Nanotoxicology of Metal Oxide Nanoparticles

Extracellular Synthesis and Characterization of Silver Nanoparticles-Antibacterial Activity against Multidrug-Resistant Bacterial Strains

Herein, we report the use of a cell-free extract for the extracellular synthesis of silver nanoparticles (AgNPs) and their potential to address the growing threat of multidrug-resistant (MDR) pathogenic bacteria. The reproducibility of AgNP synthesis was good and AgNP formation kinetics were monitored as a function of various reaction factors via ultraviolet-visible absorption spectroscopy. This green method was dependent on the alkaline pH of the reaction mixture. With the addition of dilute sodium hydroxide, well-dispersed AgNPs could be produced in large quantities via the classical nucleation and growth route. The new biosynthetic route enabled the production of AgNPs within a narrow size range of 4 to 17 nm. The AgNPs were characterized using various techniques and their antibacterial activity against MDR pathogenic bacteria was evaluated. Field-emission scanning electron microscopic imaging revealed prominent morphological changes in Staphylococcus aureus cells due to mechanical damage, which led to cell death. Escherichia coli cells showed signs of contraction and intracellular fluid discharge as a consequence of disrupted cell membrane function. This new biologically-assisted extracellular strategy is potentially useful for the decontamination of surfaces and is expected to contribute to the development of new products containing AgNPs.

The Nanosized Dye Adsorbents for Water Treatment

Clean water is a vital element for survival of any living creature and, thus, crucially important to achieve largely and economically for any nation worldwide. However, the astonishingly fast trend of industrialization and population growth and the arisen extensive water pollutions have challenged access to clean water across the world. In this regard, 1.6 million tons of dyes are annually consumed. Thereof, 10%–15% are wasted during use. To decolorize water streams, there is an urgent need for the advanced remediation approaches involving utilization of novel materials and technologies, which are cost and energy efficient. Nanomaterials, with their outstanding physicochemical properties, can potentially resolve the challenge of need to water treatment in a less energy demanding manner. In this review, a variety of the most recent (from 2015 onwards) opportunities arisen from nanomaterials in different dimensionalities, performances, and compositions for water decolorization is introduced and discussed. The state-of-the-art research studies are presented in a classified manner, particularly based on structural dimensionality, to better illustrate the current status of adsorption-based water decolorization using nanomaterials. Considering the introduction of many newly developed nano-adsorbents and their classification based on the dimensionality factor, which has never been employed for this sake in the related literature, a comprehensive review will be presented.

Bioactivities of Geranium wallichianum Leaf Extracts Conjugated with Zinc Oxide Nanoparticles

This study attempts to obtain and test the bioactivities of leaf extracts from a medicinal plant, Geranium wallichianum (GW), when conjugated with zinc oxide nanoparticles (ZnONPs). The integrity of leaf extract-conjugated ZnONPs (GW-ZnONPs) was confirmed using various techniques, including Ultraviolet-visible spectroscopy, X-Ray Diffraction, Fourier Transform Infrared Spectroscopy, energy-dispersive spectra (EDS), scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. The size of ZnONPs was approximately 18 nm, which was determined by TEM analysis. Additionally, the energy-dispersive spectra (EDS) revealed that NPs have zinc in its pure form. Bioactivities of GW-ZnONPs including antimicrobial potentials, cytotoxicity, antioxidative capacities, inhibition potentials against α-amylase, and protein kinases, as well as biocompatibility were intensively tested and confirmed. Altogether, the results revealed that GW-ZnONPs are non-toxic, biocompatible, and have considerable potential in biological applications.

Lipid-based nanodelivery approaches for dopamine-replacement therapies in Parkinson's disease: From preclinical to translational studies

The incidence of Parkinson's disease (PD), the second most common neurodegenerative disorder, has increased exponentially as the global population continues to age. Although the etiological factors contributing to PD remain uncertain, its average incidence rate is reported to be 1% of the global population older than 60 years. PD is primarily characterized by the progressive loss of dopaminergic (DAergic) neurons and/or associated neuronal networks and the subsequent depletion of dopamine (DA) levels in the brain. Thus, DA or levodopa (l-dopa), a precursor of DA, represent cardinal targets for both idiopathic and symptomatic PD therapeutics. While several therapeutic strategies have been investigated over the past decade for their abilities to curb the progression of PD, an effective cure for PD is currently unavailable. Even DA replacement therapy, an effective PD therapeutic strategy that provides an exogenous supply of DA or l-dopa, has been hindered by severe challenges, such as a poor capacity to bypass the blood-brain barrier and inadequate bioavailability. Nevertheless, with recent advances in nanotechnology, several drug delivery systems have been developed to bypass the barriers associated with central nervous system therapeutics. In here, we sought to describe the adapted lipid-based nanodrug delivery systems used in the field of PD therapeutics and their recent advances, with a particular focus placed on DA replacement therapies. This work initially explores the background of PD; offers descriptions of the most recent molecular targets; currently available clinical medications/limitations; an overview of several lipid-based PD nanotherapeutics, functionalized nanoparticles, and technical aspects in brain delivery; and, finally, presents future perspectives to enhance the use of nanotherapeutics in PD treatment.

Novel mycosynthesis of cobalt oxide nanoparticles using Aspergillus brasiliensis ATCC 16404-optimization, characterization and antimicrobial activity

AIMS

Investigate the capability of Aspergillus brasiliensis ATCC 16404 to mycosynthesize Co₃ O₄ -NPs.

METHODS AND RESULTS

Mycelial cell-free filtrate of A. brasiliensis ATCC 16404 was applied for mycosynthesis of Co₃ O₄ -NPs. The preliminary indication for the formation of Co₃ O₄ -NPs was the change in colour from yellow to reddish-brown. One-factor-at a time-optimization technique was applied to determine the optimum physicochemical conditions required for the mycosynthesis of Co₃ O₄ -NPs and they were found to be: 72 h for reaction time, pH 11, 30°C, 100 rev min^-1 for shaking speed in the darkness using 4 mmol l^-1 of CoSO_4. 7H₂ O and 5·5% of A. brasiliensis dry weight mycelium (w/v). The mycosynthesized Co₃ O₄ -NPs were characterized using various techniques: spectroscopy including UV/Vis spectrophotometry, dynamic light scattering (DLS), zeta potential measurement, energy-dispersive X-ray analysis, Fourier transform infrared spectroscopy and X-ray diffraction; and vibrating sample magnetometry and microscopy including field emission scanning electron microscopy and high-resolution transmission electron microscopy. Spectroscopic techniques confirmed the formation of Co₃ O₄ -NPs and the microscopic ones confirmed the shape and size of the mycosynthesized Co₃ O₄ -NPs as quasi-spherical shaped, monodispersed nanoparticles with a nano size range of 20-27 nm. The mycosynthesized Co₃ O₄ -NPs have excellent magnetic properties and exhibited a good antimicrobial activity against some pathogenic micro-organisms.

CONCLUSION

Ferromagnetic Co₃ O₄ -NPs with considerable antimicrobial activity were for the first time mycosynthesized.

SIGNIFICANCE AND IMPACT OF THE STUDY

The use of fungi as potential bionanofactories for mycosynthesis of nanoparticles is relatively a recent field of research with considerable prospects.

Specific targeting cancer cells with nanoparticles and drug delivery in cancer therapy

Nanotechnology has been the latest approach for diagnosis and treatment for cancer, which opens up a new alternative therapeutic drug delivery option to treat disease. Nanoparticles (NPs) display a broad role in cancer diagnosis and has various advantages over the other conventional chemotherapeutic drug delivery. NPs possess more specific and efficient drug delivery to the targeted tissue, cell, or organs and minimize the risk of side effects. NPs undergo passive and active mode of drug targets to tumor area with less elimination of the drug from the system. Size and surface characteristics of nanoparticles play a crucial role in modulating nanocarrier efficiency and the biodistribution of chemo drugs in the body. Several types of nanocarriers, such as polymers, dendrimers, liposome-based, and carbon-based, are studied widely in cancer therapy. Although FDA approved very few nanotechnology drugs for cancer therapy, a large number of studies are undergoing for the development of novel nanocarriers for potent cancer therapy. In this review, we discuss the details of the nano-based therapeutics and diagnostics strategies, and the potential use of nanomedicines in cancer therapy and cancer drug delivery.

Metal Nanoparticles as Green Catalysts

Nanoparticles play a significant role in various fields ranging from electronics to composite materials development. Among them, metal nanoparticles have attracted much attention in recent decades due to their high surface area, selectivity, tunable morphologies, and remarkable catalytic activity. In this review, we discuss various possibilities for the synthesis of different metal nanoparticles; specifically, we address some of the green synthesis approaches. In the second part of the paper, we review the catalytic performance of the most commonly used metal nanoparticles and we explore a few roadblocks to the commercialization of the developed metal nanoparticles as efficient catalysts.

Biocompatibility of Polymer and Ceramic CAD/CAM Materials with Human Gingival Fibroblasts (HGFs)

Four polymer and ceramic computer-aided design/computer-aided manufacturing (CAD/CAM) materials from different manufacturers (VITA CAD-Temp (polymethyl methacrylate, PMMA), Celtra Duo (zirconia-reinforced lithium silicate ceramic, ZLS), IPS e.max CAD (lithium disilicate (LS₂)), and VITA YZ (yttrium-tetragonal zirconia polycrystal, Y-TZP)) were tested to evaluate the cytotoxic effects and collagen type I secretions on human gingival fibroblasts (HGFs). A total of 160 disc-shaped samples (Ø: 10 ± 2 mm; h: 2 mm) were milled from commercial blanks and blocks. Direct-contact cytotoxicity assays were evaluated at 24, 48, and 72 h, and collagen type I (COL1) secretions were analysed by cell-based ELISA at 24 and 72 h. Both experiments revealed statistically significant differences (p < 0.05). At 24 and 48 h of contact, cytotoxic potential was observed for all materials. Later, at 72 h, all groups reached biologically acceptable levels. LS₂ showed the best results regarding cell viability and collagen secretion in all of the time evaluations, while Y-TZP and ZLS revealed intermediate results, and PMMA exhibited the lowest values in both experiments. At 72 h, all groups showed sharp decreases in COL1 secretion regarding the 24-h values. According to the results obtained and the limitations of the present in vitro study, it may be concluded that the ceramic materials revealed a better cell response than the polymers. Nevertheless, further studies are needed to consolidate these findings and thus extrapolate the results into clinical practice.

Skin toxicity of topically applied nanoparticles

Nowadays, nanoproducts have found numerous applications, allowing them to enter the human body in different ways. Skin is a major body organ that acts as the first-line barrier between the internal organs and external environment. Although the inhalation and ingestion of nanoparticles is more dangerous compared with skin exposure, there are noteworthy information gaps in skin exposure to nanoparticles that need much attention. Despite the few reviews in the literature on the cytotoxic effects of nanoparticles, no research has reviewed the clinical side effects of nanoparticles following topical admonition, including skin inflammation, skin cancer and genetic toxicity.

Human primary macrophages scavenge AuNPs and eliminate it through exosomes. A natural shuttling for nanomaterials

The use of nanomaterials is increasing but the real risk associated with their use in humans has to be defined. In fact, nanomaterials tend to accumulate in organs over a long period of time and are slowly degraded or eliminated by the body. Exosomes are nanovesicles actively shuttle molecules, including chemical products and metals, through the body. Macrophages scavenge the body from both organic and inorganic substances, and they use to release high amounts of exosomes. We hypothesized that macrophages may have a role in eliminating nanomaterials through their exosomes. We treated human primary macrophages with 20 nm gold nanoparticles (AuNPs), analyzing the presence of AuNPs in both cells and the released exosomes by the implementation of different techniques, including SP-ICP-MS and NTA. We showed that macrophages endocytosed AuNPs and released them through exosomes. Our study on one hand provide the evidence for a new methodology in the early identification of the nanomaterials levels in exposed subjects. On the other hand we depict a way our body shuttle virtually intact nanoparticles through macrophage-released exosomes.

Bi2SiO5@g-SiO2 upconverting nanoparticles: a bismuth-driven core-shell self-assembly mechanism

Core-shell systems have attracted increasing interest among the research community in recent years due to their unique properties and structural features, and the development of new synthetic strategies is still a challenge. In this work, we have investigated lanthanide-doped Bi2SiO5 nanocrystal formation inside mesoporous silica nanoparticles (MSNs). The role of both synthesis temperature and concentration of the bismuth precursor impregnated into the MSNs is discussed, showing an unprecedented strategy for the simultaneous stabilization of a crystalline core and a glassy shell. Temperature dependent synchrotron radiation X-ray powder diffraction (SR-XRPD) and high resolution transmission electron microscopy (HR-TEM) analyses allow one to follow the crystalline core growth. A mechanism for the formation of a Bi2SiO5@g-SiO2 core-shell nanosystem is proposed. In addition, the easy tunability of the color output of the upconverting system is demonstrated by means of suitable doping lanthanide ions with potential applications in several fields.

CuO nanoparticle penetration through intact and damaged human skin

Trans-dermal in vitro study of CuO nanoparticles in contact with intact and damaged human skin using a Franz cell model.

Nano-metal oxides induce antimicrobial resistance via radical-mediated mutagenesis

The widespread use of nanoparticles has triggered increasing concern and interest due to the adverse effects on global public health and environmental safety. Whether the presence of nano-metal oxides (NMOs) could facilitate the formation of new antimicrobial resistance genes (ARGs) via de novo mutation is largely unknown. Here, we proved that two widely used NMOs could significantly improve the mutation frequencies of CIP- and CHL-resistant E. coli isolates; however, the corresponding metal ions have weaker effects. Distinct concentration-dependent increases of 1.0-14.2 and 1.1-456.3 folds were observed in the resistance mutations after treatment with 0.16-100 mg/L nano-Al₂O₃ and 0.16-500 mg/L nano-ZnO, respectively, compared with those in the control. The resistant mutants showed resistance to multiple antibiotics and hereditary stability after sub-culturing for 5 days. We also explored the mechanism underlying the induction of antimicrobial resistance by NMOs. Whole-genome sequencing analysis showed that the mutated genes correlated with mono- and multidrug resistance, as well as undetected resistance to antibiotics. Furthermore, NMOs significantly promoted intracellular reactive oxygen species (ROS), which would lead to oxidative DNA damage and an error-prone SOS response, and consequently, mutation rates were enhanced. Our findings indicate that NMOs could accelerate the mutagenesis of multiple-antibiotic resistance and expanded the understanding of the mechanisms in nanoparticle-induced resistance, which may be significant for guiding the production and application of nanoparticles.

Synergistic effect of cellulose nanofibres and bio- extracts for fabricating high strength sodium alginate based composite bio-sponges with antibacterial properties

This study investigates the synergistic potential of natural bio-extracts for preparing "all-natural" composite bio-sponges of sodium alginate (SA) with the reinforcement of a natural bio-nanomaterial i.e., cellulose nanofibres (CNFs). Aqueous suspensions of SA and CNFs in various combinations of bio-extracts (Rice water (Rw) and Giloy extract (Ge)) were freeze-dried to obtain the composite bio-sponges. Composites prepared using Rw resulted in structurally more stable samples with porosity above 75% that showed a compact honeycomb-like microstructure with interlocked CNFs network structures. A significant improvement in mechanical performance (400% increment in compressive strength and 800% increment in modulus) and thermal stability (decomposition temperature reaching up to 240 °C from 200 °C) for SA based composite bio-sponges was achieved due to the synergistic effect of Rw and CNFs as compared to conventionally prepared sponges in water. Additionally, the use of Ge has resulted in developing antimicrobial surfaces with up to 98% and 90% growth inhibition efficiency for gram-negative and gram-positive bacteria, respectively. Hence, CNFs and bio-extracts together played a competent role in effective tailoring of structural, thermo-mechanical and antibacterial properties of composite bio-sponges.

Treatment of Palm Oil Mill Effluent Using Membrane Bioreactor: Novel Processes and Their Major Drawbacks

Over the years, different types of alternative technologies have been developed and used for palm oil mill effluent (POME) treatment. Specifically, membrane bioreactor (MBR) has been employed to relegate pollutants contained in POME under different operating conditions, and the technology was found to be promising. The major challenge impeding the wider application of this technology is membrane fouling, which usually attracts high operating energy and running cost. In this regard, novel methods of mitigating membrane fouling through the treatment processes have been developed. Therefore, this review article specifically focuses on the recent treatment processes of POME using MBR, with particular emphasis on innovative processes conditions such as aerobic, anaerobic, and hybrid processing as well as their performance in relation to fouling minimization. Furthermore, the effects of sonication and thermophilic and mesophilic conditions on membrane blockage were critically reviewed. The types of foulants and fouling mechanism as influenced by different operating conditions were also analyzed censoriously.

Biosynthesis of cobalt oxide nanoparticles using endophytic fungus Aspergillus nidulans

Metallic oxide nanoparticles have profound applications in electrochemical devices, supercapacitors, biosensors and batteries. Though four fungi were isolated from Nothapodytes foetida, Aspergillus nidulans was found to be suitable for synthesis of cobalt oxide nanoparticles, as it has proficient tolerance towards metal under study. The broth containing precursor solution and organism Aspergillus nidulans had changed from pink to orange indicating the formation of nanoparticles. Characterization by x-ray diffraction analysis (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) and energy dispersive x-ray analysis (EDX) confirmed the formation of spinel cobalt oxide nanoparticles at an average size of 20.29 nm in spherical shape with sulfur-bearing proteins acting as a capping agent for the synthesized nanoparticles. The nanoparticles could be applied in energy storage, as a specific capacitance of 389 F/g showed competence. The study was a greener attempt to synthesize cobalt oxide nanoparticles using endophytic fungus.

Toxicity of Metal Oxide Nanoparticles

In the recent times, nanomaterials are used in many sectors of science, medicine and industry, without revealing its toxic effects. Thus, it is in urgent need for exploring the toxicity along with the application of such useful nanomaterials. Nanomaterials are categorized with a particle size of 1-100 nm. They have gained increasing attention because of their novel properties, including a large specific surface area and high reaction activity. The various fundamental and practical applications of nanomaterials include drug delivery, cell imaging, and cancer therapy. Nanosized semiconductors have their versatile applications in different areas such as catalysts, sensors, photoelectronic devices, highly functional and effective devices etc. Metal oxides contribute in many areas of chemistry, physics and materials science. Mechanism of toxicity of metal oxide nanoparticles can occur by different methods like oxidative stress, co-ordination effects, non-homeostasis effects, genotoxicity and others. Factors that affect the metal oxide nanoparticles were size, dissolution and exposure routes. This chapter will explain elaborately the toxicity of metal oxide nano structures in living beings and their effect in ecosystem.

ZnO nanoparticles modulate the ionic transport and voltage regulation of lysenin nanochannels

Background

The insufficient understanding of unintended biological impacts from nanomaterials (NMs) represents a serious impediment to their use for scientific, technological, and medical applications. While previous studies have focused on understanding nanotoxicity effects mostly resulting from cellular internalization, recent work indicates that NMs may interfere with transmembrane transport mechanisms, hence enabling contributions to nanotoxicity by affecting key biological activities dependent on transmembrane transport. In this line of inquiry, we investigated the effects of charged nanoparticles (NPs) on the transport properties of lysenin, a pore-forming toxin that shares fundamental features with ion channels such as regulation and high transport rate.

Results

The macroscopic conductance of lysenin channels greatly diminished in the presence of cationic ZnO NPs. The inhibitory effects were asymmetrical relative to the direction of the electric field and addition site, suggesting electrostatic interactions between ZnO NPs and a binding site. Similar changes in the macroscopic conductance were observed when lysenin channels were reconstituted in neutral lipid membranes, implicating protein-NP interactions as the major contributor to the reduced transport capabilities. In contrast, no inhibitory effects were observed in the presence of anionic SnO₂ NPs. Additionally, we demonstrate that inhibition of ion transport is not due to the dissolution of ZnO NPs and subsequent interactions of zinc ions with lysenin channels.

Conclusion

We conclude that electrostatic interactions between positively charged ZnO NPs and negative charges within the lysenin channels are responsible for the inhibitory effects on the transport of ions. These interactions point to a potential mechanism of cytotoxicity, which may not require NP internalization.

Electronic supplementary material

The online version of this article (10.1186/s12951-017-0327-9) contains supplementary material, which is available to authorized users.

Production of High-Value Nanoparticles via Biogenic Processes Using Aquacultural and Horticultural Food Waste

The quantities of organic waste produced globally by aquacultural and horticulture are extremely large and offer an attractive renewable source of biomolecules and bioactive compounds. The availability of such large and diverse sources of waste materials creates a unique opportunity to develop new recycling and food waste utilisation strategies. The aim of this review is to report the current status of research in the emerging field of producing high-value nanoparticles from food waste. Eco-friendly biogenic processes are quite rapid, and are usually carried out at normal room temperature and pressure. These alternative clean technologies do not rely on the use of the toxic chemicals and solvents commonly associated with traditional nanoparticle manufacturing processes. The relatively small number of research articles in the field have been surveyed and evaluated. Among the diversity of waste types, promising candidates and their ability to produce various high-value nanoparticles are discussed. Experimental parameters, nanoparticle characteristics and potential applications for nanoparticles in pharmaceuticals and biomedical applications are discussed. In spite of the advantages, there are a number of challenges, including nanoparticle reproducibility and understanding the formation mechanisms between different food waste products. Thus, there is considerable scope and opportunity for further research in this emerging field.

PVP and PEG doped CuO nanoparticles are more biologically active: Antibacterial, antioxidant, antidiabetic and cytotoxic perspective

Search for biologically active nanoparticles is prerequisite for biomedical applications. CuO nanoparticles synthesized by co-precipitation method are capped by polyethylene-glycol (PEG) and polyvinyl-pyrrolidone (PVP) on the surface by simple adsorption. Physical and chemical properties carried out by SEM, XRD and FTIR confirm nanometer in size and efficient capping of PVP and PEG on CuO NPs. Biological assays reveal higher activities of CuO-PEG and CuO-PVP as compared to the uncapped CuO nanoparticles. CuO-PEG shows better antitumor activity against Streptomyces as compared with CuO-PVP and CuO NPs. Both the capped NPs are significantly active for α-amylase inhibition assay. CuO-PVP demonstrates significantly better activity against bacterial strains followed by CuO-PEG and uncapped CuO. PVP coated CuO NPs also shows strong DPPH based free radical scavenging activity, total reducing power potential, total antioxidative potential and also carries flavonoid and phenolics properties determines to querecetin and gallic acid equivalence, respectively. It can be concluded that PVP and PEG capped CuO NPs are more capable to be used in biomedical applications as drug and diagnostic carrier molecules.

Actinomycetes-mediated biogenic synthesis of metal and metal oxide nanoparticles: progress and challenges

Actinomycetes-mediated biogenic synthesis of metal nanoparticles and their antimicrobial activities are well documented. Actinomycetes facilitate both intracellular and extracellular metal nanoparticles synthesis and are efficient candidates for the production of polydispersed, stable and ultra-small size metal nanoparticles. Secondary metabolites and new chemical entities derived from Actinomycetes have not been extensively studied for the synthesis of metal/metal oxide nanoparticles. The present review focuses on biogenic synthesis of metal nanoparticles from Actinomycetes and the scope for exploring Actinomycetes-derived compounds (enzymes, organics acids and bioactive compounds) as metal and metal oxide reducing agents for the synthesis of desired nanoparticles. This review also focuses on challenges faced in the applications of nanoparticles and the methods to synthesize biogenic metal nanoparticles with desired physiochemical properties such as ultra-small size, large surface to mass ratio, high reactivity etc. Methods to evade their toxicity and unique interactions with biological systems to improve their chance as an alternative therapeutic agent in medical and pharmaceutical industry are also discussed.

Recent advances in green nanoparticulate systems for drug delivery: efficient delivery and safety concern

Nanotechnology manipulates therapeutic agents at the nanoscale for the development of nanomedicines. However, there are current concerns over nanomedicines, mainly related to the possible toxicity of nanomaterials used for health medications. Due to their small size, they can enter the human body more readily than larger sized particles. Green chemistry encompasses the green synthesis of drug-loaded nanoparticles by reducing the use of hazardous materials in the synthesis process, thus reducing the adverse health impacts of pharmaceutics. This would greatly expand their potential in biomedical treatments. This review highlights the potential risks of nanomedicine formulations to health, delivery routes of green nanomedicines, recent advances in the development of green nanoscale systems for biomedical applications and future perspectives for the green development of nanomedicines.

Which Metals are Green for Catalysis? Comparison of the Toxicities of Ni, Cu, Fe, Pd, Pt, Rh, and Au Salts

Environmental profiles for the selected metals were compiled on the basis of available data on their biological activities. Analysis of the profiles suggests that the concept of toxic heavy metals and safe nontoxic alternatives based on lighter metals should be re-evaluated. Comparison of the toxicological data indicates that palladium, platinum, and gold compounds, often considered heavy and toxic, may in fact be not so dangerous, whereas complexes of nickel and copper, typically assumed to be green and sustainable alternatives, may possess significant toxicities, which is also greatly affected by the solubility in water and biological fluids. It appears that the development of new catalysts and novel applications should not rely on the existing assumptions concerning toxicity/nontoxicity. Overall, the available experimental data seem insufficient for accurate evaluation of biological activity of these metals and its modulation by the ligands. Without dedicated experimental measurements for particular metal/ligand frameworks, toxicity should not be used as a "selling point" when describing new catalysts.

Contribution of silver nanoparticles to extend Salmonella typhimurium growth under various respiration regimes

Living cells interact with different forms of metal; the resulted biochemical alteration depends on the dose. Over an average dose in ionic form, metals interact with respiration processes at various levels, and it induces oxidative stress by shifting the whole oxydoreduction equilibrium. To correct the toxicity, cell develops different ways to cancel the effect of the exceeded charges, and it reduces the ion to get a more stable form. In the case of nanoparticles, the reactivity of surface has been enhanced that can alter the biological mechanisms; the cell may develop different strategies to minimize this reactivity. The current study is focused on the pursuing of cell behavior regarding the presence of nanoparticles and their associated metals. Nanoparticles have been synthesized using bio-reducing agents and then were structurally characterized using X-ray diffraction, UV-Vis, and infra-red spectroscopy. The oxydoreduction flexibility of the post-synthesis modified nanoparticles was tested in vitro. Interactions with cells were done using Salmonella under various respiration conditions. The final results show the possible correction of oxidative stress effects and the recuperation of respiration.

Force Field Development for Lipid Membrane Simulations

With the rapid development of computer power and wide availability of modelling software computer simulations of realistic models of lipid membranes, including their interactions with various molecular species, polypeptides and membrane proteins have become feasible for many research groups. The crucial issue of the reliability of such simulations is the quality of the force field, and many efforts, especially in the latest several years, have been devoted to parametrization and optimization of the force fields for biomembrane modelling. In this review, we give account of the recent development in this area, covering different classes of force fields, principles of the force field parametrization, comparison of the force fields, and their experimental validation. This article is part of a Special Issue entitled: Biosimulations edited by Ilpo Vattulainen and Tomasz Róg.