Hazardous contaminants in the environment and their laccase-assisted degradation - A review

Overview of Recent Advances in Immobilisation Techniques for Phenol Oxidases in Solution

Over the past two decades, phenol oxidases, particularly laccases and tyrosinases, have been extensively used for the removal of numerous pollutants in wastewaters due to their broad substrate specificity and their ability to use readily accessible molecular oxygen as the essential cofactor. As for other enzymes, immobilisation of laccases and tyrosinases has been shown to improve the performance and efficiency of the biocatalysts in solution. Several reviews have addressed the enzyme immobilisation techniques and the application of phenol oxidases to decontaminate wastewaters. This paper offers an overview of the recent publications, mainly from 2012 onwards, on the various immobilisation techniques applied to laccases and tyrosinases to induce and/or increase the performance of the biocatalysts. In this paper, the emphasis is on the efficiencies achieved, in terms of structural modifications, stability and resistance to extreme conditions (pH, temperature, inhibitors, etc.), reactivity, reusability, and broad substrate specificity, particularly for application in bioremediation processes. The advantages and disadvantages of several enzyme immobilisation techniques are also discussed. The relevance and effectiveness of the immobilisation techniques with respect to wastewater decontamination are critically assessed. A perspective on the future directions for large-scale application of the phenol oxidases in immobilised forms is provided.

Laccases and peroxidases: The smart, greener and futuristic biocatalytic tools to mitigate recalcitrant emerging pollutants

Various organic pollutants so-called emerging pollutants (EPs), including active residues from pharmaceuticals, pesticides, surfactants, hormones, and personal care products, are increasingly being detected in numerous environmental matrices including water. The persistence of these EPs can cause adverse ecological and human health effects even at very small concentrations in the range of micrograms per liter or lower, hence called micropollutants (MPs). The existence of EPs/MPs tends to be challenging to mitigate from the environment effectively. Unfortunately, most of them are not removed during the present-day treatment plants. So far, a range of treatment processes and degradation methods have been introduced and deployed against various EPs and/or MPs, such as ultrafiltration, nanofiltration, advanced oxidation processes (AOPs) and enzyme-based treatments coupled with membrane filtrations. To further strengthen the treatment processes and to overcome the EPs/MPs effective removal dilemma, numerous studies have revealed the applicability and notable biocatalytic potentialities of laccases and peroxidases to degrade different classes of organic pollutants. Exquisite selectivity and unique catalytic properties make these enzymes powerful biocatalytic candidates for bio-transforming an array of toxic contaminants to harmless entities. This review focuses on the use of laccases and peroxidases, such as soybean peroxidase (SBP), horseradish peroxidase (HRP), lignin peroxidase (LiP), manganese peroxidase (MnP), and chloroperoxidase (CPO) as a greener oxidation route towards efficient and effective removal or degradation of EPs/MPs.

The heterologous expression, characterization, and application of a novel laccase from Bacillus velezensis

Laccases have a huge potential in numerous environmental and industrial applications due to the ability to oxidized a wide range of substrates. Here, a novel laccase gene from the identified Bacillus velezensis TCCC 111904 was heterologously expressed in Escherichia coli. The optimal temperature and pH for oxidation by recombinant laccase (rLac) were 80 °C and 5.5, respectively, in the case of the substrate 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and 80 °C and 7.0, respectively, in the case of 2,6-dimethoxyphenol (2,6-DMP). rLac exhibited high thermostability and pH stability over a wide range (pH 3.0, 7.0, and 9.0). Additionally, most of the metal ions did not inhibit the activity of rLac significantly. rLac showed great tolerance against high concentration of NaCl, and 50.8% of its initial activity remained in the reaction system containing 500 mM NaCl compared to the control. Moreover, rLac showed a high efficiency in decolorizing different types of dyes including azo, anthraquinonic, and triphenylmethane dyes at a high temperature (60 °C) and over an extensive pH range (pH 5.5, 7.0, and 9.0). These unique characteristics of rLac indicated that it could be a potential candidate for applications in treatment of dye effluents and other industrial processes.

Biodegradation and toxicity reduction of nonylphenol, 4-tert-octylphenol and 2,4-dichlorophenol by the ascomycetous fungus Thielavia sp HJ22: Identification of fungal metabolites and proposal of a putative pathway

Research on the biodegradation of emerging pollutants is gained great focus regarding their detrimental effects on the environment and humans. The objective of the present study was to evaluate the ability of the ascomycetes Thielavia sp HJ22 to remove the phenolic xenobiotics nonylphenol (NP), 4-tert-octylphenol (4-tert-OP) and 2,4-dichlorophenol (2,4-DCP). The strain showed efficient degradation of NP and 4-tert-OP with 95% and 100% removal within 8 h of incubation, respectively. A removal rate of 80% was observed with 2,4-DCP within the same time. Under experimental conditions, the degradation of the tested pollutants concomitantly increased with the laccase production and cytochrome P450 monooxygenases inhibition. This study showed the involvement of laccase in pollutants removal together with biosorption mechanisms. Additionally, results demonstrated the participation of cytochrome P450 monooxygenase in the elimination of 2,4-DCP. Liquid chromatography-mass spectrometry analysis revealed several intermediates, mainly hydroxylated and oxidized compounds with less harmful effects compared to the parent compounds. A decrease in the toxicity of the identified metabolites was observed using Aliivibrio fischeri as bioindicator. The metabolic pathways of degradation were proposed based on the identified metabolites. The results point out the potential of Thielavia strains in the degradation and detoxification of phenolic xenobiotics.

Biodegradation of polyethylene microplastic particles by the fungus Aspergillus flavus from the guts of wax moth Galleria mellonella

Polyethylene (PE) products are widely used in daily life, agriculture, and industry because of their convenience and economic value. However, PE is one of the polymer materials remarkably resistant to degradation. Current methods of plastic waste disposal pose a threat to the environment and produce microplastic particles (MPP), which becomes a global environmental concern because of its accumulation. In this study, a PE-degrading fungus Aspergillus flavus named PEDX3, was isolated from the gut contents of wax moth Galleria mellonella. The results indicated that high-density polyethylene (HDPE) MPP was degraded into the MPP with a lower molecular weight by strain PEDX3 after 28 days incubation. In addition, Fourier Transform - Infrared Spectroscopy (FT-IR) results showed the appearance of carbonyl groups and ether groups of MPP, which also validated the degradation of PE. Furthermore, the potential degradation enzymes were investigated by Reverse Transcription-Polymerase Chain Reaction (RT-PCR). Finally, two laccase-like multicopper oxidases (LMCOs) genes, AFLA_006190 and AFLA_053930, displayed up-regulated expression during the degradation process, which may be the candidate PE-degrading enzymes. These results have demonstrated that the A. flavus strain PEDX3 has an ability to degrade microplastic particles and the two PE-degrading enzymes provide a promising application for the PE MPP remediation.

Development of photocatalytic paint based on TiO2 and photopolymer resin for the degradation of organic pollutants in water

While the use of TiO2 nanoparticles in the form of slurry/suspension requires energy-intensive separation processes, its immobilization in solid support may open new opportunities in the area of sustainable water treatment technologies. In this study, a novel method for the development of photocatalytic paint based on TiO₂ nanoparticles and acrylate-based photopolymer resin is reported. The paint (TiO₂@polymer) was applied on substrates such as plastic petri dish and glass jar, which was polymerized/solidified by ultraviolet light irradiation. The painted petri dish and glass jar were used for the photocatalytic degradation of model organic pollutants viz. methyl orange (MO), methylene blue (MB), and indole in deionized water, simulated fresh drinking water, and tap water matrices. The photocatalytic degradation studies were performed under sunlight and UV-B light were used for. The sunlight-assisted photocatalytic degradation of MO and MB was found to be faster and more efficient than the UV-B light-assisted ones. Under UV-B light irradiation, it took 120 min to degrade about 80% of 6 ppm MB solution, whereas under sunlight irradiation it took 60 min to degrade about 90% of the same MB solution. The photocatalytic paint generated hydroxyl radical (·OH) under the UV-B and sunlight irradiation, which was studied by the terephthalic acid fluorescence tests. Further, the potential release of TiO₂ during the exposure to UV irradiation was studied by single particle ICP-MS analysis.

Efficient removal of 2,4-dinitrophenol from synthetic wastewater and contaminated soil samples using free and immobilized laccases

Among hazardous pollutants, 2,4-Dinitrophenol (2,4-DNP) is considered highly toxic and possesses a remarkable resistance to degradation. Therefore, investigation of the possible mechanisms for removal of such pollutants is important. Laccase enzyme can decompose phenolics despite the fact that its application has been limited due to lack of possibility to reuse it. Immobilization can overcome this problem. In this paper, laccase complexes with montmorillonite K10 and zeolite were used to decompose 2,4-DNP with concentrations of 1.5 mg l^-1 and 50 mg kg^-1 in synthetic wastewater and soil, respectively. The maximum removal of pollutant from wastewater in samples containing laccase-zeolite and laccase-montmorillonite complexes were 99 and 93.3%, respectively, which occurred at 4 h incubation compared with 6 h for free laccase. The maximum removal of pollutant from soil was observed for all treatments after 16 h of incubation. The maximum removal for samples containing free laccase, laccase-zeolite, and laccase-montmorillonite complexes were 98.5%, 98.6%, and 90.4%, respectively. Control sample also showed maximum removal of 35.8%. In general, application of laccase-zeolite complexes in aqueous environment, and these complexes and free laccases in soil was found very effective in degradation of 2,4-DNP. Hence, the use of laccase, especially immobilized laccases, for removal of 2,4-DNP from environment is promising.

High Throughput Sediment DNA Sequencing Reveals Azo Dye Degrading Bacteria Inhabit Nearshore Sediments

Estuaries and coastal environments are often regarded as a critical resource for the bioremediation of organic pollutants such as azo dyes due to their high abundance and diversity of extremophiles. Bioremediation through the activities of azoreductase, laccase, and other associated enzymes plays a critical role in the removal of azo dyes in built and natural environments. However, little is known about the biodegradation genes and azo dye degradation genes residing in sediments from coastal and estuarine environments. In this study, high-throughput sequencing (16S rRNA) of sediment DNA was used to explore the distribution of azo-dye degrading bacteria and their functional genes in estuaries and coastal environments. Unlike laccase genes, azoreductase (azoR), and naphthalene degrading genes were ubiquitous in the coastal and estuarine environments. The relative abundances of most functional genes were higher in the summer compared to winter at locations proximal to the mouths of the Hanjiang River and its distributaries. These results suggested inland river discharges influenced the occurrence and abundance of azo dye degrading genes in the nearshore environments. Furthermore, the azoR genes had a significant negative relationship with total organic carbon, Hg, and Cr (p < 0.05). This study provides critical insights into the biodegradation potential of indigenous microbial communities in nearshore environments and the influence of environmental factors on microbial structure, composition, and function which is essential for the development of technologies for bioremediation in azo dye contaminated sites.

Inhibition in multicopper oxidases: a critical review

This review critiques the literature on inhibition of O₂-reduction catalysis in multicopper oxidases like laccase and bilirubin oxidase and provide recommendations for best practice when carrying out experiments and interpreting published data.

Identification of fungal enzymes involving 3-phenoxybenzoic acid degradation by using enzymes inhibitors and inducers

Pyrethroid residues in food and the environment can be bio-transformed into 3-phenoxybenzoic acid (3-PBA); It is more toxic than the parent compounds, and has been detected in milk, soil, and human urine. In this study, when incubated at 30 °C and 180 rpm for 48 h, mycelial pellets during logarithmic growth phase were obtained and washed 2 times by phosphate buffer. The cell debris solutions and filter liquor from inducible and non-inducible samples were cultured with 3-PBA and its intermediate metabolites at same condition, and the location and induction of enzymes were analyzed by the degradation. Then Cytochrome P450 (CYP450), lignin peroxidase (LiP), laccase, manganese peroxidase (MnP), and dioxygenase were selected as candidate enzymes due to these oxidases existing in the fungi and capable of degrading the contaminants with similar structures of these compounds, and CuSO₄, NaN₃, AgNO₃, EDTA or piperonyl butoxide (PBO) were used as the enzymes inhibitors and inducers. The degradation of 3-PBA and its intermediate metabolites and the fungal biomass in presence of enzymes inhibitors and inducers was arranged to analyze the possible degrading-enzymes, and the co-metabolic enzymes and pathways can be reasoned. This study provided a promising method for studying the co-metabolic enzymes of 3-PBA degradation by fungi.

•

The presented MethodsX was conducted for co-metabolic enzymes and pathways of 3-PBA degradation.

•

The culturing condition for presenting enzyme properties were investigated.

•

The candidate enzymes were analyzing based on location, induction of enzymes, fungal enzyme systems and chemical structures of these compounds.

Applications of Microbial Laccases: Patent Review of the Past Decade (2009–2019)

There is a high number of well characterized, commercially available laccases with different redox potentials and low substrate specificity, which in turn makes them attractive for a vast array of biotechnological applications. Laccases operate as batteries, storing electrons from individual substrate oxidation reactions to reduce molecular oxygen, releasing water as the only by-product. Due to society’s increasing environmental awareness and the global intensification of bio-based economies, the biotechnological industry is also expanding. Enzymes such as laccases are seen as a better alternative for use in the wood, paper, textile, and food industries, and they are being applied as biocatalysts, biosensors, and biofuel cells. Almost 140 years from the first description of laccase, industrial implementations of these enzymes still remain scarce in comparison to their potential, which is mostly due to high production costs and the limited control of the enzymatic reaction side product(s). This review summarizes the laccase applications in the last decade, focusing on the published patents during this period.

Biocatalytic degradation/redefining "removal" fate of pharmaceutically active compounds and antibiotics in the aquatic environment

Recently, the increasing concentration and persistent appearance of antibiotics traces in the water streams are considered an issue of high concern. In this context, an array of antibiotics has been categorized as pollutants of emerging concern due to their complex and highly stable bioactivity, indiscriminate usage with ultimate release into water bodies, and notable persistence in environmental matrices. Moreover, antibiotics traces containing household sewage/drain waste and pharmaceutical wastewater effluents contain a range of bioactive/toxic organic compounds, inorganic salts, pharmaceutically-active ingredients, or a mixture of all, which possesses negative influences ranging from ecological pollution to damage biodiversity. Moreover, their uncontrolled and undesirable bioaccumulation also poses a potential threat to target and non-target organisms in the environment. Aiming to tackle this issue effectively, various detection, quantification, degradation, and redefining "removal" processes have been proposed and investigated based on physical, chemical, and biological strategies. Though both useful and side effects of antibiotics on humans and animals are usually investigated thoroughly following safety and toxicity measures, however, their direct or indirect environmental impacts are not well reviewed yet. Owing to the considerable research gap, the environmental perfectives of antibiotics traces and their effects on target and non-target populations have now become the topic of research interest. Based on literature evidence, over the past several years, numerous individual studies have been performed and published covering various aspects of antibiotics. However, a comprehensive compilation on enzyme-based degradation of antibiotics is still lacking and requires careful consideration. Hence, this review summarizes up-to-date literature on enzymes as biocatalytic systems, explicitly, free as well as immobilized forms and their effective exploitation for the degradation of various antibiotics traces and other pharmaceutically-active compounds present in the water bodies. It is further envisioned that the enzyme-based strategies, for antibiotics degradation or removal, discussed herein, will help readers for a better understanding of antibiotics persistence in the environment along with the associated risks and removal measures. In summary, the current research thrust presented in this review will additionally evoke researcher to engineer robust and sustainable processes to effectively remediate antibiotics-contaminated environmental matrices.

Anthropogenic contaminants of high concern: Existence in water resources and their adverse effects

Existence of anthropogenic contaminants (ACs) in different environmental matrices is a serious and unresolved concern. For instance, ACs from different sectors, such as industrial, agricultural, and pharmaceutical, are found in water bodies with considerable endocrine disruptors potency and can damage the biotic components of the environment. The continuous ACs exposure can cause cellular toxicity, apoptosis, genotoxicity, and alterations in sex ratios in human beings. Whereas, aquatic organisms show bioaccumulation, trophic chains, and biomagnification of ACs through different entry route. These problems have been found in many countries around the globe, making them a worldwide concern. ACs have been found in different environmental matrices, such as water reservoirs for human consumption, wastewater treatment plants (WWTPs), drinking water treatment plants (DWTPs), groundwaters, surface waters, rivers, and seas, which demonstrate their free movement within the environment in an uncontrolled manner. This work provides a detailed overview of ACs occurrence in water bodies along with their toxicological effect on living organisms. The literature data reported between 2017 and 2018 is compiled following inclusion-exclusion criteria, and the obtained information was mapped as per type and source of ACs. The most important ACs are pharmaceuticals (diclofenac, ibuprofen, naproxen, ofloxacin, acetaminophen, progesterone ranitidine, and testosterone), agricultural products or pesticides (atrazine, carbendazim, fipronil), narcotics and illegal drugs (amphetamines, cocaine, and benzoylecgonine), food industry derivatives (bisphenol A, and caffeine), and personal care products (triclosan, and other related surfactants). Considering this threatening issue, robust detection and removal strategies must be considered in the design of WWTPs and DWTPs.

Persistence and impact of steroidal estrogens on the environment and their laccase-assisted removal

Steroidal estrogens are widespread water contaminants with potential carcinogenic and endocrine-disrupting activities. The World Health Organization has listed estrogens as group 1 carcinogens. These contaminants are of substantial concern because of potential threats to human health, and aquatic organisms on long-term exposure. A range of methods, including oxidation, adsorption, electrochemical, and irradiation techniques have been employed for their remediation from aqueous systems. However, inadequate removal, toxic sludge generation, high operating costs, and the requisite for skilled operating and maintenance personnel commercially hampered the application of many methods. An interesting alternative treatment approach based on the use of oxidoreductases, particularly laccases, has recently gained amicability for the biotransformation of emerging pollutants. The use of immobilized enzymes is more cost-effective from an industrial perspective due to improved catalytic stability, reusability, reduction of product inhibition, and easier product separation. This review provides comprehensive knowledge on the use of laccases in the biodegradation of steroidal estrogens, including estrone, 17β-estradiol, and 17α-ethinylestradiol with endocrine-disrupting potency from the environment. After an overview of estrogens and catalytic properties of laccase, the use of free, as well as immobilized laccases with a particular emphasis on estrogens removal by laccase-based fed-batch, packed bed bioreactors, and membrane reactors, is discussed. A comparison of existing treatment technologies with enzyme technology for the removal of estrogens from different environmental matrices is made. Lastly, along with concluding remarks, future research direction aimed at bridging knowledge gaps for estrogenic compounds removal are also proposed in this very important research area.

Cultivation of a versatile manganese-oxidizing aerobic granular sludge for removal of organic micropollutants from wastewater

Organic micropollutants (OMPs) are frequently detected in water and wastewater, and have attracted wide attention due to potential adverse effects on ecosystems and human health. In this work, manganese-oxidizing aerobic granular sludge (Mn-AGS) was successfully cultivated and applied to remove OMPs from wastewater. Biogenic manganese (III,IV) oxides (bio-MnO_x) were generated and accumulated to 22.0-28.3 mg Mn/g SS in the final sludge. Neither the addition of allochthonous manganese-oxidizing bacteria (MnOB; Pseudomonas putida MnB1) nor the reduction in hydraulic retention time (HRT) facilitated the cultivation of Mn-AGS. Batch experiments of OMPs degradation indicated that Mn-AGS significantly improved (1.3-3.9 times) degradation rates of most OMPs. Removal rates of bisphenol A (BPA), 17α‑ethinylestradiol (EE2), tetracycline (TC), and chloramphenicol (CAP) were 3.0-12.6 μg/h/g SS by the traditional AGS and 8.0-16.3 μg/h/g SS by Mn-AGS; those of imazethapyr (IM) were relatively high, 64.7 ± 0.1 and 127.8 ± 2.5 μg/h/g SS by AGS and Mn-AGS, respectively. However, degradation of dichlorophenyl phosphine (DCPP) was slower by Mn-AGS than AGS, 9.0 ± 0.4 vs. 21.2 ± 0.9 μg/h/g SS, possibly due to inhibition of microbial activity by bio-MnO_x. This work provides a promising method for treating OMPs in organic wastewater, but the possible inhibition of microbes by bio-MnO_x should be noted.

Mitigation of bisphenol A using an array of laccase-based robust bio-catalytic cues - A review

Bisphenol A (BPA) is a known endocrine disruptor that poses concerning environmental and human-health related issues and ecological risks. It has been largely used as an intermediate in the manufacture of epoxy resins and polycarbonate plastics. Traces of BPA can reach into the environment through inadequate or inefficient removal during wastewater treatment, uncontrolled landfill leachates, and leaching out from the discarded BPA-based materials. Several physicochemical treatment methods including adsorption, Fenton, ozonation, electrochemical and photochemical degradation, and membrane filtration, have been applied for BPA elimination. However, these methods are not adequate for large-scale treatment due to some inherent limitations. Benefiting from high catalytic efficiency and specificity, enzyme-based bio-catalytic degradation strategies are considered quite meaningful alternative for efficient and effective BPA removal from different routes. Among various oxidoreductases, i.e., laccases exhibited a superior potential for the remediation of BPA-containing wastewater. Enzymatic oxidation of BPA can be boosted by using various natural or synthetic redox mediators. Immobilized enzymes can expand their applicability to continuous bioprocessing and facilitates process intensification. Therefore, optimized formulations of insolubilized biocatalysts are of strategic interest in the environmental biotechnology. In this review, recent research studies dealing with BPA removal by the laccase-catalyzed system are presented. At first, the presence of BPA in the ecosystem, sources, exposure, and its impact on the living organisms and human beings is summarized. Then, we highlighted the use of crude as well as immobilized laccases for the degradation of BPA. In addition to toxicity and estrogenicity removal studies, the unresolved challenges, concluding remarks, and possible future direction is proposed in this important research area. It is palpable from the literature reviewed that free as well as immobilized forms of laccases have displayed noteworthy potential for BPA removal from wastewater.

Enzymatic degradation and detoxification of azo dye Congo red by a new laccase from Oudemansiella canarii

A single laccase with molecular weight of 41 kDa was produced by the white-rot fungus Oudemansiella canarii cultured on solid state fermentation using a mixture of sugarcane bagasse-wheat bran as substrate. The enzyme (5 U) was able to decolourize 80% of 50 mg/L Congo red within 24 h at 30 °C and pH 5.5. The relationship between the decolorization rate and dye concentration obeyed Michaelis-Menten kinetics, with K_M and V_max values of 46.180 ± 6.245 µM and 1.840 ± 0.101 µmol/min, respectively. Fourier transform infrared spectroscopy (FTIR) and mass spectrometry allowed to conclude that the laccase acts not only on the dye chromophore group, but also that it cleaves different covalent bonds, causing an effective fragmentation of the molecule. The action of the laccase caused a significant reduction in toxicity, as indicated by the Microtox test. In conclusion, O. canarii laccase could be useful in future biological strategies aiming at degrading azo dyes.

Biodegradation of methyl and butylparaben by bacterial strains isolated from amended and non-amended agricultural soil. Identification, behavior and enzyme activities of microorganisms

The aim of the present study was to investigate the kinetics of methylparaben (MPB) and butylparaben (BPB) removal, two emerging pollutants with possible endocrine disrupting effects, from agricultural soil with and without amendment with compost from sewage sludge used as biostimulant. Compound removal is explained by a first-order kinetic model with half-life times of 6.5/6.7 days and 11.4/8.2 days, in presence/absence of compost, for MPB and BPB respectively. % R² for the fitted model were higher than 96% in all cases. Additionally, isolation of bacteria capable to grow using MPB or BPB as carbon source was also carry out. Laboratory tests demonstrated the ability of these bacteria to biodegrade MPB and BPB from culture media in more than 95% in some cases. These strains showed high ability to biodegrade the compounds. Ten isolates, most of them related to Gram positive bacteria of the genus Bacillus, were identified by 16S rRNA gene sequencing. The study of the enzymatic activities of the isolates revealed both esterase (C4) and esterase-lipase activities.

Characterization of enzyme-immobilized catalytic support and its exploitation for the degradation of methoxychlor in simulated polluted soils

Chiral mesoporous silica (SiO₂) with helical structure was synthesized by using anionic surfactants as template. Pre-prepared graphene oxide (GO) was then loaded onto SiO₂ to synthesize composite carrier chial-meso-SiO₂@GO for the immobilization of laccase. The enzyme activity, thermostability, acid stability, and repeatability of the immobilized enzyme were significantly improved after immobilization. The chial-meso-SiO₂@GO-immobilized laccase was then used for the degradation of MXC in aqueous phase. The degradation conditions, including temperature, time, pH, MXC concentration, and the dose of immobilized enzyme for cellulosic hydrolysis, were optimized. The optimum conditions for degradation of methoxychlor were selected as pH 4.5, MXC concentration 30 mg/L, immobilized enzyme dose 0.1 g, the maximum MXC removal of over 85% and the maximum degradation rate of 50.75% were achieved after degradation time of six h at temperature of 45 °C. In addition, the immobilized cellulase was added into the immobilized laccase system to form chial-meso-SiO₂@GO-immobilized compound enzyme with the maximum MXC degradation rate of 59.58%, higher than that of 50.75% by immobilized laccase. An assessment was made for the effect of chial-meso-SiO₂@GO-immobilized compound enzyme on the degradation of MXC in soil phase. For three contaminated soils with MXC concentration of 25 mg/kg, 50 mg/kg, and 100 mg/kg, the MXC removals were 93.0%, 85.8%, and 65.1%, respectively. According to the GC-MS analyses, it was inferred that chial-meso-SiO₂@GO-immobilized compound enzyme had a different degradation route with that of chial-meso-SiO₂@GO-immobilized laccase. The hydrolysis by immobilized cellulase might attack at a weak location of the MXC molecule with its free radical OH and ultimately removed three chlorine atoms from MXC molecule, leading to generating small molecular amount of degradation product.

Modeling of adsorption of Methylene Blue dye on Ho-CaWO4 nanoparticles using Response Surface Methodology (RSM) and Artificial Neural Network (ANN) techniques

The aim of this study is to evaluate the applicability of Ho-CaWO₄ nanoparticles prepared using the hydrothermal method for the removal of Methylene Blue (MB) from aqueous solution using adsorption process. The effects of contact time, Ho-CaWO₄ nanoparticles dose and initial MB concentration on the removal of MB were studied using the central composite design (CCD) method. Response Surface Methodology (RSM) and Artificial Neural Network (ANN) modeling techniques were applied to model the process and their performance and predictive capabilities of the response (removal efficiency) was also examined. The adsorption process was optimized using the RSM and the optimum conditions were determined. The process was also modelled using the adsorption isotherm and kinetic models. The ANN and RSM model showed adequate prediction of the response, with absolute average deviation (AAD) of 0.001 and 0.320 and root mean squared error (RMSE) of 0.119 and 0.993, respectively. The RSM model was found to be more acceptable since it has the lowest RMSE and AAD compared to the ANN model. Optimum MB removal of 71.17% was obtained at pH of 2.03, contact time of 15.16 min, Ho-CaWO₄ nanoparticles dose of 1.91 g/L, and MB concentration of 100.65 mg/L. Maximum adsorption capacity (q_m ) of 103.09 mg/g was obtained. The experimental data of MB adsorption on Ho-CaWO₄ nanoparticles followed the Freundlich isotherm and pseudo-second-order kinetic models than the other models. It could be concluded that the prepared Ho-CaWO₄ nanoparticles can be used efficiently for the removal of MB and also, the process can be optimized to maximize the removal of MB. •Synthesis and characterization of Ho-CaWO₄ nanoparticles.•Modelling and optimization of Methylene Blue removal onto Ho-CaWO₄ using Response Surface Methodology (RSM) and Artificial neural network (ANN).•Evaluation of the isotherm and kinetic parameters of the adsorption process.

Evaluation of laccase production by Ganoderma lucidum in submerged and solid-state fermentation using different inducers

Laccases are multicopper oxidases with high potential for industrial applications. Several basidiomycete fungi are natural producers of this enzyme; however, the optimization of production and selection of inducers for increased productivity coupled with low costs is necessary. Lignocellulosic residues are important lignin sources and potential inducers for laccase production. Pinus taeda, a dominant source of wood-based products, has not been investigated for this purpose yet. The aim of this study was to evaluate the production of laccase by the basidiomycete fungus Ganoderma lucidum in the presence of different inducers in submerged and solid-state fermentation. The results of submerged fermentation in presence of 5 μM CuSO ₄ , 2 mM ferulic acid, 0.1 g/L P. taeda sawdust, or 0.05 g/L Kraft lignin indicated that although all the tested inducers promoted increase in laccase activity in specific periods of time, the presence of 2 mM ferulic acid resulted in the highest value of laccase activity (49 U/L). Considering the submerged fermentation, experimental design following the Plackett-Burman method showed that the concentrations of ferulic acid and P. taeda sawdust had a significant influence on the laccase activity. The highest value of 785 U/L of laccase activity on submerged fermentation was obtained on the seventh day of cultivation. Finally, solid-state fermentation cultures in P. taeda using ferulic acid or CuSO ₄ as inducers resulted in enzymatic activities of 144.62 and 149.89 U/g, respectively, confirming the potential of this approach for laccase production by G. lucidum.

Environmental perspectives of interfacially active and magnetically recoverable composite materials - A review

Aquatic ecosystem contaminated with toxic pollutants and heavy metals due to the rapid growth of industrialization has become a top-priority global concern exhibiting highly adverse effects on human health and the environment. Many treatment techniques have been envisioned for the removal of these toxic contaminants from the aqueous environment. Among these techniques, magnetic separation has attracted burgeoning research attention owing to its simplicity, eco-friendly nature, large surface area, electron mobility, and excellent performance for removing water contaminants. In particular, interfacial active nanoparticles and nanocomposites with unique structures and magnetic properties are considered as ideal provides candidates in material science for next-generation water treatment. This review gives an insight into current research activities associated with the synthesis strategies and applications of interfacially active and magnetically responsive nanomaterials and nanocomposites for sustainable purification processes. In the first half, various synthesis routes for magnetic iron oxide nanoparticles development and the corresponding formation mechanism are summarized. In the second half, we reviewed the magnetic and wettability properties of interfacially active and magnetically responsive nanocomposites and their environmental applications including oil-water separation, removal of hazardous dye-based pollutants and potentially toxic heavy metals. Finally, the review is wrapped up with major concluding remarks and future perspectives of these magnetic nanoscale composite materials for sustainable wastewater remediation.

Designing and modeling of a novel electrolysis reactor using porous cathode to produce H2O2 as an oxidant

The entry of toxic organic pollutants and resistant to biodegradation has increased the concern about human health. The use of advanced oxidation (AO) processes to degrade these pollutants has been developing. One of the AO processes is based on the use of hydrogen peroxide in removing resistant organic pollutants.

This study aimed to develop a new reactor capable of producing H₂O₂ in the solution. Therefore, a porous electrode made of stainless steel with the capability of air injection in the electrode center was used. The 30 cm rod graphite electrodes were also used as an anode electrode in a 4000 ml reactor. The effects of variables, including current density (30–40 mA/cm²), time (10–30 min), and electrolyte concentration (12–17 mM/L) on the amount of H₂O₂ production were evaluated by Box behenken design under response surface methodology using Design expert software. The results of this study showed that H₂O₂ can be produced at the electrode surface of porous cathode under optimal conditions of 36 mA/cm² current density, 16 mM/l electrolyte concentration, in 23 min, and in the amount of 34 ppm. Using a porous cathode electrode causes the maximum contact among the solution, water, and air, and increases the production of H₂O₂.

The release of resistant organic compounds to the waste water is a serious problem to the environment. By the application of the Electro-oxidation (EO)reactor with the ability to produce H₂O₂, this issue is resolved. Furthermore, this technique is applied for non-selective degradation of the toxic organic compounds.

•

The electro-oxidation process is a useful method for destruction of persistent organic matter from wastewater.

•

Due to use of porous cathode in this method, contact between the electrode and the sewage is at its maximum level which increases the efficiency and speed of sewage treatment.

•

This method can produce H₂O₂ as a high potential oxidant that can reduce persistent organic properties of sewage and make the wastewater suitable for biological treatment.

Mitigation of environmental pollution by genetically engineered bacteria - Current challenges and future perspectives

Industries are the paramount driving force for the economic and technological development of society. However, the flourishing industrialization and unimpeded growth of current production unit's result in widespread environmental pollution due to increased discharge of wastes loaded with baleful, hazardous, and carcinogenic contaminants. Physicochemical-based remediation means are costly, create a secondary disposal problem and remain inadequate for pollution mitigating because of the continuous emergence of new recalcitrant pollutants. Due to eco-friendly, social acceptance, and lesser health hazards, microbial bioremediation has received considerable global attention for pollution abatement. Moreover, with the recent advancement in biotechnology and microbiology, genetically engineered bacteria with high ability to remove environmental pollutants are widely used in the fields of environmental restoration, resulting in the bioremediation in a more viable and eco-friendly way. This review summarized the advantages of genetically engineered bacteria and their application in the treatment of a wide variety of environmental contaminants such as synthetic dyestuff, heavy metal, petroleum hydrocarbons, polychlorinated biphenyls, phenazines and agricultural chemicals which will include herbicides, pesticides, and fertilizers. Considering the risk of genetic material exchange by using genetically engineered bacteria, the challenges and limitations associated with the application of recombinant bacteria on contaminated sites are also discussed. An integrated microbiological, biological and ecological acquaintance accompanied by field engineering designs are the desired features for effective in situ bioremediation of hazardous waste polluted sites by recombinant bacteria.

Laccase-immobilized tannic acid-mediated surface modification of halloysite nanotubes for efficient bisphenol-A degradation

Halloysite nanotubes (HNTs) have been pursued as promising carriers for enzyme immobilization, but the lack of functional groups severely limits their applications. Herein, we reported a simple tannic acid (TA)-mediated surface modification strategy for the fabrication of HNT-based efficient enzyme immobilization supports. Particularly, TA was first self-polymerized and deposited onto the surface of HNTs to form a thin active film via a mussel-inspired method, and the model enzyme laccase was directly conjugated via the Michael addition and/or Schiff base condensation between quinone groups on poly(tannic acid) layer surfaces and exposed amine groups on laccase surfaces. Under the optimum conditions, this newly fabricated support retained good enzyme-loading and activity recovery properties with 197.9 mg protein per gram of support and 55.4% of activity recovery being achieved. In addition, this immobilized laccase was less influenced by pH, temperature, and inhibitor changes and exhibited higher storage stability than free laccases as more than 70% of initial activity was retained by the immobilized laccase, while less than 30% was retained for free laccase after one-month storage at 4 °C. Finally, a higher bisphenol-A (BPA) removal efficiency and more reuse cycles were demonstrated for immobilized laccases. As a result, this TA-mediated surface modification is a simple and green method for biological macromolecule immobilization on HNTs in one step.

We report a simple tannic acid (TA)-mediated surface modification strategy for the fabrication of HNT-based efficient enzyme immobilization supports.