Luminescent sensing of oxygen using a quenchable probe and upconverting nanoparticles

Elimination of photon quenching by a transition layer to fabricate a quenching-shield sandwich structure for 800 nm excited upconversion luminescence of Nd3+-sensitized nanoparticles

Nd3+-sensitized quenching-shield sandwich-structured upconversion nanoparticles are reported, which exhibit highly efficient upconversion photoluminescence under excitation by an 800 nm continuous-wave laser. The transition-layer structure is essential to bridge energy transfer from the sensitizer to the activator and simultaneously block energy back-transfer from the activator to the sensitizer. These 800 nm-excited upconversion nanoparticles are a key step toward the development of upconversion nanophosphors for biological applications.

Optical methods for sensing and imaging oxygen: materials, spectroscopies and applications

We review the current state of optical methods for sensing oxygen. These have become powerful alternatives to electrochemical detection and in the process of replacing the Clark electrode in many fields. The article (with 694 references) is divided into main sections on direct spectroscopic sensing of oxygen, on absorptiometric and luminescent probes, on polymeric matrices and supports, on additives and related materials, on spectroscopic schemes for read-out and imaging, and on sensing formats (such as waveguide sensing, sensor arrays, multiple sensors and nanosensors). We finally discuss future trends and applications and summarize the properties of the most often used indicator probes and polymers. The ESI† (with 385 references) gives a selection of specific applications of such sensors in medicine, biology, marine and geosciences, intracellular sensing, aerodynamics, industry and biotechnology, among others.

Cyclometallated ruthenium complex-modified upconversion nanophosphors for selective detection of Hg2+ ions in water

Upconversion detection nanocomposites were assembled for the selective luminescent detection of mercury ions in water. A hydrophobic cyclometallated ruthenium complex [Ru(II)(bpy)2(thpy)]PF6 (abbreviated as Ru1; bpy = 2,2'-bipyridine and thpy = 2-(2-thienyl)pyridine) is employed as a chemodosimeter to assemble on amphiphilic polymer-coating upconversion nanophosphors (UCNPs) based on the hydrophobic-hydrophobic interaction. Upon addition of Hg(2+), the nanocomposite not only exhibits a remarkable color change from deep-red to yellow, but also an enhanced upconversion luminescence (UCL) emission by hindering the luminescent resonance energy transfer (LRET) process from the upconversion emission of UCNPs to Ru1. Using the ratiometric UCL emission as a detection signal, the detection limit of Hg(2+) for this nanoprobe in aqueous solution is 8.2 ppb, which is much lower than that (329 ppb) determined by UV/Vis technology. Such an Hg(2+)-tunable LRET process provides a general strategy for fabricating a water-soluble upconversion-based nanoprobe for some special analyte.

Upconversion fluorescence resonance energy transfer biosensor for sensitive detection of human immunodeficiency virus antibodies in human serum

An upconversion FRET-based biosensor has been developed for the sensitive and selective determination of HIV antibodies in human serum.

An optical probe possessing upconversion luminescence and Hg(2+)-sensing properties

A Hg(2+)-selective chromophoric upconversion nanosystem is achieved by covalently grafting Rhodamine B hydrazide (RB-hydrazide) onto upconversion luminescent nanorod core-shell structures. The prepared β-NaYF4 nanorods are coated with silica and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDAX), Fourier-transform infrared spectroscopy (FTIR), and photoluminescence spectra. Under 980 nm excitation, the upconversion luminescence is sensitive towards Hg(2+) because RB-hydrazide-Hg can efficiently absorb green upconversion emission. The prepared nanocomposites exhibit high sensitivity and selectivity towards Hg(2+) over other metal ions. These results indicate that this nanosystem could be developed as a promising fluorescence probe for detecting Hg(2+) ions.

Ligand-functionalization of BPEI-coated YVO4:Bi3+,Eu3+ nanophosphors for tumor-cell-targeted imaging applications

In this study, surface-functionalized, branched polyethylenimine (BPEI)-modified YVO4:Bi(3+),Eu(3+) nanocrystals (NCs) were successfully synthesized by a simple, rapid, solvent-free hydrothermal method. The BPEI-coated YVO4:Bi(3+),Eu(3+) NCs with high crystallinity show broad-band excitation in the λ=250 to 400 nm near-ultraviolet (NUV) region and exhibit a sharp-line emission band centered at λ=619 nm under excitation at λ=350 nm. The surface amino groups contributed by the capping agent, BPEI, not only improve the dispersibility and water/buffer stability of the BPEI-coated YVO4:Bi(3+),Eu(3+) NCs, but also provide a capability for specifically targeted biomolecule conjugation. Folic acid (FA) and epidermal growth factor (EGF) were further attached to the BPEI-coated YVO4:Bi(3+),Eu(3+) NCs and exhibited effective positioning of fluorescent NCs toward the targeted folate receptor overexpressed in HeLa cells or EGFR overexpressed in A431 cells with low cytotoxicity. These results demonstrate that the ligand-functionalized, BPEI-coated YVO4:Bi(3+),Eu(3+) NCs show great potential as a new-generation biological luminescent bioprobe for bioimaging applications. Moreover, the unique luminescence properties of BPEI-coated YVO4:Bi(3+),Eu(3+) NCs show potential to combine with a UVA photosensitizing drug to produce both detective and therapeutic effects for human skin cancer therapy.

In vitro cell imaging using multifunctional small sized KGdF4:Yb3+,Er3+ upconverting nanoparticles synthesized by a one-pot solvothermal process

Multifunctional KGdF4:18%Yb(3+),2%Er(3+) nanoparticles with upconversion fluorescence and paramagnetism are synthesized. The average sizes of the nanoparticles capped with branched polyethyleneimine (PEI) and 6-aminocaproic acid (6AA) are ~14 and ~13 nm, respectively. Our KGdF4 host does not exhibit any phase change with the decrease of particle size, which can prevent the detrimental significant decrease in upconversion luminescence caused by this effect observed in the well-known NaYF4 host. The branched PEI and 6AA capping ligands endow our nanoparticles with water-dispersibility and biocompatibility, which can favor internalization of our nanoparticles into the cytoplasm of HeLa cells and relatively high cell viability. The strong upconversion luminescence detected at the cytoplasm of HeLa cells incubated with the branched PEI-capped nanoparticles is probably attributed to the reported high efficiency of cellular uptake. The magnetic mass susceptibility of our nanoparticle is 8.62 × 10(-5) emu g(-1) Oe(-1). This is the highest value ever reported in trivalent rare-earth ion-doped KGdF4 nanoparticles of small size (≤14 nm), and is very close to that of nanoparticles used as T1 contrast agents in magnetic resonance imaging. These suggest the potential of our KGdF4:Yb(3+),Er(3+) nanoparticles as small-sized multifunctional bioprobes.

Surface-functionalized nanoparticles for biosensing and imaging-guided therapeutics

In this article, the very recent progress of various functional inorganic nanomaterials is reviewed including their unique properties, surface functionalization strategies, and applications in biosensing and imaging-guided therapeutics. The proper surface functionalization renders them with stability, biocompatibility and functionality in physiological environments, and further enables their targeted use in bioapplications after bioconjugation via selective and specific recognition. The surface-functionalized nanoprobes using the most actively studied nanoparticles (i.e., gold nanoparticles, quantum dots, upconversion nanoparticles, and magnetic nanoparticles) make them an excellent platform for a wide range of bioapplications. With more efforts in recent years, they have been widely developed as labeling probes to detect various biological species such as proteins, nucleic acids and ions, and extensively employed as imaging probes to guide therapeutics such as drug/gene delivery and photothermal/photodynamic therapy.

Multicolor hybrid upconversion nanoparticles and their improved performance as luminescence temperature sensors due to energy transfer

By combining upconversion nanoparticles (UCNPs) with rhodamine 6G (R6G) dye molecules, multicolor emission based on energy transfer is achieved. The complexes can be dissolved in epoxy resin, and self-assembled hemispherical microstructures are fabricated through a hydrophobic effect. A luminescence temperature sensor takes advantage of the high temperature sensitivity of the complexes due to energy transfer.

Sensing using rare-earth-doped upconversion nanoparticles

Optical sensing plays an important role in theranostics due to its capability to detect hint biochemical entities or molecular targets as well as to precisely monitor specific fundamental psychological processes. Rare-earth (RE) doped upconversion nanoparticles (UCNPs) are promising for these endeavors due to their unique frequency converting capability; they emit efficient and sharp visible or ultraviolet (UV) luminescence via use of ladder-like energy levels of RE ions when excited at near infrared (NIR) light that are silent to tissues. These features allow not only a high penetration depth in biological tissues but also a high detection sensitivity. Indeed, the energy transfer between UCNPs and biomolecular or chemical indicators provide opportunities for high-sensitive bio- and chemical-sensing. A temperature-sensitive change of the intensity ratio between two close UC bands promises them for use in temperature mapping of a single living cell. In this work, we review recent investigations on using UCNPs for the detection of biomolecules (avidin, ATP, etc.), ions (cyanide, mecury, etc.), small gas molecules (oxygen, carbon dioxide, ammonia, etc.), as well as for in vitro temperature sensing. We also briefly summarize chemical methods in synthesizing UCNPs of high efficiency that are important for the detection limit.

Lanthanide-doped luminescent nano-bioprobes: from fundamentals to biodetection

Trivalent lanthanide (Ln(3+))-doped luminescent inorganic nanoparticles (NPs), characterized by long-lived luminescence, large Stokes and/or anti-Stokes shifts, narrow emission bands and high photochemical stability, are considered to be promising candidates as luminescent bioprobes in biomedicine and biotechnology. In this feature article, we provide a brief overview of the most recent advances in Ln(3+)-doped luminescent inorganic NPs as sensors, which covers from their chemical and physical fundamentals to biodetection, such as controlled synthesis methodology, surface modification chemistry, optical physics, and their promising applications in diverse bioassays, with an emphasis on heterogeneous and homogeneous in vitro biodetection. Finally, some of the most important emerging trends and future efforts toward this active research field are also proposed.

FRET excited ratiometric oxygen sensing in living tissue

Dynamic analysis of oxygen (O₂) has been limited by the lack of a real-time, quantitative, and biocompatible sensor. To address these demands, we designed a ratiometric optode matrix consisting of the phosphorescence quenching dye platinum (II) octaethylporphine ketone (PtOEPK) and nanocystal quantum dots (NQDs), which when embedded within an inert polymer matrix allows long-term pre-designed excitation through fluorescence resonance energy transfer (FRET). Depositing this matrix on various glass substrates allowed the development of a series of optical sensors able to measure interstitial oxygen concentration [O₂] with several hundred millisecond temporal resolution in varying biological microdomains of active brain tissue.

Upconversion nanoparticle based LRET system for sensitive detection of MRSA DNA sequence

In this short communication we report an efficient and versatile method for the detection of methicillin-resistant staphylococcus aureus (MRSA) DNA sequence with high sensitivity and specificity. This method is based on upconversion nanoparticles (UCNs) and luminescence resonance energy transfer (LRET) between NaYF4:Yb, Er UCNs, the energy donor, and carboxytetramethylrhodamine (TAMRA), the energy acceptor. The NaYF4:Yb, Er UCNs were prepared with citrate capping thus dispersible in aqueous solutions. MRSA capture oligonucleotides were covalently immobilized onto the surface of the UCNs. TAMRA labeled MRSA DNA report oligonucleotides were brought close to the UCNs upon sandwich hybridization between the capture and report oligonucleotides and a long MRSA target DNA, resulting in an efficient LRET. Specific detection of MRSA DNA sequences with a detection limit as low as 0.18nM was achieved using this method. To the best of our knowledge, this is the first report to detect MRSA DNA sequence by using UCNs as energy donor through an efficient LRET process.

A PEGylated fluorescent turn-on sensor for detecting fluoride ions in totally aqueous media and its imaging in live cells

Owing to the considerable significance of fluoride anions for health and environmental issues, it is of great importance to develop methods that can rapidly, sensitively and selectively detect the fluoride anion in aqueous media and biological samples. Herein, we demonstrate a robust fluorescent turn-on sensor for detecting the fluoride ion in a totally aqueous solution. In this study, a biocompatible hydrophilic polymer poly(ethylene glycol) (PEG) is incorporated into the sensing system to ensure water solubility and to enhance biocompatibility. tert-Butyldiphenylsilyl (TBDPS) groups were then covalently introduced onto the fluorescein moiety, which effectively quenched the fluorescence of the sensor. Upon addition of fluoride ion, the selective fluoride-mediated cleavage of the Si-O bond leads to the recovery of the fluorescein moiety, resulting in a dramatic increase in fluorescence intensity under visible light excitation. The sensor is responsive and highly selective for the fluoride anion over other common anions; it also exhibits a very low detection limit of 19 ppb. In addition, this sensor is operative in some real samples such as running water, urine, and serum and can accurately detect fluoride ions in these samples. The cytotoxicity of the sensor was determined to be Grade I toxicity according to United States Pharmacopoeia and ISO 10993-5, suggesting the very low cytotoxicity of the sensor. Moreover, it was found that the senor could be readily internalized by both HeLa and L929 cells and the sensor could be utilized to track fluoride level changes inside the cells.

Hydrothermal synthesis of NaLuF4:153Sm,Yb,Tm nanoparticles and their application in dual-modality upconversion luminescence and SPECT bioimaging

Upconversion luminescence (UCL) properties and radioactivity have been integrated into NaLuF(4):(153)Sm,Yb,Tm nanoparticles by a facile one-step hydrothermal method, making these nanoparticles potential candidates for UCL and single-photon emission computed tomography (SPECT) dual-modal bioimaging in vivo. The introduction of small amount of radioactive (153)Sm(3+) can hardly vary the upconversion luminescence properties of the nanoparticles. The as-designed nanoparticles showed very low cytotoxicity, no obvious tissue damage in 7 days, and excellent in vitro and in vivo performances in dual-modal bioimaging. By means of a combination of UCL and SPECT imaging in vivo, the distribution of the nanoparticles in living animals has been studied, and the results indicated that these particles were mainly accumulated in the liver and spleen. Therefore, the concept of (153)Sm(3+)/Yb(3+)/Tm(3+) co-doped NaLuF(4) nanoparticles for UCL and SPECT dual-modality imaging in vivo of whole-body animals may serve as a platform for next-generation probes for ultra-sensitive molecular imaging from the cellular scale to whole-body evaluation. It also introduces an easy methodology to quantify in vivo biodistribution of nanomaterials which still needs further understanding as a community.

Determination of ammonia in water based on chemiluminescence resonance energy transfer between peroxymonocarbonate and branched NaYF4:Yb3+/Er3+ nanoparticles

The ultraweak chemiluminescence (CL) from the reaction of hydrogen peroxide and carbonate is strongly enhanced by the branched NaYF(4):Yb(3+)/Er(3+) nanoparticle (NP) in the presence of aqueous ammonia. It was explained that ammonia catalyzes the decomposition of peroxymonocarbonate, which is the product of hydrogen peroxide mixing with bicarbonate, making the formation of (CO(2))(2)*, (O(2))(2)*, and (1)O(2). The excitation energy, carried by these emitter intermediates, can be transferred to NaYF(4):Yb(3+)/Er(3+) NP. The CL intensity is directly proportional to the concentration of ammonia present in the solution. A flow-injection CL system with high sensitivity, selectivity, and reproducibility is proposed for the determination of aqueous ammonia. The proposed method exhibited advantages in a larger linear range from 0.5 μmol L(-1) to 50 μmol L(-1) and a lower detection limit of 1.1 × 10(-8) mol L(-1) (S/N = 3). This method has been successfully applied to the evaluation of ammonia in water samples with recoveries from 95% to 108%. The relative standard deviations are 1.8% and 4.1% for intra-assay and inter-assay precision, respectively.

Amine-functionalized lanthanide-doped zirconia nanoparticles: optical spectroscopy, time-resolved fluorescence resonance energy transfer biodetection, and targeted imaging

Ultrasmall inorganic oxide nanoparticles doped with trivalent lanthanide ions (Ln(3+)), a new and huge family of luminescent bioprobes, remain nearly untouched. Currently it is a challenge to synthesize biocompatible ultrasmall oxide bioprobes. Herein, we report a new inorganic oxide bioprobe based on sub-5 nm amine-functionalized tetragonal ZrO(2)-Ln(3+) nanoparticles synthesized via a facile solvothermal method and ligand exchange. By utilizing the long-lived luminescence of Ln(3+), we demonstrate its application as a sensitive time-resolved fluorescence resonance energy transfer (FRET) bioprobe to detect avidin with a record-low detection limit of 3.0 nM. The oxide nanoparticles also exhibit specific recognition of cancer cells overexpressed with urokinase plasminogen activator receptor (uPAR, an important marker of tumor biology and metastasis) and thus may have great potentials in targeted bioimaging.

An optical sensor for Cu(II) detection with upconverting luminescent nanoparticles as an excitation source

The first optical sensor for Cu(II) detection, with upconverting luminescent nanoparticles as an excitation source, showing high selectivity and good linear Stern-Volmer characteristics, has been achieved through a fluorescence resonance energy transfer (FRET) process between NaYF(4):Yb(3+)/Er(3+) and RB-hydrazide. The sensing mechanism is then discussed.

Core-shell Fe3O4@NaLuF4:Yb,Er/Tm nanostructure for MRI, CT and upconversion luminescence tri-modality imaging

Core-shell Fe(3)O(4)@NaLuF(4):Yb,Er/Tm nanostructure (MUCNP) with multifunctional properties has been developed using a step-wise synthetic method. The successful fabrication of MUCNP has been confirmed by transmission electron microscopy, powder X-ray diffraction, energy-dispersive X-ray analysis and X-ray photoelectron spectroscopy. The MUCNP exhibits superparamagnetic property with saturation magnetization of 15 emu g(-1), and T(2)-enhanced magnetic resonance (MR) effect with an r(2) value of 21.63 s(-1) mM(-1) at 0.5 T, resulting from the Fe(3)O(4) cores. Moreover, the NaLuF(4)-based MUCNP provides excellent X-ray attenuation and upconversion luminescence (UCL) emission under excitation at 980 nm. In vivo MR, computed tomography (CT) and UCL images of tumor-bearing mice show that the MUCNP can be successfully used in multimodal imaging. In vitro tests reveal that the MUCNP is non-cytotoxic. These results suggest that the developed MUCNP could be served as an MR, CT and UCL probe for tri-modality imaging.

Upconversion nanomaterials: synthesis, mechanism, and applications in sensing

Upconversion is an optical process that involves the conversion of lower-energy photons into higher-energy photons. It has been extensively studied since mid-1960s and widely applied in optical devices. Over the past decade, high-quality rare earth-doped upconversion nanoparticles have been successfully synthesized with the rapid development of nanotechnology and are becoming more prominent in biological sciences. The synthesis methods are usually phase-based processes, such as thermal decomposition, hydrothermal reaction, and ionic liquids-based synthesis. The main difference between upconversion nanoparticles and other nanomaterials is that they can emit visible light under near infrared irradiation. The near infrared irradiation leads to low autofluorescence, less scattering and absorption, and deep penetration in biological samples. In this review, the synthesis of upconversion nanoparticles and the mechanisms of upconversion process will be discussed, followed by their applications in different areas, especially in the biological field for biosensing.

Cubic sub-20 nm NaLuF(4)-based upconversion nanophosphors for high-contrast bioimaging in different animal species

A new upconversion luminescence (UCL) nanophosphors based on host matrix of cubic NaLuF(4) with bright luminescence have been synthesized by a solvothermal method, facilitate the nanocrystals potential candidates for imaging in vivo, especially large-animals. The sub-20 nm NaLuF(4) co-doped Yb(3+) and Er(3+) (Tm(3+)) showed about 10-fold stronger UCL emission than that of corresponding hexagonal NaYF(4)-based nanocrystals with a 20 nm diameter. Near-infrared to near-infrared (NIR-to-NIR) UCL emission of PAA-coated NaLuF(4):20%Yb,1%Tm (PAA-Lu(Tm)) can penetrate >1.5 cm tissue of pork with high contrast. Based on super-strong UCL emission and deep penetration, PAA-Lu(Tm) as optical bioprobe has been demonstrated by in vivo UCL imaging of a normal black mouse, even rabbit with excellent signal-to-noise ratio. Furthermore, such cubic NaLuF(4)-based nanophosphor was applied in lymph node imaging of live Kunming mouse with rich white fur.

Polymeric optodes based on upconverting nanorods for fluorescent measurements of pH and metal ions in blood samples

Optical thin films incorporating NaYF(4):Er,Yb upconverting nanorods and chromoionophore ETH 5418 in hydrophobic polymer matrixes have been developed for the first time to measure pH and metal ions based on the ion-exchange mechanism. The absorption spectra of protonated and unprotonated ETH 5418 overlap the two emission peaks of upconverting material, respectively, which makes the inert nanorods ion-sensitive. Optodes for pH and metal ions (Na(+), K(+), Ca(2+), and Cu(2+)) were investigated and exhibited excellent sensitivity, selectivity, and reproducibility. Because of excitation by the 980 nm laser source, detection in the near-infrared region at 656 nm, and high quantum yield of the nanorods in hydrophobic membrane, the proposed sensors have been successfully used in whole blood measurements with minimized background absorption and sample autofluorescence.