Microwave heating extraction of pectin from lime peel: Characterization and properties compared with the conventional heating method

Optimization of extraction with salicylic acid, rheological behavior and antiproliferative activity of pectin from Citrus sinensis peels

A Box-Behnken design was used to optimize extraction temperature, extraction time and concentration of the salicylic acid to obtain a maximum polysaccharide yield from Citrus sinensis peels. The optimal settings were: extraction time 3 h, extraction temperature 80 °C and concentration of the salicylic acid 1.5%. Under these conditions, the experimental yield and uronic acid content were 11.74% and 66.9% respectively. Preliminary characterization was performed via FT-IR, SEC/MALS/VD/DRI and GC-MS after hydrolysis. SEC analysis showed that the extracted polysaccharide had a weight average molar mass of 350 kDa and an intrinsic viscosity of 640 mL/g. The GC-MS results revealed that the extracted polysaccharide was composed of arabinose 56.7%, galactose 17.8%, xylose 13.8%, rhamnose 5.1%, mannose 2.5% and glucose 1.5% suggested a rhamnogalacturonan pectin type I with a degree of esterification of 50.9% (IRTF). The flow curve and the dynamic frequency sweep were obtained at 10, 20, 30 and 40 g/L in water and at 30 g/L in presence of CaCl₂ or NaCl at 1 mol/L. The solutions showed shear-thinning behavior fitted with Ostwald-De Waele model, except 10 g/L with a Newtonian behavior. The apparent viscosity and, the G' and G" moduli increase with PACO concentration in agreement with a slow-down of the dynamic chain. In the presence of CaCl₂ or NaCl the reduction of electrostatic repulsions between pectin chains decreases the rheological parameters. The effect is less sensitive with CaCl₂ due to intermolecular interactions. The antiproliferative activity of the extracted pectin on human Caco-2 and Hep-2 cells was very interesting with an IC₅₀ 1.4 and 1.8 μg/mL respectively.

Ultrasonic and microwave treatment improved jujube juice yield

The methods to leaching juice from dried jujube using six treatments and some factors related with juice yield such as total soluble solids (TSS), pectinase activity, pectin contents, galacturonic acid, and the microstructure morphology of cell were investigated. Six treatments including natural leaching, ultrasonic, microwave, ultrasonic before microwave, ultrasonic after microwave, and pressing directly were applied to extract juice. The group which treating with ultrasonic before microwave displayed its total soluble solids (TSS) was 16 °Brix, which was 6.67% higher than that of natural leaching. And its total soluble solids (TSS) reached to equilibrium in 2 hr, which was faster than that of natural leaching. The mechanism of improving the production efficiency of juice yield using ultrasonic combined with microwave was explored accordingly. The content of pectin and galacturonic acid increased by 58.52% and 59.01%, respectively, which were the highest among all samples. The activity of pectinase was 9.71 μg/(h·g), which was significantly decreased 40.23% as compared to natural leaching. And the treated cells became shriveled and pitted, which led to the leakage of the contents of cell. Thus, the result showed that treating with ultrasonic before microwave displayed the best juice yield. Ultrasonic cooperate with microwave was an efficient method to leaching juice from dried jujube.

Microwave and ultrasound assisted extraction of pectin from various fruits peel

Pectin, found in the cell walls of fruits and vegetables, is a complex colloidal polysaccharide. In this study, pectin was extracted using ultrasound and microwave-assisted extraction methods from waste lemon, mandarin, and kiwi peel to investigate their use as alternative source of pectin. Hydrochloric acid (HCl) and nitric acid (HNO₃) were used as the extracting agents. The effects of microwave power (360-600 W) and irradiation time (1, 2, 3 min) for microwave-assisted extraction (MAE) and of temperature (60 and 75 °C) and sonication time (15, 30, 45 min) on ultrasound-assisted extraction (UAE) on the yield of extracted pectin from the peels were investigated. Optimum conditions were determined for the extraction of pectin from all of the peel samples with the two extraction methods. The produced pectin yield and the degree of esterification were determined and, FT-IR and SEM analyses were performed. Kiwi peel gave the highest yield of extracted pectin using HCl as the solvent with 17.30% yield via UAE at 75 °C for 45 min and 17.97% yield via MAE at 360 W for, 3 min. It was concluded that lemon, mandarin, and kiwi peels all contained pectin and that MAE gave a better yield than UAE and could thus be used as an efficient and rapid technique for the extraction of pectin from the peels. The chemical structures of the pectin obtained using the two different extraction methods were similar and showed a high degree of methoxylation.

Mango Peel Pectin by Microwave-Assisted Extraction and its Use as Fat Replacement in Dried Chinese Sausage

In this research, low-fat dried Chinese sausage was formulated with mango peel pectin (MPP; 0%, 5%, 10%, and 15% (w/w)) extracted by microwave assisted extraction (MAE). The extractable yield of pectin attained from peel of Nam Dok Mai variety was achieved at 13.85% using 700-watt power. The extracted MPP were of high equivalent weight (1485.78 mg/mol), degree esterification (77.19%) and methoxyl content (19.33%) with a structure of greater porosity as compared to that of the conventional method. Spectrum scans by Fourier transform infrared spectrophotometer (FT-IR) indicated that the extracted MPP gave similar wave number profiles as the commercial pectin. Quality attributes of the Chinese sausages were assessed and compared with the control formula (CTRL). At higher concentrations of MPP, the intensity of redness and yellowness in sausage increased. The texture profile of the sausage illustrated that only the hardness value was comparable with the CTRL, while springiness, cohesiveness, gumminess and chewiness were statistically lower (p < 0.05). Furthermore, the sensory evaluation by experienced panellists (n = 12) indicated that 5% MPP similarly represented overall acceptability with the CTRL. Consequently, MPP can be effectively incorporated in the formula at low level to replace fat in Chinese sausage, allowing colour improvement and production of a healthier option.

Recent Trends in the Use of Pectin from Agro-Waste Residues as a Natural-Based Biopolymer for Food Packaging Applications

Regardless of the considerable progress in properties and versatility of synthetic polymers, their low biodegradability and lack of environmentally-friendly character remains a critical issue. Pectin is a natural-based polysaccharide contained in the cell walls of many plants allowing their growth and cell extension. This biopolymer can be extracted from plants and isolated as a bioplastic material with different applications, including food packaging. This review aims to present the latest research results regarding pectin, including the structure, different types, natural sources and potential use in several sectors, particularly in food packaging materials. Many researchers are currently working on a multitude of food and beverage industry applications related to pectin as well as combinations with other biopolymers to improve some key properties, such as antioxidant/antimicrobial performance and flexibility to obtain films. All these advances are covered in this review.

Effects of acoustic power and pH on pectin-enriched extracts obtained from citrus by-products. Modelling of the extraction process

BACKGROUND

The ultrasound-assisted extraction of pectic polysaccharides from orange by-products was investigated. Kinetics of mechanical agitation (0.2 × g) and acoustic (US1: 542 W L^-1 and US2: 794 W L^-1 ) extractions, were obtained and modelled at different pH values (1.5 and 2.0). All extractions were carried out at 25 °C, using citric acid as the extraction solvent.

RESULTS

Higher pectic polysaccharides extraction yields were obtained with ultrasonic assistance, in comparison with the results obtained using mechanical agitation. Moreover, yield increases were significantly higher using the more acidic pH. Thus, at pH 1.5, pectin yield increased from ∼19%, obtained with agitation, to ∼47%, applying ultrasound; whereas, at pH 2.0, this increase was from ∼10%, with agitation, to ∼18%, applying ultrasound. A considerable decrease of the galacturonic acid proportion was observed on the extracts when ultrasound were applied for 60 min under pH 2.0. High methoxyl pectins were extracted at pH 1.5 whereas at pH 2.0, pectins exhibited a low methylation degree. Curves of acoustic and mechanical agitation extractions were properly represented by a second-order rate model (average mean relative error ≤ 7.4%). The extraction rate constant, initial extraction rate and maximum yield were determined for all experimental conditions.

CONCLUSION

Overall, the results clearly indicated that the effect of ultrasound was highly dependent on the pH. Therefore, adequate acidic conditions must be applied in order to improve the efficiency of ultrasound on the pectin extraction process. © 2019 Society of Chemical Industry.

Recovery of Natural Antioxidants from Agro-Industrial Side Streams through Advanced Extraction Techniques

Large amounts of agro-industrial waste are being generated each year, leading to pollution and economic loss. At the same time, these side streams are rich source of active compounds including antioxidants. Recovered compounds can be re-utilized as food additives, functional foods, nutra-/pharmaceuticals, cosmeceuticals, beauty products, and bio-packaging. Advanced extraction techniques are promising tools to recover target compounds such as antioxidants from agro-industrial side streams. Due to the disadvantages of classical extraction techniques (such as large amounts of solvents, increased time of extraction, large amounts of remaining waste after the extraction procedure, etc.), and advanced techniques emerged, in order to obtain more efficient and sustainable processes. In this review paper aspects regarding different modern extraction techniques related to recovery of antioxidant compounds from wastes generated in different industries and their applications are briefly discussed.

Ultrasound-Assisted Extraction of Pectin from Malus domestica ‘Fălticeni’ Apple Pomace

The use of an ultrasonic treatment for the extraction of pectin from Malus domestica ‘Fălticeni’ apple pomace, its effects on extraction yield and galacturonic acid content, and degree of esterification of the extracted pectin were investigated. The optimization of the extraction process showed that the highest yield of 9.183% pectin, with a 98.127 g/100 g galacturonic acid content and 83.202% degree of esterification, was obtained at 100% amplitude, pH of 1.8, SLR of 1:10 g/mL, and 30 min. The pectin obtained in optimal extraction conditions was compared to commercial citrus and apple pectin in terms of chemical composition (determined by FT-IR), thermal behaviour (analyzed by differential scanning calorimetry), rheological properties, and morphological structure (analyzed by scanning electron microscopy). By comparison to commercial citrus and apple pectin samples, the FT-IR analysis of pectin extracted by ultrasound treatment confirmed the high degree of esterification and showed similarity to that of apple pectin (88.526%). It was found that the thermal behaviour of the pectin obtained by ultrasound-assisted extraction was influenced by the narrower distribution of molecular weights and the orderly molecular arrangement, while the rheological properties (high viscosity, G0, and G1) of this sample were influenced by the morphological structure and the galacturonic acid content. The correlation coefficient showed a strong positive relationship between viscosity and galacturonic acid content (r = 0.992**).

Structural characterisation of pectin obtained from cacao pod husk. Comparison of conventional and subcritical water extraction

Pectin was obtained with citric acid and subcritical water extraction from cacao pod husk with or without a previous step consisting of a supercritical fluid extraction of phenols. By subcritical conditions a higher yield (10.9%) was attained in a time 3-fold shorter than that obtained by conventional extraction (˜8%) and a greater effectiveness in the recovery of pectin with higher molecular weight (750 kDa) was also found. Regarding pectin structure, galacturonic acid and degree of methyl esterification content were similar (˜55 and ˜36%, respectively) in both methods. Moreover, pectin recovered by citric acid presented 2-fold higher amount of impurities as compared to subcritical water extraction. Hardly any effects of a previous supercritical treatment were observed in the structure and composition of pectin, indicating the efficiency of the integrated supercritical carbon dioxide and subcritical water extraction as green processes for the obtainment of phenol and pectin from cacao pod husk.