The three-dimensional structure of porin from Rhodobacter capsulatus at 3 A resolution

Ponticulin is an atypical membrane protein

We have cloned and sequenced ponticulin, a 17,000-dalton integral membrane glycoprotein that binds F-actin and nucleates actin assembly. A single copy gene encodes a developmentally regulated message that is high during growth and early development, but drops precipitously during cell streaming at approximately 8 h of development. The deduced amino acid sequence predicts a protein with a cleaved NH2-terminal signal sequence and a COOH-terminal glycosyl anchor. These predictions are supported by amino acid sequencing of mature ponticulin and metabolic labeling with glycosyl anchor components. Although no alpha-helical membrane-spanning domains are apparent, several hydrophobic and/or sided beta-strands, each long enough to traverse the membrane, are predicted. Although its location on the primary sequence is unclear, an intracellular domain is indicated by the existence of a discontinuous epitope that is accessible to antibody in plasma membranes and permeabilized cells, but not in intact cells. Such a cytoplasmically oriented domain also is required for the demonstrated role of ponticulin in binding actin to the plasma membrane in vivo and in vitro (Hitt, A. L., J. H. Hartwig, and E. J. Luna. 1994. Ponticulin is the major high affinity link between the plasma membrane and the cortical actin network in Dictyostelium. J. Cell Biol. 126:1433-1444). Thus, ponticulin apparently represents a new category of integral membrane proteins that consists of proteins with both a glycosyl anchor and membrane-spanning peptide domain(s).

Design and chemical synthesis of a neoprotein structural model for the cytoplasmic domain of a multisubunit cell-surface receptor: integrin alpha IIb beta 3 (platelet GPIIb-IIIa)

Integrins are a class of heterodimeric cell adhesion receptors involved in cell migration, cell anchorage, and cell-cell interactions. The cytoplasmic domains of integrins are of key importance in these activities. We have designed and chemically synthesized a 126 amino acid model protein (MP-1) containing both cytoplasmic tails of the platelet-derived integrin alpha IIb beta 3 covalently linked via a helical coiled coil. The coiled-coil tertiary structure was incorporated to mimic the membrane-spanning domain of the integrin and to act as a topological constraint fixing the two cytoplasmic tails in a parallel arrangement. This molecule, which contains two C-termini, was constructed by chemical dovetailing. The bromoacetylated and cysteinyl peptide synthons were unambiguously ligated through the formation of a thioether linkage. Ultraviolet circular dichroism (CD) spectroscopy has been performed on MP-1 and related compounds, confirming that a helical coiled coil is present within the MP-1 molecule. Significantly, the helicity apparently extends beyond the predicted amphiphilic region of MP-1. Fluorescence measurements suggest that a defined tertiary structure has formed by the association of the two cytoplasmic domains. We conclude that this is a practical design strategy for the study of the cytoplasmic domain of multisubunit cell-surface receptors.

Specificity and promiscuity in membrane helix interactions

The membrane-spanning portions of many integral membrane proteins consist of one or a number of transmembrane α-helices, which are expected to be independently stable on thermodynamic grounds. Side-by-side interactions between these transmembrane α-helices are important in the folding and assembly of such integral membrane proteins and their complexes. In considering the contribution of these helix–helix interactions to membrane protein folding and oligomerization, a distinction between the energetics and specificity should be recognized. A number of contributions to the energetics of transmembrane helix association within the lipid bilayer will be relatively non-specific, including those resulting from charge–charge interactions and lipid–packing effects. Specificity (and part of the energy) in transmembrane α-helix association, however, appears to rely mainly upon a detailed stereochemical fit between sets of dynamically accessible states of particular helices. In some cases, these interactions are mediated in part by prosthetic groups.

NMR observation of substrate in the binding site of an active sugar-H+ symport protein in native membranes

NMR methods have been adopted to observe directly the characteristics of substrate binding to the galactose-H+ symport protein GalP, in its native environment, the inner membranes of Escherichia coli. Sedimented inner-membrane vesicles containing the GalP protein, overexpressed to levels above 50% of total protein, were analyzed by 13C magic-angle spinning NMR, when in their normal "fluid" state and with incorporated D-[1-13C]glucose. Using conditions of cross-polarization intended to discriminate bound substrate alone, it was possible to detect as little as 250 nmol of substrate added to the membranes containing about 0.5 mumol (approximately 26 mg) of GalP protein. Such high measuring sensitivity was possible from the fluid membranes by virtue of their motional contributions to rapid relaxation recovery of the observed nuclei and due to a high-resolution response that approached the static field inhomogeneity in these experiments. This good spectral resolution showed that the native state of the membranes presents a substrate binding environment with high structural homogeneity. Inhibitors of the GalP protein, cytochalasin B and forskolin, which are specific, and D-galactose, but not L-galactose, prevent or suppress detection of the 13C-labeled glucose substrate, confirming that the observed signal was due to specific interactions with the GalP protein. This specific substrate binding exhibits a preference for the beta-anomer of D-glucose and substrate translocation is determined to be slow, on the 10(-2) s time scale. The work describes a straightforward NMR approach, which achieves high sensitivity, selectivity, and resolution for nuclei associated with complex membrane proteins and which may be combined with other NMR methodologies to yield additional structural information on the binding site for the current transport system without isolating it from its native membrane environment.

Influence of the lipid matrix on incorporation and function of LPS-free porin from Paracoccus denitrificans

We have studied the role of lipopolysaccharide (LPS) for the insertion of LPS-free porin from Paracoccus denitrificans into planar lipid bilayers and its function therein. For this, we reconstituted the porin into different asymmetric planar lipid bilayers with or without LPS and into symmetric phospholipid bilayers. LPS-free porin added to the various bilayer systems was found to induce a step-wise increase in membrane conductance with different incorporation rates, depending on the presence of LPS in the bilayer leaflet opposite to porin addition. The incorporation rate into asymmetric LPS/phospholipid membranes from the phospholipid side was more than 10-fold higher than that observed for pure phospholipid membranes. The porin formed general diffusion pores without any salt specificity. The mean single-channel conductance did not depend on the presence of LPS and was about 4.2 nS for a subphase containing 1 M KCl in all systems tested. At certain applied transmembrane voltages, which depended on membrane composition and were approximately greater than 100 mV for the LPS/phospholipid system, single-channel closing in three steps was observed. Differences in the voltage dependence of porin-channel closing could be correlated with the surface charge of the bilayer. From the voltage-dependent gating behaviour proof for an oriented incorporation of the porin molecules, depending on the side of porin addition, and evidence for their orientation could be derived. Measurements at temperatures above and below the beta<==>alpha phase transition temperature of LPS gave evidence for the influence of membrane rigidity on the gating behaviour.

Structure of the membrane channel porin from Rhodopseudomonas blastica at 2.0 A resolution

The crystal structure of a membrane channel, homotrimeric porin from Rhodopseudomonas blastica has been determined at 2.0 A resolution by multiple isomorphous replacement and structural refinement. The current model has an R-factor of 16.5% and consists of 289 amino acids, 238 water molecules, and 3 detergent molecules per subunit. The partial protein sequence and subsequently the complete DNA sequence were determined. The general architecture is similar to those of the structurally known porins. As a particular feature there are 3 adjacent binding sites for n-alkyl chains at the molecular 3-fold axis. The side chain arrangement in the channel indicates a transverse electric field across each of the 3 pore eyelets, which may explain the discrimination against nonpolar solutes. Moreover, there are 2 significantly ordered girdles of aromatic residues at the nonpolar/polar borderlines of the interface between protein and membrane. Possibly, these residues shield the polypeptide conformation against adverse membrane fluctuations.

Mechanisms of TonB-catalyzed iron transport through the enteric bacterial cell envelope

The recent solution of enteric bacterial porin structure, and new insights into the mechanism by which outer membrane receptor proteins recognize and internalize specific ligands, advocates the re-evaluation of TonB-dependent transport physiology. In this minireview we discuss the potential structural features of siderophore receptors and TonB, and use this analysis to evaluate both existing and new models of energy and signal transduction from the inner membrane to the outer membrane of gram-negative bacteria.

Bacterial porins: structure and function

Within the class of integral membrane proteins, the bacterial porins display a remarkable resistance to denaturants and proteases. This stability is probably crucial for the formation of highly ordered, three-dimensional crystals. Structural analysis of these crystals has been possible in atomic detail. This analysis has revealed interesting features, such as the aromatic girdles, and has helped to explain several observations, including the porins' ability to discriminate between polar and non-polar solutes. Recent research has thus improved our understanding of the porins in a qualitative fashion.

Flux, coupling, and selectivity in ionic channels of one conformation

Ions crossing biological membranes are described as a concentration of charge flowing through a selective open channel of one conformation and analyzed by a combination of Poisson and Nernst-Planck equations and boundary conditions, called the PNP theory for short. The ion fluxes in this theory interact much as ion fluxes interact in biological channels and mediated transporters, provided the theoretical channel contains permanent charge and has selectivity created by (electro-chemical) resistance at its ends. Interaction occurs because the flux of different ionic species depends on the same electric field. That electric field is a variable, changing with experimental conditions because the screening (i.e., shielding) of the permanent charge within the channel changes with experimental conditions. For example, the screening of charge and the shape of the electric field depend on the concentration of all ionic species on both sides of the channel. As experimental interventions vary the screening, the electric field varies, and thus the flux of each ionic species varies conjointly, and is, in that sense, coupled. Interdependence and interaction are the rule, independence is the exception, in this channel.

Orientation of porin channels in the outer membrane of Bordetella pertussis

We have examined the surface topography and channel connectivity of a naturally crystalline porin that is known to be functional, and whose structure has not been perturbed by detergent extraction. A three-dimensional density map, calculated from two independent tilt series of negatively stained cell envelopes, reveals three separate channels per trimer on one side (the 'smooth' side), and a single common opening at the other ('rough') side. This arrangement is consistent with the molecular structures recently determined at high resolution by X-ray crystallography for three other porins after detergent solubilization, and implies that the Bordetella pertussis porin may have the same kind of folding. Surface relief maps calculated from electron micrographs of cell envelopes contrasted by unidirectional shadowing clearly show that the side with single opening (i.e. the rough side) represents the external surface.

Rhs elements of Escherichia coli K-12: complex composites of shared and unique components that have different evolutionary histories

The complete sequences of the RhsB and RhsC elements of Escherichia coli K-12 have been determined. These sequence data reveal a new repeated sequence, called H-rpt (Hinc repeat), which is distinct from the Rhs core repetition that is found in all five Rhs elements. H-rpt is found in RhsB, RhsC, and RhsE. Characterization of H-rpt supports the view that the Rhs elements are composite structures assembled from components with very different evolutionary histories and that their incorporation into the E. coli genome is relatively recent. In each case, H-rpt is found downstream from the Rhs core and is separated from the core by a segment of DNA that is unique to the individual element. The H-rpt's of RhsB and RhsE are very similar, diverging by only 2.1%. They are 1,291 bp in length, and each contains an 1,134-bp open reading frame (ORF). RhsC has three tandem copies of H-rpt, all of which appear defective in that they are large deletions and/or have the reading frame interrupted. Features of H-rpt are analogous to features typical of insertion sequences; however, no associated transposition activity has been detected. A 291-bp fragment of H-rpt is found near min 5 of the E. coli K-12 map and is not associated with any Rhs core homology. The complete core sequences of RhsB and RhsC have been compared with that of RhsA. As anticipated, the three core sequences are closely related, all having identical lengths of 3,714 bp each. Like RhsA, the RhsB and RhsC cores constitute single ORFs that begin with the first core base. In each case, the core ORF extends beyond the core into the unique sequence. Of the three cores, RhsB and RhsA are the most similar, showing only 0.9% sequence divergence, while RhsB and RhsC are the least similar, diverging by 2.9%. All three cores conserve the 28 repetitions of a peptide motif noted originally for RhsA. A secondary structure is proposed for this motif, and the possibility of its having an extracellular binding function is discussed. RhsB contains one additional unique ORF, and RhsC contains two additional unique ORFs. One of these ORFs includes a signal peptide that is functional when fused to TnphoA.

A novel purification of ferric citrate receptor (FecA) from Escherichia coli UT5600 and further characterization of its binding activity

In our earlier paper, it was demonstrated that the FecA receptor protein from Escherichia coli UT5600/pBB2 (leu-, proC-, trpE-, entA-, rpsl-, delta (ompT-fepA)-/Ampr, fepA) binds with ferric enterobactin. In order to explore this further the outer membrane receptor protein, FecA, has been isolated from UT5600 (fepA-) and purified to homogeneity by DE-52-cellulose anion exchange chromatography followed by MonoPFPLC chromatofocusing. Partially purified FecA and homogeneous FecA show binding activity to [55Fe]ferric enterobactin and the binding is specific. Binding activity of FecA can be enhanced by ferric citrate. Lipopolysaccharide-free FecA as ascertained by silver staining and the endotoxin test still retains the same activity. In vivo uptake studies using different strains of E. coli suggest that FecA in E. coli plays an important role in ferrienterobactin transport.

Characterization of the Salmonella typhimurium phoE gene and development of Salmonella-specific DNA probes

In Escherichia coli K-12, the phoE gene, encoding a phosphate-limitation-inducible outer membrane pore protein (PhoE), is closely linked to the genes proA and proB. When the corresponding fragment of the Salmonella typhimurium chromosome was transferred to E. coli K-12 using an RP4::miniMu plasmid, pULB113, no production of S. typhimurium PhoE could be detected. Nevertheless, DNA hybridization studies revealed that the corresponding plasmid did contain S. typhimurium phoE. Production of S. typhimurium PhoE in E. coli was detected only after subcloning the gene in a multicopy vector. Nucleotide (nt) sequence analysis showed extensive homology of S. typhimurium phoE to the E. coli gene and suggested possible explanations for the low expression of S. typhimurium phoE in E. coli. In addition, the sequence information was used to develop Salmonella-specific DNA probes. Two oligodeoxyribonucleotides were synthesized based on nt sequences encoding the fifth and eighth cell-surface-exposed regions of PhoE. When used in polymerase chain reactions, these probes turned out to be specific, i.e., no crossreactions occurred with the non-Salmonella strains, whereas 132 out of 133 tested Salmonella strains were recognized.

Formation of a gated channel by a ligand-specific transport protein in the bacterial outer membrane

The ferric enterobactin receptor (FepA) is a high-affinity ligand-specific transport protein in the outer membrane of Gram-negative bacteria. Deletion of the cell-surface ligand-binding peptides of FepA generated mutant proteins that were incapable of high-affinity uptake but that instead formed nonspecific, passive channels in the outer membrane. Unlike native FepA, these pores acted independently of the accessory protein TonB, which suggests that FepA is a gated porin and that TonB acts as its gatekeeper by facilitating the entry of ligands into the FepA channel. The sequence homology among TonB-dependent proteins suggests that all ligand-specific outer membrane receptors may function by this gated-porin mechanism.

Structure of porin refined at 1.8 A resolution

The crystal structure of porin from Rhodobacter capsulatus has been refined using the simulated annealing method. The final model consists of all 301 amino acid residues well obeying standard geometry, three calcium ions, 274 solvent molecules, three detergent molecules and one unknown ligand modeled as a detergent molecule. The final crystallographic R-factor is 18.6% based on 42,851 independent reflections in the resolution range 10 to 1.8 A. The model is described in detail.

Crystal structures explain functional properties of two E. coli porins

Porins form aqueous channels that aid the diffusion of small hydrophilic molecules across the outer membrane of Gram-negative bacteria. The crystal structures of matrix porin and phosphoporin both reveal trimers of identical subunits, each subunit consisting of a 16-stranded anti-parallel beta-barrel containing a pore. A long loop inside the barrel contributes to a constriction of the channel where the charge distribution affects ion selectivity. The structures explain at the molecular level functional characteristics and their alterations by known mutations.

In vitro activation of the Serratia marcescens hemolysin through modification and complementation

The hemolytic activity of Serratia marcescens is determined by two polypeptides, termed ShlA and ShlB. ShlA is synthesized as an inactive precursor (ShlA*) and secreted with the help of ShlB, which is located in the outer membrane. In this study, it is shown that a cell lysate containing ShlB as well as partially purified ShlB converted ShlA* to the active ShlA hemolysin. ShlA remained active after removal of ShlB by column chromatography. In contrast to the stable modification of ShlA* by ShlB, a reversible activation was achieved by adding to ShlA* an N-terminal fragment of ShlA (ShlA16), consisting of 269 amino acid residues of ShlA and 18 residues of the vector. The nonhemolytic ShlA16 complemented ShlA* only when it was synthesized in an ShlB-producing cell. A deletion derivative of ShlA*, lacking residues 4 to 117, was complemented by ShlA16 but not activated by ShlB. Activation of ShlA* by ShlB at 4 degrees C proceeded at a much slower rate than complementation by ShlA16. It is concluded that ShlA* is modified by ShlB. ShlA16 modified by ShlB complements the missing modification of ShlA* in trans. Modification by ShlB occurs in the N-terminal part of ShlA*, which is also the reaction in vivo which results in active ShlA hemolysin in the culture supernatant. The HpmA hemolysin of Proteus mirabilis, which is very similar to ShlA, was also activated in vitro by ShlB and complemented by ShlA16.

The 'ins' and 'outs' of mitochondrial membrane channels

The outer membrane of the mitochondrion contains thousands of copies of a pore-forming protein called VDAC or porin. Considerable progress has been made towards elucidating the molecular structure of this channel. Moreover, mounting evidence that the permeability of VDAC may be regulated is challenging the textbook notion of the outer membrane as a simple sieve. Numerous other channel activities have been detected by electrophysiol approaches in both the outer and inner mitochondrial membranes. The inner-membrane channels do not appear to be open under normal physiological conditions and so should not dissipate energy-transducing ion gradients. The biological functions of the different classes of mitochondrial channels are uncertain, but several possibilities (including protein translocation) are being explored.

DNA sequence analysis of the lamB gene from Klebsiella pneumoniae: implications for the topology and the pore functions in maltoporin

We have determined the sequence of the lamB gene from Klebsiella pneumoniae. It encodes the precursor to the LamB protein, a 429 amino acid polypeptide with maltoporin function. Comparison with the Escherichia coli LamB protein reveals a high degree of homology, with 325 residues strictly identical. The N-terminal third of the protein is the most conserved part of the molecule (1 change in the signal sequence, and 13 changes up to residue 146 of the mature protein). Differences between the two mature proteins are clustered mainly in six regions comprising residues 145-167, 173-187, 197-226, 237-300, 311-329, and 367-387 (K. pneumoniae LamB sequence). The most important changes were found in regions predicted by the two-dimensional model of LamB folding to form loops on the cell surface. In vivo maltose and maltodextrin transport properties of E. coli K12 and K. pneumoniae strains were identical. However, none of the E. coli K12 LamB-specific phages was able to plaque onto K. pneumoniae. Native K. pneumoniae LamB protein forms highly stable trimers. The protein could be purified by affinity chromatography on starch-Sepharose as efficiently as the E. coli K12 LamB protein, indicating a conservation of the binding site for dextrins. However, none of the monoclonal antibodies directed against native E. coli K12 LamB protein recognized native purified K. pneumoniae LamB protein. These data indicate that most of the variability occurs within exposed regions of the protein and provide additional support for the proposed model of LamB folding.(ABSTRACT TRUNCATED AT 250 WORDS)

Topology of the anion-selective porin Omp32 from Comamonas acidovorans

Limited proteolysis experiments were performed with outer membranes from Comamonas acidovorans to probe the topology of its major protein component, the anion-selective porin Omp32. Proteinase K treatment above a critical temperature of 42 degrees C cleaved the surface-exposed regions of the porin, yielding membrane-embedded fragments which were separated by SDS polyacrylamide gel electrophoresis or reversed phase chromatography. The identification of the proteinase K-sensitive sites was performed by microsequencing. This allowed us to determine six surface-exposed sites of the porin, all located in nonconserved primary structure regions. These results along with the previously determined amino acid sequence and in conjunction with some structural constraints applicable to porins allowed us to propose a chain-folding model of the Omp32 porin. The features of our model are compared with the structure of the Rhodobacter capsulatus porin, recently established by X-ray crystallography (Weiss et al., 1991) and they are used to elucidate the structural basis of the anion selectivity.

Investigation of the selectivity of maltoporin channels using mutant LamB proteins: mutations changing the maltodextrin binding site

Wild-type and seven mutant maltoporins were purified and their channel-forming activities studied after reconstitution into black lipid membranes. The proteins were assayed for alterations at the maltodextrin binding site by measuring the sugar-dependent blockage of ion flux through these channels. Some substitutions (R8H, W74R) caused reduced channel affinity for all maltodextrins without changing single channel conductivities. The channel with a GlySer insertion after residue 9 was also poorly blocked by sugars but unique to this protein, the channel showed a striking, almost exponential increase of affinity with increasing maltodextrin chain length. In mutants with AspPro insertions after residues 79 and 183, there was an increase in affinity for glucose and maltose but not longer maltodextrins. The additional negative charge in the AspPro insertion mutants increased the cation selectivity of maltoporin channels, as did the decrease in positive charge resulting from the R8H substitution. A mutant with a W120C substitution also showed an increased affinity for glucose and maltose but reduced affinity for longer maltosaccharides. In contrast, a Y118F substitution resulted in an 8-fold increase in maltotriose affinity, but lesser improvements for other sugars. These results are interpreted to reflect changes in subsites contributing to an extended binding site within the channel, which in turn determines the overall sugar affinity of maltoporin.

Structural relatedness of enteric bacterial porins assessed with monoclonal antibodies to Salmonella typhimurium OmpD and OmpC

The immunochemistry and structure of enteric bacterial porins are critical to the understanding of the immune response to bacterial infection. We raised 41 monoclonal antibodies (MAbs) to Salmonella typhimurium OmpD and OmpC porin trimers and monomers. Enzyme-linked immunosorbent assays, immunoprecipitations, and/or Western immunoblot techniques indicated that 39 MAbs (11 anti-trimer and 28 anti-monomer) in the panel are porin specific and one binds to the lipopolysaccharide; the specificity of the remaining MAb probably lies in the porin-lipopolysaccharide complex. Among the porin-specific MAbs, 10 bound cell-surface-exposed epitopes, one reacted with a periplasmic epitope, and the remaining 28 recognized determinants that are buried within the outer membrane bilayer. Many of the MAbs reacting with surface-exposed epitopes were highly specific, recognizing only the homologous porin trimers; this suggests that the cell-surface-exposed regions of porins tends to be quite different among S. typhimurium OmpF, OmpC, and OmpD porins. Immunological cross-reaction showed that S. typhimurium OmpD was very closely related to Escherichia coli NmpC and to the Lc porin of bacteriophage PA-2. Immunologically, E. coli OmpG and protein K also appear to belong to the family of closely related porins including E. coli OmpF, OmpC, PhoE, and NmpC and S. typhimurium OmpF, OmpC, and OmpD. It appears, however, that S. typhimurium "PhoE" is not closely related to this group. Finally, about one-third of the MAbs that presumably recognize buried epitopes reacted with porin domains that are widely conserved in 13 species of the family Enterobacteriaceae, but apparently not in the seven nonenterobacterial species tested. These data are evaluated in relation to host immune response to infection by gram-negative bacteria.

Determination of the number of polypeptide subunits in a functional VDAC channel from Saccharomyces cerevisiae

Genes encoding VDAC proteins containing specific site-directed amino acid alterations were introduced into wild-type Saccharomyces cerevisiae. The mutant VDAC proteins form channels with ion selectivities very different from that of the wild-type channel. Therefore, the resulting yeast strains express two different genes capable of coding for functional, yet distinct, VDAC channels. If VDAC were an oligomeric channel, analysis of VDAC from these strains should have revealed not only the presence of channels with wild-type or mutant selectivity but also channels with intermediate selectivities. While channels with wild-type and mutant selectivities were observed with approximately equal frequency, no channels with intermediate selectivity were observed. Sufficient observations were performed with two different mutant genes K61E.K65E and K19E.K61E) that the likelihood of having missed hybrid channels was less than 1 in 10(7). These findings favor the hypothesis that each functional VDAC channel is composed of a single 30-kDa polypeptide chain.

Toward the molecular structure of the mitochondrial channel, VDAC

A summary is presented of the most recent information about the structure and mechanism of closure of the mitochondrial channel, VDAC. Considerable information has come from studies involving electron microscopy of two-dimensional crystals and from electrophysiological studies of wild-type channels and site-directed mutants. Available evidence points to a beta-barrel as the basic structural model for VDAC. Two models for voltage- or effector- induced closure have been proposed, the first involving removal of strands from the wall of the pore, the second invoking movement of protein domains into the lumen. Experimental strategies to resolve the actual mechanism are presented.

Molecular architecture and electrostatic properties of a bacterial porin

The integral membrane protein porin from Rhodobacter capsulatus consists of three tightly associated 16-stranded beta barrels that give rise to three distinct diffusion channels for small solutes through the outer membrane. The x-ray structure of this porin has revealed details of its shape, the residue distributions within the pore and at the membrane-facing surface, and the location of calcium sites. The electrostatic potential has been calculated and related to function. Moreover, potential calculations were found to predict the Ca2+ sites.

Studies of translocation catalysis

There is a symbiotic relationship between the evolution of fundamental theory and the winning of experimentally-based knowledge. The impact of the General Chemiosmotic Theory on our understanding of the nature of membrane transport processes is described and discussed. The history of experimental studies on transport catalysed by ionophore antibiotics and the membrane proteins of mitochondria and bacteria are used to illustrate the evolution of knowledge and theory. Recent experimental approaches to understanding the lactose-H+ symport protein of Escherichia coli and other sugar porters are described to show that the lack of experimental knowledge of the three-dimensional structures of the proteins currently limits the development of theories about their molecular mechanism of translocation catalysis.

Prediction of the general structure of OmpF and PhoE from the sequence and structure of porin from Rhodobacter capsulatus. Orientation of porin in the membrane

By comparing the hydrophilicity profiles and sequences of porin from Rhodobacter capsulatus with those of OmpF and PhoE from Escherichia coli, a set of insertions and deletions for alignment of the sequences has been deduced. With this alignment a similar folding of OmpF and PhoE has been predicted as found by X-ray structure analysis of porin from Rhodobacter capsulates. Furthermore, the orientation of the porin trimer in the outer membrane was inferred from topological data on PhoE. According to this result a single channel of approx. 30 A diameter starts at the outer surface. Near the middle of the outer membrane bilayer this channel branches out into three separate channels, each running within a single porin monomer to the periplasmic surface.

A common channel-forming motif in evolutionarily distant porins

Four new crystal packings of Escherichia coli porins are presented (phosphoporin, maltoporin, and two crystal forms of matrix porin). These were determined by molecular replacement methods using a polyalanine trial model acquired from the refined coordinates of porin from Rhodobacter capsulatus. The successful molecular replacement shows that the dominant motif found in R. capsulatus porin (a 16-stranded antiparallel beta-barrel) also applies to the E. coli porins, despite the lack of significant amino acid sequence homology. A 30 degrees-40 degrees tilt of the beta-strands with respect to the membrane normal was derived from the intensity distributions in the X-ray diffraction patterns for each porin studied, stressing their similarity. In view of the evolutionary distance between enteric and photosynthetic bacteria, the antiparallel beta-barrel may have significance as a basic structural motif for the formation of bacterial membrane channel structures.

Deletions or duplications in the BtuB protein affect its level in the outer membrane of Escherichia coli

The Escherichia coli btuB product is an outer membrane protein that mediates the TonB-coupled active transport of cobalamins and the uptake of the E colicins and bacteriophage BF23. The roles of various segments of the BtuB protein in its function or cellular localization were investigated by analysis of several genetic constructs. Hybrid proteins in which various lengths from the amino terminus of BtuB were linked to alkaline phosphatase (btuB::phoA genes) were all secreted across the cytoplasmic membrane. The BtuB-PhoA proteins that carried up to 327 amino acids of BtuB appeared to reside in the periplasmic space, whereas hybrid proteins containing at least 399 amino acids of BtuB were associated with the outer membrane. Eleven in-frame internal deletion mutations that spanned more than half of the mature sequence were prepared by combining appropriate restriction fragments from btuB variants with 6-bp linker insertions. None of the deleted proteins was able to complement any BtuB functions, and only three of them were detectable in the outer membrane, suggesting that most of the deletions affected sequences needed for stable association with the outer membrane. Duplications covering the same portions of BtuB were prepared in the same manner. All of these partial duplication variants complemented all BtuB functions, although some gave substantially reduced levels of activity. These proteins were found in the outer membrane, although some were subject to proteolytic cleavage within or near the duplicated segment. These results indicate that the insertion of BtuB into the outer membrane requires the presence of several regions of teh BtuB protein and that the presence of extra or redundant segments of the protein can be tolerated during its insertion and function.

The bacterial porin superfamily: sequence alignment and structure prediction

The porins of Gram-negative bacteria are responsible for the 'molecular sieve' properties of the outer membrane. They form large water-filled channels which allow the diffusion of hydrophilic molecules into the periplasmic space. Owing to the strong hydrophilicity of their amino acid sequence and the nature of their secondary structure (beta strands), conventional hydropathy methods for predicting membrane topology are useless for this class of protein. The large number of available porin amino acid sequences was exploited to improve the accuracy of the prediction in combination with tools detecting amphipathicity of secondary structure. Using the constraints of beta-sheet structure these porins are predicted to contain 16 membrane-spanning strands, 14 of which are common to the two (enteric and the neisserial) porin subfamilies.

Class-3 porin protein of Neisseria meningitidis: cloning and structure of the gene

The gene coding for the class-3 protein of Neisseria meningitidis was cloned and sequenced. The deduced amino acid (aa) sequence was highly homologous (50-78%) to those of other neisserial porin proteins. Alignment of the aa sequence of five neisserial porin proteins pinpointed several regions of identity or near identity. These are assumed to be membrane-spanning beta-strands. A comparison of the homologies between these neisserial porins showed that the class-3 protein is most closely related to the Neisseria gonorrhoeae P1A protein.

Primary structure of porin from Rhodobacter capsulatus

The primary structure of the integral membrane protein porin from the purple bacterium Rhodobacter capsulatus was determined. The protein was cleaved with trypsin, CNBr and Asp-N protease. The peptides were isolated, sequenced and aligned to a total length of 301 residues with an Mr of 31,536. The low isoelectric point of 3.9 is confirmed by the high excess of 34 Asp and 17 Glu (16.9%) over 10 Lys, 7 Arg and 2 His (6.3%). Overall sequence similarity to other porins is not evident when using sequence alignment programs. However, a partial relationship to Neisseria porins seems to exist. The established sequence has been used as the basis for a three-dimensional structure determination by X-ray diffraction at 0.18-nm resolution. The arrangement of the sequence in the 16-stranded beta-barrel of porin is given. Some sequence-structure correlations are discussed.

Tandem sequence repeats in transmembrane channel proteins

The flow of ions and small molecules out of and between cells is mediated by various classes of transmembrane proteins. One group of putative channel proteins, including the abundant lens protein MIP, is widely distributed from prokaryotes to vertebrates. This article suggests that these proteins contain a structural twofold repeat and may have arisen by gene duplication. Such a model has implications for the tertiary structures of these important proteins.

Trigonal crystals of porin from Escherichia coli

Trigonal crystals of the integral membrane protein porin from Escherichia coli have been grown and characterized. They belong to space group P321 with unit cell constants a = b = LL8.4, c = 52.7 A, alpha = beta = 90 degrees, gamma = 120 degrees. The crystals grow as well-defined hexagonal prisms to a size of 0.25 mm in all dimensions, and diffract to 2.7 A. The molecular symmetry coincides with 3-fold crystallographic symmetry, giving two trimers per unit cell (1 monomer/asymmetric unit). This corresponds to VM = 2.9 A3/Da. Native X-ray data to 3.0 A resolution have been collected on a FAST area detector and a search for heavy atom derivatives is underway.

Nucleotide and derived amino acid sequences of the major porin of Comamonas acidovorans and comparison of porin primary structures

The DNA sequence of the gene which codes for the major outer membrane porin (Omp32) of Comamonas acidovorans has been determined. The structural gene encodes a precursor consisting of 351 amino acid residues with a signal peptide of 19 amino acid residues. Comparisons with amino acid sequences of outer membrane proteins and porins from several other members of the class Proteobacteria and of the Chlamydia trachomatis porin and the Neurospora crassa mitochondrial porin revealed a motif of eight regions of local homology. The results of this analysis are discussed with regard to common structural features of porins.