Recent developments in chiral capillary electrophoresis and applications of this technique to pharmaceutical and biomedical analysis

Capillary electrophoresis technologies for screening in drug discovery

The high separation efficiency of capillary electrophoresis (CE), combined with the high selectivity and sensitivity of mass spectrometry (MS) detection offers the potential of unique resolving power and high-throughput capacity to the analysis and structural identification of complex mixtures. Recent advances in CE-MS interfaces and commercially available 96-capillary instruments have made the implementation of routine CE methods for drug screening feasible.:

Chiral separation of highly negatively charged enantiomers by capillary electrophoresis

The separation of two highly negatively charged enantiomeric organic disulfates containing two chiral centers was investigated by capillary electrophoresis using cyclodextrin based chiral selectors added to the run buffer. The optimum separation for the enantiomers was achieved in less than 3 min at 25 degrees C with a run buffer of 10 mM glycine pH 2.4 and 5 mM QA-beta-CD, which is a positively charged quaternary ammonium beta-cyclodextrin derivative. The method resulted in baseline resolution, excellent linearity, and highly reproducible migration times allowing facile evaluation of the enantiomeric purity of the individual isomers. Detection limits for the enantiomeric pair were determined to be 0.3 ng/microl (S/N = 3). The nature of the selector-enantiomer interaction and a quantitative measurement of the apparent stability constants that governed chiral discrimination of the enantiomers with QA-beta-CD were also investigated by UV-Vis spectroscopy and electrospray ionization mass spectrometry.

Subsecond chiral separations on a microchip

Fast chiral separation of DNS-amino acids could be realized using microchip electrophoresis with fluorescence detection. For this purpose, highly sulfated cyclodextrins (HS-gamma-CD) were used as chiral selectors enabling high selectivity. Even subsecond separation of DNS-tryptophan, DNS-norleucine, DNS-phenylalanine, DNS-methionine, and DNS-aspartic acid could be achieved. Baseline separation could be accomplished within 720 ms, which is the fastest separation of enantiomers reported to date. A more complex mixture consisting of three chiral DNS-amino acids could be separated within 3.3 s utilizing a separation length of only 7 mm and an electrical field strength of 2012 V/cm.

Etched chemically modified capillaries: Novel separation media for electrophoretic analyses

The fabrication, properties, and applications of etched chemically modified capillaries for electrophoretic analysis are reviewed. It is shown that the etching process creates a surface that is fundamentally different than a bare fused silica capillary. The new surface matrix produces unique electroosmotic flow properties and is more compatible with basic and biological compounds. After chemical modification of the surface, the bonded organic moiety (stationary phase) contributes to the control of migration of solutes in the capillary. Both electrophoretic and chromatographic processes take place in the etched chemically modified capillaries leading to a variety of experimental variables (pH, buffer type, presence and amount of organic modifier, and temperature) that can be used to optimize separations. A number of examples of separations on these capillaries are presented as well as data on column ruggedness and reproducibility.

Separation of neutral dihydropyridines and their enantiomers using electrokinetic chromatography

The separation and simultaneous enantiomeric separation of three neutral 1,4-dihydropyridine (DHP) derivatives (nimodipine, nisoldipine and nitrendipine) was studied using electrokinetic chromatography. Bile salts allowed the non-chiral separation of these DHP derivatives. With the taurine-conjugated bile salts a beginning of enantiomeric separation was observed for nimodipine and nisoldipine. Achiral micelles of sodium dodecyl sulphate mixed with neutral cyclodextrins did not allow enantioseparation. Baseline chiral separation of nisoldipine and nimodipine was obtained with carboxymethyl-beta-cyclodextrin at pH 5.0. The buffer type affected the chiral separation, especially in the case of nisoldipine. The addition of organic solvent decreased the enantioresolution of nimodipine. However, the resolution between the nisoldipine enantiomers was increased when methanol or ethanol were added to the background electrolyte. Varying the temperature had almost no effect on the enantioresolution of nisoldipine, whereas with nimodipine a clear improvement at lower temperatures was observed. Using the optimised method, the selectivity of this method was investigated for three possible impurities of nisoldipine.

Enantioselective determination of the novel antidepressant mirtazapine and its active demethylated metabolite in human plasma by means of capillary electrophoresis

Mirtazapine is a recent noradrenergic and specific serotonergic antidepressant drug. A capillary electrophoretic method has been developed for the enantioseparation and analysis of mirtazapine and its main active metabolite, N-desmethylmirtazapine, in human plasma. For method optimisation several experimental parameters were investigated, such as type and concentration of the chiral selector, buffer pH and capillary temperature. Baseline enantioseparation of the analytes was achieved in 2.5 min in a fused silica capillary (50 microm i.d.; 48.5 cm total length; 8.5 cm effective length) using carboxymethyl-beta-cyclodextrin, dissolved in a background electrolyte consisting of 50 mM phosphate buffer at pH 2.5, as the chiral selector. UV detection was set at 205 nm. A careful pre-treatment of plasma samples was developed, using solid-phase extraction with hydrophilic-lipophilic balance cartridges (60 mg, 3 mL), eluting the sample with methanol, then concentrating it 37.5 times before injection. Extraction yield values are very satisfactory, being the average 89% for mirtazapine and 73% for N-desmethylmirtazapine. Application of the method to some human plasma samples has given satisfactory results.

Investigating the potential of erythromycin and derivatives as chiral selector in capillary electrophoresis

Macrocyclic antibiotics are present in an increasing number of chiral separation applications. In this study, erythromycin and some derivatives, belonging to the group of macrolide antibiotics, were investigated for their potential as chiral selector. Erythromycin A itself and five related substances namely erythromycin A N-oxide, anhydroerythromycin A, anhydroerythromycin A N-oxide, erythralosamine and erythralosamine N-oxide were included. Twenty-one chiral compounds with a wide difference in physico-chemical properties were used to test the chiral activity of the erythromycins. The chiral compounds were analysed using capillary zone electrophoresis with the erythromycins dissolved in the running buffer at different concentrations ranging from 0.1 to 10mM, with three different BGEs: sodium phosphate pHs 3.0 and 7.0 and sodium borate pH 9.2. The erythromycins showed more interactions with the acidic compounds (as observed with leucovorin, dopa, carbidopa, ketoprofen, indoprofen and warfarin) than with the neutral or weakly basic ones, especially in acidic medium. Unfortunately, no chiral separations were obtained for any of the 21 racemic mixtures. The complexation constants were calculated for the compounds showing interaction, based on the variation of electrophoretic mobility of the compounds in the presence of different concentrations of erythromycins. Finally, the size of erythromycin A was calculated using computational modelling. It was shown that the aglycone ring is only half as big as the beta-cyclodextrin cavity, giving a possible explanation for the negative response of erythromycin in this study.

Overview of the status and applications of capillary electrophoresis to the analysis of small molecules

The status of capillary electrophoresis (CE) in the analysis of small molecules is reviewed and summarised with the illustrative use of recent literature references. Examples are cited in this review which demonstrate that CE is now a recognised and established technique in many industries, law courts and government regulatory agencies. Each of the principal areas of CE application in small molecule analysis are covered in sections which highlight the recent developments and possibilities within that area. Application areas include the analysis of pharmaceuticals, agrochemicals, chiral separations, and forensics is covered. This is an update to a previous review article [J. Chromatogr. A 856 (1999) 443] and covers papers published between 1999 and 2002. Technical developments and improvements, such as the advent of capillary array instrumentation for increased sample throughput, and improved detection options are described. Overall it is concluded that CE has become a recognised and established technique in many areas and is still within a period of development of both instrumentation and application which will continue to expand usage.

Enantioseparation of imazalil residue in orange by capillary electrophoresis with 2-hydroxypropyl-beta-cyclodextrin as a chiral selector

Chiral resolution of imazalil, a fungicide, was performed by capillary electrophoresis (CE) using 2-hydroxypropyl-beta-cyclodextrin as a chiral selector. Factors affecting the chiral resolution and migration time of imazalil were studied. The optimum running conditions were found to be 5 mM ammonium dihydrogenphosphate-50 mM phosphate buffer (pH 3.0) containing 4 mM 2-hydroxypropyl-beta-cyclodextrin with an effective voltage of +25 kV at 20 degrees C using direct detection at 200 nm. Under these conditions, the resolution (Rs) of racemic imazalil was approximately 6. The extraction of imazalil from orange samples was done with acetonitrile under basic conditions. The extract was purified with a solid-phase extraction cartridge (Sep-Pak plus PS-2) and was analyzed by the above CE method. Eight orange samples were analyzed, and imazalil was detected in seven samples. In four of these seven oranges, the level of (-)-imazalil was the same as that of (+)-imazalil, but in the other three oranges, the level of (-)-imazalil was found to be lower than that of (+)-imazalil, suggesting that (-)-imazalil was degraded more quickly than (+)-imazalil in oranges.

Comprehensive strategy for chiral separations using sulfated cyclodextrins in capillary electrophoresis

This review focuses on the emerging role of sulfated cyclodextrins in the capillary electrophoretic (CE) separation of chiral analytes. Since being introduced as enantioselective agents for CE in 1995, these anionic additives have continued to demonstrate remarkable application universality. The broad spectrum of chiral compounds successfully separated using this approach includes acidic, basic, neutral, and zwitterionic species. This impressive array of analyte structures is derived from a growing diversity of compound classes including pharmaceuticals, plant extracts, biomarkers, herbicides, alkaloids, fungicides, and metal ions. Moreover, literature reports highlight the minimal optimization required to achieve a successful separation. Based on these findings, sulfated cyclodextrins appear to be well suited for the development of a more universal, comprehensive separation strategy for chiral compounds. This review explores this proposition by beginning with the structure and migration properties of sulfated cyclodextrins, using applications to highlight the separating power of this technique and ending with a pragmatic, comprehensive separation strategy.

Stereospecific determination of citalopram and desmethylcitalopram by capillary electrophoresis and liquid-phase microextraction

A chiral capillary electrophoresis (CE) system allowing simultaneous enantiomer determination of citalopram (CIT) and its pharmacologically active metabolite desmethylcitalopram (DCIT) was developed. Excellent chiral separation was obtained using 1% sulfated-beta-cyclodextrin (S-beta-CD) as chiral selector in combination with 12% ACN in 25 mM phosphate pH 2.5. Samples were prepared by liquid-phase microextraction (LPME) based on a rodlike porous polypropylene hollow fibre. CIT and DCIT were extracted from 1 ml plasma made alkaline with NaOH, into dodecyl acetate impregnated in the pores of a hollow fibre, and into 20 mM phosphate pH 2.75, inside the hollow fibre. The acceptor solution was directly compatible with the CE system. Efficient sample clean-up was seen, and the recoveries were 46 and 29% for the enantiomers of CIT and DCIT, respectively, corresponding to 31 and 19 times enrichment. The limit of quantification (S/N=10) was <11.2 ng/ml, intra-day precision was <12.8% RSD, and inter-day precision was <14.5% RSD, for all enantiomers. The validated method was successfully applied to simultaneous determination of enantiomer concentrations of CIT and DCIT in plasma samples from nine patients treated with racemic citalopram. The results confirm LPME-CE as a suitable and promising tool for enantiomeric determination of chiral drugs and metabolites in biological matrices.

Robustness testing of chiral separations by capillary electrophoresis using highly-sulfated cyclodextrins

The robustness of a generic method for chiral separation in capillary electrophoresis using highly-sulfated cyclodextrins in a low pH phosphate buffer and the "short-end injection technique" was studied. In this study, we focused on the robustness of the separations and not of the quantitative analysis of the enantiomers. The robustness was evaluated for the enantiomeric separation of a basic (propranolol), a neutral (praziquantel) and an acidic (warfarin) compound. The influence of eight factors which were believed to affect significantly the separations was studied using a 11-factor, 12-experiment Plackett-design. Statistical interpretation of the factor effects on different analytical responses (selectivity and resolution) was performed. The separations of the three compounds could be considered as rather robust as the factor effects were generally not significant (alpha = 0.05) and small.

Is capillary electrophoresis a method of choice for systematic toxicological analysis?

This review presents an overview of current research on the use of capillary electrophoretic techniques for the analysis of drugs in biological matrices. The discussion focuses on the applicability of the methods for the identification of unknown toxic compounds, which is defined as systematic toxicological analysis (STA). The aim is to establish whether or not capillary electrophoresis (CE), in one or more of its separation modes, is a method of choice in systematic toxicological analysis. To answer this question, various aspects are discussed, including sample work-up, separation modes, detection techniques, electrophoretic concentration, and identification by database retrieval. Several ways to improve the poor reproducibility and sensitivity are discussed. This leads to the conclusion that CE can be comparable to HPLC in those respects, while it is more favorable in speed, efficiency, and cost. Thus, we conclude that CE is a method of choice for STA, keeping in mind that every method has its limitations and that a combination of several non-correlated methods is always required for the identification of unknown compounds.

Medium effect (transfer activity coefficient) of methanol and acetonitrile on beta-cyclodextrin/benzoate complexation in capillary zone electrophoresis

Association constants, Kc, were derived from the electrophoretic mobilities of the anionic solutes (seven benzoates with hydroxy or chloro substituents) by capillary zone electrophoresis in different solvent systems, consisting of binary mixtures of water with up to 20% (v/v) methanol or acetonitrile, respectively. The association constants expectedly are found to decrease with increasing organic solvent concentration. The effect of organic solvents on the Kc of the benzoates with beta-cyclodextrin was analyzed applying the concept of the transfer activity coefficient (or the medium effect). This concept enables the evaluation of the significance of the contributions of the individual species involved in the complexation equilibrium in the different solvents: the benzoate ion, beta-cyclodextrin, and the anionic benzoate-beta-cyclodextrin complex. The medium effect on benzoate was calculated from the change in acidity constant of benzoic acid in the different mixed solvents and the corresponding transfer activity coefficients of the proton and the molecular acid. The transfer activity coefficients for beta-cyclodextrin results from its solubility at saturation in the different solvents. In this way, an estimation of the standard free energy of transfer, deltaG(t)0, of each species involved in the complexation equilibrium was possible for the transfer from water into the respective mixed solvent. It was found that the organic solvents do not significantly affect deltaG(t)0 for the benzoate anion. However, the organic solvents play a different role concerning the stabilization of beta-cyclodextrin and the complex anion: whereas the addition of acetonitrile has nearly no influence on deltaG(t)0 of the anionic complex, the reduction in Kc is caused by the enhanced stabilization of beta-cyclodextrin (reflected by its better solubility). Addition of methanol, on the other hand, lowers the solubility of beta-cyclodextrin, thus giving positive values for deltaG(t)0. Thus, the overall effect on Kc in methanolic solutions must be related to the pronounced destabilization of the benzoate-beta-cyclodextrin complex.

Enantioseparation of basic pharmaceutical compounds by capillary electrophoresis using sulfated cyclodextrins. Application to E-6006, a novel antidepressant

In this study, a chiral capillary electrophoresis method was optimized and validated for E-6006, a thienylpyrazolylethanamine derivative (pKa 8.9). Enantioselectivity of neutral and anionic cyclodextrins (CDs) was evaluated at acid pH (3), obtaining cathodic and anodic migration, respectively. Hydroxypropyl-beta-CD, carboxymethyl-beta-CD and sulfobutyl ether-beta-CD led to similar and partial selectivity, whereas sulfate (S)-beta-CD produced baseline separation of the enantiomers. Four types of sulfated CDs were compared considering: cavity size (alpha, beta, gamma) and random substitution versus unique derivative (S-beta-CD, 6-heptakis-S-beta-CD). Complete peak separation was obtained in all cases, but with different affinity and binding strength. Some factors that play a role in the complex formation include: position/region/degree of substitution, size of CD cavity and proportion of derivatives in mixtures. Enantioaffinity and enantioselectivity increased with the average of sulfate groups/mol. Beta cavity size complexed better, although alpha and gamma cavities did not compromise separation. 6-Heptakis-S-beta-CD had less affinity and separation efficiency, attributed to its lower degree and unique position of substitution. The method was optimized with S-beta-CD (Aldrich, randomly substituted, 7-11 groups/mol). With this selector, the effect of pH value (3-9) was evaluated. Around pH 7 the cross-over point with change in the direction and order of migration was observed, associated with great enantioselectivity and long migration times. Fine tuning was done by adjusting the CD concentration and the buffer counterion. Definitive conditions were: uncoated silica capillary, 10 mM S-beta-CD-25 mM sodium phosphate, pH 3. Validation parameters are included.

Electrophoretic enantiomer separations at high pH using the new, single-isomer octakis(2,3-dimethyl-6-O-sulfo)-gamma-cyclodextrin as chiral resolving agent

The latest, single-isomer, sulfated gamma-cyclodextrin, the sodium salt of octakis(2,3-dimethyl-6-O-sulfo)-gamma-cyclodextrin that is stable in basic media was used to separate the enantiomers of neutral, weak acid and weak base analytes by capillary electrophoresis in high pH aqueous background electrolytes. The effective mobilities and separation selectivities were found to follow trends similar to those observed earlier in acidic aqueous background electrolytes. Octakis(2,3-dimethyl-6-O-sulfo)-gamma-cyclodextrin proved to interact with all three analyte types less strongly than other single-isomer sulfated cyclodextrins do under comparable conditions.

Capillary electrophoretic separation of enantiomers in a high-pH background electrolyte by means of the single-isomer chiral resolving agent octa(6-O-sulfo)-gamma-cyclodextrin

The new, alkali-stable, single-isomer, sulfated gamma-cyclodextrin, the sodium salt of octa(6-O-sulfo)-gamma-cyclodextrin (OS) was used for the first time to separate the enantiomers of non-ionic, acidic, basic and ampholytic analytes by capillary electrophoresis in high-pH aqueous background electrolytes. The effective mobilities and separation selectivities were found to follow trends similar to those observed earlier in acidic aqueous background electrolytes. OS proved to be a broadly applicable chiral resolving agent and afforded adequate peak resolution values with short separation times for a number of non-ionic, weak acid, weak base and ampholytic analytes.

Chemiluminescence detection for a microchip capillary electrophoresis system fabricated in poly(dimethylsiloxane)

Chemiluminescence (CL) detection integrated with a microchip capillary electrophoresis (MCE) system that was fabricated in poly(dimethylsiloxane) was demonstrated for chemical and biochemical analyses. Two model CL systems were involved here: metal ion-catalyzed luminol-peroxide reaction and dansyl species conjugated peroxalate-peroxide reaction. Different strategies based on three chip patterns (cross, cross combining with Y, and cross combining with V) to perform on-line CL detection for MCE were evaluated and compared in terms of sensitivity, reproducibility, and peak symmetry. The chip pattern of cross combining with Y proved to be promising for the luminol-peroxide CL system, while the chip pattern of cross combining with V was preferred for the peroxalate-peroxide system where CL reagent could not be effectively transported by electroosmotic flow. A detection limit down to submicromolar concentrations (midattomole) was achieved with good reproducibility and symmetric peak shape. Successful separation of three metal cations such as Cr(III), Co(II), and Cu(II) and chiral recognition of dansyl phenylalanine enantiomers within 1 min revealed distinct advantages of combining MCE with CL detection for rapid and sensitive analyses.

Comparing cyclodextrin derivatives as chiral selectors for enantiomeric separation in capillary electrophoresis

A total of 26 different cyclodextrin (CD) derivatives with different functional groups and degrees of substitution were tested against 35 basic pharmaceutical compounds in an effort to investigate their effectiveness as chiral selectors for enantiomeric separation in capillary electrophoresis (CE). Testing was performed under the same conditions using a low pH buffer (25 mM phosphate buffer at pH approximately 2.5). Five CD derivatives, namely, highly sulfated-beta-CD, highly sulfated-beta-CD, hydroxypropyl-beta-CD (degree of substitution approximately 1), heptakis-(2,6-O-dimethyl)-beta-CD, and heptakis(2,3,6-O-trimethyl)-beta-CD were identified to be most effective for enantiomeric separations and have a wide range of enantiomeric selectivity towards the model compounds. Over 90% of the model compounds were enantiomerically resolved with the five identified CD derivatives, at a minimum resolution of 0.5. An additional 20 compounds were also tested to demonstrate the validity of the identified CD derivatives. The five CD derivatives were recommended as the starting chiral selectors in developing enantiomeric separation methods by CE.

Illustration of a simple and versatile scheme for reversing enantiomeric elution order and facilitating enantiomeric impurity determination in capillary electrophoresis

Determination of enantiomeric purity is most often done under overload conditions, which leads to deformed peaks. In general, the best resolutions are obtained when the small peak appears before the large peak in the electropherogram. To be able to determine the R(+)-impurity in the S(-)-form as well as the S(-)-impurity in the R(+)-form the elution orders have to be reversed. The present paper describes reversal of enantiomeric elution order for the basic analyte propranolol and the acidic analyte ibuprofen. For propranolol, a charged heptakis-(6-sulfo)-beta-cyclodextrin (CD) is used in the background electrolyte. For ibuprofen, a mix of the charged heptakis-(6-sulfo)-beta-CD and the uncharged heptakis-(2,3,6-tri-O-methyl)-beta-CD is used in the background electrolyte. The use of a coated capillary and reversal of the polarity shift the elution order, buffer composition is unchanged in both cases. The enantiomers of propranolol and ibuprofen are well separated on both the coated and uncoated capillaries. Detection limits of enantiomer impurities are investigated using spiked samples of both propranolol and ibuprofen.

Use of full-column imaging capillary isoelectric focusing for the rapid determination of the operating conditions in the preparative-scale continuous free-flow isoelectric focusing separation of enantiomers

A rapid, simple method is proposed here for the identification of the experimental conditions that lead to satisfactory preparative-scale isoelectric focusing enantiomer separations in continuous free-flow electrophoretic units. The method first calls for the use of a commercially available, full-column imaging capillary electrophoretic system to find the background electrolyte composition that generates the largest pI difference between the bands of the enantiomers. The method then calls for the finding of the minimum residence time that permits full development of the pH gradient across the separation chamber of the continuous free-flow electrophoretic unit by measuring the pH in the sample-free carrier electrolyte fractions collected during these runs. Finally, the quality of the predicted preparative-scale separation is verified by analyzing the enantiomer-containing collected fractions by capillary electrophoresis using a 14-sulfated, single-isomer cyclodextrin as resolving agent. The pI difference values and production rate values observed in this work agree well with the literature values that were obtained by much more time-consuming methods.

Applications of on-line weak affinity interactions in free solution capillary electrophoresis

The impressive selectivity offered by capillary electrophoresis can in some cases be further increased when ligands or additives that engage in weak affinity interactions with one or more of the separated analytes are added to the electrophoresis buffer. This on-line affinity capillary electrophoresis approach is feasible when the migration of complexed molecules is different from the migration of free molecules and when separation conditions are nondenaturing. In this review, we focus on applying weak interactions as tools to enhance the separation of closely related molecules, e.g., drug enantiomers and on using capillary electrophoresis to characterize such interactions quantitatively. We describe the equations for binding isotherms, illustrate how selectivity can be manipulated by varying the additive concentrations, and show how the methods may be used to estimate binding constants. On-line affinity capillary electrophoresis methods are especially valuable for enantiomeric separations and for functional characterization of the contents of biological samples that are only available in minute quantities.

Enantioseparation of vinclozolin by gamma-cyclodextrin-modified micellar electrokinetic chromatography

Cyclodextrin-modified micellar electrokinetic chromatography was applied to the enantioseparation of vinclozolin, which has been used as a fungicide and has an anti-androgenic activity, using gamma-cyclodextrin together with sodium dodecyl sulfate. Factors affecting the chiral resolution and migration time of vinclozolin were studied. The optimum running conditions were found to be 20 mM phosphate-5 mM borate buffer (pH 8.5) containing 50 mM gamma-cyclodextrin and 100 mM sodium dodecyl sulfate with an effective voltage of 20 kV at 20 degrees C using direct detection at 203 nm. Under these conditions, the resolution (Rs) of racemic vinclozolin was approximately 2.1. The sample was concentrated by solid-phase extraction and was fractionated by HPLC. The peak area ratio of (+)- and (-)-vinclozolins in wine was found to be 2:3, namely, not racemic, suggesting that degradation rates were different between (+)- and (-)-vinclozolins. The anti-androgenic activities of (+)- and (-)-vinclozolins on dihydrotestosterone-induced transcription were also investigated. The anti-androgenic activity of (+)-vinclozolin tended to be stronger than that of (-)-vinclozolin, suggesting the possibility that vinclozolin can act as an enantioselective anti-androgen.