PEGylated inorganic nanoparticles

Insights into the Cellular Uptake, Cytotoxicity, and Cellular Death Modality of Phospholipid-Coated Gold Nanorods toward Breast Cancer Cell Lines

Gold nanorods (GNRs) have gained pronounced recognition in the diagnosis and treatment of cancers driven by their distinctive properties. Herein, a gold-based nanosystem was prepared by utilizing a phospholipid moiety linked to thiolated polyethylene glycol, 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-PEG-SH, as a surface decorating agent. The synthesized phospholipid-PEG-GNRs displayed good colloidal stability upon exposure to the tissue culture medium. Cytotoxicity of phospholipid-PEG-GNRs was investigated toward MCF-7 and T47D breast cancer cells using sulforhodamine B test. The results revealed that phospholipid-PEG-GNRs demonstrated  high cytotoxicity to MCF-7 cells compared to T47D cells, and minimal cytotoxicity to human dermal fibroblasts. The cellular uptake studies performed by imaging and quantitative analysis demonstrated  massive internalization of phospholipid-coated GNRs into  MCF-7 cells in comparison to T47D cells. The cellular death modality of cancer cells after treatment with phospholipid-PEG-GNRs was evaluated using mitochondrial membrane potential assay (JC-1 dye), gene expression analysis, and flow cytometry study. The overall results suggest that phospholipid-modified GNRs enhanced mainly the cellular apoptotic events in MCF-7 cells in addition to necrosis, whereas cellular necrosis and suppression of cellular invasion contributed to the cellular death modality in the T47D cell line upon treatment with phospholipid-PEG-GNRs. The phospholipid-coated GNRs interact in a different manner with breast cancer cell lines and could be considered for breast cancer treatment.

Cross-Linked Polystyrene Shells Grown on Iron Oxide Nanoparticles via Surface-Grafted AGET-ATRP in Microemulsion

Most applications of nanoparticles require robust stabilization, for example, by surface-bound ligands or the encapsulation within polymer shells. Furthermore, for biomedical applications, the particles must be dispersible in a complex biological environment. Thus, high-quality nanoparticles synthesized in organic solvents must be transferred into aqueous media. Here, we present a novel scalable method enabling the robust hydrophilic encapsulation of non-agglomerated nanoparticles by growing polystyrene shells via AGET-ATRP in microemulsion. To demonstrate this approach, we encapsulate iron oxide nanoparticles (diameter: 13.7 ± 0.6 nm). Because the ATRP initiator is grafted onto the nanoparticles' surface, the shells are covalently attached to the iron oxide cores. By varying the amount of monomers, the shell thickness can be adjusted precisely, as indicated by the increasing hydrodynamic size from ∼22 to 26 nm (DLS, number mean) with an increasing amount of added monomers. Moreover, the degree of cross-linking can be controlled by the amount of added divinylbenzene (DVB). To evaluate the robustness of the polymer shells against ion infusion, we introduce a novel colorimetric method, which is based on the formation of the red iron thiocyanate complex. After addition of HCl, the increase in absorbance at 468 nm indicates leaching of iron ions from the polymer-encapsulated core particles. These measurements confirm that with increasing shell thickness, significantly improved shielding is achieved. Furthermore, high concentrations of added DVB [33-50% (v/v) in a monomer mixture] improve the shielding effect. However, when smaller amounts of DVB were added [10-25% (v/v)], the shielding effect was diminished, even in comparison to non-cross-linked polymer shells. This finding suggests a higher porosity of shells with a low degree of cross-linking.

Microwave-assisted and one-step synthesis of PEG passivated fluorescent carbon dots from gelatin as an efficient nanocarrier for methotrexate delivery

A green and simple process for preparing the polyethylene glycol passivated fluorescent carbon dots (CDs-PEG) have been studied by a microwave pyrolysis method, using gelatin and PEG as starting materials. This method is very effective for development of carbon-based quantum dots from gelatin with high quantum yield (QY). The synthesized CDs-PEG were found to emit blue photoluminescence (PL) with a maximum QY of 34%. At the following research, we investigated the effect of the presence of PEG on PL intensity, and the result showed that CDs-PEG becomes stronger PL properties than pure CDs from gelatin. The synthesized CDs-PEG were characterized by FTIR, TEM, UV-vis, PL, zeta potential and XRD analyses. The anticancer performance of developed CDs-PEG was evaluated by in vitro tests such as MTT assay and fluorescence microscopy analyses. The examination of CDs-PEG as an anti-cancer drug nanocarrier for methotrexate (MTX) illustrated a better antitumor efficacy than free MTX due to its enhanced nuclear delivery in vitro, which resulting in highly effective tumour growth inhibition and improving targeted cancer therapy in clinical medicine.

Silver-Based Plasmonic Nanoparticles for and Their Use in Biosensing

The localized surface plasmon resonance (LSPR) property of metallic nanoparticles is widely exploited for chemical and biological sensing. Selective biosensing of molecules using functionalized nanoparticles has become a major research interdisciplinary area between chemistry, biology and material science. Noble metals, especially gold (Au) and silver (Ag) nanoparticles, exhibit unique and tunable plasmonic properties; the control over these metal nanostructures size and shape allows manipulating their LSPR and their response to the local environment. In this review, we will focus on Ag-based nanoparticles, a metal that has probably played the most important role in the development of the latest plasmonic applications, owing to its unique properties. We will first browse the methods for AgNPs synthesis allowing for controlled size, uniformity and shape. Ag-based biosensing is often performed with coated particles; therefore, in a second part, we will explore various coating strategies (organics, polymers, and inorganics) and their influence on coated-AgNPs properties. The third part will be devoted to the combination of gold and silver for plasmonic biosensing, in particular the use of mixed Ag and AuNPs, i.e., AgAu alloys or Ag-Au core@shell nanoparticles will be outlined. In the last part, selected examples of Ag and AgAu-based plasmonic biosensors will be presented.

Effect of structure levels on surface-enhanced Raman scattering of human telomeric G-quadruplexes in diluted and crowded media

Human telomeric G-quadruplexes are emerging targets in anticancer drug discovery since they are able to efficiently inhibit telomerase, an enzyme which is greatly involved in telomere instability and immortalization process in malignant cells. G-quadruplex (G4) DNA is highly polymorphic and can adopt different topologies upon addition of electrolytes, additives, and ligands. The study of G-quadruplex forms under various conditions, however, might be quite challenging. In this work, surface-enhanced Raman scattering (SERS) spectroscopy has been applied to study G-quadruplexes formed by human telomeric sequences, d[A₃G₃(TTAGGG)₃A₂] (Tel26) and d[(TTAGGG)₄T₂] (wtTel26), under dilute and crowding conditions. The SERS spectra distinctive of hybrid-1 and hybrid-2 G-quadruplexes of Tel26 and wtTel26, respectively, were observed for the sequences folded in the presence of K⁺ ions (110 mM) in a buffered solution, representing the diluted medium. Polyethylene glycol (5, 10, 15, 20, and 40% v/v PEG) was used to create a molecular-crowded environment, resulting in the formation of the parallel G-quadruplexes of both studied human telomeric sequences. Despite extensive overlap by the crowding agent bands, the SERS spectral features indicative of parallel G4 form of Tel26 were recognized. The obtained results implied that SERS of G-quadruplexes reflected not only the primary structure of the studied human telomeric sequence, including its nucleobase composition and sequence, but also its secondary structure in the sense of Hoogsteen hydrogen bonds responsible for the guanine tetrad formation, and finally its tertiary structure, defining a three-dimensional DNA shape, positioned close to the enhancing metallic surface. Graphical abstract.

Preferential Accumulation of Phospholipid-PEG and Cholesterol-PEG Decorated Gold Nanorods into Human Skin Layers and Their Photothermal-Based Antibacterial Activity

Herein, a library of gold nanorods (GNR) decorated with polyethylene glycol-thiol (PEG-SH) containing different functionalities were synthesized and characterized by optical absorption spectroscopy, zeta potential, dynamic light scattering (DLS), transmission electron microscope (TEM) and proton nuclear magnetic resonance (1H-NMR). The colloidal stability of GNR when exposed to skin, and their preferential accumulation into excised human skin layers were investigated. Confocal laser scanning microscopy, transmission electron microscope (TEM) and inductively coupled plasma-optical emission spectroscopy (ICP-OES) were utilized to track the penetration of GNR into different skin layers. The results demonstrated that cholesterol-PEG coated GNR were preferentially loaded up in the upper layers of skin (stratum corneum), while phospholipid-PEG coated counterparts were drastically deposited in skin dermis. Neutral methoxy-PEG-coated GNR were distributed in both SC and dermis skin layers, while charged GNR (anionic-carboxylic acid-PEG-GNR and cationic-amine-PEG-GNR) revealed a minimal accumulation into skin. DSPE-PEG-GNR and Chol-PEG-GNR demonstrated antibacterial activities against Staphylococcus aureus (S aureus) at MIC values of 0.011 nM and 0.75 nM, respectively. Photothermal treatment for S. aureus at sub-MIC concentrations resulted in a significant bactericidal effect when using Chol-PEG-GNR but not DSPE-PEG-GNR. Gold-based nanoscale systems have great value as a promising platform for skin diseases therapy.

One-Step Preparation Method of Flexible Metafilms on the Water-Oil Interface: Self-Assembly Surface Plasmon Structures for Surface-Enhanced Raman Scattering Detection

The present study demonstrated a one-step method for the first time to fabricate self-assembled gold nanoparticle (AuNP) metafilms at the water-toluene interface by adding polystyrene-polyisoprene-polystyrene as the support layer. The thiolated polyethylene glycol and ethanol were used to tune the surface charge density on the AuNPs, constructing a balanced situation at the water-toluene interface. The flexible (AuNP) metafilm can be easily obtained after evaporation of the toluene phase and further used as a surface-enhanced Raman scattering (SERS) substrate for trace thiram detection. The SERS sensitivity was tested using standard Raman probes such as crystal violet and malachite green, both with the detect concentration reaching 1 × 10^-11 M. Moreover, the excellent reproducibility and elastic properties make the metafilm promising in practical detection. Hence, the trace thiram detection on an orange pericarp was inspected with the detection limit of 0.5 ppm (1 × 10^-6 M) as well as a favorable linearity relation with a correlation coefficient of 0.979, exactly matching the realistic application requirements.

The Role of Ligands in the Chemical Synthesis and Applications of Inorganic Nanoparticles

The design of nanoparticles is critical for their efficient use in many applications ranging from biomedicine to sensing and energy. While shape and size are responsible for the properties of the inorganic nanoparticle core, the choice of ligands is of utmost importance for the colloidal stability and function of the nanoparticles. Moreover, the selection of ligands employed in nanoparticle synthesis can determine their final size and shape. Ligands added after nanoparticle synthesis infer both new properties as well as provide enhanced colloidal stability. In this article, we provide a comprehensive review on the role of the ligands with respect to the nanoparticle morphology, stability, and function. We analyze the interaction of nanoparticle surface and ligands with different chemical groups, the types of bonding, the final dispersibility of ligand-coated nanoparticles in complex media, their reactivity, and their performance in biomedicine, photodetectors, photovoltaic devices, light-emitting devices, sensors, memory devices, thermoelectric applications, and catalysis.

Functional, Degradable Zwitterionic Polyphosphoesters as Biocompatible Coating Materials for Metal Nanostructures

A zwitterionic polyphosphoester (zPPE), specifically l-cysteine-functionalized poly(but-3-yn-1-yloxy)-2-oxo-1,3,2-dioxaphospholane (zPBYP), has been developed as a poly(ethylene glycol) (PEG) alternative coating material for gold nanoparticles (AuNPs), the most extensively investigated metal nanoparticulate platform toward molecular imaging, photothermal therapy, and drug delivery applications. Thiol-yne conjugation of cysteine transformed an initial azido-terminated and alkynyl-functionalized PBYP homopolymer into zPBYP, offering hydrolytic degradability, biocompatibility, and versatile reactive moieties for installation of a range of functional groups. Despite minor degradation during purification, zPPEs were able to stabilize AuNPs presumably through multivalent interactions between combinations of the side chain zwitterions (thioether and phosphoester groups of the zPPEs with the AuNPs). ³¹P NMR studies in D₂O revealed ca. 20% hydrolysis of the phosphoester moieties of the repeat units had occurred during the workup and purification by aqueous dialysis at pH 3 over ca. 1 d, as observed by the ³¹P signal of the phosphotriesters resonating at ca. -0.5 to -1.7 shifting downfield to ca. 1.1 to -0.4 ppm, attributed to transformation to phosphates. Further hydrolysis of side chain and backbone units proceeded to an extent of ca. 75% over the next 2 d in nanopure water (pH 5-6). The NMR degradation results were consistent with the broadening and red-shift of the surface plasmon resonance (SPR) observed by UV-vis spectroscopy of the zPPE-coated AuNPs in water over time. All AuNP formulations in this study, including those with citrate, PEG, and zPPE coatings, exhibited negligible immunotoxicity, as determined by cytokine overexpression in the presence of the nanostructures relative to those in cell culture medium. Notably, the zPPE-coated AuNPs displayed superior antifouling properties, as assessed by the extent of cytokine adsorption relative to both the PEGylated and citrate-coated AuNPs. Taken together, the physicochemical and biological evaluations of zPPE-coated AuNPs in conjunction with PEGylated and citrate-coated analogues indicate the promise of zPPEs as favorable alternatives to PEG coatings, with negligible immunotoxicity, good antifouling performance, and versatile reactive groups that enable the preparation of highly tailored nanomaterials for diverse applications.

Multifunctional Polystyrene Core/Silica Shell Microparticles with Antifouling Properties for Bead-Based Multiplexed and Quantitative Analysis

Commercial bead-based assays are commonly built upon polystyrene particles. The polymeric carrier can be encoded with organic dyes and has ideal material properties for cytometric applications such as low density and high refractive index. However, functional groups are conventionally integrated during polymerization and subsequent modification is limited to the reactivity of those groups. Additionally, polystyrene as the core material leads to many hydrophobic areas still being present on the beads' surfaces even after functionalization, rendering the particles prone to nonspecific adsorption during an application. The latter calls for several washing steps and the use of additives in (bio)analytical assays. In this contribution, we show how these limitations can be overcome by using monodisperse polystyrene (PS) core/silica (SiO₂) shell particles (SiO₂@PS). Two different hydrophobic BODIPY (boron-dipyrromethene) dyes were encapsulated inside a poly(vinylpyrrolidone) (PVP) -stabilized polystyrene core in different concentrations to create 5-plex arrays in two separate detection channels of a cytometer. A subsequent modification of the silica shell with an equimolar APTES/PEGS (aminopropyltriethoxysilane/polyethylene glycol silane) blend added multifunctional properties to the hybrid core/shell microparticles in a single step: APTES provides amino groups for the attachment of a caffeine derivative (as a hapten) to create antigen-coupled microspheres; the PEG moiety effectively suppresses nonspecific binding of antibodies, endowing the surface with antifouling properties. The particles were applied in a competitive fluorescence immunoassay in suspension, and a highly selective wash-free assay for the detection of caffeine in beverages was developed as a proof of concept.

Molecular-Level "Observations" of the Behavior of Gold Nanoparticles in Aqueous Solution and Interacting with a Lipid Bilayer Membrane

We use coarse-grained molecular dynamics simulations to "observe" details of interactions between ligand-covered gold nanoparticles and a lipid bilayer model membrane. In molecular dynamics simulations, one puts the individual atoms and groups of atoms of the physical system to be "observed" into a simulation box, specifies the forms of the potential energies of interactions between them (ultimately quantum based), and lets them individually move classically according to Newton's equations of motion, based on the forces arising from the assumed potential energy forms. The atoms that are chemically bonded to each other stay chemically bonded, following known potentials (force fields) that permit internal degrees of freedom (internal rotation, torsion, vibrations), and the interactions between nonbonded atoms are simplified to Lennard-Jones forms (in our case) and coulombic (where electrical charges are present) in which the parameters are previously optimized to reproduce thermodynamic properties or are based on quantum electronic calculations. The system is started out at a reasonable set of coordinates for all atoms or groups of atoms, and then permitted to develop according to the equations of motion, one small step (usually 10 fs time step) at a time, for millions of steps until the system is at a quasi-equilibrium (usually reached after hundreds of nanoseconds). We then let the system play out its motions further for many nanoseconds to observe the behavior, periodically taking snapshots (saving all positions and energies), and post-processing the snapshots to obtain various average descriptions of the system. Alkanethiols of various lengths serve as examples of hydrophobic ligands and methyl-terminated PEG with various numbers of monomer units serve as examples of hydrophilic ligands. Spherical gold particles of various diameters as well as gold nanorods form the core to which ligands are attached. The nanoparticles are characterized at the molecular level, especially the distributions of ligand configurations and their dependence on ligand length, and surface coverage. Self-assembly of the bilayer from an isotropic solution and observation of membrane properties that correspond well to experimental values validate the simulations. The mechanism of permeation of a gold NP coated with either a hydrophobic or a hydrophilic ligand, and its dependence on surface coverage, ligand length, core diameter, and core shape, is investigated. Lipid response such as lipid flip-flops, lipid extraction, and changes in order parameter of the lipid tails are examined in detail. The mechanism of permeation of a PEGylated nanorod is shown to occur by tilting, lying down, rotating, and straightening up. The nature of the information provided by molecular dynamics simulations permits understanding of the detailed behavior of gold nanoparticles interacting with lipid membranes which in turn helps to understand why some known systems work better than others and aids the design of new particles and improvement of methods for preparing existing ones.

Cholesterol-coated gold nanorods as an efficient nano-carrier for chemotherapeutic delivery and potential treatment of breast cancer: in vitro studies using the MCF-7 cell line

Gold nanorods (GNRs) have a recognized role in treatment of cancers as efficient nanocarriers for chemotherapeutic drug delivery. In this study, GNRs modified with cholesterol-PEG were employed as a nanocarrier for a hydrophobic compound having a promising phosphatidylinositol 3-kinase (PI3Kα) inhibitory activity. The acquired nanocomplex was characterized by optical and infra-red (IR) absorption spectroscopies, in addition to hydrodynamic size and zeta potential. Glide docking and superposing of docked poses of the hydrophobic ligand and cholesterol moiety demonstrated that hydrophobic interactions drive the conjugation and attachment of the ligand to the cholesterol moiety of the nanocarrier. In vitro release study under a cellular environment indicates that the presence of cells has enhanced the release and the cellular uptake of the conjugated ligand. Furthermore, the anti-proliferative assay of the nanocomplex revealed potent cytotoxicity over a low concentration range of the nanocomplex against MCF-7 breast cancer cells compared to the free compound or the nanocarrier alone. Analysis of cellular death modality by flow cytometry showed that the nanocomplex has a rapid effect on cell death, as cells went toward the late apoptotic/necrotic stage rapidly and proportionally to the increase of the nanocomplex concentration. The overall results propose that cholesterol-decorated GNRs could be considered as a promising nanocarrier for hydrophobic drugs to achieve efficient delivery and potential therapy against breast cancer cells.

Gold nanorods demonstrate a recognized role in the treatment of breast cancer cell lines as an efficient nanocarrier for chemotherapeutic drug delivery.

Imaging and therapeutic applications of persistent luminescence nanomaterials

The development of probes for biomolecular imaging and diagnostics is a very active research area. Among the different imaging modalities, optics emerged since it is a noninvasive and cheap imaging technique allowing real time imaging. In vitro, this technique is very useful however in vivo, fluorescence suffers from low signal-to-noise ratio due to tissue autofluorescence under constant excitation. To address this limitation, novel types of optical nanoprobes are actually being developed and among them, persistent luminescence nanoparticles (PLNPs), with long lasting near-infrared (NIR) luminescence capability, allows doing optical imaging without constant excitation and so without autofluorescence. This review will begin by introducing the physical phenomenon associated to the long luminescence decay of such nanoprobes, from minutes to hours after ceasing the excitation. Then we will show how this property can be used to develop in vivo imaging probes and also more recently nanotheranostic agents. Finally, preliminary data on their biocompatibility will be mentioned and we will conclude by envisioning on the future applications and improvements of such nanomaterials.

Peptide-directed encapsulation of inorganic nanoparticles into protein containers

Biomolecules can be combined with inorganic compounds to unite biological features with the chemical and physical properties of abiotic materials. In particular, protein containers, with their inherent ability to encapsulate cargo molecules, are perfect platforms for the generation of multifunctional assemblies. However, encapsulation of foreign cargo is immensely challenging due to the lack of specific interactions between cargo and container. Here, we demonstrate that the highly specific cargo-loading mechanism of the bacterial nanocompartment encapsulin can be employed for encapsulation of artificial cargo like inorganic nanoparticles. For this purpose, container-filling gold nanoparticles were decorated with a small number of encapsulin cargo-loading peptides. By lock-and-key interaction between the peptides and the peptide-binding pockets on the inner container surface, the nanoparticles are encapsulated into encapsulin with extremely high efficiency. Most notably, peptide binding is independent from external factors such as ionic strength. Cargo-loading peptides may serve as generally applicable tool for efficient and specific encapsulation of cargo molecules into a proteinaceous compartment.

MRI Study of the Influence of Surface Coating Aging on the In Vivo Biodistribution of Iron Oxide Nanoparticles

Medical imaging is an active field of research that fosters the necessity for novel multimodal imaging probes. In this line, nanoparticle-based contrast agents are of special interest, since those can host functional entities either within their interior, reducing potential toxic effects of the imaging tracers, or on their surface, providing high payloads of probes, due to their large surface-to-volume ratio. The long-term stability of the particles in solution is an aspect usually under-tackled during probe design in research laboratories, since their performance is generally tested briefly after synthesis. This may jeopardize a later translation into practical medical devices, due to stability reasons. To dig into the effects of nanoparticle aging in solution, with respect to their behavior in vivo, iron oxide stealth nanoparticles were used at two stages (3 weeks vs. 9 months in solution), analyzing their biodistribution in mice. Both sets of nanoprobes showed similar sizes, zeta potentials, and morphology, as observed by dynamic light scattering (DLS) and transmission electronic microscopy (TEM), but fresh nanoparticles accumulated in the kidneys after systemic administration, while aged ones accumulated in liver and spleen, confirming an enormous effect of particle aging on their in vivo behavior, despite barely noticeable changes perceived on a simple inspection of their structural integrity.

Exogenous Physical Irradiation on Titania Semiconductors: Materials Chemistry and Tumor-Specific Nanomedicine

Titania semiconductors can be activated by external physical triggers to produce electrons (e-) and holes (h+) pairs from the energy-band structure and subsequently induce the generation of reactive oxygen species for killing cancer cells, but the traditional ultraviolet light with potential phototoxicity and low-tissue-penetrating depth as the irradiation source significantly hinders the further in vivo broad biomedical applications. Here, the very-recent development of novel exogenous physical irradiation of titania semiconductors for tumor-specific therapies based on their unique physiochemical properties, including near infrared (NIR)-triggered photothermal hyperthermia and photodynamic therapy, X-ray/Cerenkov radiation-activated deep-seated photodynamic therapy, ultrasound-triggered sonodynamic therapy, and the intriguing synergistic therapeutic paradigms by combined exogenous physical irradiations are in focus. Most of these promising therapeutic modalities are based on the semiconductor nature of titania nanoplatforms, together with their defect modulation for photothermal hyperthermia. The biocompatibility and biosafety of these titania semiconductors are also highlighted for guaranteeing their further clinical translation. Challenges and future developments of titania-based therapeutic nanoplatforms and the corresponding developed therapeutic modalities for potential clinical translation of tumor-specific therapy are also discussed and outlooked.

Advances of magnetic nanoparticles in environmental application: environmental remediation and (bio)sensors as case studies

Nanotechnology is an emerging technique drawing increasing attentions in biomedical, electronic, environmental, and industrial application. Nanoparticles (NPs) possess unique optical, electrical, catalytic, and thermal properties, among which magnetic NPs (MNPs) are one of the most important groups with excellent superparamagnetism property, large surface area, and biocompatibility. In this review, methods for synthesizing and functionalizing MNPs are summarized and linked to their applications in environmental science as either adsorbents or catalysts for removing contaminants from environmental matrices, illustrating stronger reactivity, higher removal capacity, and fast kinetics. Additionally, we also comprehensively discuss the application of MNPs as (bio)sensors to selectively and sensitively detect the presence of environmental contaminants or pathogenic bacteria. This work summarizes the recent progresses of using MNPs as powerful tools in environmental science and engineering, raising their state-of-art application from environmental perspectives and benefiting researchers interested in NPs and environmental studies.

Recent advancements in biocompatible inorganic nanoparticles towards biomedical applications

Due to their intrinsic physical properties potentially useful for imaging and therapy as well as their highly engineerable surface, biocompatible inorganic nanoparticles offer novel platforms to develop advanced diagnostic and therapeutic agents for improved detection and more efficacious treatment of major diseases. The in vivo application of inorganic nanoparticles was demonstrated more than two decades ago, however it turns out to be very complicated as nanomaterials exhibit much more sophisticated pharmacokinetic properties than conventional drugs. In this review, we first discuss the in vivo behavior of inorganic nanoparticles after systematic administration, including the basic requirements for nanoparticles to be used in vivo, the impact of the particles' physicochemical properties on their pharmacokinetics, and the effects of the protein corona formed across the nano-bio interface. Next, we summarize the state-of-the-art of the preparation of biocompatible inorganic nanoparticles and bioconjugation strategies for obtaining target-specific nanoprobes. Then, the advancements in sensitive tumor imaging towards diagnosis and visualization of the abnormal signatures in the tumor microenvironment, together with recent studies on atherosclerosis imaging are highlighted. Finally, the future challenges and the potential for inorganic nanoparticles to be translated into clinical applications are discussed.

Engineered nanomaterials and human health: Part 1. Preparation, functionalization and characterization (IUPAC Technical Report)

Nanotechnology is a rapidly evolving field, as evidenced by the large number of publications on the synthesis, characterization, and biological/environmental effects of new nano-sized materials. The unique, size-dependent properties of nanomaterials have been exploited in a diverse range of applications and in many examples of nano-enabled consumer products. In this account we focus on Engineered Nanomaterials (ENM), a class of deliberately designed and constructed nano-sized materials. Due to the large volume of publications, we separated the preparation and characterisation of ENM from applications and toxicity into two interconnected documents. Part 1 summarizes nanomaterial terminology and provides an overview of the best practices for their preparation, surface functionalization, and analytical characterization. Part 2 (this issue, Pure Appl. Chem. 2018; 90(8): 1325–1356) focuses on ENM that are used in products that are expected to come in close contact with consumers. It reviews nanomaterials used in therapeutics, diagnostics, and consumer goods and summarizes current nanotoxicology challenges and the current state of nanomaterial regulation, providing insight on the growing public debate on whether the environmental and social costs of nanotechnology outweigh its potential benefits.

Low-Fouling and Biodegradable Protein-Based Particles for Thrombus Imaging

Nanomedicine holds great promise for vascular disease diagnosis and specific therapy, yet rapid sequestration by the mononuclear phagocytic system limits the efficacy of particle-based agents. The use of low-fouling polymers, such as poly(ethylene glycol), efficiently reduces this immune recognition, but these nondegradable polymers can accumulate in the human body and may cause adverse effects after prolonged use. Thus, new particle formulations combining stealth, low immunogenicity and biocompatible features are required to enable clinical use. Here, a low-fouling particle platform is described using exclusively protein material. A recombinant protein with superior hydrophilic characteristics provided by the amino acid repeat proline, alanine, and serine (PAS) is designed and cross-linked into particles with lysine (K) and polyglutamic acid (E) using mesoporous silica templating. The obtained PASKE particles have low-fouling behavior, have a prolonged circulation time compared to albumin-based particles, and are rapidly degraded in the cell's lysosomal compartment. When labeled with near-infrared fluorescent molecules and functionalized with an anti-glycoprotein IIb/IIIa single-chain antibody targeting activated platelets, the particles show potential as a noninvasive molecular imaging tool in a mouse model of carotid artery thrombosis. The PASKE particles constitute a promising biodegradable and versatile platform for molecular imaging of vascular diseases.

Fabrication of a Flexible Gold Nanorod Polymer Metafilm via a Phase Transfer Method as a SERS Substrate for Detecting Food Contaminants

Surface enhanced Raman scattering (SERS) has been widely used in detection of food safety due to the nondestructive examination property. Here, we reported a flexible SERS film based on a polymer-immobilized gold nanorod polymer metafilm. Polystyrene-polyisoprene-polystyrene (SIS), a transparent and flexible, along with having excellent elasticity, polymer, was chosen as the main support of gold nanorods. A simple phase transfer progress was adopted to mix the gold nanorods with the polymer, which can further be used in most water-insoluble polymers. The SERS film performed satisfactorily while being tested in a series of standard Raman probes, like crystal violet (CV) and malachite green (MG). Moreover, the excellent reproducibility and elastic properties make the film a promising substrate in practical detection. Hence, the MG detection on the fish surface and trace thiram detection on orange pericarp were inspected with detection results of 1 × 10^-10 and 1 × 10^-6 M, which were below the demand of the National standard of China, exactly matching the realistic application requirements.

Synergistic Toxicity Produced by Mixtures of Biocompatible Gold Nanoparticles and Widely Used Surfactants

Nanoparticle safety is usually determined using solutions of individual particles that are free of additives. However, the size-dependent properties of nanoparticles can be readily altered through interactions with other components in a mixture. In applications, nanoparticles are commonly combined with surfactants or other additives to increase dispersion or to enhance product performance. Surfactants might also influence the biological activity of nanoparticles; however, little is known about such effects. We investigated the influence of surfactants on nanoparticle biocompatibility by studying mixtures of ligand-stabilized gold nanoparticles and Polysorbate 20 in embryonic zebrafish. These mixtures produced synergistic toxicity at concentrations where the individual components were benign. We examined the structural basis for this synergy using solution-phase analytical techniques. Spectroscopic and X-ray scattering studies suggest that the Polysorbate 20 does not affect the nanoparticle core structure. DOSY NMR showed that the hydrodynamic size of the nanoparticles increased, suggesting that Polysorbate 20 assembles on the nanoparticle surfaces. Mass spectrometry showed that these assemblies have both increased uptake and increased toxicity in zebrafish, as compared to the gold nanoparticles alone. We probed the generality of this synergy by performing toxicity assays with two other common surfactants, Polysorbate 80 and sodium dodecyl sulfate. These surfactants also caused synergistic toxicity, although the extent and time frame of the response depends upon the surfactant structure. These results demonstrate a need for additional, foundational studies to understand the effects of surfactants on nanoparticle biocompatibility and challenge traditional models of nanoparticle safety where the matrix is assumed to have only additive effects on nanoparticle toxicity.

Incorporation of nanoparticles into transplantable decellularized matrices: Applications and challenges

Decellularization of tissues can significantly improve regenerative medicine and tissue engineering by producing natural, less immunogenic, three-dimensional, acellular matrices with high biological activity for transplantation. Decellularized matrices retain specific critical components of native tissues such as stem cell niche, various growth factors, and the ability to regenerate in vivo. However, recellularization and functionalization of these matrices remain limited, highlighting the need to improve the characteristics of decellularized matrices. Incorporating nanoparticles into decellularized tissues can overcome these limitations because nanoparticles possess unique properties such as multifunctionality and can modify the surface of decellularized matrices with additional growth factors, which can be loaded onto the nanoparticles. Therefore, in this minireview, we highlight the various approaches used to improve decellularized matrices with incorporation of nanoparticles and the challenges present in these applications.

Reversible Nanogate System for Mesoporous Silica Nanoparticles Based on Diels-Alder Adducts

The implementation of nanoparticles as nanomedicines requires sophisticated surface modifications to reduce the immune response and enhance recognition abilities. Mesoporous silica nanoparticles present extraordinary host-guest abilities and facile surface functionalization. These two factors make them ideal candidates for the development of novel drug-delivery systems, at the expense of increasing structural complexity. With this idea in mind, a system composed of triggerable and tunable silica nanoparticles was developed for application as drug-delivery nanocarriers. Diels-Alder cycloaddition adducts were chosen as thermal-responsive units that permitted the binding of gold nanocaps able to block the pores and allow the incorporation of targeting fragments. The capping efficiency was tested under different thermal conditions to give outstanding efficiencies within the physiological range and mild temperatures, as well as enhanced release under pulsing heating cycles, which showed the best release profiles.

Nano-assemblies of cationic mPEG brush block copolymers with gadolinium polyoxotungstate [Gd(W5O18)2]9- form stable, high relaxivity MRI contrast agents

Polyoxometalates (POMs) incorporating paramagnetic ions, such as gadolinium, show promise as contrast agents for application in magnetic resonance imaging (MRI). Specifically, [Gd(W5O18)2]9- (denoted as GdWO) has been reported to have a higher relaxivity than commercially available contrast agents, but it's clinical utility has been limited by the intrinsic instability of POMs at physiological pH (7.4). In the current report we present a stability study on neat GdWO and nano-assemblies of block copolymers with GdWO in the pH range 5.0-7.4 to assess their suitability as MRI contrast agents. Neat GdWO only maintained structural stability between pH 5.4 and 6.4, and demonstrated poor MRI contrast at pH 7.4. To address this pH instability, GdWO was self-assembled with cationic mPEG brush block copolymers containing 20 or 40 units derived from the cationic monomer, 2-dimethylaminoethyl methacrylate (DMAEMA). Nano-assemblies with different charge ratios were synthesised and characterised according to their size, stability, contrasting properties and toxicity. The longitudinal relaxivity (r1) of the nano-assemblies was found to be dependent on the charge ratio, but not on the length of the cationic polymer block. Further investigation of PDMAEMA20 nano-assemblies demonstrated that they were stable over the pH range 5.0-7.4, exhibiting a higher r1 than either neat GdWO (2.77 s-1 mM-1) or clinical MRI contrast agent Gd-DTPA (4.1 s-1 mM-1) at pH 7.4. Importantly, the nano-assembly with the lowest charge ratio (0.2), showed the highest r1 (12.1 s-1 mM-1) whilst, stabilising GdWO over the pH range studied, eliciting low toxicity with MDA-MB231 cells.

Big Potential from Small Agents: Nanoparticles for Imaging-Based Companion Diagnostics

The importance of medical imaging in the diagnosis and monitoring of cancer cannot be overstated. As personalized cancer treatments are gaining popularity, a need for more advanced imaging techniques has grown significantly. Nanoparticles are uniquely suited to fill this void, not only as imaging contrast agents but also as companion diagnostics. This review provides an overview of many ways nanoparticle imaging agents have contributed to cancer imaging, both preclinically and in the clinic, as well as charting future directions in companion diagnostics. We conclude that, while nanoparticle-based imaging agents are not without considerable scientific and developmental challenges, they enable enhanced imaging in nearly every modality, hold potential as in vivo companion diagnostics, and offer precise cancer treatment and maximize intervention efficacy.

Self-assembly of bioactive peptides, peptide conjugates, and peptide mimetic materials

Molecular self-assembly is a multi-disciplinary field of research, with potential chemical and biological applications. One of the main driving forces of self-assembly is molecular amphiphilicity, which can drive formation of complex and stable nanostructures. Self-assembling peptide and peptide conjugates have attracted great attention due to their biocompatibility, biodegradability and biofunctionality. Understanding assembly enables the better design of peptide amphiphiles which may form useful and functional nanostructures. This review covers self-assembly of amphiphilic peptides and peptide mimetic materials, as well as their potential applications.

Nanoscale Organic-Inorganic Hybrid Photosensitizers for Highly Effective Photodynamic Cancer Therapy

Recently, photodynamic therapy (PDT) has attracted significant attention as a minimally invasive approach for cancer treatment. Clinical applications of current photosensitizers are often limited by their poor water solubility, low singlet oxygen (¹O₂) quantum yields, long-term toxicity, instability, and complex nanostructures. Here, we report a rational design of polyhedral oligomeric silsesquioxanes (POSSs)-based porphyrin (PPP₅₀₀₀) used as an intrinsically nanoscale photosensitizer. In this strategy, inorganic 3D rigid block POSSs not only act as antiaggregate units but also provide conjugating reactive sites for further chemical modification. Without an additional carrier and formulation process, PPP₅₀₀₀ intrinsically shows high water solubility (∼40 mg/mL), good PDT efficiency, and more excellent anticancer performance compared to tetra(hydroxyphenyl)porphyrin (the parent compound of m-THPC, Foscan). Considering the organic nature of porphyrin and the biodegradable property of inorganic POSS scaffolds at physiological conditions, the present work may lead to a new generation of biodegradable and intrinsic PDT agents with overall performance superior to conventional agents in terms of ¹O₂ production efficiency, water solubility, structurally stability, photostability, and biocompatibility.

Decoration of metal oxide surface with {111} form Au nanoparticles using PEGylation

The benefit of introducing gold nanoparticles is due to the plasmon relaxation process. The plasmon decay induces various phenomena such as near-field enhancement, hot electron injection, and resonance energy transfer. Shape-controlled octahedral gold nanoparticles can maximize the efficiency of these processes. For practical purposes, a high-coverage decoration method, comparable to physical vapor deposition on a metal oxide semiconductor nanostructure, is indispensable. However, the ligand exchange reaction to attach octahedral gold nanoparticles is limited in aqueous solution due to the inactivity of the gold (111) surface as a result of a densely-packed cetyltrimethylammonium bilayer structure. Herein, we report a controllable high-coverage surface decoration method of octahedral gold nanoparticles on the targeted semiconductor nanostructures via phase transfer by an organic medium with thiolated-polyethylene glycol. Our results deliver an innovative platform for future plasmonic gold nanoparticle applications.

Phase transfer in the ethanol-dichloromethane medium extinguished the limitation of the ligand exchange reaction on the gold (111) surface. High-coverage octahedral Au NP decoration on metal oxide semiconductors is achieved by the process.

Investigating the Intracellular Behaviors of Liposomal Nanohybrids via SERS: Insights into the Influence of Metal Nanoparticles

The recent proposition to combine liposomes with nanoparticles presents great opportunities to develop multifunctional drug delivery platforms. Although impressive progress has been made, attempts to elucidate the role nanoparticles play in the integral nanohybrids are still rather limited. Here, using surface-enhanced Raman scattering (SERS) technique, we investigate the influence of metal nanoparticles on the liposomal properties, ranging from drug release to intracellular movement. Specifically, we prepared SERS-active nanohybrids by attaching metal nanoparticles to liposomes and employed SERS signals to explore the intracellular behavior of the nanohybrids. Once deposited on the cell membrane, the nanohybrids entered tumor cells via clathrin-mediated endocytosis and then moved to lysosomes. In comparison with pure liposomes, metal nanoparticles in the nanohybrids had little influence on the properties of liposomes. This study fills the gap of the function of nanoparticles in the overall nanohybrids, which provides a significant prerequisite for efficient drug delivery in therapeutic applications.

Facile meltPEGylation of flame-made luminescent Tb3+-doped yttrium oxide particles: hemocompatibility, cellular uptake and comparison to silica

MeltPEGylation constitutes an elegant one-pot route for the efficient PEGylation of metal oxide nanoparticles with improved hemo- and cytocompatibility.

Particle Targeting in Complex Biological Media

Over the past few decades, nanoengineered particles have gained increasing interest for applications in the biomedical realm, including diagnosis, imaging, and therapy. When functionalized with targeting ligands, these particles have the potential to interact with specific cells and tissues, and accumulate at desired target sites, reducing side effects and improve overall efficacy in applications such as vaccination and drug delivery. However, when targeted particles enter a complex biological environment, the adsorption of biomolecules and the formation of a surface coating (e.g., a protein corona) changes the properties of the carriers and can render their behavior unpredictable. For this reason, it is of importance to consider the potential challenges imposed by the biological environment at the early stages of particle design. This review describes parameters that affect the targeting ability of particulate drug carriers, with an emphasis on the effect of the protein corona. We highlight strategies for exploiting the protein corona to improve the targeting ability of particles. Finally, we provide suggestions for complementing current in vitro assays used for the evaluation of targeting and carrier efficacy with new and emerging techniques (e.g., 3D models and flow-based technologies) to advance fundamental understanding in bio-nano science and to accelerate the development of targeted particles for biomedical applications.

Controlled chemical synthesis of CaO2 particles coated with polyethylene glycol: characterization of crystallite size and oxygen release kinetics

The oxygen release pattern of CaO₂ nanoparticles was biphasic: an initial burst phase for the first 24 hours followed by a descending release rate for three days. The oxygen release rate in the second phase mainly depended on the shrinking-core model for CaO₂ hydrolysis.

In Vivo Pharmacokinetics of Magnetic Nanoparticles

Over the past few years, many papers have been published on the nanomedical applications of magnetic nanoparticles. However, most studies lack important information about the in vivo behavior of these nanoparticles, which is a critical aspect for their rational design. In this chapter we describe a simple protocol for the in vivo characterization of the pharmacokinetics of magnetic nanoparticles intravenously injected in mice, using basic MRI sequences.

PEGylation of zinc nanoparticles amplifies their ability to enhance olfactory responses to odorant

Olfactory responses are intensely enhanced with the addition of endogenous and engineered primarily-elemental small zinc nanoparticles (NPs). With aging, oxidation of these Zn nanoparticles eliminated the observed enhancement. The design of a polyethylene glycol coating to meet storage requirements of engineered zinc nanoparticles is evaluated to achieve maximal olfactory benefit. The zinc nanoparticles were covered with 1000 g/mol or 400 g/mol molecular weight polyethylene glycol (PEG). Non-PEGylated and PEGylated zinc nanoparticles were tested by electroolfactogram with isolated rat olfactory epithelium and odorant responses evoked by the mixture of eugenol, ethyl butyrate and (±) carvone after storage at 278 K (5 ^oC), 303 K (30 ^oC) and 323 K (50 ^oC). The particles were analyzed by atomic force microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and laser Doppler velocimetry. Our data indicate that stored ZnPEG400 nanoparticles maintain physiologically-consistent olfactory enhancement for over 300 days. These engineered Nanoparticles support future applications in olfactory research, sensitive detection, and medicine.

Zinc oxide nanoparticles: Synthesis, antiseptic activity and toxicity mechanism

Zinc oxide (ZnO), as a material with attractive properties, has attracted great interest worldwide, particularly owing to the implementation of the synthesis of nano-sized particles. High luminescent efficiency, a wide band gap (3.36eV), and a large exciton binding energy (60meV) has triggered intense research on the production of nanoparticles using different synthesis methods and on their future applications. ZnO nanomaterials can be used in industry as nano-optical and nano-electrical devices, in food packaging and in medicine as antimicrobial and antitumor agents. The increasing focus on nano zinc oxide resulted in the invention and development of methods of nanoparticles synthesis. Recently, various approaches including physical, chemical and biological ("green chemistry") have been used to prepare ZnO nanocomposites with different morphologies. The obtained nanoparticles can be characterized with a broad range of analytical methods including dynamic light scattering (DLS), electron microscopy (TEM, SEM), UV-VIS spectroscopy, X-ray diffraction (XRD) or inductively coupled plasma with mass spectrometry (ICP-MS). With these it is possible to obtain information concerning the size, shape and optical properties of nanoparticles. ZnO NPs exhibit attractive antimicrobial properties against bacteria (Gram-positive and Gram-negative) and fungi. Zinc oxide nanocomposites show also selective toxicity toward normal and cancerous cells, which is explained by reactive oxygen formation (ROS). Yet despite the potentially interesting antitumor activity of ZnO nanoparticles, it has been proven that they can be also cytotoxic and genotoxic for multiple types of human cells (i.e. neuronal or epithelial cells). This paper reviews the methods of synthesizing zinc oxide nanocomposites as well as their characteristics, antimicrobial activity and cytotoxicity against normal and tumor cells.

Convenient and effective ICGylation of magnetic nanoparticles for biomedical applications

Nanoprobes used for biomedical applications usually require surface modifications with amphiphilic surfactants or inorganic coating materials to enhance their biocompatibility. We proposed a facile synthetic approach for the phase transfer of hydrophobic magnetic nanoparticles by the direct adherence of fluorescent probes, without any chemical modifications, for use as a magnetic resonance (MR)/near-infrared (NIR) fluorescence bimodal imaging contrast agent. Indocyanine green (ICG) was used not only as an optical component for NIR imaging, but also as a surfactant for phase transfer with no superfluous moiety: we therefore called the process "ICGylation". Cell labeling and tracking in vivo with ICGylated magnetic nanoparticles were successfully performed by MR/NIR dual-mode imaging for three days, which showed remarkable biostability without any additional surface functionalization. We expect that this novel MR/NIR contrast agent demonstrating sensitive detection and simultaneous imaging capability can be used in diverse fields, such as the imaging and tracking of immune cells to confirm immunotherapeutic efficacy. The approach used could also be applied to other kinds of nanoparticles, and it would promote the development of advanced functional multimodal nanobioprobes.

Taxane-Grafted Metal-Oxide Nanoparticles as a New Theranostic Tool against Cancer: The Promising Example of Docetaxel-Functionalized Titanate Nanotubes on Prostate Tumors

The combination of anticancer drugs and metal oxide nanoparticles is of great interest in cancer nanomedicine. Here, the development of a new nanohybrid, titanate nanotube-docetaxel (TiONts-DTX) is reported, the two parts of which are conjugated by covalent linkages. Unlike most nanoparticles currently being developed for biomedical purposes, TiONts present a needle-shaped morphology. The surface of TiONts is linked with 3-aminopropyl triethoxysilane and with a hetero-bifunctional polymer (polyethylene glycol) to create well-dispersed and biocompatible nanovectors. The prefunctionalized surface of this scaffold has valuable attachments to graft therapeutic agents (DTX in our case) as well as chelating agents (1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid) to monitor the nanohybrids. To evaluate drug efficacy, in vitro tests have demonstrated that the association between TiONts and DTX shows cytotoxic activity against a hormone-refractory prostate cancer cell line (22Rv1) whereas TiONts without DTX do not. Finally, the first in vivo tests with intratumoral injections show that more than 70% of TiONts nanovectors are retained within the tumor for at least 7 d. Moreover, tumor growth in mice receiving TiONts-DTX is significantly slower than that in mice receiving free DTX. This nanohybrid can thus become a promising new tool in biomedicine to fight against prostate cancer.

Single-Step Synthesis of Small, Azide-Functionalized Gold Nanoparticles: Versatile, Water-Dispersible Reagents for Click Chemistry

Nanoparticles possessing functional groups that can be readily conjugated (e.g., through click chemistry) are important precursors for the preparation of customized nanohybrid products. Such nanoparticles, if they are stable against agglomeration, are easily dispersible and have well-defined surface chemistry and size. As click-ready reagents, they can be stored until their time of use and then simply dispersed and reacted with an appropriate substrate. Gold nanoparticles (AuNPs) are excellent candidates for this purpose, and some clickable gold nanoparticles have been developed; however, AuNPs for use in aqueous systems are often prepared through difficult multistep processes and/or can be poorly dispersible in water. Here we report a single-step synthesis of clickable, water-dispersible AuNPs. The synthesis yields uniform, 3.5 nm diameter cores coated with a well-defined molecular ligand shell that makes the AuNPs stable and dispersible in water. The AuNP mixed ligand shell consists of hydroxyl-terminated ethylene glycol-based ligands to promote dispersion in water and a small number of azide-terminated ligands that readily undergo click reactions with alkynes. The use of a mesofluidic reactor affords fine control over the core size and ligand shell composition and ensures reproducible results (e.g., less than 0.1 nm variation in core diameter between batches). The purified reagents were successfully coupled to a variety of alkyne-containing substrates using both Cu-catalyzed and strain-promoted click reactions. Particle size, morphology, stability, and surface composition were thoroughly characterized using small-angle X-ray scattering, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-vis, and ¹H NMR before and after the click reactions. Both the parent nanoparticles and their click chemistry products are stable during storage and remained dispersible for over a year in water, suggesting their potential for environmental, biological, and biomedical applications.