Folding and assembly of beta-barrel membrane proteins

Polysaccharide export outer membrane proteins in Gram-negative bacteria

Polysaccharide export outer membrane proteins of Gram-negative bacteria are involved in the export of polysaccharides across the outer membrane. The mechanisms of polysaccharide export across the outer membrane in Gram-negative bacteria are not yet completely clear. However, the mechanisms of polysaccharide assembly in Escherichia coli have been intensively investigated. Here, we mainly review the current understanding of the assembly mechanisms of group 1 capsular polysaccharide, group 2 capsular polysaccharide and lipopolysaccharide of E. coli, and the current structures and interactions of some polysaccharide export outer membrane proteins with other proteins involved in polysaccharide export in Gram-negative bacteria. In addition, LptD may be targeted by peptidomimetic antibiotics in Gram-negative bacteria. We also give insights into the directions of future research regarding the mechanisms of polysaccharide export.

The major outer sheath protein (Msp) of Treponema denticola has a bipartite domain architecture and exists as periplasmic and outer membrane-spanning conformers

The major outer sheath protein (Msp) is a primary virulence determinant in Treponema denticola, as well as the parental ortholog for the Treponema pallidum repeat (Tpr) family in the syphilis spirochete. The Conserved Domain Database (CDD) server revealed that Msp contains two conserved domains, major outer sheath protein(N) (MOSP(N)) and MOSP(C), spanning residues 77 to 286 and 332 to 543, respectively, within the N- and C-terminal regions of the protein. Circular dichroism (CD) spectroscopy, Triton X-114 (TX-114) phase partitioning, and liposome incorporation demonstrated that full-length, recombinant Msp (Msp(Fl)) and a recombinant protein containing MOSP(C), but not MOSP(N), form amphiphilic, β-sheet-rich structures with channel-forming activity. Immunofluorescence analysis of intact T. denticola revealed that only MOSP(C) contains surface-exposed epitopes. Data obtained using proteinase K accessibility, TX-114 phase partitioning, and cell fractionation revealed that Msp exists as distinct OM-integrated and periplasmic trimers. Msp(Fl) folded in Tris buffer contained slightly less β-sheet structure than detergent-folded Msp(Fl); both forms, however, partitioned into the TX-114 detergent-enriched phase. CDD analysis of the nine Tpr paralogs predicted to be outer membrane proteins (OMPs) revealed that seven have an Msp-like bipartite structure; phylogenetic analysis revealed that the MOSP(N) and MOSP(C) domains of Msp are most closely related to those of TprK. Based upon our collective results, we propose a model whereby a newly exported, partially folded intermediate can be either processed for OM insertion by the β-barrel assembly machinery (BAM) or remain periplasmic, ultimately forming a stable, water-soluble trimer. Extrapolated to T. pallidum, our model enables us to explain how individual Tprs can localize to either the periplasmic (e.g., TprK) or OM (e.g., TprC) compartments.

Does the lipid environment impact the open-state conductance of an engineered β-barrel protein nanopore?

Using rational membrane protein design, we were recently able to obtain a β-barrel protein nanopore that was robust under an unusually broad range of experimental circumstances. This protein nanopore was based upon the native scaffold of the bacterial ferric hydroxamate uptake component A (FhuA) of Escherichia coli. In this work, we expanded the examinations of the open-state current of this engineered protein nanopore, also called FhuA ΔC/Δ4L, employing an array of lipid bilayer systems that contained charged and uncharged as well as conical and cylindrical lipids. Remarkably, systematical single-channel analysis of FhuA ΔC/Δ4L indicated that most of its biophysical features, such as the unitary conductance and the stability of the open-state current, were not altered under the conditions tested in this work. However, electrical recordings at high transmembrane potentials revealed that the presence of conical phospholipids within the bilayer catalyzes the first, stepwise current transition of the FhuA ΔC/Δ4L protein nanopore to a lower-conductance open state. This study reinforces the stability of the open-state current of the engineered FhuA ΔC/Δ4L protein nanopore under various experimental conditions, paving the way for further critical developments in biosensing and molecular biomedical diagnosis.

Mechanism of bacterial inactivation by (+)-limonene and its potential use in food preservation combined processes

This work explores the bactericidal effect of (+)-limonene, the major constituent of citrus fruits' essential oils, against E. coli. The degree of E. coli BJ4 inactivation achieved by (+)-limonene was influenced by the pH of the treatment medium, being more bactericidal at pH 4.0 than at pH 7.0. Deletion of rpoS and exposure to a sub-lethal heat or an acid shock did not modify E. coli BJ4 resistance to (+)-limonene. However, exposure to a sub-lethal cold shock decreased its resistance to (+)-limonene. Although no sub-lethal injury was detected in the cell envelopes after exposure to (+)-limonene by the selective-plating technique, the uptake of propidium iodide by inactivated E. coli BJ4 cells pointed out these structures as important targets in the mechanism of action. Attenuated Total Reflectance Infrared Microspectroscopy (ATR-IRMS) allowed identification of altered E. coli BJ4 structures after (+)-limonene treatments as a function of the treatment pH: β-sheet proteins at pH 4.0 and phosphodiester bonds at pH 7.0. The increased sensitivity to (+)-limonene observed at pH 4.0 in an E. coli MC4100 lptD4213 mutant with an increased outer membrane permeability along with the identification of altered β-sheet proteins by ATR-IRMS indicated the importance of this structure in the mechanism of action of (+)-limonene. The study of mechanism of inactivation by (+)-limonene led to the design of a synergistic combined process with heat for the inactivation of the pathogen E. coli O157:H7 in fruit juices. These results show the potential of (+)-limonene in food preservation, either acting alone or in combination with lethal heat treatments.

The phosphatidic acid binding site of the Arabidopsis trigalactosyldiacylglycerol 4 (TGD4) protein required for lipid import into chloroplasts

Chloroplast membrane lipid synthesis relies on the import of glycerolipids from the ER. The TGD (TriGalactosylDiacylglycerol) proteins are required for this lipid transfer process. The TGD1, -2, and -3 proteins form a putative ABC (ATP-binding cassette) transporter transporting ER-derived lipids through the inner envelope membrane of the chloroplast, while TGD4 binds phosphatidic acid (PtdOH) and resides in the outer chloroplast envelope. We identified two sequences in TGD4, amino acids 1-80 and 110-145, which are necessary and sufficient for PtdOH binding. Deletion of both sequences abolished PtdOH binding activity. We also found that TGD4 from 18:3 plants bound specifically and with increased affinity PtdOH. TGD4 did not interact with other proteins and formed a homodimer both in vitro and in vivo. Our results suggest that TGD4 is an integral dimeric β-barrel lipid transfer protein that binds PtdOH with its N terminus and contains dimerization domains at its C terminus.

Supersecondary structure prediction of transmembrane beta-barrel proteins

We introduce a graph-theoretic model for predicting the supersecondary structure of transmembrane β-barrel proteins--a particular class of proteins that performs diverse important functions but it is difficult to determine their structure with experimental methods. This ab initio model resolves the protein folding problem based on pseudo-energy minimization with the aid of a simple probabilistic filter. It also allows for determining structures whose barrel follows a given permutation on the arrangement of β-strands, and allows for rapidly discriminating the transmembrane β-barrels from other kinds of proteins. The model is fairly accurate, robust and can be run very efficiently on PC-like computers, thus proving useful for genome screening.

Curvature forces in membrane lipid-protein interactions

Membrane biochemists are becoming increasingly aware of the role of lipid-protein interactions in diverse cellular functions. This review describes how conformational changes in membrane proteins, involving folding, stability, and membrane shape transitions, potentially involve elastic remodeling of the lipid bilayer. Evidence suggests that membrane lipids affect proteins through interactions of a relatively long-range nature, extending beyond a single annulus of next-neighbor boundary lipids. It is assumed the distance scale of the forces is large compared to the molecular range of action. Application of the theory of elasticity to flexible soft surfaces derives from classical physics and explains the polymorphism of both detergents and membrane phospholipids. A flexible surface model (FSM) describes the balance of curvature and hydrophobic forces in lipid-protein interactions. Chemically nonspecific properties of the lipid bilayer modulate the conformational energetics of membrane proteins. The new biomembrane model challenges the standard model (the fluid mosaic model) found in biochemistry texts. The idea of a curvature force field based on data first introduced for rhodopsin gives a bridge between theory and experiment. Influences of bilayer thickness, nonlamellar-forming lipids, detergents, and osmotic stress are all explained by the FSM. An increased awareness of curvature forces suggests that research will accelerate as structural biology becomes more closely entwined with the physical chemistry of lipids in explaining membrane structure and function.

Assembly of the β-Barrel Outer Membrane Proteins in Gram-Negative Bacteria, Mitochondria, and Chloroplasts

In the last decade, there has been an explosion of publications on the assembly of β-barrel outer membrane proteins (OMPs), which carry out diverse cellular functions, including solute transport, protein secretion, and assembly of protein and lipid components of the outer membrane. Of the three outer membrane model systems—Gram-negative bacteria, mitochondria and chloroplasts—research on bacterial and mitochondrial systems has so far led the way in dissecting the β-barrel OMP assembly pathways. Many exciting discoveries have been made, including the identification of β-barrel OMP assembly machineries in bacteria and mitochondria, and potentially the core assembly component in chloroplasts. The atomic structures of all five components of the bacterial β-barrel assembly machinery (BAM) complex, except the β-barrel domain of the core BamA protein, have been solved. Structures reveal that these proteins contain domains/motifs known to facilitate protein-protein interactions, which are at the heart of the assembly pathways. While structural information has been valuable, most of our current understanding of the β-barrel OMP assembly pathways has come from genetic, molecular biology, and biochemical analyses. This paper provides a comparative account of the β-barrel OMP assembly pathways in Gram-negative bacteria, mitochondria, and chloroplasts.

New insights in mechanisms of bacterial inactivation by carvacrol

AIMS

To study the mechanism of bacterial inactivation by carvacrol and the influence of genetic and environmental factors in its antimicrobial activity.

METHODS AND RESULTS

In general, bacterial inactivation by carvacrol was higher in the Gram-positive Listeria monocytogenes than in the Gram-negative Escherichia coli and at acidic pH. At pH 4.0, 25 μl l(-1) of carvacrol for 5 h inactivated 1 and more than 5 log(10) cycles of E. coli and L. monocytogenes populations, respectively. Genetic and environmental factors also influenced cell resistance to carvacrol: rpoS and sigB deletion decreased carvacrol resistance in E. coli and L. monocytogenes, respectively; a heat shock induced a phenomenon of cross-protection to carvacrol treatments. Repair of sublethal injuries in cell envelopes suggested that carvacrol targets lipid fractions and proteins of these structures. This result was corroborated by attenuated total reflectance infrared microspectroscopy analysis.

CONCLUSIONS

This study shows critical genetic and environmental factors, such as rpoS or sigB and heat shocks, and reveals new microbial structures involved in the mechanism of bacterial inactivation by carvacrol.

SIGNIFICANCE AND IMPACT OF THE STUDY

A better understanding of the mechanisms of microbial inactivation is of great relevance to design more appropriate carvacrol treatments with high antimicrobial effects.

γ-Hemolysin oligomeric structure and effect of its formation on supported lipid bilayers: an AFM investigation

γ-Hemolysins are bicomponent β-barrel pore forming toxins produced by Staphylococcus aureus as water-soluble monomers, which assemble into oligomeric pores on the surface of lipid bilayers. Here, after investigating the oligomeric structure of γ-hemolysins on supported lipid bilayers (SLBs) by atomic force microscopy (AFM), we studied the effect produced by this toxin on the structure of SLBs. We found that oligomeric structures with different number of monomers can assemble on the lipid bilayer being the octameric form the stablest one. Moreover, in this membrane model we found that γ-hemolysins can form clusters of oligomers inducing a curvature in the lipid bilayer, which could probably enhance the aggressiveness of these toxins at high concentrations.

Eicosapentaenoic acid facilitates the folding of an outer membrane protein of the psychrotrophic bacterium, Shewanella livingstonensis Ac10

Polyunsaturated fatty acids, such as eicosapentaenoic acid (EPA), are found in various cold-adapted microorganisms. We previously demonstrated that EPA-containing phospholipids (EPA-PLs) synthesized by the psychrotrophic bacterium Shewanella livingstonensis Ac10 support cell division, membrane biogenesis, and the production of membrane proteins at low temperatures. In this article, we demonstrate the effects of EPA-PLs on the folding and conformational transition of Omp74, a major outer membrane cold-inducible protein in this bacterium. Omp74 from an EPA-less mutant migrated differently from that of the parent strain on SDS-polyacrylamide gel, suggesting that EPA-PLs affect the conformation of Omp74 in vivo. To examine the effects of EPA-PLs on Omp74 protein folding, in vitro refolding of recombinant Omp74 was carried out with liposomes composed of 1,2-dipalmitoleoyl-sn-glycero-3-phosphoglycerol and 1,2-dipalmitoleoyl-sn-glycero-3-phosphoethanolamine (1:1 molar ratio) with or without EPA-PLs as guest lipids. SDS-PAGE analysis of liposome-reconstituted Omp74 revealed more rapid folding in the presence of EPA-PLs. CD spectroscopy of Omp74 folding kinetics at 4 °C showed that EPA-PLs accelerated β-sheet formation. These results suggest that EPA-PLs act as chemical chaperones, accelerating membrane insertion and secondary structure formation of Omp74 at low temperatures.

Characterization of interleukin-1 receptor-associated kinase 1 binding protein 1 gene in small abalone Haliotis diversicolor

Interleukin receptor-associated kinase (IRAK)-1 binding protein 1 (IRAK1BP1) is a critical factor in preventing dangerous overproduction of proinflammatory cytokines by the innate immune system and in influencing the specificity of TLR responses. In this study, a first molluscan IRAK1BP1 gene, saIRAK1BP1, was cloned from the small abalone (Haliotis diversicolor). Its full-length cDNA sequence is 1047bp, with a 747bp open reading frame encoding a protein of 249 aa. The molecular mass of the deduced protein is approximately 28.1kDa with an estimated pI of 8.87, and shows highest identity (52%) to acorn worm Saccoglossus kowalevskii. Amino acid sequence analysis revealed that saIRAK1BP1 shares a conserved SIMPL domain. Quantitative real-time PCR was employed to investigate the tissue distribution of saIRAK1BP1 mRNA, and its expression in abalone under bacteria challenge and larvae at different developmental stages. The saIRAK1BP1 mRNA could be detected in all examined tissues, with the highest expression level in hemocytes, and was up-regulated in gills, kidneys and hemocytes after bacteria injection. Additionally, saIRAK1BP1 was constitutively expressed at all examined developmental stages. These results indicate that saIRAK1BP1 play an important role in the adult abalone immune system and might be essential in embryo and larval development in abalone.

The transmembrane protein KpOmpA anchoring the outer membrane of Klebsiella pneumoniae unfolds and refolds in response to tensile load

In Klebsiella pneumoniae the transmembrane β-barrel forming outer membrane protein KpOmpA mediates adhesion to a wide range of immune effector cells, thereby promoting respiratory tract and urinary infections. As major transmembrane protein OmpA stabilizes Gram-negative bacteria by anchoring their outer membrane to the peptidoglycan layer. Adhesion, osmotic pressure, hydrodynamic flow, and structural deformation apply mechanical stress to the bacterium. This stress can generate tensile load to the peptidoglycan-binding domain (PGBD) of KpOmpA. To investigate how KpOmpA reacts to mechanical stress, we applied a tensile load to the PGBD and observed a detailed unfolding pathway of the transmembrane β-barrel. Each step of the unfolding pathway extended the polypeptide connecting the bacterial outer membrane to the peptidoglycan layer and absorbed mechanical energy. After relieving the tensile load, KpOmpA reversibly refolded back into the membrane. These results suggest that bacteria may reversibly unfold transmembrane proteins in response to mechanical stress.

A graph-theoretic approach for classification and structure prediction of transmembrane β-barrel proteins

Background

Transmembrane β-barrel proteins are a special class of transmembrane proteins which play several key roles in human body and diseases. Due to experimental difficulties, the number of transmembrane β-barrel proteins with known structures is very small. Over the years, a number of learning-based methods have been introduced for recognition and structure prediction of transmembrane β-barrel proteins. Most of these methods emphasize on homology search rather than any biological or chemical basis.

Results

We present a novel graph-theoretic model for classification and structure prediction of transmembrane β-barrel proteins. This model folds proteins based on energy minimization rather than a homology search, avoiding any assumption on availability of training dataset. The ab initio model presented in this paper is the first method to allow for permutations in the structure of transmembrane proteins and provides more structural information than any known algorithm. The model is also able to recognize β-barrels by assessing the pseudo free energy. We assess the structure prediction on 41 proteins gathered from existing databases on experimentally validated transmembrane β-barrel proteins. We show that our approach is quite accurate with over 90% F-score on strands and over 74% F-score on residues. The results are comparable to other algorithms suggesting that our pseudo-energy model is close to the actual physical model. We test our classification approach and show that it is able to reject α-helical bundles with 100% accuracy and β-barrel lipocalins with 97% accuracy.

Conclusions

We show that it is possible to design models for classification and structure prediction for transmembrane β-barrel proteins which do not depend essentially on training sets but on combinatorial properties of the structures to be proved. These models are fairly accurate, robust and can be run very efficiently on PC-like computers. Such models are useful for the genome screening.

Engineered oligomerization state of OmpF protein through computational design decouples oligomer dissociation from unfolding

Biogenesis of β-barrel membrane proteins is a complex, multistep, and as yet incompletely characterized process. The bacterial porin family is perhaps the best-studied protein family among β-barrel membrane proteins that allows diffusion of small solutes across the bacterial outer membrane. In this study, we have identified residues that contribute significantly to the protein-protein interaction (PPI) interface between the chains of outer membrane protein F (OmpF), a trimeric porin, using an empirical energy function in conjunction with an evolutionary analysis. By replacing these residues through site-directed mutagenesis either with energetically favorable residues or substitutions that do not occur in natural bacterial outer membrane proteins, we succeeded in engineering OmpF mutants with dimeric and monomeric oligomerization states instead of a trimeric oligomerization state. Moreover, our results suggest that the oligomerization of OmpF proceeds through a series of interactions involving two distinct regions of the extensive PPI interface: two monomers interact to form a dimer through the PPI interface near G19. This dimer then interacts with another monomer through the PPI interface near G135 to form a trimer. We have found that perturbing the PPI interface near G19 results in the formation of the monomeric OmpF only. Thermal denaturation of the designed dimeric OmpF mutant suggests that oligomer dissociation can be separated from the process of protein unfolding. Furthermore, the conserved site near G57 and G59 is important for the PPI interface and might provide the essential scaffold for PPIs.

Mitochondrial 3β-hydroxysteroid dehydrogenase enzyme activity requires reversible pH-dependent conformational change at the intermembrane space

The inner mitochondrial membrane protein 3β-hydroxysteroid dehydrogenase 2 (3βHSD2) synthesizes progesterone and androstenedione through its dehydrogenase and isomerase activities. This bifunctionality requires 3βHSD2 to undergo a conformational change. Given its proximity to the proton pump, we hypothesized that pH influences 3βHSD2 conformation and thus activity. Circular dichroism (CD) showed that between pH 7.4 and 4.5, 3βHSD2 retained its primarily α-helical character with a decrease in α-helical content at lower pH values, whereas the β-sheet content remained unchanged throughout. Titrating the pH back to 7.4 restored the original conformation within 25 min. Metabolic conversion assays indicated peak 3βHSD2 activity at pH 4.5 with ~2-fold more progesterone synthesized at pH 4.5 than at pH 3.5 and 7.4. Increasing the 3βHSD2 concentration from 1 to 40 μg resulted in a 7-fold increase in progesterone at pH 4.5, but no change at pH 7.4. Incubation with guanidinum hydrochloride (GdmHCl) showed a three-step cooperative unfolding of 3βHSD2 from pH 7.4 to 4.5, possibly due to the native state unfolding to the intermediate ion core state. With further decreases in pH, increasing concentrations of GdmHCl led to rapid two-step unfolding that may represent complete loss of structure. Between pH 4 and 5, the two intermediate states appeared stable. Stopped-flow kinetics showed slower unfolding at around pH 4, where the protein is in a pseudostable state. Based on our data, we conclude that at pH 4-5, 3βHSD2 takes on a molten globule conformation that promotes the dual functionality of the enzyme.

Predicting three-dimensional structures of transmembrane domains of β-barrel membrane proteins

β-Barrel membrane proteins are found in the outer membrane of gram-negative bacteria, mitochondria, and chloroplasts. They are important for pore formation, membrane anchoring, and enzyme activity. These proteins are also often responsible for bacterial virulence. Due to difficulties in experimental structure determination, they are sparsely represented in the protein structure databank. We have developed a computational method for predicting structures of the transmembrane (TM) domains of β-barrel membrane proteins. Based on physical principles, our method can predict structures of the TM domain of β-barrel membrane proteins of novel topology, including those from eukaryotic mitochondria. Our method is based on a model of physical interactions, a discrete conformational state space, an empirical potential function, as well as a model to account for interstrand loop entropy. We are able to construct three-dimensional atomic structure of the TM domains from sequences for a set of 23 nonhomologous proteins (resolution 1.8-3.0 Å). The median rmsd of TM domains containing 75-222 residues between predicted and measured structures is 3.9 Å for main chain atoms. In addition, stability determinants and protein-protein interaction sites can be predicted. Such predictions on eukaryotic mitochondria outer membrane protein Tom40 and VDAC are confirmed by independent mutagenesis and chemical cross-linking studies. These results suggest that our model captures key components of the organization principles of β-barrel membrane protein assembly.

Lipid-mediated unfolding of 3β-hydroxysteroid dehydrogenase 2 is essential for steroidogenic activity

For inner mitochondrial membrane (IMM) proteins that do not undergo N-terminal cleavage, the activity may occur in the absence of a receptor present in the mitochondrial membrane. One such protein is human 3β-hydroxysteroid dehydrogenase 2 (3βHSD2), the IMM resident protein responsible for catalyzing two key steps in steroid metabolism: the conversion of pregnenolone to progesterone and dehydroepiandrosterone to androstenedione. Conversion requires that 3βHSD2 serve as both a dehydrogenase and an isomerase. The dual functionality of 3βHSD2 results from a conformational change, but the trigger for this change remains unknown. Using fluorescence resonance energy transfer, we found that 3βHSD2 interacted strongly with a mixture of dipalmitoylphosphatidylglycerol (DPPG) and dipalmitoylphosphatidylcholine (DPPC). 3βHSD2 became less stable when incubated with the individual lipids, as indicated by the decrease in thermal denaturation (T(m)) from 42 to 37 °C. DPPG, alone or in combination with DPPC, led to a decrease in α-helical content without an effect on the β-sheet conformation. With the exception of the 20 N-terminal amino acids, mixed vesicles protected 3βHSD2 from trypsin digestion. However, protein incubated with DPPC was only partially protected. The lipid-mediated unfolding completely supports the model in which a cavity forms between the α-helix and β-sheet. As 3βHSD2 lacks a receptor, opening the conformation may activate the protein.

Folding and stability of membrane transport proteins in vitro

Transmembrane transporters are responsible for maintaining a correct internal cellular environment. The inherent flexibility of transporters together with their hydrophobic environment means that they are challenging to study in vitro, but recently significant progress been made. This review will focus on in vitro stability and folding studies of transmembrane alpha helical transporters, including reversible folding systems and thermal denaturation. The successful re-assembly of a small number of ATP binding cassette transporters is also described as this is a significant step forward in terms of understanding the folding and assembly of these more complex, multi-subunit proteins. The studies on transporters discussed here represent substantial advances for membrane protein studies as well as for research into protein folding. The work demonstrates that large flexible hydrophobic proteins are within reach of in vitro folding studies, thus holding promise for furthering knowledge on the structure, function and biogenesis of ubiquitous membrane transporter families. This article is part of a Special Issue entitled: Protein Folding in Membranes.

Mechanisms for quality control of misfolded transmembrane proteins

To prevent the accumulation of misfolded and aggregated proteins, the cell has developed a complex network of cellular quality control (QC) systems to recognize misfolded proteins and facilitate their refolding or degradation. The cell faces numerous obstacles when performing quality control on transmembrane proteins. Transmembrane proteins have domains on both sides of a membrane and QC systems in distinct compartments must coordinate to monitor the folding status of the protein. Additionally, transmembrane domains can have very complex organization and QC systems must be able to monitor the assembly of transmembrane domains in the membrane. In this review, we will discuss the QC systems involved in repair and degradation of misfolded transmembrane proteins. Also, we will elaborate on the factors that recognize folding defects of transmembrane domains and what happens when misfolded transmembrane proteins escape QC and aggregate. This article is part of a Special Issue entitled: Protein Folding in Membranes.

The Bam machine: a molecular cooper

The bacterial outer membrane (OM) is an exceptional biological structure with a unique composition that contributes significantly to the resiliency of Gram-negative bacteria. Since all OM components are synthesized in the cytosol, the cell must efficiently transport OM-specific lipids and proteins across the cell envelope and stably integrate them into a growing membrane. In this review, we discuss the challenges associated with these processes and detail the elegant solutions that cells have evolved to address the topological problem of OM biogenesis. Special attention will be paid to the Bam machine, a highly conserved multiprotein complex that facilitates OM β-barrel folding. This article is part of a Special Issue entitled: Protein Folding in Membranes.

Tryptophan-lipid interactions in membrane protein folding probed by ultraviolet resonance Raman and fluorescence spectroscopy

Aromatic amino acids of membrane proteins are enriched at the lipid-water interface. The role of tryptophan on the folding and stability of an integral membrane protein is investigated with ultraviolet resonance Raman and fluorescence spectroscopy. We investigate a model system, the β-barrel outer membrane protein A (OmpA), and focus on interfacial tryptophan residues oriented toward the lipid bilayer (trp-7, trp-170, or trp-15) or the interior of the β-barrel pore (trp-102). OmpA mutants with a single tryptophan residue at a nonnative position 170 (Trp-170) or a native position 7 (Trp-7) exhibit the greatest stability, with Gibbs free energies of unfolding in the absence of denaturant of 9.4 and 6.7 kcal/mol, respectively. These mutants are more stable than the tryptophan-free OmpA mutant, which exhibits a free energy of unfolding of 2.6 kcal/mol. Ultraviolet resonance Raman spectra of Trp-170 and Trp-7 reveal evolution of a hydrogen bond in a nonpolar environment during the folding reaction, evidenced by systematic shifts in hydrophobicity and hydrogen bond markers. These observations suggest that the hydrogen bond acceptor is the lipid acyl carbonyl group, and this interaction contributes significantly to membrane protein stabilization. Other spectral changes are observed for a tryptophan residue at position 15, and these modifications are attributed to development of a tryptophan-lipid cation-π interaction that is more stabilizing than an intraprotein hydrogen bond by ∼2 kcal/mol. As expected, there is no evidence for lipid-protein interactions for the tryptophan residue oriented toward the interior of the β-barrel pore. These results highlight the significance of lipid-protein interactions, and indicate that the bilayer provides more than a hydrophobic environment for membrane protein folding. Instead, a paradigm of lipid-assisted membrane protein folding and stabilization must be adopted.

Physical determinants of β-barrel membrane protein folding in lipid vesicles

The spontaneous folding of two Neisseria outer membrane proteins, opacity-associated (Opa)(60) and Opa(50) into lipid vesicles was investigated by systematically varying bulk and membrane properties. Centrifugal fractionation coupled with sodium dodecyl sulfate polyacrylamide gel electrophoresis mobility assays enabled the discrimination of aggregate, unfolded membrane-associated, and folded membrane-inserted protein states as well as the influence of pH, ionic strength, membrane surface potential, lipid saturation, and urea on each. Protein aggregation was reduced with increasing lipid chain length, basic pH, low salt, the incorporation of negatively charged guest lipids, or by the addition of urea to the folding reaction. Insertion from the membrane-associated form was improved in shorter chain lipids, with more basic pH and low ionic strength; it is hindered by unsaturated or ether-linked lipids. The isolation of the physical determinants of insertion suggests that the membrane surface and dipole potentials are driving forces for outer membrane protein insertion and folding into lipid bilayers.

The soluble, periplasmic domain of OmpA folds as an independent unit and displays chaperone activity by reducing the self-association propensity of the unfolded OmpA transmembrane β-barrel

OmpA is one of only a few transmembrane proteins whose folding and stability have been investigated in detail. However, only half of the OmpA mass encodes its transmembrane β-barrel; the remaining sequence is a soluble domain that is localized to the periplasmic side of the outer membrane. To understand how the OmpA periplasmic domain contributes to the stability and folding of the full-length OmpA protein, we cloned, expressed, purified and studied the OmpA periplasmic domain independently of the OmpA transmembrane β-barrel region. Our experiments showed that the OmpA periplasmic domain exists as an independent folding unit with a free energy of folding equal to -6.2 (±0.1) kcal mol(-1) at 25°C. Using circular dichroism, we determined that the OmpA periplasmic domain adopts a mixed alpha/beta secondary structure, a conformation that has previously been used to describe the partially folded non-native state of the full-length OmpA. We further discovered that the OmpA periplasmic domain reduces the self-association propensity of the unfolded barrel domain, but only when covalently attached (in cis). In vitro folding experiments showed that self-association competes with β-barrel folding when allowed to occur before the addition of membranes, and the periplasmic domain enhances the folding efficiency of the full-length protein by reducing its self-association. These results identify a novel chaperone function for the periplasmic domain of OmpA that may be relevant for folding in vivo. We have also extensively investigated the properties of the self-association reaction of unfolded OmpA and found that the transmembrane region must form a critical nucleus comprised of three molecules before undergoing further oligomerization to form large molecular weight species. Finally, we studied the conformation of the unfolded OmpA monomer and found that the folding-competent form of the transmembrane region adopts an expanded conformation, which is in contrast to previous studies that have suggested a collapsed unfolded state.

The virulence factor PEB4 (Cj0596) and the periplasmic protein Cj1289 are two structurally related SurA-like chaperones in the human pathogen Campylobacter jejuni

The PEB4 protein is an antigenic virulence factor implicated in host cell adhesion, invasion, and colonization in the food-borne pathogen Campylobacter jejuni. peb4 mutants have defects in outer membrane protein assembly and PEB4 is thought to act as a periplasmic chaperone. The crystallographic structure of PEB4 at 2.2-Å resolution reveals a dimer with distinct SurA-like chaperone and peptidyl-prolyl cis/trans isomerase (PPIase) domains encasing a large central cavity. Unlike SurA, the chaperone domain is formed by interlocking helices from each monomer, creating a domain-swapped architecture. PEB4 stimulated the rate of proline isomerization limited refolding of denatured RNase T(1) in a juglone-sensitive manner, consistent with parvulin-like PPIase domains. Refolding and aggregation of denatured rhodanese was significantly retarded in the presence of PEB4 or of an engineered variant specifically lacking the PPIase domain, suggesting the chaperone domain possesses a holdase activity. Using bioinformatics approaches, we identified two other SurA-like proteins (Cj1289 and Cj0694) in C. jejuni. The 2.3-Å structure of Cj1289 does not have the domain-swapped architecture of PEB4 and thus more resembles SurA. Purified Cj1289 also enhanced RNase T(1) refolding, although poorly compared with PEB4, but did not retard the refolding of denatured rhodanese. Structurally, Cj1289 is the most similar protein to SurA in C. jejuni, whereas PEB4 has most structural similarity to the Par27 protein of Bordetella pertussis. Our analysis predicts that Cj0694 is equivalent to the membrane-anchored chaperone PpiD. These results provide the first structural insights into the periplasmic assembly of outer membrane proteins in C. jejuni.

Prediction of the exposure status of transmembrane beta barrel residues from protein sequence

We present BTMX (Beta barrel TransMembrane eXposure), a computational method to predict the exposure status (i.e. exposed to the bilayer or hidden in the protein structure) of transmembrane residues in transmembrane beta barrel proteins (TMBs). BTMX predicts the exposure status of known TM residues with an accuracy of 84.2% over 2,225 residues and provides a confidence score for all predictions. Predictions made are in concert with the fact that hydrophobic residues tend to be more exposed to the bilayer. The biological relevance of the input parameters is also discussed. The highest prediction accuracy is obtained when a sliding window comprising three residues with similar C(α)-C(β) vector orientations is employed. The prediction accuracy of the BTMX method on a separate unseen non-redundant test dataset is 78.1%. By employing out-pointing residues that are exposed to the bilayer, we have identified various physico-chemical properties that show statistically significant differences between the beta strands located at the oligomeric interfaces compared to the non-oligomeric strands. The BTMX web server generates colored, annotated snake-plots as part of the prediction results and is available under the BTMX tab at http://service.bioinformatik.uni-saarland.de/tmx-site/. Exposure status prediction of TMB residues may be useful in 3D structure prediction of TMBs.

TP0326, a Treponema pallidum β-barrel assembly machinery A (BamA) orthologue and rare outer membrane protein

Definitive identification of Treponema pallidum rare outer membrane proteins (OMPs) has long eluded researchers. TP0326, the sole protein in T. pallidum with sequence homology to a Gram-negative OMP, belongs to the BamA family of proteins essential for OM biogenesis. Structural modelling predicted that five polypeptide transport-associated (POTRA) domains comprise the N-terminus of TP0326, while the C-terminus forms an 18-stranded amphipathic β-barrel. Circular dichroism, heat modifiability by SDS-PAGE, Triton X-114 phase partitioning and liposome incorporation supported these topological predictions and confirmed that the β-barrel is responsible for the native protein's amphiphilicity. Expression analyses revealed that native TP0326 is expressed at low abundance, while a protease-surface accessibility assay confirmed surface exposure. Size-exclusion chromatography and blue native polyacrylamide gel electrophoresis revealed a modular Bam complex in T. pallidum larger than that of Escherichia coli. Non-orthologous ancillary factors and self-association of TP0326 via its β-barrel may both contribute to the Bam complex. T. pallidum-infected rabbits mount a vigorous antibody response to both POTRA and β-barrel portions of TP0326, whereas humans with secondary syphilis respond predominantly to POTRA. The syphilis spirochaete appears to have devised a stratagem for harnessing the Bam pathway while satisfying its need to limit surface antigenicity.

Folding studies of purified LamB protein, the maltoporin from the Escherichia coli outer membrane: trimer dissociation can be separated from unfolding

The folding mechanisms for β-barrel membrane proteins present unique challenges because acquisition of both secondary and tertiary structure is coupled with insertion into the bilayer. For the porins in Escherichia coli outer membrane, the assembly pathway also includes association into homotrimers. We study the folding pathway for purified LamB protein in detergent and observe extreme hysteresis in unfolding and refolding, as indicated by the shift in intrinsic fluorescence. The strong hysteresis is not seen in unfolding and refolding a mutant LamB protein lacking the disulfide bond, as it unfolds at much lower denaturant concentrations than wild type LamB protein. The disulfide bond is proposed to stabilize the structure of LamB protein by clasping together the two sides of Loop 1 as it lines the inner cavity of the barrel. In addition we find that low pH promotes dissociation of the LamB trimer to folded monomers, which run at about one third the size of the native trimer during SDS PAGE and are much more resistant to trypsin than the unfolded protein. We postulate the loss at low pH of two salt bridges between Loop 2 of the neighboring subunit and the inner wall of the monomer barrel destabilizes the quaternary structure.

Crystal structure of BamD: an essential component of the β-Barrel assembly machinery of gram-negative bacteria

Folding and insertion of integral β-barrel proteins in the outer membrane (OM) is an essential process for Gram-negative bacteria that requires the β-barrel assembly machinery (BAM). Efficient OM protein (OMP) folding and insertion appears to require a consensus C-terminal signal in OMPs characterized by terminal F or W residues. The BAM complex is embedded in the OM and, in Escherichia coli, consists of the β-barrel BamA and four lipoproteins BamBCDE. BamA and BamD are broadly distributed across all species of Gram-negative bacteria, whereas the other components are present in only a subset of species. BamA and BamD are also essential for viability, suggesting that these two proteins constitute the functional core of the bacterial BAM complex. Here, we present the crystal structure of BamD from the thermophilic bacteria Rhodothermus marinus refined to 2.15 Å resolution. The protein contains five tetratricopeptide repeats (TPRs) organized into two offset tandems, each capped by a terminal helix. The N-terminal domain contains three TPRs and displays remarkable structural similarity with proteins that recognize targeting signals in extended conformations. The C-terminal domain harbors the remaining two TPRs and previously described mutations that impair binding to other BAM components map to this domain. Therefore, the structure suggests a model where the C-terminal domain provides a scaffold for interaction with BAM components, while the N-terminal domain participates in interaction with the substrates, either recognizing the C-terminal consensus sequence or binding unfolded OMP intermediates.

Statistical analysis and exposure status classification of transmembrane beta barrel residues

Several computational methods exist for the identification of transmembrane beta barrel proteins (TMBs) from sequence. Some of these methods also provide the transmembrane (TM) boundaries of the putative TMBs. The aim of this study is to (1) derive the propensities of the TM residues to be exposed to the lipid bilayer and (2) to predict the exposure status (i.e. exposed to the bilayer or hidden in protein structure) of TMB residues. Three novel propensity scales namely, BTMC, BTMI and HTMI were derived for the TMB residues at the hydrophobic core region of the outer membrane (OM), the lipid-water interface regions of the OM, and for the helical membrane proteins (HMPs) residues at the lipid-water interface regions of the inner membrane (IM), respectively. Separate propensity scales were derived for monomeric and functionally oligomeric TMBs. The derived propensities reflect differing physico-chemical properties of the respective membrane bilayer regions and were employed in a computational method for the prediction of the exposure status of TMB residues. Based on the these propensities, the conservation indices and the frequency profile of the residues, the transmembrane residues were classified into buried/exposed with an accuracy of 77.91% and 80.42% for the residues at the membrane core and the interface regions, respectively. The correlation of the derived scales with different physico-chemical properties obtained from the AAIndex database are also discussed. Knowledge about the residue propensities and burial status will be useful in annotating putative TMBs with unknown structure.

Dual energy landscape: the functional state of the β-barrel outer membrane protein G molds its unfolding energy landscape

We applied dynamic single-molecule force spectroscopy to quantify the parameters (free energy of activation and distance of the transition state from the folded state) characterizing the energy barriers in the unfolding energy landscape of the outer membrane protein G (OmpG) from Escherichia coli. The pH-dependent functional switching of OmpG directs the protein along different regions on the unfolding energy landscape. The two functional states of OmpG take the same unfolding pathway during the sequential unfolding of β-hairpins I-IV. After the initial unfolding events, the unfolding pathways diverge. In the open state, the unfolding of β-hairpin V in one step precedes the unfolding of β-hairpin VI. In the closed state, β-hairpin V and β-strand S11 with a part of extracellular loop L6 unfold cooperatively, and subsequently β-strand S12 unfolds with the remaining loop L6. These two unfolding pathways in the open and closed states join again in the last unfolding step of β-hairpin VII. Also, the conformational change from the open to the closed state witnesses a rigidified extracellular gating loop L6. Thus, a change in the conformational state of OmpG not only bifurcates its unfolding pathways but also tunes its mechanical properties for optimum function.

Augmenting β-augmentation: structural basis of how BamB binds BamA and may support folding of outer membrane proteins

β-Barrel proteins are frequently found in the outer membrane of mitochondria, chloroplasts and Gram-negative bacteria. In Escherichia coli, these proteins are inserted in the outer membrane by the Bam (β-barrel assembly machinery) complex, a multiprotein machinery formed by the β-barrel protein BamA and the four peripheral membrane proteins BamB, BamC, BamD and BamE. The periplasmic part of BamA binds prefolded β-barrel proteins by a β-augmentation mechanism, thereby stabilizing the precursors prior to their membrane insertion. However, the role of the associated proteins within the Bam complex remains unknown. Here, we describe the crystal structure of BamB, a nonessential component of the Bam complex. The structure shows a typical eight-bladed β-propeller fold. Two sequence stretches of BamB were previously identified to be important for interaction with BamA. In our structure, both motifs are located in close proximity to each other and contribute to a conserved region forming a narrow groove on the top of the propeller. Moreover, crystal contacts reveal two interaction modes of how BamB might bind unfolded β-barrel proteins. In the crystal lattice, BamB binds to exposed β-strands by β-augmentation, whereas peptide stretches rich in aromatic residues can be accommodated in hydrophobic pockets located at the bottom of the propeller. Thus, BamB could simultaneously bind to BamA and prefolded β-barrel proteins, thereby enhancing the folding and membrane insertion capability of the Bam complex.

Membrane protein dynamics from femtoseconds to seconds

Membrane proteins play a key role in energy conversion, transport, signal recognition, transduction, and other fundamental biological processes. Despite considerable progress in experimental techniques, the determination of structure and dynamics of membrane proteins still represents a great challenge. Computer simulation methods are becoming an increasingly important tool not only in the interpretation of experiments but also in the prediction of membrane protein dynamics. In the present review, we give a brief introduction to molecular modeling techniques currently used to explore protein dynamics on time scales ranging from femtoseconds to microseconds. We then describe a few recent example applications of these techniques to membrane proteins. In conclusion, we also discuss some of the newest developments in simulation methodology that have the potential to further extend the time scale accessible to explore (membrane) protein dynamics.

Expression, refolding, and initial structural characterization of the Y. pestis Ail outer membrane protein in lipids

Ail is an outer membrane protein and virulence factor of Yersinia pestis, an extremely pathogenic, category A biothreat agent, responsible for precipitating massive human plague pandemics throughout history. Due to its key role in bacterial adhesion to host cells and bacterial resistance to host defense, Ail is a key target for anti-plague therapy. However, little information is available about the molecular aspects of its function and interactions with the human host, and the structure of Ail is not known. Here we describe the recombinant expression, purification, refolding, and sample preparation of Ail for solution and solid-state NMR structural studies in lipid micelles and lipid bilayers. The initial NMR and CD spectra show that Ail adopts a well-defined transmembrane β-sheet conformation in lipids.

Cell-free synthesis and folding of transmembrane OmpA reveals higher order structures and premature truncations

We use a cell-free transcription-translation system to monitor the effect of different lipids on the synthesis and folding of the transmembrane domain of the outer membrane protein OmpA from E. coli under physiological conditions. Folding is consistent with previous observations made in vitro at high pH. Synthesis and folding yields are optimal in phosphocholine lipids, particularly in short chain lipids and small vesicles, while lipid rafts do not promote folding compared to the folding in the absence of lipids. Truncated species are observed during translation in the presence of the periplasmic chaperone Skp, which likely binds to the newly synthesized polypeptide chain during cell-free translation and thus prematurely terminate polypeptide chain synthesis. In contrast, folded and unfolded dimers of OmpA correlate negatively with folding yields. This suggests that dimer formation competes with folding and insertion of monomeric OmpA, though folded dimers slowly appear to convert to folded monomers.

Protein folding in membranes

Separation of cells and organelles by bilayer membranes is a fundamental principle of life. Cellular membranes contain a baffling variety of proteins, which fulfil vital functions as receptors and signal transducers, channels and transporters, motors and anchors. The vast majority of membrane-bound proteins contain bundles of alpha-helical transmembrane domains. Understanding how these proteins adopt their native, biologically active structures in the complex milieu of a membrane is therefore a major challenge in today's life sciences. Here, we review recent progress in the folding, unfolding and refolding of alpha-helical membrane proteins and compare the molecular interactions that stabilise proteins in lipid bilayers. We also provide a critical discussion of a detergent denaturation assay that is increasingly used to determine membrane-protein stability but is not devoid of conceptual difficulties.

Orientation of the Escherichia coli outer membrane protein OmpX in phospholipid bilayer membranes determined by solid-State NMR

The solid-state NMR orientation-dependent frequencies measured for membrane proteins in macroscopically oriented lipid bilayers provide precise orientation restraints for structure determination in membranes. Here we show that this information can also be used to supplement crystallographic structural data to establish the orientation of a membrane protein in the membrane. This is achieved by incorporating a few orientation restraints, measured for the Escherichia coli outer membrane protein OmpX in magnetically oriented lipid bilayers (bicelles), in a simulated annealing calculation with the coordinates of the OmpX crystal structure. The (1)H-(15)N dipolar couplings measured for the seven Phe residues of OmpX in oriented bilayers can be assigned by back-calculation of the NMR spectrum from the crystal structure and are sufficient to establish the three-dimensional orientation of the protein in the membrane, while the (15)N chemical shifts provide a measure of cross-validation for the analysis. In C14 lipid bilayers, OmpX adopts a transmembrane orientation with a 7 degrees tilt of its beta-barrel axis relative to the membrane normal, matching the hydrophobic thickness of the barrel with that of the membrane.

Oligo-(R)-3-hydroxybutyrate modification of sorting signal enables pore formation by Escherichia coli OmpA

The outer membrane protein A (OmpA) of Escherichia coli is a well-known model for protein targeting and protein folding. Wild-type OmpA, isolated either from cytoplasmic inclusion bodies or from outer membranes, forms narrow pores of approximately 80 pS in planar lipid bilayers at room temperature. The pores are well structured with narrow conductance range when OmpA is isolated using lithium dodecyl sulfate (LDS) or RapiGest surfactant but display irregular conductance when OmpA is isolated with urea or guanidine hydrochloride. Previous studies have shown that serine residues S163 and S167 of the sorting signal of OmpA (residues 163-169), i.e., the essential sequence for outer membrane incorporation, are covalently modified by oligomers of (R)-3-hydroxybutyrate (cOHB). Here we find that single-mutants S163 and S167 of OmpA, which still contain cOHB on one serine of the sorting signal, form narrow pores in planar lipid bilayers at room temperature with lower and more irregular conductance than wild-type OmpA, whereas double mutants S163:S167 and S163:V166 of OmpA, with no cOHB on the sorting signal, are unable to form stable pores in planar lipid bilayers. Our results indicate that modification of serines in the sorting signal of OmpA by cOHB in the cytoplasm enables OmpA to incorporate into lipid bilayers at room temperature as a narrow pore. They further suggest that cOHB modification may be an important factor in protein targeting and protein folding.