Plant- vs. Bacterial-Derived Cellulose for Wound Healing: A Review

Waste-derived biomaterials as building blocks in the biomedical field

Recent developments in the biomedical arena have led to the fabrication of innovative biomaterials by utilizing bioactive molecules obtained from biological wastes released from fruit and beverage processing industries, and fish, meat, and poultry industries. These biological wastes that end up in water bodies as well as in landfills are an affluent source of animal- and plant-derived proteins, bio ceramics and polysaccharides such as collagens, gelatins, chitins, chitosans, eggshell membrane proteins, hydroxyapatites, celluloses, and pectins. These bioactive molecules have been intricately designed into scaffolds and dressing materials by utilizing advanced technologies for drug delivery, tissue engineering, and wound healing relevance. These biomaterials are environment-friendly, biodegradable, and biocompatible, and show excellent tissue regeneration attributes. Additionally, being cost-effective they can reduce the burden on the healthcare system as well as provide a sustainable solution to waste management. In this review, the current trends in the utilization of plant and animal waste-derived biomaterials in various biomedical fields are considered along with a separate section on their applications as xenografts.

Enhanced Production of Bacterial Cellulose from Miscanthus as Sustainable Feedstock through Statistical Optimization of Culture Conditions

Biorefineries are attracting attention as an alternative to the petroleum industry to reduce carbon emissions and achieve sustainable development. In particular, because forests play an important role in potentially reducing greenhouse gas emissions to net zero, alternatives to cellulose produced by plants are required. Bacterial cellulose (BC) can prevent deforestation and has a high potential for use as a biomaterial in various industries such as food, cosmetics, and pharmaceuticals. This study aimed to improve BC production from lignocellulose, a sustainable feedstock, and to optimize the culture conditions for Gluconacetobacter xylinus using Miscanthus hydrolysates as a medium. The productivity of BC was improved using statistical optimization of the major culture parameters which were as follows: temperature, 29 °C; initial pH, 5.1; and sodium alginate concentration, 0.09% (w/v). The predicted and actual values of BC production in the optimal conditions were 14.07 g/L and 14.88 g/L, respectively, confirming that our prediction model was statistically significant. Additionally, BC production using Miscanthus hydrolysates was 1.12-fold higher than in the control group (commercial glucose). Our result indicate that lignocellulose can be used in the BC production processes in the near future.

Natural Biomaterials from Biodiversity for Healthcare Applications

Natural biomaterials originating during the growth cycles of all living organisms have been used for many applications. They span from bioinert to bioactive materials including bioinspired ones. As they exhibit an increasing degree of sophistication, natural biomaterials have proven suitable to address the needs of the healthcare sector. Here the different natural healthcare biomaterials, their biodiversity sources, properties, and promising healthcare applications are reviewed. The variability of their properties as a result of considered species and their habitat is also discussed. Finally, some limitations of natural biomaterials are discussed and possible future developments are provided as more natural biomaterials are yet to be discovered and studied.

Effects of pretreatment, NaOH concentration, and extraction temperature on the cellulose from Lophatherum gracile Brongn

Lophatherum gracile Brongn. (LGB), a homology material of medicine and food, has plentiful cellulose. Aiming to investigate the physiochemical characteristic differences of LGB cellulose extracted by various pretreatment methods and extraction conditions, the effect of dry crushing and wet beating, and the alkaline solution concentration and temperature were compared. Results showed that the extracted cellulose after dry crushing pretreatment had higher purity and lower non-cellulosic components such as hemicellulose, lignin and ash than those obtained by wet beating pretreatment. Furthermore, the impurities were more thoroughly removed by the alkaline solution at high concentration and temperature. Structural characterization revealed that the cellulose obtained by wet beating pretreatment had more fibrillation and smaller particle size, while destroyed crystallinity resulting in bad thermal stability. The alkaline solution temperature had no effect on the morphology and particle size, but high alkaline solution temperature (90 °C) improved crystallinity and thermal stability. Furtherly, the cellulose II produced by at high alkaline solution concentration (18 wt%) exhibited denser surface, smaller particle size and higher thermal stability than the cellulose I extracted at low alkaline solution concentration (4 wt%). Especially, the crystallinity of cellulose II was higher than that of cellulose I with dry crushing pretreatment, while the cellulose obtained by wet beating displayed an opposite trend. Hydration properties indicated that the water holding capacity, oil binding capacity and swelling capacity of the cellulose pretreated by dry crushing were higher than those of the cellulose pretreated by wet beating, and the cellulose I exhibited higher hydration properties compared to the cellulose II, which may depend on its loose network structure. This study suggested that dry crushing pretreatment and high alkaline solution temperature could effectively improve functional properties of LGB cellulose I and II, which promoted its use in food applications.

Preparation, Marriage Chemistry and Applications of Graphene Quantum Dots-Nanocellulose Composite: A Brief Review

Graphene quantum dots (GQDs) are zero-dimensional carbon-based materials, while nanocellulose is a nanomaterial that can be derived from naturally occurring cellulose polymers or renewable biomass resources. The unique geometrical, biocompatible and biodegradable properties of both these remarkable nanomaterials have caught the attention of the scientific community in terms of fundamental research aimed at advancing technology. This study reviews the preparation, marriage chemistry and applications of GQDs-nanocellulose composites. The preparation of these composites can be achieved via rapid and simple solution mixing containing known concentration of nanomaterial with a pre-defined composition ratio in a neutral pH medium. They can also be incorporated into other matrices or drop-casted onto substrates, depending on the intended application. Additionally, combining GQDs and nanocellulose has proven to impart new hybrid nanomaterials with excellent performance as well as surface functionality and, therefore, a plethora of applications. Potential applications for GQDs-nanocellulose composites include sensing or, for analytical purposes, injectable 3D printing materials, supercapacitors and light-emitting diodes. This review unlocks windows of research opportunities for GQDs-nanocellulose composites and pave the way for the synthesis and application of more innovative hybrid nanomaterials.

Recent advancements in cellulose-based biomaterials for management of infected wounds

INTRODUCTION

Chronic wounds are a substantial burden on the healthcare system. Their treatment requires advanced dressings, which can provide a moist wound environment, prevent bacterial infiltration, and act as a drug carrier. Cellulose is biocompatible, biodegradable, and can be functionalized according to specific requirements, which makes it a highly versatile biomaterial. Antimicrobial cellulose dressings are proving to be highly effective against infected wounds.

AREAS COVERED

This review briefly addresses the mechanism of wound healing and its pathophysiology. It also discusses wound infections, biofilm formation, and progressive emergence of drug-resistant bacteria in chronic wounds and the treatment strategies for such types of infected wounds. It also summarizes the general properties, method of production, and types of cellulose wound dressings. It explores recent studies and advancements regarding the use of cellulose and its derivatives in wound management.

EXPERT OPINION

Cellulose and its various functionalized derivatives represent a promising choice of wound dressing material. Cellulose-based dressings loaded with antimicrobials are very useful in controlling infection in a chronic wound. Recent studies showing its efficacy against drug-resistant bacteria make it a favorable choice for chronic wound infections. Further research and large-scale clinical trials are required for better clinical evidence of its efficiency.

Nanocelluloses Reinforced Bio-Waterborne Polyurethane

The aim of this work was to evaluate the influence of two kinds of bio- nano-reinforcements, cellulose nanocrystals (CNCs) and bacterial cellulose (BC), on the properties of castor oil-based waterborne polyurethane (WBPU) films. CNCs were obtained by the acidolysis of microcrystalline cellulose, while BC was produced from Komagataeibacter medellinensis. A WBPU/BC composite was prepared by the impregnation of a wet BC membrane and further drying, while the WBPU/CNC composite was obtained by casting. The nanoreinforcement was adequately dispersed in the polymer using any of the preparation methods, obtaining optically transparent compounds. Thermal gravimetric analysis, Fourier-transform infrared spectroscopy, field emission scanning electron microscopy, dynamical mechanical analysis, differential scanning calorimetry, contact angle, and water absorption tests were carried out to analyze the chemical, physical, and thermal properties, as well as the morphology of nanocelluloses and composites. The incorporation of nanoreinforcements into the formulation increased the storage modulus above the glass transition temperature of the polymer. The thermal stability of the BC-reinforced composites was slightly higher than that of the CNC composites. In addition, BC allowed maintaining the structural integrity of the composites films, when they were immersed in water. The results were related to the relatively high thermal stability and the particular three-dimensional interconnected reticular morphology of BC.

Kombucha SCOBY Waste as a Catalyst Support

It is established that food waste can be repurposed to extend its lifecycle and decrease its carbon footprint. In this work, SCOBY (symbiotic culture of bacteria and yeast) waste from kombucha tea production has been repurposed as a catalyst support. Copper nanoparticles (Cu NPs) have been embedded in a piece of treated SCOBY via an in-situ method which enabled the catalyst, inCu/t-SCOBY, to be easily recycled. In addition, inCu/t-SCOBY catalyzed the full reduction of 4-nitrophenol in an excess of sodium borohydride (NaBH₄ ) within 20 minutes. After 6 additional catalytic cycles, the catalyst maintained up to 50% of its performance in the first cycle. Characterization of the catalyst has also been done to understand the mechanism of action and interactions occurring between t-SCOBY and Cu NPs. The results of this work clearly present a proof-of-concept in utilizing porous wastes materials such as SCOBY as catalyst supports, allowing metallic NPs to be efficacious and practical heterogenous catalysts.

Characterizing Bacterial Cellulose Produced byKomagataeibacter sucrofermentans H-110 on Molasses Medium and Obtaining a Biocomposite Based on It for the Adsorption of Fluoride

Currently, there is an increased demand for biodegradable materials in society due to growing environmental problems. Special attention is paid to bacterial cellulose, which, due to its unique properties, has great prospects for obtaining functional materials for a wide range of applications, including adsorbents. In this regard, the aim of this study was to obtain a biocomposite material with adsorption properties in relation to fluoride ions based on bacterial cellulose using a highly productive strain of Komagataeibacter sucrofermentans H-110 on molasses medium. Films of bacterial cellulose were obtained. Their structure and properties were investigated by FTIR spectroscopy, NMR, atomic force microscopy, scanning electron microscopy, and X-ray structural analysis. The results show that the fiber thickness of the bacterial cellulose formed by the K. sucrofermentans H-110 strain on molasses medium was 60–90 nm. The degree of crystallinity of bacterial cellulose formed on the medium was higher than on standard Hestrin and Schramm medium and amounted to 83.02%. A new biocomposite material was obtained based on bacterial cellulose chemically immobilized on its surface using atomic-layer deposition of nanosized aluminum oxide films. The composite material has high sorption ability to remove fluoride ions from an aqueous medium. The maximum adsorption capacity of the composite is 80.1 mg/g (F/composite). The obtained composite material has the highest adsorption capacity of fluoride from water in comparison with other sorbents. The results prove the potential of bacterial cellulose-based biocomposites as highly effective sorbents for fluoride.

In Vitro Efficacy of Bacterial Cellulose Dressings Chemisorbed with Antiseptics against Biofilm Formed by Pathogens Isolated from Chronic Wounds

Local administration of antiseptics is required to prevent and fight against biofilm-based infections of chronic wounds. One of the methods used for delivering antiseptics to infected wounds is the application of dressings chemisorbed with antimicrobials. Dressings made of bacterial cellulose (BC) display several features, making them suitable for such a purpose. This work aimed to compare the activity of commonly used antiseptic molecules: octenidine, polyhexanide, povidone-iodine, chlorhexidine, ethacridine lactate, and hypochlorous solutions and to evaluate their usefulness as active substances of BC dressings against 48 bacterial strains (8 species) and 6 yeast strains (1 species). A silver dressing was applied as a control material of proven antimicrobial activity. The methodology applied included the assessment of minimal inhibitory concentrations (MIC) and minimal biofilm eradication concentration (MBEC), the modified disc-diffusion method, and the modified antibiofilm dressing activity measurement (A.D.A.M.) method. While in 96-well plate-based methods (MIC and MBEC assessment), the highest antimicrobial activity was recorded for chlorhexidine, in the modified disc-diffusion method and in the modified A.D.A.M test, povidone-iodine performed the best. In an in vitro setting simulating chronic wound conditions, BC dressings chemisorbed with polyhexanide, octenidine, or povidone-iodine displayed a similar or even higher antibiofilm activity than the control dressing containing silver molecules. If translated into clinical conditions, the obtained results suggest high applicability of BC dressings chemisorbed with antiseptics to eradicate biofilm from chronic wounds.

Plant-Based Scaffolds in Tissue Engineering

A wide range of platforms has been developed for 3D culture of cells in vitro to aggregate and align cells to resemble in vivo conditions in order to enhance communication between cells and promote differentiation. The cellulose skeleton of plant tissue can serve as an attainable scaffold for mammalian cells after decellularization, which is advantageous when compared to synthetic polymers or animal-derived scaffolds. Adjustable variables to modify the physical and biochemical properties of the resulting scaffolds include the protocol for the sodium dodecyl sulfate (SDS)-based decellularization procedure, surface coatings for cell attachment, plant type for decellularization, differentiation media, and integrity and shape of the substrate. These tunable cellulose platforms can host a wide range of mammalian cell types from muscle to bone cells, as well as malignancies. Here, fundamentals and applications of decellularized plant-based scaffolds are discussed. These biocompatible, naturally perfused, tunable, and easily prepared decellularized scaffolds may allow eco-friendly manufacturing frameworks for application in tissue engineering and organs-on-a-chip.

Development of Bacterial Cellulose Biocomposites Combined with Starch and Collagen and Evaluation of Their Properties

One of the major benefits of biomedicine is the use of biocomposites as wound dressings to help improve the treatment of injuries. Therefore, the main objective of this study was to develop and characterize biocomposites based on bacterial cellulose (BC) with different concentrations of collagen and starch and characterize their thermal, morphological, mechanical, physical, and barrier properties. In total, nine samples were produced with fixed amounts of glycerol and BC and variations in the amount of collagen and starch. The water activity (0.400–0.480), water solubility (12.94–69.7%), moisture (10.75–20.60%), thickness (0.04–0.11 mm), water vapor permeability (5.59–14.06 × 10⁻⁸ g·mm/m²·h·Pa), grammage (8.91–39.58 g·cm⁻²), opacity (8.37–36.67 Abs 600 nm·mm⁻¹), elongation (4.81–169.54%), and tensile strength (0.99–16.32 MPa) were evaluated and defined. In addition, scanning electron microscopy showed that adding biopolymers in the cellulose matrix made the surface compact, which also influenced the visual appearance. Thus, the performance of the biocomposites was directly influenced by their composition. The performance of the different samples obtained resulted in them having different potentials for application considering the injury type. This provides a solution for the ineffectiveness of traditional dressings, which is one of the great problems of the biomedical sector.

Yerba Mate Extract in Microfibrillated Cellulose and Corn Starch Films as a Potential Wound Healing Bandage

Microfibrillated cellulose films have been gathering considerable attention due to their high mechanical properties and cheap cost. Additionally, it is possible to include compounds within the fibrillated structure in order to confer desirable properties. Ilex paraguariensis A. St.-Hil, yerba mate leaf extract has been reported to possess a high quantity of caffeoylquinic acids that may be beneficial for other applications instead of its conventional use as a hot beverage. Therefore, we investigate the effect of blending yerba mate extract during and after defibrillation of Eucalyptus sp. bleached kraft paper by ultrafine grinding. Blending the extract during defibrillation increased the mechanical and thermal properties, besides being able to use the whole extract. Afterwards, this material was also investigated with high content loadings of starch and glycerine. The results present that yerba mate extract increases film resistance, and the defibrillated cellulose is able to protect the bioactive compounds from the extract. Additionally, the films present antibacterial activity against two known pathogens S. aureus and E. coli, with high antioxidant activity and increased cell proliferation. This was attributed to the bioactive compounds that presented faster in vitro wound healing, suggesting that microfibrillated cellulose (MFC) films containing extract of yerba mate can be a potential alternative as wound healing bandages.