Biocompatible polymer materials: Role of protein–surface interactions

End Point Versus Backbone Specificity Governs Characteristics of Antibody Binding to Poly(ethylene glycol) Brushes

End-grafted poly(ethylene glycol) (PEG) brushes are widely used in order to suppress undesired protein adsorption to surfaces exposed to blood or other biological fluids. The specific adsorption of antibodies (Abs) to PEG brushes associated with PEG's antigenicity is drawing increasing attention because it can affect clinical applications. Here, the adsorption to PEG brushes of two Ab types, specifically binding the polymer backbone and the polymer endpoints, is structurally characterized by neutron reflectometry. The measurements yield volume fraction profiles of PEG and of the adsorbed Abs with sub-nanometer resolution perpendicular to the surface. For all brush parameters in terms of grafting density and polymerization degree, the Ab profiles clearly differ between backbone binders and endpoint binders. The adsorbed Ab amount per unit area is substantial for both Ab types and for all brush parameters investigated, even for dense brushes, which impose a considerable osmotic barrier to Ab insertion. The results therefore indicate that variation of brush parameters alone is insufficient to prevent undesired Ab adsorption. Instead, our work motivates further efforts in the search for nonantigenic brush chemistry.

Analysis of Interaction Between Interfacial Structure and Fibrinogen at Blood-Compatible Polymer/Water Interface

The correlation between the interfacial structure and protein adsorption at a polymer/water interface was investigated. Poly(2-methoxyethyl acrylate)(PMEA), which is one of the best blood compatible polymers available, was employed. Nanometer-scale structures generated through the phase separation of polymer and water were observed at the PMEA/phosphate buffered saline interface. The interaction between the interfacial structures and fibrinogen (FNG) was measured using atomic force microscopy. Attraction was observed in the polymer-rich domains as well as in the non-blood compatible polymer. In contrast, no attractive interactions were observed, and only a repulsion occurred in the water-rich domains. The non-adsorption of FNG into the water rich domains was also clarified through topographic and phase image analyses. Furthermore, the FNG molecules adsorbed on the surface of PMEA were easily desorbed, even in the polymer-rich domains. Water molecules in the water-rich domains are anticipated to be the dominant factor in preventing FNG adsorption and thrombogenesis on a PMEA interface.

Interactions Between Biological Products and Product Packaging and Potential Approaches to Overcome Them

Biological products such as protein-based biopharmaceuticals are playing an important role in the healthcare and pharmaceutical industry. The interaction between biological products and packaging materials has become the focus of many studies since it can reduce the effectiveness of biological products. These interactions are heavily influenced by the surface properties and physicochemical nature of the therapeutic agents and the packaging materials. Therefore, it is critical to understand the interactions between packaging materials and biological products in order to design biocompatible packaging materials and develop approaches to minimize adverse interactions. We describe the interactions that occur when using several common packaging materials, including glass and polymer. We discuss the interaction between these materials and biological products such as blood, blood derivatives, recombinant proteins, monoclonal antibodies, and gene therapeutics. We also summarize approaches for overcoming these interactions. Understanding the interactions between biological materials and packaging materials is critical for the development of novel packaging materials that improve the safety of pharmaceutical products.

Biodegradable Anisotropic Microparticles for Stepwise Cell Adhesion and Preparation of Janus Cell Microparticles

The biomimetic anisotropic particles have different physicochemical properties on the opposite two sides, enabling diverse applications in emulsion, photonic display, and diagnosis. However, the traditional anisotropic particles have a very small size, ranging from submicrons to a few microns. The design and fabrication of anisotropic macron-sized particles with new structures and properties is still challenging. In this study, anisotropic polycaprolactone (PCL) microparticles well separated with each other were prepared by crystallization from the dilute PCL solution in a porous 3D gelatin template. They had fuzzy and smooth surfaces on each side, and a size as large as 70 μm. The fuzzy surface of the particle adsorbed significantly larger amount of proteins, and was more cell-attractive regardless of the cell types. The particles showed stronger affinity toward fibroblasts over hepatocytes, which paved a new way for cell isolation merely based on the surface morphology. After a successive seeding process, Janus cell microparticles with fibroblasts and endothelial cells (ECs) on each side were designed and obtained by making use of the anisotropic surface morphology, which showed significant difference in EC functions in terms of prostacyclin (PGl2) secretion, demonstrating the unique and appealing functions of this type of anisotropic microspheres.

Surface-Restructuring Differences between Polyrotaxanes and Random Copolymers in Aqueous Environment

In the present study, we investigated the surface reorganization behaviors and adsorption conformations of fibrinogen on the surface of polyrotaxanes containing different amounts of α-cyclodextrin (α-CD) by using surface-sensitive vibrational spectroscopy sum frequency generation (SFG). For comparison, behaviors of the surface restructuring and fibrinogen adsorption on the random copolymers containing similar terminal groups were also investigated. It was found that larger amounts of BMA moieties of polyrotaxanes form ordered surface structures after immersion in water for 48 h. Furthermore, the polyrotaxane surfaces exhibit a much higher capability of fibrinogen adsorption than the random copolymer surfaces. The water-induced surface restructuring of the polyrotaxane films slightly affects the adsorption structure of the fibrinogen molecules.

Antifouling amphiphilic silicone coatings for dairy fouling mitigation on stainless steel

Pasteurization of dairy products is plagued by fouling, which induces significant economic, environmental and microbiological safety concerns. Herein, an amphiphilic silicone coating was evaluated for its efficacy against fouling by a model dairy fluid in a pilot pasteurizer and against foodborne bacterial adhesion. The coating was formed by modifying an RTV silicone with a PEO-silane amphiphile comprised of a PEO segment and flexible siloxane tether ([(EtO)₃Si-(CH₂)₂-oligodimethylsiloxane_m-block-(OCH₂CH₂)_n-OCH₃]). Contact angle analysis of the coating revealed that the PEO segments were able to migrate to the aqueous interface. The PEO-modified silicone coating applied to pretreated stainless steel was exceptionally resistant to fouling. After five cycles of pasteurization, these coated substrata were subjected to a standard clean-in-place process and exhibited a minor reduction in fouling resistance in subsequent tests. However, the lack of fouling prior to cleaning indicates that harsh cleaning is not necessary. PEO-modified silicone coatings also showed exceptional resistance to adhesion by foodborne pathogenic bacteria.

Introducing multiple bio-functional groups on the poly(ether sulfone) membrane substrate to fabricate an effective antithrombotic bio-interface

It has been widely recognized that functional groups on biomaterial surfaces play important roles in blood compatibility. To construct an effective antithrombotic bio-interface onto the poly(ether sulfone) (PES) membrane surface, bio-functional groups of sodium carboxylic (-COONa), sodium sulfonic (-SO₃Na) and amino (-NH₂) groups were introduced onto the PES membrane surface in three steps: the synthesis of PES with carboxylic (-COOH) groups (CPES) and water-soluble PES with sodium sulfonic (-SO₃Na) groups and amino (-NH₂) groups (SNPES); the introduction of carboxylic groups onto the PES membrane by blending CPES with PES; and the grafting of SNPES onto CPES/PES membranes via the coupling of amino groups and carboxyl groups. The physical/chemical properties and bioactivities were dependent on the proportions of the additives. After introducing bio-functional groups, the excellent hemocompatibility of the modified membranes was confirmed by the inhibited platelet adhesion and activation, prolonged clotting times, suppressed blood-related complement and leukocyte-related complement receptor activations. Furthermore, cell tests indicated that the modified membranes showed better cytocompatibility in endothelial cell proliferation than the pristine PES membrane due to the synergistic promotion of the functional groups. To sum up, these results suggested that modified membranes present great potential in fields using blood-contacting materials, such as hemodialysis and surface endothelialization.

Collagen/chitosan/hyaluronic acid - based injectable hydrogels for tissue engineering applications - design, physicochemical and biological characterization

Studies on synthesis, physico-chemical and biological properties of novel biomimetic materials, potentially useful as injectable hydrogels are presented. These materials are in situ prepared chemically crosslinked collagen/chitosan/hyaluronic acid-based hydrogels exhibiting potential for tissue regeneration. Optimization of hydrogels involved testing the effect of various concentration of crosslinking agent (genipin) as well as different ratios of biopolymers used on their properties. The changes in the content of hyaluronic acid and in the genipin concentration used have been shown to be crucial. Employing the highest concentration of crosslinking agent studied (20 mM) the hydrogels of compact structure, characterized by good mechanical properties and prolonged degradation profile can be obtained. Changing the HA content in sol mixture the hydrogel of various wettability; more or less hydrophilic when compared to pure collagen/chitosan hydrogels can be fabricated. The in vitro cell culture study has shown that the surface of the prepared materials ensures suitable biocompatibility. These hydrogels can support the proliferation and adhesion of MG-63 cell line as it was demonstrated using Alamar Blue assay and SEM observations. It is believed that the collagen/chitosan/hyaluronic acid hydrogels crosslinked with genipin are particularly promising materials for bone regeneration procedures, especially attractive for regeneration of small bone losses. This is the first paper in the litearature presenting results of studies on that type of biopolymeric injectable hydrogels chemically crosslinked with genipin.

Platinum(IV) complex-based two-in-one polyprodrug for a combinatorial chemo-photodynamic therapy

A combinatorial therapy that utilizes two or more therapeutic modalities is more effective in overcoming the limitations than each individual method used alone. Despite great advances have been achieved, the combination of chemotherapy and photodynamic therapy (PDT) still cannot satisfy the clinic requirements as the antitumor efficacy could be severely affected by tumor-associated hypoxia. Herein, for the first time, we reported a platinum(IV) complex-based polyprodrug that can in situ generate the highly toxic platinum(II) species as chemotherapeutics and simultaneously induce a high level of reactive oxygen species (ROS) in a PDT-like process without the use of photosensitizer and consumption of oxygen. By in situ polymerizing the platinum(IV) complex-based prodrug monomer (PPM) and 2-methacryloyloxy ethyl phosphorylcholine (MPC), nanosized hydrogel-like polyprodrug could be synthesized. Upon being exposed to light, Pt(IV) moieties in this photoactivable polyprodrug were reduced to generate Pt(II) species. At the meantime, a high level of ROS was generated without the presence of endogenous oxygen, which was confirmed by electron spin resonance (ESR) and fluorescence probes. With the unique nanosized architecture and photoresponsive feature, the as-synthesized polyprodrug exhibited the advantages of sustained drug release, long-term circulation, preferable tumor accumulation, and reversing drug resistance by downregulating the expression of multidrug resistance-associated protein 1 (MRP1) in the anticancer treatment.

Self-Assembly Behavior and pH-Stimuli-Responsive Property of POSS-Based Amphiphilic Block Copolymers in Solution

Stimuli-responsive polymeric systems containing special responsive moieties can undergo alteration of chemical structures and physical properties in response to external stimulus. We synthesized a hybrid amphiphilic block copolymer containing methoxy polyethylene glycol (MePEG), methacrylate isobutyl polyhedral oligomeric silsesquioxane (MAPOSS) and 2-(diisopropylamino)ethyl methacrylate (DPA) named MePEG-b-P(MAPOSS-co-DPA) via atom transfer radical polymerization (ATRP). Spherical micelles with a core-shell structure were obtained by a self-assembly process based on MePEG-b-P(MAPOSS-co-DPA), which showed a pH-responsive property. The influence of hydrophobic chain length on the self-assembly behavior was also studied. The pyrene release properties of micelles and their ability of antifouling were further studied.

Extraction of the Polyurethane Layer in Textile Composites for Textronics Applications Using Optical Coherence Tomography

This article presents a new method for the extraction and measurement of the polyurethane layer of Cordura textile composites using optical coherence tomography. The knowledge of coating layer properties in these composites is very important, as it affects mechanical parameters such as stiffness and bending rigidity. Unlike microscopic measurements, which require cross-section samples of the material, the proposed approach is non-invasive. The method is based on detecting the top and bottom boundaries of the polyurethane layer in Optical Coherence Tomography (OCT) images using image processing methods, namely edge enhancement filtering, thresholding and spline smoothing. The cover layer measurement results obtained from a three-dimensional OCT image of the composite fabric are presented as the thickness maps. The average values of the layer thicknesses measured with the OCT method for four types of Cordura showed a high correlation with the results obtained from microscopic measurements (Pearson correlation coefficient r = 0.9844 ), which confirms the accuracy of the OCT method.

A facile method to prepare a versatile surface coating with fibrinolytic activity, vascular cell selectivity and antibacterial properties

Clot and thrombus formation on surfaces that come into contact with blood is still the most serious problem for blood contacting devices. Despite many years of continuous efforts in developing hemocompatible materials, it is still of great interest to develop multifunctional materials to enable vascular cell selectivity (to favor rapid endothelialization while inhibiting smooth muscle cell proliferation) and improve hemocompatibility. In addition, biomaterial-associated infections also cause the failure of biomedical implants and devices. However, it remains a challenging task to design materials that are multifunctional, since one of their functions will usually be compromised by the introduction of another function. In the present work, the gold substrate was first layer-by-layer (LbL) deposited with a multilayered polyelectrolyte film containing chitosan (positively charged) and a copolymer of sodium 4-vinylbenzenesulfonate (SS) and the "guest" adamantane monomer 1-adamantan-1-ylmethyl methacrylate (P(SS-co-Ada), negatively charged) via electro-static interactions, referred to as Au-LbL. The chitosan and P(SS-co-Ada) were intended to provide, respectively, resistance to bacteria and heparin-like properties. Then, "host" β-cyclodextrin derivatives bearing seven lysine ligands (CD-L) were immobilized on the Au-LbL surface by host-guest interactions between adamantane residues and CD-L, referred to as Au-LbL/CD-L. Finally, a versatile surface coating with fibrinolytic activity (lysis of nascent clots), vascular cell selectivity and antibacterial properties was developed.

Bio-inspired microcapsule for targeted antithrombotic drug delivery

Thrombosis or embolism is the leading cause of death and long-term adult disability worldwide. To reduce the risk of thrombosis and hemorrhaging in patients, a facile and versatile method was developed to fabricate microcapsules for targeted antithrombotic drug delivery. The microcapsules were prepared via oxidative polymerization of dopamine on polystyrene microspheres, followed by immobilization of fibrinogen onto the surface of poly(dopamine) layers. Subsequently, microcapsules were obtained by removing the cores with THF. Nattokinase was loaded into the microcapsules via diffusion. The loading amount was approximately 0.05 mg g⁻¹ at 37 °C, and the loading efficiency was nearly 75%, based on the initial concentration of nattokinase in PBS. The release of nattokinase was a gradual process at 37 °C, and the activity of the targeted activated platelets was highly efficient. The antithrombotic activity of the nattokinase microcapsules was evidenced by the sharp dissolution of fibrin clots and the blood clotting time indexes. A gradual release mechanism of platelet-inspired microcapsules used for targeted antithrombotic therapy was proposed. This strategy for targeted antithrombotic drug delivery, which lowers the demand dose and minimizes side effects while maximizing drug efficacy, provides a potential new way to treat life-threatening diseases caused by vascular disruption.

NK-loaded hollow microcapsules were fabricated and assessed as a potential antithrombosis therapy.

“Click-chemical” modification of cellulose acetate nanofibers: a versatile platform for biofunctionalization

We demonstrated a platform for the biofunctionalization of cellulose acetate nanofibers using a new type of click chemistry, namely “sulfur(vi)–fluoride exchange reaction”.

Dopamine assisted PMOXA/PAA brushes for their switchable protein adsorption/desorption

PMOXA/PAA mixed brushes with switchable protein adsorption/desorption properties were prepared by sequentially grafting PMOXA-NH₂ and PAA-SH onto PDA-coated substrates.

Biocompatibility of polymer-based biomaterials and medical devices – regulations,in vitroscreening and risk-management

Biomaterials play an increasing role in modern health care systems.

Tumor-Targeted Accumulation of Ligand-Installed Polymeric Micelles Influenced by Surface PEGylation Crowdedness

With respect to the intriguing biocompatibility and the stealthy functions of poly(ethylene glycol) (PEG), PEGylated nanoparticulates have been intensively engineered for utilities as drug delivery vehicles. To advocate the targeted drug transportation, targeting ligands were strategically installed onto the surface of PEGylated nanoparticulates. The previous in vitro investigations revealed that the ligand-specified cell endocytosis of nanoparticulates was pronounced for the nanoparticulates with adequately high PEG crowdedness. The present study aims to explore insight into the impact of PEGylation degree on in vivo tumor-targeted accumulation activities of cRGD-installed nanoparticulates. The subsequent investigations verified the importance of the PEGylation crowdedness in pursuit of prolonged retention in the blood circulation post intravenous administration. Unprecedentedly, the PEGylation crowdedness was also identified as a crucial important parameter to pursue the tumor-targeted accumulation. A plausible reason is the elevated PEGylation crowdedness eliciting the restricted involvement in nonspecific protein adsorption of nanoparticulates in the biological milieu and consequently pronouncing the ligand-receptor-mediated binding for the nanoparticulates. Noteworthy was the distinctive performance of the class of the proposed systems once utilized for transportation of the mRNA payload to the tumors. The protein expression in the targeted tumors appeared to follow a clear PEGylation crowdedness dependence manner, where merely 2-fold PEGylation crowdedness led to remarkably 10-fold augmentation in protein expression in tumors. Hence, the results provided important information and implications for design of active-targeting PEGylated nanomaterials to fulfill the targeting strategies in systemic applications.

Mechanochemistry of Chitosan-Coated Zinc Sulfide (ZnS) Nanocrystals for Bio-imaging Applications

The ZnS nanocrystals were prepared in chitosan solution (0.1 wt.%) using a wet ultra-fine milling. The obtained suspension was stable and reached high value of zeta potential (+57 mV). The changes in FTIR spectrum confirmed the successful surface coating of ZnS nanoparticles by chitosan. The prepared ZnS nanocrystals possessed interesting optical properties verified in vitro. Four cancer cells were selected (CaCo-2, HCT116, HeLa, and MCF-7), and after their treatment with the nanosuspension, the distribution of ZnS in the cells was studied using a fluorescence microscope. The particles were clearly seen; they passed through the cell membrane and accumulated in cytosol. The biological activity of the cells was not influenced by nanoparticles, they did not cause cell death, and only the granularity of cells was increased as a consequence of cellular uptake. These results confirm the potential of ZnS nanocrystals using in bio-imaging applications.

Neutron Reflectometry Elucidates Protein Adsorption from Human Blood Serum onto PEG Brushes

Poly(ethylene glycol) (PEG) brushes are reputed for their ability to prevent undesired protein adsorption to material surfaces exposed to biological fluids. Here, protein adsorption out of human blood serum onto PEG brushes anchored to solid-supported lipid monolayers was characterized by neutron reflectometry, yielding volume fraction profiles of lipid headgroups, PEG, and adsorbed proteins at subnanometer resolution. For both PEGylated and non-PEGylated lipid surfaces, serum proteins adsorb as a thin layer of approximately 10 Å, overlapping with the headgroup region. This layer corresponds to primary adsorption at the grafting surface and resists rinsing. A second diffuse protein layer overlaps with the periphery of the PEG brush and is attributed to ternary adsorption due to protein-PEG attraction. This second layer disappears upon rinsing, thus providing a first observation of the structural effect of rinsing on protein adsorption to PEG brushes.

3D Printing of Photocurable Cellulose Nanocrystal Composite for Fabrication of Complex Architectures via Stereolithography

The advantages of 3D printing on cost, speed, accuracy, and flexibility have attracted several new applications in various industries especially in the field of medicine where customized solutions are highly demanded. Although this modern fabrication technique offers several benefits, it also poses critical challenges in materials development suitable for industry use. Proliferation of polymers in biomedical application has been severely limited by their inherently weak mechanical properties despite their other excellent attributes. Earlier works on 3D printing of polymers focus mainly on biocompatibility and cellular viability and lack a close attention to produce robust specimens. Prized for superior mechanical strength and inherent stiffness, cellulose nanocrystal (CNC) from abaca plant is incorporated to provide the necessary toughness for 3D printable biopolymer. Hence, this work demonstrates 3D printing of CNC-filled biomaterial with significant improvement in mechanical and surface properties. These findings may potentially pave the way for an alternative option in providing innovative and cost-effective patient-specific solutions to various fields in medical industry. To the best of our knowledge, this work presents the first successful demonstration of 3D printing of CNC nanocomposite hydrogel via stereolithography (SL) forming a complex architecture with enhanced material properties potentially suited for tissue engineering.

Platelet Adhesion and Activation on Chiral Surfaces: The Influence of Protein Adsorption

Adsorbed proteins and their conformational change on blood-contacting biomaterials will determine their final hemocompatibility. It has frequently been reported that surface chirality of biomaterials may highly influence their protein adsorption behavior. Here, lysine and tartaric acid with different chirality were immobilized onto TiO₂ films respectively, and the influence of surface chirality on protein adsorption, platelet adhesion, and activation was also investigated. It showed that the l- and d-molecule grafted samples had almost the same grafting density, surface topography, chemical components, and hydrophilicity in this study. However, biological behaviors such as protein adsorption, platelet adhesion, and activation were quite different. The d-lysine grafted surface had a greater ability to inhibit both bovine serum albumin and fibrinogen adsorption, along with less degeneration of fibrinogen compared to the l-lysine anchored surface. However, the d-tartaric acid grafted surface adsorbed more protein but with less denatured fibrinogen compared to the l-tartaric acid grafted one. Further studies showed that the secondary structural change of the adsorbed albumin and fibrinogen on all surfaces with deduction of the α-helix content and increase of disordered structure, while the changing degree was apparently varied. As a result, the d-lysine immobilized surface absorbed less platelets and red blood cells and achieved slightly increased platelet activation. For tartaric acid anchored surfaces, a larger number of platelets adhered to the D-surface but were less activated compared to the L-surface. In conclusion, the surface chirality significantly influenced the adsorption and conformational change of blood plasma protein, which in turn influenced both platelet adhesion and activation.

Neutron reflectometry yields distance-dependent structures of nanometric polymer brushes interacting across water

The interaction between surfaces displaying end-grafted hydrophilic polymer brushes plays important roles in biology and in many wet-technological applications. In this context, the conformation of the brushes upon their mutual approach is crucial, because it affects interaction forces and the brushes' shear-tribological properties. While this aspect has been addressed by theory, experimental data on polymer conformations under confinement are difficult to obtain. Here, we study interacting planar brushes of hydrophilic polymers with defined length and grafting density. Via ellipsometry and neutron reflectometry we obtain pressure-distance curves and determine distance-dependent polymer conformations in terms of brush compression and reciprocative interpenetration. While the pressure-distance curves are satisfactorily described by the Alexander-de-Gennes model, the pronounced brush interpenetration as seen by neutron reflectometry motivates detailed simulation-based studies capable of treating brush interpenetration on a quantitative level.

Self-assembly of two hydrophobins from marine fungi affected by interaction with surfaces

Hydrophobins are amphiphilic fungal proteins endowed with peculiar characteristics, such as a high surface activity and an interface triggered self-assembly. Several applications of these proteins have been proposed in the food, cosmetics and biomedical fields. Moreover, their use as proteinaceous coatings can be effective for materials and nanomaterials applications. The discovery of novel hydrophobins with diverse properties may be advantageous from both the scientific and industrial points of view. Stressful environmental conditions of fungal growth may induce the production of proteins with peculiar features. Two Class I hydrophobins from fungi isolated from marine environment have been recently purified. Herein, their propensity to aggregate forming nanometric fibrillar structures has been compared, using different techniques, such as circular dichroism, dynamic light scattering and Thioflavin T fluorescence assay. Furthermore, TEM and AFM images indicate that the interaction of these proteins with specific surfaces, are crucial in the formation of amyloid fibrils and in the assembly morphologies. These self-assembling proteins show promising properties as bio-coating for different materials via a green process. Biotechnol. Bioeng. 2017;114: 2173-2186. © 2017 Wiley Periodicals, Inc.

Attenuation of the in vitro neurotoxicity of 316L SS by graphene oxide surface coating

A persistent theme in biomaterials research comprises of surface engineering and modification of bare metallic substrates for improved cellular response and biocompatibility. Graphene Oxide (GO), a derivative of graphene, has outstanding chemical and mechanical properties; its large surface to volume ratio, ease of surface modification and processing make GO an attractive coating material. GO-coatings have been extensively studied as biosensors. Further owing to its surface nano-architecture, GO-coated surfaces promote cell adhesion and growth, making it suitable for tissue engineering applications. The need to improve the long-term durability and therapeutic effectiveness of commercially available bare 316L stainless steel (SS) surfaces led us to adopt a polymer-free approach which is cost-effective and scalable. GO was immobilized on to 316L SS utilizing amide linkage, to generate a strongly adherent uniform coating with surface roughness. GO-coated 316L SS surfaces showed increased hydrophilicity and biocompatibility with SHSY-5Y neuronal cells, which proliferated well and showed decreased reactive oxygen species (ROS) expression. In contrast, cells did not adhere to bare uncoated 316L SS meshes nor maintain viability when cultured in the vicinity of bare meshes. Therefore the combination of the improved surface properties and biocompatibility implies that GO-coating can be utilized to overcome pertinent limitations of bare metallic 316L SS implant surfaces, especially SS neural electrodes. Also, the procedure for making GO-based protective coatings can be applied to numerous other implants where the development of such protective films is necessary.

Direct measurement of interaction forces between bovine serum albumin and poly(ethylene oxide) in water and electrolyte solutions

The net interaction between a probe tip coated with bovine serum albumin (BSA) protein and a flat substrate coated with poly(ethylene oxide) (PEO) polymer was measured directly on approach in water and electrolyte solutions using AFM. The approach force curve between the two surfaces was monotonically repulsive in water and in electrolyte solutions. At pH ~5, slightly above the isoelectric point (pI) of BSA, and at large distances, the force was dominated by electrostatic repulsion between the oxygen atoms of the incoming protein with those belonging to the ether groups of PEO. Such repulsive force and range decreased in NaCl. Under physiological conditions, pH 6, BSA is definitely charged and the electrostatic repulsion with ether groups in PEO appears at larger separation distances. Interestingly, at pH 4, below the pI of BSA, the repulsion decreased because of an attractive, although weak, electrostatic force that appeared between the ether groups in PEO and the positively charged amino groups of BSA. However, for all solution conditions, once compression of PEO begun, the net repulsion was always dominated by short-range polymeric steric repulsion and repulsive enthalpy penalties for breaking PEO-water bonds. Results suggest that PEO in mushroom conformation may also be effective in reducing biofouling.

Self-assembled supramolecular polymers with tailorable properties that enhance cell attachment and proliferation

Self-assembled supramolecular scaffolds, a combination of noncovalent interactions within a biocompatible polymer substrate, can be used for efficient construction of highly-controlled self-organizing hierarchical structures; these newly-developed biomaterials exhibit excellent mechanical properties, tunable surface hydrophilicity, low cytotoxicity and high biodegradability, making them highly attractive for tissue engineering and regenerative medicine applications. Herein, we demonstrate a novel supramolecular poly(ε-caprolactone) (PCL) containing self-complementary sextuple hydrogen-bonded uracil-diamidopyridine (U-DPy) moieties, which undergoes spontaneous self-assembly to form supramolecular polymer networks. Inclusion of various U-DPy contents enhanced the mechanical strength and viscosities of the resulting materials by up to two orders of magnitude compared to control PCL. Surface wettability and morphological studies confirmed physically-crosslinked films can be readily tailored to provide the desired surface properties. Cell viability assays indicated the excellent in vitro biocompatibility of U-DPy-functionalized substrates and indicate the potential of these materials for various biomedical applications. More importantly, mouse fibroblast NIH/3T3 cells cultured on these substrates displayed a more elongated cell morphology and had substantially higher cell densities than cells seeded on control PCL substrate, which indicates that introduction of U-DPy moieties into polymer matrixes could be used to create tissue culture surfaces that enhance cell attachment and proliferation. This new system is suggested as a potential route towards the practical realization of next-generation tissue-engineering scaffolds.

STATEMENT OF SIGNIFICANCE

In this study, we report a significant breakthrough in development of self-assembled supramolecular polymers to form well-defined scaffolds through self-complementary hydrogen-bonding interactions. These newly developed materials exhibited extremely good mechanical properties, fine-tunable hydrophilic characteristics and excellent biocompatibility due to hydrogen-bond-induced physical cross-linking. Importantly, cell adhesion and proliferation assays indicated that these substrates efficiently promoted the growth of mouse embryonic fibroblasts NIH/3T3 cells in vitro. Thus, this finding provides a simple and effective route for the development of next-generation tissue-engineering scaffolds that have improved mechanical properties, increased surface hydrophilicity and can enhance the growth and biological activity of adherent cells.

Reduced Blood Cell Adhesion on Polypropylene Substrates through a Simple Surface Zwitterionization

To overcome the thrombogenic reactions of hydrocarbon-based biomaterials in clinical blood treatment, we introduce a model study of surface zwitterionization of a polypropylene (PP) substrate using a set of well-defined copolymers for controlling the adhesion of blood cells in vitro. Random and block copolymers containing zwitterionic units of 2-methacryloyloxyethyl phosphorylcholine (MPC), [3-(methacryloylamino)propyl]dimethyl(3-sulfopropyl)ammonium hydroxide inner salt (SBAA), or nonionic units of 2-hydroxyethyl methacrylate (HEMA) with a controlled hydrophobic segment of 70% n-butyl methacrylate (BMA) units in these polymers were synthesized through reversible addition-fragmentation chain transfer polymerization. A systematic study of how zwitterionic and nonionic copolymer architectures associated with controlled chain orientation via hydration processes affect blood compatibility is reported. The surface wettability of PP substrates coated with the block copolymer with poly(MPC) (PMPC) segments was higher than that of the random copolymer poly(MPC-random-BMA). However, only the random copolymers with SBAA units demonstrate a higher surface wettability. The PP substrate coated with nonionic copolymers containing HEMA units showed relatively lower hydration capability associated with higher protein adsorption, platelet adhesion, and leukocyte attachment than those with zwitterionic copolymers. The random copolymer poly(SBAA-random-BMA) coated on the PP substrates exhibited resistance to cell adhesion in human whole blood at a level comparable to that of MPC copolymers. An ideal zwitterionic PP substrate could be obtained by coating it with a block copolymer composed of PMPC and poly(BMA) (PBMA) segments, PMPC-block-PBMA. The water contact angle decreased dramatically from approximately 100° on the original PP substrate to 11° within 30 s. The number of blood cells attached on PMPC-block-PBMA decreased significantly to less than 2.5% of that on original PP. These results prove that the rational design of zwitterionic polymers incorporated with a hydrophobic anchoring portion provides a promising approach to reduce blood cell adhesion and protein adsorption of hydrocarbon-based biomaterials applied in direct contact with human whole blood.

Phosphorylcholine oligomer-grafted graphene oxide for tumor-targeting doxorubicin delivery

Phosphorylcholine oligomer-grafted, folic acid-labeled and doxorubicin-loaded graphene oxide was found to be a potential versatile platform for biomarker-directed drug delivery with optimal biocompatibility.