A practical guide to hydrogels for cell culture

In vitro evaluation of barium titanate nanoparticle/alginate 3D scaffold for osteogenic human stem cell differentiation

Nanomaterials can mimic properties of extracellular matrix molecules, promising great potential for scaffold composition in tissue engineering. In the present study, we investigated whether barium titanate nanoparticles (BT NP) combined with alginate polymer would provide a new cytocompatible three-dimensional (3D) scaffold to induce osteogenic stem cell differentiation. In vitro cytocompatibility and osteogenic differentiation potential were investigated using human mesenchymal stem cells (MSC). Firstly, we studied the cell viability and oxidative stress by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) thiazolyl blue tetrazolium bromide (MTT) and superoxide dismutase (SOD) assays. Overall, neither pure BT NP or BT NP/alginate 3D scaffold induced cytotoxicity. The scanning electron and atomic force microscopy revealed that BT NP/alginate 3D scaffold produced exhibited highly interconnected pores and surface nanotopography that were favorable for MSC differentiation. Von Kossa staining showed mineralization nodules and MSCs morphology changed from spindle to cuboid shape after 21 d. Finally, BMP-2 and ALP mRNA were significantly upregulated on cells grown into the BT NP/alginate 3D scaffold. Thus, the BT NP/alginate 3D scaffold showed an osteogenic differentiation induction potential, without the addition of osteogenic supplements. These results indicate that the BT NP/alginate 3D scaffold provides a cytocompatible and bioactive microenvironment for osteogenic human MSC differentiation.

T-Cell Mechanobiology: Force Sensation, Potentiation, and Translation

A T cell is a sensitive self-referential mechanical sensor. Mechanical forces influence the recognition, activation, differentiation, and function throughout the lifetime of a T cell. T cells constantly perceive and respond to physical stimuli through their surface receptors, cytoskeleton, and subcellular structures. Surface receptors receive physical cues in the form of forces generated through receptor-ligand binding events, which are dynamically regulated by contact tension, shear stress, and substrate rigidity. The resulting mechanotransduction not only influences T-cell recognition and signaling but also possibly modulates cell metabolism and gene expression. Moreover, forces also dynamically regulate the deformation, organization, and translocation of cytoskeleton and subcellular structures, leading to changes in T-cell mobility, migration, and infiltration. However, the roles and mechanisms of how mechanical forces modulate T-cell recognition, signaling, metabolism, and gene expression, are largely unknown and underappreciated. Here, we review recent technological and scientific advances in T-cell mechanobiology, discuss possible roles and mechanisms of T-cell mechanotransduction, and propose new research directions of this emerging field in health and disease.

Oxidized alginate hydrogels with the GHK peptide enhance cord blood mesenchymal stem cell osteogenesis: A paradigm for metabolomics-based evaluation of biomaterial design

Oxidized alginate hydrogels are appealing alternatives to natural alginate due to their favourable biodegradability profiles and capacity to self-crosslink with amine containing molecules facilitating functionalization with extracellular matrix cues, which enable modulation of stem cell fate, achieve highly viable 3-D cultures, and promote cell growth. Stem cell metabolism is at the core of cellular fate (proliferation, differentiation, death) and metabolomics provides global metabolic signatures representative of cellular status, being able to accurately identify the quality of stem cell differentiation. Herein, umbilical cord blood mesenchymal stem cells (UCB MSCs) were encapsulated in novel oxidized alginate hydrogels functionalized with the glycine-histidine-lysine (GHK) peptide and differentiated towards the osteoblastic lineage. The ADA-GHK hydrogels significantly improved osteogenic differentiation compared to gelatin-containing control hydrogels, as demonstrated by gene expression, alkaline phosphatase activity and bone extracellular matrix deposition. Metabolomics revealed the high degree of metabolic heterogeneity in the gelatin-containing control hydrogels, captured the enhanced osteogenic differentiation in the ADA-GHK hydrogels, confirmed the similar metabolism between differentiated cells and primary osteoblasts, and elucidated the metabolic mechanism responsible for the function of GHK. Our results suggest a novel paradigm for metabolomics-guided biomaterial design and robust stem cell bioprocessing. STATEMENT OF SIGNIFICANCE: Producing high quality engineered bone grafts is important for the treatment of critical sized bone defects. Robust and sensitive techniques are required for quality assessment of tissue-engineered constructs, which result to the selection of optimal biomaterials for bone graft development. Herein, we present a new use of metabolomics signatures in guiding the development of novel oxidised alginate-based hydrogels with umbilical cord blood mesenchymal stem cells and the glycine-histidine-lysine peptide, demonstrating that GHK induces stem cell osteogenic differentiation. Metabolomics signatures captured the enhanced osteogenesis in GHK hydrogels, confirmed the metabolic similarity between differentiated cells and primary osteoblasts, and elucidated the metabolic mechanism responsible for the function of GHK. In conclusion, our results suggest a new paradigm of metabolomics-driven design of biomaterials.

A simple layer-stacking technique to generate biomolecular and mechanical gradients in photocrosslinkable hydrogels

Physicochemical and biological gradients are desirable features for hydrogels to enhance their relevance to biological environments for three-dimensional (3D) cell culture. Therefore, simple and efficient techniques to generate chemical, physical and biological gradients within hydrogels are highly desirable. This work demonstrates a technique to generate biomolecular and mechanical gradients in photocrosslinkable hydrogels by stacking and crosslinking prehydrogel solution in a layer by layer manner. Partial crosslinking of the hydrogel allows mixing of prehydrogel solution with the previous hydrogel layer, which makes a smooth gradient profile, rather than discrete layers. This technique enables the generation of concentration gradients of bovine serum albumin in both gelatin methacryloyl (GelMA) and poly(ethylene glycol) diacrylate hydrogels, as well as mechanical gradients across a hydrogel containing varying gel concentrations. Fluorescence microscopy, mechanical testing, and scanning electron microscopy show that the gradient profiles can be controlled by changing both the volume and concentration of each layer as well as intensity of UV exposure. GelMA hydrogel gradients with different Young's moduli were successfully used to culture human fibroblasts. The fibroblasts migrated along the gradient axis and showed different morphologies. In general, the proposed technique provides a rapid and simple approach to design and fabricate 3D hydrogel gradients for in vitro biological studies and potentially for in vivo tissue engineering applications.

Glioblastoma heterogeneity and the tumour microenvironment: implications for preclinical research and development of new treatments

Glioblastoma is the deadliest form of brain cancer. Aside from inadequate treatment options, one of the main reasons glioblastoma is so lethal is the rapid growth of tumour cells coupled with continuous cell invasion into surrounding healthy brain tissue. Significant intra- and inter-tumour heterogeneity associated with differences in the corresponding tumour microenvironments contributes greatly to glioblastoma progression. Within this tumour microenvironment, the extracellular matrix profoundly influences the way cancer cells become invasive, and changes to extracellular (pH and oxygen levels) and metabolic (glucose and lactate) components support glioblastoma growth. Furthermore, studies on clinical samples have revealed that the tumour microenvironment is highly immunosuppressive which contributes to failure in immunotherapy treatments. Although technically possible, many components of the tumour microenvironment have not yet been the focus of glioblastoma therapies, despite growing evidence of its importance to glioblastoma malignancy. Here, we review recent progress in the characterisation of the glioblastoma tumour microenvironment and the sources of tumour heterogeneity in human clinical material. We also discuss the latest advances in technologies for personalised and in vitro preclinical studies using brain organoid models to better model glioblastoma and its interactions with the surrounding healthy brain tissue, which may play an essential role in developing new and more personalised treatments for this aggressive type of cancer.

Neural tissue engineering with structured hydrogels in CNS models and therapies

The development of techniques to create and use multiphase microstructured hydrogels (granular hydrogels or microgels) has enabled the generation of cultures with more biologically relevant architecture and use of structured hydrogels is especially pertinent to the development of new types of central nervous system (CNS) culture models and therapies. We review material choice and the customisation of hydrogel structure, as well as the use of hydrogels in developmental models. Combining the use of structured hydrogel techniques with developmentally relevant tissue culture approaches will enable the generation of more relevant models and treatments to repair damaged CNS tissue architecture.

Combining Stem Cells and Biomaterial Scaffolds for Constructing Tissues and Cell Delivery

Combining stem cells with biomaterial scaffolds serves as a promising strategy for engineering tissues for both in vitro and in vivo applications. This updated review details commonly used biomaterial scaffolds for engineering tissues from stem cells. We first define the different types of stem cells and their relevant properties and commonly used scaffold formulations. Next, we discuss natural and synthetic scaffold materials typically used when engineering tissues, along with their associated advantages and drawbacks and gives examples of target applications. New approaches to engineering tissues, such as 3D bioprinting, are described as they provide exciting opportunities for future work along with current challenges that must be addressed. Thus, this review provides an overview of the available biomaterials for directing stem cell differentiation as a means of producing replacements for diseased or damaged tissues.

Tunable synthetic extracellular matrices to investigate breast cancer response to biophysical and biochemical cues

The extracellular matrix (ECM) is thought to play a critical role in the progression of breast cancer. In this work, we have designed a photopolymerizable, biomimetic synthetic matrix for the controlled, 3D culture of breast cancer cells and, in combination with imaging and bioinformatics tools, utilized this system to investigate the breast cancer cell response to different matrix cues. Specifically, hydrogel-based matrices of different densities and modified with receptor-binding peptides derived from ECM proteins [fibronectin/vitronectin (RGDS), collagen (GFOGER), and laminin (IKVAV)] were synthesized to mimic key aspects of the ECM of different soft tissue sites. To assess the breast cancer cell response, the morphology and growth of breast cancer cells (MDA-MB-231 and T47D) were monitored in three dimensions over time, and differences in their transcriptome were assayed using next generation sequencing. We observed increased growth in response to GFOGER and RGDS, whether individually or in combination with IKVAV, where binding of integrin β1 was key. Importantly, in matrices with GFOGER, increased growth was observed with increasing matrix density for MDA-MB-231s. Further, transcriptomic analyses revealed increased gene expression and enrichment of biological processes associated with cell-matrix interactions, proliferation, and motility in matrices rich in GFOGER relative to IKVAV. In sum, a new approach for investigating breast cancer cell-matrix interactions was established with insights into how microenvironments rich in collagen promote breast cancer growth, a hallmark of disease progression in vivo, with opportunities for future investigations that harness the multidimensional property control afforded by this photopolymerizable system.

Bacteria-laden microgels as autonomous three-dimensional environments for stem cell engineering

A one-step microfluidic system is developed in this study which enables the encapsulation of stem cells and genetically engineered non-pathogenic bacteria into a so-called three-dimensional (3D) pearl lace-like microgel of alginate with high level of monodispersity and cell viability. The alginate-based microgel constitutes living materials that control stem cell differentiation in either an autonomous or heteronomous manner. The bacteria (Lactococcus lactis) encapsulated within the construct surface display adhesion fragments (III7-10 fragment of human fibronectin) for integrin binding while secreting growth factors (recombinant human bone morphogenetic protein-2) to induce osteogenic differentiation of human bone marrow-derived mesenchymal stem cells. We concentrate on interlinked pearl lace microgels that enabled us to prototype a low-cost 3D bioprinting platform with highly tunable properties.

Matrix Remodeling Enhances the Differentiation Capacity of Neural Progenitor Cells in 3D Hydrogels

Neural progenitor cells (NPCs) are a promising cell source to repair damaged nervous tissue. However, expansion of therapeutically relevant numbers of NPCs and their efficient differentiation into desired mature cell types remains a challenge. Material-based strategies, including culture within 3D hydrogels, have the potential to overcome these current limitations. An ideal material would enable both NPC expansion and subsequent differentiation within a single platform. It has recently been demonstrated that cell-mediated remodeling of 3D hydrogels is necessary to maintain the stem cell phenotype of NPCs during expansion, but the role of matrix remodeling on NPC differentiation and maturation remains unknown. By culturing NPCs within engineered protein hydrogels susceptible to degradation by NPC-secreted proteases, it is identified that a critical amount of remodeling is necessary to enable NPC differentiation, even in highly degradable gels. Chemical induction of differentiation after sufficient remodeling time results in differentiation into astrocytes and neurotransmitter-responsive neurons. Matrix remodeling modulates expression of the transcriptional co-activator Yes-associated protein, which drives expression of NPC stemness factors and maintains NPC differentiation capacity, in a cadherin-dependent manner. Thus, cell-remodelable hydrogels are an attractive platform to enable expansion of NPCs followed by differentiation of the cells into mature phenotypes for therapeutic use.

Indoor nanoscale particulate matter-induced coagulation abnormality based on a human 3D microvascular model on a microfluidic chip

BACKGROUND

A growing body of evidence shows that indoor concentrations of airborne particles are often higher than is typically encountered outdoors. Since exposure to indoor PM2.5 is thought to be associated with cardiovascular disease, the health impacts of indoor air pollution need to be explored. Based on animal models, ambient particulate matter has been proved to promote coagulation which is very likely involved in the pathogenic development of cardiovascular disease. However, animal models are insufficient to predict what will happen with any certainty in humans. For this reason, the precise pathogenic mechanisms behind the development of cardiovascular disease in humans have not yet been determined.

RESULTS

We generated a 3D functional human microvascular network in a microfluidic device. This model enables human vascular endothelial cells to form tissue-like microvessels that behave very similarly to human blood vessels. The perfusable microvasculature allows the delivery of particles introduced into these generated human-like microvessels to follow the fluid flow. This exposure path effectively simulates the dynamic movement of airborne nanoscale particles (ANPs) within human vessels. In this study, we first identified the existence of ANPs in indoor air pollution. We then showed that ANPs could activate endothelial cells via ROS induced inflammation, and further resulted in abnormal expression of the coagulation factors (TF, TM and t-PA) involved in coagulation cascades. In addition, we found that a protein could cover ANPs, and this biointeraction could interfere with heparan sulfate (HS). Human organotypic 3D microvessel models provide a bridge for how research outcomes can translate to humans.

CONCLUSIONS

The 3D human microvessel model was used to determine the physiological responses of human vessels to ANP stimulation. Based on the obtained data, we concluded that ANPs not only disrupts normal coagulation functions, but also act directly on anticoagulant factors in human vessels. These experimental observations provide a potential biological explanation for the epidemiologically established link between ANPs and coagulation abnormality. This organ-on-chip model may provide a bridge from in vitro results to human responses.

Rationally Designed 3D Hydrogels Model Invasive Lung Diseases Enabling High-Content Drug Screening

Cell behavior is highly dependent upon microenvironment. Thus, to identify drugs targeting metastatic cancer, screens need to be performed in tissue mimetic substrates that allow cell invasion and matrix remodeling. A novel biomimetic 3D hydrogel platform that enables quantitative analysis of cell invasion and viability at the individual cell level is developed using automated data acquisition methods with an invasive lung disease (lymphangioleiomyomatosis, LAM) characterized by hyperactive mammalian target of rapamycin complex 1 (mTORC1) signaling as a model. To test the lung-mimetic hydrogel platform, a kinase inhibitor screen is performed using tuberous sclerosis complex 2 (TSC2) hypomorphic cells, identifying Cdk2 inhibition as a putative LAM therapeutic. The 3D hydrogels mimic the native niche, enable multiple modes of invasion, and delineate phenotypic differences between healthy and diseased cells, all of which are critical to effective drug screens of highly invasive diseases including lung cancer.

Synthetic Extracellular Matrices with Nonlinear Elasticity Regulate Cellular Organization

One of the promises of synthetic materials in cell culturing is that control over their molecular structures may ultimately be used to control their biological processes. Synthetic polymer hydrogels from polyisocyanides (PIC) are a new class of minimal synthetic biomaterials for three-dimensional cell culturing. The macromolecular lengths and densities of biofunctional groups that decorate the polymer can be readily manipulated while preserving the intrinsic nonlinear mechanics, a feature commonly displayed by fibrous biological networks. In this work, we propose the use of PIC gels as cell culture platforms with decoupled mechanical inputs and biological cues. For this purpose, different types of cells were encapsulated in PIC gels of tailored compositions that systematically vary in adhesive peptide (GRGDS) density, polymer length, and concentration; with the last two parameters controlling the gel mechanics. Both cancer and smooth muscle cells grew into multicellular spheroids with proliferation rates that depend on the adhesive GRGDS density, regardless of the polymer length, suggesting that for these cells, the biological input prevails over the mechanical cues. In contrast, human adipose-derived stem cells do not form spheroids but rather spread out. We find that the morphological changes strongly depend on the adhesive ligand density and the network mechanics; gels with the highest GRGDS densities and the strongest stiffening response to stress show the strongest spreading. Our results highlight the role of the nonlinear mechanics of the extracellular matrix and its synthetic mimics in the regulation of cell functions.

Jammed Microgel Inks for 3D Printing Applications

3D printing involves the development of inks that exhibit the requisite properties for both printing and the intended application. In bioprinting, these inks are often hydrogels with controlled rheological properties that can be stabilized after deposition. Here, an alternate approach is developed where the ink is composed exclusively of jammed microgels, which are designed to incorporate a range of properties through microgel design (e.g., composition, size) and through the mixing of microgels. The jammed microgel inks are shear-thinning to permit flow and rapidly recover upon deposition, including on surfaces or when deposited in 3D within hydrogel supports, and can be further stabilized with secondary cross-linking. This platform allows the use of microgels engineered from various materials (e.g., thiol-ene cross-linked hyaluronic acid (HA), photo-cross-linked poly(ethylene glycol), thermo-sensitive agarose) and that incorporate cells, where the jamming process and printing do not decrease cell viability. The versatility of this particle-based approach opens up numerous potential biomedical applications through the printing of a more diverse set of inks.

Three-Dimensional Stable Alginate-Nanocellulose Gels for Biomedical Applications: Towards Tunable Mechanical Properties and Cell Growing

Hydrogels have been studied as promising materials in different biomedical applications such as cell culture in tissue engineering or in wound healing. In this work, we synthesized different nanocellulose-alginate hydrogels containing cellulose nanocrystals, TEMPO-oxidized cellulose nanocrystals (CNCTs), cellulose nanofibers or TEMPO-oxidized cellulose nanofibers (CNFTs). The hydrogels were freeze-dried and named as gels. The nanocelluloses and the gels were characterized by different techniques such as Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and dynamic mechanical thermal analysis (DMTA), while the biological features were characterized by cytotoxicity and cell growth assays. The addition of CNCTs or CNFTs in alginate gels contributed to the formation of porous structure (diameter of pores in the range between 40 and 150 μm). TEMPO-oxidized cellulose nanofibers have proven to play a crucial role in improving the dimensional stability of the samples when compared to the pure alginate gels, mainly after a thermal post-treatment of these gels containing 50 wt % of CNFT, which significantly increased the Ca2+ crosslinking density in the gel structure. The morphological characteristics, the mechanical properties, and the non-cytotoxic behavior of the CNFT-alginate gels improved bioadhesion, growth, and proliferation of the cells onto the gels. Thus, the alginate-nanocellulose gels might find applications in tissue engineering field, as for instance, in tissue repair or wound healing applications.

A quantitative comparable study on multi-hierarchy conformation of acid and pepsin-solubilized collagens from the skin of grass carp (Ctenopharyngodon idella)

This work aimed to improve yield of collagen from the grass carp skin by employing different strategies (acid-acid method, pepsin-pepsin method and acid-pepsin method, denoted as A-A, P-P, A-P, respectively). And further to conduct quantitative characterization on structural properties, self-assembly kinetics and gelation properties of these collagens. Herein, a two-step collagen extraction method (pepsin-pepsin) was established with the high yield. Meanwhile, structural measurements of high-yield collagen (pepsin-soluble collagen, PSC) and acid-soluble collagen (ASC) indicated that both collagens maintained the typical triple helical conformation of collagen type I. Moreover, the fibrillogenesis tests of PSC and ASC at the various temperatures confirmed that self-assembly were the entropy-driven process. The gelation time of both ASC and PSC was determined by the dynamic time sweep at the different frequencies combined with Winter's criterion. The self-assembly kinetics results showed that fibrillogenesis rate for ASC solution was faster, and more liable to gelation relative to PSC. Mechanical measurements suggested that ASC showed the more resistance ability to deformation than PSC due to more complicated architecture, confirmed by higher fractal dimension. However, the equivalent typical assemblies of PSC to ASC at the various stages can still be expected via controlling incubation time or temperature under the guidance of Arrhenius equation. This study would provide some strategies for achieving maximum utilization of waste biomass and significant insights into the mechanisms underlying the quantitative differences in multiple hierarchy conformation (molecule, fibrillogenesis and hydrogel) of ASC and PSC, which may benefit for subsequent design, development and optimization of collagen-based hydrogels in biomedical industries.

Tailoring supramolecular guest-host hydrogel viscoelasticity with covalent fibrinogen double networks

Supramolecular chemistry has enabled the design of tunable biomaterials that mimic the dynamic and viscoelastic characteristics of the extracellular matrix. However, the noncovalent nature of supramolecular bonds renders them inherently weak, limiting their applicability to many biomedical applications. To address this, we formulated double network (DN) hydrogels through a combination of supramolecular and covalent networks to tailor hydrogel viscoelastic properties. Specifically, DN hydrogels were formed through the combination of supramolecular guest-host (GH) hyaluronic acid (HA) networks with covalent networks from the photocrosslinking of acrylated poly(ethylene glycol) modified fibrinogen (PEG-fibrinogen) and PEG diacrylate. DN hydrogels exhibited higher compressive moduli, increased failure stresses, and increased toughness when compared to purely covalent networks. While GH concentration had little influence on the compressive moduli across DN hydrogels, an increase in the GH concentration resulted in more viscous behavior of DN hydrogels. High viability of encapsulated bovine mesenchymal stromal cells (MSCs) was observed across groups with enhanced spreading and proliferation in DN hydrogels with increased GH concentration. This combination of supramolecular and covalent chemistries enables the formation of dynamic hydrogels with tunable properties that can be customized towards repair of viscoelastic tissues.

Highly sensitive detection of antibodies in a soft bioactive three-dimensional bioorthogonal hydrogel

This three-dimensional detection method of antibodies offers a high sensitivity and good biomolecule stability for new biosensing devices.

Self-Healing Supramolecular Hydrogels for Tissue Engineering Applications

Self-healing supramolecular hydrogels have emerged as a novel class of biomaterials that combine hydrogels with supramolecular chemistry to develop highly functional biomaterials with advantages including native tissue mimicry, biocompatibility, and injectability. These properties are endowed by the reversibly cross-linked polymer network of the hydrogel. These hydrogels have great potential for realizing yet to be clinically translated tissue engineering therapies. This review presents methods of self-healing supramolecular hydrogel formation and their uses in tissue engineering as well as future perspectives.

Stable gold graphitic nanocapsule doped hydrogels for efficient photothermal antibacterial applications

We have fabricated gold nanorod graphitic nanocapsule (AuNR@G) doped poly(vinyl alcohol) (PVA)/chitosan (CS) hydrogels, which possessed highly efficient and stable photothermal antibacterial properties under the irradiation of a near-infrared laser.

Mechanically robust photodegradable gelatin hydrogels for 3D cell culture and in situ mechanical modification

Highly conjugated, hydrophobically modified gelatin hydrogels were synthesized, polymerized and degraded with orthogonal wavelengths of light.

Recent advances in the design of injectable hydrogels for stem cell-based therapy

The recent advances in the design of injectable hydrogels for stem cell delivery, especially for in vivo applications, are overviewed in this review.

Development of improved dual-diazonium reagents for faster crosslinking of tobacco mosaic virus to form hydrogels

New bench-stable reagents with two diazonium sites were designed and synthesized for protein crosslinking. Because of the faster diazonium-tyrosine coupling reaction, hydrogels from the crosslinking of tobacco mosaic virus and the reagent DDA-3 could be prepared within 1 min at room temperature. Furthermore, hydrogels with the introduction of disulfide bonds viaDDA-4 could be chemically degraded by dithiothreitol. Our results provided a facile approach for the direct construction of virus-based hydrogels.

Improved dual-diazonium reagents were developed for more efficient crosslinking of tobacco mosaic virus to form hydrogels.

A multi-site metastasis-on-a-chip microphysiological system for assessing metastatic preference of cancer cells

Metastatic disease remains one of the primary reasons for cancer-related deaths, yet the majority of in vitro cancer models focus on the primary tumor sites. Here, we describe a metastasis-on-a-chip device that houses multiple bioengineered three-dimensional (3D) organoids, established by a 3D photopatterning technique employing extracellular matrix-derived hydrogel biomaterials. Specifically, cancer cells begin in colorectal cancer (CRC) organoid, which resides in a single microfluidic chamber connected to multiple downstream chambers in which liver, lung, and endothelial constructs are housed. Under recirculating fluid flow, tumor cells grow in the primary site, eventually enter circulation, and can be tracked via fluorescent imaging. Importantly, we describe that in the current version of this platform, HCT116 CRC cells preferentially home to the liver and lung constructs; the corresponding organs of which CRC metastases arise the most in human patients. We believe that in subsequent studies this platform can be implemented to better understand the mechanisms underlying metastasis, perhaps resulting in the identification of targets for intervention.

Paper-based Transwell assays: an inexpensive alternative to study cellular invasion

Cellular movement is essential in the formation and maintenance of healthy tissues as well as in disease progression such as tumor metastasis. In this work, we describe a paper-based Transwell assay capable of quantifying cellular invasion through an extracellular matrix. The paper-based Transwell assays generate similar datasets, with equivalent reproducibility, to commercially available Transwell assays. With different culture configurations, we quantify invasion: upon addition of an exogenous factor or in the presence of medium obtained from other cell types, in an indirect or direct co-culture format whose medium composition is dynamically changing, and in a single-zone or parallel (96-zone) format.

Anions reversibly responsive luminescent nanocellulose hydrogels for cancer spheroids culture and release

Artificial stimuli-responsive hydrogels that can mimic natural extracellular matrix for growth and release of cancer spheroids (CSs) have attracted much attention. However, such hydrogels still face a challenge in regulating CSs growth and controlled release as well as keeping CSs integrity. Herein, a new class of ClO^-/SCN^- reversibly responsive nanocellulose hydrogel with fluorescence on-off reporter is developed. Upon addition of ClO^-, the gel network of nanocellulose hydrogel was destructed, accompanying by the fluorescent quenching. Notably, when introducing of SCN^-, a red fluorescence filamentous hydrogel was recovered by coordination cross-linking. The hydrogel reforms in a completely reversible process through the regulation of ClO^-/SCN^-. Benefit from the above response features of the hydrogel, the growth of cancer spheroids (CSs) in the hydrogel and on demand release of CSs from the hydrogel could be easily achieved through ClO^-/SCN^- regulation. Importantly, the growth and release of CSs can be monitored in real time by fluorescence imaging. Overall, such design strategy based on ClO^-/SCN^--responsive fluorescent hydrogels provided a new type of multi-responsive hydrogels as main scaffolds for cancer research and cancer drug screening.

Spatio-Temporal Control of Cell Adhesion: Toward Programmable Platforms to Manipulate Cell Functions and Fate

Biophysical and biochemical signals of material surfaces potently regulate cell functions and fate. In particular, micro- and nano-scale patterns of adhesion signals can finely elicit and affect a plethora of signaling pathways ultimately affecting gene expression, in a process known as mechanotransduction. Our fundamental understanding of cell-material signals interaction and reaction is based on static culturing platforms, i.e., substrates exhibiting signals whose configuration is time-invariant. However, cells in-vivo are exposed to arrays of biophysical and biochemical signals that change in time and space and the way cells integrate these might eventually dictate their behavior. Advancements in fabrication technologies and materials engineering, have recently enabled the development of culturing platforms able to display patterns of biochemical and biophysical signals whose features change in time and space in response to external stimuli and according to selected programmes. These dynamic devices proved to be particularly helpful in shedding light on how cells adapt to a dynamic microenvironment or integrate spatio-temporal variations of signals. In this work, we present the most relevant findings in the context of dynamic platforms for controlling cell functions and fate in vitro. We place emphasis on the technological aspects concerning the fabrication of platforms displaying micro- and nano-scale dynamic signals and on the physical-chemical stimuli necessary to actuate the spatio-temporal changes of the signal patterns. In particular, we illustrate strategies to encode material surfaces with dynamic ligands and patterns thereof, topographic relieves and mechanical properties. Additionally, we present the most effective, yet cytocompatible methods to actuate the spatio-temporal changes of the signals. We focus on cell reaction and response to dynamic changes of signal presentation. Finally, potential applications of this new generation of culturing systems for in vitro and in vivo applications, including regenerative medicine and cell conditioning are presented.

The Application of Biomaterials to Tissue Engineering Neural Retina and Retinal Pigment Epithelium

The prevalence of degenerative retinal disease is ever increasing as life expectancy rises globally. The human retina fails to regenerate and the use of human embryonic stem cells (hESCs) and human-induced pluripotent stem cells (hiPSCs) to engineer retinal tissue is of particular interest due to the limited availability of suitable allogeneic or autologous tissue. Retinal tissue and its development are well characterized, which have resulted in robust assays to assess the development of tissue-engineered retina. Retinal tissue can be generated in vitro from hESCs and hiPSCs without biomaterial scaffolds, but despite advancements, protocols remain slow, expensive, and fail to result in mature functional tissue. Several recent studies have demonstrated the potential of biomaterial scaffolds to enhance generation of hESC/hiPSC-derived retinal tissue, including synthetic polymers, silk, alginate, hyaluronic acid, and extracellular matrix molecules. This review outlines the advances that have been made toward tissue-engineered neural retina and retinal pigment epithelium (RPE) for clinical application in recent years, including the success of clinical trials involving transplantation of cells and tissue to promote retinal repair; and the evidence from in vitro and animal studies that biomaterials can enhance development and integration of retinal tissue.

Photopolymerizable Platelet Lysate Hydrogels for Customizable 3D Cell Culture Platforms

3D cell culture platforms have emerged as a setting that resembles in vivo environments replacing the traditional 2D platforms. Over the recent years, an extensive effort has been made on the development of more physiologically relevant 3D cell culture platforms. Extracellular matrix-based materials have been reported as a bioactive and biocompatible support for cell culture. For example, human plasma derivatives have been extensively used in cell culture. Despite all the promising results, in most cases these types of materials have poor mechanical properties and poor stability in vitro. Here plasma-based hydrogels with increased stability are proposed. Platelet lysates are modified by addition of methacryloyl groups (PLMA) that polymerize in controlled geometries upon UV light exposure. The hydrogels could also generate porous scaffolds after lyophilization. The results show that PLMA materials have increased mechanical properties that can be easily adjusted by changing PLMA concentration or modification degree. Cells readily adhere, proliferate, and migrate, exhibiting high viability when encapsulated in PLMA hydrogels. The innovation potential of PLMA materials is based on the fact that it is a complete xeno-free solution for human cell culture, thus an effective alternative to the current gold standards for 3D cell culture based on animal products.

Optofluidic Modular Blocks for On-Demand and Open-Source Prototyping of Microfluidic Systems

Rapid prototyping of microfluidic devices has advanced greatly, along with the development of 3D printing and micromachining technologies. However, peripheral systems for microfluidics still rely on conventional equipment, such as bench-top microscopy and syringe pumps, which limit system modification and further improvements. Herein, optofluidic modular blocks are presented as discrete elements to modularize peripheral optical and fluidic systems and are used for on-demand and open-source prototyping of whole microfluidic systems. Each modular block is fabricated by embedding optical or fluidic devices into the corresponding 3D-printed housing. The self-interlocking structure of the modular blocks enables easy assembly and reconfiguration of the blocks in an intuitive manner, while also providing precise optical and fluidic alignment between the blocks. With the library of standardized modular blocks developed here, how the blocks can be easily assembled to build whole microfluidic systems for blood compatibility testing, droplet microfluidics, and cell migration assays is demonstrated. Based on the simplicity of assembling the optofluidic blocks, the prototyping platform can be easily used for open-source sharing of digital design files, assembly and operation instructions, and block specifications, thereby making it easy for nonexperts to implement microfluidic ideas as physical systems.

Injectable Biomimetic Hydrogels as Tools for Efficient T Cell Expansion and Delivery

Biomaterial-based scaffolds are promising tools for controlled immunomodulation. They can be applied as three dimensional (3D) culture systems in vitro, whereas in vivo they may be used to dictate cellular localization and exert spatiotemporal control over cues presented to the immune system. As such, scaffolds can be exploited to enhance the efficacy of cancer immunotherapies such as adoptive T cell transfer, in which localization and persistence of tumor-specific T cells dictates treatment outcome. Biomimetic polyisocyanopeptide (PIC) hydrogels are polymeric scaffolds with beneficial characteristics as they display reversible thermally-induced gelation at temperatures above 16°C, which allows for their minimally invasive delivery via injection. Moreover, incorporation of azide-terminated monomers introduces functional handles that can be exploited to include immune cell-modulating cues. Here, we explore the potential of synthetic PIC hydrogels to promote the in vitro expansion and in vivo local delivery of pre-activated T cells. We found that PIC hydrogels support the survival and vigorous expansion of pre-stimulated T cells in vitro even at high cell densities, highlighting their potential as 3D culture systems for efficient expansion of T cells for their adoptive transfer. In particular, the reversible thermo-sensitive behavior of the PIC scaffolds favors straightforward recovery of cells. PIC hydrogels that were injected subcutaneously gelated instantly in vivo, after which a confined 3D structure was formed that remained localized for at least 4 weeks. Importantly, we noticed no signs of inflammation, indicating that PIC hydrogels are non-immunogenic. Cells co-delivered with PIC polymers were encapsulated within the scaffold in vivo. Cells egressed gradually from the PIC gel and migrated into distant organs. This confirms that PIC hydrogels can be used to locally deliver cells within a supportive environment. These results demonstrate that PIC hydrogels are highly promising for both the in vitro expansion and in vivo delivery of pre-activated T cells. Covalent attachment of biomolecules onto azide-functionalized PIC polymers provides the opportunity to steer the phenotype, survival or functional response of the adoptively transferred cells. As such, PIC hydrogels can be used as valuable tools to improve current adoptive T cell therapy strategies.

Ultrasonic Based Tissue Modelling and Engineering

Systems and devices for in vitro tissue modelling and engineering are valuable tools, which combine the strength between the controlled laboratory environment and the complex tissue organization and environment in vivo. Device-based tissue engineering is also a possible avenue for future explant culture in regenerative medicine. The most fundamental requirements on platforms intended for tissue modelling and engineering are their ability to shape and maintain cell aggregates over long-term culture. An emerging technology for tissue shaping and culture is ultrasonic standing wave (USW) particle manipulation, which offers label-free and gentle positioning and aggregation of cells. The pressure nodes defined by the USW, where cells are trapped in most cases, are stable over time and can be both static and dynamic depending on actuation schemes. In this review article, we highlight the potential of USW cell manipulation as a tool for tissue modelling and engineering.

Exploitation of Cationic Silica Nanoparticles for Bioprinting of Large-Scale Constructs with High Printing Fidelity

Three-dimensional (3D) bioprinting allows the fabrication of 3D structures containing living cells whose 3D shape and architecture are matched to a patient. The feature is desirable to achieve personalized treatment of trauma or diseases. However, realization of this promising technique in the clinic is greatly hindered by inferior mechanical properties of most biocompatible bioink materials. Here, we report a novel strategy to achieve printing large constructs with high printing quality and fidelity using an extrusion-based printer. We incorporate cationic nanoparticles in an anionic polymer mixture, which significantly improves mechanical properties, printability, and printing fidelity of the polymeric bioink due to electrostatic interactions between the nanoparticles and polymers. Addition of cationic-modified silica nanoparticles to an anionic polymer mixture composed of alginate and gellan gum results in significantly increased zero-shear viscosity (1062%) as well as storage modulus (486%). As a result, it is possible to print a large (centimeter-scale) porous structure with high printing quality, whereas the use of the polymeric ink without the nanoparticles leads to collapse of the printed structure during printing. We demonstrate such a mechanical enhancement is achieved by adding nanoparticles within a certain size range (<100 nm) and depends on concentration and surface chemistry of the nanoparticles as well as the length of polymers. Furthermore, shrinkage and swelling of the printed constructs during cross-linking are significantly suppressed by addition of nanoparticles compared with the ink without nanoparticles, which leads to high printing fidelity after cross-linking. The incorporated nanoparticles do not compromise biocompatibility of the polymeric ink, where high cell viability (>90%) and extracellular matrix secretion are observed for cells printed with nanocomposite inks. The design principle demonstrated can be applied for various anionic polymer-based systems, which could lead to achievement of 3D bioprinting-based personalized treatment.

Auditory disorders and future therapies with delivery systems

Auditory function takes a major part in human life. While sensorineural hearing loss is related with many factors including genetic disorders, age and noise, the clear causes are not well understood. Even more, the currently available treatments with drugs cause side effects, which thus are considered suboptimal. Here, we communicate the delivery systems with biomaterials that can be possible therapeutic options to restore hearing and vestibular functions. We introduce briefly the various pathological factors related with hearing loss and the limitation of current therapies, detail the recent studies on delivery systems including nanoparticles and hydrogels and discuss future clinical availability.

Hydrogels with an embossed surface: An all-in-one platform for mass production and culture of human adipose-derived stem cell spheroids

Stem cell spheroids have been studied extensively in organoid culture and therapeutic transplantation. Herein, hydrogels with an embossed surface (HES) were developed as an all-in-one platform that can enable the rapid formation and culture of a large quantity of size-controllable stem cell spheroids. The embossed structure on the hydrogel was adjustable according to the grit designation of the sandpaper. Human adipose-derived stem cells (hADSCs) were rapidly assembled into spheroids on the hydrogel, with their size distribution precisely controlled from 95 ± 6 μm to 181 ± 15 μm depending on surface roughness. The hADSC spheroids prepared from the HES demonstrated expression of stemness markers and differentiation capacity. In addition, HES-based spheroids showed significantly greater VEGF secretion than spheroids grown on a commercially available low-attachment culture plate. Exploiting those advantages, the HES-based spheroids were used for 3D bioprinting, and the spheroids within the 3D-printed construct showed improved retention and VEGF secretion compared to the same 3D structure containing single cell suspension. Collectively, HES would offer a useful platform for mass fabrication and culture of stem cell spheroids with controlled sizes for a variety of biomedical applications.

3D Bone Biomimetic Scaffolds for Basic and Translational Studies with Mesenchymal Stem Cells

Mesenchymal stem cells (MSCs) are recognized as an attractive tool owing to their self-renewal and differentiation capacity, and their ability to secrete bioactive molecules and to regulate the behavior of neighboring cells within different tissues. Accumulating evidence demonstrates that cells prefer three-dimensional (3D) to 2D culture conditions, at least because the former are closer to their natural environment. Thus, for in vitro studies and in vivo utilization, great effort is being dedicated to the optimization of MSC 3D culture systems in view of achieving the intended performance. This implies understanding cell–biomaterial interactions and manipulating the physicochemical characteristics of biomimetic scaffolds to elicit a specific cell behavior. In the bone field, biomimetic scaffolds can be used as 3D structures, where MSCs can be seeded, expanded, and then implanted in vivo for bone repair or bioactive molecules release. Actually, the union of MSCs and biomaterial has been greatly improving the field of tissue regeneration. Here, we will provide some examples of recent advances in basic as well as translational research about MSC-seeded scaffold systems. Overall, the proliferation of tools for a range of applications witnesses a fruitful collaboration among different branches of the scientific community.

Impact of substrate stiffness on dermal papilla aggregates in microgels

Interaction between cells and the extracellular environment plays a vital role in cellular development. The mechanical property of a 3-dimensional (3D) culture can be modified to mimic in vivo conditions. Dermal papilla (DP) cells are shown to gradually lose their inductivity in hair cycle development in a 2-dimensional culture. They are shown to partially restore their inductivity when transferred into a 3D microenvironment. In this study, a microarray fabricated from three different concentrations of poly-ethylene-glycol-diacrylate 3500, namely 5%, 10% and 15% w/v, yielded increasing substrate stiffness. The impact of varying substrate stiffness was tested for DP cell viability, attachment, and selected hair inductive markers. DP aggregates were shown to be viable and exhibited greater spreading with increasing substrate stiffness. Moreover, DP aggregates cultured on a softer substrate showed a greater fold change of gene and protein expressions than those cultured on a harder substrate.

Self-induced mechanical stress can trigger biofilm formation in uropathogenic Escherichia coli

Bacterial biofilms represent an important medical problem; however, the mechanisms of the onset of biofilm formation are poorly understood. Here, using new controlled methods allowing high-throughput and reproducible biofilm growth, we show that biofilm formation is linked to self-imposed mechanical stress. In growing uropathogenic Escherichia coli colonies, we report that mechanical stress can initially emerge from the physical stress accompanying colony confinement within micro-cavities or hydrogel environments reminiscent of the cytosol of host cells. Biofilm formation can then be enhanced by a nutrient access-modulated feedback loop, in which biofilm matrix deposition can be particularly high in areas of increased mechanical and biological stress, with the deposited matrix further enhancing the stress levels. This feedback regulation can lead to adaptive and diverse biofilm formation guided by the environmental stresses. Our results suggest previously unappreciated mechanisms of the onset and progression of biofilm growth.

Bacterial biofilms are an increasingly important medical problem but the mechanisms by which they develop remain largely unknown. Here, using a high-throughput approach, the authors show that biofilm formation is linked to self-imposed mechanical stress.

Engineering cardiac microphysiological systems to model pathological extracellular matrix remodeling

Many cardiovascular diseases are associated with pathological remodeling of the extracellular matrix (ECM) in the myocardium. ECM remodeling is a complex, multifactorial process that often contributes to declines in myocardial function and progression toward heart failure. However, the direct effects of the many forms of ECM remodeling on myocardial cell and tissue function remain elusive, in part because conventional model systems used to investigate these relationships lack robust experimental control over the ECM. To address these shortcomings, microphysiological systems are now being developed and implemented to establish direct relationships between distinct features in the ECM and myocardial function with unprecedented control and resolution in vitro. In this review, we will first highlight the most prominent characteristics of ECM remodeling in cardiovascular disease and describe how these features can be mimicked with synthetic and natural biomaterials that offer independent control over multiple ECM-related parameters, such as rigidity and composition. We will then detail innovative microfabrication techniques that enable precise regulation of cellular architecture in two and three dimensions. We will also describe new approaches for quantifying multiple aspects of myocardial function in vitro, such as contractility, action potential propagation, and metabolism. Together, these collective technologies implemented as cardiac microphysiological systems will continue to uncover important relationships between pathological ECM remodeling and myocardial cell and tissue function, leading to new fundamental insights into cardiovascular disease, improved human disease models, and novel therapeutic approaches.

Cancer cells' ability to mechanically adjust to extracellular matrix stiffness correlates with their invasive potential

Increased tissue stiffness is a classic characteristic of solid tumors. One of the major contributing factors is increased density of collagen fibers in the extracellular matrix (ECM). Here, we investigate how cancer cells biomechanically interact with and respond to the stiffness of the ECM. Probing the adaptability of cancer cells to altered ECM stiffness using optical tweezers-based microrheology and deformability cytometry, we find that only malignant cancer cells have the ability to adjust to collagen matrices of different densities. Employing microrheology on the biologically relevant spheroid invasion assay, we can furthermore demonstrate that, even within a cluster of cells of similar origin, there are differences in the intracellular biomechanical properties dependent on the cells' invasive behavior. We reveal a consistent increase of viscosity in cancer cells leading the invasion into the collagen matrices in comparison with cancer cells following in the stalk or remaining in the center of the spheroid. We hypothesize that this differential viscoelasticity might facilitate spheroid tip invasion through a dense matrix. These findings highlight the importance of the biomechanical interplay between cells and their microenvironment for tumor progression.

Polypeptide Thermogels as Three-Dimensional Scaffolds for Cells

BACKGROUND

Thermogel is an aqueous solution that exhibits a sol-to-gel transition as the temperature increases. Stem cells, growth factors, and differentiating factors can be incorporated in situ in the matrix during the sol-to-gel transition, leading to the formation of a three-dimensional (3D) cell-culture scaffold.

METHODS

The uses of thermogelling polypeptides, such as collagen, Matrigel™, elastin-like polypeptides, and synthetic polypeptides, as 3D scaffolds of cells, are summarized in this paper.

RESULTS

The timely supply of growth factors to the cells, cell survival, and metabolite removal is to be insured in the cell culture matrix. Various growth factors were incorporated in the matrix during the sol-to-gel transition of the thermogelling polypeptide aqueous solutions, and preferential differentiation of the incorporated stem cells into specific target cells were investigated. In addition, modulus of the matrix was controlled by post-crosslinking reactions of thermogels or employing composite systems. Chemical functional groups as well as biological factors were selected appropriately for targeted differentiation of the incorporated stem cells.

CONCLUSION

In addition to all the advantages of thermogels including mild conditions for cell-incorporation and controlled supplies of the growth factors, polypeptide thermogels provide neutral pH environments to the cells during the degradation of the gel. Polypeptide thermogels as an injectable scaffold can be a promising system for their eventual in vivo applications in stem cell therapy.

Visualising the dynamics of live pancreatic microtumours self-organised through cell-in-cell invasion

Pancreatic ductal adenocarcinoma (PDAC) reportedly progresses very rapidly through the initial carcinogenesis stages including DNA damage and disordered cell death. However, such oncogenic mechanisms are largely studied through observational diagnostic methods, partly because of a lack of live in vitro tumour imaging techniques. Here we demonstrate a simple live-tumour in vitro imaging technique using micro-patterned plates (micro/nanoplates) that allows dynamic visualisation of PDAC microtumours. When PDAC cells were cultured on a micro/nanoplate overnight, the cells self-organised into non-spheroidal microtumours that were anchored to the micro/nanoplate through cell-in-cell invasion. This self-organisation was only efficiently induced in small-diameter rough microislands. Using a time-lapse imaging system, we found that PDAC microtumours actively stretched to catch dead cell debris via filo/lamellipoedia and suction, suggesting that they have a sophisticated survival strategy (analogous to that of starving animals), which implies a context for the development of possible therapies for PDACs. The simple tumour imaging system visualises a potential of PDAC cells, in which the aggressive tumour dynamics reminds us of the need to review traditional PDAC pathogenesis.