Delivery of TGF-β1 and chondrocytes via injectable, biodegradable hydrogels for cartilage tissue engineering applications

Injectable biodegradable hydrogels for embryonic stem cell transplantation: improved cardiac remodelling and function of myocardial infarction

In this study, an injectable, biodegradable hydrogel composite of oligo[poly(ethylene glycol) fumarate] (OPF) was investigated as a carrier of mouse embryonic stem cells (mESCs) for the treatment of myocardial infarction (MI). The OPF hydrogels were used to encapsulate mESCs. The cell differentiation in vitro over 14 days was determined via immunohistochemical examination. Then, mESCs encapsulated in OPF hydrogels were injected into the LV wall of a rat MI model. Detailed histological analysis and echocardiography were used to determine the structural and functional consequences after 4 weeks of transplantation. With ascorbic acid induction, mESCs could differentiate into cardiomyocytes and other cell types in all three lineages in the OPF hydrogel. After transplantation, both the 24-hr cell retention and 4-week graft size were significantly greater in the OPF + ESC group than that of the PBS + ESC group (P < 0.01). Four weeks after transplantation, OPF hydrogel alone significantly reduced the infarct size and collagen deposition and improved the cardiac function. The heart function and revascularization improved significantly, while the infarct size and fibrotic area decreased significantly in the OPF + ESC group compared with that of the PBS + ESC, OPF and PBS groups (P < 0.01). All treatments had significantly reduced MMP2 and MMP9 protein levels compared to the PBS control group, and the OPF + ESC group decreased most by Western blotting. Transplanted mESCs expressed cardiovascular markers. This study suggests the potential of a method for heart regeneration involving OPF hydrogels for stem cell encapsulation and transplantation.

New perspectives in cell delivery systems for tissue regeneration: natural-derived injectable hydrogels

Natural polymers, because of their biocompatibility, availability, and physico-chemical properties have been the materials of choice for the fabrication of injectable hydrogels for regenerative medicine. In particular, they are appealing materials for delivery systems and provide sustained and controlled release of drugs, proteins, gene, cells, and other active biomolecules immobilized.In this work, the use of hydrogels obtained from natural source polymers as cell delivery systems is discussed. These materials were investigated for the repair of cartilage, bone, adipose tissue, intervertebral disc, neural, and cardiac tissue. Papers from the last ten years were considered, with a particular focus on the advances of the last five years. A critical discussion is centered on new perspectives and challenges in the regeneration of specific tissues, with the aim of highlighting the limits of current systems and possible future advancements.

Building bridges: leveraging interdisciplinary collaborations in the development of biomaterials to meet clinical needs

Our laboratory at Rice University has forged numerous collaborations with clinicians and basic scientists over the years to advance the development of novel biomaterials and the modification of existing materials to meet clinical needs. This review highlights collaborative advances in biomaterials research from our laboratory in the areas of scaffold development, drug delivery, and gene therapy, especially as related to applications in bone and cartilage tissue engineering.

Repair of an osteochondral defect by sustained delivery of BMP-2 or TGFβ1 from a bilayered alginate-PLGA scaffold

Regeneration of cartilage defects can be accelerated by localized delivery of appropriate growth factors (GFs) from scaffolds. In the present study we analysed the in vitro and in vivo release rates and delivery efficacies of transforming growth factor-β1 (TGFβ1) and bone morphogenetic protein-2 (BMP-2) from a bilayered system, applied for osteochondral defect repair in a rabbit model. A bone-orientated, porous PLGA cylinder was overlaid with GF containing PLGA microspheres, dispersed in an alginate matrix. Four microsphere formulations were incorporated: (a) blank ones; (b) microspheres containing 50 ng TGFβ1; (c) microspheres containing 2.5 µg BMP-2; and (d) microspheres containing 5 µg BMP-2. Release kinetics and tissue distributions were determined using iodinated ((125) I) GFs. Bioactivity of in vitro released BMP-2 and TGFβ1 was confirmed in cell-based assays. In vivo release profiles indicated good GF release control. 20% of BMP-2 and 15% of TGFβ1 were released during the first day. Virtually the total dose was delivered at the end of week 6. Significant histological differences were observed between untreated and GF-treated specimens, there being especially relevant short-term outcomes with 50 ng TGFβ1 and 5 µg BMP-2. Although the evaluation scores for the newly formed cartilage did not differ significantly, 5 µg BMP-2 gave rise to higher quality cartilage with improved surface regularity, tissue integration and increased collagen-type II and aggrecan immunoreactivity 2 weeks post-implantation. Hence, the bilayered system controlled GF release rates and led to preserved cartilage integrity from 12 weeks up to at least 24 weeks.

Stem cells in alginate bioscaffolds

The immobilization of cells into polymeric scaffolds releasing therapeutic factors, such as alginate microcapsules, has been widely employed as a drug-delivery system for numerous diseases for many years. As a result of the potential benefits stem cells offer, during recent decades, this type of cell has gained the attention of the scientific community in the field of cell microencapsulation technology and has opened many perspectives. Stem cells represent an ideal tool for cell immobilization and so does alginate as a biomaterial of choice in the elaboration of these biomimetic scaffolds, offering us the possibility of benefiting from both disciplines in a synergistic way. This review intends to give an overview of the many possibilities and the current situation of immobilized stem cells in alginate bioscaffolds, showing the diverse therapeutic applications they can already be employed in; not only drug-delivery systems, but also tissue engineering platforms.

Synthesis of oligo(poly(ethylene glycol) fumarate)

This protocol describes the synthesis of oligo(poly(ethylene glycol) fumarate) (OPF; 1-35 kDa; a polymer useful for tissue engineering applications) by a one-pot reaction of poly(ethylene glycol) (PEG) and fumaryl chloride. The procedure involves three parts: dichloromethane and PEG are first dried; the reaction step follows, in which fumaryl chloride and triethylamine are added dropwise to a solution of PEG in dichloromethane; and finally, the product solution is filtered to remove by-product salt, and the OPF product is twice crystallized, washed and dried under vacuum. The reaction is affected by the molecular weight of PEG and reactant molar ratio. The OPF product is cross-linked by radical polymerization by either a thermally induced or ultraviolet-induced radical initiator, and the physical properties of the OPF oligomer and resulting cross-linked hydrogel are easily tailored by varying PEG molecular weight. OPF hydrogels are injectable, they polymerize in situ and they undergo biodegradation by hydrolysis of ester bonds. The expected time required to complete this protocol is 6 d.

TRENDS AND CHALLENGES OF CARTILAGE TISSUE ENGINEERING

Cartilage injuries may be caused by trauma, biomechanical imbalance, or degenerative changes of joint. Unfortunately, cartilage has limited capability to spontaneous repair once damaged and may lead to progressive damage and degeneration. Cartilage tissue-engineering techniques have emerged as the potential clinical strategies. An ideal tissue-engineering approach to cartilage repair should offer good integration into both the host cartilage and the subchondral bone. Cells, scaffolds, and growth factors make up the tissue engineering triad. One of the major challenges for cartilage tissue engineering is cell source and cell numbers. Due to the limitations of proliferation for mature chondrocytes, current studies have alternated to use stem cells as a potential source. In the recent years, a lot of novel biomaterials has been continuously developed and investigated in various in vitro and in vivo studies for cartilage tissue engineering. Moreover, stimulatory factors such as bioactive molecules have been explored to induce or enhance cartilage formation. Growth factors and other additives could be added into culture media in vitro, transferred into cells, or incorporated into scaffolds for in vivo delivery to promote cellular differentiation and tissue regeneration.

Based on the current development of cartilage tissue engineering, there exist challenges to overcome. How to manipulate the interactions between cells, scaffold, and signals to achieve the moderation of implanted composite differentiate into moderate stem cells to differentiate into hyaline cartilage to perform the optimum physiological and biomechanical functions without negative side effects remains the target to pursue.

TGF-β1 gene-engineered mesenchymal stem cells induce rat cartilage regeneration using nonviral gene vector

This study evaluated the potential of utilizing transfected pTGFβ-1 gene-engineered rat mesenchymal stem cells (MSCs) using nonviral vector to promote cartilage regeneration. Pullulan-spermine was used as the nonviral gene vector and gelatin sponge was used as the scaffold. MSCs were engineered with TGF-β1 gene with either the three-dimensional (3D) reverse transfection system or the two-dimensional (2D) conventional transfection system. For the 3D reverse transfection system, pullulan-spermine/pTGF-β1 gene complexes were immobilized to the gelatin sponge, followed by the seeding of MSCs. Pullulan-spermine/pTGF-β1 gene complexes were delivered to MSCs cultured in the plate to perform the 2D conventional transfection system, and then MSCs were seeded to the gelatin sponge. Then, TGF-β1 gene-transfected MSC seeded gelatin sponge was implanted to the full-thickness cartilage defect. Compared with the control group, both groups of TGF-β1 gene-engineered MSCs improved cartilage regeneration through optical observation and histology staining. So, with pullulan-spermine as the nonviral vector, TGF-β1-gene engineered MSCs can induce cartilage regeneration in vivo.

Biomechanical study of the edge outgrowth phenomenon of encapsulated chondrocytic isogenous groups in the surface layer of hydrogel scaffolds for cartilage tissue engineering

In cartilage tissue engineering, hydrogel is widely used as the scaffold for hosting and culturing chondrocyte suspension during neo-tissue formation. In order to develop cultured chondrocytes into a functional cartilage equivalent, the hydrogel must provide an ideal microenvironment for the rapidly proliferating chondrocytes. At the same time, the essential functions of chondrocytes, such as the secretion of type II collagen and glycosaminoglycans, must be maintained. In these studies, we quantitatively characterize the mechanobiology underlying a newly discovered "edge flourish" phenomenon of cultured chondrocytes within a three-dimensional agarose hydrogel, which may ultimately nurture scaffold-free cartilaginous tissue regeneration. First, real-time microscopy was used to track the spatiotemporal distributions of chondrocytes at different focal planes. The chondrocytes were observed to exhibit abundant neo-tissue outgrowth and significant cartilaginous phenotype at the edge of the hydrogel compared to those inside the hydrogel bulk. Secondly, the hydrogel surface stresses induced by the encapsulated chondrocytes were characterized quantitatively in real time using the finite-element method. Finally, the real-time three-dimensional matrix deformations of agarose hydrogel under the influence of chondrocytes were measured using a multiple-particle tracking assay. Our results indicate that the mechanism of the "edge flourish" phenomenon is induced by the oriented outgrowth of chondrocytic isogenous groups located at the edge of hydrogel. These isogenous groups exhibit directed outgrowth towards the surface of the hydrogel and eventually generate substantial surface tension on the interface of hydrogel and medium. Ultimately, the encapsulated chondrocytes closest to the hydrogel/medium interface will spontaneously sprout out of the hydrogel and form a layer of rich proliferative and chondrocytic extracellular matrix secreting chondrocytes at the surface of the hydrogel.

Engineered cartilage via self-assembled hMSC sheets with incorporated biodegradable gelatin microspheres releasing transforming growth factor-β1

Self-assembling cell sheets have shown great potential for use in cartilage tissue engineering applications, as they provide an advantageous environment for the chondrogenic induction of human mesenchymal stem cells (hMSCs). We have engineered a system of self-assembled, microsphere-incorporated hMSC sheets capable of forming cartilage in the presence of exogenous transforming growth factor β1 (TGF-β1) or with TGF-β1 released from incorporated microspheres. Gelatin microspheres with two different degrees of crosslinking were used to enable different cell-mediated microsphere degradation rates. Biochemical assays, histological and immunohistochemical analyses, and biomechanical testing were performed to determine biochemical composition, structure, and equilibrium modulus in unconfined compression after 3 weeks of culture. The inclusion of microspheres with or without loaded TGF-β1 significantly increased sheet thickness and compressive equilibrium modulus, and enabled more uniform matrix deposition by comparison to control sheets without microspheres. Sheets incorporated with fast-degrading microspheres containing TGF-β1 produced significantly more GAG and GAG per DNA than all other groups tested and stained more intensely for type II collagen. These findings demonstrate improved cartilage formation in microsphere-incorporated cell sheets, and describe a tailorable system for the chondrogenic induction of hMSCs without necessitating culture in growth factor-containing medium.

The use of micro- and nanospheres as functional components for bone tissue regeneration

During the last decade, the use of micro- and nanospheres as functional components for bone tissue regeneration has drawn increasing interest. Scaffolds comprising micro- and nanospheres display several advantages compared with traditional monolithic scaffolds that are related to (i) an improved control over sustained delivery of therapeutic agents, signaling biomolecules and even pluripotent stem cells, (ii) the introduction of spheres as stimulus-sensitive delivery vehicles for triggered release, (iii) the use of spheres to introduce porosity and/or improve the mechanical properties of bulk scaffolds by acting as porogen or reinforcement phase, (iv) the use of spheres as compartmentalized microreactors for dedicated biochemical processes, (v) the use of spheres as cell delivery vehicle, and, finally, (vi) the possibility of preparing injectable and/or moldable formulations to be applied by using minimally invasive surgery. This article focuses on recent developments with regard to the use of micro- and nanospheres for bone regeneration by categorizing micro-/nanospheres by material class (polymers, ceramics, and composites) as well as summarizing the main strategies that employ these spheres to improve the functionality of scaffolds for bone tissue engineering.

Encapsulation of adipose-derived stem cells and transforming growth factor-β1 in carrageenan-based hydrogels for cartilage tissue engineering

Tissue engineering (TE) is an emerging field for the regeneration of damaged tissues. The combination of hydrogels with stem cells and growth factors (GFs) has become a promising approach to promote cartilage regeneration. In this study, carrageenan-based hydrogels were used to encapsulate both cells and transforming growth factor-β1 (TGF-β1). The ATDC5 cell line was encapsulated to determine the cytotoxicity and the influence of polymer concentration on cell viability and proliferation. Human adipose-derived stem cells (hASCs) were encapsulated with TGF-β1 in the hydrogel networks to enhance the chondrogenic differentiation of hASCs. Specific cartilage extracellular matrix molecules expression by hASCs were observed after 14 days of cultures of the constructs under different conditions. The κ-carrageenan was found to be a suitable biomaterial for cell and GF encapsulation. The incorporation of TGF-β1 within the carrageenan-based hydrogel enhanced the cartilage differentiation of hASCs. These findings indicate that this new system for cartilage TE is very promising for injectable thermoresponsive formulation applications.

Founder's award to Antonios G. Mikos, Ph.D., 2011 Society for Biomaterials annual meeting and exposition, Orlando, Florida, April 13-16, 2011: Bones to biomaterials and back again--20 years of taking cues from nature to engineer synthetic polymer scaffolds

For biomaterials scientists focusing on tissue engineering applications, the gold standard material is healthy, autologous tissue. Ideal material properties and construct design parameters are thus both obvious and often times unachievable; additional considerations such as construct delivery and the underlying pathology necessitating new tissue yield additional design challenges with solutions that are not evident in nature. For the past nearly two decades, our laboratory and collaborators have aimed to develop both new biomaterials and a better understanding of the complex interplay between material and host tissue to facilitate bone and cartilage regeneration. Various approaches have ranged from mimicking native tissue material properties and architecture to developing systems for bioactive molecule delivery as soluble factors or bound directly to the biomaterial substrate. Such technologies have allowed others and us to design synthetic biomaterials incorporating increasing levels of complexity found in native tissues with promising advances made toward translational success. Recent work focuses on translation of these technologies in specific clinical situations through the use of adjunctive biomaterials designed to address existing pathologies or guide host-material integration.

Enhanced MSC chondrogenesis following delivery of TGF-β3 from alginate microspheres within hyaluronic acid hydrogels in vitro and in vivo

Mesenchymal stem cells (MSCs) are being recognized as a viable cell source for cartilage repair and members of the transforming growth factor-beta (TGF-β) superfamily are a key mediator of MSC chondrogenesis. While TGF-β mediated MSC chondrogenesis is well established in in vitro pellet or hydrogel cultures, clinical translation will require effective delivery of TGF-βs in vivo. Here, we investigated the co-encapsulation of TGF-β3 containing alginate microspheres with human MSCs in hyaluronic acid (HA) hydrogels towards the development of implantable constructs for cartilage repair. TGF-β3 encapsulated in alginate microspheres with nanofilm coatings showed significantly reduced initial burst release compared to uncoated microspheres, with release times extending up to 6 days. HA hydrogel constructs seeded with MSCs and TGF-β3 containing microspheres developed comparable mechanical properties and cartilage matrix content compared to constructs supplemented with TGF-β3 continuously in culture media, whereas constructs with TGF-β3 directly encapsulated in the gels without microspheres had inferior properties. When implanted subcutaneously in nude mice, constructs containing TGF-β3 microspheres resulted in superior cartilage matrix formation when compared to groups without TGF-β3 or with TGF-β3 added directly to the gel. However, calcification was observed in implanted constructs after 8 weeks of subcutaneous implantation. To prevent this, the co-delivery of parathyroid hormone-related protein (PTHrP) with TGF-β3 in alginate microspheres was pursued, resulting in partially reduced calcification. This study demonstrates that the controlled local delivery of TGF-β3 is essential to neocartilage formation by MSCs and that further optimization is needed to avert the differentiation of chondrogenically induced MSCs towards a hypertrophic phenotype.

Hydrogels for the repair of articular cartilage defects

The repair of articular cartilage defects remains a significant challenge in orthopedic medicine. Hydrogels, three-dimensional polymer networks swollen in water, offer a unique opportunity to generate a functional cartilage substitute. Hydrogels can exhibit similar mechanical, swelling, and lubricating behavior to articular cartilage, and promote the chondrogenic phenotype by encapsulated cells. Hydrogels have been prepared from naturally derived and synthetic polymers, as cell-free implants and as tissue engineering scaffolds, and with controlled degradation profiles and release of stimulatory growth factors. Using hydrogels, cartilage tissue has been engineered in vitro that has similar mechanical properties to native cartilage. This review summarizes the advancements that have been made in determining the potential of hydrogels to replace damaged cartilage or support new tissue formation as a function of specific design parameters, such as the type of polymer, degradation profile, mechanical properties and loading regimen, source of cells, cell-seeding density, controlled release of growth factors, and strategies to cause integration with surrounding tissue. Some key challenges for clinical translation remain, including limited information on the mechanical properties of hydrogel implants or engineered tissue that are necessary to restore joint function, and the lack of emphasis on the ability of an implant to integrate in a stable way with the surrounding tissue. Future studies should address the factors that affect these issues, while using clinically relevant cell sources and rigorous models of repair.

Antibiotic-releasing porous polymethylmethacrylate/gelatin/antibiotic constructs for craniofacial tissue engineering

An antibiotic-releasing porous polymethylmethacrylate (PMMA) construct was developed to maintain the bony space and prime the wound site in the initial step of a two-stage regenerative medicine approach toward reconstructing significant bony or composite craniofacial tissue defects. Porous PMMA constructs incorporating gelatin microparticles (GMPs) were fabricated by the sequential assembly of GMPs, the antibiotic colistin, and a clinically used bone cement formulation of PMMA powder and methylmethacrylate liquid. PMMA/gelatin/antibiotic constructs with varying gelatin incorporation and drug content were investigated to elucidate the relationship between material composition and construct properties (porosity and drug release kinetics). The porosity of PMMA/gelatin/antibiotic constructs ranged between 7.6±1.8% and 38.4±1.4% depending on the amount of gelatin incorporated and the drug solution added for gelatin swelling. The constructs released colistin over 10 or 14 days with an average release rate per day above 10 μg/ml. The porosity and in vitro colistin release kinetics of PMMA/gelatin/antibiotic constructs were tuned by varying the material composition and fabrication parameters. This study demonstrates the potential of gelatin-incorporating PMMA constructs as a functional space maintainer for both promoting tissue healing/coverage and addressing local infections, enabling better long-term success of the definitive regenerated tissue construct.

Growth factor delivery-based tissue engineering: general approaches and a review of recent developments

The identification and production of recombinant morphogens and growth factors that play key roles in tissue regeneration have generated much enthusiasm and numerous clinical trials, but the results of many of these trials have been largely disappointing. Interestingly, the trials that have shown benefit all contain a common denominator, the presence of a material carrier, suggesting strongly that spatio-temporal control over the location and bioactivity of factors after introduction into the body is crucial to achieve tangible therapeutic effect. Sophisticated materials systems that regulate the biological presentation of growth factors represent an attractive new generation of therapeutic agents for the treatment of a wide variety of diseases. This review provides an overview of growth factor delivery in tissue engineering. Certain fundamental issues and design strategies relevant to the material carriers that are being actively pursued to address specific technical objectives are discussed. Recent progress highlights the importance of materials science and engineering in growth factor delivery approaches to regenerative medicine.

Time controlled release of arabinofuranosylcytosine (Ara-C) from agarose hydrogels using layer-by-layer assembly: an in vitro study

Experimentally induced axonal regeneration is compromised by glial scar formation arising from leptomeningeal fibroblasts cells in and around the hydrogel scaffold implanted for nerve repair. Strategies are needed to prevent such fibroblastic reactive cell layer formation for enhanced axonal regeneration. Here, we implement the technique of layer-by-layer assembled degradable, hydrogen bonded multilayers on agarose hydrogels to incorporate an anti-mitotic drug (1-β-D-arabinofuranosylcytosine (Ara-C)) within the agarose hydrogels. We show controlled release of Ara-C under physiological conditions over a period of days. The concentrations of Ara-C released from agarose at the different time points were sufficient to inhibit fibroblast growth in vitro, while not adversely affecting the viability of the neuronal cells.

Liquid-liquid two-phase systems for the production of porous hydrogels and hydrogel microspheres for biomedical applications: A tutorial review

Macroporous hydrogels may have direct applications in regenerative medicine as scaffolds to support tissue formation. Hydrogel microspheres may be used as drug-delivery vehicles or as building blocks to assemble modular scaffolds. A variety of techniques exist to produce macroporous hydrogels and hydrogel microspheres. A subset of these relies on liquid-liquid two-phase systems. Within this subset, vastly different types of polymerization processes are found. In this review, the history, terminology and classification of liquid-liquid two-phase polymerization and crosslinking are described. Instructive examples of hydrogel microsphere and macroporous scaffold formation by precipitation/dispersion, emulsion and suspension polymerizations are used to illustrate the nature of these processes. The role of the kinetics of phase separation in determining the morphology of scaffolds and microspheres is also delineated. Brief descriptions of miniemulsion, microemulsion polymerization and ionotropic gelation are also included.

Mineralization of hydrogels for bone regeneration

Hydrogels are an important class of highly hydrated polymers that are widely investigated for potential use in soft tissue engineering. Generally, however, hydrogels lack the ability to mineralize, preventing the formation of chemical bonds with hard tissues such as bone. A recent trend in tissue engineering involves the development of hydrogels that possess the capacity to mineralize. The strategy that has attracted most interest has been the incorporation of inorganic phases such as calcium phosphate ceramics and bioglasses into hydrogel matrices. These inorganic particles act as nucleation sites that enable further mineralization, thus improving the mechanical properties of the composite material. A second route to create nucleation sites for calcification of hydrogels involves the use of features from the physiological mineralization process. Examples of these biomimetic mineralization strategies include (1) soaking of hydrogels in solutions that are saturated with respect to calcium phosphate, (2) incorporation of enzymes that catalyze deposition of bone mineral, and (3) incorporation of synthetic analogues to matrix vesicles that are the initial sites of biomineralization. Functionalization of the polymeric hydrogel backbone with negatively charged groups is a third mechanism to promote mineralization in otherwise inert hydrogels. This review summarizes the main strategies that have been developed in the past decade to calcify hydrogel matrices and render these hydrogels suitable for applications in bone regeneration.

The formation of protein concentration gradients mediated by density differences of poly(ethylene glycol) microspheres

A critical element in the formation of scaffolds for tissue engineering is the introduction of concentration gradients of bioactive molecules. We explored the use of poly(ethylene glycol) (PEG) microspheres fabricated via a thermally induced phase separation to facilitate the creation of gradients in scaffolds. PEG microspheres were produced with different densities (buoyancies) and centrifuged to develop microsphere gradients. We previously found that the time to gelation following phase separation controlled the size of microspheres in the de-swollen state, while crosslink density affected swelling following buffer exchange into PBS. The principle factors used here to control microsphere densities were the temperature at which the PEG solutions were reacted following phase separation in aqueous sodium sulfate solutions and the length of the incubation period above the 'cloud point'. Using different temperatures and incubation times, microspheres were formed that self-assembled into gradients upon centrifugation. The gradients were produced with sharp interfaces or gradual transitions, with up to 5 tiers of different microsphere types. For proof-of-concept, concentration gradients of covalently immobilized proteins were also assembled. PEG microspheres containing heparin were also fabricated. PEG-heparin microspheres were incubated with fluorescently labeled protamine and used to form gradient scaffolds. The ability to form gradients in microspheres may prove to be useful to achieve better control over the kinetics of protein release from scaffolds or to generate gradients of immobilized growth factors.

Adapting biodegradable oligo(poly(ethylene glycol) fumarate) hydrogels for pigment epithelial cell encapsulation and lens regeneration

This study investigated the encapsulation of newt iris pigment epithelial cells (PECs), which have the ability to regenerate a lens by trans-differentiation in vivo, within a biodegradable hydrogel of oligo(poly(ethylene glycol) fumarate) crosslinked with poly(ethylene glycol)-diacrylate. Hydrogel beads of initial diameter of 1 mm were fabricated by a molding technique. The swelling ratio and degradation rate of the hydrogel beads decreased with increasing crosslinking ratios. Confocal microscopy confirmed the cytocompatibility of crosslinking hydrogel formulations as evidenced by the viability of an encapsulated model cell line within a crosslinked hydrogel bead. Hydrogel beads encapsulating iris PECs were also implanted into lentectomized newts in vivo; histological evaluation of explants after 30 days revealed a regenerated lens, thus demonstrating that the presence of degrading hydrogel did not adversely affect lens regeneration. The results of this study suggest the potential of a method for lens regeneration involving oligo(poly(ethylene glycol) fumarate) hydrogels for iris PEC encapsulation and transplantation.

Effects of TGF-beta3 and preculture period of osteogenic cells on the chondrogenic differentiation of rabbit marrow mesenchymal stem cells encapsulated in a bilayered hydrogel composite

In this work, injectable, biodegradable hydrogel composites of crosslinked oligo(poly(ethylene glycol) fumarate) and gelatin microparticles (MPs) were used to fabricate a bilayered osteochondral construct. Rabbit marrow mesenchymal stem cells (MSCs) were encapsulated with transforming growth factor-beta3 (TGF-beta3)-loaded MPs in the chondrogenic layer and cocultured with cells of different periods of osteogenic preculture (0, 3, 6 and 12 days) in the osteogenic layer to investigate the effects of TGF-beta3 delivery and coculture on the proliferation and differentiation of cells in both layers. The results showed that, in the chondrogenic layer, TGF-beta3 significantly stimulated chondrogenic differentiation of MSCs. In addition, cells of various osteogenic preculture periods in the osteogenic layer, along with TGF-beta3, enhanced gene expression for MSC chondrogenic markers to different extents. In the osteogenic layer, cells maintained their alkaline phosphatase activity during the coculture; however, mineralization was delayed by the presence of TGF-beta3. Overall, this study demonstrated the fabrication of bilayered hydrogel composites which mimic the structure and function of osteochondral tissue, along with the application of these composites as cell and growth factor carriers, while illustrating that encapsulated cells of different degrees of osteogenic differentiation can significantly influence the chondrogenic differentiation of cocultured progenitor cells in both the presence and absence of chondrogenic growth factors.

Three-dimensional porous biodegradable polymeric scaffolds fabricated with biodegradable hydrogel porogens

We have developed a new fabrication technique to create three-dimensional (3D) porous poly(epsilon-caprolactone fumarate) (PCLF) scaffolds using hydrogel microparticle porogens, as an alternative to overcome certain limitations of traditional scaffold fabrication techniques such as a salt leaching method. Both natural hydrogel, gelatin, and synthetic hydrogel, poly(ethylene glycol) sebacic acid diacrylate, were used as porogens to fabricate 3D porous PCLF scaffolds. Hydrogel microparticles were prepared by a single emulsion technique with the particle size in the range of 100-500 microm after equilibrium in water. The pore size distribution, porosity, pore interconnectivity, and spatial pore heterogeneity of the 3D PCLF scaffolds were assessed using micro-computed tomography and imaging analysis. Scaffolds fabricated with the hydrogel porogens had higher porosity and pore interconnectivity as well as more homogeneous spatial pore distribution, compared to the scaffolds made from the salt leaching process. Compressive moduli of the scaffolds were also measured and showed that lower porosity yielded greater modulus of the scaffolds. Overall, the new fabrication technology using hydrogel porogens may be beneficial for certain tissue engineering applications.

Time Controlled Protein Release from Layer-by-Layer Assembled Multilayer Functionalized Agarose Hydrogels

Axons of the adult central nervous system exhibit an extremely limited ability to regenerate after spinal cord injury. Experimentally generated patterns of axon growth are typically disorganized and randomly oriented. Support of linear axonal growth into spinal cord lesion sites has been demonstrated using arrays of uniaxial channels, templated with agarose hydrogel, and containing genetically engineered cells that secrete brain-derived neurotrophic factor (BDNF). However, immobilizing neurotrophic factors secreting cells within a scaffold is relatively cumbersome, and alternative strategies are needed to provide sustained release of BDNF from templated agarose scaffolds. Existing methods of loading the drug or protein into hydrogels cannot provide sustained release from templated agarose hydrogels. Alternatively, here it is shown that pH-responsive H-bonded poly(ethylene glycol)(PEG)/poly(acrylic acid)(PAA)/protein hybrid layer-by-layer (LbL) thin films, when prepared over agarose, provided sustained release of protein under physiological conditions for more than four weeks. Lysozyme, a protein similar in size and isoelectric point to BDNF, is released from the multilayers on the agarose and is biologically active during the earlier time points, with decreasing activity at later time points. This is the first demonstration of month-long sustained protein release from an agarose hydrogel, whereby the drug/protein is loaded separately from the agarose hydrogel fabrication process.

Structural properties of polysaccharide-based microcapsules for soft tissue regeneration

Autologous and eterologous cell encapsulation has been extensively studied for clinical application in functional organs substitution, recombinant cell transplantation in gene therapy or in muscle and cartilage regeneration to treat degenerative pathologies. In this work, calcium alginate, calcium alginate/chitosan, calcium alginate/gelatin and pectin/chitosan microcapsules were prepared to be used as innovative injectable scaffolds for soft issue regeneration by a simple extrusion method from aqueous solutions. Prepared microcapsules had spherical morphology, whereas their size was deeply influenced by the polymeric composition. When incubated in a physiological-like environment up to 30 days, they underwent an initial swelling, followed by weight loss at different rates, depending on the microcapsules formulation. The encapsulation of mouse myoblast cells (C2C12 cell line) was obtained in calcium alginate, calcium alginate/chitosan, calcium alginate/gelatin microcapsules. Cells were alive throughout the encapsulation procedure, and were recovered by a mechanical rupture of the microcapsules. After 7 days, fractured microcapsules led cells to migrate gradually out.

Repair of osteochondral defects with biodegradable hydrogel composites encapsulating marrow mesenchymal stem cells in a rabbit model

This work investigated the delivery of marrow mesenchymal stem cells (MSCs), with or without the growth factor transforming growth factor-beta1 (TGF-beta1), from biodegradable hydrogel composites on the repair of osteochondral defects in a rabbit model. Three formulations of oligo(poly(ethylene glycol) fumarate) (OPF) hydrogel composites containing gelatin microparticles (GMPs) and MSCs were implanted in osteochondral defects, including (i) OPF/GMP hydrogel composites; (ii) OPF/GMP hydrogel composites encapsulating MSCs; and (iii) OPF hydrogel composites containing TGF-beta1-loaded GMPs and MSCs. At 12weeks, the quality of new tissue formed in chondral and subchondral regions of defects was evaluated based on subjective and quantitative histological analysis. OPF hydrogel composites were partially degraded and the defects were filled with newly formed tissue at 12weeks with no sign of persistent inflammation. With the implantation of scaffolds alone, newly formed chondral tissue had an appearance of hyaline cartilage with zonal organization and intense staining for glycosaminoglycans, while in the subchondral region hypertrophic cartilage with some extent of bone formation was often observed. The addition of MSCs, especially with TGF-beta1-loaded GMPs, facilitated subchondral bone formation, as evidenced by more trabecular bone appearance. However, the delivery of MSCs with or without TGF-beta1 at the dosage investigated did not improve cartilage morphology. While OPF-based hydrogel composites supported osteochondral tissue generation, further investigations are necessary to elucidate the effects of MSC seeding density and differentiation stage on new tissue formation and regeneration.

Porcine gelatin microsphere/calcium phosphate cement composites: an in vitro degradation study

Scaffolds for bone tissue engineering preferably should be mechanically stable, osteoconductive, biodegradable and porous. To comply with these characteristics, calcium phosphate cements (CPCs) with porcine (type A) gelatin microspheres were formulated. In this experiment, in vitro degradation of 10 wt % gelatin type A microsphere CPCs (GELA CPCs) was followed for 12 weeks in proteolytic medium. Results showed a gradual decrease in mass, compression strength and E-modulus. Morphology investigation showed that degradation of the spheres started at the surface of the composite and gradually proceeded to the inner part. Overall, porcine gelatin microspheres can be used to generate in situ macroporosity into an injectable CPC.

Controlled growth factor delivery for tissue engineering

Growth factors play a crucial role in information transfer between cells and their microenvironment in tissue engineering and regeneration. They initiate their action by binding to specific receptors on the surface of target cells and the chemical identity, concentration, duration, and context of these growth factors contain information that dictates cell fate. Hence, the importance of exogenous delivery of these molecules in tissue engineering is unsurprising, considering their importance for tissue regeneration. However, the short half-lives of growth factors, their relatively large size, slow tissue penetration, and their potential toxicity at high systemic levels, suggest that conventional routes of administration are unlikely to be effective. In this review, we provide an overview of the design criteria for growth factor delivery vehicles with respect to the growth factor itself and the microenvironment for delivery. We discuss various methodologies that could be adopted to achieve this localized delivery, and strategies using polymers as delivery vehicles in particular.

Liposome-hydrogel bead complexes prepared via biotin-avidin conjugation

Liposomes immobilized onto polymeric hydrogel microbeads have potential advantages both in tissue engineering applications and as drug delivery vehicles. Here we demonstrate, quantify, and optimize lipid vesicle binding to polymeric hydrogel microbeads via the avidin-biotin conjugation system and characterize the stability of the resulting microgel-bound liposomes. Microgels consisting of a copolymer of N-isopropylacrylamide (NIPAM) and acrylic acid (AA), cross-linked with bis-acrylamide, that is, p(NIPAM-co-AA), were biotinylated using aqueous carbodiimide chemistry. Extruded liposomes consisting of 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC) plus a small fraction of a biotin-derivatized phosphatidylethanolamine (B-PE) were saturated with avidin and allowed to bind to biotinylated hydrogel beads. Using a combination of fluorescence spectroscopy, quenching, and microscopy and 31P NMR static and magic angle spinning (MAS) spectroscopies, we demonstrate conditions for near-quantitative liposome binding to p(NIPAM-co-AA) microbeads and show that liposome fusion does not occur under such conditions, that the liposomes remain intact and impermeable when so bound, and that they can function as slow release vehicles for entrapped aqueous species.

Novel injectable gel (system) as a vehicle for human articular chondrocytes in cartilage tissue regeneration

We developed a novel injectable carrageenan/fibrin/hyaluronic acid-based hydrogel with in situ gelling properties to be seeded with chondrogenic cells and used for cartilage tissue engineering applications. We first analysed the distribution within the hydrogel construct and the phenotype of human articular chondrocytes (HACs) cultured for 3 weeks in vitro. We observed a statistically significant increase in the cell number during the first 2 weeks and maintenance of cell viability throughout the cell culture, together with the deposition/formation of a cartilage-specific extracellular matrix (ECM). Taking advantage of a new in vivo model that allows the integration between newly formed and preexisting cartilage in immunodeficient mice to be investigated, we showed that injectable hydrogel seeded with human articular chondrocytes was able to regenerate and repair an experimentally made lesion in bovine articular cartilage, thus demonstrating the potential of this novel cell delivery system for cartilage tissue engineering.

In vitro generation of an osteochondral construct using injectable hydrogel composites encapsulating rabbit marrow mesenchymal stem cells

Injectable, biodegradable hydrogel composites of crosslinked oligo(poly(ethylene glycol) fumarate) (OPF) and gelatin microparticles (MPs) were utilized to fabricate a bilayered osteochondral construct consisting of a chondrogenic layer and an osteogenic layer, and to investigate the differentiation of rabbit marrow mesenchymal stem cells (MSCs) encapsulated in both layers in vitro. The results showed that MSCs in the chondrogenic layer were able to undergo chondrogenic differentiation, especially in the presence of TGF-beta1-loaded MPs. In the osteogenic layer, cells maintained their osteoblastic phenotype. Although calcium deposition in the osteogenic layer was limited, cells in the osteogenic layer significantly enhanced chondrogenic differentiation of MSCs in the chondrogenic layer. The greatest effect was observed when MSCs were encapsulated with TGF-beta1-loaded MPs and cultured with osteogenic cells in the bilayered constructs. Overall, this study demonstrates the fabrication of bilayered hydrogel composites that mimic the structure and function of osteochondral tissue, along with the application of these composites as cell and growth factor carriers.

Biomimetic strategies based on viruses and bacteria for the development of immune evasive biomaterials

The field of biomaterials has begun to focus upon materials strategies for modulating the immune response. While certain approaches appear promising, they are currently limited to isolated facets of inflammation process. It is well documented that both bacteria and viruses have highly developed methods for evading the immune system, providing inspiration for a more biomimetic approach to materials design. This review presents the immune evasive tactics employed by viruses and bacteria, and offers suggestions for future directions that apply these principles to design of immune evasive biomaterials.