review addresses biochar-based materials for utilization as catalysts, metal catalyst supports of iron/iron oxides, and titanium dioxide because the advanced oxidation process using iron/iron oxides or titanium dioxides is more effective for the removal of contaminants. Biochar-based materials can be used for the removal of inorganic contaminants such as heavy meals and nitrate or phosphate to cause eutrophication of water. The biochar-based materials available for the remediation of eutrophic water by the release of N- or P-containing compounds is also reviewed.

Carbon Sequestration in Support of the “4 per 1000” Initiative Using Compost and Stable Biochar from Hazelnut Shells and Sunflower Husks

The achievement of carbon neutrality till 2050 will require the deployment of negative carbon emission technologies like the production and soil incorporation of biochar, produced from pyrolyzed plant-based residues. The carbon sequestration potential of biochar (BC) from hazelnut (Corylus avellana L.) shells (HNS) and sunflower (Helianthus annuus L.) husks (SFH) was evaluated when the biomass was carbonized in a fixed bed reactor, in a rotary kiln and in a screw reactor. In all tested reactors, higher temperatures (>500 °C) and longer retention times increased the C concentration and stability of the biochar, with negligible effects of the reactor type and feedstock. A national case study was developed for Austria concerning the potential use of SFH- and HNS-BC in combination with compost for reaching the “4 per mille” objective. An annual soil organic carbon increase of 2.5 Mt C would be needed, requiring amendment rates of 2.2 Mt C a−1 for all annual crop areas and 0.3 Mt C a−1 for all vineyards and orchards. If compost only were used, the annual cost would be about 200 EUR ha−1 but short-term re-mineralization would have to be considered. If the more recalcitrant biochar were used only, about 2.3 t BC ha−1 would be needed at a cost of 1400–1870 EUR ha−1. The study shows in principle the feasibility of applying compost–biochar mixtures for achieving the “4 per mille” objective but in practice, supplemental soil management strategies for sequestering C will be required.

Improved Food Waste Stabilization and Valorization by Anaerobic Digestion Through Supplementation of Conductive Materials and Trace Elements

The positive effects of conductive material supplementation on anaerobic digestion have been mainly investigated for single synthetic substrates, while its significance for real and complex organic wastes such as food waste has not been sufficiently investigated. This study investigated the effect of conductive material (biochar and magnetite) and trace metal supplementation on the anaerobic digestion of food waste by means of biochemical methane potential assays. The results indicated that the supplementation of biochar and trace metals improved both total biogas production and methane yields. A biochar dose of 2.0 and 5.0 g/L resulted in 11.2 ± 6.5 and 27.3 ± 9.5% increase in biogas and 8.3 ± 6.8 and 33.2 ± 2.8% increase in methane yield, respectively. Moreover, the same reactors demonstrated high food waste stabilization performance of over 80% chemical oxygen demand removal efficiency. These results indicate that biochar supplementation leads to more enhanced anaerobic digestion operation that could be through increased surface area for microbial growth and/or direct interspecies electron transfer mechanism. In turn, food waste will not only be stabilized but also valorized by anaerobic digestion at higher efficiencies that support sustainable waste management through both environmentally safe disposal and value-added generation.

Feasibility study on a new pomelo peel derived biochar for tetracycline antibiotics removal in swine wastewater

Removal of tetracycline antibiotics (TCs) by biochar adsorption is emerging as a cost-effective and environmentally friendly strategy. This study developed a novel pomelo peel derived biochar, which was prepared at 400 °C (BC-400) and 600 °C (BC-600) under nitrogen conditions. To enhance the adsorption capacity, BC-400 was further activated by KOH at 600 °C with a KOH: BC-400 ratio of 4:1. The activated biochar (BC-KOH) displayed a much larger surface area (2457.37 m²/g) and total pore volume (1.14 cm³/g) than BC-400 and BC-600. High adsorption capacity of BC-KOH was achieved for removing tetracycline (476.19 mg/g), oxytetracycline (407.5 mg/g) and chlortetracycline (555.56 mg/g) simultaneously at 313.15 K, which was comparable with other biochars derived from agricultural wastes reported previously. The adsorption data could be fitted by the pseudo-second-order kinetic model and Langmuir isotherm model successfully. The initial solution pH indicated the potential influence of TCs adsorption capacity on BC-KOH. These results suggest that pore filling, electrostatic interaction and π-π interactions between the adsorbent and adsorbate may constitute the main adsorption mechanism. BC-KOH can be used as a potential adsorbent for removing TCs from swine wastewater effectively, cheaply and in an environmentally friendly way.

A critical review of different factors governing the fate of pesticides in soil under biochar application

Pesticides are extensively used in the modern agricultural system. The inefficient and extensive use of pesticides during the last 5 to 6 decades inadvertently led to serious deterioration of environmental quality with health risk to living organisms, including humans. It is important to use some environmentally-friendly and sustainable approaches to remediate, restore and maintain soil quality. Biochar has gained considerable attention globally as a promising soil amendment because it has the ability to adsorb and as such minimize the bioavailability of pesticides in soils. This review emphasizes the recent trends and implications of biochar in pesticide-contaminated soils, as well as highlights need of the pesticides use and associated environmental issues in context of the biochar application. The overarching aim of this review is to signify the role of biochar on primary processes such as effect of biochar on the persistence, mineralization, leaching and efficacy of pesticides in soil. Notably, the effects of biochar on pesticide adsorption-desorption, degradation and bioavailability under various operating/production conditions are critically discussed. This review delineates the indirect impact of biochar on pesticides persistence in soils and proposes key recommendations for future research which are essential for the remediation and restoration of pesticides-impacted soils.

Biochar for delivery of agri-inputs: Current status and future perspectives

Biochar, a carbonaceous porous material produced from the pyrolysis of agricultural residues and solid wastes has been widely used as a soil amendment. Recent publications on biochar are primarily focussed with its application in climatic aspects, contaminant immobilization, soil amendment strategies, nutrient recovery, engineered material production and waste-water treatment. Numerous studies have reported the positive attribute of biochar's nutrient value that helps in improving plant growth and fertilizer use efficiency. The renewability, low-cost, high porosity, high surface area and customizable surface chemistry of biochar offers ample prospect in several engineering applications, some of which needs significant attention. This review aims at systematically assessing the uses of biochar as a potential carrier material for delivery of agrochemicals and microbes. The key parameters of biochar that are crucial to assess the potential of any material to be used for delivery purposes are discussed. The parameters such as the physicochemical properties of biochar, the mechanistic aspects of adsorption and release of agrochemicals and microbes from biochar, comparative assessment of biochar over other carrier materials, long-term effects of biochar and the economic and environmental benefits of biochar are discussed in detail. At the end, a brief perspective has also been laid out to discuss how nano-interventions could further be helpful to tailor biochar properties useful for delivery applications.

Synergistic immobilization of potentially toxic elements (PTEs) by biochar and nanoparticles in alkaline soil

Biochar and nanoparticle (NP) have the ability to sorb potentially toxic elements (PTEs) from soil and reduce toxicity and leaching into water bodies. However, there is need to tailor biochar formulations to soil types. In this study, we investigate the mobility and chemical forms of Cd, Cr, Cu, Ni, and Zn in a spiked, alkaline soil after amendment with combination of NPs (nano-Fe (NF), nano-clay (NC)) and biochars (almond shell 500 °C, walnut shell 400 °C) in different doses (0, 2.5, 5, and 10%). Many previous studies concluded biochar immobilized PTEs due to an increase in soil pH, which can be disregarded here (soil pH 7.9). In a twenty-week column leaching experiment biochar addition significantly decreased PTE leaching and NP addition further immobilized PTEs in most cases. On average almond biochar more effectively reduced Zn leaching and walnut biochar was more effective in decreasing the leaching of Cd, Cr, and Ni (e.g. 5% biochar reduced Cr leaching by 68%). Copper was immobilized effectively by both biochars. Nano-clay combined with walnut biochar performed best in all treatments, in particular for Cd, Ni, and Zn (e.g. 10% walnut biochar only and in combination with NC reduced Zn leaching by 14.2% and 58.5%, respectively). After amendment, PTEs were present in the Fe-Mn oxides, organic and residual fractions and less in the exchangeable fraction, reducing PTE availability and leachability. The results demonstrate that even for cationic PTEs that behave similarly in the environment optimal biochar-mineral formulations can differ.