101
|
Fazleeva RR, Nasretdinova GR, Osin YN, Samigullina AI, Gubaidullin AT, Yanilkin VV. An Effective Producing Method of Nanocomposites of Ag, Au, and Pd Nanoparticles with Poly(N-vinylpyrrolidone) and Nanocellulose. Electrocatalysis (N Y) 2021. [DOI: 10.1007/s12678-021-00645-y] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
|
102
|
Ahmad H. Celluloses as Green Support of Palladium Nanoparticles for Application in Heterogeneous Catalysis: A Brief Review. J CLUST SCI 2021. [DOI: 10.1007/s10876-021-02000-z] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
103
|
Influence of hydrogen sulfide gas concentrations on LOD and LOQ of thermal spray coated hybrid-bacterial cellulose film for intelligent meat label. Carbohydr Polym 2021; 254:117442. [DOI: 10.1016/j.carbpol.2020.117442] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/17/2020] [Revised: 11/20/2020] [Accepted: 11/20/2020] [Indexed: 12/29/2022]
|
104
|
Colloidal stability of cellulose nanocrystals in aqueous solutions containing monovalent, divalent, and trivalent inorganic salts. J Colloid Interface Sci 2021; 584:456-463. [DOI: 10.1016/j.jcis.2020.09.117] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/26/2020] [Revised: 09/27/2020] [Accepted: 09/28/2020] [Indexed: 02/06/2023]
|
105
|
Zhu X, Chen J, Hu Y, Zhang N, Fu Y, Chen X. Tuning complexation of carboxymethyl cellulose/ cationic chitosan to stabilize Pickering emulsion for curcumin encapsulation. Food Hydrocoll 2021. [DOI: 10.1016/j.foodhyd.2020.106135] [Citation(s) in RCA: 35] [Impact Index Per Article: 11.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
|
106
|
Co(III)-Salen immobilized cellulose nanocrystals for efficient catalytic CO 2 fixation into cyclic carbonates under mild conditions. Carbohydr Polym 2020; 256:117558. [PMID: 33483060 DOI: 10.1016/j.carbpol.2020.117558] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/10/2020] [Revised: 12/16/2020] [Accepted: 12/18/2020] [Indexed: 12/25/2022]
Abstract
Searching for green, recyclable and highly efficient catalyst for the synthesis of cyclic carbonates from CO2 is of great importance because it is profitable for reducing the greenhouse effects and meets the principles of green chemistry. Herein, a series of cellulose nanocrystals, either the pristine or modified ones (TEMPO oxidized and Co(III)salen immobilized), were explored as catalysts for cycloaddition of epoxides and carbon dioxide. The impact of surface properties on the performance of the as-made catalysts was investigated. Co(III)-salen grafted cellulose nanocrystals was proven to be the most effective catalyst in this study, which could afford excellent yield up to 99 % after 24 h even under low CO2 pressures of 0.1 MPa. They can be easily recovered and reused for at least 4 times, demonstrating their excellent stability. We found that the surface functional groups such as enriched sulfate or carboxylic groups could also account for the enhanced catalytic activity. This work highlights the applications of green and sustainable nanoparticles in a cycloaddition reaction and offers a sustainable solution in industrial catalysis related to CO2 conversions.
Collapse
|
107
|
Leite LSF, Bilatto S, Paschoalin RT, Soares AC, Moreira FKV, Oliveira ON, Mattoso LHC, Bras J. Eco-friendly gelatin films with rosin-grafted cellulose nanocrystals for antimicrobial packaging. Int J Biol Macromol 2020; 165:2974-2983. [PMID: 33122067 DOI: 10.1016/j.ijbiomac.2020.10.189] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/04/2020] [Revised: 10/22/2020] [Accepted: 10/23/2020] [Indexed: 02/06/2023]
Abstract
We report on gelatin films incorporating rosin-grafted cellulose nanocrystals (r-CNCs), which fulfill the most relevant requirements for antimicrobial packaging applications. Transparent gelatin/r-CNCs bionanocomposite films (0.5-6 wt% r-CNCs) were obtained by solution casting and displayed high UV-barrier properties, which were superior to the most used plastic packaging films. The gelatin/r-CNCs films exhibited a moderate water vapor permeability (0.09 g mm/m2 h kPa), and high tensile strength (40 MPa) and Young's modulus (1.9 GPa). The r-CNCs were more efficient in improving the optical, water vapor barrier and tensile properties of gelatin films than conventional CNCs. Grafting of rosin on CNCs resulted in an antimicrobial nanocellulose that inhibited the growth of Staphylococcus aureus and Escherichia coli. The antibacterial properties of r-CNCs were sustained in the gelatin films, as demonstrated by agar diffusion tests and proof-of-principle experiments involving cheese storage. Overall, the incorporation of r-CNCs as active fillers in gelatin films is a suitable approach for producing novel eco-friendly, antimicrobial packaging materials.
Collapse
Affiliation(s)
- Liliane S F Leite
- Federal University of São Carlos, Graduate Program in Materials Science and Engineering (PPGCEM), 13565-905 São Carlos, Brazil; National Nanotechnology Laboratory for Agribusiness, Embrapa Instrumentação, XV de Novembro street, 1452, 13560-979 São Carlos, Brazil; University Grenoble Alpes, CNRS, Grenoble INP, LGP2, F-38400 Grenoble, France.
| | - Stanley Bilatto
- National Nanotechnology Laboratory for Agribusiness, Embrapa Instrumentação, XV de Novembro street, 1452, 13560-979 São Carlos, Brazil.
| | - Rafaella T Paschoalin
- University of São Paulo, São Carlos Institute of Physics, 13560-970 São Carlos, Brazil.
| | - Andrey C Soares
- National Nanotechnology Laboratory for Agribusiness, Embrapa Instrumentação, XV de Novembro street, 1452, 13560-979 São Carlos, Brazil.
| | - Francys K V Moreira
- Department of Materials Engineering, Federal University of São Carlos, Rod. Washington Luis, km 235, São Carlos, SP 13565-905, Brazil.
| | - Osvaldo N Oliveira
- University of São Paulo, São Carlos Institute of Physics, 13560-970 São Carlos, Brazil.
| | - Luiz H C Mattoso
- Federal University of São Carlos, Graduate Program in Materials Science and Engineering (PPGCEM), 13565-905 São Carlos, Brazil; National Nanotechnology Laboratory for Agribusiness, Embrapa Instrumentação, XV de Novembro street, 1452, 13560-979 São Carlos, Brazil.
| | - Julien Bras
- University Grenoble Alpes, CNRS, Grenoble INP, LGP2, F-38400 Grenoble, France; Nestle Research Center, 1000 Lausanne, Switzerland.
| |
Collapse
|
108
|
Koshani R, Tavakolian M, van de Ven TGM. Cellulose-based dispersants and flocculants. J Mater Chem B 2020; 8:10502-10526. [PMID: 33136107 DOI: 10.1039/d0tb02021d] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/10/2023]
Abstract
Natural dispersants and flocculants, often referred to as dispersion stabilizers and liquid-solid separators, respectively, have secured a promising role in the bioprocessing community. They have various applications, including in biomedicine and in environmental remediation. A large fraction of existing dispersants and flocculants are synthesized from non-safe chemical compounds such as polyacrylamide and surfactants. Despite numerous advantages of synthetic dispersants and flocculants, issues such as renewability, sustainability, biocompatibility, and cost efficiency have shifted attention towards natural homologues, in particular, cellulose-based ones. Within the past decade, cellulose derivatives, obtained via chemical and mechanical treatments of cellulose fibrils, have successfully been used for these purposes. In this review article, by dividing the functional cellulosic compounds into "polymeric" and "nanoscale" categories, we provide insight into the engineering pathways, the structural frameworks, and surface chemistry of these "green" types of dispersants and flocculants. A summary of their efficiency and the controlling parameters is also accompanied by recent advances in their applications in each section. We are confident that the emergence of cellulose-based dispersing and flocculating agents will extend the boundaries of sustainable green technology.
Collapse
Affiliation(s)
- Roya Koshani
- Department of Chemistry, McGill University, 801 Sherbrooke Street West, Montréal, QC H3A 0B8, Canada. and Quebec Centre for Advanced Materials (QCAM) and Pulp and Paper Research Center, McGill University, 3420 University Street, Montréal, QC H3A 2A7, Canada.
| | - Mandana Tavakolian
- Quebec Centre for Advanced Materials (QCAM) and Pulp and Paper Research Center, McGill University, 3420 University Street, Montréal, QC H3A 2A7, Canada. and Department of Chemical Engineering, McGill University, 3610 University Street, Montréal, QC H3A 0C5, Canada
| | - Theo G M van de Ven
- Department of Chemistry, McGill University, 801 Sherbrooke Street West, Montréal, QC H3A 0B8, Canada. and Quebec Centre for Advanced Materials (QCAM) and Pulp and Paper Research Center, McGill University, 3420 University Street, Montréal, QC H3A 2A7, Canada.
| |
Collapse
|
109
|
Chu Y, Sun Y, Wu W, Xiao H. Dispersion Properties of Nanocellulose: A Review. Carbohydr Polym 2020; 250:116892. [DOI: 10.1016/j.carbpol.2020.116892] [Citation(s) in RCA: 47] [Impact Index Per Article: 11.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/05/2020] [Revised: 07/20/2020] [Accepted: 08/01/2020] [Indexed: 12/28/2022]
|
110
|
Liu W, Wang M, Cao W. In Situ Tracing for the Crystalline Structure of a Polyacrylonitrile/Cellulose Nanocrystals Complex during Thermal Stabilization. Macromolecules 2020. [DOI: 10.1021/acs.macromol.0c01543] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/29/2023]
Affiliation(s)
- Wei Liu
- State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China
- The Key Laboratory of Education Ministry on Carbon Fiber and Functional Polymer, Beijing University of Chemical Technology, Beijing 100029, China
| | - Mengfan Wang
- Department of Future Industry-Oriented Basic Science and Materials, Toyota Technological Institute, Tempaku, Nagoya 461-8511, Japan
| | - Weiyu Cao
- State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China
- The Key Laboratory of Education Ministry on Carbon Fiber and Functional Polymer, Beijing University of Chemical Technology, Beijing 100029, China
| |
Collapse
|
111
|
Energy efficient process for valorization of corn cob as a source for nanocrystalline cellulose and hemicellulose production. Int J Biol Macromol 2020; 163:260-269. [DOI: 10.1016/j.ijbiomac.2020.06.276] [Citation(s) in RCA: 33] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/06/2020] [Revised: 06/28/2020] [Accepted: 06/29/2020] [Indexed: 11/17/2022]
|
112
|
Wang L, Zhang C, He H, Zhu H, Guo W, Zhou S, Wang S, Zhao JR, Zhang J. Cellulose-based colorimetric sensor with N, S sites for Ag+ detection. Int J Biol Macromol 2020; 163:593-602. [DOI: 10.1016/j.ijbiomac.2020.07.018] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/07/2020] [Revised: 04/28/2020] [Accepted: 07/02/2020] [Indexed: 12/25/2022]
|
113
|
Bruel C, Queffeulou S, Carreau PJ, Tavares JR, Heuzey MC. Orienting Cellulose Nanocrystal Functionalities Tunes the Wettability of Water-Cast Films. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2020; 36:12179-12189. [PMID: 32986430 DOI: 10.1021/acs.langmuir.0c01799] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Cellulose nanocrystal (CNC)-based materials display apparently erratic wetting behaviors with contact angle (CA) variations as large as 30° from sample to sample. This work hypothesizes that it is the orientation of CNC amphiphilic functionalities at the interface with air that causes the variability in CA. By exploiting relationships with the Hansen solubility parameter theory, a set of surface tension parameters is proposed for both the polar and the non-polar surfaces of cellulose Iβ nanocrystals. These coefficients elucidate the wettability of CNC materials by establishing a correlation between the wetting properties of the air/sample interface and its chemical composition in terms of non-polar moieties. Advancing/receding CA experiments suggest that, while spin-coating CNC suspensions yield purely polar films, oven-casting them produces amphiphilic surfaces. We proposed a mechanism where the state of dispersion (individual or agglomerated) in which CNCs reach the air/water interface during casting is the determining factor: while individual nanocrystals find it more stable to orient their non-polar surfaces toward the interface, the aspect ratio of CNC agglomerates favors an orientation of their polar surfaces. This represents the first compelling evidence of CNC orientation at an interface and can be applied to Pickering emulsions and nanocomposites and to the production of CNC materials with tuned wettability.
Collapse
Affiliation(s)
- Charles Bruel
- Research Center for High Performance Polymer and Composite Systems (CREPEC), Department of Chemical Engineering, Polytechnique Montréal, P.O. Box 6079, Stn Centre-Ville, Montreal, Quebec H3C 3A7, Canada
| | - Salomé Queffeulou
- Research Center for High Performance Polymer and Composite Systems (CREPEC), Department of Chemical Engineering, Polytechnique Montréal, P.O. Box 6079, Stn Centre-Ville, Montreal, Quebec H3C 3A7, Canada
| | - Pierre J Carreau
- Research Center for High Performance Polymer and Composite Systems (CREPEC), Department of Chemical Engineering, Polytechnique Montréal, P.O. Box 6079, Stn Centre-Ville, Montreal, Quebec H3C 3A7, Canada
| | - Jason R Tavares
- Research Center for High Performance Polymer and Composite Systems (CREPEC), Department of Chemical Engineering, Polytechnique Montréal, P.O. Box 6079, Stn Centre-Ville, Montreal, Quebec H3C 3A7, Canada
| | - Marie-Claude Heuzey
- Research Center for High Performance Polymer and Composite Systems (CREPEC), Department of Chemical Engineering, Polytechnique Montréal, P.O. Box 6079, Stn Centre-Ville, Montreal, Quebec H3C 3A7, Canada
| |
Collapse
|
114
|
Mapping the surface potential, charge density and adhesion of cellulose nanocrystals using advanced scanning probe microscopy. Carbohydr Polym 2020; 246:116393. [PMID: 32747225 DOI: 10.1016/j.carbpol.2020.116393] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/02/2019] [Revised: 04/26/2020] [Accepted: 04/29/2020] [Indexed: 01/23/2023]
Abstract
Cellulose nanocrystals (CNC) are the focus of significant attention in the broad area of sustainable technologies for possessing many desirable properties such as a large surface area, high strength and stiffness, outstanding colloidal stability, excellent biocompatibility and biodegradability, low weight and abundance in nature. Yet, a fundamental understanding of the micro- and nanoscale electrical charge distribution on nanocellulose still remains elusive. Here we present direct quantification and mapping of surface charges on CNCs at ambient condition using advanced surface probe microscopy techniques such as Kelvin probe force microscopy (KPFM), electrostatic force microscopy (EFM) and force-distance (F-D) curve measurements. We show by EFM measurements that the surface charge in the solid-state (as contrasted with liquid dispersions) present at ambient condition on CNCs provided by Innotech Alberta is intrinsically negative and the charge density is estimated to be 13 μC/cm2. These charges also result in CNCs having two times the adhesive force exhibited by SiO2 substrates in adhesion mapping studies. The origin of negative surface charge is likely due to the formation of CNCs through sulfuric acid hydrolysis where sulfate half esters groups remained on the surface (Johnston et al., 2018).
Collapse
|
115
|
|
116
|
Zhu Y, Chen T, Cui Z, Dai H, Cai L. Stimuli-Responsive Biomass Cellulose Particles Being Able to Reversibly Self-Assemble at Fluid Interface. Front Chem 2020; 8:712. [PMID: 33134247 PMCID: PMC7573168 DOI: 10.3389/fchem.2020.00712] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/25/2020] [Accepted: 07/09/2020] [Indexed: 11/13/2022] Open
Abstract
Stimuli-responsive surface-active microcrystalline cellulose (MCC) particles are obtained by interaction with conventional cationic surfactants such as cetyltrimethylammonium bromide (CTAB) in aqueous media, where MCC are in situ hydrophobized by adsorption of the cationic surfactant in water via electrostatic interaction and with the in situ hydrophobization removed by adding an equimolar amount of an anionic surfactant such as sodium dodecyl sulfate (SDS). The trigger is that the electrostatic interaction between the oppositely charged ionic surfactants is stronger than that between the cationic surfactant and the negative charges on particle surfaces, or the anionic surfactant prefers to form ion pairs with the cationic surfactants and thus making them desorbed from surface of MCC. Reversible O/W Pickering emulsions can then be obtained by using the MCC in combination with trace amount of a cationic surfactant and an anionic surfactant, and the anionic surfactant with a longer alkyl chain is more efficient for demulsification. With excellent biocompatibility, biodegradability, and renewability, as well as low toxicity, the biomass cellulose particles that can be made stimuli-responsive and able to reversibly self-assemble at fluid interface become ideal biocompatible particulate materials with extensive applications involving emulsions and foams.
Collapse
Affiliation(s)
- Yue Zhu
- School of Chemistry and Chemical Engineering, Nantong University, Nantong, China
| | - Tingting Chen
- School of Chemistry and Chemical Engineering, Nantong University, Nantong, China
| | - Zhenggang Cui
- The Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi, China
| | - Hong Dai
- School of Chemistry and Chemical Engineering, Nantong University, Nantong, China
| | - Li Cai
- School of Chemistry and Chemical Engineering, Nantong University, Nantong, China
| |
Collapse
|
117
|
Alam KM, Kumar P, Gusarov S, Kobryn AE, Kalra AP, Zeng S, Goswami A, Thundat T, Shankar K. Synthesis and Characterization of Zinc Phthalocyanine-Cellulose Nanocrystal (CNC) Conjugates: Toward Highly Functional CNCs. ACS APPLIED MATERIALS & INTERFACES 2020; 12:43992-44006. [PMID: 32530267 DOI: 10.1021/acsami.0c07179] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
We report highly fluorescent cellulose nanocrystals (CNCs) formed by conjugating a carboxylated zinc phthalocyanine (ZnPc) to two different types of CNCs. The conjugated nanocrystals (henceforth called ZnPc@CNCs) were bright green in color and exhibited absorption and emission maxima at ∼690 and ∼715 nm, respectively. The esterification protocol employed to covalently bind carboxylated ZnPc to surface hydroxyl group rich CNCs was expected to result in a monolayer of ZnPc on the surface of the CNCs. However, dynamic light scattering (DLS) studies indicated a large increase in the hydrodynamic radius of CNCs following conjugation to ZnPc, which suggests the binding of multiple ZnPc molecular layers on the CNC surface. This binding could be through co-facial π-stacking of ZnPc, where ZnPc metallophthalocyanine rings are horizontal to the CNC surface. The other possible binding mode would give rise to conjugated systems where ZnPc metallophthalocyanine rings are oriented vertically on the CNC surface. Density functional theory based calculations showed stable geometry following the conjugation protocol that involved covalently attached ester bond formation. The conjugates demonstrated superior performance for potential sensing applications through higher photoluminescence quenching capabilities compared to pristine ZnPc.
Collapse
Affiliation(s)
- Kazi M Alam
- Department of Electrical & Computer Engineering, University of Alberta, 9211-116 St., Edmonton, AB T6G 1H9, Canada
| | - Pawan Kumar
- Department of Electrical & Computer Engineering, University of Alberta, 9211-116 St., Edmonton, AB T6G 1H9, Canada
| | - Sergey Gusarov
- Nanotechnology Research Centre, National Research Council Canada, 11421 Saskatchewan Drive, Edmonton, AB T6G 2M9, Canada
| | - Alexander E Kobryn
- Nanotechnology Research Centre, National Research Council Canada, 11421 Saskatchewan Drive, Edmonton, AB T6G 2M9, Canada
| | - Aarat P Kalra
- Department of Electrical & Computer Engineering, University of Alberta, 9211-116 St., Edmonton, AB T6G 1H9, Canada
- Department of Physics, Faculty of Science, University of Alberta, Edmonton, T6G 1H9, Canada
| | - Sheng Zeng
- Department of Electrical & Computer Engineering, University of Alberta, 9211-116 St., Edmonton, AB T6G 1H9, Canada
| | - Ankur Goswami
- Department of Electrical & Computer Engineering, University of Alberta, 9211-116 St., Edmonton, AB T6G 1H9, Canada
- Department of Materials Science and Engineering, Indian Institute of Technology Delhi, New Delhi 11016, India
| | - Thomas Thundat
- Department of Chemical and Materials Engineering, University of Alberta, Edmonton, T6G 1H9, Canada
- Department of Chemical and Biological Engineering, University at Buffalo, The State University of New York, Buffalo, New York 14260, United States
| | - Karthik Shankar
- Department of Electrical & Computer Engineering, University of Alberta, 9211-116 St., Edmonton, AB T6G 1H9, Canada
| |
Collapse
|
118
|
Yanilkin VV, Fazleeva RR, Nasretdinova GR, Osin YN, Zhukova NA, Mamedov VA. Benzimidazo[1',2':1,2]Quinolino[4,3-b][1,2,5]Oxodiazolo[3,4-f]Quinoxaline—New Mediator for Electrosynthesizing Metal Nanoparticles. RUSS J ELECTROCHEM+ 2020. [DOI: 10.1134/s1023193520080066] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
119
|
Dupont H, Fouché C, Dourges MA, Schmitt V, Héroguez V. Polymerization of cellulose nanocrystals-based Pickering HIPE towards green porous materials. Carbohydr Polym 2020; 243:116411. [DOI: 10.1016/j.carbpol.2020.116411] [Citation(s) in RCA: 21] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/06/2020] [Revised: 05/04/2020] [Accepted: 05/05/2020] [Indexed: 01/16/2023]
|
120
|
Carbodiimide coupling versus click chemistry for nanoparticle surface functionalization: A comparative study for the encapsulation of sodium cholate by cellulose nanocrystals modified with β-cyclodextrin. Carbohydr Polym 2020; 244:116512. [DOI: 10.1016/j.carbpol.2020.116512] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/03/2020] [Revised: 05/06/2020] [Accepted: 05/23/2020] [Indexed: 11/15/2022]
|
121
|
Trache D, Thakur VK, Boukherroub R. Cellulose Nanocrystals/Graphene Hybrids-A Promising New Class of Materials for Advanced Applications. NANOMATERIALS (BASEL, SWITZERLAND) 2020; 10:E1523. [PMID: 32759691 PMCID: PMC7466521 DOI: 10.3390/nano10081523] [Citation(s) in RCA: 56] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/20/2020] [Revised: 07/28/2020] [Accepted: 07/31/2020] [Indexed: 02/07/2023]
Abstract
With the growth of global fossil-based resource consumption and the environmental concern, there is an urgent need to develop sustainable and environmentally friendly materials, which exhibit promising properties and could maintain an acceptable level of performance to substitute the petroleum-based ones. As elite nanomaterials, cellulose nanocrystals (CNC) derived from natural renewable resources, exhibit excellent physicochemical properties, biodegradability and biocompatibility and have attracted tremendous interest nowadays. Their combination with other nanomaterials such as graphene-based materials (GNM) has been revealed to be useful and generated new hybrid materials with fascinating physicochemical characteristics and performances. In this context, the review presented herein describes the quickly growing field of a new emerging generation of CNC/GNM hybrids, with a focus on strategies for their preparation and most relevant achievements. These hybrids showed great promise in a wide range of applications such as separation, energy storage, electronic, optic, biomedical, catalysis and food packaging. Some basic concepts and general background on the preparation of CNC and GNM as well as their key features are provided ahead.
Collapse
Affiliation(s)
- Djalal Trache
- Energetic Materials Laboratory, Teaching and Research Unit of Energetic Processes, Ecole Militaire Polytechnique, BP 17, Bordj El-Bahri, 16046 Algiers, Algeria
| | - Vijay Kumar Thakur
- Biorefining and Advanced Materials Research Center, Scotland’s Rural College (SRUC), Kings Buildings, Edinburgh EH9 3JG, UK;
- Department of Mechanical Engineering, School of Engineering, Shiv Nadar University, Greater Noida, Uttar Pradesh 201314, India
| | - Rabah Boukherroub
- Institut d’Electronique, de Microélectronique et de Nanotechnologie (IEMN-UMR CNRS 8520), University Lille, CNRS, Centrale Lille, University Polytechnique Hauts-de-France, UMR 8520—IEMN, F-59000 Lille, France;
| |
Collapse
|
122
|
Direct conversion of cellulose to 5-hydroxymethylfurfural over SnNb2O6–ZrO2 catalyst. REACTION KINETICS MECHANISMS AND CATALYSIS 2020. [DOI: 10.1007/s11144-020-01823-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
123
|
Azzam F, Frka-Petesic B, Semeraro EF, Cousin F, Jean B. Small-Angle Neutron Scattering Reveals the Structural Details of Thermosensitive Polymer-Grafted Cellulose Nanocrystal Suspensions. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2020; 36:8511-8519. [PMID: 32610020 DOI: 10.1021/acs.langmuir.0c01103] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Thanks to the use of small-angle neutron scattering (SANS), a detailed structural description of thermosensitive polymer-grafted cellulose nanocrystals (CNCs) was obtained and the behavior of aqueous suspensions of these derivatized biosourced particles upon temperature increase was revealed. Although literature data show that the surface grafting of thermosensitive polymers drastically enhances the colloidal properties of CNCs, direct space microscopic investigation techniques fail in providing sufficient structural information on these objects. In the case of CNCs decorated with temperature-sensitive polyetheramines following a peptide coupling reaction, a qualitative and quantitative analysis of SANS spectra shows that CNCs are homogeneously covered by a shell comprising polymer chains in a Gaussian conformation with a thickness equal to their radius of gyration in solution, thus revealing a mushroom regime. An increase of the temperature above the lower critical solution temperature (LCST) of the polyetheramine results in the formation of finite size bundles whose aggregation number depends on the particle concentration and suspension temperature deviation from the LCST. SANS analysis further reveals local changes at the CNC surface corresponding to a release of water molecules and a related denser polymer shell conformation. Noticeably, data show a full reversibility at all length scales when a sample was cooled down to below the LCST after being heated above it. Overall, the results obtained by SANS allow an in-depth structural investigation of derivatized CNCs, which is of high interest for the design of functional materials comprising these biosourced colloids.
Collapse
Affiliation(s)
- Firas Azzam
- Centre de Recherches sur les Macromolécules Végétales (CERMAV), Université Grenoble Alpes, F-38000 Grenoble, France
| | - Bruno Frka-Petesic
- Centre de Recherches sur les Macromolécules Végétales (CERMAV), Université Grenoble Alpes, F-38000 Grenoble, France
| | - Enrico F Semeraro
- Grenoble INP (Institute of Engineering Univ. Grenoble Alpes), CNRS, Université Grenoble Alpes, LRP, F-38000 Grenoble, France
| | - Fabrice Cousin
- Laboratoire Léon Brillouin, Université Paris-Saclay, Commissariat à l'Energie Atomique et aux Energies Alternatives (CEA) Saclay, F-91191 Gif-sur-Yvette, France
| | - Bruno Jean
- Centre de Recherches sur les Macromolécules Végétales (CERMAV), Université Grenoble Alpes, F-38000 Grenoble, France
| |
Collapse
|
124
|
Garg M, Linares M, Zozoulenko I. Theoretical Rationalization of Self-Assembly of Cellulose Nanocrystals: Effect of Surface Modifications and Counterions. Biomacromolecules 2020; 21:3069-3080. [DOI: 10.1021/acs.biomac.0c00469] [Citation(s) in RCA: 21] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Affiliation(s)
- Mohit Garg
- Laboratory of Organic Electronics, Department of Science and Technology (ITN), Campus Norrköping, Linköping University, Norrköping SE-60174, Sweden
| | - Mathieu Linares
- Laboratory of Organic Electronics, Department of Science and Technology (ITN), Campus Norrköping, Linköping University, Norrköping SE-60174, Sweden
- Scientific Visualization Group, Department of Science and Technology (ITN), Campus Norrköping, Linköping University, Norrköping SE-60174, Sweden
- Swedish e-Science Research Centre (SeRC), Linköping University, Linköping SE-581 83, Sweden
| | - Igor Zozoulenko
- Laboratory of Organic Electronics, Department of Science and Technology (ITN), Campus Norrköping, Linköping University, Norrköping SE-60174, Sweden
- Wallenberg Wood Science Center, Linköping University, Norrköping SE-60174, Sweden
| |
Collapse
|
125
|
Wang D, Liu R, Xie Y, Li J, Wang L. Fabrication of a laminated felt-like electromagnetic shielding material based on nickel-coated cellulose fibers via self-foaming effect in electroless plating process. Int J Biol Macromol 2020; 154:954-961. [PMID: 32184138 DOI: 10.1016/j.ijbiomac.2020.03.108] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/31/2020] [Revised: 03/08/2020] [Accepted: 03/12/2020] [Indexed: 11/25/2022]
Abstract
Sustainable low-cost cellulose-based electronics has exhibited brighter prospects. In this study, a laminated felt-like electromagnetic shielding material was prepared by using cellulose paper as the matrix through the self-foaming effect in electroless nickel plating process in which an efficient palladium-free activation was conducted that alkaline sodium borohydride (NaBH4) reduced nickel ions into nickel cluster to initiate the plating process. NaOH concentration in NaBH4 solution, pH of the plating bath and the plating time affected the thickness, metal deposition and surface resistance of the electromagnetic shielding material. By understanding the morphology, inner structure, chemical component and thermal stability, the pH in the plating solution is a key for the preparation. When the pH was 8.51, the electromagnetic shielding effective reached 65 dB in the frequency ranges of 9 kHz to 1.5 GHz, which could shield more than 99.99% electromagnetic radiation. This work offers a novel and feasible path to develop functional cellulose-based materials.
Collapse
Affiliation(s)
- Danyang Wang
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin, PR China
| | - Ruoting Liu
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin, PR China
| | - Yanjun Xie
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin, PR China
| | - Jian Li
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin, PR China
| | - Lijuan Wang
- Key Laboratory of Bio-based Materials Science and Technology of Ministry of Education, Northeast Forestry University, Harbin, PR China.
| |
Collapse
|
126
|
|
127
|
Jardin JM, Zhang Z, Hu G, Tam KC, Mekonnen TH. Reinforcement of rubber nanocomposite thin sheets by percolation of pristine cellulose nanocrystals. Int J Biol Macromol 2020; 152:428-436. [DOI: 10.1016/j.ijbiomac.2020.02.303] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/18/2019] [Revised: 02/25/2020] [Accepted: 02/25/2020] [Indexed: 02/02/2023]
|
128
|
Linker Regulation: Synthesis and Electrochemical Properties of Ferrocene-Decorated Cellulose. J Inorg Organomet Polym Mater 2020. [DOI: 10.1007/s10904-020-01562-1] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
|
129
|
Palanisamy S, Velusamy V, Balu S, Velmurugan S, Yang TCK, Chen SW. Sonochemical synthesis and anchoring of zinc oxide on hemin-mediated multiwalled carbon nanotubes-cellulose nanocomposite for ultra-sensitive biosensing of H 2O 2. ULTRASONICS SONOCHEMISTRY 2020; 63:104917. [PMID: 31945552 DOI: 10.1016/j.ultsonch.2019.104917] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/13/2019] [Revised: 11/27/2019] [Accepted: 12/02/2019] [Indexed: 06/10/2023]
Abstract
In this work, the metal oxide and biopolymer nanocomposites on multiwalled carbon nanotubes (MWCNT) were prepared using a simple sonochemical method. The hexagonal nanorods of zinc oxide (ZnO NR) were synthesized by probe sonication (frequency = 20 kHz, amplitude = 50) method and were integrated on ultrasonically functionalized MWCNT-cellulose nanocrystals (MWCNT-CNC) for the first time. The stable hemin bio-composites also were prepared using the bath sonication (37 kHz of frequency, 150 W of power) method, and was used for the selective and ultrasensitive electrochemical detection of H2O2. The UV-Vis spectroscopy studies confirmed the presence of native hemin on MWCNT-CNC/ZnO NR nanocomposite. Cyclic voltammetry studies revealed that an enhanced redox electrochemical behaviour of hemin was observed on hemin immobilised MWCNT-CNC/ZnO NR nanocomposite than that of other hemin modified electrodes. Also, the MWCNT-CNC/ZnO NR/hemin modified SPCE showed 2.3 folds higher electrocatalytic activity with a lower reduction potential (-0.2 V) towards H2O2 than that of other investigated hemin modified electrodes including hemin/MWCNT and hemin/CNC-ZnO. The fabricated biosensor displayed a stable amperometric response (-0.2 V vs Ag/AgCl) in the linear concentration of H2O2 ranging up to 4183.3 µM with a lower detection limit of 4.0 nM.
Collapse
Affiliation(s)
- Selvakumar Palanisamy
- Center of Precision Analysis and Material Research, National Taipei University of Technology, Taipei, Taiwan, ROC.
| | - Vijayalakshmi Velusamy
- Division of Electrical and Electronic Engineering, Manchester Metropolitan University, Chester Road, Manchester, United Kingdom.
| | - Sridharan Balu
- Department of Chemical Engineering and Biotechnology, National Taipei University of Technology, Taipei, Taiwan, ROC
| | - Sethupathi Velmurugan
- Department of Chemical Engineering and Biotechnology, National Taipei University of Technology, Taipei, Taiwan, ROC
| | - Thomas C K Yang
- Center of Precision Analysis and Material Research, National Taipei University of Technology, Taipei, Taiwan, ROC; Department of Chemical Engineering and Biotechnology, National Taipei University of Technology, Taipei, Taiwan, ROC.
| | - Shih-Wen Chen
- Department of Chemical Engineering and Biotechnology, National Taipei University of Technology, Taipei, Taiwan, ROC
| |
Collapse
|
130
|
Doh H, Lee MH, Whiteside WS. Physicochemical characteristics of cellulose nanocrystals isolated from seaweed biomass. Food Hydrocoll 2020. [DOI: 10.1016/j.foodhyd.2019.105542] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
|
131
|
Che KM, Zhang MZ, He JL, Ni PH. Polyphosphoester-modified Cellulose Nanocrystals for Stabilizing Pickering Emulsion Polymerization of Styrene. CHINESE JOURNAL OF POLYMER SCIENCE 2020. [DOI: 10.1007/s10118-020-2404-z] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
132
|
Calvino C, Macke N, Kato R, Rowan SJ. Development, processing and applications of bio-sourced cellulose nanocrystal composites. Prog Polym Sci 2020. [DOI: 10.1016/j.progpolymsci.2020.101221] [Citation(s) in RCA: 57] [Impact Index Per Article: 14.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
|
133
|
Rabbi MA, Rahman MM, Minami H, Habib MR, Ahmad H. Ag impregnated sub-micrometer crystalline jute cellulose particles: Catalytic and antibacterial properties. Carbohydr Polym 2020; 233:115842. [DOI: 10.1016/j.carbpol.2020.115842] [Citation(s) in RCA: 25] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2019] [Revised: 12/17/2019] [Accepted: 01/07/2020] [Indexed: 01/29/2023]
|
134
|
Facile synthesis of TiO2/CNC nanocomposites for enhanced Cr(VI) photoreduction: Synergistic roles of cellulose nanocrystals. Carbohydr Polym 2020; 233:115838. [DOI: 10.1016/j.carbpol.2020.115838] [Citation(s) in RCA: 26] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/01/2019] [Revised: 12/02/2019] [Accepted: 01/06/2020] [Indexed: 01/01/2023]
|
135
|
Tavakolian M, Jafari SM, van de Ven TGM. A Review on Surface-Functionalized Cellulosic Nanostructures as Biocompatible Antibacterial Materials. NANO-MICRO LETTERS 2020; 12:73. [PMID: 34138290 PMCID: PMC7770792 DOI: 10.1007/s40820-020-0408-4] [Citation(s) in RCA: 92] [Impact Index Per Article: 23.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/06/2019] [Accepted: 02/06/2020] [Indexed: 05/07/2023]
Abstract
As the most abundant biopolymer on the earth, cellulose has recently gained significant attention in the development of antibacterial biomaterials. Biodegradability, renewability, strong mechanical properties, tunable aspect ratio, and low density offer tremendous possibilities for the use of cellulose in various fields. Owing to the high number of reactive groups (i.e., hydroxyl groups) on the cellulose surface, it can be readily functionalized with various functional groups, such as aldehydes, carboxylic acids, and amines, leading to diverse properties. In addition, the ease of surface modification of cellulose expands the range of compounds which can be grafted onto its structure, such as proteins, polymers, metal nanoparticles, and antibiotics. There are many studies in which cellulose nano-/microfibrils and nanocrystals are used as a support for antibacterial agents. However, little is known about the relationship between cellulose chemical surface modification and its antibacterial activity or biocompatibility. In this study, we have summarized various techniques for surface modifications of cellulose nanostructures and its derivatives along with their antibacterial and biocompatibility behavior to develop non-leaching and durable antibacterial materials. Despite the high effectiveness of surface-modified cellulosic antibacterial materials, more studies on their mechanism of action, the relationship between their properties and their effectivity, and more in vivo studies are required.
Collapse
Affiliation(s)
- Mandana Tavakolian
- Department of Chemical Engineering, McGill University, Montreal, QC, H3A 0C5, Canada
- Pulp and Paper Research Center, McGill University, Montreal, QC, H3A 0C7, Canada
- Quebec Centre for Advanced Materials (QCAM/CQMF), Montreal, Canada
| | - Seid Mahdi Jafari
- Department of Food Materials and Process Design Engineering, Gorgan University of Agricultural Science and Natural Resources, Gorgan, Iran.
| | - Theo G M van de Ven
- Pulp and Paper Research Center, McGill University, Montreal, QC, H3A 0C7, Canada.
- Quebec Centre for Advanced Materials (QCAM/CQMF), Montreal, Canada.
- Department of Chemistry, McGill University, Montreal, QC, H3A 0B8, Canada.
| |
Collapse
|
136
|
Ly M, Mekonnen TH. Cationic surfactant modified cellulose nanocrystals for corrosion protective nanocomposite surface coatings. J IND ENG CHEM 2020. [DOI: 10.1016/j.jiec.2019.12.014] [Citation(s) in RCA: 25] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
|
137
|
Tshikovhi A, Mishra SB, Mishra AK. Nanocellulose-based composites for the removal of contaminants from wastewater. Int J Biol Macromol 2020; 152:616-632. [PMID: 32097743 DOI: 10.1016/j.ijbiomac.2020.02.221] [Citation(s) in RCA: 50] [Impact Index Per Article: 12.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/20/2019] [Revised: 02/13/2020] [Accepted: 02/19/2020] [Indexed: 12/17/2022]
Abstract
Polymers derived from plant and animal sources are of great interest in wastewater remediation due to their cost-effectiveness and renewable adsorption capabilities, one such polymer is nanocellulose (NC). NC has gained a lot of attention in various research fields due to its abundance in nature, nano-dimension, high surface area, stability and bio-compatibility. As a result, NC has emerged as a great potential adsorbent for the removal of contaminants such as heavy metals, organic dyes, oils, pharmaceutical and etc. in the environmental remediation. This review focuses on the description of the building blocks, structure, properties, isolation and also discusses the potential of nanocellulose based composites materials with reinforcements such as activated carbon, carbon nanotube, graphene oxides, metals, non-metals and ceramics that were effectively used as an adsorbents for diverse organic and inorganic contaminants in water.
Collapse
Affiliation(s)
- A Tshikovhi
- Nanotechnology and Water Sustainability Research Unit, College of Science, Engineering and Technology, University of South Africa, Florida, 1709 Johannesburg, South Africa
| | - Shivani B Mishra
- Nanotechnology and Water Sustainability Research Unit, College of Science, Engineering and Technology, University of South Africa, Florida, 1709 Johannesburg, South Africa
| | - Ajay K Mishra
- Nanotechnology and Water Sustainability Research Unit, College of Science, Engineering and Technology, University of South Africa, Florida, 1709 Johannesburg, South Africa.
| |
Collapse
|
138
|
Sukhavattanakul P, Manuspiya H. Fabrication of hybrid thin film based on bacterial cellulose nanocrystals and metal nanoparticles with hydrogen sulfide gas sensor ability. Carbohydr Polym 2020; 230:115566. [DOI: 10.1016/j.carbpol.2019.115566] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/09/2019] [Revised: 10/31/2019] [Accepted: 11/01/2019] [Indexed: 01/19/2023]
|
139
|
The stabilizing effect of cellulose crystals in O/W emulsions obtained by ultrasound process. Food Res Int 2020; 128:108746. [DOI: 10.1016/j.foodres.2019.108746] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2019] [Revised: 10/01/2019] [Accepted: 10/04/2019] [Indexed: 11/19/2022]
|
140
|
Lasrado D, Ahankari S, Kar K. Nanocellulose‐based polymer composites for energy applications—A review. J Appl Polym Sci 2020. [DOI: 10.1002/app.48959] [Citation(s) in RCA: 62] [Impact Index Per Article: 15.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
Affiliation(s)
- Dylan Lasrado
- School of Mechanical Engineering, Student of EngineeringVIT University Vellore Tamil Nadu 632014 India
| | - Sandeep Ahankari
- School of Mechanical EngineeringVIT University Vellore Tamil Nadu 632014 India
| | - Kamal Kar
- Department of Mechanical Engineering and Materials Science ProgrammeIIT Kanpur Kanpur Uttar Pradesh 208016 India
| |
Collapse
|
141
|
Zhang K, Hujaya SD, Järvinen T, Li P, Kauhanen T, Tejesvi MV, Kordas K, Liimatainen H. Interfacial Nanoparticle Complexation of Oppositely Charged Nanocelluloses into Functional Filaments with Conductive, Drug Release, or Antimicrobial Property. ACS APPLIED MATERIALS & INTERFACES 2020; 12:1765-1774. [PMID: 31820632 DOI: 10.1021/acsami.9b15555] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Construction of colloidal nanoparticles (NPs) into advanced functional nanocomposites and hybrids with the predesigned hierarchical structure and high-performance is attractive, especially for natural biological nanomaterials, such as proteins and polysaccharides. Herein, a simple and sustainable approach called interfacial NP complexation (INC) was applied to construct diverse functional (conductive, drug-loaded, or antimicrobial) nanocomposite filaments from oppositely charged colloidal nanocelluloses. By incorporating different additives during the INC process, including multiwalled carbon nanotube, an antitumor drug (doxorubicin hydrochloride), and metal (silver) NPs (Ag NPs), high-performance functional continuous filaments were synthesized, and their potential applications in electronics, drug delivery, and antimicrobial materials were investigated, respectively. This novel INC method based on charged colloidal NPs opens new avenues for building various functional filaments for a diversity of end uses.
Collapse
Affiliation(s)
- Kaitao Zhang
- Fibre and Particle Engineering Research Unit, Faculty of Technology , University of Oulu , P.O. Box 4300, FI-90014 Oulu , Finland
| | - Sry D Hujaya
- Fibre and Particle Engineering Research Unit, Faculty of Technology , University of Oulu , P.O. Box 4300, FI-90014 Oulu , Finland
| | - Topias Järvinen
- Microelectronics Research Unit, Faculty of Information Technology and Electrical Engineering , University of Oulu , 90014 Oulu , Finland
| | - Panpan Li
- Fibre and Particle Engineering Research Unit, Faculty of Technology , University of Oulu , P.O. Box 4300, FI-90014 Oulu , Finland
| | - Topias Kauhanen
- Department of Ecology and Genetics , University of Oulu , P.O. Box 3000, 90014 Oulu , Finland
| | - Mysore V Tejesvi
- Department of Ecology and Genetics , University of Oulu , P.O. Box 3000, 90014 Oulu , Finland
- Chain Antimicrobials Limited , Teknologiantie 2 , FI-90590 Oulu , Finland
| | - Krisztian Kordas
- Microelectronics Research Unit, Faculty of Information Technology and Electrical Engineering , University of Oulu , 90014 Oulu , Finland
| | - Henrikki Liimatainen
- Fibre and Particle Engineering Research Unit, Faculty of Technology , University of Oulu , P.O. Box 4300, FI-90014 Oulu , Finland
| |
Collapse
|
142
|
Yue Y, Wang X, Wu Q, Han J, Jiang J. Highly recyclable and super-tough hydrogel mediated by dual-functional TiO 2 nanoparticles toward efficient photodegradation of organic water pollutants. J Colloid Interface Sci 2019; 564:99-112. [PMID: 31911232 DOI: 10.1016/j.jcis.2019.12.069] [Citation(s) in RCA: 28] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/15/2019] [Revised: 12/06/2019] [Accepted: 12/16/2019] [Indexed: 12/23/2022]
Abstract
A novel photocatalytic hydrogel was prepared by loading TiO2 nanoparticles (TiO2 NPs) onto the surface of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized chitin nanofibers (TOCNs), which were further incorporated into the polyacrylamide (PAM) matrix. The resultant hydrogel exhibited a macro-porous structure with a low density (~1.45 g/cm3) and high water content (~80%). The well-dispersed TiO2 NPs not only acted as a crosslinking agent for bridging the three-dimensional porous network structure, but also endowed the hydrogel with good catalytic activity. After the introduction of TiO2 accounting for 10 wt% of the hydrogel mass, the hydrogels showed compressive strength of 1.46 MPa at 70% strain, tensile stress of 316 kPa, tensile strain of 310%, toughness of 47.25 kJ/m3 and fatigue resistance. Compared with neat TOCN-PAM hydrogel, the uniaxial compressive and tensile strengths of the TiO2-TOCN-PAM10 hydrogel increased 6.35-fold and 3.70-fold, respectively. Furthermore, the removal of methyl orange (MO) was attributed to the synergistic effect of the adsorption and photocatalytic degradation of the hydrogels. The hydrogels adsorbed up to 8.5% of MO after 150 min of adsorption and a photocatalytic degradation rate of 97.3% achieved after 90 min of UV irradiation at pH = 2. Especially, the TiO2-TOCN-PAM10 hydrogel exhibited excellent recycling performance: its MO removal efficiency was around 96% even after 10 reuse cycles. The as-prepared hydrogels, with characteristics of excellent stretchability, photocatalytic activity and recyclability, are expected to be used in alleviating organic pollutants in practical wastewater treatments.
Collapse
Affiliation(s)
- Yiying Yue
- College of Biology and the Environment, Nanjing Forestry University, Nanjing 210037, Jiangsu, China
| | - Xianhui Wang
- College of Biology and the Environment, Nanjing Forestry University, Nanjing 210037, Jiangsu, China
| | - Qinglin Wu
- School of Renewable Natural Resources, Louisiana State University Agricultural Center, Baton Rouge 70803, LA, USA
| | - Jingquan Han
- College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, Jiangsu, China.
| | - Jianchun Jiang
- College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, Jiangsu, China; Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry, Nanjing 210042, Jiangsu, China.
| |
Collapse
|
143
|
Kamelnia E, Divsalar A, Darroudi M, Yaghmaei P, Sadri K. Synthesis, 99mTc-radiolabeling, and biodistribution of new cellulose nanocrystals from Dorema kopetdaghens. Int J Biol Macromol 2019; 146:299-310. [PMID: 31881307 DOI: 10.1016/j.ijbiomac.2019.12.179] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/02/2019] [Revised: 11/30/2019] [Accepted: 12/20/2019] [Indexed: 10/25/2022]
Abstract
Cellulose nanocrystals (CNCs) are known as nano-biomaterials that can be achieved from the different sources. The designated CNCs have been successfully fabricated from the roots of Dorema kopetdaghens (Dk) plant by sulphuric acid hydrolysis method. Structural analysis has been carried out by the means of XRD, FTIR, and TGA/DTG procedures. The XRD results have indicated that the crystalline structure of CNCs had been cellulose I with the crystallinity index of 83.20% and size of 4.95 nm. The FTIR spectra have shown that the resulting samples have been related to the cellulose species. The thermal properties of CNCs have exhibited a lower thermal stability in comparison to the untreated roots. It has been indicated by the morphological analyses of FESEM, TEM, and AFM that the nanoparticles had contained a spherical shape. Also, the cytotoxicity of CNCs against A549 cell line has not exhibited any cytotoxic effects. The analysis of labeling efficiency in regards to 99mTc-CNCs has been observed to be above 98%, while the biodistribution of radioactivity has displayed a high uptake by the kidneys and blood circulation. Therefore, it is possible to transform the low-cost by-product into a beneficial substance such as CNCs that can be utilized in bioimaging applications.
Collapse
Affiliation(s)
- Elahe Kamelnia
- Department of Biology, Faculty of Science, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Adeleh Divsalar
- Department of Cell and Molecular Biology, Faculty of Biological Sciences, Kharazmi University, Tehran, Iran.
| | - Majid Darroudi
- Nuclear Medicine Research Center, Mashhad University of Medical Sciences, Mashhad, Iran; Department of Modern Sciences and Technologies, School of Medicine, Mashhad University of Medical Sciences, Mashhad, Iran.
| | - Parichehr Yaghmaei
- Department of Biology, Faculty of Science, Science and Research Branch, Islamic Azad University, Tehran, Iran.
| | - Kayvan Sadri
- Nuclear Medicine Research Center, Mashhad University of Medical Sciences, Mashhad, Iran.
| |
Collapse
|
144
|
Imlimthan S, Correia A, Figueiredo P, Lintinen K, Balasubramanian V, Airaksinen AJ, Kostiainen MA, Santos HA, Sarparanta M. Systematic in vitro biocompatibility studies of multimodal cellulose nanocrystal and lignin nanoparticles. J Biomed Mater Res A 2019; 108:770-783. [PMID: 31794149 DOI: 10.1002/jbm.a.36856] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2019] [Revised: 11/27/2019] [Accepted: 11/29/2019] [Indexed: 01/09/2023]
Abstract
Natural biopolymer nanoparticles (NPs), including nanocrystalline cellulose (CNC) and lignin, have shown potential as scaffolds for targeted drug delivery systems due to their wide availability, cost-efficient preparation, and anticipated biocompatibility. As both CNC and lignin can potentially cause complications in cell viability assays because of their ability to scatter the emitted light and absorb the assay reagents, we investigated the response of bioluminescent (CellTiter-Glo®), colorimetric (MTT® and AlamarBlue®), and fluorometric (LIVE/DEAD®) assays for the determination of the biocompatibility of the multimodal CNC and lignin constructs in murine RAW 264.7 macrophages and 4T1 breast adenocarcinoma cell lines. Here, we have developed multimodal CNC and lignin NPs harboring the radiometal chelator 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid and the fluorescent dye cyanine 5 for the investigation of nanomaterial biodistribution in vivo with nuclear and optical imaging, which were then used as the model CNC and lignin nanosystems in the cell viability assay comparison. CellTiter-Glo® based on the detection of ATP-dependent luminescence in viable cells revealed to be the best assay for both nanoconstructs for its robust linear response to increasing NP concentration and lack of interference from either of the NP types. Both multimodal CNC and lignin NPs displayed low cytotoxicity and favorable interactions with the cell lines, suggesting that they are good candidates for nanosystem development for targeted drug delivery in breast cancer and for theranostic applications. Our results provide useful guidance for cell viability assay compatibility for CNC and lignin NPs and facilitate the future translation of the materials for in vivo applications.
Collapse
Affiliation(s)
- Surachet Imlimthan
- Department of Chemistry, Radiochemistry, University of Helsinki, Helsinki, Finland
| | - Alexandra Correia
- Drug Research Program, Faculty of Pharmacy, Division of Pharmaceutical Chemistry and Technology, University of Helsinki, Helsinki, Finland
| | - Patrícia Figueiredo
- Drug Research Program, Faculty of Pharmacy, Division of Pharmaceutical Chemistry and Technology, University of Helsinki, Helsinki, Finland
| | - Kalle Lintinen
- Biohybrid Materials, Department of Bioproducts and Biosystems, Aalto University, Espoo, Finland
| | - Vimalkumar Balasubramanian
- Drug Research Program, Faculty of Pharmacy, Division of Pharmaceutical Chemistry and Technology, University of Helsinki, Helsinki, Finland
| | - Anu J Airaksinen
- Department of Chemistry, Radiochemistry, University of Helsinki, Helsinki, Finland
| | - Mauri A Kostiainen
- Biohybrid Materials, Department of Bioproducts and Biosystems, Aalto University, Espoo, Finland
| | - Hélder A Santos
- Drug Research Program, Faculty of Pharmacy, Division of Pharmaceutical Chemistry and Technology, University of Helsinki, Helsinki, Finland.,Helsinki Institute of Life Science, Helsinki, Finland
| | - Mirkka Sarparanta
- Department of Chemistry, Radiochemistry, University of Helsinki, Helsinki, Finland
| |
Collapse
|
145
|
Zhan C, Li Y, Sharma PR, He H, Sharma SK, Wang R, Hsiao BS. A study of TiO 2 nanocrystal growth and environmental remediation capability of TiO 2/CNC nanocomposites. RSC Adv 2019; 9:40565-40576. [PMID: 32215205 PMCID: PMC7069505 DOI: 10.1039/c9ra08861j] [Citation(s) in RCA: 16] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/28/2019] [Accepted: 11/30/2019] [Indexed: 12/13/2022] Open
Abstract
Nanocellulose, which can be derived from any cellulosic biomass, has emerged as an appealing nanoscale scaffold to develop inorganic-organic nanocomposites for a wide range of applications. In this study, titanium dioxide (TiO2) nanocrystals were synthesized in the cellulose nanocrystal (CNC) scaffold using a simple approach, i.e., hydrolysis of a titanium oxysulfate precursor in a CNC suspension at low temperature. The resulting TiO2 nanoparticles exhibited a narrow size range between 3 and 5 nm, uniformly distributed on and strongly adhered to the CNC surface. The structure of the resulting nanocomposite was evaluated by transmission electron microscopy (TEM) and X-ray diffraction (XRD) methods. The growth mechanism of TiO2 nanocrystals in the CNC scaffold was also investigated by solution small-angle X-ray scattering (SAXS), where the results suggested the mineralization process could be described by the Lifshitz-Slyozov-Wagner theory for Ostwald ripening. The demonstrated TiO2/CNC nanocomposite system exhibited excellent performance in dye degradation and antibacterial activity, suitable for a wide range of environmental remediation applications.
Collapse
Affiliation(s)
- Chengbo Zhan
- Department of Chemistry, Stony Brook University, Stony Brook, NY 11794-3400, USA. ; Tel: +1-631-632-7793
| | - Yanxiang Li
- CAS Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
| | - Priyanka R Sharma
- Department of Chemistry, Stony Brook University, Stony Brook, NY 11794-3400, USA. ; Tel: +1-631-632-7793
| | - Hongrui He
- Department of Chemistry, Stony Brook University, Stony Brook, NY 11794-3400, USA. ; Tel: +1-631-632-7793
| | - Sunil K Sharma
- Department of Chemistry, Stony Brook University, Stony Brook, NY 11794-3400, USA. ; Tel: +1-631-632-7793
| | - Ruifu Wang
- Department of Chemistry, Stony Brook University, Stony Brook, NY 11794-3400, USA. ; Tel: +1-631-632-7793
| | - Benjamin S Hsiao
- Department of Chemistry, Stony Brook University, Stony Brook, NY 11794-3400, USA. ; Tel: +1-631-632-7793
| |
Collapse
|
146
|
Li Q, Xie B, Wang Y, Wang Y, Peng L, Li Y, Li B, Liu S. Cellulose nanofibrils from Miscanthus floridulus straw as green particle emulsifier for O/W Pickering emulsion. Food Hydrocoll 2019. [DOI: 10.1016/j.foodhyd.2019.105214] [Citation(s) in RCA: 44] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
|
147
|
Wijaya CJ, Ismadji S, Aparamarta HW, Gunawan S. Optimization of cellulose nanocrystals from bamboo shoots using Response Surface Methodology. Heliyon 2019; 5:e02807. [PMID: 31844732 PMCID: PMC6889032 DOI: 10.1016/j.heliyon.2019.e02807] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/09/2019] [Revised: 07/29/2019] [Accepted: 11/07/2019] [Indexed: 12/15/2022] Open
Abstract
Cellulose-based advanced materials, such as cellulose nanocrystals (CNC), have high potential application for drug delivery system. In this study, the CNC were produced from bamboo shoots using acid hydrolysis process. The delignification of bamboo shoots was conducted using alkali and hydrogen peroxide pretreatment processes. The operating condition of the production of CNC from bamboo shoots was optimized using Response Surface Methodology (RSM) based on the yield and crystals recovery as the responses. The optimum CNC yield of 50.67 ± 0.74% with a crystals recovery of 77.99 ± 1.14% was obtained at the sulfuric acid concentration of 54.73 wt% and a temperature of 39 °C from the optimization based on the yield. This optimization has been validated to confirm the accuracy.
Collapse
Affiliation(s)
- Christian J. Wijaya
- Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Sepuluh Nopember, Keputih Sukolilo, Surabaya, 60111, Indonesia
- Department of Chemical Engineering, Widya Mandala Surabaya Catholic University, Kalijudan 37, Surabaya, 60114, Indonesia
| | - Suryadi Ismadji
- Department of Chemical Engineering, Widya Mandala Surabaya Catholic University, Kalijudan 37, Surabaya, 60114, Indonesia
| | - Hakun W. Aparamarta
- Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Sepuluh Nopember, Keputih Sukolilo, Surabaya, 60111, Indonesia
| | - Setiyo Gunawan
- Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Sepuluh Nopember, Keputih Sukolilo, Surabaya, 60111, Indonesia
| |
Collapse
|
148
|
Jiang Y, Zhang Y, Ding L, De La Cruz JA, Wang B, Feng X, Chen Z, Mao Z, Sui X. Regenerated cellulose-dispersed polystyrene composites enabled via Pickering emulsion polymerization. Carbohydr Polym 2019; 223:115079. [DOI: 10.1016/j.carbpol.2019.115079] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/03/2019] [Revised: 07/11/2019] [Accepted: 07/11/2019] [Indexed: 12/14/2022]
|
149
|
Tang J, Javaid MU, Pan C, Yu G, Berry RM, Tam KC. Self-healing stimuli-responsive cellulose nanocrystal hydrogels. Carbohydr Polym 2019; 229:115486. [PMID: 31826484 DOI: 10.1016/j.carbpol.2019.115486] [Citation(s) in RCA: 33] [Impact Index Per Article: 6.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/30/2019] [Revised: 10/12/2019] [Accepted: 10/15/2019] [Indexed: 01/03/2023]
Abstract
A facile and universal approach to prepare cellulose nanocrystal reinforced functional hydrogels is proposed. An organic solvent-free and eco-friendly method was adopted, where both the modification and polymerization were conducted in an aqueous solution. Cellulose nanocrystal (CNC) and sodium alginate (SA) were first oxidized under mild conditions to introduce aldehyde groups. Subsequently, amine-containing vinyl functionalized monomers were introduced to the surface of CNC or backbone of oxidized SA via a dynamic Schiff-base reaction. The bio-based hydrogels were then prepared via a one-pot in-situ polymerization, where the functional CNC and SA served as novel macro-cross-linkers that contributed to the structural integrity and mechanical stability of the hydrogels. The hydrogels displayed uniform chemical and macroscopic structures and could self-heal within several hours at room temperature. The design of specific monomers will allow the introduction of stimuli-responsive properties to the functional hydrogels and a chemically robust thermally-triggered actuator was demonstrated. Due to its flexible design and practical approach, the hydrogels could find potential uses in agricultural and pharmaceutical products.
Collapse
Affiliation(s)
- Juntao Tang
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, China.
| | - Muhammad Umar Javaid
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, China
| | - Chunyue Pan
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, China
| | - Guipeng Yu
- College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, China
| | - Richard M Berry
- CelluForce, Inc., 625 President-Kennedy Ave., Montreal, Quebec, H3A 1K2, Canada
| | - Kam Chiu Tam
- Department of Chemical Engineering, Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue West, Waterloo, ON, N2L 3G1, Canada.
| |
Collapse
|
150
|
|