Mechanism of head assembly and DNA encapsulation in Salmonella phage P22. II. Morphogenetic pathway

Autoregulation of the bacteriophage P22 scaffolding protein gene

During the formation of each bacteriophage P22 head, about 250 molecules of the product of gene 8, scaffolding protein, coassemble with and dictate correct assembly of the coat protein into a proper shell structure. At approximately the time that DNA is inserted inside the coat protein shell, all of the scaffolding protein molecules leave the structure. They remain active and participate in several subsequent rounds of shell assembly. Previous work has shown that scaffolding protein gene expression is affected by the head assembly process and has generated the hypothesis that unassembled scaffolding protein negatively modulates the expression of its own gene but that it lacks this activity when complexed with coat protein in proheads. To test this model, a P22 restriction fragment containing the scaffolding and coat protein genes was cloned under control of the lac promoter. These cloned genes were then expressed in an in vitro DNA-dependent transcription-translation reaction. The addition of purified scaffolding protein to this reaction resulted in reduced scaffolding protein synthesis relative to coat and tail protein synthesis to an extent and at a protein concentration that was consistent with the observed reduction in vivo. We conclude that scaffolding protein synthesis is autoregulated and that scaffolding protein is the only phage-coded protein required for this process. In addition, these experiments provide additional evidence that this autoregulation is posttranscriptional.

DNA injection proteins are targets of acridine-sensitized photoinactivation of bacteriophage P22

Viruses and other nucleoprotein complexes are inactivated on exposure to white light in the presence of acridine and related dyes. The mechanism is thought to involve generation of singlet oxygen or related species, but the actual molecular targets of the inactivating event have not been well defined. We have re-examined the mechanism of dye-sensitized photoinactivation taking advantage of the well characterized bacteriophage P22. Though the inactivated phage absorb to their host cells, the cells are not killed and genetic markers cannot be rescued from the inactivated phage. These observations indicate that the chromosome is not injected into the host cell. However, the DNA of the damaged particles shows no evidence of double-stranded breaks or crosslinking. The DNA injection process of P22 requires three particle-associated proteins, the products of genes 7, 16 and 20. Gp16, which can act in trans during injection, is inactivated in the killed particles. Sodium dodecyl sulfate/polyacrylamide gel analysis reveals that gp16, gp7 and gp20 are progressively covalently damaged during photoinactivation. However, this damage does not occur in particles lacking DNA, indicating that it is DNA-mediated. Similar findings were obtained with acridine orange, acridine yellow, proflavin and acriflavin. These results indicate that the actual targets for inactivation are the DNA injection proteins, and that the lethal events represent absorption of photons by acridine molecules stacked in a region of DNA closely associated with the injection proteins.

Steps in the stabilization of newly packaged DNA during phage P22 morphogenesis

The protein products of three adjacent P22 genes, 4, 10 and 26, are required for the stabilization of DNA newly packaged into P22 phage capsids. We have isolated unstable DNA containing capsids from cells infected with mutants defective in these genes. All three classes could be converted into mature phage in vitro, confirming that they represent intermediates in particle maturation. The first of the three proteins to add to the newly filled capsids is gp4, followed by gp10 and gp26. The active form of gp4 sediments at 3 S, while the active forms of both gp10 and gp26 sediment at 5 S. These soluble subunits appear to polymerize onto the newly filled capsids to form the neck of the mature phage, the channel for DNA injection. Since gp4 is the first protein to act after DNA packaging, the unstable DNA containing capsids from 4- -infected cells must represent the direct product of the packaging of DNA into procapsids. The major fraction of these capsids lost activity with a half-life of 1.1 minutes at 23 degrees C, though they were much more stable at 0 degree C. Electron microscopic observations indicated that the loss of activity was due to the DNA exiting from the incomplete capsids. The marginal stability of the condensed DNA molecules within capsids is consistent with models of ATP-driven condensation and spontaneous DNA ejection. The basis of the stability of these highly condensed molecules remains to be determined.

Phage head assembly in bacteriophage T1

Phage-related structures found in wild-type and mutant T1 infections were examined by sedimentation analysis, electron microscopy, and polyacrylamide gel electrophoresis. Phage-particle polypeptides P7 (molecular weight 33,000) and P11 (molecular weight 16,000) were identified as major head proteins and P10 (molecular weight 26,000) was shown to be the major tail protein. A DNA-free head-like structure containing P7 but not P11 was present in wild-type and a number of mutant infections. In view of its possible role as a precursor to mature heads, this structure was termed the prohead. Mutants in two genes, am10 (gene 13) and am45 (gene 14), synthesised only tails in nonpermissive infections. Mutants in eight of the head genes, am23 (gene 4), am283 (gene 13.3), am216 (gene 13.7), ts257 (gene 14.5), am11 (gene 15), am4 (gene 16), am7 (gene 17), and am30 (gene 18), synthesised proheads and tails but not other structures. am37 (gene 12) synthesised proheads, tails, and empty heads. Studies with a tail-defective mutant suggested that empty heads were produced from the breakdown of DNA-filled heads. P11, the T1 gene 13.3 product, is analogous to the phage lambda gene D protein: both are major capsid proteins which appear to stabilise the later stages of head filling. These data are reviewed according to the general principles established for phage-head assembly and a tentative pathway for T1-head assembly is proposed.

Genetic analysis of the folding pathway for the tail spike protein of phage P22

Temperature-sensitive mutations in the gene encoding the trimeric tail spike protein of phage P22 interfere with protein maturation at 39 degrees C. We show here that temperature-sensitive mutations at many sites block the folding pathway prior to accumulation of the partially folded protrimer intermediate. Temperature-shift experiments indicate that at least some of the mutants accumulate an earlier intermediate in the folding pathway. Immunoprecipitation experiments suggest that the conformation of the isolated temperature-sensitive polypeptide chains is closer to that of the unfolded chain than to that of the mature spike formed at permissive temperature. The sites of these mutations probably represent amino acid sequences that play key roles during the folding of the tail spike polypeptide chain but are not important in the mature protein.

Bacteriophage P22 in vitro DNA packaging monitored by agarose gel electrophoresis: rate of DNA entry into capsids

Bacteriophage P22, like other double-stranded DNA bacteriophages, packages DNA in a preassembled, DNA-free procapsid. The P22 procapsid and P22 bacteriophage have been electrophoretically characterized; the procapsid has a negative average electrical surface charge density (sigma) higher in magnitude than the negative sigma of the mature bacteriophage. Dextrans, sucrose, and maltose were shown to have a dramatic stimulatory effect on the in vitro packaging of DNA by the P22 procapsid. However, sedoheptulose, smaller sugars, and smaller polyols did not stimulate in vitro P22 DNA packaging. These and other data suggest that an osmotic pressure difference across some particle, probably a capsid, stimulates P22 DNA packaging. After in vitro packaging was optimized by including dextran 40 in extracts, the entry kinetics of DNA into P22 capsids were measured. Packaged DNA was detected by: (i) DNA-specific staining of intact capsids after fractionation by agarose gel electrophoresis and (ii) agarose gel electrophoresis of DNase-resistant DNA after release of DNase-resistant DNA from capsids. It was found that the first DNA was packaged by 1.5 min after the start of incubation. The data further suggest that either P22 capsids with DNA partially packaged in vitro are too unstable to be detected by the above procedures or entry of DNA into the capsid occurs in less than 0.25 min.

On the sequential packaging of bacteriophage P22 DNA

Bacteriophage P22 is thought to package daughter chromosomes serially along concatemeric DNA. We present experiments which show that the average DNA packaging series length increases with time after infection, which supports this model. In addition, we have analyzed the effect on average series length of lowering the amount of the various individual proteins involved in DNA packaging. These results support the notion that the protein products of gene 2 and gene 3 are both more stringently required for initiation of sequential DNA packaging series than for their extension, and they are compatible with a model for the control of series length in which that length is determined, at least in part, by a competition between series initiation events and extension events.

Bacteriophage SPO1 structure and morphogenesis. I. Tail structure and length regulation

Bacteriophage SPO1, a structually complex phage with hydroxymethyl uracil replacing thymine, has been studied by structural and chemical methods with the aim of defining the virion organization. The contractile tail of SPO1 consists of a complex baseplate, a tail tube, and a 140-nm-long sheath composed of stacked disks (4.1 nm repeat), each containing six subunits of molecular weight 60,300. The subunits are arranged in six parallel helices, each with a helical screw angle (omega 0) of 22.5 degrees. The baseplate was shown to undergo a structural rearrangement during tail contraction into a hexameric pinwheel. A mutation in gene 8 which produced unattached heads and tails also produced tails of different lengths. The tail length distribution suggests that the smallest integral length increment is a single disk of subunits. The structural arrangement of subunits in long tails is identical to that of normal tails, and the tails can contract. Many of the long tails showed partial stain penetration within the tail tube to a point which coincides with the top of a unit-length tail. The implications of these findings with respect to tail length regulation are discussed.

Coliphage P1 morphogenesis: analysis of mutants by electron microscopy

We used electron microscopy and serum blocking power tests to determine the phenotypes of 47 phage P1 amber mutants that have defects in particle morphogenesis. Eleven mutants showed head defects, 30 showed tail defects, and 6 had a defect in particle maturation (which could be either in the head or in the tail). Consideration of previous complementation test results, genetic and physical positions of the mutations, and phenotypes of the mutants allowed assignment of most of the 47 mutations to genes. Thus, a minimum of 12 tail genes, 4 head genes, and 1 particle maturation gene are now known for P1. Of the 12 tail genes, 1 (gene 19, located within the invertible C loop) codes for tail fibers, 6 (genes 3, 5, 16, 20, 21, and 26) code for baseplate components (although one of these genes could code for the tail tube), 1 (gene 22) codes for the sheath, 1 (gene 6) affects tail length, 2 (genes 7 and 25) are involved in tail stability, and 1 (gene 24) either codes for a baseplate component or is involved in tail stability. Of the four head genes, gene 9 codes for a protein required for DNA packaging. The function of head gene 4 is unclear. Head gene 8 probably codes for a minor head protein, whereas head gene 23 could code for either a minor head protein or the major head protein. Excluding the particle maturation gene (gene 1), the 12 tail genes are clustered in three regions of the P1 physical genome. The four head genes are at four separate locations. However, some P1 head genes have not yet been detected and could be located in two regions (for which there are no known genes) adjacent to genes 4 and 8. The P1 morphogenetic gene clusters are interrupted by many genes that are expressed in the prophage.

Structural studies of P22 phage, precursor particles, and proteins by laser Raman spectroscopy

For the study of the protein--protein and protein--nucleic acid interactions in the assembly of virus particles, laser Raman spectra have been obtained in H2O and D2O solutions and as a function of temperature for the following Salmonella phage P22 components: mature phage particles, isolated mature phage DNA, mature protein shells empty of DNA, precursor protein shells (procapsids), and purified coat, scaffolding and tail-spike proteins. The spectra confirm that the condensed DNA within the phage capsid assumes the B-form secondary structure similar to aqueous DNA and reveal no evidence of specific molecular interactions between subgroups of DNA and protein subunits of the phage capsid. No differences were detected in the highly irregular secondary structure of the major capsid protein in mature capsids, empty capsids (lacking DNA), procapsids, and empty procapsids (lacking scaffolding protein). Features of both primary and secondary structures of the viral scaffolding and tail-spike proteins are also revealed by the spectra. Differences in thermal stability of tyrosyl side-chain interactions were observed between scaffolding protein extracted from the procapsid and within the procapsid. These differences correspond to different hydrogen bonding configurations of p-hydroxyphenyl groups and provide indirect evidence for the participation of the scaffolding proteins in specific macromolecular interactions within the procapsid.

Characterization of a temperature-sensitive fiber mutant of type 5 adenovirus and effect of the mutation on virion assembly

A temperature-sensitive, fiber-minus mutant of type 5 adenovirus, H5ts142, was biochemically and genetically characterized. Genetic studies revealed that H5ts142 was a member of one of the three apparent fiber complementation groups which were detected owing to intracistronic complementation. Recombination analyses showed that it occupied a unique locus at the right end of the adenovirus genetic map. At the nonpermissive temperature, the mutant made stable polypeptides, but they were not glycosylated like wild-type fiber polypeptides. Sedimentation studies of extracts of H5ts142-infected cells cultured and labeled at 39.5 degrees C indicated that a limited number of the fiber polypeptides made at the nonpermissive temperature could assemble into a form having a sedimentation value of 6S (i.e., similar to the trimeric wild-type fiber), but that this 6S structure was not immunologically reactive. When H5ts142-infected cells were shifted to the permissive temperature, 32 degrees C, fiber polypeptides synthesized at 39.5 degrees C were as capable of being assembled into virions as fibers synthesized in wild type-infected cells; de novo protein synthesis was not required to allow this virion assembly. In H5ts142-infected cells incubated at 39.5 degrees C, viral proteins accumulated and aggregated into particles having physical characteristics of empty capsids. These particles did not contain DNA or its associated core proteins. However, when the infected culture was shifted to 32 degrees C, DNA appeared to enter the empty particles and complete virions developed. The intermediate particles obtained had the morphology of adenoviruses, but they contained less than unit-length viral genomes as measured by their buoyant density in a CsCl density gradient and the size of their DNA as determined in both neutral and alkaline sucrose gradients. The reduced size of the intermediate particle DNA was demonstrated to be the result of incompletely packaged DNA molecules being fragmented during the preparative procedures. Hybridization of labeled DNA extracted from the intermediate particles to filters containing restriction fragments of the adenovirus genome indicated that the molecular left end of the viral genome preferentially entered these particles.

Absence of a protein constituent and occurrence of an oversized DNA genome in a high density mutant particle of phage P22

Mutants of P22 phage with abnormal density in CsCl solution (P22ndc phage) were analyzed in detail for this report. Two dimensional polyacrylamide gel electrophoresis revealed that wild-type P22ndc+ phage virions contained a new protein (gpU) in addition to nine already identified proteins, while P22ndc lacked gpU. The molecular weight of gpU was essentially the same as that of gp5 (45,500), and one mature virion of phage P22ndc+ contained as many as 30-50 molecules of gpU. As P22ndc is a plaque-forming phage, gpU cannot be essential for the growth and assembly of P22 phage. Both genetical and biochemical analysis of the phage DNA in the virion revealed that P22ndc phage contained 2%-4% longer DNA than wild type P22ndc+. A model is presented to account for the formation of P22ndc phage.

Structural destabilization of synaptosomal particles by lysis and sequential chemical treatments

Synaptosomes from rat brains were subjected to a sequence of treatments: osmotic lysis, buffered saline wash, nonionic detergent, EGTA and EDTA. After each treatment, particulate samples were fixed in 2% glutaraldehyde-1% formaldehyde and centrifuged to form pellets which were then processed for and examined by electron microscopy. Five morphological classes of synaptic particle were defined in terms of character and presence of synaptic vesicles, flocculent and stranded material, designated as intervesicular scaffolding (IVS), and presynaptic membrane. During osmotic lysis, the presynaptic compartment was altered by loss of most, but not all, small synaptic vesicles, by increase in proportion of large vesicles, and by disappearance of the presynaptic densities. The retention of vesicles was interpreted in terms of IVS struts interconnecting anchorage sites on synaptic vesicles and the presynaptic junctional membrane. Treatment of lysed synaptosomes with nonionic detergent or EGTA resulted in loss of vesicles and IVS from the junctional region in most particles. The apposition of pre-and postsynaptic junctional membranes along the synaptic cleft was disrupted more by EGTA than by detergent. The final result of the sequential treatments was a sediment containing a high proportion of synaptic particles, about half of which had lost their presynaptic junctional membranes.

Regulation of coat protein polymerization by the scaffolding protein of bacteriophage P22

In the morphogenesis of double stranded DNA phages, a precursor protein shell empty of DNA is first assembled and then filled with DNA. The assembly of the correctly dimensioned precursor shell (procapsid) of Salmonella bacteriophage P22 requires the interaction of some 420 coat protein subunits with approximately 200 scaffolding protein subunits to form a double shelled particle with the scaffolding protein on the inside. In the course of DNA packaging, all of the scaffolding protein subunits exit from the procapsid and participate in further rounds of procapsid assembly (King and Casjens. 1974. Nature (Lond.). 251:112-119). To study the mechanism of shell assembly we have purified the coat and scaffolding protein subunits by selective dissociation of isolated procapsids. Both proteins can be obtained as soluble subunits in Tris buffer at near neutral pH. The coat protein sedimented in sucrose gradients as a roughly spherical monomer, while the scaffolding protein sedimented as if it were an elongated monomer. When the two proteins were mixed together in 1.5 M guanidine hydrochloride and dialyzed back to buffer at room temperature, procapsids formed which were very similar in morphology, sedimentation behavior, and protein composition to procapsids formed in vivo. Incubation of either protein alone under the same conditions did not yield any large structures. We interpret these results to mean that the assembly of the shell involves a switching of both proteins from their nonaggregating to their aggregating forms through their mutual interaction. The results are discussed in terms of the general problem of self-regulated assembly and the control of protein polymerization in morphogenesis.

Oversized flagellar membrane protein in paralyzed mutants of Chlamydomonas reinhardrii

A mutant strain of Chlamydomonas reinhardtii is shown to possess an oversized flagellar membrane protein. The mutant has paralyzed flagella, is temperature sensitive for flagellar assembly, and has an abnormal axonemal protein composition. All phenotypes appear to derive from a single Mendelian mutation, and genetic analysis suggests that the mutation, which call ts222, is in the gene pfl. Because pf1 mutants are known to have radial-spoke defects (Piperno et al., 1977, Proc. Natl. Acad. Sci. U. S. A. 74:1600-1604; and Witman et al., 1978, J. Cell Biol. 76:729-797), a relation as yet undefined appears to exist between radial-spoke and flagellar membrane biogenesis.

Structure of DNA within three isometric bacteriophages

This paper describes a model for the structure of DNA contained in three morphologically similar bacteriophages--T7, P22 and phiCd-1--based on the transient electric dichroism of intact phage. The reduced dichroism of each of the phages at perfect orientation is within the range +0.12 to +0.19. Assuming that the phage orientation axis is that which passes from the apex through the tail, the measured dichroism suggests that DNA is wrapped in closely packed, co-axial solenoids with the axis of the solenoids tipped 43.5 degrees +/- 2.5 degrees from the orientation axis of the phage. All three phages show a large permanent dipole moment, with respective values of 5600, 200,000 and 500,000 Debye for T7, phiCd-1 and P22. The radius of the equivalent sphere for the three phages calculated from the rotational relaxation time for the rise of dichroism is in agreement with birefringence and electron microscope observations. The circular dichroism spectra of all three bacteriophages indicate that the local DNA helicity is similar in each case.

Assembly of Bacillus subtilis phage phe29. 2. Mutants in the cistrons coding for the non-structural proteins

The effect on phage morphogenesis of sus mutations in the cistrons coding for nonstructural proteins has been studied. Mutants in three cistrons analyzed that are involved in phage DNA synthesis, as well as in cistron 16 which codes for a late nonstructural protein, produce prolate capsids which are more rounded at the corners than complete phage heads and have an internal core; they contain the head proteins, the upper collar protein and protein p7, not present in mature phage particles. Mutants in cistron 7 do not produce capsids nor other phage-related structures; this result and the presence of p7 in phage capsids suggest an essential role in capsid assembly for this protein. The protein product of cistron 13 is probably needed for a stable DNA encapsulation since mutants in this cistron produce mainly DNA-free complete phage particles and only about 10% of uninfective DNA-containing complete phage. Cistron 15 codes for a late, partially dispensable, nonstructural protein which is present in the DNA-free capsids produced after infection with the delayed-lysis mutant sus14(1242), used as the wild-type control, or with mutants in cistrons 9, 11,12 and 13. Proteins p15 and p16 are probably involved in the encapsulation of viral DNA in a prohead.

Assembly of Bacillus subtilis phage phi29. 1. Mutants in the cistrons coding for the structural proteins

The effect of mutations in the cistrons coding for the phage structural proteins has been studied by analyzing the phage-related structures accumulated after restrictive infection. Infection with susmutants in cistron 8, lacking both the major head and the fiber protein, does not produce any phage-related structure, suggesting a single route for the assembly of phage phi29; infection with ts mutants in this cistron produces isometric particles. Mutants is cistron 9, coding for the tail protein, TP1, produce DNA-free prolate heads with an internal core; these particles are abortive and contain the head proteins HPO, HP1 and HP3, the upper collar protein NP2 and the nonstructural proteins p7, p15 and p16. Mutants in cistron 10, coding for the upper collar protein, NP2, produce DNA-free isometric heads also with an internal core; they contain the head proteins and the nonstructural protein p7, suggesting that this protein forms the internal core. Mutants in cistrons 11 and 12, coding for the lower collar protein, NP3, and the neck appendages, NP1, respectively, give rise to the formation of DNA-containing normal capsids and DNA-free prolate particles, more rounded at the corners than the normal capsids and with an internal core; the DNA-containing 11-particles are formed by the head proteins and the upper collar protein; the DNA-free 11-particles contain, besides these proteins, the nonstructural protein p7 and a small amount of proteins p15 and 16. The DNA-containing 12-particles have all the normal phage structural proteins except the neck appendages, formed by protein NP1; the DNA-free particles are similar to the DNA-free 11-particles. After restricitive infection mutant sus14(1241) has a delayed lysis phenotype and produces a phage burst higher than normal, after artificial lysis. It produces DNA-containing particles, identical to wild-type phage, which have all the normal phage structural proteins, and DNA-free prolate particles, more rounded at the corners than the final phage particles and with an internal core; the last particles contain the same proteins as the DNA-free 11 or 12-particles. These particles could represent a prohead state, ready for DNA encapsulation. None of the DNA-containing particles have the nonstructural proteins p7, p15 or p16, suggesting that these proteins are released from the proheads upon DNA encapsulation.

The insertion of DNA into vaccinia virus

Cells infected with vaccinia virus in the presence of hydroxyurea (HU), which blocks DNA replication, were examined in thin sections by electron microscopy at intervals after removal of HU. Dense, fibrillar material was observed at the orifice formed just before closure of the membrane constituting the envelope of the immature form of the virus. It is concluded that synchrony of assembly enabled stages in the condensation and insertion of viral deoxyribonucleoprotein to be observed. The mechanism appears to be similar to that encountered in morphologic studies of herpes simplex virus and in biochemical studies of poliovirus, adenovirus, and several bacteriophages.

Morphogenesis of bacteriophage phi 29 of Bacillus subtilis: preliminary isolation and characterization of intermediate particles of the assembly pathway

Three classes of particles have been identified in restrictive phi 29 suppressor-sensitive (sus) mutant infections of Bacillus subtilis, including DNA-containing heads or phage, prohead, and empty heads. Pulse-chase labeling experiments indicate that the prohead, the first particle assembled in 14-infected cells, is converted to DNA-filled heads and phi 29. In addition to the proteins Hd, P10, and F found in mature phi 29, the prohead contains a "core" protein P7 that exits as the prohead matures and appears to recycle during subsequent rounds of prohead assembly. Prohead-like structures accumulate in UV-irradiated cells and are present in restrictive infections with sus mutants of cistrons 9 and 16. Empty heads are observed only when infection results in the formation of DNA-containing particles; this and other evidence indicates that the empty heads are probably not true intermediates. Phage phi 29 assembly apparently occurs by a single pathway in which neck and tail components interact to stabilize the completed DNA-containing head.