Polyamine-Tethered Porous Polymer Networks for Carbon Dioxide Capture from Flue Gas

Facile Synthesis of a Pentiptycene-Based Highly Microporous Organic Polymer for Gas Storage and Water Treatment

Rigid H-shaped pentiptycene units, with an intrinsic hierarchical structure, were employed to fabricate a highly microporous organic polymer sorbent via Friedel-Crafts reaction/polymerization. The obtained microporous polymer exhibits good thermal stability, a high Brunauer-Emmett-Teller surface area of 1604 m² g^-1, outstanding CO₂, H₂, and CH₄ storage capacities, as well as good adsorption selectivities for the separation of CO₂/N₂ and CO₂/CH₄ gas pairs. The CO₂ uptake values reached as high as 5.00 mmol g^-1 (1.0 bar and 273 K), which, along with high adsorption selectivity values (e.g., 47.1 for CO₂/N₂), make the pentiptycene-based microporous organic polymer (PMOP) a promising sorbent material for carbon capture from flue gas and natural gas purification. Moreover, the PMOP material displayed superior absorption capacities for organic solvents and dyes. For example, the maximum adsorption capacities for methylene blue and Congo red were 394 and 932 mg g^-1, respectively, promoting the potential of the PMOP as an excellent sorbent for environmental remediation and water treatment.

Molecular View of CO2 Capture by Polyethylenimine: Role of Structural and Dynamical Heterogeneity

The molecular thermodynamics and kinetics of CO₂ sorption in Polyethylenimine (PEI) melt have been investigated systematically using GCMC and MD simulations. We elucidate presence of significant structural and dynamic heterogeneity associated with the overall absorption process. CO₂ adsorption in a PEI membrane shows a distinct two-stage process of a rapid CO₂ adsorption at the interfaces (hundreds of picoseconds) followed by a significantly slower diffusion limited release toward the interior bulk regions of PEI melt (hundreds of nanoseconds to microseconds). The spatial heterogeneity of local structural features of the PEI chains lead to significantly heterogeneous absorption characterized by clustering and trapping of CO₂ molecules that then lead to subdiffusive motion of CO₂. In the complex interplay of interaction and entropy, the latter emerges out to be the major determining factor with significantly higher solubility of CO₂ near the interfaces despite having lower density of binding amine groups. Regions having higher free-volume (entropically favorable) viz. interfaces, pores and loops demonstrate higher CO₂ capture ability. Various local structural features of PEI conformations, for example, inter- and intrachain loops, pores of different radii, and di- or tricoordinated pores are explored for their effects on the varying CO₂ adsorption abilities.

Recent advances in functionalized micro and mesoporous carbon materials: synthesis and applications

Functionalized nanoporous carbon materials have attracted the colossal interest of the materials science fraternity owing to their intriguing physical and chemical properties including a well-ordered porous structure, exemplary high specific surface areas, electronic and ionic conductivity, excellent accessibility to active sites, and enhanced mass transport and diffusion. These properties make them a special and unique choice for various applications in divergent fields such as energy storage batteries, supercapacitors, energy conversion fuel cells, adsorption/separation of bulky molecules, heterogeneous catalysts, catalyst supports, photocatalysis, carbon capture, gas storage, biomolecule detection, vapour sensing and drug delivery. Because of the anisotropic and synergistic effects arising from the heteroatom doping at the nanoscale, these novel materials show high potential especially in electrochemical applications such as batteries, supercapacitors and electrocatalysts for fuel cell applications and water electrolysis. In order to gain the optimal benefit, it is necessary to implement tailor made functionalities in the porous carbon surfaces as well as in the carbon skeleton through the comprehensive experimentation. These most appealing nanoporous carbon materials can be synthesized through the carbonization of high carbon containing molecular precursors by using soft or hard templating or non-templating pathways. This review encompasses the approaches and the wide range of methodologies that have been employed over the last five years in the preparation and functionalisation of nanoporous carbon materials via incorporation of metals, non-metal heteroatoms, multiple heteroatoms, and various surface functional groups that mostly dictate their place in a wide range of practical applications.

Porous aromatic framework with mesopores as a platform for a super-efficient heterogeneous Pd-based organometallic catalysis

A strategy using a mesoporous amine-tagged porous aromatic framework (PAF70-NH₂ ) to immobilize a palladium (Pd)-based molecular catalyst has been developed. The resulting immobilized catalyst PAF70-Pd, in which the framework is entirely constructed by phenyl rings linked with stable carbon-carbon bonds, has high structural rigidity and stability. Compared with the known porous organic material immobilized Pd-based catalysts, PAF70-Pd has the highest Pd content so far. Moreover, PAF70-Pd has extremely high catalytic activity with good size selectivity and very easy recyclability in catalyzing the Suzuki-Miyaura coupling reaction. In the current system, the catalyst loading could be as low as 0.001 mol% and the TOF value could go up to 28 800 h^-1 which is far higher than those of the known porous organic material immobilized Pd-based catalysts. In order to elucidate the particularly high catalytic efficiency of PAF70-Pd, we prepared PAF1-Pd from PAF1-NH₂ for comparison. PAF1-Pd has a higher Pd content than PAF70-Pd. However, due to the absence of large enough mesopores in PAF1-NH₂ , PAF1-Pd has almost no catalytic activity under the same conditions, which definitely demonstrated that the intrinsic mesoporosity of PAF70-NH₂ plays a crucial role in the superb catalytic efficiency of PAF70-Pd. This strategy to immobilize Pd-based molecular catalysts has very good expansibility to be applied in the immobilization of different organometallic catalysts into the pores of PAFs, which also has very high potential in the chemical and pharmaceutical industry.

Template-free synthesis of porous carbon from triazine based polymers and their use in iodine adsorption and CO2 capture

A series of novel triazine-containing pore-tunable carbon materials (NT-POP@800-1-6), which was synthesized via pyrolysis of porous organic polymers (POPs) without any templates. NT-POP@800-1-6 possess moderate BET surface areas of 475-736 m2 g-1, have permanent porosity and plenty of nitrogen units in the skeletons as effective sorption sites, and display relatively rapid guest uptake of 56-192 wt% in iodine vapour in the first 4 h. In addition, all the samples exhibit the outstanding CO2 adsorption capacity of 2.83-3.96 mmol g-1 at 273 K and 1.05 bar. Furthermore, NT-POP@800-1-6 show good selectivity ratios of 21.2-36.9 and 3.3-7.5 for CO2/N2 or CH4/N2, respectively. We believe that our new building block design provides a general strategy for the construction of triazine-containing carbon materials from various extended building blocks, thereby greatly expanding the range of applicable molecules.

Adsorptive removal of p-nitrophenol from water with mechano-synthesized porous organic polymers

An environmentally friendly synthesis of porous organic polymers for removing organic pollutants from water.

Expandable porous organic frameworks with built-in amino and hydroxyl functions for CO2and CH4capture

Organic functions built on the node of a porous covalent architecture exhibit excellent affinity for CO₂(54 kJ mol⁻¹) and CH₄(25 kJ mol⁻¹): the interaction of CO₂favorably with amine groups was observed by 2D NMR.

Network-controlled unique reactivities of carbonyl groups in hollow and microporous organic polymer

Hollow and microporous organic network bearing alkynone moieties showed unusual reactivities of the carbonyl groups in post-synthetic modification.

Folate decorated hollow spheres of microporous organic networks as drug delivery materials

Hollow and microporous organic networks post-modified with folic acids showed promising potential as DOX delivery materials.

A highly stable MnII phosphonate as a highly efficient catalyst for CO2 fixation under ambient conditions

A highly stable microporous Mn^II phosphonate is rationally designed and it exhibits highly efficient performance in the context of CO₂ chemical conversion into cyclic carbonates under ambient conditions.

Uniform poly(phosphazene–triazine) porous microspheres for highly efficient iodine removal

The iodine adsorption capacity of porous organic polymers is greatly enhanced due to the extended π-conjugated units on the backbone.

Solid-State Synthesis of Conjugated Nanoporous Polycarbazoles

A novel solid-state synthetic approach has been developed for the generation of conjugated nanoporous polymer networks. Using mechanochemical-assisted oxidative coupling polymerization, we demonstrated a rapid and solvent-free synthesis of conjugated polycarbazoles with high porosities and promising CO₂ storage abilities. This innovative approach constitutes a new direction for the development of novel nanoporous polymer frameworks through sustainable solid-state assembly pathways, and may open up new possibilities for the rational design and synthesis of nanoporous materials for carbon capture.

Self-assembly of block copolymers into sieve-like particles with arrayed switchable channels and as scaffolds to guide the arrangement of gold nanoparticles

Well-defined polymeric particles with not only a controllable shape and internal nanostructures but also stimuli-responsive functions have attracted intensive attention because of their great potential in various fields. Herein, we created unique sieve-like particles with lattice arrayed switchable channels via the confined self-assembly of poly(4-vinylpyridine)-b-polystyrene-b-poly(4-vinylpyridine) (P4VP-b-PS-b-P4VP) triblock copolymers within the emulsion droplets and the subsequent swelling treatment in ethanol. It is worth noting that the hexagonally packed P4VP channels in the sieve-like particles are switched on and off by changing the solvent type, i.e., P4VP channels are switched on in ethanol and switched off in water, which can operate as a solvent-controlled chemical gate. Moreover, the well-defined sieve-like particles can be further used as scaffolds to guide the spatial arrangement of gold nanoparticles, which generates hybrid nanomaterials with controllable morphology and ordered spatial arrangement of AuNPs.

Synthesis of Size-Tunable CO2-Philic Imprinted Polymeric Particles (MIPs) for Low-Pressure CO2 Capture Using Oil-in-Oil Suspension Polymerization

Highly selective molecularly imprinted poly[acrylamide-co-(ethylene glycol dimethacrylate)] polymer particles (MIPs) for CO₂ capture were synthesized by suspension polymerization via oil-in-oil emulsion. Creation of CO₂-philic, amide-decorated cavities in the polymer matrix led to a high affinity to CO₂. At 0.15 bar CO₂ partial pressure, the CO₂/N₂ selectivity was 49 (corresponding to 91% purity of the gas stream after regeneration), and reached 97 at ultralow CO₂ partial pressures. The imprinted polymers showed considerably higher CO₂ uptakes compared to their nonimprinted counterparts, and the maximum equilibrium CO₂ capture capacity of 1.1 mmol g^-1 was achieved at 273 K. The heat of adsorption was below 32 kJ mol^-1 and the temperature of onset of intense thermal degradation was 351-376 °C. An increase in monomer-to-cross-linker molar ratio in the dispersed phase up to 1:2.5 led to a higher affinity toward CO₂ due to higher density of selective amide groups in the polymer network. MIPs are a promising option for industrial packed and fluidized bed CO₂ capture systems due to large particles with a diameter up to 1200 μm and irregular oblong shapes formed due to arrested coalescence during polymerization, occurring as a result of internal elasticity of the partially polymerized semisolid drops.

Porous Organic Polymers for Post-Combustion Carbon Capture

One of the most pressing environmental concerns of our age is the escalating level of atmospheric CO₂ . Intensive efforts have been made to investigate advanced porous materials, especially porous organic polymers (POPs), as one type of the most promising candidates for carbon capture due to their extremely high porosity, structural diversity, and physicochemical stability. This review provides a critical and in-depth analysis of recent POP research as it pertains to carbon capture. The definitions and terminologies commonly used to evaluate the performance of POPs for carbon capture, including CO₂ capacity, enthalpy, selectivity, and regeneration strategies, are summarized. A detailed correlation study between the structural and chemical features of POPs and their adsorption capacities is discussed, mainly focusing on the physical interactions and chemical reactions. Finally, a concise outlook for utilizing POPs for carbon capture is discussed, noting areas in which further work is needed to develop the next-generation POPs for practical applications.

BILP-19-An Ultramicroporous Organic Network with Exceptional Carbon Dioxide Uptake

Porous benzimidazole-based polymers (BILPs) have proven to be promising for carbon dioxide capture and storage. The polarity of their chemical structure in combination with an inherent porosity allows for adsorbing large amounts of carbon dioxide in combination with high selectivities over unpolar guest molecules such as methane and nitrogen. For this reason, among purely organic polymers, BILPs contain some of the most effective networks to date. Nevertheless, they are still outperformed by competitive materials such as metal-organic frameworks (MOFs) or metal doped porous polymers. Here, we report the synthesis of BILP-19 and its exceptional carbon dioxide uptake of up to 6 mmol•g-1 at 273 K, making the network comparable to state-of-the-art materials. BILP-19 precipitates in a particulate structure with a strongly anisotropic growth into platelets, indicating a sheet-like structure for the network. It exhibits only a small microporous but a remarkable ultra-microporous surface area of 144 m2•g-1 and 1325 m2•g-1, respectively. We attribute the exceptional uptake of small guest molecules such as carbon dioxide and water to the distinct ultra-microporosity. Additionally, a pronounced hysteresis for both guests is observed, which in combination with the platelet character is probably caused by an expansion of the interparticle space, creating additional accessible ultra-microporous pore volume. For nitrogen and methane, this effect does not occur which explains their low affinity. In consequence, Henry selectivities of 123 for CO2/N2 at 298 K and 12 for CO2/CH4 at 273 K were determined. The network was carefully characterized with solid-state nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy, thermal gravimetry (TG) and elemental analyses as well as physisorption experiments with Ar, N2, CO2, CH4 and water.

Bulky Isopropyl Group Loaded Tetraaryl Pyrene Based Azo-Linked Covalent Organic Polymer for Nitroaromatics Sensing and CO2 Adsorption

An azo-linked covalent organic polymer, Py-azo-COP, was synthesized by employing a highly blue-fluorescent pyrene derivative that is multiply substituted with bulky isopropyl groups. Py-azo-COP was investigated for its sensing and gas adsorption properties. Py-azo-COP shows selective sensing toward the electron-deficient polynitroaromatic compound picric acid among the many other competing analogs that were investigated. Apart from its chemosensing ability, Py-azo-COP (surface area 700 m2 g-1) exhibits moderate selectivity toward adsorption of CO2 and stores up to 8.5 wt % of CO2 at 1 bar and 18.2 wt % at 15.5 bar at 273 K, although this is limited due to the electron-rich -N=N- linkages being flanked by isopropyl groups. Furthermore, the presence of a large number of isopropyl groups imparts hydrophobicity to Py-azo-COP, as confirmed by the increased adsorption of toluene compared to that of water in the pores of the COP.

Mesoporous organo-inorganic hybrid materials as hydrogenation catalysts

The paper concerns application of two types of organic materials – porous aromatic frameworks (PAFs) with diamond-like structure and the ordered mesoporous phenol-formaldehyde polymers (MPFs) – as supports for metal and metal sulfide nanoparticles. The obtained hybrid materials were tested in hydrogenation of various unsaturated and aromatic compounds. Ruthenium catalyst, based on PAF (Ru-PAF-30), possessed high activity in exhaustive hydrogenation of phenol into cyclohexanol with TOF value of 2700 h−1. Platinum catalyst, based on modified with sulfo-groups MPF (MPF-SO3H-Pt), was selective in semi-hydrogenation of terpenes, [α-terpinene, γ-terpinene, terpinolene, (s)-limonene]. Bimetallic Ni–W sulfide catalysts, prepared by in situ decomposition of [(n-Bu)4N]2Ni(WS4)2 within the pores of MPFs and PAFs, possessed high efficiency in hydrogenation-hydrocracking of naphthalenes as model substrates.

Linking Silica Support Morphology to the Dynamics of Aminopolymers in Composites

A combined computational and experimental approach is used to elucidate the effect of silica support morphology on polymer dynamics and CO₂ adsorption capacities in aminopolymer/silica composites. Simulations are based on coarse-grained molecular dynamics simulations of aminopolymer composites where a branched aminopolymer, representing poly(ethylenimine) (PEI), is impregnated into different silica mesoporous supports. The morphology of the mesoporous supports varies from hexagonally packed cylindrical pores representing SBA-15, double gyroids representing KIT-6 and MCM-48, and cagelike structures representing SBA-16. In parallel, composites of PEI and the silica supports SBA-15, KIT-6, MCM-48, and SBA-16 are synthesized and characterized, including measuring their CO₂ uptake. Simulations predict that a 3D pore morphology, such as those of KIT-6, MCM-48, and SBA-16, will have faster segmental mobility and have lower probability of primary amine and surface silanol associations, which should translate to higher CO₂ uptake in comparison to a 2D pore morphology such as that of SBA-15. Indeed, it is found that KIT-6 has higher CO₂ uptake than SBA-15 at equivalent PEI loading, even though both supports have similar surface area and pore volume. However, this is not the case for the MCM-48 support, which has smaller pores, and SBA-16, whose pore structure rapidly degrades after PEI impregnation.

Porous MOF with Highly Efficient Selectivity and Chemical Conversion for CO2

A new Co(II)-based MOF, {[Co₂(tzpa)(OH)(H₂O)₂]·DMF}_n (1) (H₃tzpa = 5-(4-(tetrazol-5-yl)phenyl)isophthalic acid), was constructed by employing a tetrazolyl-carboxyl ligand H₃tzpa. 1 possesses 1D tubular channels that are decorated by μ₃-OH groups, uncoordinated carboxylate O atoms, and open metal centers generated by the removal of coordinated water molecules, leading to high CO₂ adsorption capacity and significantly selective capture for CO₂ over CH₄ and CO in the temperature range of 298-333 K. Moreover, 1 shows the chemical stability in acidic and basic aqueous solutions. Grand canonical Monte Carlo simulations identified multiple CO₂-philic sites in 1. In addition, the activated 1 as the heterogeneous Lewis and Brønsted acid bifunctional catalyst facilitates the chemical fixation of CO₂ coupling with epoxides into cyclic carbonates under ambient conditions.

Direct Access to Primary Amines and Particle Morphology Control in Nanoporous CO2 Sorbents

Chemical tuning of nanoporous, solid sorbents for ideal CO₂ binding requires unhindered amine functional groups on the pore walls. Although common for soluble organics, post-synthetic reduction of nitriles in porous networks often fails due to insufficient and irreversible metal hydride penetration. In this study, a nanoporous network with pendant nitrile groups, microsphere morphology was synthesized in large scale. The hollow microspheres were easily decorated with primary amines through in situ reduction by widely available boranes. The CO₂ capture capacity of the modified sorbent was increased to up to four times that of the starting nanoporous network with a high heat of adsorption (98 kJ mol^-1 ). The surface area can be easily tuned between 1 and 354 m²  g^-1 . The average particle size (ca. 50 μm) is also quite suitable for CO₂ capture applications, such as those with fluidized beds requiring spheres of micron sizes.

Highly effective ammonia removal in a series of Brønsted acidic porous polymers: investigation of chemical and structural variations

Efficient removal of ammonia from air is demonstrated in a series of Brønsted acidic porous polymers under dry and humid conditions. The impact of acidic group strength and their spatial distribution on the ammonia uptake is investigated systematically.

Although a widely used and important industrial gas, ammonia (NH₃) is also highly toxic and presents a substantial health and environmental hazard. The development of new materials for the effective capture and removal of ammonia is thus of significant interest. The capture of ammonia at ppm-level concentrations relies on strong interactions between the adsorbent and the gas, as demonstrated in a number of zeolites and metal–organic frameworks with Lewis acidic open metal sites. However, these adsorbents typically exhibit diminished capacity for ammonia in the presence of moisture due to competitive adsorption of water and/or reduced structural stability. In an effort to overcome these challenges, we are investigating the performance of porous polymers functionalized with Brønsted acidic groups, which should possess inherent structural stability and enhanced reactivity towards ammonia in the presence of moisture. Herein, we report the syntheses of six different Brønsted acidic porous polymers exhibiting –NH₃Cl, –CO₂H, –SO₃H, and –PO₃H₂ groups and featuring two different network structures with respect to interpenetration. We further report the low- and high-pressure NH₃ uptake in these materials, as determined under dry and humid conditions using gas adsorption and breakthrough measurements. Under dry conditions, it is possible to achieve NH₃ capacities as high as 2 mmol g^–1 at 0.05 mbar (50 ppm) equilibrium pressure, while breakthrough saturation capacities of greater than 7 mmol g^–1 are attainable under humid conditions. Chemical and structural variations deduced from these measurements also revealed an important interplay between acidic group spatial arrangement and NH₃ uptake, in particular that interpenetration can promote strong adsorption even for weaker Brønsted acidic functionalities. In situ infrared spectroscopy provided further insights into the mechanism of NH₃ adsorption, revealing a proton transfer between ammonia and acidic sites as well as strong hydrogen bonding interactions in the case of the weaker carboxylic acid-functionalized polymer. These findings highlight that an increase of acidity or porosity does not necessarily correspond directly to increased NH₃ capacity and advocate for the development of more fine-tuned design principles for efficient NH₃ capture under a range of concentrations and conditions.

Promoting and Tuning Porosity of Flexible Ether-Linked Phthalazinone-Based Covalent Triazine Frameworks Utilizing Substitution Effect for Effective CO2 Capture

Five porous ether-linked phthalazinone-based covalent triazine frameworks (PHCTFs) were successfully constructed via ionothermal polymerizations from flexible dicyano monomers containing asymmetric, twisted, and N-heterocyclic phthalazinone structure. All the building blocks could be easily prepared by simple and low-cost aromatic nucleophilic substitution reactions, showing the large-scale application potential of thermal stable phthalazinone structure in constructing porous materials. Generally, the flexible building blocks are avoided to prevent the networks from collapsing in constructing high surface area porous materials. Our experimental results revealed that the introduction of the substituents can effectively decrease the probability of the network interpenetration from the longer struts and the intermolecular/intramolecular intercalation from the increased degree of conformation freedom in the flexible ether-linkage, the BET surface areas of PHCTFs increasing from 676 to 1270 m² g^-1. Meanwhile, the effects of introducing different sizes (methyl or phenyl group) and amounts (one or two) of substituents on the porosities of the target polymer networks were also investigated in detail. The high CO₂ adsorption capacity of 10.3 wt % (273 K, 1 bar) can be ascribed to the strong affinity of the electron-rich N,O-containing networks with CO₂. Excitingly, PHCTF-5 demonstrates the high CO₂/N₂ selectivity up to 138 (273 K, 1 bar), according to the ideal adsorbed solution theory (IAST) for the higher proportion of V_micro accompanied the electron-rich heteroatoms characteristic. Such high CO₂ adsorption capacity and good separation properties are superior to those of many other microporous organic polymers. These properties along with easily up-scalable synthesis make porous PHCTFs promising candidates applied in gas sorption and separation field.

Carbon Dioxide Capture Adsorbents: Chemistry and Methods

Excess carbon dioxide (CO₂ ) emissions and their inevitable consequences continue to stimulate hard debate and awareness in both academic and public spaces, despite the widespread lack of understanding on what really is needed to capture and store the unwanted CO₂ . Of the entire carbon capture and storage (CCS) operation, capture is the most costly process, consisting of nearly 70 % of the price tag. In this tutorial review, CO₂ capture science and technology based on adsorbents are described and evaluated in the context of chemistry and methods, after briefly introducing the current status of CO₂ emissions. An effective sorbent design is suggested, whereby six checkpoints are expected to be met: cost, capacity, selectivity, stability, recyclability, and fast kinetics.

Regulating the topology of 2D covalent organic frameworks by the rational introduction of substituents

Regulating the topology of 2D COFs has been achieved by introducing alkyl substituents into the skeleton of a parent monomer, which led to the formation of a dual-pore COF or single-pore COFs, depending on the sizes of the substituents.

The topology of a covalent organic framework (COF) is generally believed to be dictated by the symmetries of the monomers used for the condensation reaction. In this context, the use of monomers with different symmetries is usually required to afford COFs with different topologies. Herein, we report a conceptual strategy to regulate the topology of 2D COFs by introducing alkyl substituents into the skeleton of a parent monomer. The resulting monomers, sharing the same C₂ symmetry, were assembled with a D_2h symmetric tetraamine to generate a dual-pore COF or single-pore COFs, depending on the sizes of the substituents, which were evidenced using PXRD studies and pore size distribution analyses. These results demonstrate that the substituent is able to exert a significant influence on the topology of COFs, which is crucial for their application.

Fine-Tuning of the Carbon Dioxide Capture Capability of Diamine-Grafted Metal-Organic Framework Adsorbents Through Amine Functionalization

A combined sonication and microwave irradiation procedure provides the most effective functionalization of ethylenediamine (en) and branched primary diamines of 1-methylethylenediamine (men) and 1,1-dimethylethylenediamine (den) onto the open metal sites of Mg₂ (dobpdc) (1). The CO₂ capacities of the advanced adsorbents 1-en and 1-men under simulated flue gas conditions are 19 wt % and 17.4 wt %, respectively, which are the highest values reported among amine-functionalized metal-organic frameworks (MOFs) to date. Moreover, 1-den exhibits both a significant working capacity (12.2 wt %) and superb CO₂ uptake (11 wt %) at 3 % CO₂ . Additionally, this framework showcases the superior recyclability; ultrahigh stability after exposure to O₂ , moisture, and SO₂ ; and exceptional CO₂ adsorption capacity under humid conditions, which are unprecedented among MOFs. We also elucidate that the performance of CO₂ adsorption can be controlled by the structure of the diamine ligands grafted such as the number of amine end groups or the presence of side groups, which provides the first systematic and comprehensive demonstration of fine-tuning of CO₂ uptake capability using different amines.