An Overview of the Synthesis of Gold Nanoparticles Using Radiation Technologies

Mechanism of Producing Metallic Nanoparticles, with an Emphasis on Silver and Gold Nanoparticles, Using Bottom-Up Methods

Bottom-up nanoparticle (NP) formation is assumed to begin with the reduction of the precursor metallic ions to form zero-valent atoms. Studies in which this assumption was made are reviewed. The standard reduction potential for the formation of aqueous metallic atoms-E0(Mn+aq/M0aq)-is significantly lower than the usual standard reduction potential for reducing metallic ions Mn+ in aqueous solution to a metal in solid state. E0(Mn+aq/M0solid). E0(Mn+aq/M0aq) values are negative for many typical metals, including Ag and Au, for which E0(Mn+aq/M0solid) is positive. Therefore, many common moderate reduction agents that do not have significantly high negative reduction standard potentials (e.g., hydrogen, carbon monoxide, citrate, hydroxylamine, formaldehyde, ascorbate, squartic acid, and BH4-), and cannot reduce the metallic cations to zero-valent atoms, indicating that the mechanism of NP production should be reconsidered. Both AgNP and AuNP formations were found to be multi-step processes that begin with the formation of clusters constructed from a skeleton of M+-M+ (M = Ag or Au) bonds that is followed by the reduction of a cation M+ in the cluster to M0, to form Mn0 via the formation of NPs. The plausibility of M+-M+ formation is reviewed. Studies that suggest a revised mechanism for the formation of AgNPs and AuNPs are also reviewed.

Gold Nanoparticles Synthesis and Antimicrobial Effect on Fibrous Materials

Depositing nanoparticles in textiles have been a promising strategy to achieve multifunctional materials. Particularly, antimicrobial properties are highly valuable due to the emergence of new pathogens and the spread of existing ones. Several methods have been used to functionalize textile materials with gold nanoparticles (AuNPs). Therefore, this review highlighted the most used methods for AuNPs preparation and the current studies on the topic in order to obtain AuNPs with suitable properties for antimicrobial applications and minimize the environmental concerns in their production. Reporting the detailed information on the functionalization of fabrics, yarns, and fibers with AuNPs by different methods to improve the antimicrobial properties was the central objective. The studies combining AuNPs and textile materials have opened valuable opportunities to develop antimicrobial materials for health and hygiene products, as infection control and barrier material, with improved properties. Future studies are needed to amplify the antimicrobial effect of AuNPs onto textiles and minimize the concerns related to the synthesis.

Traditional usage and biological activity of Plectranthus madagascariensis and its varieties: A review

ETHNOPHARMACOLOGICAL RELEVANCE

Plectranthus madagascariensis (Pers.) Benth. is an indigenous aromatic South African plant species that are traditionally used to treat various dermatological and respiratory ailments.

AIM OF THE STUDY

Three varieties of P. madagascariensis exist in South Africa, namely, Plectranthus aliciae (Codd) van Jaarsv. & T.J. Edwards, Plectranthus ramosior (Benth.) Van Jaarsv. and Plectranthus madagascariensis (Pers.) Benth var. madagascariensis. This article summarizes the documented ethnobotanical uses and research which has been conducted to date on the chemical constituents and biological effects of P. madagascariensis and its varieties. This review aimed to investigate and highlight the lack scientific reports of the potential activity of these varieties based on their traditional usage and to emphasise the need for further investigation of the benefits of P. madagascariensis and its varieties.

MATERIALS AND METHODS

Extensive database retrieval using platforms not limited to but including Google Scholar, ScienceDirect and PubMed, was performed by using keywords such as "Plectranthus madagascariensis" "Plectranthus madagascariensis var. aliciae", "Plectranthus aliciae", "Plectranthus ramosior", "Plectranthus madagascariensis var. ramosior" and "Plectranthus hirtus" In addition, relevant books and digital documentation were consulted to collect all available scientific literature to provide a comprehensive review.

RESULTS

Several studies have reported the traditional usage of P. madagascariensis for the treatment of diseases related to the respiratory system such as coughs, colds and asthma as well as dermatological disorders associated with wounds and inflammation. Whilst there are no reports on the traditional usage of P. madagascariensis varieties to treat other maladies, several other species within the genus are used in other traditional practices. Plectranthus ramosior is used as a toxin for fishing. In literature, seven major phytochemical compounds have been identified from P. madagascariensis. Its extract and essential oil contain polyphenols, abietane diterpenes and abietane diterpenes with a quinone moiety. The extracts and major chemical constituents of P. madagascariensis and its major phytochemicals have reported activity against several biological targets. Reports relating to the antibacterial activity of P. madagascariensis against microbes associated with tuberculosis and wound infections has been consistent and correlates with the documented traditional usage of the plant. Literature reported on the antibacterial activity of P. aliciae targeting bacteria associated with wound infections and lung cancer cells. No further literature reports of the biological activity of the other P. madagascariensis varieties have been found. Other noteworthy biological activities reported in the literature of P. madagascariensis and its compounds include their activities against targets of Alzheimer's disease and breast cancer, in particular. This activity is not related to the traditional usage of the plant.

CONCLUSION

Plectranthus madagascariensis and its compounds have been proven to be effective in treating a range of maladies. Based on the extensive literature on this plant, it can be concluded that numerous in vitro pharmacological activities of P. madagascariensis have been reported. However, there is a lack of information available for this species with regards to its in vivo data including both pre-clinical and clinical studies. Since the extract of P. madagascariensis and its isolated compounds have displayed noteworthy anticancer potential, we recommend further investigation of pharmacokinetic studies to be included in future research.

Insights into Terminal Sterilization Processes of Nanoparticles for Biomedical Applications

Nanoparticles possess a huge potential to be employed in numerous biomedical purposes; their applications may include drug delivery systems, gene therapy, and tissue engineering. However, the in vivo use in biomedical applications requires that nanoparticles exhibit sterility. Thus, diverse sterilization techniques have been developed to remove or destroy microbial contamination. The main sterilization methods include sterile filtration, autoclaving, ionizing radiation, and nonionizing radiation. Nonetheless, the sterilization processes can alter the stability, zeta potential, average particle size, and polydispersity index of diverse types of nanoparticles, depending on their composition. Thus, these methods may produce unwanted effects on the nanoparticles' characteristics, affecting their safety and efficacy. Moreover, each sterilization method possesses advantages and drawbacks; thus, the suitable method's choice depends on diverse factors such as the formulation's characteristics, batch volume, available methods, and desired application. In this article, we describe the current sterilization methods of nanoparticles. Moreover, we discuss the advantages and drawbacks of these methods, pointing out the changes in nanoparticles' biological and physicochemical characteristics after sterilization. Our main objective was to offer a comprehensive overview of terminal sterilization processes of nanoparticles for biomedical applications.

Current Strategies for Noble Metal Nanoparticle Synthesis

Noble metals have played an integral part in human history for centuries; however, their integration with recent advances in nanotechnology and material sciences have provided new research opportunities in both academia and industry, which has resulted in a new array of advanced applications, including medical ones. Noble metal nanoparticles (NMNPs) have been of great importance in the field of biomedicine over the past few decades due to their importance in personalized healthcare and diagnostics. In particular, platinum, gold and silver nanoparticles have achieved the most dominant spot in the list, thanks to a very diverse range of industrial applications, including biomedical ones such as antimicrobial and antiviral agents, diagnostics, drug carriers and imaging probes. In particular, their superior resistance to extreme conditions of corrosion and oxidation is highly appreciated. Notably, in the past two decades there has been a tremendous advancement in the development of new strategies of more cost-effective and robust NMNP synthesis methods that provide materials with highly tunable physicochemical, optical and thermal properties, and biochemical functionalities. As a result, new advanced hybrid NMNPs with polymer, graphene, carbon nanotubes, quantum dots and core-shell systems have been developed with even more enhanced physicochemical characteristics that has led to exceptional diagnostic and therapeutic applications. In this review, we aim to summarize current advances in the synthesis of NMNPs (Au, Ag and Pt).

Hybrid Nanosystems for Biomedical Applications

Inorganic/organic hybrid nanosystems have been increasingly developed for their versatility and efficacy at overcoming obstacles not readily surmounted by nonhybridized counterparts. Currently, hybrid nanosystems are implemented for gene therapy, drug delivery, and phototherapy in addition to tissue regeneration, vaccines, antibacterials, biomolecule detection, imaging probes, and theranostics. Though diverse, these nanosystems can be classified according to foundational inorganic/organic components, accessory moieties, and architecture of hybridization. Within this Review, we begin by providing a historical context for the development of biomedical hybrid nanosystems before describing the properties, synthesis, and characterization of their component building blocks. Afterward, we introduce the architectures of hybridization and highlight recent biomedical nanosystem developments by area of application, emphasizing hybrids of distinctive utility and innovation. Finally, we draw attention to ongoing clinical trials before recapping our discussion of hybrid nanosystems and providing a perspective on the future of the field.

Use of cellulose nanofibril (CNF)/silver nanoparticles (AgNPs) composite in salt hydrate phase change material for efficient thermal energy storage

Salt hydrate phase change materials (PCMs) possess the challenge of supercooling, which must be addressed to allow more efficient energy storage and utilisation. In this work, cellulose nanofibril (CNF), a versatile biopolymer was used to support and disperse silver nanoparticles (AgNPs), and the synthesised CNF/AgNPs composite was used to improve the performance of sodium acetate trihydrate (SAT). Results showed that CNF dispersed the AgNPs uniformly and prevented their aggregation. Through the synergistic effect of 1% CNF/AgNPs and 2% sodium phosphate dibasic dodecahydrate, a low supercooling degree of 1.2 °C was achieved. Moreover, AgNPs were uniformly distributed in the prepared PCM composite. Differential scanning calorimetry results indicated that the prepared PCM@CNF/AgNPs _0.02 composite showed a similar melting point (57.4 °C) and enthalpy (269 kJ/kg), compared to those of pure SAT. Thermogravimetric analysis showed that the PCM composite did not lose all moisture until a heating temperature of 160 °C, showing improved thermal stability. The thermal conductivity of PCM@CNF/AgNPs _0.02 composite was 31.6% higher than that of SAT. The enthalpy of this composite decreased only around 2% after 100 melting/freezing cycles, showing satisfying thermal reliability. This composite can therefore be used to fabricate high-performance TES systems with negligible supercooling and improved thermal properties.

Improving the rate of the copper-catalyzed Henry reaction by surface plasmon excitation of gold nanoparticles

Green plasmon excitation of colloidal Au nanoparticles, onto which a copper(ii) complex was grafted, in the presence of nitrobenzaldehyde and nitromethane in DMF, lead to the formation of the corresponding nitroaldol with high efficiency.

Anti-bacterial activity of gold nanocomposites as a new nanomaterial weapon to combat photogenic agents: recent advances and challenges

Gold nanocomposites are being widely used in numerous biomedical applications owing to their excellent stability and miniaturization. Gold nanocomposites are notable because of their flexibility of functionalization and synthesis, ease of detection, and low toxicity. Cost-effectiveness, long-term stability, non-cytotoxicity, and biocompatibility are the main aspects of ideal nanocomposites. Antibacterial nanocomposites are being developed extensively in the food industry, environmental applications, and biological and medical devices. This review focuses on the applications of metal-based nanoparticles, mainly gold nanoparticles (AuNPs), as antibacterial agents in medical approaches. Additionally, the antibacterial mechanisms of AuNPs and their roles in fighting antibiotic-resistant microorganisms are highlighted in the present review.

Gold nanocomposites are being widely used in numerous biomedical applications owing to their excellent stability and miniaturization.

Effect of ultrasonic irradiation power on sonochemical synthesis of gold nanoparticles

In this work, optimized size distribution and optical properties in the colloidal synthesis of gold nanoparticles (GNPs) were obtained using a proposed ultrasonic irradiation assisted Turkevich-Frens method. The effect of three nominal ultrasound (20 kHz) irradiation powers: 60, 150, and 210 W have been analyzed as size and shape control parameters. The GNPs colloidal solutions were obtained from chloroauric acid (HAuCl₄) and trisodium citrate (C₆H₅Na₃O₇·2H₂O) under continuous irradiation for 1 h without any additional heat or stirring. The surface plasmon resonance (SPR) was monitored in the UV-Vis spectra every 10 min to found the optimal time for localized SPR wavelength (λ_LSPR), and the 210 sample procedure has reduced the λ_LSPR localization at 20 min, while 150 and 60 samples have showed λ_LSPR at 60 min. The nucleation and growth of GNPs showed changes in shape and size distribution associated with physical (cavitation, temperature) and chemical (radical generation, pH) conditions in the aqueous solution. The results showed quasi-spherical GNPs as pentakis dodecahedron (λ_LSPR = 560 nm), triakis icosahedron (λ_LSPR = 535 nm), and tetrakis hexahedron (λ_LSPR = 525 nm) in a size range from 12 to 16 nm. Chemical effects of ultrasound irradiation were suggested in the disproportionation process, electrons of AuCl₂^- are rapidly exchanged through the gold surface. After AuCl₄^- and Cl^- were desorbed, a tetrachloroaurate complex was recycled for the two-electron reduction by citrate, aurophilic interaction between complexes AuCl₂^-, electrons exchange, and gold seeds, the deposition of new gold atoms on the surface promoting the growth of GNPs. These mechanisms are enhanced by the effects of ultrasound, such as cavitation and transmitted energy into the solution. These results show that the plasmonic response from the reported GNPs can be tuned using a simple methodology with minimum infrastructure requirements. Moreover, the production method could be easily scalable to meet industrial manufacturing needs.

Radiolabeled Gold Nanoparticles for Imaging and Therapy of Cancer

In the Last decades, nanotechnology has provided novel and alternative methodologies and tools in the field of medical oncology, in order to tackle the issues regarding the control and treatment of cancer in modern society. In particular, the use of gold nanoparticles (AuNPs) in radiopharmaceutical development has provided various nanometric platforms for the delivery of medically relevant radioisotopes for SPECT/PET diagnosis and/or radionuclide therapy. In this review, we intend to provide insight on the methodologies used to obtain and characterize radiolabeled AuNPs while reporting relevant examples of AuNPs developed during the last decade for applications in nuclear imaging and/or radionuclide therapy, and highlighting the most significant preclinical studies and results.

Can an InChI for Nano Address the Need for a Simplified Representation of Complex Nanomaterials across Experimental and Nanoinformatics Studies?

Chemoinformatics has developed efficient ways of representing chemical structures for small molecules as simple text strings, simplified molecular-input line-entry system (SMILES) and the IUPAC International Chemical Identifier (InChI), which are machine-readable. In particular, InChIs have been extended to encode formalized representations of mixtures and reactions, and work is ongoing to represent polymers and other macromolecules in this way. The next frontier is encoding the multi-component structures of nanomaterials (NMs) in a machine-readable format to enable linking of datasets for nanoinformatics and regulatory applications. A workshop organized by the H2020 research infrastructure NanoCommons and the nanoinformatics project NanoSolveIT analyzed issues involved in developing an InChI for NMs (NInChI). The layers needed to capture NM structures include but are not limited to: core composition (possibly multi-layered); surface topography; surface coatings or functionalization; doping with other chemicals; and representation of impurities. NM distributions (size, shape, composition, surface properties, etc.), types of chemical linkages connecting surface functionalization and coating molecules to the core, and various crystallographic forms exhibited by NMs also need to be considered. Six case studies were conducted to elucidate requirements for unambiguous description of NMs. The suggested NInChI layers are intended to stimulate further analysis that will lead to the first version of a "nano" extension to the InChI standard.

Redispersion of cryoaggregated gold nanoparticle by means of laser irradiation and effect on biological interactions

Agglomeration/aggregation is an indispensable phenomenon observed by different nanoparticles. In the present study, commercial grade (50 nm) and chemically synthesized (40 nm) gold nanoparticles (AuNPs) were aggregated at sub-zero temperatures, followed by disruption of the AuNP aggregates via nanosecond laser-ablation and subsequent effect on biological interactions. AuNPs were characterized pre/post laser-ablation via UV-visible spectroscopy, transmission electron microscopy, atomic force microscopy, etc. The process of freezing (aggregation) and laser-ablation (dispersion) was performed multiple times, in order to compare the yield of nanoparticles after each cycle of laser-ablation. Further, AuNPs pre/post laser-ablation were assessed for cytotoxicity, protein-corona formation, and cell-uptake by in vitro studies using RAW264.7, Caco-2 and Neuro-2 a cell lines. Aggregates for both the types of AuNPs displayed fragmentation following first cycle of laser-ablation. In addition, AuNPs obtained after fragmentation of the aggregates showed reduction in diameter and reshaping, as compared to native AuNPs. The size and shape of the nanoparticles after second and third cycle of laser-ablation was same as that obtained after first cycle of ablation. Both laser-ablated and native AuNPs showed similar effects on viability of RAW 264.7 and Caco-2 cells, after 24 h and 48 h of exposure. Cell uptake of native and laser-ablated AuNPs was observed to be a size dependent phenomenon. Present findings showed that nanosecond laser ablation of cryoaggregated AuNPs lead to changes in the physical properties of AuNPs post ablation like size and shape, however, biological interaction with cells remained same. This work is first report on biological interactions of AuNPs generated via laser-ablation of cryoaggregated AuNPs.

Active targeting of gold nanoparticles as cancer therapeutics

Gold nanoparticles (AuNPs) are of increasing interest for their unique properties and their biocompatability, minimal toxicity, multivalency and size tunability make them exciting drug carriers. The functionalisaton of AuNPs with targeting moieties allows for their selective delivery to cancers, with antibodies, proteins, peptides, aptamers, carbohydrates and small molecules all exploited. Here, we review the recent advances in targeted-AuNPs for the treatment of cancer, with a particular focus on these classes of targeting ligands. We highlight the benefits and potential drawbacks of each ligand class and propose directions in which the field could grow.

Effective targeting of breast cancer cells (MCF7) via novel biogenic synthesis of gold nanoparticles using cancer-derived metabolites

Biogenic synthesis of nanoparticles provides many advantages over synthetic nanoparticles including clean and non-toxic approaches. Nanoparticle-based application for the development of diagnostics and therapeutics is a promising field that requires further enrichment and investigation. The use of biological systems for the generation of gold nanoparticles (AuNPs) has been extensively studied. The search for a biocompatibility approach for the development of nanoparticles is of great interest since it can provide more targeting and less toxicity. Here, we reported a bio-reductive approach of gold to AuNPs using metabolites extracted from mammalian cells, which provided a simple and efficient way for the synthesis of nanomaterials. AuNPs were more efficiently synthesized by the metabolites extracted from breast cancer (MCF7) and normal fibroblasts (F180) cells when compared to metabolites extracted from cell-free supernatants. The metabolites involved in biogenic synthesis are mainly alcohols and acids. Spectroscopic characterization using UV-visible spectra, morphological characterization using electron microscopy and structural characterization using X-ray diffraction (XRD) confirmed the AuNPs synthesis from mammalian cells metabolites. AuNPs generated from MCF7 cells metabolites showed significant anticancer activities against MCF7 and low toxicity when compared to those generated from F180 cells metabolites. The results reflected the cytotoxic activities of the parent metabolites extracted from MCF7 versus those extracted from F180. Comparative metabolomics analysis indicated that MCF7-generated AuNPs harbored tetratetracontane, octacosane, and cyclotetradecane while those generated from F180 harbored a high percentage of stearic, palmitic, heptadecanoic acid. We related the variation in cytotoxic activities between cell types to the differences in AuNPs-harboring metabolites. The process used in this study to develop the nanoparticles is novel and should have useful future anticancer applications mainly because of proper specific targeting to cancer cells.

Development of a Hyaluronic Acid-Based Nanocarrier Incorporating Doxorubicin and Cisplatin as a pH-Sensitive and CD44-Targeted Anti-Breast Cancer Drug Delivery System

Tumor-targeting nanomaterial-based chemotherapeutic drug delivery systems have been shown to represent an efficacious approach for the treatment of cancer because of their stability in blood circulation and predictable delivery patterns, enhanced tumor-selective drug accumulation, and decreased toxicity to normal tissues. The cell-surface transmembrane glycoprotein CD44 binds to the extracellular domain of hyaluronic acid (HA), and is overexpressed in breast, ovarian, lung, and stomach cancer. In this study, an HA-based nano-carrier incorporating doxorubicin (DOX) and cisplatin (CDDP) was synthesized as a CD44-targeting anti-cancer drug delivery system, and its tumor inhibition effects against CD44⁺ breast cancer cells were evaluated in vitro and in vivo. These dual drug-loaded HA micelles (HA-DOX-CDDP) exhibited significantly enhanced drug release under acidic conditions, and showed higher cellular uptake and stronger cellular growth inhibition than free drugs against 4T1 (CD44⁺) breast cancer cells. In contrast, no significant differences in growth inhibition and cellular uptake were observed between HA-DOX-CDDP and free drugs in NIH-3T3 (CD44^-) control cells. Furthermore, HA-DOX-CDDP micelles exhibited stronger inhibitory effects and lower systemic toxicity than free drugs in a 4T1 mammary cancer-bearing mouse model, as determined using immunofluorescence and histological analyses. Therefore, HA-DOX-CDDP micelles represent a promising drug delivery system that exhibits acid-sensitive drug release, CD44-targeted delivery, and excellent biocompatibility and biodegradation. These properties resulted in excellent tumor accumulation and reduced adverse effects, indicating that HA-DOX-CDDP micelles have promising potential applications in chemotherapy for breast cancer.

Nanomaterial integration into the scaffolding materials for nerve tissue engineering: a review

The nervous system, which consists of a complex network of millions of neurons, is one of the most highly intricate systems in the body. This complex network is responsible for the physiological and cognitive functions of the human body. Following injuries or degenerative diseases, damage to the nervous system is overwhelming because of its complexity and its limited regeneration capacity. However, neural tissue engineering currently has some capacities for repairing nerve deficits and promoting neural regeneration, with more developments in the future. Nevertheless, controlling the guidance of stem cell proliferation and differentiation is a challenging step towards this goal. Nanomaterials have the potential for the guidance of the stem cells towards the neural lineage which can overcome the pitfalls of the classical methods since they provide a unique microenvironment that facilitates cell-matrix and cell-cell interaction, and they can manipulate the cell signaling mechanisms to control stem cells' fate. In this article, the suitable cell sources and microenvironment cues for neuronal tissue engineering were examined. Afterward, the nanomaterials that impact stem cell proliferation and differentiation towards neuronal lineage were reviewed.

Structural and functional analyses of organic molecules regulating biomineralization

Biomineralization by living organisms are common phenomena observed everywhere. Molluskan shells are representative biominerals that have fine microstructures with controlled morphology, polymorph, and orientation of CaCO3 crystals. A few organic molecules involved in the biominerals play important roles in the formation of such microstructures. Analyses of structure–function relationships for matrix proteins in biominerals revealed that almost all matrix proteins have an acidic region for the binding of calcium ion in CaCO3 crystals and interaction domains for other organic molecules. On the other hand, biomineralization of metal nanoparticles by microorganisms were also investigated. Gold nanoparticles and quantum dots containing cadmium were successfully synthesized by bacteria or a fungus. The analyses of components revealed that glycolipids, oligosaccharides, and lactic acids have key roles to synthesize the gold nanoparticle in Lactobacillus casei as reductants and dispersants. These researches about biomineralization will give new insights for material and environmental sciences in the human society.

Utilization of plant-derived Myricetin molecule coupled with ultrasound for the synthesis of gold nanoparticles against breast cancer

Phytochemical mediated synthesis of nanoparticles has gained great interest in the field of cancer therapeutics. We attempted a simple and stable synthesis of gold nanoparticles (AuNPs) with Myricetin (Myr) adopting ultrasound-assisted method. Further, we evaluated anticancer activity of the synthesized nanoparticles. The physico-chemical properties of biosynthesized Myr-AuNPs were characterized by UV-visible spectrophotometer, Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and particle size analysis. The study reports of Myr-AuNPs showed spherical-shaped particles with a size of < 50 nm. Stability of the particles was increased in various physiological media. Furthermore, the graph theoretical network analysis of Myr-AuNPs indicated that the probable binding with the mTOR is an effective target for breast cancer cells. In silico molecular docking study of Myr-AuNPs in human mTOR kinase was found to be strong binding. The IC₅₀ value of Myr-AuNPs was calculated as 13 μg mL^-1 against MCF-7 cell line. The AO/EB and DAPI stainings confirmed the anticancer activity by Myr-AuNPs-treated cells showed a good proportion of dead cells evidenced with formation of pro-apoptotic bodies. In addition, Myr-AuNPs exhibited depolarization of mitochondrial membrane potential and production of reactive oxygen species. This study proves that Myr-AuNPs holds great promise to use against breast cancer as a potent anticancer drug. Graphical abstract A schematic representation for the biosynthesis of Myr-AuNPs.

Synthesis and characterization of L-asparagine stabilised gold nanoparticles: Catalyst for degradation of organic dyes

L-asparagine functionalized gold nanoparticles (Asp-AuNPs), have been synthesized by reducing HAuCl₄ in presence of L-asparagine at 70 °C for 8 h. Asp-AuNPs were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS); the nanoparticles formed were spherical in shape with average size of 13.5 ± 3.7 nm. Synthesized Asp-AuNPs were found to exhibit excellent catalytic properties for the degradation of different organic dyes viz. Rhodamine B (RB), methyl orange (MO), acid red 27 (amaranth) and xylenol orange (XO) in the presence of sodium borohydride (NaBH₄). Asp-AuNPs acts as electron relay system and serve as effective catalyst for complete degradation of all the tested dyes. Rate kinetic investigations suggested that catalysed degradation reactions follow pseudo-first order reaction kinetics with rate constant of 0.904 min^-1, 0.314 min^-1, 0.228 min^-1 and 0.1 min^-1 for RB, MO, amaranth and XO respectively.

One-Step Synthesis of Polypyrrole-Coated Gold Nanoparticles for Use as a Photothermally Active Nano-System

OBJECTIVE

This paper introduces a simple one-step and ultra-fast method for synthesis of highly photothermally active polypyrrole-coated gold nanoparticles. The synthesis process is so simple that the reaction is very fast without the need for any additives or complicated steps.

METHODOLOGY

Polypyrrole-coated gold nanoparticles (AuPpy NPs) were synthesized by reacting chloroauric acid (HAuCl4) with pyrrole (monomer) in aqueous medium at room temperature. These nanoparticles were characterized by UV-visible-NIR spectrometry, transmission electron microscopy (TEM), AC conductivity, zeta sizer and were evaluated for dark cytotoxicity and photocytotoxicity using human hepatocellular carcinoma (HepG2) cell line as a model for cancer cells.

RESULTS

The synthesized AuPpy NPs showed a peak characteristic for gold nanoparticles (530-600 nm, molar ratio dependent) and a wide absorption band along the visible-NIR region with intensity about triple or even quadruple that of polypyrrole synthesized by the conventional FeCl3 method at the same concentration and under the same conditions. TEM imaging showed that the synthesized AuPpy NPs were composed of spherical or semi-spherical gold core(s) of about 4-10 nm coated with distinct layer(s) of polypyrrole seen either loosely or in clusters. Mean sizes of the synthesized nanoparticles range between ~25 and 220 nm (molar ratio dependent). Zeta potentials of the AuPpy NPs preparations indicate their good colloidal stability. AC conductivity values of AuPpy NPs highly surpass that of Ppy prepared by the conventional FeCl3 method. AuPpy NPs were non-toxic even at high concentrations (up to 1000 µM pyrrole monomer equivalent) under dark conditions. Unlikely, light activated the photothermal activity of AuPpy NPs in a dose-dependent manner.

CONCLUSION

This method simply and successfully synthesized AuPpy NPs nanoparticles that represent a safe alternative photothermally active multifunctional tool instead of highly toxic and non-biodegradable gold nanorods.

Gold Nanoparticles Synthesis Using Stainless Steel as Solid Reductant: A Critical Overview

Gold nanoparticles (AuNPs) were produced using stainless steel as a solid reductant to assist the synthesis of metal NPs, using HAuCl₄ as a precursor. This method is very easy, quick, and cost-effective, allowing the synthesis of highly stable NPs without additional capping agents. However, the reaction mechanism is still under debate. In order to contribute to the investigation of the synthesis of AuNPs using stainless steel, different experimental conditions were tested. Cl⁻ concentration, pH of the precursor solution, as well as stainless steel composition were systematically changed. The syntheses were performed recording the open circuit potential to potentiometrically explore the electrochemical properties of the system, under operando conditions. Spectroscopic and morphological characterizations were carried out along with potentiometric monitoring, aiming at correlating the synthesis parameters with the AuNPs characteristics. As a result, an overview of the process features, and of its most reasonable mechanism were obtained.

Recent Advances of Plasmonic Gold Nanoparticles in Optical Sensing and Therapy

:

Gold nanoparticles with special surface plasmon resonance have been widely used in sensing and therapy because of their easy preparation, unique optical properties, excellent biocompatibility, etc. The applications of gold nanoparticles in chemo/biosensing, imaging, and therapy reported in 2016-2019, are summarized in this review. Regarding the gold nanoparticle-based sensing or imaging, sensing mechanisms and strategies are provided to illustrate the concepts for designing sensitive and selective detection platforms. Gold nanoparticlemediated therapy is introduced by surface plasmon resonance-based therapy and delivery-based therapy. Beyond the sole therapeutic system, platforms through synergistic therapy are also discussed. In the end, discussion of the challenges and future trends of gold nanoparticle-based sensing and therapy systems is described.

Colorimetric detection of creatinine using its specific binding peptides and gold nanoparticles

A new selective detection method was developed for creatinine by combining gold nanoparticles (GNPs) and peptide probes which were screened and selected using phage-display technology.

Targeting microRNAs as a Therapeutic Strategy to Reduce Oxidative Stress in Diabetes

Diabetes mellitus is a group of heterogeneous metabolic disorders characterized by chronic hyperglycaemia as a consequence of pancreatic β cell loss and/or dysfunction, also caused by oxidative stress. The molecular mechanisms involved inβ cell dysfunction and in response to oxidative stress are also regulated by microRNAs (miRNAs). miRNAs are a class of negative gene regulators, which modulate pathologic mechanisms occurring in diabetes and its complications. Although several pharmacological therapies specifically targeting miRNAs have already been developed and brought to the clinic, most previous miRNA-based drug delivery methods were unable to target a specific miRNA in a single cell type or tissue, leading to important off-target effects. In order to overcome these issues, aptamers and nanoparticles have been described as non-cytotoxic vehicles for miRNA-based drug delivery. These approaches could represent an innovative way to specifically target and modulate miRNAs involved in oxidative stress in diabetes and its complications. Therefore, the aims of this review are: (i) to report the role of miRNAs involved in oxidative stress in diabetes as promising therapeutic targets; (ii) to shed light onto the new delivery strategies developed to modulate the expression of miRNAs in diseases.

Green pyomelanin-mediated synthesis of gold nanoparticles: modelling and design, physico-chemical and biological characteristics

BACKGROUND

Synthesis of nanoparticles (NPs) and their incorporation in materials are amongst the most studied topics in chemistry, physics and material science. Gold NPs have applications in medicine due to their antibacterial and anticancer activities, in biomedical imaging and diagnostic test. Despite chemical synthesis of NPs are well characterized and controlled, they rely on the utilization of harsh chemical conditions and organic solvent and generate toxic residues. Therefore, greener and more sustainable alternative methods for NPs synthesis have been developed recently. These methods use microorganisms, mainly yeast or yeast cell extract. NPs synthesis with culture supernatants are most of the time the preferred method since it facilitates the purification scheme for the recovery of the NPs. Extraction of NPs, formed within the cells or cell-wall, is laborious, time-consuming and are not cost effective. The bioactivities of NPs, namely antimicrobial and anticancer, are known to be related to NPs shape, size and size distribution.

RESULTS

Herein, we reported on the green synthesis of gold nanoparticles (AuNPs) mediated by pyomelanin purified from the yeast Yarrowia lipolytica. A three levels four factorial Box-Behnken Design (BBD) was used to evaluate the influence of temperature, pH, gold salt and pyomelanin concentration on the nanoparticle size distribution. Based on the BBD, a quadratic model was established and was applied to predict the experimental parameters that yield to AuNPs with specific size. The synthesized nanoparticles with median size value of 104 nm were of nanocrystalline structure, mostly polygonal or spherical. They exhibited a high colloidal stability with zeta potential of - 28.96 mV and a moderate polydispersity index of 0.267. The absence of cytotoxicity of the AuNPs was investigated on two mammalian cell lines, namely mouse fibroblasts (NIH3T3) and human osteosarcoma cells (U2OS). Cell viability was only reduced at AuNPs concentration higher than 160 µg/mL. Moreover, they did not affect on the cell morphology.

CONCLUSION

Our results indicate that different process parameters affect significantly nanoparticles size however with the mathematical model it is possible to define the size of AuNPs. Moreover, this melanin-based gold nanoparticles showed neither cytotoxicity effect nor altered cell morphology.

Nanovectors Design for Theranostic Applications in Colorectal Cancer

Colorectal cancer (CRC) is a diffused disease with limited therapeutic options, none of which are often curative. Based on the molecular markers and targets expressed by the affected tissues, numerous novel approaches have been developed to study and treat this disease. In particular, the field of nanotechnology offers an astonishingly wide array of innovative nanovectors with high versatility and adaptability for both diagnosis and therapy (the so called “theranostic platforms”). However, such complexity can make the selection of a specific nanocarrier model to study a perplexing endeavour for the biomedical scientist or clinician not familiar with this field of inquiry. This review offers a comprehensive overview of this wide body of knowledge, in order to outline the essential requirements for the clinical viability evaluation of a nanovector model in CRC. In particular, the differences among the foremost designs, their specific advantages, and technological caveats will be treated, never forgetting the ultimate endpoint for these systems development: the clinical practice.

Protein-facilitated gold nanoparticle formation as indicators of ionizing radiation

The use of X-ray radiation in radiotherapy is a common treatment for many cancers. Despite several scientific advances, determination of radiation delivered to the patient remains a challenge due to the inherent limitations of existing dosimeters including fabrication and operation. Here, we describe a colorimetric nanosensor that exhibits unique changes in color as a function of therapeutically relevant radiation dose (3-15 Gy). The nanosensor is formulated using a gold salt and maltose-binding protein as a templating agent, which upon exposure to ionizing radiation is converted to gold nanoparticles. The formation of gold nanoparticles from colorless precursor salts renders a change in color that can be observed visually. The dose-dependent multicolored response was quantified through a simple ultraviolet-visible spectrophotometer and the peak shift associated with the different colored dispersions was used as a quantitative indicator of therapeutically relevant radiation doses. The ease of fabrication, visual color changes upon exposure to ionizing radiation, and quantitative read-out demonstrates the potential of protein-facilitated biomineralization approaches to promote the development of next-generation detectors for ionizing radiation.

Reduction of Tetrachloroaurate(III) Ions With Bioligands: Role of the Thiol and Amine Functional Groups on the Structure and Optical Features of Gold Nanohybrid Systems

In this review, the presentation of the synthetic routes of plasmonic gold nanoparticles (Au NPs), fluorescent gold nanoclusters (Au NCs), as well as self-assembled Au-containing thiolated coordination polymers (Au CPs) was highlighted. We exclusively emphasize the gold products that are synthesized by the spontaneous interaction of tetrachloroaurate(III) ions (AuCl4¯) with bioligands using amine and thiolate derivatives, including mainly amino acids. The dominant role of the nature of the applied reducing molecules as well as the experimental conditions (concentration of the precursor metal ion, molar ratio of the AuCl4¯ ions and biomolecules; pH, temperature, etc.) of the syntheses on the size and structure-dependent optical properties of these gold nanohybrid materials have been summarized. While using the same reducing and stabilizing biomolecules, the main differences on the preparation conditions of Au NPs, Au NCs, and Au CPs have been interpreted and the reducing capabilities of various amino acids and thiolates have been compared. Moreover, various fabrication routes of thiol-stabilized plasmonic Au NPs, as well as fluorescent Au NCs and self-assembled Au CPs have been presented via the formation of -(Au(I)-SR)n- periodic structures as intermediates.

Reproductive Toxicity of Pomegranate Peel Extract Synthesized Gold Nanoparticles: A Multigeneration Study in C. elegans

C. elegans is a preferential model for testing environmental toxicity of compounds including nanomaterials. The impact of multigeneration exposure of gold nanoparticles (AuNPs) on the lifespan and fertility of C. elegans is not known and therefore is investigated in this study. We used pomegranate (Punica granatum) peel extracts as a reducing agent to synthesize gold nanoparticles (PPE-AuNPs) from chloroauric acid. Nematodes were grown till adult stage and then exposed to 25, 50, and 100 μg/ml of PPE-AuNPs at 20°C for 72 hours and then assessed for lifespan and fertility. The same protocols were followed for subsequent F1, F2, and F3 generations. The results showed that PPE-AuNPs dose-dependently but insignificantly reduced the lifespan of C. elegans. Exposure of PPE-AuNPs significantly and dose-dependently reduced the fertility of C. elegans in terms of the number of eggs produced. The reproductive toxicity of PPE-AuNPs was found to be minimal in parental generation (F0) and maximal in F3 generation. In conclusion, biologically synthesized PPE-AuNPs adversely affect the fertility of C. elegans while the factors responsible for reproductive toxicity are inherited by subsequent generations.

Gold Nanoparticles and Nanorods in Nuclear Medicine: A Mini Review

In the last decade, many innovative nanodrugs have been developed, as well as many nanoradiocompounds that show amazing features in nuclear imaging and/or radiometabolic therapy. Their potential uses offer a wide range of possibilities. It can be possible to develop nondimensional systems of existing radiopharmaceuticals or build engineered systems that combine a nanoparticle with the radiopharmaceutical, a tracer, and a target molecule, and still develop selective nanodetection systems. This review focuses on recent advances regarding the use of gold nanoparticles and nanorods in nuclear medicine. The up-to-date advancements will be shown concerning preparations with special attention on the dimensions and functionalizations that are most used to attain an enhanced performance of gold engineered nanomaterials. Many ideas are offered regarding recent in vitro and in vivo studies. Finally, the recent clinical trials and applications are discussed.

Study of Green Synthesis of Ultrasmall Gold Nanoparticles Using Citrus Sinensis Peel

Sweet orange (Citrus sinensis) peel, one of the most underutilized biowaste, was in this study employed for the green synthesis of gold nanoparticles (AuNPs) as an alternative source of reductant and stabilizer. Spherical AuNPs with narrow size distribution (1.75 ± 0.86 nm) were obtained by controlling pH and adjusting sequence for the first time. ultraviolet-visible (UV-vis) spectrophotometer, transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), dynamic light scattering (DLS) were applied to detect the characteristic surface plasmon resonance peak, morphological and aggregate characteristic, elementary composition and hydrodynamic diameter, respectively. The major functional groups in extract were tested by Fourier transform infrared(FT-IR) spectrophotometer to characterize the components which are responsible for the reduction and stabilization of AuNPs. The possible role of the components during the process of AuNPs synthesis is also discussed. The result of this study enriched the green source for ultra-small AuNPs synthesis, and will help to understand the mechanism of synthesis and stability of ultra-small AuNPs by fruit peels extract.

γ-Radiation Enhanced Luminescence of Thiol-Capped Quantum Dots in Aqueous Solution

Quantum dots (QDs) have attracted great attention due to their unique optical properties. High fluorescence efficiency is very important for their practical application. In this study, we report a simple and efficient strategy to enhance the photoluminescence of water-dispersed thiol-capped QDs using γ-radiation. Three kinds of QDs with different surface ligands and cores (MPA-CdTe, MPA-CdSe and Cys-CdTe) were fabricated and irradiated by high-energy γ-ray in an aqueous solution. Their photoluminescence intensities were significantly enhanced after irradiation, which were closely related to the radiation dose and the structure of QDs. The positions of the fluorescence emission peaks did not shift obviously after irradiation. The mechanism of photoluminescence enhancement was discussed based on the results of photoluminescence (PL) spectra, UV-visible light absorption (UV-vis) spectra, transmission electron microscope (TEM), X-ray diffraction (XRD) patterns, Fourier transform infrared (FT-IR) spectra and X-ray photoelectron spectroscopy (XPS). This method can be employed to uniformly treat large batches of QDs at room temperature and without other chemicals.