Self-assembled star-shaped chlorin-core poly(epsilon-caprolactone)-poly(ethylene glycol) diblock copolymer micelles for dual chemo-photodynamic therapies

Multimodal image-guided photothermal therapy mediated by 188Re-labeled micelles containing a cyanine-type photosensitizer

Multifunctional micelles loaded with the near-infrared (NIR) dye and labeled with the radionuclide rhenium-188 ((188)Re) have been developed to provide multimodalities for NIR fluorescence and nuclear imaging and for photothermal therapy (PTT) of cancer. The NIR dye, IR-780 iodide, allowed the micelles to have dual functions in cancer NIR imaging and PTT. The (188)Re-labeled IR-780 micelles enabled imaging by NIR fluorescence and by microSPECT to guide the delivery of drugs and to monitor in real-time the tumor accumulation, intratumoral distribution, and kinetics of drug release, which serve as a basis of specific photothermal injury to the targeted tissue. We also investigated the biodistribution, generation of heat, and photothermal cancer ablation of IR-780 micelles of both in vitro and in vivo xenografts. Histopathology observed irreversible tissue damage, such as necrotic features, decreased cell proliferation, increased apoptosis of cells, and increased expression of heat shock proteins in the PTT-treated tumors. The (188)Re-labeled IR-780 micelles offer multifunctional modalities for NIR fluorescence and nuclear imaging and for PTT of cancer.

Development of thermosensitive poly(n-isopropylacrylamide-co-((2-dimethylamino) ethyl methacrylate))-based nanoparticles for controlled drug release

Thermosensitive nanoparticles based on poly(N-isopropylacrylamide-co-((2-dimethylamino)ethylmethacrylate)) (poly(NIPA-co-DMAEMA)) copolymers were successfully fabricated by free radical polymerization. The lower critical solution temperature (LCST) of the synthesized nanoparticles was 41 °C and a temperature above which would cause the nanoparticles to undergo a volume phase transition from 140 to 100 nm, which could result in the expulsion of encapsulated drugs. Therefore, we used the poly(NIPA-co-DMAEMA) nanoparticles as a carrier for the controlled release of a hydrophobic anticancer agent, 7-ethyl-10-hydroxy-camptothecin (SN-38). The encapsulation efficiency and loading content of SN-38-loaded nanoparticles at an SN-38/poly(NIPA-co-DMAEMA) ratio of 1/10 (D/P = 1/10) were about 80% and 6.293%, respectively. Moreover, the release profile of SN-38-loaded nanoparticles revealed that the release rate at 42 °C (above LCST) was higher than that at 37 °C (below LCST), which demonstrated that the release of SN-38 could be controlled by increasing the temperature. The cytotoxicity of the SN-38-loaded poly(NIPA-co-DMAEMA) nanoparticles was investigated in human colon cancer cells (HT-29) to compare with the treatment of an anticancer drug, Irinotecan(®) (CPT-11). The antitumor efficacy evaluated in a C26 murine colon tumor model showed that the SN-38-loaded nanoparticles in combination with hyperthermia therapy efficiently suppressed tumor growth. The results indicate that these thermo-responsive nanoparticles are potential carriers for controlled drug delivery.

Advances in novel drug delivery strategies for breast cancer therapy

Breast cancer remains one of the world's most devastating diseases. However, better understanding of tumor biology and improved diagnostic devices could lead to improved therapeutic outcomes. Nanotechnology has the potential to revolutionize cancer diagnosis and therapy. Various nanocarriers have been introduced to improve the therapeutic efficacy of anticancer drugs, including liposomes, polymeric micelles, quantum dots, nanoparticles, and dendrimers. Recently, targeted drug delivery systems for anti-tumor drugs have demonstrated great potential to lower cytotoxicity and increase therapeutic effects. Various ligands/approaches have been explored for targeting breast cancer. This paper provides an overview of breast cancer, conventional therapy, potential of nanotechnology in management of breast cancer, and rational approaches for targeting breast cancer.

Aliphatic polyester polymer stars: synthesis, properties and applications in biomedicine and nanotechnology

A critical review: the ring-opening polymerization of cyclic esters provides access to an array of biodegradable, bioassimilable and renewable polymeric materials. Building these aliphatic polyester polymers into larger macromolecular frameworks provides further control over polymer characteristics and opens up unique applications. Polymer stars, where multiple arms radiate from a single core molecule, have found particular utility in the areas of drug delivery and nanotechnology. A challenge in this field is in understanding the impact of altering synthetic variables on polymer properties. We review the synthesis and characterization of aliphatic polyester polymer stars, focusing on polymers originating from lactide, ε-caprolactone, glycolide, β-butyrolactone and trimethylene carbonate monomers and their copolymers including coverage of polyester miktoarm star copolymers. These macromolecular materials are further categorized by core molecules, catalysts employed, self-assembly and degradation properties and the resulting fields of application (262 references).

Fluorescent polyurethane nanofabrics: a source of singlet oxygen and oxygen sensing

Polyurethane (PUR) nanofabrics based on nanofibers of average diameters in the range of 250-110 nm with different meso-tetraphenylporphyrin (TPP) loading (0.01-5 wt %) were prepared by an electrospinning process. The oxygen quenching of excited states and singlet oxygen-sensitized delayed fluorescence (SODF) of TPP were studied at different oxygen pressures. We found that TPP in PUR matrix is present in monomeric state, and it is easily accessed by oxygen. Analysis of the kinetics of the TPP triplet, singlet oxygen, and SODF indicates that repopulation of TPP fluorescent state includes reaction of singlet oxygen with TPP triplets. The integrated SODF achieved more than 20% of the prompt fluorescence for nanofabric loaded with 5 wt % TPP. The dependence of SODF intensity on the TPP concentration in nanofibers is nearly quadratic.

Biodegradable self-assembled PEG-PCL-PEG micelles for hydrophobic honokiol delivery: I. Preparation and characterization

This study aims to develop self-assembled poly(ethylene glycol)-poly(epsilon-caprolactone)-poly(ethylene glycol) (PEG-PCL-PEG, PECE) micelles to encapsulate hydrophobic honokiol (HK) in order to overcome its poor water solubility and to meet the requirement of intravenous administration. Honokiol loaded micelles (HK-micelles) were prepared by self-assembly of PECE copolymer in aqueous solution, triggered by its amphiphilic characteristic assisted by ultrasonication without any organic solvents, surfactants and vigorous stirring. The particle size of the prepared HK-micelles measured by Malvern laser particle size analyzer were 58 nm, which is small enough to be a candidate for an intravenous drug delivery system. Furthermore, the HK-micelles could be lyophilized into powder without any adjuvant, and the re-dissolved HK-micelles are stable and homogeneous with particle size about 61 nm. Furthermore, the in vitro release profile showed a significant difference between the rapid release of free HK and the much slower and sustained release of HK-micelles. Moreover, the cytotoxicity results of blank micelles and HK-micelles showed that the PECE micelle was a safe carrier and the encapsulated HK retained its potent antitumor effect. In short, the HK-micelles were successfully prepared by an improved method and might be promising carriers for intravenous delivery of HK in cancer chemotherapy, being effective, stable, safe (organic solvent and surfactant free), and easy to produce and scale up.

Development of pH sensitive 2-(diisopropylamino)ethyl methacrylate based nanoparticles for photodynamic therapy

Photodynamic therapy is an effective treatment for tumors that involves the administration of light-activated photosensitizers. However, most photosensitizers are insoluble and non-specific. To target the acid environment of tumor sites, we synthesized three poly(ethylene glycol) methacrylate-co-2-(diisopropylamino)ethyl methacrylate (PEGMA-co-DPA) copolymers capable of self-assembly to form pH sensitive nanoparticles in an aqueous environment, as a means of encapsulating the water-insoluble photosensitizer, meso-tetra(hydroxyphenyl)chlorin (m-THPC). The critical aggregation pH of the PEGMA-co-DPA polymers was 5.8-6.6 and the critical aggregation concentration was 0.0045-0.0089 wt% at pH 7.4. Using solvent evaporation, m-THPC loaded nanoparticles were prepared with a high drug encapsulation efficiency (approximately 89%). Dynamic light scattering and transmission electron microscopy revealed the spherical shape and 132 nm diameter of the nanoparticles. The in vitro release rate of m-THPC at pH 5.0 was faster than at pH 7.0 (58% versus 10% m-THPC released within 48 h, respectively). The in vitro photodynamic therapy efficiency was tested with the HT-29 cell line. m-THPC loaded PEGMA-co-DPA nanoparticles exhibited obvious phototoxicity in HT-29 colon cancer cells after light irradiation. The results indicate that these pH sensitive nanoparticles are potential carriers for tumor targeting and photodynamic therapy.

Methylene blue-encapsulated phosphonate-terminated silica nanoparticles for simultaneous in vivo imaging and photodynamic therapy

A bifunctional nanoparticles-based carrier for simultaneous in vivo imaging and photodynamic therapy by encapsulating methylene blue (MB) alone in the phosphonate-terminated silica matrix has been developed. The phosphonate-terminated silica nanoparticles, entrapping water-soluble photosensitizer MB (MB-encapsulated PSiNPs), are synthesized by the controlled synchronous hydrolysis of tetraethoxysilane and trihydroxyl silyl propyl methyl phosphonate in the water-in-oil microemulsion. The resulting MB-encapsulated PSiNPs effectively prevent the leakage of entrapped MB from the particles and provide protection for against reduction by diaphorase. Enough dose of irradiation to the MB-encapsulated PSiNPs under the light of 635 nm results in efficient generation of singlet oxygen and induces photodynamic damage to Hela cells. Furthermore, the non-invasive visualization of MB-encapsulated PSiNPs in mice under the in vivo imaging system confirmed the MB-encapsulated PSiNPs also presents near-infrared luminescence for in vivo imaging. And the effect of the PDT toward the xenograft tumor in vivo is exciting after imaging the MB-encapsulated PSiNPs injected tumor using in vivo optical imaging system. Thus, the single particle platform is effective for simultaneous in vivo imaging and photodynamic therapy without using extra agent, which can provide image-guidance for site-specific photodynamic therapy.

Design and development of dendrimer photosensitizer-incorporated polymeric micelles for enhanced photodynamic therapy

Photodynamic therapy (PDT), which involves systemic administration of photosensitizers (PSs) followed by local photoillumination, is a promising method for the treatment of solid tumors and other diseases. Recently, considerable efforts have been devoted to the development of nanocarriers for the PS delivery with the aim of avoiding non-specific phototoxicity to normal tissues such as the skin. Here, we discuss the biological significance of the use of nanocarrier-encapsulated PSs in PDT. Also, we report our recent achievements on the development of dendrimer photosensitizer-loaded micelles as nanocarriers for PS delivery. We found that our nanocarriers greatly enhanced the PDT efficacy in vitro and in vivo, and also significantly reduced the skin phototoxicity. These results indicate the importance of a development strategy for nanocarriers and their great potential for clinical use. In addition, this review discusses the development of nanocarriers for emerging PDT-related technologies such as photodynamic diagnosis (PDD) and photochemical internalization (PCI).

Dual chemotherapy and photodynamic therapy in an HT-29 human colon cancer xenograft model using SN-38-loaded chlorin-core star block copolymer micelles

Chlorin-core star-shaped block copolymer (CSBC) may self-assemble to form micelles, which act as nanosized photosensitizing agents for photodynamic therapy (PDT) and further encapsulate hydrophobic drugs. This functionalized micellar delivery system is a potential dual carrier for the synergistic combination of photodynamic therapy and chemotherapy for the treatment of cancer. In this study, SN-38 encapsulated CSBC micelles were successfully prepared using a lyophilization-hydration method. Our results show that the prolonged plasma residence time of SN-38/CSBC micelles as compared with free CPT-11 permit increased tumor accumulation and consequently, improved antitumor activity. The combined effects of SN-38/CSBC micelles with PDT were evaluated in an HT-29 human colon cancer xenograft model. Interesting, SN-38/CSBC-mediated PDT synergistically inhibited tumor growth, resulting in up to 60% complete regression of well-established tumors after 3 treatments. These treatments also decreased the microvessel density (MVD) and cell proliferation within the subcutaneous tumors. Therefore, this SN-38/CBSC delivery system has the potential to offer dual therapies for the synergistic combination of PDT and chemotherapy for the treatment of cancer.

Imperfect dissolution in nonionic block copolymer and surfactant mixtures

Self-assembled copolymer micelles have been widely explored for numerous applications including cosmetic formulations and detergency, drug delivery, and agriculture. In many of these technologies at least trace amounts of surfactants and detergents are present, yet little is known regarding their effect on the copolymer micelle structure. In this paper we examine the influence of a nonionic micelle-forming surfactant, Triton X-100, on spherical, nonionic polymeric micelles composed of poly(butadiene)-co-poly(polyethylene oxide). Using cryo-TEM we find that relatively small surfactant concentrations (less than 1:1 molar ratio) are sufficient to disrupt the copolymer assemblies, and to yield, via dimerization, mixed polymer-surfactant micelles with characteristic diameters. Saturation of the polymeric micelles is reached with approximately 3 mM surfactant (1:8 mol ratio). Upon saturation, and in high surfactant excess, coexistence of two homogeneous micellar populations is found: saturated polymer-surfactant micelles, and much smaller micelles of pure surfactant. The lack of complete demicellization of the polymeric micelles is explained by packing constraints of the polymer hydrophobic chains by the added surfactant. This behavior is found to be characteristic of polymeric molecules with hydrophobic-to-hydrophilic molecular weight ratio close to, or exceeding, 0.75. We further found that structural transitions in polymer-surfactant mixtures are fast, and the systems reach equilibrium at time scales characteristic to the small molecule, in contrast with the slow equilibration in polymer-polymer mixtures.