High-Performance Polymeric Materials through Hydrogen-Bond Cross-Linking

High-Performance Liquid Metal/Polyborosiloxane Elastomer toward Thermally Conductive Applications

With the combination of high flexibility and thermal property, thermally conductive elastomers have played an important role in daily life. However, traditional thermally conductive elastomers display limited stretchability and toughness, seriously restricting their further development in practical applications. Herein, a high-performance composite is fabricated by dispersing room-temperature liquid metal microdroplets (LM) into a polyborosiloxane elastomer (PBSE). Due to the unique solid-liquid coupling mechanism, the LM can deform with the PBSE matrix, achieving higher fracture strain (401%) and fracture toughness (2164 J/m²). Meanwhile, the existence of LM microdroplets improves the thermal conductivity of the composite. Interestingly, the LM/PBSE also exhibits remarkable anti-impact, adhesion capacities under complex loading environments. As a novel stretchable elastomer with enhanced mechanical and thermal behavior, the LM/PBSE shows good application prospects in the fields of thermal camouflages, stretchable heat-dissipation matrixes, and multifunctional shells for electronic devices.

The crystal structure of ammonium (E)-4-((4-carboxyphenyl)diazenyl)benzoate, C14H13N3O4

C14H13N3O4, monoclinic, I2/a (no. 15), a = 11.4188(4) Å, b = 3.7968(2) Å, c = 30.2320(18) Å, β = 96.037(6)∘, V = 1303.44(11) Å3, Z = 4, R gt (F) = 0.0656, wR ref (F 2) = 0.2073, T = 293(2) K.

Crystal Structures of Lignocellulosic Furfuryl Biobased Polydiacetylenes with Hydrogen-Bond Networks: Influencing the Direction of Solid-State Polymerization through Modification of the Spacer Length

We present the topochemical polymerization of two lignocellulosic biobased diacetylenes (DAs) that only differ by an alkyl spacer length of 1 methylene (n = 1) or 3 methylene units (n = 3) between the diyne and carbamate functionalities. Their crystalline molecular organizations have the distinctive feature of being suitable for polymerization in two potential directions, either parallel or skewed to the hydrogen-bonded (HB) network. However, single-crystal structures of the final polydiacetylenes (PDAs) demonstrate that the resulting orientation of the conjugated backbones is different for these two derivatives, which lead to HB supramolecular polymer networks (2D nanosheets) for n = 1 and to independent linear PDA chains with intramolecular HBs for n = 3. Thus, spacer length modification can be considered a new strategy to influence the molecular orientation of conjugated polymer chains, which is crucial for developing the next generation of materials with optimal mechanical and optoelectronic properties. Calculations were performed on model oligodiacetylenes to evaluate the cooperativity effect of HBs in the different crystalline supramolecular packing motifs and the energy profile related to the torsion of the conjugated backbone of a PDA chain (i.e., its ability to adopt planar or helical conformations).

Near-Zero Hysteresis Ionic Conductive Elastomers with Long-Term Stability for Sensing Applications

Soft conductive elastomers with low hysteresis over a wide range of stretchability are desirable in various applications. Such applications include soft sensors with a long measurement range, motion recognition, and electronic skin, just to name a few. Even though the measurement capability of the sensors based on soft materials has been greatly improved compared to the traditional ones in recent years, hysteresis in the loading and unloading states has limited the applications of these sensors, thereby negatively affecting their accuracy and reliability. In this work, conductive elastomers with near-zero hysteresis have been formulated and fabricated using 3D printing. These elastomers are made by combining highly stretchable dielectric elastomer formulations with a polar hydrophobic ionic liquid and polymerizing under ultraviolet light. High-performance piezoresistive sensors have been fabricated and characterized, with a 10-fold stretchability and low hysteresis (1.2%) over long-term stability (more than 10 000 cycles under cyclic stress) with a 20 ms response time. Additionally, the current elastomers displayed fast mechanical and electrical self-healing properties. Using 3D printing in conjunction with some of our structural innovations, we have fabricated smart gloves to show this material's wide range of applications in soft robots, motion detection, wearable devices, and medical care.

Unveiling the crucial contributions of electrostatic and dispersion interactions to the ultralong room-temperature phosphorescence of H-bond crosslinked poly(vinyl alcohol) films

Organic phosphors exhibiting room-temperature phosphorescence (RTP) in the amorphous phase are promising candidates for optoelectronic and biomedical applications. In particular, noncovalently embedding organic phosphors into a poly(vinyl alcohol) (PVA) matrix has emerged as the most commonly used yet effective approach to obtain amorphous organic RTP materials. While the role of intermolecular hydrogen-bonding interactions in determining the RTP properties of doping PVA systems has been well documented, we show that electrostatic and dispersion interactions contribute crucially to the ultralong RTP properties of doping PVA films. This impressive outcome reveals the nature of non-covalent interactions existing in doping PVA systems for the first time. We demonstrate this through detailed experimental and computational studies for a series of hydrogen-bond crosslinked PVA films where star-shaped organic phosphors containing active groups of carboxy, hydroxy, and amino act as multisite crosslinkers for the construction of extensive hydrogen-bonding networks. More importantly, we successfully obtain an ultralong RTP lifetime of up to 1.74 s by tuning the electrostatic and dispersion interactions between organic phosphors and the PVA matrix through simply modifying active groups of organic phosphors. This instructive work will provide new guiding principles for the exploration of amorphous organic RTP systems.

Recent Advances of Self-Healing Polymer Materials via Supramolecular Forces for Biomedical Applications

Noncovalent interactions can maintain the three-dimensional structures of biomacromolecules (e.g., polysaccharides and proteins) and control specific recognition in biological systems. Supramolecular chemistry was gradually developed as a result, and this led to design and application of self-healing materials. Self-healing materials have attracted attention in many fields, such as coatings, bionic materials, elastomers, and flexible electronic devices. Nevertheless, self-healing materials for biomedical applications have not been comprehensively summarized, even though many reports have been focused on specific areas. In this Review, we first introduce the different categories of supramolecular forces used in preparing self-healing materials and then describe biological applications developed in the last 5 years, including antibiofouling, smart drug/protein delivery, wound healing, electronic skin, cartilage lubrication protection, and tissue engineering scaffolds. Finally, the limitations of current biomedical applications are indicated, key design points are offered for new biological self-healing materials, and potential directions for biological applications are highlighted.

Healable Strain Sensor Based on Tough and Eco-Friendly Biomimetic Supramolecular Waterborne Polyurethane

Stretchable sensors are essential for flexible electronics, which can be made with polymer elastomers as the matrix. The main challenge in producing practical devices is to obtain polymers with mechanical stability, eco-friendliness, and self-healing properties. Herein, we introduce urea bonds and 2-ureido-4[1H]-pyrimidinone (UPy) to synthesize tailored waterborne polyurethanes (WPU-UPy-x) with a hierarchical hydrogen bond (H-bond). Accordingly, sound tensile performance (strength: 53.33 MPa, toughness: 128.97 MJ m^-3), satisfying deformation recovery, and good self-healing capability of the WPU-UPy-x film are demonstrated. With atomic force microscope characterization, we find that UPy groups contribute to the highly improved microphase separation of WPU-UPy-x, responsible for good mechanical properties. As a proof of concept, a strain sensor is successfully configured, thanks to the good interfacial interactions between the polyurethane matrix and the Ti₃C₂T_x MXene conductive filler, which features sensitive and stable performance for monitoring diverse human and mechanical motions. Intriguingly, this sensor is capable of self-healing after cutting and displays well-retained sensitivity to detect the stretched signal. The as-proposed design concept for healable and sensitive strain sensors can shed light on future wearable electronics.

Hydrogen-bond-dominated mechanical stretchability in PVA films: from phenomenological to numerical insights

Hydrogen bonds (H-bonds) in poly(vinyl alcohol) (PVA) play a crucial role in macroscopic mechanical properties, particularly for stretchability. However, there is still some ambiguity about the quantitative dependence of H-bond interactions on the mechanical performance, mainly attributed to the difficulty in the discrimination of various H-bond types. Herein, small molecular chemicals as plasticizers were incorporated into the PVA matrix to tailor the H-bonding interactions. By altering the PVA molecular weight, plasticizer type and loading, both the stretchability and H-bond content were regulated on a large scale. By a combination of DMA, IR spectroscopy, MD simulation and solid-state ¹³C-NMR, every sort of H-bond in PVA was assigned, and their relative fractions were ascertained quantitatively. After correlating the elongation ratio with the relative fraction of the different types of H-bonding interaction, it was found that all the pairs of elongation vs. intermolecular H-bond content derived from different series of PVA/plasticizer films could be plotted into a master curve and exhibited good linearity, indicating that intermolecular H-bonds dominate the mechanical stretchability in PVA films. Our efforts contribute towards an in-depth understanding of performance optimization induced by H-bond manipulation from empirical, phenomenological aspects to intrinsic, numerical insights.

Transparent, self-recoverable, highly tough, puncture and tear resistant polyurethane supramolecular elastomer with fast self-healing capacity via "hard-soft" hard domain design

The integration of superior mechanical properties and fast healing efficiency for self-healing polyurethane supramolecular elastomers is challenging due to the confliction between high chain mobility for healing and high chain rigidity for mechanical properties. Herein, a strategy to design a "hard-soft" hard domain by the cooperation of quadruple hydrogen bonds (HBs) in the mainchain as restriction units and single HBs in the side chain as diffusion units is reported. The resulting transparent supramolecular elastomer exhibited fast self-recoverability, good puncture resistance and superior mechanical properties with a tensile strength of 20.5 MPa, an extensibility of 2043.7%, a toughness of 146.1 MJ m-3 and a tear resistance of 13.8 kJ m-2. Moreover, the fast self-healing capacity (healing efficiency > 82% within 3 h under moderate condition) was realized due to the soft effects of weak HBs in the side chain on the strong HBs in the mainchain. Taking advantage of the merits of the supramolecular elastomer, a flexible sensor was simply fabricated, which showed good self-repairable and stable sensing properties. Thus, the elastomer has great potential in the field of flexible electronics and wearable devices.

Facile strategy to incorporate amidoxime groups into elastomers toward self-crosslinking and self-reinforcement

Amidoxime modification of NBR and the formation of a multi-crosslinking network structure by self-crosslinking of AO-NBR.

Interpenetrated triple network polymers: synergies of three different dynamic bonds

Triply interpenetrated networks were made with a unique dynamic linker in each network. The linkers were hydrogen bonds, boronic esters and Diels–Alder adducts. Triply dynamic materials had superior properties compared to doubly dynamic analogues.

Recent Advances in High-strength and High-toughness Polyurethanes Based on Supramolecular Interactions

Recent developments in supramolecular chemistry have generated increasing interest in supramolecular polymers and opened a window for the exploitation of various supramolecular polymeric materials and their multifunctional composites. High-performance polyurethanes,...

Acid-Resistance and Self-Repairing Supramolecular Nanoparticle Membranes via Hydrogen-Bonding for Sustainable Molecules Separation

Functional membranes generally wear out when applying in harsh conditions such as a strong acidic environment. In this work, high acid-resistance, long-lasting, and low-cost functional membranes are prepared from engineered hydrogen-bonding and pH-responsive supramolecular nanoparticle materials. As a proof of concept, the prepared membranes for dehydration of alcohols are utilized. The synthesized membranes have achieved a separation factor of 3000 when changing the feed solution pH from 7 to 1. No previous reports have demonstrated such unprecedentedly high-record separation performance (pervaporation separation index is around 1.1 × 107  g m-2  h-1 ). More importantly, the engineered smart membrane possesses fast self-repairing ability (48 h) that is inherited from the dynamic hydrogen bonds between the hydroxyl groups of polyacrylic acid and carbonyl groups of polyvinylpyrrolidone. To this end, the designed supramolecular materials offer the membrane community a new material type for preparing high acid resistance and long-lasting membranes for harsh environmental cleaning applications.

Dynamic Nanoconfinement Enabled Highly Stretchable and Supratough Polymeric Materials with Desirable Healability and Biocompatibility

Lightweight polymeric materials are highly attractive platforms for many potential industrial applications in aerospace, soft robots, and biological engineering fields. For these real-world applications, it is vital for them to exhibit a desirable combination of great toughness, large ductility, and high strength together with desired healability and biocompatibility. However, existing material design strategies usually fail to achieve such a performance portfolio owing to their different and even mutually exclusive governing mechanisms. To overcome these hurdles, herein, for the first time a dynamic hydrogen-bonded nanoconfinement concept is proposed, and the design of highly stretchable and supratough biocompatible poly(vinyl alcohol) (PVA) with well-dispersed dynamic nanoconfinement phases induced by hydrogen-bond (H-bond) crosslinking is demonstrated. Because of H-bond crosslinking and dynamic nanoconfinement, the as-prepared PVA nanocomposite film exhibits a world-record toughness of 425 ± 31 MJ m-3 in combination with a tensile strength of 98 MPa and a large break strain of 550%, representing the best of its kind and even outperforming most natural and artificial materials. In addition, the final polymer exhibits a good self-healing ability and biocompatibility. This work affords new opportunities for creating mechanically robust, healable, and biocompatible polymeric materials, which hold great promise for applications, such as soft robots and artificial ligaments.

An autonomously ultrafast self-healing, highly colourless, tear-resistant and compliant elastomer tailored for transparent electromagnetic interference shielding films integrated in flexible and optical electronics

Considering the operation reliability of flexible and optical electronics (FOEs) in dynamic and real-world environments, autonomous self-healing electromagnetic interference (EMI) shielding materials with high transparency, good stretchability and excellent tear-resistance are urgently required but always difficult to achieve due to the poor dynamics of their elastic substrates. Herein, we propose a facile strategy to design a highly dynamic polyurea elastomer (PDMS-MPI-HDI) featuring with ultrahigh optical transparency (>94%), ultralow elastic modulus (<1 MPa), high tear-resistant stretchability (800%), and ultrafast autonomous self-healing (100 s for scratch-healing). Taking PDMS-MPI-HDI as a substrate for embedding silver nanowires (Ag NWs), the first transparent, stretchable and self-healable EMI shielding materials (Ag NWs/PDMS-MPI-HDI) are presented. Failure behavior of Ag NWs/PDMS-MPI-HDI is highly tolerant of prefabricated cracks under deformation. Due to the robust interfacial adhesion between Ag NWs and PDMS-MPI-HDI, the fractured Ag NW network can autonomously self-reconstruct during the healing process of PDMS-MPI-HDI substrates, contributing to the complete restoration of EMI shielding effectiveness (SE) and full erasure of scratches at both the resting and stretching states. Besides, Ag NWs/PDMS-MPI-HDI exhibits fast autonomous self-healing at high (60 °C) and low (0 °C) temperatures, and in artificial sweat, which is essential for FOEs applicable in various practical environments.

Self-Stabilized Supramolecular Assemblies Constructed from PEGylated Dendritic Peptide Conjugate for Augmenting Tumor Retention and Therapy

Supramolecular self-assemblies of dendritic peptides with well-organized nanostructures have great potential as multifunctional biomaterials, yet the complex self-assembly mechanism hampers their wide exploration. Herein, a self-stabilized supramolecular assembly (SSA) constructed from a PEGylated dendritic peptide conjugate (PEG-dendritic peptide-pyropheophorbide a, PDPP), for augmenting tumor retention and therapy, is reported. The supramolecular self-assembly process of PDPP is concentration-dependent with multiple morphologies. By tailoring the concentration of PDPP, the supramolecular self-assembly is driven by noncovalent interactions to form a variety of SSAs (unimolecular micelles, oligomeric aggregates, and multi-aggregates) with different sizes from nanometer to micrometer. SSAs at 100 nm with a spherical shape possess extremely high stability to prolong blood circulation about 4.8-fold higher than pyropheophorbide a (Ppa), and enhance tumor retention about eight-fold higher than Ppa on day 5 after injection, which leads to greatly boosting the in vivo photodynamic therapeutic efficiency. RNA-seq demonstrates that these effects of SSAs are related to the inhibition of MET-PI3K-Akt pathway. Overall, the supramolecular self-assembly mechanism for the synthetic PEGylated dendritic peptide conjugate sheds new light on the development of supramolecular assemblies for tumor therapy.

Tuning the dynamic fragility of acrylic polymers by small molecules: the interplay of molecular structures

This report studied changes in the dynamic fragility (m) of poly(butyl methacrylate) (PBMA) by introducing guest hindered phenols capable of forming two or three intermolecular hydrogen bonds (inter-HBs) per molecule with the host polymer. The small molecules effectively decrease the m value, even if they apparently increase the glass transition temperature (T_g) of mixtures. The reduction in m was confirmed by enthalpy relaxation in two aspects: adding the guest molecule leads to a stronger cooling rate dependence of the limiting fictive temperature together with an apparent increase in aging rate of PBMA hybrids at low concentrations. By varying the molecule size and steric hindrance of the hydroxyl group on the hindered phenols, we clarified that m is primarily governed by the strength of inter-HB interactions, while the T_g value of mixtures depends on a combined effect of additive bulkiness and HB interaction. The anomalous dynamics was further rationalized not only by the HB-induced flexibility balance between side groups and backbone, but also by the reduction of cooperative rearranging sizes and alleviation of long-chain connectivity in such HB-driven hybrids.

"Green" Flexible Electronics: Biodegradable and Mechanically Strong Soy Protein-Based Nanocomposite Films for Human Motion Monitoring

Soy protein isolate (SPI) is envisioned as a promising alternative to fabricate "green" flexible electronics, showing great potential in the field of flexible wearable electronics. However, it is challenging to simultaneously achieve conductive film-based human motion-monitoring strain sensors with reliable fatigue resistance, robust mechanical property, environmental degradability, and sensing capability of human motions. Herein, we prepared a series of SPI-based nanocomposite films by embedding a surface-hydroxylated high-dielectric constant inorganic filler, BaTiO3, (HBT) as interspersed nanoparticles into a biodegradable SPI substrate. In particular, the fabricated film comprising 0.5 wt % HBT and glycerin (GL), namely, SPI-HBT0.5-GL0.5, presents multifunctional properties, including a combination of excellent toughness, tensile strength, conductivity, translucence, recyclability, and excellent thermal stability. Meanwhile, this multifunctional film could be simply degraded in phosphate buffered saline solution and does not cause any pollution to the environment. Attractively, wearable sensors prepared with this particular material (SPI-HBT0.5-GL0.5) displayed excellent biocompatibility, prevented the occurrence of an immune response, and could accurately monitor various types of human joint motions and successfully remain operable after 10,000 cycles. These properties make the developed SPI-based film a great candidate in formulating biobased and multifunctional wearable electronics.

Molecular engineering of a colorless, extremely tough, superiorly self-recoverable, and healable poly(urethane-urea) elastomer for impact-resistant applications

Polyurethane or polyurea elastomers with superb mechanical strength and toughness, good self-recoverability and healable characteristics are of key significance for practical applications. However, some mutually exclusive conflicts among these properties make it challenging to optimize them simultaneously. Herein, we report a facile strategy to fabricate a colorless healable poly(urethane-urea) elastomer with the highest reported mechanical toughness and recoverable energy dissipation capability (503.3 MJ m^-3 and 37.3 MJ m^-3 recovered after 7× stretching). These results were achieved via implanting a large number of irregularly arranged urea H-bonds into units of hard domains of weak and soft, self-healing polymer, which led to a dramatic increase in the Young's modulus, tensile strength, toughness, and fracture energy, while maintaining dynamic adaptiveness and responsiveness. Similar to other external stimuli, such as heat, light, or electricity, etc., trace solvent is capable of dissociating noncovalent crosslinks, promoting the mobility of polymer chains surrounding the fracture surface, and thus endowing the elastomer with healability. Impressively, this elastomer possessed outstanding impact-resistance and energy-absorbing ability, even under relatively high temperature. Moreover, it recovered this functionality even after severe deformation or accidental mechanical damage.

CdSe 1D/2D Mixed-Dimensional Heterostructures: Curvature-Complementary Self-Assembly for Enhanced Visible-Light Photocatalysis

Mixed-dimensional heterostructures (MDHs), which combine nanomaterials of different dimensionalities deliver on the promise to bypass intrinsic limitations of a given low-dimensional material. Here, a strategy to engineer MDHs between two low-dimensional materials by curvature-complementary self-assembly is described. CdSe nanotubes rolled from 2D nanosheets and 1D CdSe nanorods, with negative and positive curvatures, respectively, are selected to illustrate complementary curvature self-assembly. The assembly process, optical, and photoelectrical properties of the CdSe MDHs are thoroughly investigated. Several remarkable features of CdSe MDHs, including increased light absorption, efficient charge separation, and appropriate bandgap structure are confirmed. The MDHs significantly alleviate the sluggish kinetics of electron transfer in the quantum sized CdSe subunits (onset potential of 0.21 V vs RHE for MDHs; 0.4 V lower than their low-dimensional building blocks), while the spatial nano-confinement effect in the CdSe MDHs also assists the interfacial reaction kinetics to render them ideal photocatalysts for benzylamine oxidation (conversion > 99% in 4 h with a two times higher rate than simple mixtures). The results highlight opportunities for building MDHs from low-dimensional building blocks with curvature-complementary features and expand the application spectrum of low dimensional materials in artificial photosynthesis.

Self-Assembly of Nitrogen-Rich Heterocyclic Compounds with Oxidants for the Development of High-Energy Materials

The development of energetic materials with high energy and low sensitivity has attracted immense interests due to their widespread applications in aerospace technology and national defense. In this work, a promising self-assembly strategy was developed to prepare three high-energy materials (1-3) through the introduction of oxidant molecules into the crystal voids of the parent materials. The structures of these new materials were comprehensively examined by infrared spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and single-crystal X-ray diffraction. In these materials, three unique layer structures with hcb, sql, and interrupted sql topologies were observed, which were formed by the fused-ring-based energetic components. Windows with hexagonal, square, and rectangular structures were observed within these layer structures, which were occupied by H₂O₂, NO₃^-, and ClO₄^-, respectively. Oxidant molecules interacted with parent molecules via hydrogen bonds to form crystal structures of these materials. Moreover, the energetic property of these materials was estimated by computing methods. The calculation results revealed that these self-assembly materials exhibit excellent energetic properties. The highest energetic performance was observed for compound 3. The detonation velocity, detonation pressure, and specific impulse values were up to 9339 m·s^-1, 42.5 GPa, and 308 s, respectively, which were greater than those of HMX. Furthermore, these materials exhibited good sensitivity, which was closely related to their unique crystal structures. The high performance of these materials indicated that the self-assembly strategy should be a promising method for the development of novel energetic materials.

Simultaneously Toughening and Stiffening Elastomers with Octuple Hydrogen Bonding

Current synthetic elastomers suffer from the well-known trade-off between toughness and stiffness. By a combination of multiscale experiments and atomistic simulations, a transparent unfilled elastomer with simultaneously enhanced toughness and stiffness is demonstrated. The designed elastomer comprises homogeneous networks with ultrastrong, reversible, and sacrificial octuple hydrogen bonding (HB), which evenly distribute the stress to each polymer chain during loading, thus enhancing stretchability and delaying fracture. Strong HBs and corresponding nanodomains enhance the stiffness by restricting the network mobility, and at the same time improve the toughness by dissipating energy during the transformation between different configurations. In addition, the stiffness mismatch between the hard HB domain and the soft poly(dimethylsiloxane)-rich phase promotes crack deflection and branching, which can further dissipate energy and alleviate local stress. These cooperative mechanisms endow the elastomer with both high fracture toughness (17016 J m^-2 ) and high Young's modulus (14.7 MPa), circumventing the trade-off between toughness and stiffness. This work is expected to impact many fields of engineering requiring elastomers with unprecedented mechanical performance.

Materials Design and Optimization for Next-Generation Solar Cell and Light-Emitting Technologies

We review some of the most potent directions in the design of materials for next-generation solar cell and light-emitting technologies that go beyond traditional solid-state inorganic semiconductor-based devices, from both the experimental and computational standpoints. We focus on selected recent conceptual advances in tackling issues which are expected to significantly impact applied literature in the coming years. Specifically, we consider solution processability, design of dopant-free charge transport materials, two-dimensional conjugated polymeric semiconductors, and colloidal quantum dot assemblies in the fields of experimental synthesis, characterization, and device fabrication. Key modeling issues that we consider are calculations of optical properties and of effects of aggregation, including recent advances in methods beyond linear-response time-dependent density functional theory and recent insights into the effects of correlation when going beyond the single-particle ansatz as well as in the context of modeling of thermally activated fluorescence.

Biomimetic high performance artificial muscle built on sacrificial coordination network and mechanical training process

Artificial muscle materials promise incredible applications in actuators, robotics and medical apparatus, yet the ability to mimic the full characteristics of skeletal muscles into synthetic materials remains a huge challenge. Herein, inspired by the dynamic sacrificial bonds in biomaterials and the self-strengthening of skeletal muscles by physical exercise, high performance artificial muscle material is prepared by rearrangement of sacrificial coordination bonds in the polyolefin elastomer via a repetitive mechanical training process. Biomass lignin is incorporated as a green reinforcer for the construction of interfacial coordination bonds. The prepared artificial muscle material exhibits high actuation strain (>40%), high actuation stress (1.5 MPa) which can lift more than 10,000 times its own weight with 30% strain, characteristics of excellent self-strengthening by mechanical training, strain-adaptive stiffening, and heat/electric programmable actuation performance. In this work, we show a facile strategy for the fabrication of intelligent materials using easily available raw materials.

Unexpected organic hydrate luminogens in the solid state

Developing organic photoluminescent materials with high emission efficiencies in the solid state under a water atmosphere is important for practical applications. Herein, we report the formation of both intra- and intermolecular hydrogen bonds in three tautomerizable Schiff-base molecules which comprise active hydrogen atoms that act as proton donors and acceptors, simultaneously hindering emission properties. The intercalation of water molecules into their crystal lattices leads to structural rearrangement and organic hydrate luminogen formation in the crystalline phase, triggering significantly enhanced fluorescence emission. By suppressing hydrogen atom shuttling between two nitrogen atoms in the benzimidazole ring, water molecules act as hydrogen bond donors to alter the electronic transition of the molecular keto form from nπ* to lower-energy ππ* in the excited state, leading to enhancing emission from the keto form. Furthermore, the keto-state emission can be enhanced using deuterium oxide (D₂O) owing to isotope effects, providing a new opportunity for detecting and quantifying D₂O.

Developing organic photoluminescent materials with high emission efficiencies in the solid state under a water atmosphere is important for practical applications. Here, the authors report the formation of intra- and intermolecular hydrogen bonds in a tautomerizable Schiff base and intercalation of water in the crystal lattice leading to a luminescent organic hydrate.

Hydrogen Bonding in Self-Healing Elastomers

In the past decade, the self-healing elastomers based on multiple hydrogen bonding have attracted ample attention due to their rich chemical structures, adjustable mechanical properties, fast healing speed, and high healing efficiency. Through prolonging the service life and fast recovery of the mechanical properties, self-healing elastomers can be potentially applied in the field of wearable electronics, electronic skins, motion tracking, and health monitoring. In this perspective, we will introduce the concept and classification of self-healing materials first, then the hydrogen bonds, and the corresponding position of hydrogen-bonding units in the polymer structures. We will also conclude the potential application of hydrogen bonding-based elastomers. Finally, a summary and outlook will be provided.

A combined experimental and molecular dynamics simulation study of an intrinsic self-healing polyurethane elastomer based on a dynamic non-covalent mechanism

An intrinsic self-healing polyurethane (PU) elastomer with excellent self-healing efficiency was prepared. The self-healing properties of this elastomer as well as the temperature dependence of self-healing can be tailored by regulating the molar ratio of hard to soft segments. The self-healing efficiency of 92.5% is the highest when the molar ratio of 4,4-methylenedicyclohexyl diisocyanate (HMDI) to polypropylene carbonate polyol (PPC) is 1.3 and the temperature is 25 °C. In situ temperature swing infrared spectra and low-field nuclear magnetic resonance reveal that the soft segment, PPC, endows PU with a dense dynamic hydrogen bond network, and the dissociation and reconstruction of the hydrogen bond network enable the PU to heal. To date, the exchange of hydrogen bonds has not been observed intuitively through experimental means. Therefore, the number, type, strength, lifetime, and the exchange of hydrogen bonds in the self-healing process at different temperatures were investigated by molecular dynamics (MD) simulation. The simulated results show that the type of hydrogen bond exchange between functional groups will be affected by temperature. The hydrogen bonds between urethane and urea groups play a leading role in the self-healing properties due to the high strength and a large number of hydrogen bonds at both 25 and 50 °C. The stronger strength, longer lifetime, and greater number of effective hydrogen bonds at 25 °C make the self-healing efficiency of PU higher than at 50 °C.

Reusable Hyperbranched Polyethylenimine-Functionalized Ethyl Cellulose Film for the Removal of Phosphate with Easy Separation

The design of a reusable film adsorbent with easy solid-liquid separation for the removal of phosphate is necessary and significant but remains hugely challenging. Herein, the hyperbranched polyethylenimine-functionalized ethyl cellulose (HPEI-EC) film was successfully synthesized by a one-step solution-casting method. The structure and elemental composition of the HPEI-EC film were characterized by Fourier transform-infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. The phosphate adsorption capacity of the HPEI-EC film was 15.53 mg g-1, which is 12 times higher than that of EC. Significantly, the elongation at break of the HPEI-EC film was 13.43%, which is higher than that of the EC film (8.9%), and the HPEI-EC film had a considerable tensile strength of 13.21 MPa. Such good mechanical properties of the HPEI-EC film bring about the advantage of the saturated HPEI-EC film, allowing it to be easily taken out using a pair of tweezers, which significantly reduces the operation time and saves the cost in the application process. Furthermore, the HPEI-EC film possessed good reusability, and 71.6% of the original adsorption capacity of phosphate was retained even after five cycles. Moreover, the electrostatic interaction between protonated the amine group (-NH3 +) and the phosphate ion (PO4 3-) is mainly responsible for the adsorption process. This study presents a low-cost and reusable film adsorbent for the effective removal of phosphate from water and provides an easy solid-liquid separation method for use in the adsorption field.

Towards photoswitchable quadruple hydrogen bonds via a reversible "photolocking" strategy for photocontrolled self-assembly

Developing new photoswitchable noncovalent interaction motifs with controllable bonding affinity is crucial for the construction of photoresponsive supramolecular systems and materials. Here we describe a unique "photolocking" strategy for realizing photoswitchable control of quadruple hydrogen-bonding interactions on the basis of modifying the ureidopyrimidinone (UPy) module with an ortho-ester substituted azobenzene unit as the "photo-lock". Upon light irradiation, the obtained Azo-UPy motif is capable of unlocking/locking the partial H-bonding sites of the UPy unit, leading to photoswitching between homo- and heteroquadruple hydrogen-bonded dimers, which has been further applied for the fabrication of novel tunable hydrogen bonded supramolecular systems. This "photolocking" strategy appears to be broadly applicable in the rational design and construction of other H-bonding motifs with sufficiently photoswitchable noncovalent interactions.

Tetrel Bonding Interactions Involving Carbon at Work: Recent Advances in Crystal Engineering and Catalysis

The σ- and π-hole interactions are used to define attractive forces involving elements of groups 12–18 of the periodic table acting as Lewis acids and any electron rich site (Lewis base, anion, and π-system). When the electrophilic atom belongs to group 14, the resulting interaction is termed a tetrel bond. In the first part of this feature paper, tetrel bonds formed in crystalline solids involving sp3-hybridized carbon atom are described and discussed by using selected structures retrieved from the Cambridge Structural Database. The interaction is characterized by a strong directionality (close to linearity) due to the small size of the σ-hole in the C-atom opposite the covalently bonded electron withdrawing group. The second part describes the utilization of two allotropic forms of carbon (C60 and carbon nanotubes) as supramolecular catalysts based on anion–π interactions (π-hole tetrel bonding). This part emphasizes that the π-hole, which is considerably more accessible by nucleophiles than the σ-hole, can be conveniently used in supramolecular catalysis.