New Trends in Oxidative Functionalization of Carbon–Hydrogen Bonds: A Review

A Comparative Study of the Catalytic Behaviour of Alkoxy-1,3,5-Triazapentadiene Copper(II) Complexes in Cyclohexane Oxidation

The mononuclear copper complexes [Cu{NH=C(OR)NC(OR)=NH}2] with alkoxy-1,3,5-triazapentadiene ligands that have different substituents (R = Me (1), Et (2), nPr (3), iPr (4), CH2CH2OCH3 (5)) were prepared, characterized (including the single crystal X-ray analysis of 3) and studied as catalysts in the mild oxidation of alkanes with H2O2 as an oxidant, pyridine as a promoting agent and cyclohexane as a main model substrate. The complex 4 showed the highest activity with a yield of products up to 18.5% and turnover frequency (TOF) up to 41 h−1. Cyclohexyl hydroperoxide was the main reaction product in all cases. Selectivity parameters in the oxidation of substituted cyclohexanes and adamantane disclosed a dominant free radical reaction mechanism with hydroxyl radicals as C–H-attacking species. The main overoxidation product was 6-hydroxyhexanoic acid, suggesting the presence of a secondary reaction mechanism of a different type. All complexes undergo gradual alteration of their structures in acetonitrile solutions to produce catalytically-active intermediates, as evidenced by UV/Vis spectroscopy and kinetic studies. Complex 4, having tertiary C–H bonds in its iPr substituents, showed the fastest alteration rate, which can be significantly suppressed by using the CD3CN solvent instead of CH3CN one. The observed process was associated to an autocatalytic oxidation of the alkoxy-1,3,5-triazapentadiene ligand. The deuterated complex 4-d32 was prepared and showed higher stability under the same conditions. The complexes 1 and 4 showed different reactivity in the formation of H218O from 18O2 in acetonitrile solutions.

Tetracopper(II) Cores Driven by an Unexplored Trifunctional Aminoalcohol Sulfonic Acid for Mild Catalytic C–H Functionalization of Alkanes

Three new tetracopper(II) coordination compounds were easily generated from Cu(NO3)2, a trifunctional aminoalcohol sulfonic acid (H3bes, N,N-bis(2-hydroxyethyl)-2-aminoethanesulfonic acid) as a principal building block, and a benzene carboxylic acid as a supporting ligand (i.e., benzoic (Hba), 4-hydroxybenzoic (Hfba), or 3-hydroxybenzoic (Hthba) acid). The obtained microcrystalline products, [Cu4(µ-Hbes)3(µ-H2bes)(µ-L)]·2H2O (L = ba− (1), fhba− (2), and thba− (3)), were fully characterized by FTIR (Fourier-transform infrared spectroscopy), elemental analysis, ESI-MS (Electrospray Ionisation Mass Spectrometry), and single-crystal X-ray diffraction methods. Compounds 1–3 were applied as effective homogeneous catalysts in the oxidative C−H functionalization of alkanes (cycloalkanes and propane). Two different model reactions were explored: (1) mild oxidation of alkanes with hydrogen peroxide to give alcohols and ketones, and (2) mild carboxylation of alkanes with carbon monoxide, water, and potassium peroxodisulfate to give carboxylic acids. For these reactions, effects of different parameters, as well as mechanistic and selectivity characteristics, were studied.

New Oxidovanadium(IV) Complexes with 2,2′-bipyridine and 1,10-phenathroline Ligands: Synthesis, Structure and High Catalytic Activity in Oxidations of Alkanes and Alcohols with Peroxides

Reactions of [VCl3(thf)3] or VBr3 with 2,2′-bipyridine (bpy) or 1,10-phenanthroline (phen) in a 1:1 molar ratio in air under solventothermal conditions has afforded polymeric oxidovanadium(IV) four complexes 1–4 of a general formula [VO(L)X2]n (L = bpy, phen and X = Cl, Br). Monomeric complex [VO(DMF)(phen)Br2] (4a) has been obtained by the treatment of compound 4 with DMF. The complexes were characterized by IR spectroscopy and elemental analysis. The crystal structures of 3 and 4a were determined by an X-ray diffraction (XRD) analysis. The {VOBr2(bpy)} fragments in 3 form infinite chains due to the V = O…V interactions. The vanadium atom has a distorted octahedral coordination environment. Complexes 1–4 have been tested as catalysts in the homogeneous oxidation of alkanes (to produce corresponding alkyl hydroperoxides which can be easily reduced to alcohols by PPh3) and alcohols (to corresponding ketones) with H2O2 or tert-butyl hydroperoxide in MeCN. Compound 1 exhibited the highest activity. The mechanism of alkane oxidation was established using experimental selectivity and kinetic data and theoretical DFT calculations. The mechanism is of the Fenton type involving the generation of HO• radicals.

Heterometallic CoIIIZnII Schiff Base Catalyst for Mild Hydroxylation of C(sp3)–H Bonds of Unactivated Alkanes: Evidence for Dual Mechanism Controlled by the Promoter

The novel Schiff base complex [CoIIIZnIIL3Cl2]·CH3OH (1) was synthesized by interaction of zinc powder, cobalt(II) chloride and methanol solution of the pre-formed HL in air (HL is the product of condensation of o-vanillin and methylamine) and characterized by IR, UV-Vis and NMR spectroscopy, ESI-MS and single crystal X-ray diffraction analysis. In the heterometallic core of 1 the two metal centers are bridged by deprotonated phenoxy groups of the L− ligands with the cobalt-zinc separation of 3.123 Å. Catalytic investigations demonstrated a pronounced activity of 1 towards mild alkane oxidation with m-chloroperbenzoic acid (m-CPBA) as an oxidant and cis-1,2-dimethylcyclohexane (cis-1,2-DMCH) as the model substrate. The influence of the nature of different promoting agents of various acidities (from HOTf to pyridine) on the catalytic process was studied in detail and a pronounced activity of 1 in the presence of nitric acid promoter was found, also showing a high retention of stereoconfiguration of the substrate (>99% for cis-1,2-DMCH). The best achieved yield of tertiary cis-alcohol based on the oxidant was 61%, with a turnover number (TON) of 198 for nitric acid as promoter. The 18O-incorporations into the alcohols when the reactions were performed under 18O2 atmosphere using acetic and nitric acid promoters, suggest that the cis-1,2-DMCH hydroxylation proceeds by two distinct pathways, a non-stereoselective and a stereoselective one (with and without involvement of a long-lived free carbon radical, respectively). The former dominates in the case of acetic acid promoter and the latter is realized in the case of HNO3 promoter.

Palanquin-Like Cu4Na4 Silsesquioxane Synthesis (via Oxidation of 1,1-bis(Diphenylphosphino)methane), Structure and Catalytic Activity in Alkane or Alcohol Oxidation with Peroxides

The self-assembly synthesis of copper-sodium phenylsilsesquioxane in the presence of 1,1-bis(diphenylphosphino)methane (dppm) results in an unprecedented cage-like product: [(PhSiO1,5)6]2[CuO]4[NaO0.5]4[dppmO2]2 1. The most intriguing feature of the complex 1 is the presence of two oxidized dppm species that act as additional O-ligands for sodium ions. Two cyclic phenylsiloxanolate (PhSiO1,5)6 ligands coordinate in a sandwich manner with the copper(II)-containing layer of the cage. The structure of 1 was established by X-ray diffraction analysis. Complex 1 was shown to be a very good catalyst in the oxidation of alkanes and alcohols with hydrogen peroxide or tert-butyl hydroperoxide in acetonitrile solution. Thus, cyclohexane (CyH), was transformed into cyclohexyl hydroperoxide (CyOOH), which could be easily reduced by PPh3 to afford stable cyclohexanol with a yield of 26% (turnover number (TON) = 240) based on the starting cyclohexane. 1-Phenylethanol was oxidized by tert-butyl hydroperoxide to give acetophenone in an almost quantitative yield. The selectivity parameters of the oxidation of normal and branched alkanes led to the conclusion that the peroxides H2O2 and tert-BuOOH, under the action of compound (1), decompose to generate the radicals HO• and tert-BuO• which attack the C-H bonds of the substrate.

Copper(ii) complexes with 2,2′:6′,2′′-terpyridine, 2,6-di(thiazol-2-yl)pyridine and 2,6-di(pyrazin-2-yl)pyridine substituted with quinolines. Synthesis, structure, antiproliferative activity, and catalytic activity in the oxidation of alkanes and alcohols with peroxides

The toxicity of six new Cu(ii) complexes was evaluated in cancer derived cell lines. A model of competitive interaction of hydroxyl radicals with CH₃CN and RH in the catalyst cavity has been proposed.

Vanadium complexes of different nuclearities in the catalytic oxidation of cyclohexane and cyclohexanol – an experimental and theoretical investigation

Catalytic activities of oxidovanadium(v) complexes towards microwave-assisted peroxidative oxidation of cyclohexane and cyclohexanol are explored by experimental and DFT calculations.

In situ synthesis of CuO nanoparticles over functionalized mesoporous silica and their application in catalytic syntheses of symmetrical diselenides

A versatile and novel mesoporous silica supported CuO nanoparticle catalyst (nCuO-FMS) and its application in the syntheses of symmetrical diselenides.

Catalytic Activity of Polynuclear vs. Dinuclear Aroylhydrazone Cu(II) Complexes in Microwave-Assisted Oxidation of Neat Aliphatic and Aromatic Hydrocarbons

One-dimensional (1D) polynuclear Cu(II) complex (1) derived from (5-bromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H₂L) is synthesized and characterized by elemental analysis, IR spectroscopy, ESI-MS, and single crystal X-ray crystallography. Its catalytic performance towards the solvent-free microwave-assisted peroxidative oxidation of aliphatic and aromatic hydrocarbons under mild conditions is compared with that of dinuclear Cu(II) complexes (2 and 3) of the same ligand, previously reported as antiproliferative agents. Polymer 1 exhibits the highest activity, either for the oxidation of cyclohexane (leading to overall yields, based on the alkane, of up to 39% of cyclohexanol and cyclohexanone) or towards the oxidation of toluene (selectively affording benzaldehyde up to a 44% yield), after 2 or 2.5 h of irradiation at 80 or 50 °C, respectively.

New Copper(II) Coordination Compounds Assembled from Multifunctional Pyridine-Carboxylate Blocks: Synthesis, Structures, and Catalytic Activity in Cycloalkane Oxidation

Two new copper(II) coordination compounds, namely a 1D coordination polymer [Cu(µ-cpna)(phen)(H₂O)]_n (1) and a discrete tetracopper(II) derivative [Cu(phen)₂(H₂O)]₂[Cu₂(µ-Hdppa)₂(Hdppa)₂] (2), were hydrothermally synthesized from copper(II) chloride as a metal source, 5-(4-carboxyphenoxy)nicotinic acid (H₂cpna) or 5-(3,4-dicarboxylphenyl)picolinic acid (H₃dppa) as a principal building block, and 1,10-phenanthroline (phen) as a crystallization mediator. Compounds 1 and 2 were isolated as air-stable microcrystalline solids and fully characterized by elemental and thermogravimetric analyses, IR spectroscopy, powder and single-crystal X-ray diffraction. In the solid state, the structure of 1 discloses the linear interdigitated 1D coordination polymer chains with the 2C1 topology. The crystal structure of an ionic derivative 2 shows that the mono- and dicopper(II) units are extended into the intricate 1D hydrogen-bonded chains with the SP 1-periodic net (4,4)(0,2) topology. Thermal stability and catalytic properties of 1 and 2 were also investigated. In fact, both Cu derivatives act as efficient homogeneous catalysts (catalyst precursors) for the mild oxidation of cycloalkanes by hydrogen peroxide to give the corresponding alcohols and ketones; the substrate scope and the effects of type and amount of acid promoter as well as bond-, regio-, and stereo-selectivity features were investigated.

Copper(II) Complexes of Arylhydrazone of 1H-Indene-1,3(2H)-dione as Catalysts for the Oxidation of Cyclohexane in Ionic Liquids

The copper(II) complexes [CuL(H2O)2]∙H2O (1) and [CuL(dea)] (2) [L = 2-(2-(1,3-dioxo-1H-inden-2(3H)-ylidene)hydrazinyl)benzenesulfonate, dea = diethanolamine] were applied as catalysts in the peroxidative (with tert-butyl-hydroperoxide or hydrogen peroxide) conversion of cyclohexane to cyclohexanol and cyclohexanone, either in acetonitrile or in any of the ionic liquids [bmim][NTf2] and [hmim][NTf2] [bmim = 1-butyl-3-methylimidazolium, hmim = 1-hexyl-3-methylimidazolium, NTf2 = bis(trifluoromethanesulfonyl) imide]. Tert-butyl-hydroperoxide led to better product yields, as compared to H2O2, with a selectivity directed towards cyclohexanone. The ILs showed a better performance than the conventional solvent for the copper complex 1. No catalytic activity was observed for 2 in the presence of an IL.

Interplay between H-bonding and interpenetration in an aqueous copper(ii)-aminoalcohol-pyromellitic acid system: self-assembly synthesis, structural features and catalysis

Two new copper(ii) coordination compounds, [Cu(H1.5mdea)2]2(H2pma) (1a) and [{Cu2(μ-Hmdea)2}2(μ4-pma)]n·2nH2O (1b), were self-assembled at different temperatures from the same multicomponent reaction system, comprising copper(ii) nitrate, N-methyldiethanolamine (H2mdea), pyromellitic acid (H4pma), and potassium hydroxide. Products 1a and 1b were isolated as microcrystalline solids and fully characterized and their structures were established by single-crystal X-ray diffraction. Compound 1a features the bis-aminoalcohol(ate) monocopper(ii) units and H2pma2- anions that are multiply interconnected by strong H-bonds into a firm 2D H-bonded layer. Compound 1b reveals the bis-aminoalcoholate dicopper(ii) motifs that are interlinked by the μ4-pma4- spacers into a 3D + 3D interpenetrated metal-organic framework. From a topological perspective, both networks of 1a and 1b are uninodal and driven by similar 4-connected H2pma2- or pma4- nodes, but result in distinct sql and dia topologies, respectively. Compound 1a was applied as an efficient catalyst for two model cycloalkane functionalization reactions: (1) oxidation by H2O2 to form cyclic alcohols and ketones and (2) hydrocarboxylation by CO/H2O and S2O82- to form cycloalkanecarboxylic acids. The substrate scope, effects of various reaction parameters, selectivity and mechanistic features were also investigated.

Cu42Ge24Na4—A Giant Trimetallic Sesquioxane Cage: Synthesis, Structure, and Catalytic Activity

Unprecedented germanium-based sesquioxane exhibits an extremely high nuclearity (Cu42Ge24Na4) and unusual encapsulation features. The compound demonstrated a high catalytic activity in the oxidative amidation of alcohols, with cost-effective catalyst loading down to 400 ppm of copper, and in the oxidation of cyclohexane and other alkanes with H2O2 in acetonitrile in the presence of nitric acid. Selectivity parameters and the mode of dependence of initial cyclohexane oxidation rate on initial concentration of the hydrocarbon indicate that the reaction occurs with the participation of hydroxyl radicals and alkyl hydroperoxides are formed as the main primary product. Alcohols have been transformed into the corresponding ketones by the catalytic oxidation with tert-butyl hydroperoxide.

Peroxidative Oxidation of Alkanes and Alcohols under Mild Conditions by Di- and Tetranuclear Copper (II) Complexes of Bis (2-Hydroxybenzylidene) Isophthalohydrazide

Bis(2-hydroxybenzylidene)isophthalohydrazide (H₄L) has been used to synthesize the dinuclear [Cu₂(1κNO²:2κN′O′²-H₂L)(NO₃)₂(H₂O)₂] (1) and the tetranuclear [Cu₄(μ-1κNO²:2κN′O²-H₂L)₂(μ-NO₃)₂(H₂O)₄]·2C₂H₅OH (2) complexes. The solvent plays an important role in determining the ligand behaviour in the syntheses of the complexes. An ethanol-acetonitrile mixture of solvents favours partials enolization in the case of 2. Both complexes have been characterized by elemental analysis, infrared radiation (IR), single crystal X-ray crystallography and electrochemical methods. The variable temperature magnetic susceptibility measurements of 2 show strong antiferromagnetic coupling between the central nitrato-bridged Cu (II) ions. The catalytic activity of both 1 and 2 has been screened toward the solvent-free microwave-assisted oxidation of alcohols and the peroxidative oxidation of alkanes under mild conditions. Complex 1 exhibits the highest activity for both oxidation reactions, leading selectively to a maximum product yield of 99% (for the 1-phenylethanol oxidation after 1 h without any additive) and 13% (for the cyclohexane oxidation to cyclohexyl hydroperoxide, cyclohexanol and cyclohexanone after 3 h).

High-Cluster (Cu9) Cage Silsesquioxanes: Synthesis, Structure, and Catalytic Activity

Unusual high-cluster (Cu₉) cage phenylsilsesquioxanes were obtained via complexation of in situ Cu^II,Na-silsesquioxane species formed with phenanthroline and neocuproine. In the first case, phenanthroline, acting as "a silent ligand" (not participating in the composition of the final product), favors the formation of an unprecedented cagelike phenylsilsesquioxane of Cu₉Na₆ nuclearity, 1. In the second case, neocuproine ligands withdraws two Cu ions from the metallasilsesquioxane matrix, producing two cationic fragments Cu⁺(neocuproine)₂. The remaining metallasilsesquioxane is rearranged into an anionic cage of Cu₉Na₄ nuclearity, finalizing the formation of a specific ionic complex, 2. The impressive molecular architecture of both types of complexes, e.g., the presence of different (cyclic/acyclic) types of silsesquioxane ligands, was established by single-crystal X-ray diffraction studies. Compound 1 was revealed to be highly active in the oxidative amidation of benzylic alcohol and the catalyst loading could be reduced down to 100 ppm of Cu. Catalytic studies of compound 1 demonstrated its high activity in hydroperoxidation of alkanes with H₂O₂ and oxidation of alcohols to ketones with tert-BuOOH.

Heterometallic CuIIFeIII and CuIIMnIII alkoxo-bridged complexes revealing a rare hexanuclear M6(μ-X)7(μ3-X)2 molecular core

The novel hexanuclear complexes [Cu4Fe2(OH)(Piv)4(tBuDea)4Cl]·0.5CH3CN (1) and [Cu4Mn2(OH)(Piv)4(tBuDea)4Cl] (2) were prepared through one-pot self-assembly reactions of copper powder and iron(ii) or manganese(ii) chloride with N-tert-butyldiethanolamine (H2tBuDea) and pivalic acid (HPiv) in acetonitrile. Crystallographic studies revealed the uncommon molecular core type M6(μ-X)7(μ3-X)2 in 1 and 2, which can be viewed as a combination of two trimetallic M3(μ-X)2(μ3-X) fragments joined by three bridging atoms. The analysis and classification of the hexanuclear complexes having a M3(μ-X)2(μ3-X) moiety as a core forming fragment using data from the Cambridge Structural Database (CSD) were performed. Variable-temperature (1.8-300 K) magnetic susceptibility measurements of 1 showed a decrease of the effective magnetic moment value at low temperature, indicative of antiferromagnetic coupling between the magnetic centres (JFe-Cu/hc = -6.9 cm-1, JCu-Cu/hc = -4.1 cm-1, JFe-Fe/hc = -24.2 cm-1). Complex 1 acts as a catalyst in the reaction of mild oxidation of cyclohexane with H2O2, showing the yields of products, cyclohexanol and cyclohexanone, up to 17% using pyrazinecarboxylic acid as a promoter. In the oxidation of cis-1,2-dimethylcyclohexane with m-chloroperoxybenzoic acid (m-CPBA), 70% of retention of stereoconfiguration was observed for tertiary alcohols. Compound 1 also catalyses the amidation of cyclohexane with benzamide. In all three catalytic reactions the by-products were investigated in detail and discussed.

Copper(ii) complexes of functionalized 2,2':6',2''-terpyridines and 2,6-di(thiazol-2-yl)pyridine: structure, spectroscopy, cytotoxicity and catalytic activity

Six new copper(ii) complexes with 2,2':6',2''-terpyridine (4'-Rⁿ-terpy) [1 (R¹ = furan-2-yl), 2 (R² = thiophen-2-yl), and 3 (R³ = 1-methyl-1H-pyrrol-2-yl)] and 2,6-di(thiazol-2-yl)pyridine derivatives (Rⁿ-dtpy) [4 (R¹), 5 (R²), and 6 (R³)] have been synthesized by a reaction between copper(ii) chloride and the corresponding ligand. The complexes have been characterized by UV-vis and IR spectroscopy, and their structures have been determined by X-ray analysis. The antiproliferative potential of copper(ii) complexes of 2,2':6',2''-terpyridine and 2,6-di(thiazol-2-yl)pyridine derivatives towards human colorectal (HCT116) and ovarian (A2780) carcinoma as well as towards lung (A549) and breast adenocarcinoma (MCF7) cell lines was examined. Complex 1 and complex 6 were found to have the highest antiproliferative effect on A2780 ovarian carcinoma cells, particularly when compared with complex 2, 3 with no antiproliferative effect. The order of cytotoxicity in this cell line is 6 > 1 > 5 > 4 > 2 ≈ 3. Complex 2 seems to be much more specific towards colorectal carcinoma HCT116 and lung adenocarcinoma A549 cells. The viability loss induced by the complexes agrees with Hoechst 33258 staining and typical morphological apoptotic characteristics like chromatin condensation and nuclear fragmentation. The specificity towards different types of cell lines and the low cytotoxic activity towards healthy cells are of particular interest and are a positive feature for further developments. Complexes 1-6 were also tested in the oxidation of alkanes and alcohols with hydrogen peroxide and tert-butyl-hydroperoxide (TBHP). The most active catalyst 4 gave, after 120 min, 0.105 M of cyclohexanol + cyclohexanone after reduction with PPh₃. This concentration corresponds to a yield of 23% and TON = 210. Oxidation of cis-1,2-dimethylcyclohexane with m-CPBA catalyzed by 4 in the presence of HNO₃ gave a product of a stereoselective reaction (trans/cis = 0.47). Oxidation of secondary alcohols afforded the target ketones in yields up to 98% and TON = 630.

Functional Enzyme Mimics for Oxidative Halogenation Reactions that Combat Biofilm Formation

Transition-metal oxide nanoparticles and molecular coordination compounds are highlighted as functional mimics of halogenating enzymes. These enzymes are involved in halometabolite biosynthesis. Their activity is based upon the formation of hypohalous acids from halides and hydrogen peroxide or oxygen, which form bioactive secondary metabolites of microbial origin with strong antibacterial and antifungal activities in follow-up reactions. Therefore, enzyme mimics and halogenating enzymes may be valuable tools to combat biofilm formation. Here, halogenating enzyme models are briefly described, enzyme mimics are classified according to their catalytic functions, and current knowledge about the settlement chemistry and adhesion of fouling organisms is summarized. Enzyme mimics with the highest potential are showcased. They may find application in antifouling coatings, indoor and outdoor paints, polymer membranes for water desalination, or in aquacultures, but also on surfaces for food packaging, door handles, hand rails, push buttons, keyboards, and other elements made of plastic where biofilms are present. The use of natural compounds, formed in situ with nontoxic and abundant metal oxide enzyme mimics, represents a novel and efficient "green" strategy to emulate and utilize a natural defense system for preventing bacterial colonization and biofilm growth.

cis-Oxoruthenium complexes supported by chiral tetradentate amine (N4) ligands for hydrocarbon oxidations

We report the first examples of ruthenium complexes cis-[(N₄)Ru^IIICl₂]⁺ and cis-[(N₄)Ru^II(OH₂)₂]²⁺ supported by chiral tetradentate amine ligands (N₄), together with a high-valent cis-dioxo complex cis-[(N₄)Ru^VI(O)₂]²⁺ supported by the chiral N₄ ligand mcp (mcp = N,N'-dimethyl-N,N'-bis(pyridin-2-ylmethyl)cyclohexane-1,2-diamine). The X-ray crystal structures of cis-[(mcp)Ru^IIICl₂](ClO₄) (1a), cis-[(Me₂mcp)Ru^IIICl₂]ClO₄ (2a) and cis-[(pdp)Ru^IIICl₂](ClO₄) (3a) (Me₂mcp = N,N'-dimethyl-N,N'-bis((6-methylpyridin-2-yl)methyl)cyclohexane-1,2-diamine, pdp = 1,1'-bis(pyridin-2-ylmethyl)-2,2'-bipyrrolidine)) show that the ligands coordinate to the ruthenium centre in a cis-α configuration. In aqueous solutions, proton-coupled electron-transfer redox couples were observed for cis-[(mcp)Ru^III(O₂CCF₃)₂]ClO₄ (1b) and cis-[(pdp)Ru^III(O₃SCF₃)₂]CF₃SO₃ (3c'). Electrochemical analyses showed that the chemically/electrochemically generated cis-[(mcp)Ru^VI(O)₂]²⁺ and cis-[(pdp)Ru^VI(O)₂]²⁺ complexes are strong oxidants with E° = 1.11-1.13 V vs. SCE (at pH 1) and strong H-atom abstractors with D_O-H = 90.1-90.8 kcal mol^-1. The reaction of 1b or its (R,R)-mcp counterpart with excess (NH₄)₂[Ce^IV(NO₃)₆] (CAN) in aqueous medium afforded cis-[(mcp)Ru^VI(O)₂](ClO₄)₂ (1e) or cis-[((R,R)-mcp)Ru^VI(O)₂](ClO₄)₂ (1e*), respectively, a strong oxidant with E(Ru^VI/V) = 0.78 V (vs. Ag/AgNO₃) in acetonitrile solution. Complex 1e oxidized various hydrocarbons, including cyclohexane, in acetonitrile at room temperature, affording alcohols and/or ketones in up to 66% yield. Stoichiometric oxidations of alkenes by 1e or 1e* in ^t BuOH/H₂O (5 : 1 v/v) afforded diols and aldehydes in combined yields of up to 98%, with moderate enantioselectivity obtained for the reaction using 1e*. The cis-[(pdp)Ru^II(OH₂)₂]²⁺ (3c)-catalysed oxidation of saturated C-H bonds, including those of ethane and propane, with CAN as terminal oxidant was also demonstrated.

Heptanuclear Fe5Cu2-Phenylgermsesquioxane containing 2,2'-Bipyridine: Synthesis, Structure, and Catalytic Activity in Oxidation of C-H Compounds

A new representative of an unusual family of metallagermaniumsesquioxanes, namely the heterometallic cagelike phenylgermsesquioxane (PhGeO₂)₁₂Cu₂Fe₅(O)OH(PhGe)₂O₅(bipy)₂ (2), was synthesized and structurally characterized. Fe(III) ions of the complex are coordinated by oxa ligands: (i) cyclic (PhGeO₂)₁₂ and acyclic (Ph₂Ge₂O₅) germoxanolates and (ii) O^2- and (iii) HO^- moieties. In turn, Cu(II) ions are coordinated by both oxa (germoxanolates) and aza ligands (2,2'-bipyridines). This "hetero-type" of ligation gives in sum an attractive pagoda-like molecular architecture of the complex 2. Product 2 showed a high catalytic activity in the oxidation of alkanes to the corresponding alkyl hydroperoxides (in yields up to 30%) and alcohols (in yields up to 100%) and in the oxidative formation of benzamides from alcohols (catalyst loading down to 0.4 mol % in Cu/Fe).

Oxidative functionalization of C–H compounds induced by the extremely efficient osmium catalysts (a review)

In recent years, osmium complexes have found applications not only in thecis-hydroxylation of olefins but also very efficient in the oxygenation of C–H compounds (saturated and aromatic hydrocarbons and alcohols) by hydrogen peroxide as well as organic peroxides.

New oxidovanadium(iv) complex with a BIAN ligand: synthesis, structure, redox properties and catalytic activity

The combination of a new oxidovanadium(iv) complex1with pyrazine-2-carboxylic acid (PCA; a cocatalyst) affords a catalytic system for the efficient oxidation of saturated hydrocarbons.

Extending the family of quinolone antibacterials to new copper derivatives: self-assembly, structural and topological features, catalytic and biological activity

New copper(ii) compounds with quinolone pefloxacin were synthesized and fully characterized; they exhibit notable catalytic activity and promising biological profiles.

Si10Cu6N4 Cage Hexacoppersilsesquioxanes Containing N Ligands: Synthesis, Structure, and High Catalytic Activity in Peroxide Oxidations

The synthesis, composition, and catalytic properties of a new family of hexanuclear Cu(II)-based phenylsilsesquioxanes are described here. Structural studies of 17 synthesized compounds revealed the general principle underlying their molecular topology: viz., a central metal oxide layer consisting of two Cu₃ trimers is coordinated by two cyclic [PhSiO_1.5]₅ siloxanolate ligands to form a skewed sandwich architecture with the composition [(PhSiO_1.5)₁₀(CuO)₆]²⁺. In addition to this O ligation by the siloxanolate rings, two opposite copper ions are additionally coordinated by the nitrogen atoms of corresponding N ligand(s), such as 2,2'-bipyridine (compounds 1-9), 1,10-phenanthroline (compounds 10-13), mixed 1,10-phenanthroline/2,2'-bipyridine (compound 14), or bathophenanthroline (compounds 15-17). Finally, the charge balance is maintained by two HO^- (compounds 1-7, 10-13, and 15-17), two H₃CO^- (compound 8), or two CH₃COO^- (compounds 9 and 14) anions. Complexes 1 and 10 exhibited a high activity in the oxidative amidation oxidation of alcohols. Compounds 1, 10, and 15 are very efficient homogeneous catalysts in the oxidation of alkanes and alcohols with peroxides.

Photocatalyzed Site-Selective C(sp3)-H Functionalization of Alkylpyridines at Non-Benzylic Positions

Tetrabutylammonium decatungstate (TBADT)-photocatalyzed C-H functionalization of alkylpyridines was investigated. Unlike alkylbenzene counterparts, alkylation of α-C-H bonds did not proceed for the reaction of 2- and 4-alkylpyridines and reluctantly proceeded for 3-alkylpyridines, which allow site-selective C(sp³)-H functionalization at nonbenzylic positions. The observed nonbenzylic site selectivities are rationalized by the polar inductive effects of pyridyl groups in the S_H2 transition states. Consecutive γ-functionalization and α-bromofunctionalization were successfully carried out in selected cases.