Delivery systems for antimicrobial peptides

Effects of charge contrast and composition on microgel formation and interactions with bacteria-mimicking liposomes

Microgels offer opportunities for improved delivery of antimicrobial peptides (AMP). To contribute to a foundation for rational design of such systems, we here study the effects of electrostatics on the generation of peptide-carrying microgels. For this, alginate microgels loaded with polymyxin B and cross-linked by Ca²⁺, were formed by electrostatic complexation using a hydrodynamic focusing three-dimensional (3D)-printed micromixer, varying pH and component concentrations. The structure of the resulting composite nanoparticles was investigated by small-angle X-ray scattering, dynamic light scattering, and z-potential measurements, whereas peptide encapsulation and release was monitored spectrophotometrically. Furthermore, membrane interactions of these systems were assessed by dye leakage assays in model lipid vesicles. Our results indicate that charge contrast between polymyxin B and alginate during microgel formation affects particle size and network dimensions. In particular, while microgels prepared at maximum polymyxin B-alginate charge contrast at pH 5 and 7.4 are characterized by sharp interfaces, those formed at pH 9 are characterized by a more diffuse core, likely caused by a weaker peptide-polymer affinity, and a shell dominated by alginate that shrinks at high CaCl₂ concentrations. Quantitatively, however, these effects were relatively minor, as were differences in peptide encapsulation efficiency and electrolyte-induced peptide release. This demonstrates that rather wide charge contrasts allow efficient complexation and particle formation, with polymyxin B encapsulated within the particle interior at low ionic strength, but released at high electrolyte concentration. As a consequence of this, peptide-mediated membrane destabilization were suppressed by microgel incorporation at low ionic strength, but regained after microgel disruption. After particle disruption at high ionic strength, however, some polymyxin B was found to remain bound to alginate chains from the disrupted composite microgel particles, resulting in partial loss in membrane interactions, compared to the free peptide.

Nanosystems as Vehicles for the Delivery of Antimicrobial Peptides (AMPs)

Recently, antimicrobial peptides (AMPs), also called host defence peptides (HDPs), are attracting great interest, as they are a highly viable alternative in the search of new approaches to the resistance presented by bacteria against antibiotics in infectious diseases. However, due to their nature, they present a series of disadvantages such as low bioavailability, easy degradability by proteases, or low solubility, among others, which limits their use as antimicrobial agents. For all these reasons, the use of vehicles for the delivery of AMPs, such as polymers, nanoparticles, micelles, carbon nanotubes, dendrimers, and other types of systems, allows the use of AMPs as a real alternative to treatment with antibiotics.

Self-Assembled Peptide Nanofibers Display Natural Antimicrobial Peptides to Selectively Kill Bacteria without Compromising Cytocompatibility

One of the major hurdles in the development of antimicrobial peptide (AMP)-based materials is their poor capacity in selectively killing bacteria without harming nearby mammalian cells. Namely, they are antimicrobial but cytotoxic. Current methods of nanoparticle-encapsulated AMPs to target bacteria selectively still have not yet overcome this hurdle. Here, we demonstrate a simple yet effective method to address this daunting challenge by associating a natural AMP with a β-sheet-forming synthetic peptide. The integrated peptides self-assembled to form a supramolecular nanofiber, resulting in the presentation of the AMP at the nanofiber-solvent interface in a precisely controlled manner. Using melittin as a model natural AMP, we found that the conformation of melittin changed dramatically when presented on the nanofiber surface, which, in turn, modulated the induced membrane permeability of the bacterial and mammalian cell membranes. Specifically, the presentation of melittin on the nanofiber restricted its hydrophobic residues, leading to a reduction of the hydrophobic interaction with lipids in the cell membranes. Compellingly, the reduced hydrophobic interaction led to a considerable decrease of melittin's induced permeability of the mammalian cell membrane than that of the bacterial cell membrane. As a result, the AMP-displaying nanofiber preferentially permeabilized and disrupted the membrane of the bacteria without compromising the mammalian cells. Such improved membrane selectivity and cytocompatibility were confirmed in a cell-based membrane localization and live-dead assay. Our new strategy holds great promise for fabricating cytocompatible antimicrobial assemblies that offer safer and more effective administration of therapeutic AMPs. These assemblies, with intrinsic antimicrobial activity and cytocompatibility, can also serve as building blocks for the construction of higher-ordered scaffolds for other biomedical applications such as tissue engineering and regenerative medicine.

Complexation between antimicrobial peptides and polyelectrolytes

As a result of increasing bacterial resistance against antibiotics, we are facing an emerging health crisis, in which 'simple' infections may no longer be treatable. One class of molecules attracting interest in this context is antimicrobial peptides (AMPs), and considerable research efforts have been directed to identifying selective and potent AMPs. In addition, since in vivo delivery of AMPs is challenging, there is an emerging awareness that successful development of AMP therapeutics can be facilitated by careful design of AMPs delivery systems. In the present overview, we discuss polyelectrolyte complexation as a strategy to deliver AMPs. In doing so, key factors for AMP-polyelectrolyte complexation are illustrated for AMP-polyelectrolyte nanoparticle formation, as well as for AMP incorporation in polyelectrolyte microgels and multilayer structures, and consequences of these for functional performance exemplified.

Counterion Exchange in Peptide-Complexed Core-Shell Microgels

The complexation of polyvalent macroions with oppositely charged polyelectrolyte microgels can lead to core-shell structures. The shell is believed to be highly deswollen with a high concentration of counter-macroions. The core is believed to be relatively free of macroions but under a uniform compressive stress due to the deswollen shell. We use cryo-scanning electron microscopy (SEM) with X-ray microanalysis to confirm this understanding. We study poly(acrylic acid) (PAA) microgels which form a core-shell structure when complexed with a small cationic antimicrobial peptide (L5). We follow the spatial distribution of polymer, water, Na counterions, and peptide based on the characteristic X-ray intensities of C, O, Na, and N, respectively. Frozen-hydrated microgel suspensions include buffers of known composition from which calibration curves can be generated and used to quantify both the microgel water and sodium concentrations, the latter with a minimum quantifiable concentration less than 0.048 M. We find that as-synthesized PAA microgels are enriched in Na relative to the surrounding buffer as anticipated from established ideas of counterion shielding of electrostatic charge. The shell in L5-complexed microgels is depleted in Na and enriched in peptide and contains relatively little water. Our measurements furthermore show that shell/core interface is diffuse over a length scale of a few micrometers. Within the limits of detection, the core Na concentration is the same as that in as-synthesized microgels, and the core is free of peptide. The core has a slightly lower water concentration than as-synthesized controls, consistent with the hypothesis that the core is under compression from the shell.

Repurposing Azithromycin and Rifampicin Against Gram-Negative Pathogens by Combination With Peptidomimetics

Synthetic peptidomimetics may be designed to mimic functions of antimicrobial peptides, including potentiation of antibiotics, yet possessing improved pharmacological properties. Pairwise screening of 42 synthetic peptidomimetics combined with the antibiotics azithromycin and rifampicin in multidrug-resistant (MDR) Escherichia coli ST131 and Klebsiella pneumoniae ST258 led to identification of two subclasses of α-peptide/β-peptoid hybrids that display synergy with azithromycin and rifampicin (fractional inhibitory concentration indexes of 0.03–0.38). Further screening of the best three peptidomimetics in combination with a panel of 21 additional antibiotics led to identification of peptidomimetics that potentiated ticarcillin/clavulanate and erythromycin against E. coli, and clindamycin against K. pneumoniae. The study of six peptidomimetics was extended to Pseudomonas aeruginosa, confirming synergy with antibiotics for five of them. The most promising compound, H-(Lys-βNPhe)₈-NH₂, exerted only a minor effect on the viability of mammalian cells (EC₅₀ ≥ 124–210 μM), and thus exhibited the highest selectivity toward bacteria. This compound also synergized with rifampicin and azithromycin at sub-micromolar concentrations (0.25–0.5 μM), thereby inducing susceptibility to these antibiotics at clinically relevant concentrations in clinical MDR isolates. This peptidomimetic lead and its analogs constitute promising candidates for efficient repurposing of rifampicin and azithromycin against Gram-negative pathogens.

A comparison of different strategies for antimicrobial peptides incorporation onto/into lipid nanocapsules

Aim: Over the last decade, antimicrobial peptides (AMPs) have emerged as a promising alternative for the treatment of various infections. The aim of this work is to explore the potential of lipid nanocapsules for the delivery of AMPs. Three approaches were compared in terms of encapsulation efficiency, peptide activity and protection against proteases: peptide encapsulation, surface adsorption or covalent attachment of three selected AMPs. Results: A potentiation of the antimicrobial activity and a partial protection of the peptides after adsorption were demonstrated compared with native peptides. Conversely, encapsulation allowed better peptide stability, correlated with higher encapsulation efficiencies and a preservation of the activity. Finally, the covalent attachment strategy turned out to be less conclusive due to peptide inactivation. Conclusion: In brief, a lipid nanocapsule-based platform appears suitable to deliver AMPs.

Biopolymeric pellets of polyvinyl alcohol and alginate for the encapsulation of Ib-M6 peptide and its antimicrobial activity against E. coli

The encapsulation of Ib-M6 antibacterial peptide in pellets of polyvinyl alcohol (PVA) and polyvinyl alcohol-alginate (PVA-Alg) matrices was carried out in order to explore its controlled release and activity against Escherichia coli K-12. The pellets were obtained by combined ice segregation induced self-assembly (ISISA) and freezing-thawing methods and their microstructure was studied by scanning electron microscopy. Bromothymol blue was used as a model compound to study the transport mechanisms and release from pellets. The results show that there is a significant effect of the total concentration of PVA precursor solutions, the mass ratio of PVA of different molecular weights and the addition of alginate on the microstructure and transport properties of pellets. The antibacterial activity of Ib-M6 against Escherichia coli K-12 was not affected by the encapsulation in PVA pellets. However, the release of Ib-M6 from PVA-Alg pellets was not possible, probably due to the electrostatic interaction of positively charged Ib-M6 and negatively alginate structure. Nonetheless, the controlled release of Ib-M6 from polymeric matrices can be fitting by modifying parameters such as the concentration and type of polymer precursors.

Characterization of the in vitro, ex vivo, and in vivo Efficacy of the Antimicrobial Peptide DPK-060 Used for Topical Treatment

Antimicrobial peptides, also known as host defense peptides, have recently emerged as a promising new category of therapeutic agents for the treatment of infectious diseases. This study evaluated the preclinical in vitro, ex vivo, and in vivo antimicrobial activity, as well as the potential to cause skin irritation, of human kininogen-derived antimicrobial peptide DPK-060 in different formulations designed for topical delivery. We found that DPK-060 formulated in acetate buffer or poloxamer gel caused a marked reduction of bacterial counts of Staphylococcus aureus in vitro (minimum microbicidal concentration <5 μg/ml). We also found that DPK-060 in poloxamer gel significantly suppressed microbial survival in an ex vivo wound infection model using pig skin and in an in vivo mouse model of surgical site infection (≥99 or ≥94% reduction in bacterial counts was achieved with 1% DPK-060 at 4 h post-treatment, respectively). Encapsulation of DPK-060 in different types of lipid nanocapsules or cubosomes did not improve the bactericidal potential of the peptide under the applied test conditions. No reduction in cell viability was observed in response to administration of DPK-060 in any of the formulations tested. In conclusion, the present study confirms that DPK-060 has the potential to be an effective and safe drug candidate for the topical treatment of microbial infections; however, adsorption of the peptide to nanocarriers failed to show any additional benefits.

Interaction of Laponite with Membrane Components-Consequences for Bacterial Aggregation and Infection Confinement

The antimicrobial effects of Laponite nanoparticles with or without loading of the antimicrobial peptide LL-37 was investigated along with their membrane interactions. The study combines data from ellipsometry, circular dichroism, fluorescence spectroscopy, particle size/ζ potential measurements, and confocal microscopy. As a result of the net negative charge of Laponite, loading of net positively charged LL-37 increases with increasing pH. The peptide was found to bind primarily to the outer surface of the Laponite nanoparticles in a predominantly helical conformation, leading to charge reversal. Despite their net positive charge, peptide-loaded Laponite nanoparticles did not kill Gram-negative Escherichia coli bacteria or disrupt anionic model liposomes. They did however cause bacteria flocculation, originating from the interaction of Laponite and bacterial lipopolysaccharide (LPS). Free LL-37, in contrast, is potently antimicrobial through membrane disruption but does not induce bacterial aggregation in the concentration range investigated. Through LL-37 loading of Laponite nanoparticles, the combined effects of bacterial flocculation and membrane lysis are observed. However, bacteria aggregation seems to be limited to Gram-negative bacteria as Laponite did not cause flocculation of Gram-positive Bacillus subtilis bacteria nor did it bind to lipoteichoic acid from bacterial envelopes. Taken together, the present investigation reports several novel phenomena by demonstrating that nanoparticle charge does not invariably control membrane destabilization and by identifying the ability of anionic Laponite nanoparticles to effectively flocculate Gram-negative bacteria through LPS binding. As demonstrated in cell experiments, such aggregation results in diminished LPS-induced cell activation, thus outlining a promising approach for confinement of infection and inflammation caused by such pathogens.

Carbosilane Dendron-Peptide Nanoconjugates as Antimicrobial Agents

Over the last decades, multidrug-resistant bacteria have emerged and spread, increasing the number of bacteria, against which commonly used antibiotics are no longer effective. It has become a serious public health problem whose solution requires medical research in order to explore novel effective antimicrobial molecules. On the one hand, antimicrobial peptides (AMPs) are regarded as good alternatives because of their generally broad-spectrum activities, but sometimes they can be easily degraded by the organism or be toxic to animal cells. On the other hand, cationic carbosilane dendrons, whose focal point can be functionalized in many different ways, have also shown good antimicrobial activity. In this work, we synthetized first- and second-generation cationic carbosilane dendrons with a maleimide molecule on their focal point, enabling their functionalization with three different AMPs. After different microbiology studies, we found an additive effect between first-generation dendron and AMP3 whose study reveals three interesting effects: (i) bacteria aggregation due to AMP3, which could facilitate bacteria detection or even contribute to antibacterial activity by preventing host cell attack, (ii) bacteria disaggregation capability of second-generation cationic dendrons, and (iii) a higher AMP3 aggregation ability when dendrons were added previously to peptide treatment. These compounds and their different effects observed over bacteria constitute an interesting system for further mechanism studies.

Aurein-Derived Antimicrobial Peptides Formulated with Pegylated Phospholipid Micelles to Target Methicillin-Resistant Staphylococcus aureus Skin Infections

Antimicrobial peptides have been the focus of considerable research; however, issues associated with toxicity and aggregation have the potential to limit clinical applications. Here, a derivative of a truncated version of aurein 2.2 (aurein 2.2Δ3), namely peptide 73, was investigated, along with its d-amino acid counterpart (D-73) and a retro-inverso version (RI-73). A version that incorporated a cysteine residue to the C-terminus (73c) was also generated, as this form is required to covalently attach antimicrobial peptides to polymers (e.g., polyethylene glycol (PEG) or hyperbranched polyglycerol (HPG)). The antimicrobial activity of the 73-derived peptides was enhanced 2- to 8-fold, and all the derivatives eradicated preformed Staphylococcus aureus biofilms. Formulation of the peptides with compatible polyethylene glycol (PEG)-modified phospholipid micelles alleviated toxicity toward human cells and reduced aggregation. When evaluated in vivo, the unformulated d-enantiomers aggregated when injected under the skin of mice, but micelle encapsulated peptides were well absorbed. Pegylated micelle formulated peptides were investigated for their potential as therapeutic agents for treating high-density infections in a murine cutaneous abscess model. Formulated peptide 73 reduced abscess size by 36% and bacterial loads by 2.2-fold compared to the parent peptide aurein 2.2Δ3. Micelle encapsulated peptides 73c and D-73 exhibited superior activity, further reducing abscess sizes by 85% and 63% and lowering bacterial loads by 510- and 9-fold compared to peptide 73.

Reassessing the Host Defense Peptide Landscape

Current research has demonstrated that small cationic amphipathic peptides have strong potential not only as antimicrobials, but also as antibiofilm agents, immune modulators, and anti-inflammatories. Although traditionally termed antimicrobial peptides (AMPs) these additional roles have prompted a shift in terminology to use the broader term host defense peptides (HDPs) to capture the multi-functional nature of these molecules. In this review, we critically examined the role of AMPs and HDPs in infectious diseases and inflammation. It is generally accepted that HDPs are multi-faceted mediators of a wide range of biological processes, with individual activities dependent on their polypeptide sequence. In this context, we explore the concept of chemical space as it applies to HDPs and hypothesize that the various functions and activities of this class of molecule exist on independent but overlapping activity landscapes. Finally, we outline several emerging functions and roles of HDPs and highlight how an improved understanding of these processes can potentially be leveraged to more fully realize the therapeutic promise of HDPs.

From Structure to Function: pH-Switchable Antimicrobial Nano-Self-Assemblies

Stimuli-responsive nanocarriers based on lipid self-assemblies have the potential to provide targeted delivery of antimicrobial peptides, limiting their side effects while protecting them from degradation in the biological environments. In the present study, we design and characterize a simple pH-responsive antimicrobial nanomaterial, formed through the self-assembly of oleic acid (OA) with the human cathelicidin LL-37 as a model for an amphiphilic antimicrobial peptide. Colloidal transformations from core-shell cylindrical micelles with a cross-sectional diameter of ∼5.5 nm and a length of ∼23 nm at pH 7.0 to aggregates of branched threadlike micelles at pH 5.0 were detected using synchrotron small-angle X-ray scattering, cryogenic transmission electron microscopy, and dynamic light scattering. Biological in vitro assays using an Escherichia coli bacteria strain showed high antimicrobial activity of the positively charged LL-37/OA aggregates at pH 5.0, which was not caused by the pH conditions themselves. Contrary to that, negligible antimicrobial activity was observed at pH 7.0 for the negatively charged cylindrical micelles. The nanocarrier's ability to switch its biological activity "on" and "off" in response to changes in pH could be used to focus the antimicrobial peptides' action to areas of specific pH in the body. The presented findings contribute to the fundamental understanding of lipid-peptide self-assembly and may open up a promising strategy for designing simple pH-responsive delivery systems for antimicrobial peptides.

Antimicrobial synergy of monolaurin lipid nanocapsules with adsorbed antimicrobial peptides against Staphylococcus aureus biofilms in vitro is absent in vivo

Bacterial infections are mostly due to bacteria in their biofilm-mode of growth, while penetrability of antimicrobials into infectious biofilms and increasing antibiotic resistance hamper infection treatment. In-vitro, monolaurin lipid nanocapsules (ML-LNCs) carrying adsorbed antimicrobial peptides (AMPs) displayed synergistic efficacy against planktonic Staphylococcus aureus, but it has not been demonstrated, neither in-vitro nor in-vivo, that such ML-LNCs penetrate into infectious S. aureus biofilms and maintain synergy with AMPs. This study investigates the release mechanism of AMPs from ML-LNCs and possible antimicrobial synergy of ML-LNCs with the AMPs DPK-060 and LL-37 against S. aureus biofilms in-vitro and in a therapeutic, murine, infected wound-healing model. Zeta potentials demonstrated that AMP release from ML-LNCs was controlled by the AMP concentration in suspension. Both AMPs demonstrated no antimicrobial efficacy against four staphylococcal strains in a planktonic mode, while a checkerboard assay showed synergistic antimicrobial efficacy when ML-LNCs and DPK-060 were combined, but not for combinations of ML-LNCs and LL-37. Similar effects were seen for growth reduction of staphylococcal biofilms, with antimicrobial synergy persisting only for ML-LNCs at the highest level of DPK-060 or LL-37 adsorption. Healing of wounds infected with bioluminescent S. aureus Xen36, treated with ML-LNCs alone, was faster when treated with PBS, while AMPs alone did not yield faster wound-healing than PBS. Faster, synergistic wound-healing due to ML-LNCs with adsorbed DPK-060, was absent in-vivo. Summarizing, antimicrobial synergy of ML-LNCs with adsorbed antimicrobial peptides as seen in-vitro, is absent in in-vivo healing of infected wounds, likely because host AMPs adapted the synergistic role of the AMPs added. Thus, conclusions regarding synergistic antimicrobial efficacy, should not be drawn from planktonic data, while even in-vitro biofilm data bear little relevance for the in-vivo situation.

Antimicrobial magnetic nanoparticles based-therapies for controlling infectious diseases

In the last years, the antimicrobial resistance against antibiotics has become a serious health issue, arise as global threat. This has generated a search for new strategies in the progress of new antimicrobial therapies. In this context, different nanosystems with antimicrobial properties have been studied. Specifically, magnetic nanoparticles seem to be very attractive due to their relatively simple synthesis, intrinsic antimicrobial activity, low toxicity and high versatility. Iron oxide NPs (IONPs) was authorized by the World Health Organization for human used in biomedical applications such as in vivo drug delivery systems, magnetic guided therapy and contrast agent for magnetic resonance imaging have been widely documented. Furthermore, the antimicrobial activity of different magnetic nanoparticles has recently been demonstrated. This review elucidates the recent progress of IONPs in drug delivery systems and focuses on the treatment of infectious diseases and target the possible detrimental biological effects and associated safety issues.

Cubosomes for topical delivery of the antimicrobial peptide LL-37

In this study, the use of cubosomes for topical delivery of the antimicrobial peptide (AMP) LL-37 was investigated. Topical delivery of AMPs is of great interest for treatment of skin infections caused by bacteria, such as Staphylococcus aureus. AMP containing cubosomes were produced by three different preparation protocols and compared: (i) pre-loading, where LL-37 was incorporated into a liquid crystalline gel, which thereafter was dispersed into nanoparticles, (ii) post-loading, where LL-37 was let to adsorb onto pre-formed cubosomes, and (iii) hydrotrope-loading, where LL-37 was incorporated during the spontaneously formed cubosomes in an ethanol/glycerol monooleate mixture. Particle size and size distribution were analyzed using dynamic light scattering (DLS), liquid crystalline structure by small angle x-ray scattering (SAXS) and release of LL-37 by a fluorescamine assay. Proteolytic protection of LL-37 as well as bactericidal effect after enzyme exposure was investigated. The skin irritation potential of cubosomes was examined by an in vitro epidermis model. Finally, the bacterial killing property of the cubosomes was examined by an ex vivo pig skin wound infection model with Staphylococcus aureus. Data showed that a high loading of LL-37 induced formation of vesicles in case of cubosomes prepared by sonication (pre-loading). No release of LL-37 was observed from the cubosomes, indicating strong association of the peptide to the particles. Proteolysis studies showed that LL-37 was fully protected against enzymatic attacks while associated with the cubosomes, also denoting strong association of the peptide to the particles. As a consequence, bactericidal effect after enzyme exposure remained, compared to pure LL-37 which was subjected to proteolysis. No skin irritation potential of the cubosomes was found, thus enabling for topical administration. The ex vivo wound infection model showed that LL-37 in pre-loaded cubosomes killed bacteria most efficient.

Antimicrobial peptides from different plant sources: Isolation, characterisation, and purification

Antimicrobial peptides (AMPs), the self-defence products of organisms, are extensively distributed in plants. They can be classified into several groups, including thionins, defensins, snakins, lipid transfer proteins, glycine-rich proteins, cyclotides and hevein-type proteins. AMPs can be extracted and isolated from different plants and plant organs such as stems, roots, seeds, flowers and leaves. They perform various physiological defensive mechanisms to eliminate viruses, bacteria, fungi and parasites, and so could be used as therapeutic and preservative agents. Research on AMPs has sought to obtain more detailed and reliable information regarding the selection of suitable plant sources and the use of appropriate isolation and purification techniques, as well as examining the mode of action of these peptides. Well-established AMP purification techniques currently used include salt precipitation methods, absorption-desorption, a combination of ion-exchange and reversed-phase C18 solid phase extraction, reversed-phase high-performance liquid chromatography (RP-HPLC), and the sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) method. Beyond these traditional methods, this review aims to highlight new and different approaches to the selection, characterisation, isolation, purification, mode of action and bioactivity assessment of a range of AMPs collected from plant sources. The information gathered will be helpful in the search for novel AMPs distributed in the plant kingdom, as well as providing future directions for the further investigation of AMPs for possible use on humans.

Lectins as antimicrobial agents

The resistance of micro-organisms to antimicrobial agents has been a challenge to treat animal and human infections, and for environmental control. Lectins are natural proteins and some are potent antimicrobials through binding to carbohydrates on microbial surfaces. Oligomerization state of lectins can influence their biological activity and maximum binding capacity; the association among lectin polypeptide chains can alter the carbohydrate-lectin binding dissociation rate constants. Antimicrobial mechanisms of lectins include the pore formation ability, followed by changes in the cell permeability and latter, indicates interactions with the bacterial cell wall components. In addition, the antifungal activity of lectins is associated with the chitin-binding property, resulting in the disintegration of the cell wall or the arrest of de novo synthesis from the cell wall during fungal development or division. Quorum sensing is a cell-to-cell communication process that allows interspecies and interkingdom signalling which coordinate virulence genes; antiquorum-sensing therapies are described for animal and plant lectins. This review article, among other approaches, evaluates lectins as antimicrobials.

Graphene Oxide-Assisted Accumulation and Layer-by-Layer Assembly of Antibacterial Peptide for Sustained Release Applications

Fabrication of antibacterial materials with sustained release of active components is of great importance for long-term antibacterial applications. Graphene oxide (GO) has been found to be an excellent carrier for accumulating the antibacterial peptide of G(IIKK)₄I-NH₂ and mediating its loading into the layer-by-layer (LBL) films for sustained release applications. G(IIKK)₄I-NH₂ takes random coiled conformation in monomeric state below 0.17 mM but self-assembles into supramolecular aggregates with α-helical secondary structure at higher concentrations. It can bind onto GO surface in both monomeric and aggregate states to form stable GO@G(IIKK)₄I-NH₂ composites. Upon binding, the local amphiphilic environment of GO surface induces a conformational transition of G(IIKK)₄I-NH₂ monomers from random coils to α-helix. The aggregate binding enhances the loading amount greatly. GO (1 mg) can load as high as 1.7 mg of peptide at saturation. This enables the GO@G(IIKK)₄I-NH₂ composites to serve as reservoirs for sustained release of active G(IIKK)₄I-NH₂ monomers. Moreover, G(IIKK)₄I-NH₂ itself shows low efficiency in LBL assembly, whereas the GO@G(IIKK)₄I-NH₂ composites are ideal LBL assembling units with highly enhanced loading efficiency of G(IIKK)₄I-NH₂. The LBL films involving degradable poly(β-amino esters) can realize sustained release of G(IIKK)₄I-NH₂ for bacteria killing in a well-controlled manner. This study demonstrates an efficient strategy for fabrication of long-durable antibacterial materials and surface coatings by using GO as the carrier for drug accumulation and loading.

Bioinspired Designs, Molecular Premise and Tools for Evaluating the Ecological Importance of Antimicrobial Peptides

This review article provides an overview of recent developments in antimicrobial peptides (AMPs), summarizing structural diversity, potential new applications, activity targets and microbial killing responses in general. The use of artificial and natural AMPs as templates for rational design of peptidomimetics are also discussed and some strategies are put forward to curtail cytotoxic effects against eukaryotic cells. Considering the heat-resistant nature, chemical and proteolytic stability of AMPs, we attempt to summarize their molecular targets, examine how these macromolecules may contribute to potential environmental risks vis-à-vis the activities of the peptides. We further point out the evolutional characteristics of the macromolecules and indicate how they can be useful in designing target-specific peptides. Methods are suggested that may help to assess toxic mechanisms of AMPs and possible solutions are discussed to promote the development and application of AMPs in medicine. Even if there is wide exposure to the environment like in the hospital settings, AMPs may instead contribute to prevent healthcare-associated infections so long as ecotoxicological aspects are considered.

Nanoscience-Based Strategies to Engineer Antimicrobial Surfaces

Microbial contamination and biofilm formation of medical devices is a major issue associated with medical complications and increased costs. Consequently, there is a growing need for novel strategies and exploitation of nanoscience-based technologies to reduce the interaction of bacteria and microbes with synthetic surfaces. This article focuses on surfaces that are nanostructured, have functional coatings, and generate or release antimicrobial compounds, including "smart surfaces" producing antibiotics on demand. Key requirements for successful antimicrobial surfaces including biocompatibility, mechanical stability, durability, and efficiency are discussed and illustrated with examples of the recent literature. Various nanoscience-based technologies are described along with new concepts, their advantages, and remaining open questions. Although at an early stage of research, nanoscience-based strategies for creating antimicrobial surfaces have the advantage of acting at the molecular level, potentially making them more efficient under specific conditions. Moreover, the interface can be fine tuned and specific interactions that depend on the location of the device can be addressed. Finally, remaining important challenges are identified: improvement of the efficacy for long-term use, extension of the application range to a large spectrum of bacteria, standardized evaluation assays, and combination of passive and active approaches in a single surface to produce multifunctional surfaces.

Antimicrobial Metallopeptides

Antimicrobial peptides are short amphipathic peptides that are produced by the innate immune system in order to protect a host from pathogens. They have been shown to have broad-spectrum antimicrobial activity toward Gram-positive and Gram-negative bacteria, as well as antifungal, antiprotozoan, and antiviral activity. These peptides are able to exert their activity through a variety of mechanisms that include inhibiting DNA and RNA replication, inhibiting protein synthesis, permeabilizing the cell membrane, disrupting proton and ion transmembrane gradients, and inhibiting cell wall biosynthesis. Certain antimicrobial peptides are able to utilize metals to modulate their activity through structural changes upon metal binding, metal sequestration, and redox chemistry. This work aims to provide a review of the current literature regarding the influence of metals on the activity of antimicrobial metallopeptides and their uses in drug delivery and the treatment of implant-associated infections.

Antimicrobial Peptides: Diversity, Mechanism of Action and Strategies to Improve the Activity and Biocompatibility In Vivo

Antibiotic resistance is projected as one of the greatest threats to human health in the future and hence alternatives are being explored to combat resistance. Antimicrobial peptides (AMPs) have shown great promise, because use of AMPs leads bacteria to develop no or low resistance. In this review, we discuss the diversity, history and the various mechanisms of action of AMPs. Although many AMPs have reached clinical trials, to date not many have been approved by the US Food and Drug Administration (FDA) due to issues with toxicity, protease cleavage and short half-life. Some of the recent strategies developed to improve the activity and biocompatibility of AMPs, such as chemical modifications and the use of delivery systems, are also reviewed in this article.

The Development of Peptide-based Antimicrobial Agents against Dengue Virus

Dengue fever has become an imminent threat to international public health because of global warming and climate change. The World Health Organization proclaimed that more than 50% of the world's population is at risk of dengue virus (DENV) infection. Therefore, developing a clinically approved vaccine and effective therapeutic remedy for treating dengue fever is imperative. Peptide drug development has become a novel pharmaceutical research field. This article reviews various peptidesbased antimicrobial agents targeting three pathways involved in the DENV lifecycle. Specifically, they are peptide vaccines from immunomodulation, peptide drugs that inhibit virus entry, and peptide drugs that interfere with viral replication. Many antiviral peptide studies against DENV have been conducted in animal model trials, and progression to clinical trials for these promising peptide drugs is anticipated.

Conformational Aspects of High Content Packing of Antimicrobial Peptides in Polymer Microgels

Successful use of microgels as delivery systems of antimicrobial peptides (AMPs) requires control of factors determining peptide loading and release to/from the microgels as well as of membrane interactions of both microgel particles and released peptides. Addressing these, we here investigate effects of microgel charge density and conformationally induced peptide amphiphilicity on AMP loading and release using detailed nuclear magnetic resonance (NMR) structural studies combined with ellipsometry, isothermal titration calorimetry, circular dichroism, and light scattering. In parallel, consequences of peptide loading and release for membrane interactions and antimicrobial effects were investigated. In doing so, poly(ethyl acrylate-co-methacrylic acid) microgels were found to incorporate the cationic AMPs EFK17a (EFKRIVQRIKDFLRNLV) and its partially d-amino acid-substituted variant EFK17da (E(dF)KR(dI)VQR(dI)KD(dF)LRNLV). Peptide incorporation was found to increase with increasing with microgel charge density and peptide amphiphilicity. After microgel incorporation, which appeared to occur preferentially in the microgel core, NMR showed EFK17a to form a helix with pronounced amphiphilicity, while EFK17da displayed a folded conformation, stabilized by a hydrophobic hub consisting of aromatic/aromatic and aliphatic/aromatic interactions, resulting in much lower amphiphilicity. Under wide ranges of peptide loading, the microgels displayed net negative z-potential. Such negatively charged microgels do not bind to, nor lyse, bacteria-mimicking membranes. Instead, membrane disruption in these systems is mediated largely by peptide release, which in turn is promoted at higher ionic strength and lower peptide amphiphilicity. Analogously, antimicrobial effects against Escherichia coli were found to be dictated by peptide release. Taken together, the findings show that peptide loading, packing, and release strongly affect the performance of microgels as AMP delivery systems, effects that can be tuned by (conformationally induced) peptide amphiphilicity and by microgel charge density.

Host Antimicrobial Peptides: The Promise of New Treatment Strategies against Tuberculosis

Tuberculosis (TB) continues to be a devastating infectious disease and remerges as a global health emergency due to an alarming rise of antimicrobial resistance to its treatment. Despite of the serious effort that has been applied to develop effective antitubercular chemotherapies, the potential of antimicrobial peptides (AMPs) remains underexploited. A large amount of literature is now accessible on the AMP mechanisms of action against a diversity of pathogens; nevertheless, research on their activity on mycobacteria is still scarce. In particular, there is an urgent need to integrate all available interdisciplinary strategies to eradicate extensively drug-resistant Mycobacterium tuberculosis strains. In this context, we should not underestimate our endogenous antimicrobial proteins and peptides as ancient players of the human host defense system. We are confident that novel antibiotics based on human AMPs displaying a rapid and multifaceted mechanism, with reduced toxicity, should significantly contribute to reverse the tide of antimycobacterial drug resistance. In this review, we have provided an up to date perspective of the current research on AMPs to be applied in the fight against TB. A better understanding on the mechanisms of action of human endogenous peptides should ensure the basis for the best guided design of novel antitubercular chemotherapeutics.

Antimicrobial peptide-loaded gold nanoparticle-DNA aptamer conjugates as highly effective antibacterial therapeutics against Vibrio vulnificus

Vibrio vulnificus causes fatal infections in humans, and antibiotics are commonly used in treatment regimens against V. vulnificus infection. However, the therapeutic effects of antibiotics are limited by multidrug resistance. In this study, we demonstrated that an antimicrobial peptide (AMP), HPA3P^His, loaded onto a gold nanoparticle-DNA aptamer (AuNP-Apt) conjugate (AuNP-Apt-HPA3P^His) is an effective therapeutic tool against V. vulnificus infection in vivo in mice. HPA3P^His induced bacterial cell death through the disruption of membrane integrity of V. vulnificus. The introduction of AuNP-Apt-HPA3P^His into V. vulnificus-infected HeLa cells dramatically reduced intracellular V. vulnificus by 90%, leading to an increase in the viability of the infected cells. Moreover, when V. vulnificus-infected mice were intravenously injected with AuNP-Apt-HPA3P^His, a complete inhibition of V. vulnificus colonization was observed in the mouse organs, leading to a 100% survival rate among the treated mice, whereas all the control mice died within 40 hours of being infected. Therefore, this study demonstrated the potential of an AMP delivered by AuNP-Apt as an effective and rapid treatment option against infection caused by a major pathogen in humans and aquatic animals.

Natural Antimicrobial Peptides as Inspiration for Design of a New Generation Antifungal Compounds

Invasive fungal infections are associated with high mortality rates, despite appropriate antifungal therapy. Limited therapeutic options, resistance development and the high mortality of invasive fungal infections brought about more concern triggering the search for new compounds capable of interfering with fungal viability and virulence. In this context, peptides gained attention as promising candidates for the antimycotics development. Variety of structural and functional characteristics identified for various natural antifungal peptides makes them excellent starting points for design novel drug candidates. Current review provides a brief overview of natural and synthetic antifungal peptides.

Inclusion of oligonucleotide antimicrobials in biocompatible cationic liposomes: A structural study

HYPOTHESIS

Transcription factor decoys (TFD) are short oligonucleotides designed to block essential genetic pathways in bacteria and defeat resistant infections. TFD protection in biological fluids and their delivery to the site of infection require formulation in appropriate delivery systems. In this work, we build on a classical phosphatidylcholine/phosphatidylethanolamine (POPC/DOPE) scaffold to design TFD-loaded cationic liposomes by combining the DNA-complexing abilities of a bolaamphiphile, (1,1'-(dodecane-1,12-diyl)-bis-(9-amino-1,2,3,4-tetrahydroacridinium) chloride (12-bis-THA), with the biocompatible cationic lipid ethyl-phosphatidylcholine (DPePC). The goal is to perform a structural study to determine the impact of the bolaamphiphile and TFD incorporation on the liposome structure, the capacity for TFD encapsulation, and the colloidal stability in saline media and cell culture environments.

EXPERIMENTS

The systems are characterized by means of dynamic light scattering, small-angle X-ray scattering, and ζ-potential measurements, to provide a clear picture of the liposome structure. Circular dichroism (CD) spectroscopy is used to assess the compaction of the oligonucleotide in a psi form, while steady-state fluorescence and fluorescence correlation spectroscopies give insight into the entrapment rate and distribution of the TFD in the liposomes.

FINDINGS

We found that the combination of the two cationic species, 12-bis-THA and DPePC, allows encapsulation of 90% of the TFD. Results of CD experiments revealed that the TFD is condensed, therefore likely protected from the lytic action of serum nucleases. Finally, the systems showed colloidal stability in aqueous dispersion with ionic strength comparable to biologically relevant media.