Structural determinants of water permeation through aquaporin-1

Refined structure of alpha beta-tubulin at 3.5 A resolution

We present a refined model of the alpha beta-tubulin dimer to 3.5 A resolution. An improved experimental density for the zinc-induced tubulin sheets was obtained by adding 114 electron diffraction patterns at 40-60 degrees tilt and increasing the completeness of structure factor amplitudes to 84.7 %. The refined structure was obtained using maximum-likelihood including phase information from experimental images, and simulated annealing Cartesian refinement to an R-factor of 23.2 and free R-factor of 29.7. The current model includes residues alpha:2-34, alpha:61-439, beta:2-437, one molecule of GTP, one of GDP, and one of taxol, as well as one magnesium ion at the non-exchangeable nucleotide site, and one putative zinc ion near the M-loop in the alpha-tubulin subunit. The acidic C-terminal tails could not be traced accurately, neither could the N-terminal loop including residues 35-60 in the alpha-subunit. There are no major changes in the overall fold of tubulin with respect to the previous structure, testifying to the quality of the initial experimental phases. The overall geometry of the model is, however, greatly improved, and the position of side-chains, especially those of exposed polar/charged groups, is much better defined. Three short protein sequence frame shifts were detected with respect to the non-refined structure. In light of the new model we discuss details of the tubulin structure such as nucleotide and taxol binding sites, lateral contacts in zinc-sheets, and the significance of the location of highly conserved residues.

Desiccation tolerance: a simple process?

Water is essential for life, and thus the removal of water from a cell is a severe, often lethal stress. This is not a remarkable observation but it is one that is often taken for granted. Desiccation-tolerant cells implement structural, physiological and molecular mechanisms to survive severe water deficit. These mechanisms, and the components and pathways which facilitate them, are poorly understood. Here, recent developments are considered to illustrate the importance of desiccation, longevity and cell stasis in basic microbiology, and the relevance of the topic to the metabolic engineering of sensitive cells, including those of humans.

The mechanism of glycerol conduction in aquaglyceroporins

BACKGROUND

The E. coli glycerol facilitator, GlpF, selectively conducts glycerol and water, excluding ions and charged solutes. The detailed mechanism of the glycerol conduction and its relationship to the characteristic secondary structure of aquaporins and to the NPA motifs in the center of the channel are unknown.

RESULTS

Molecular dynamics simulations of GlpF reveal spontaneous glycerol and water conduction driven, on a nanosecond timescale, by thermal fluctuations. The bidirectional conduction, guided and facilitated by the secondary structure, is characterized by breakage and formation of hydrogen bonds for which water and glycerol compete. The conduction involves only very minor changes in the protein structure, and cooperativity between the GlpF monomers is not evident. The two conserved NPA motifs are strictly linked together by several stable hydrogen bonds and their asparagine side chains form hydrogen bonds with the substrates passing the channel in single file.

CONCLUSIONS

A complete conduction of glycerol through the GlpF was deduced from molecular dynamics simulations, and key residues facilitating the conduction were identified. The nonhelical parts of the two half-membrane-spanning segments expose carbonyl groups towards the channel interior, establishing a curve-linear pathway. The conformational stability of the NPA motifs is important in the conduction and critical for selectivity. Water and glycerol compete in a random manner for hydrogen bonding sites in the protein, and their translocations in single file are correlated. The suggested conduction mechanism should apply to the whole family.

Stability of membrane proteins: relevance for the selection of appropriate methods for high-resolution structure determinations

High stability is a prominent characteristic of integral membrane proteins of known atomic structure. But rather than being an intrinsic property, it may be due to a selection exerted by biochemical procedures prior to structure determination, since solubilization results in the transient exposure of membrane proteins to solution conditions. This may cause structural perturbations that interfere with 3D crystallization and hence with X-ray analysis. This problem also affects the preparation of samples for electron crystallography and NMR studies and may account for the fact that high-resolution structures of representatives of whole groups, such as transport proteins and signal transducers, have not been elucidated so far by any method. A knowledge of the proportion of labile proteins among membrane proteins, and of the kinetics of their denaturation, is therefore necessary. Establishing stability profiles, developing methods to maintain lateral pressure, or preventing contact with water (or both) should prove significant in establishing the structures of conformationally flexible proteins.

Low aquaporin content and low osmotic water permeability of the plasma and vacuolar membranes of a CAM plant Graptopetalum paraguayense: comparison with radish

Aquaporin facilitates the osmotic water transport across biomembranes and is involved in the transcellular and intracellular water flow in plants. We immunochemically quantified the aquaporin level in leaf plasma membranes (PM) and tonoplast of Graptopetalum paraguayense, a Crassulacean acid metabolism (CAM) plant. The aquaporin content in the Graptopetalum tonoplast was approximately 1% of that of radish. The content was calculated to be about 3 microg mg(-1) of tonoplast protein. The level of PM aquaporin in Graptopetalum was determined to be less than 20% of that of radish, in which an aquaporin was a major protein of the PM. The PM aquaporin was detected in the mesophyll tissue of Graptopetalum leaf by tissue print immunoblotting. The osmotic water permeability of PM and tonoplast vesicles prepared from both plants was determined with a stopped-flow spectrophotometer. The water permeability of PM was lower than that of the tonoplast in both plants. The Graptopetalum PM vesicles hardly showed water permeability, although the tonoplast showed a relatively high permeability. The water permeability changed depending on the assay temperature and was also partially inhibited by a sulfhydryl reagent. Furthermore, measurement of the rate of swelling and shrinking in different mannitol concentrations revealed that the protoplasts of Graptopetalum showed low water permeability. These results suggest that the low content of aquaporins in PM and tonoplast is one of the causes of the low water permeability of GRAPTOPETALUM: The relationship between the water-storage function of succulent leaves of CAM plants and the low aquaporin level is also discussed.

Electron cryomicroscopy methods

Electron cryomicroscopy methods comprise a rapidly expanding field providing insights into the structure and function of biological macromolecules and their supramolecular assemblies. The 3.8 A resolution structure of the membrane protein aquaporin, a view of the herpesvirus capsid at 8.5 A and the 10 A resolution structure of the spliceosomal U1 small nuclear ribonucleoprotein complex are three outstanding examples emphasizing the versatility of this technique.

Three families with autosomal dominant nephrogenic diabetes insipidus caused by aquaporin-2 mutations in the C-terminus

The vasopressin-regulated water channel aquaporin-2 (AQP2) is known to tetramerize in the apical membrane of the renal tubular cells and contributes to urine concentration. We identified three novel mutations, each in a single allele of exon 4 of the AQP2 gene, in three families showing autosomal dominant nephrogenic diabetes insipidus (NDI). These mutations were found in the C-terminus of AQP2: a deletion of G at nucleotide 721 (721 delG), a deletion of 10 nucleotides starting at nucleotide 763 (763-772del), and a deletion of 7 nucleotides starting at nucleotide 812 (812-818del). The wild-type AQP2 is predicted to be a 271-amino acid protein, whereas these mutant genes are predicted to encode proteins that are 330-333 amino acids in length, because of the frameshift mutations. Interestingly, these three mutant AQP2s shared the same C-terminal tail of 61 amino acids. In Xenopus oocytes injected with mutant AQP2 cRNAs, the osmotic water permeability (Pf) was much smaller than that of oocytes with the AQP2 wild-type (14%-17%). Immunoblot analysis of the lysates of the oocytes expressing the mutant AQP2s detected a band at 34 kD, whereas the immunoblot of the plasma-membrane fractions of the oocytes and immunocytochemistry failed to show a significant surface expression, suggesting a defect in trafficking of these mutant proteins. Furthermore, coinjection of wild-type cRNAs with mutant cRNAs markedly decreased the oocyte Pf in parallel with the surface expression of the wild-type AQP2. Immunoprecipitation with antibodies against wild-type and mutant AQP2 indicated the formation of mixed oligomers composed of wild-type and mutant AQP2 monomers. Our results suggest that the trafficking of mutant AQP2 is impaired because of elongation of the C-terminal tail, and the dominant-negative effect is attributed to oligomerization of the wild-type and mutant AQP2s. Segregation of the mutations in the C-terminus of AQP2 with dominant-type NDI underlies the importance of this domain in the intracellular trafficking of AQP2.

Analysis of the pore of the unusual major intrinsic protein channel, yeast Fps1p

Fps1p is a glycerol efflux channel from Saccharomyces cerevisiae. In this atypical major intrinsic protein neither of the signature NPA motifs of the family, which are part of the pore, is preserved. To understand the functional consequences of this feature, we analyzed the pseudo-NPA motifs of Fps1p by site-directed mutagenesis and assayed the resultant mutant proteins in vivo. In addition, we took advantage of the fact that the closest bacterial homolog of Fps1p, Escherichia coli GlpF, can be functionally expressed in yeast, thus enabling the analysis in yeast cells of mutations that make this typical major intrinsic protein more similar to Fps1p. We observed that mutations made in Fps1p to "restore" the signature NPA motifs did not substantially affect channel function. In contrast, when GlpF was mutated to resemble Fps1p, all mutants had reduced activity compared with wild type. We rationalized these data by constructing models of one GlpF mutant and of the transmembrane core of Fps1p. Our model predicts that the pore of Fps1p is more flexible than that of GlpF. We discuss the fact that this may accommodate the divergent NPA motifs of Fps1p and that the different pore structures of Fps1p and GlpF may reflect the physiological roles of the two glycerol facilitators.

Glutamate transporters combine transporter- and channel-like features

Glutamate transporters in the mammalian central nervous system have a unique position among secondary transport proteins as they exhibit glutamate-gated chloride-channel activity in addition to glutamate-transport activity. In this article, the available data on the structure of the glutamate transporters are compared with high-resolution crystal structures of channel proteins. In addition, binding-site properties of glutamate transporters, and the ligand-binding site of an ionotropic glutamate receptor of which the crystal structure is known, are compared. Possible structural solutions for the combination of channel and transporter activity in one membrane protein are proposed.

[Activation of ATP-sensitive K+ channels by ADP and K+ channel openers: homology model of sulfonylurea receptor carboxyl-termini]

The ATP-sensitive K+ channels (KATP) are composed of Kir6.0 subunits and sulfonylurea receptors (SUR1, 2A and 2B). SUR2A and SUR2B are splice variants and differ only in the C-terminal 42 amino acid residue (C42). SURs are supposed to be the subunit that determines the different response of KATPs to intracellular nucleotides, K+ channel openers and inhibitors. In this study, we report that C42 of SURs plays critical roles in differential activation of various KATPs by ADP and K+ channel openers such as diazoxide and nicorandil. KATPs containing distinct SURs and Kir6.2 were reconstructed on HEK293T cells. Much higher concentrations of ADP were necessary to activate channels which SUR1 or SUR2B. In all KATPs containing different SUR, diazoxide increased the potency of ADP for channel activity without affecting its efficacy. From the electrophysiological data obtained from C-terminal chimeras and point mutants in the second nucleotide binding domain (NBDs), we developed the homology model of each SUR-NBD2 based on the crystallgraphically determined structure of HisP, a member of the ABC protein superfamily. In this model, C42 is located just beneath the Walker A motif of NBD2 and regulates the binding of nucleotide to NBD2 by affecting the 3-D construct of NBD2. This homology model well explains the different response of KATPs to ADP. Based on this model, it will be possible to develop new ligands for KATPs.

A refined structure of human aquaporin-1

A refined structure of the human water channel aquaporin-1 is presented. The model rests on the high resolution X-ray structure of the homologous bacterial glycerol transporter GlpF, electron crystallographic data at 3.8 A resolution and a multiple sequence alignment of the aquaporin superfamily. The crystallographic R and free R values (36.7% and 37.8%) for the refined structure are significantly lower than for previous models. Improved geometry and enhanced stability in molecular dynamics simulations demonstrate a significant improvement of the aquaporin-1 structure. Comparison with previous aquaporin-1 models shows significant differences, not only in the loop regions, but also in the core of the water channel.

Overexpression of mammalian integral membrane proteins for structural studies

Recent successes in the determination of atomic resolution structures of integral membrane proteins have relied on purifying the proteins from abundant natural sources. In contrast, the majority of mammalian receptors, ion channels and transporters need to be overexpressed to obtain sufficient material for structural studies. This has often proved to be very difficult. Overexpression studies on a wide range of mammalian membrane proteins have shown that a few can be expressed functionally in bacteria, but many others require an insect or mammalian cell host for activity or high level expression. The serotonin transporter, which has been expressed in all the major hosts available, is a good example that has given insights into the problem of overexpressing mammalian membrane proteins for structural studies.

Two-dimensional crystallization of membrane proteins: the lipid layer strategy

Due to the difficulty to crystallize membrane proteins, there is a considerable interest to intensify research topics aimed at developing new methods of crystallization. In this context, the lipid layer crystallization at the air/water interface, used so far for soluble proteins, has been recently adapted successfully to produce two-dimensional (2D) crystals of membrane proteins, amenable to structural analysis by electron crystallography. Besides to represent a new alternative strategy, this approach gains the advantage to decrease significantly the amount of material needed in incubation trials, thus opening the field of crystallization to those membrane proteins difficult to surexpress and/or purify. The systematic studies that have been performed on different classes of membrane proteins are reviewed and the physico-chemical processes that lead to the production of 2D crystals are addressed. The different drawbacks, advantages and perspectives of this new strategy for providing structural information on membrane proteins are discussed.

Molecular dynamics study of aquaporin-1 water channel in a lipid bilayer

The aquaporin-1 water channel was modeled in a palmitoyl-oleoyl-phosphatidyl-choline lipid bilayer, by means of molecular dynamics simulations. Interaction of the protein with the membrane and inter-monomer interactions were analyzed. Structural features of the channel important for its biological function, including the Asn-Pro-Ala (NPA) motifs, and the diffusion of water molecules into the channels, were investigated. Simulations revealed the formation of single file water inside the channels for certain relative positions of the NPA motifs.

Two-dimensional crystals: a powerful approach to assess structure, function and dynamics of membrane proteins

Electron crystallography and atomic force microscopy allow the study of two-dimensional membrane protein crystals. While electron crystallography provides atomic scale three-dimensional density maps, atomic force microscopy gives insight into the surface structure and dynamics at sub-nanometer resolution. Importantly, the membrane protein studied is in its native environment and its function can be assessed directly. The approach allows both the atomic structure of the membrane protein and the dynamics of its surface to be analyzed. In this way, the function-related conformational changes can be assessed, thus providing a detailed insight on the molecular mechanisms of essential biological processes.

Water and ion permeation of aquaporin-1 in planar lipid bilayers. Major differences in structural determinants and stoichiometry

The aquaporin-1 (AQP1) water channel protein is known to facilitate the rapid movement of water across cell membranes, but a proposed secondary role as an ion channel is still unsettled. Here we describe a method to simultaneously measure water permeability and ion conductance of purified human AQP1 after reconstitution into planar lipid bilayers. Water permeability was determined by measuring Na(+) concentrations adjacent to the membrane. Comparisons with the known single channel water permeability of AQP1 indicate that the planar lipid bilayers contain from 10(6) to 10(7) water channels. Addition of cGMP induced ion conductance in planar bilayers containing AQP1, whereas cAMP was without effect. The number of water channels exceeded the number of active ion channels by approximately 1 million-fold, yet p-chloromethylbenzenesulfonate inhibited the water permeability but not ion conductance. Identical ion channel parameters were achieved with AQP1 purified from human red blood cells or AQP1 heterologously expressed in Saccharomyces cerevisae and affinity purified with either N- or C-terminal poly-histidine tags. Rp-8-Br-cGMP inhibited all of the observed conductance levels of the cation selective channel (2, 6, and 10 pS in 100 mm Na(+) or K(+)). Deletion of the putative cGMP binding motif at the C terminus by introduction of a stop codon at position 237 yielded a truncated AQP1 protein that was still permeated by water but not by ions. Our studies demonstrate a method for simultaneously measuring water permeability and ion conductance of AQP1 reconstituted into planar lipid bilayers. The ion conductance occurs (i) through a pathway distinct from the aqueous pathway, (ii) when stimulated directly by cGMP, and (iii) in only an exceedingly small fraction of AQP1 molecules.

Highly selective water channel activity measured by voltage clamp: analysis of planar lipid bilayers reconstituted with purified AqpZ

Aquaporins are membrane channels selectively permeated by water or water plus glycerol. Conflicting reports have described ion conductance associated with some water channels, raising the question of whether ion conductance is a general property of the aquaporin family. To clarify this question, a defined system was developed to simultaneously measure water permeability and ion conductance. The Escherichia coli water channel aquaporin-Z (AqpZ) was studied, because it is a highly stable tetramer. Planar lipid bilayers were formed from unilamellar vesicles containing purified AqpZ. The hydraulic conductivity of bilayers made from the total extract of E. coli lipids increased 3-fold if reconstituted with AqpZ, but electric conductance was unchanged. No channel activity was detected under voltage-clamp conditions, indicating that less than one in 10(9) transport events is electrogenic. Microelectrode measurements were simultaneously undertaken adjacent to the membrane. Changes in sodium concentration profiles accompanying transmembrane water flow permitted calculation of the activation energies: 14 kcal/mol for protein-free lipid bilayers and 4 kcal/mol for lipid bilayers containing AqpZ. Neither the water permeability nor the electric conductivity exhibited voltage dependence. This sensitive system demonstrated that AqpZ is permeated by water but not charged ions and should permit direct analyses of putative electrogenic properties of other aquaporins.

Photosystem II: the solid structural era

Understanding the precise role of photosystem II as an element of oxygenic photosynthesis requires knowledge of the molecular structure of this membrane protein complex. The past few years have been particularly exciting because the structural era of the plant photosystem II has begun. Although the atomic structure has yet to be determined, the map obtained at 6 A resolution by electron crystallography allows assignment of the key reaction center subunits with their associated pigment molecules. In the following, we first review the structural details that have recently emerged and then discuss the primary and secondary photochemical reaction pathways. Finally, in an attempt to establish the evolutionary link between the oxygenic and the anoxygenic photosynthesis, a framework structure common to all photosynthetic reaction centers has been defined, and the implications have been described.

The complete set of genes encoding major intrinsic proteins in Arabidopsis provides a framework for a new nomenclature for major intrinsic proteins in plants

Major intrinsic proteins (MIPs) facilitate the passive transport of small polar molecules across membranes. MIPs constitute a very old family of proteins and different forms have been found in all kinds of living organisms, including bacteria, fungi, animals, and plants. In the genomic sequence of Arabidopsis, we have identified 35 different MIP-encoding genes. Based on sequence similarity, these 35 proteins are divided into four different subfamilies: plasma membrane intrinsic proteins, tonoplast intrinsic proteins, NOD26-like intrinsic proteins also called NOD26-like MIPs, and the recently discovered small basic intrinsic proteins. In Arabidopsis, there are 13 plasma membrane intrinsic proteins, 10 tonoplast intrinsic proteins, nine NOD26-like intrinsic proteins, and three small basic intrinsic proteins. The gene structure in general is conserved within each subfamily, although there is a tendency to lose introns. Based on phylogenetic comparisons of maize (Zea mays) and Arabidopsis MIPs (AtMIPs), it is argued that the general intron patterns in the subfamilies were formed before the split of monocotyledons and dicotyledons. Although the gene structure is unique for each subfamily, there is a common pattern in how transmembrane helices are encoded on the exons in three of the subfamilies. The nomenclature for plant MIPs varies widely between different species but also between subfamilies in the same species. Based on the phylogeny of all AtMIPs, a new and more consistent nomenclature is proposed. The complete set of AtMIPs, together with the new nomenclature, will facilitate the isolation, classification, and labeling of plant MIPs from other species.

Mercurial sensitivity of aquaporin 1 endofacial loop B residues

The water channel protein aquaporin-1 (AQP1) has two asparagine-proline-alanine (NPA) repeats on loops B and E. From recent structural information, these loops are on opposite sides of the membrane and meet to form a pore. We replaced the mercury-sensitive residue cysteine 189 in AQP1 by serine to obtain a mercury-insensitive template (C189S). Subsequently, we substituted three consecutive cysteines for residues 71-73 near the first NPA repeat (76-78) in intracellular loop B, and investigated whether they were accessible to extracellular mercurials. AQP1 and its mutants were expressed in Xenopus laevis oocytes, and the osmotic permeability (P(f)) of the oocytes was determined. C189S had wild-type P(f) but was not sensitive to HgCl(2). Expression of all three C189S cysteine mutants resulted in increased P(f), and all three mutants regained mercurial sensitivity. These results, especially the inhibitions by the large mercurial p-chloromercunbenzene-sulfonic acid (pCMBS) ( approximately 6A wide), suggest that residues 71-73 at the pore are accessible to extracellular mercurials. A 30-ps molecular dynamics simulation (at 300 K) starting with crystallographic coordinates of AQP1 showed that the width of the pore bottleneck (between Connolly surfaces) can vary (w(avg) = 3.9 A, sigma = 0.75; hydrated AQP1). Thus, although the pore width would be > or = 6 A only for 0.0026 of the time, this might suffice for pCMBS to reach residues 71-73. Alternative explanations such as passage of pCMBS across the AQP1 tetramer center or other unspecified transmembrane pathways cannot be excluded.

Oligomerization of water and solute channels of the major intrinsic protein (MIP) family

Water and small solute fluxes through cell membranes are ensured in many tissues by selective pores that belong to the major intrinsic protein family (MIP). This family includes the water channels or aquaporins (AQP) and the neutral solute facilitators such as the glycerol facilitator (GlpF). We have compared the characteristics of representatives of each subfamily. Following solubilization in the nondenaturing detergents n-octyl-glucoside (OG) and Triton X-100 (T-X100), AQPs remain in their native homotetrameric state, while GlpF always behaves as a monomer. Solute facilitators are fully solubilized by the detergent N-lauroyl sarcosine (NLS), while AQPs are not. Analyses of mutants and chimeras demonstrate a close correlation between the water transport function and the resistance to NLS solubilization. Thus, AQPs and solute facilitators exhibit different behaviors in mild detergents; this could reflect differences in quaternary organization within the membranes. We propose that the oligomerization state or the strength of self-association is part of the mechanisms used by MIP proteins to ensure solute selectivity.

Projection structure and oligomeric properties of a bacterial core protein translocase

The major route for protein export or membrane integration in bacteria occurs via the Sec-dependent transport apparatus. The core complex in the inner membrane, consisting of SecYEG, forms a protein-conducting channel, while the ATPase SecA drives translocation of substrate across the membrane. The SecYEG complex from Escherichia coli was overexpressed, purified and crystallized in two dimensions. A 9 A projection structure was calculated using electron cryo-microscopy. The structure exhibits P12(1) symmetry, having two asymmetric units inverted with respect to one another in the unit cell. The map shows elements of secondary structure that appear to be transmembrane helices. The crystallized form of SecYEG is too small to comprise the translocation channel and does not contain a large pore seen in other studies. In detergent solution, the SecYEG complex displays an equilibrium between monomeric and tetrameric forms. Our results therefore indicate that, unlike other known channels, the SecYEG complex can exist as both an assembled channel and an unassembled smaller unit, suggesting that transitions between the two states occur during a functional cycle.

Comparative nuclear magnetic resonance studies of water permeability of red blood cells from maternal venous blood and newborn umbilical cord blood

Comparative morphological and nuclear magnetic resonance (NMR) measurements of the diffusional permeability (Pd) were performed on red blood cells (RBCs) from maternal venous blood and fetal RBCs, isolated from cord blood taken at delivery. Fetal RBC had a diameter of 8.79+/-0.03 microm (mean+/-standard deviation, SD), a volume of 103 microm3 and a surface area of 157 microm2. We report here the first comparative measurements of Pd of maternal and fetal RBCs by using a Mn2+-doping NMR technique. The values of Pd were, in the case of maternal RBC, 3.7 x 10(-3) cm/s at 15 degrees C, 4.1 x 10(-3) cm/s at 10 degrees C, 4.9 x 10(-3) cm/s at 25 degrees C, 5.2 x 10(-3) cm/s at 30 degrees C and 7.2 x 10(-3) cm/s at 37 degrees C. For fetal RBC all corresponding Pd values were almost half, namely 2.0 x 10(-3) cm/s at 15 degrees C, 2.3 x 10(-3) cm/s at 20 degrees C, 2.8 x 10(-3) cm/s at 25 degrees C, 3.4 x 10(-3) cm/s at 30 degrees C and 4.4 x 10(-3) cm/s at 37 degrees C. The decreased Pd values of fetal RBCs were probably due to lower channel-mediated water permeability compared with adult RBCs. The values of the activation energy for water permeability (E(a,d)) were significantly higher for fetal RBCs (27.6+/-5.0 kJ/mol) than for adult RBCs (22.8+/-2.7 kJ/mol). A positive correlation between the Pd values of the two kinds of RBCs was found. This points to the genetic basis for the determination of RBC water permeability.

The internal repeats in the Na+/Ca2+ exchanger-related Escherichia coli protein YrbG have opposite membrane topologies

We have determined the topology of the Escherichia coli inner membrane protein YrbG, a putative Na(+)/Ca(2+) exchanger with homology to a family of eukaryotic ion exchangers. Our results show that the two homologous halves of YrbG both have five transmembrane segments but opposite membrane orientations. This has implications for our understanding of the function of Na(+)/Ca(2+) exchangers and provides an example of "divergent" evolution of membrane protein topology.

Helical membrane proteins: diversity of functions in the context of simple architecture

During the past year, research on helical membrane proteins has brought insights into the use of deviations from canonical alpha-helical conformation to support function and the further investigation of the sequestration of protein regions from the lipid bilayer to enhance these structural alternatives. Also, the structural roles of polar sidechains, the identification of motifs in helix interactions and the significance of certain topologies on a genome-wide scale have been further explored.

Cysteine mutagenesis reveals novel structure-function features within the predicted third extracellular loop of the type IIa Na(+)/P(i) cotransporter

The transport function of the rat type IIa Na(+)/P(i) cotransporter is inhibited after binding the cysteine modifying reagent 2-aminoethyl methanethiosulfonate hydrobromide (MTSEA) to a cysteine residue substituted for a serine at position 460 (S460C) in the predicted third extracellular loop. This suggests that Ser-460 lies in a functionally important region of the protein. To establish a "structure-function" profile for the regions that flank Ser-460, the substituted cysteine accessibility method was employed. 18 mutants were constructed in which selected amino acids from Arg-437 through Leu-465 were substituted one by one for a cysteine. Mutants were expressed in Xenopus oocytes and transport function (cotransport and slippage) and kinetics were assayed by electrophysiology with or without prior treatment with cysteine modifying (methanethiosulfonate, MTS) reagents. Except for mutant I447C, mutants with cysteines at sites from Arg-437 through Thr-449, as well as Pro-461, were inactive. Cotransport function of mutants with Cys substitutions at sites Arg-462 through Leu-465 showed low sensitivity to MTS reagents. The preceding mutants (Cys substitution at Thr-451 to Ser-460) showed a periodic accessibility pattern that would be expected for an alpha-helix motif. Apart from loss of transport function, exposure of mutants A453C and A455C to MTSEA or 2-(triethylammonium)ethyl MTS bromide (MTSET) increased the uncoupled slippage current, which implicated the mutated sites in the leak pathway. Mutants from Ala-453 through Ala-459 showed less pH dependency, but generally stronger voltage dependency compared with the wild type, whereas those flanking this group were more sensitive to pH and showed weaker voltage dependence of cotransport mode kinetics. Our data indicate that parts of the third extracellular loop are involved in the translocation of the fully loaded carrier and show a membrane-associated alpha-helical structure.

Structural and functional diversity of blood group antigens

Biochemical and molecular genetic studies have revealed that blood group antigens are present on cell surface molecules of wide structural diversity, including carbohydrate epitopes on glycoproteins and/or glycolipids, and peptide antigens on proteins inserted within the membrane via single or multi-pass transmembrane domains, or via glycosylphosphatidylinositol linkages. These studies have also shown that some blood group antigens are carried by complexes consisting of several membrane components which may be lacking or severely deficient in rare blood group 'null' phenotypes. In addition, although all blood group antigens are serologically detectable on red blood cells (RBCs), most of them are also expressed in non-erythroid tissues, raising further questions on their physiological function under normal and pathological conditions. In addition to their structural diversity, blood group antigens also possess wide functional diversity, and can be schematically subdivided into five classes: i) transporters and channels; ii) receptors for ligands, viruses, bacteria and parasites; iii) adhesion molecules; iv) enzymes; and v) structural proteins. The purpose of this review is to summarize recent findings on these molecules, and in particular to illustrate the existing structure-function relationships.

TONOPLAST TRANSPORTERS: Organization and Function

Regulation of the contents and volume of vacuoles in plant cells depends on the coordinated activities of transporters and channels located in the tonoplast (vacuolar membrane). The three major components of the tonoplast are two proton pumps, the vacuolar H+-ATPase (V-ATPase) and H+-pyrophosphatase (V-PPase), and aquaporins. The tertiary structure of the V-ATPase complex and properties of its subunits have been characterized by biochemical and genetic techniques. These studies and a comparison with the F-type ATPase have enabled estimation of the dynamics of V-ATPase activity during catalysis. V-PPase, a simple proton pump, has been identified and cloned from various plant species and other organisms, such as algae and phototrophic bacteria, and functional motifs of the enzyme have been determined. Aquaporin, serving as the water channel, is the most abundant protein in the tonoplast in most plants. A common molecular architecture of aquaporins in mammals and plants has been determined by two-dimensional crystallographic analysis. Furthermore, recent molecular biological studies have revealed several other types of tonoplast transporters, such as the Ca2+-ATPase, Ca2+/H+ antiporter and Na+/H+ antiporter. Many other transporters and channels in the tonoplast remain to be identified; their activities have already been detected. This review presents an overview of the field and discusses recent findings on the tonoplast protein components that have been identified and their physiological consequences.

Cardiac Na + -Ca 2+ Exchange

Abstract —The Na + -Ca 2+ exchanger (NCX) is one of the essential regulators of Ca 2+ homeostasis in cardiomyocytes and thus an important modulator of the cardiac contractile function. The purpose of this review is to survey recent advances in cardiac NCX research, with particular emphasis on molecular and pharmacological aspects. The NCX function is thought to be regulated by a variety of cellular factors. However, data obtained by use of different experimental systems often appear to be in conflict. Where possible, we endeavor to provide a rational interpretation of such data. We also provide a summary of current work relating to the structure and function of the cardiac NCX. Recent molecular studies of the NCX protein are beginning to shed light on structural features of the ion translocation pathway in the NCX membrane domain, which seems likely to be formed, at least partly, by the phylogenetically conserved α-1 and α-2 repeat structures and their neighboring membrane-spanning segments. Finally, we discuss new classes of NCX inhibitors with improved selectivity. One of these, 2-[2-[4-(4-nitrobenzyloxy)phenyl]ethyl]isothiourea methanesulfonate (KB-R7943), appears to exhibit unique selectivity for Ca 2+ -influx–mode NCX activity. Data obtained with these inhibitors should provide a basis for designing more selective and clinically useful drugs targeting NCX.

Functional characterization of a microbial aquaglyceroporin

The major intrinsic proteins (MIPs) constitute a widespread membrane channel family essential for osmotic cell equilibrium. The MIPs can be classified into three functional subgroups: aquaporins, glycerol facilitators and aquaglyceroporins. Bacterial MIP genes have been identified in archaea as well as in Gram-positive and Gram-negative eubacteria. However, with the exception of Escherichia coli, most bacterial MIPs have been analysed by sequence homology. Since no MIP has yet been functionally characterized in Gram-positive bacteria, we have studied one of these members from Lactococcus lactis. This MIP is shown to be permeable to glycerol, like E. coli GlpF, and to water, like E. coli AqpZ. This is the first characterization of a microbial MIP that has a mixed function. This result provides important insights to reconstruct the evolutionary history of the MIP family and to elucidate the molecular pathway of water and other solutes in these channels.

Asymmetric arrangement of auxiliary subunits of skeletal muscle voltage-gated l-type Ca(2+) channel

Highly purified L-type Ca(2+) channel complexes containing all five subunits (alpha(1), alpha(2), beta, gamma, and delta) and complexes of alpha(1)-beta subunits were obtained from skeletal muscle triad membranes by three-step purification and by 1% Triton X-100 treatment, respectively. Their structures and the subunit arrangements were analyzed by electron microscopy. Projection images of negatively stained Ca(2+) channels and alpha(1)-beta complexes were aligned, classified and averaged. The alpha(1)-beta complex showed a hollow trapezoid shape of 12 nm height. In top view, four asymmetric domains surrounded a central depression predicted to form the channel pore. The complete Ca(2+) channel complex exhibited the cylindrical shape of 20 nm in height binding a spherical domain on one edge. Further image analysis of higher complexes of the Ca(2+) channel using a monoclonal antibody against the beta subunit showed that the alpha(1)-beta complex forms the non-decorated side of the cylinder, which can traverse the membrane from outside the cell to the cytoplasm. Based on these results, we propose that the Ca(2+) channel exhibits an asymmetric arrangement of auxiliary subunits.

The structure of glutamate transporters shows channel-like features

Neuronal and glial glutamate transporters remove the excitatory neurotransmitter glutamate from the synaptic cleft and thus prevent neurotoxicity. The proteins belong to a large family of secondary transporters, which includes transporters from a variety of bacterial, archaeal and eukaryotic organisms. The transporters consist of eight membrane-spanning alpha-helices and two pore-loop structures, which are unique among secondary transporters but may resemble pore-loops found in ion channels. Another distinctive structural feature is the presence of a highly amphipathic membrane-spanning alpha-helix that provides a hydrophilic path through the membrane. The unusual structural features of the transporters are discussed in relation to their function.

Application of the transition state theory to water transport across cell membranes

We have applied the transition state theory of Eyring et al. (The Theory of Rate Processes, McGraw-Hill, 1941) to water transport across cell membranes. We have then evaluated free energy (Delta F(not equal)), enthalpy (Delta H(not equal)) and entropy (Delta S(not equal)) of activation for water permeation across membranes, such as Arbacia eggs, Xenopus oocytes with or without aquaporin water channels, mammalian erythrocytes, aquaporin proteoliposomes, liposomes and collodion membrane. Delta H(not equal) was found to be correlated with Delta S(not equal). This is so-called Delta H(not equal) and Delta S(not equal) compensation over the ranges of Delta H(not equal) and Delta S(not equal) from 2 to 22 kcal/mol and from -26 to 45 e.u., respectively, indicating that low Delta H(not equal) values correspond to negative Delta S(not equal). Large positive Delta S(not equal) and high Delta H(not equal) values might be accompanied by reversible breakage of secondary bonds in the membrane, presumably in membrane lipid bilayer. Largely negative Delta S(not equal) and low Delta H(not equal) values for aquaporin water channels, aquaporin proteoliposomes and porous collodion membrane could be explained by the immobilization of permeating water molecules in the membrane, i.e., the partial loss of rotational and/or translational freedoms of water molecules in water channels.

Aquaporins constitute a large and highly divergent protein family in maize

Aquaporins (AQPs) are an ancient family of channel proteins that transport water and neutral solutes through a pore and are found in all eukaryotes and most prokaryotes. A comparison of the amino acid sequences and phylogenetic analysis of 31 full-length cDNAs of maize (Zea mays) AQPs shows that they comprise four different groups of highly divergent proteins. We have classified them as plasma membrane intinsic proteins (PIPs), tonoplast intrinsic proteins, Nod26-like intrinsic proteins, and small and basic intrinsic proteins. Amino acid sequence identities vary from 16% to 100%, but all sequences share structural motifs and conserved amino acids necessary to stabilize the two loops that form the aqueous pore. Most divergent are the small and basic integral proteins in which the first of the two highly conserved Asn-Pro-Ala motifs of the pore is not conserved, but is represented by alanine-proline-threonine or alanine-proline-serine. We present a model of ZmPIP1-2 based on the three-dimensional structure of mammalian AQP1. Tabulation of the number of times that the AQP sequences are found in a collection of databases that comprises about 470,000 maize cDNAs indicates that a few of the maize AQPs are very highly expressed and many are not abundantly expressed. The phylogenetic analysis supports the interpretation that the divergence of PIPs through gene duplication occurred more recently than the divergence of the members of the other three subfamilies. This study opens the way to analyze the function of the proteins in Xenopus laevis oocytes, determine the tissue specific expression of the genes, recover insertion mutants, and determine the in planta function.

Reconstitution and functional comparison of purified GlpF and AqpZ, the glycerol and water channels from Escherichia coli

A large family of membrane channel proteins selective for transport of water (aquaporins) or water plus glycerol (aquaglyceroporins) has been found in diverse life forms. Escherichia coli has two members of this family-a water channel, AqpZ, and a glycerol facilitator, GlpF. Despite having similar primary amino acid sequences and predicted structures, the oligomeric state and solute selectivity of AqpZ and GlpF are disputed. Here we report biochemical and functional characterizations of affinity-purified GlpF and compare it to AqpZ. Histidine-tagged (His-GlpF) and hemagglutinin-tagged (HA-GlpF) polypeptides encoded by a bicistronic construct were expressed in bacteria. HA-GlpF and His-GlpF appear to form oligomers during Ni-nitrilotriacetate affinity purification. Sucrose gradient sedimentation analyses showed that the oligomeric state of octyl glucoside-solubilized GlpF varies: low ionic strength favors subunit dissociation, whereas Mg(2+) stabilizes tetrameric assembly. Reconstitution of affinity-purified GlpF into proteoliposomes increases glycerol permeability more than 100-fold and water permeability up to 10-fold compared with control liposomes. Glycerol and water permeability of GlpF both occur with low Arrhenius activation energies and are reversibly inhibited by HgCl(2). Our studies demonstrate that, unlike AqpZ, a water-selective stable tetramer, purified GlpF exists in multiple oligomeric forms under nondenaturing conditions and is highly permeable to glycerol but less well permeated by water.

Functional analysis of mutations in SLC7A9, and genotype-phenotype correlation in non-Type I cystinuria

Cystinuria (OMIM 220100) is a common recessive disorder of renal reabsorption of cystine and dibasic amino acids that results in nephrolithiasis of cystine. Mutations in SLC3A1, which encodes rBAT, cause Type I cystinuria, and mutations in SLC7A9, which encodes a putative subunit of rBAT (b(o,+)AT), cause non-Type I cystinuria. Here we describe the genomic structure of SLC7A9 (13 exons) and 28 new mutations in this gene that, together with the seven previously reported, explain 79% of the alleles in 61 non-Type I cystinuria patients. These data demonstrate that SLC7A9 is the main non-Type I cystinuria gene. Mutations G105R, V170M, A182T and R333W are the most frequent SLC7A9 missense mutations found. Among heterozygotes carrying these mutations, A182T heterozygotes showed the lowest urinary excretion values of cystine and dibasic amino acids. Functional analysis of mutation A182T after co-expression with rBAT in HeLa cells revealed significant residual transport activity. In contrast, mutations G105R, V170M and R333W are associated to a complete or almost complete loss of transport activity, leading to a more severe urinary phenotype in heterozygotes. SLC7A9 mutations located in the putative transmembrane domains of b(o,+)AT and affecting conserved amino acid residues with a small side chain generate a severe phenotype, while mutations in non-conserved residues give rise to a mild phenotype. These data provide the first genotype-phenotype correlation in non-Type I cystinuria, and show that a mild urinary phenotype in heterozygotes may associate with mutations with significant residual transport activity.

Visualization of a water-selective pore by electron crystallography in vitreous ice

The water-selective pathway through the aquaporin-1 membrane channel has been visualized by fitting an atomic model to a 3.7-A resolution three-dimensional density map. This map was determined by analyzing images and electron diffraction patterns of lipid-reconstituted two-dimensional crystals of aquaporin-1 preserved in vitrified buffer in the absence of any additive. The aqueous pathway is characterized by a size-selective pore that is approximately 4.0 +/- 0.5A in diameter, spans a length of approximately 18A, and bends by approximately 25 degrees as it traverses the bilayer. This narrow pore is connected by wide, funnel-shaped openings at the extracellular and cytoplasmic faces. The size-selective pore is outlined mostly by hydrophobic residues, resulting in a relatively inert pathway conducive to diffusion-limited water flow. The apex of the curved pore is close to the locations of the in-plane pseudo-2-fold symmetry axis that relates the N- and C-terminal halves and the conserved, functionally important N76 and N192 residues.

Visualization of a water-selective pore by electron crystallography in vitreous ice

The water-selective pathway through the aquaporin-1 membrane channel has been visualized by fitting an atomic model to a 3.7-A resolution three-dimensional density map. This map was determined by analyzing images and electron diffraction patterns of lipid-reconstituted two-dimensional crystals of aquaporin-1 preserved in vitrified buffer in the absence of any additive. The aqueous pathway is characterized by a size-selective pore that is approximately 4.0 +/- 0.5A in diameter, spans a length of approximately 18A, and bends by approximately 25 degrees as it traverses the bilayer. This narrow pore is connected by wide, funnel-shaped openings at the extracellular and cytoplasmic faces. The size-selective pore is outlined mostly by hydrophobic residues, resulting in a relatively inert pathway conducive to diffusion-limited water flow. The apex of the curved pore is close to the locations of the in-plane pseudo-2-fold symmetry axis that relates the N- and C-terminal halves and the conserved, functionally important N76 and N192 residues.

MPtopo: A database of membrane protein topology

The reliability of the transmembrane (TM) sequence assignments for membrane proteins (MPs) in standard sequence databases is uncertain because the vast majority are based on hydropathy plots. A database of MPs with dependable assignments is necessary for developing new computational tools for the prediction of MP structure. We have therefore created MPtopo, a database of MPs whose topologies have been verified experimentally by means of crystallography, gene fusion, and other methods. Tests using MPtopo strongly validated four existing MP topology-prediction algorithms. MPtopo is freely available over the internet and can be queried by means of an SQL-based search engine.

Membrane proteins: Aquaporins--channels without ions

Recently determined structures have shed new light on the way that aquaporins act as passive, but selective, pores for the transport of small molecules--such as water or glycerol--across membranes.

Structural characterization of two aquaporins isolated from native spinach leaf plasma membranes

Two members of the aquaporin family, PM28A and a new one, PM28C, were isolated and shown to be the major constituents of spinach leaf plasma membranes. These two isoforms were identified and characterized by matrix-assisted laser desorption ionization-mass spectrometry. Edman degradation yielded the amino acid sequence of two domains belonging to the new isoform. PM28B, a previously described isoform, was not found in our preparations. Scanning transmission electron microscopy mass analysis revealed both PM28 isoforms to be tetrameric. Two types of particles, a larger and a smaller one, were found by transmission electron microscopy of negatively stained solubilized proteins and by atomic force microscopy of PM28 two-dimensional crystals. The ratio of larger to smaller particles observed by transmission electron microscopy and single particle analysis correlated with the ratio of PM28A to PM28C determined by matrix-assisted laser desorption ionization-mass spectrometry. The absence of PM28B and the ratio of PM28A to PM28C indicate that these plasma membrane intrinsic proteins are differentially expressed in spinach leaves. These findings suggest that differential expression of the various aquaporin isoforms may regulate the water flux across the plasma membrane, in addition to the known mechanism of regulation by phosphorylation.

Fourier Amplitude Decay of Electron Cryomicroscopic Images of Single Particles and Effects on Structure Determination

Several factors, including spatial and temporal coherence of the electron microscope, specimen movement, recording medium, and scanner optics, contribute to the decay of the measured Fourier amplitude in electron image intensities. We approximate the combination of these factors as a single Gaussian envelope function, the width of which is described by a single experimental B-factor. We present an improved method for estimating this B-factor from individual micrographs by combining the use of X-ray solution scattering and numerical fitting to the average power spectrum of particle images. A statistical estimation from over 200 micrographs of herpes simplex virus type-1 capsids was used to estimate the spread in the experimental B-factor of the data set. The B-factor is experimentally shown to be dependent on the objective lens defocus setting of the microscope. The average B-factor, the X-ray scattering intensity of the specimen, and the number of particles required to determine the structure at a lower resolution can be used to estimate the minimum fold increase in the number of particles that would be required to extend a single particle reconstruction to a specified higher resolution. We conclude that microscope and imaging improvements to reduce the experimental B-factor will be critical for obtaining an atomic resolution structure.

Determining the structure of biological macromolecules by transmission electron microscopy, single particle analysis and 3D reconstruction

Single particle analysis and 3D reconstruction of molecules imaged by transmission electron microscopy have provided a wealth of medium to low resolution structures of biological molecules and macromolecular complexes, such as the ribosome, viruses, molecular chaperones and photosystem II. In this review, the principles of these techniques are introduced in a non-mathematical way, and single particle analysis is compared to other methods used for structural studies. In particular, the recent X-ray structures of the ribosome and of ribosomal subunits allow a critical comparison of single particle analysis and X-ray crystallography. This has emphasised the rapidity with which single particle analysis can produce medium resolution structures of complexes that are difficult to crystallise. Once crystals are available, X-ray crystallography can produce structures at a much higher resolution. The great similarities now seen between the structures obtained by the two techniques reinforce confidence in the use of single particle analysis and 3D reconstruction, and show that for electron cryo-microscopy structure distortion during sample preparation and imaging has not been a significant problem. The ability to analyse conformational flexibility and the ease with which time-resolved studies can be performed are significant advantages for single particle analysis. Future improvements in single particle analysis and electron microscopy should increase the attainable resolution. Combining single particle analysis of macromolecular complexes and electron tomography of subcellular structures with high-resolution X-ray structures may enable us to realise the ultimate dream of structural biology-a complete description of the macromolecular complexes of the cell in their different functional states.

The 6.9-A structure of GlpF: a basis for homology modeling of the glycerol channel from Escherichia coli

The three-dimensional structure of GlpF, the glycerol facilitator of Escherichia coli, was determined by cryo-electron microscopy. The 6.9-A density map calculated from images of two-dimensional crystals shows the GlpF helices to be similar to those of AQP1, the erythrocyte water channel. While the helix arrangement of GlpF does not reflect the larger pore diameter as seen in the projection map, additional peripheral densities observed in GlpF are compatible with the 31 additional residues in loops C and E, which accordingly do not interfere with the inner channel construction. Therefore, the atomic structure of AQP1 was used as a basis for homology modeling of the GlpF channel, which is predicted to be free of bends, wider, and more vertically oriented than the AQP1 channel. Furthermore, the residues facing the GlpF channel exhibit an amphiphilic nature, being hydrophobic on one side and hydrophilic on the other side. This property may partially explain the contradiction of glycerol diffusion but limited water permeation capacity.