Vitrimers: Permanently crosslinked polymers with dynamic network topology

Diketoenamine-based Vitrimers via Thiol-ene photopolymerization

Likened to both thermosets and thermoplastics, vitrimers are a unique class of materials that combine remarkable stability, healability, and reprocessability. Herein, we describe a photopolymerized thiol-ene-based vitrimer that undergoes dynamic covalent exchanges through uncatalyzed transamination of enamines derived from cyclic β-triketones, whereby the low energy barrier for exchange facilitates reprocessing and enables rapid depolymerization. Accordingly, we devised an alkene-functionalized β-triketone, 5,5-dimethyl-2-(pent-4-enoyl)cyclohexane-1,3-dione, which was reacted with 1,6-diaminohexane in a stoichiometrically imbalanced fashion (∼1:0.85 primary amine:triketone). The resulting networks exhibited subambient glass transition temperature (T_g = 5.66°C) by differential scanning calorimetry (DSC). Using a Maxwell stress-relaxation fit, the topology freezing temperature (T_v ) was calculated to be -32°C. Small-amplitude oscillatory shear (SAOS) rheological analysis enabled us to identify a practical critical temperature above which the vitrimer could be successfully reprocessed (T_v,eff ). Via the introduction of excess primary amines, we could readily degrade the networks into monomeric precursors, which were in turn reacted with diamines to regenerate reprocessable networks. Photopolymerization provides unique spatiotemporal control over the network topology, thereby opening the path for further investigation of vitrimer properties. As such, this work expands the toolbox of chemical upcycling of networks and enables their wider implementation. This article is protected by copyright. All rights reserved.

Facile Surface Depolymerization Promotes the Welding of Hard Epoxy Vitrimer

Welding via bond exchange reactions has provided advances in obtaining high-quality joining performance. However, the reported welding method requires a relatively high press force, and challenges are still encountered in welding hard vitrimer. In this work, a facile surface depolymerization strategy was introduced to weld high-performance epoxy vitrimer. The vitrimers were firstly dissolved into ethylene glycol for depolymerization based on the solvent-assisted bond exchange reactions. Then, the depolymerized vitrimers were welded under heat and press force. The effect of the depolymerizing time, welding pressure, welding temperature and welding time on the welding strength were further investigated. It was found that there were optimal values for the depolymerizing time, welding pressure, and welding temperature, respectively, for the welding strength, while the welding strength increased with increasing welding time. Through facile surface degradation, the welding pressure was highly reduced, while the welding strength was increased. With surface depolymerization, the welding strength was 1.55-times higher, but the magnitude of press force was 1/1000-times than that with no surface depolymerization. It is elucidative that surface depolymerization can be used to weld hard vitrimer composites alongside reducing the press force effectively.

Intrinsically Re-curable Photopolymers Containing Dynamic Thiol-Michael Bonds

The development of photopolymers that can be depolymerized and subsequently re-cured using the same light stimulus presents a significant technical challenge. A bio-sourced terpenoid structure, l-carvone, inspired the creation of a re-curable photopolymer in which the orthogonal reactivity of an irreversible thioether and a dynamic thiol-Michael bond enables both photopolymerization and thermally driven depolymerization of mechanically robust polymer networks. The di-alkene containing l-carvone was partially reacted with a multi-arm thiol to generate a non-crosslinked telechelic photopolymer. Upon further UV exposure, the photopolymer crosslinked into a mechanically robust network featuring reversible Michael bonds at junction points that could be activated to revert, or depolymerize, the network into a viscous telechelic photopolymer. The regenerated photopolymer displayed intrinsic re-curability over two recycles while maintaining the desirable thermomechanical properties of a conventional network: insolubility, resistance to stress relaxation, and structural integrity up to 170 °C. Our findings present an on-demand, re-curable photopolymer platform based on a sustainable feedstock.

Photopolymerizable Ionogel with Healable Properties Based on Dioxaborolane Vitrimer Chemistry

Ionogels are solid polymer gel networks loaded with ionic liquid (IL) percolating throughout each other, giving rise to ionically conducting solid electrolytes. They combine the mechanical properties of polymer networks with the ionic conductivity, non-volatility, and non-flammability of ILs. In the frame of their applications in electrochemical-based flexible electronics, ionogels are usually subjected to repeated deformation, making them susceptible to damage. It appears critical to devise a simple and effective strategy to improve their durability and lifespan by imparting them with healing ability through vitrimer chemistry. In this work, we report the original in situ synthesis of polythioether (PTE)-based vitrimer ionogels using fast photopolymerization through thiol-acrylate Michael addition. PTE-based vitrimer was prepared with a constant amount of the trithiol crosslinker and varied proportions of static dithiol spacers and dynamic chain extender BDB containing dynamic exchangeable boronic ester groups. The dynamic ionogels were prepared using 50 wt% of either 1-Ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide or 1-Ethyl-3-methylimidazolium trifluoromethanesulfonate, both of which were selected for their high ionic conductivity. They are completely amorphous (T_g below -30 °C), suggesting they can be used at low temperatures. They are stretchable with an elongation at break around 60%, soft with Young's modulus between 0.4 and 0.6 MPa, and they have high ionic conductivities for solid state electrolytes in the order of 10^-4 S·cm^-1 at room temperature. They display dynamic properties typical of the vitrimer network, such as stress relaxation and healing, retained despite the large quantity of IL. The design concept illustrated in this work further enlarges the library of vitrimer ionogels and could potentially open a new path for the development of more sustainable, flexible electrochemical-based electronics with extended service life through repair or reprocessing.

Fused Filament Fabrication of a Dynamically Crosslinked Network Derived from Commodity Thermoplastics

A massive carbon footprint is associated with the ubiquitous use of plastics and their afterlife. Greenhouse gas (GHG) emissions from plastics are rising and increasingly consuming the global "carbon budget". It is, hence, paramount to implement an effective strategy to reclaim postconsumer plastic as feedstock for technologically innovative materials. Credible opportunity is offered by advances in materials chemistry and catalysis. Here, we demonstrate that by dynamically crosslinking thermoplastic polyolefins, commodity plastics can be upcycled into technically superior and economically competitive materials. A broadly applicable crosslinking strategy has been applied to polymers containing solely carbon-carbon and carbon-hydrogen bonds, initially by maleic anhydride functionalization, followed by epoxy-anhydride curing. These dynamic networks show a distinct rubber modulus above the melting transition. We demonstrate that sustainability and performance do not have to be mutually exclusive. The dynamic network can be extruded into a continuous filament to be in three-dimensional (3D) printing of complex objects, which retain the mechanical integrity of vitrimers. Being covalently crosslinked, these networks show a thermally triggered shape-memory response, with 90% recovery of a programmed shape. This study opens up the possibility of reclaiming recycled thermoplastics by imparting performance, sustainability, and technological advances to the reprocessed plastic.

Closed-loop additive manufacturing of upcycled commodity plastic through dynamic cross-linking

A sustainable closed-loop manufacturing would become reality if commodity plastics can be upcycled into higher-performance materials with facile processability. Such circularity will be realized when the upcycled plastics can be (re)processed into custom-designed structures through energy/resource-efficient additive manufacturing methods, especially by approachable and scalable fused filament fabrication (FFF). Here, we introduce a circular model epitomized by upcycling a prominent thermoplastic, acrylonitrile butadiene styrene (ABS) into a recyclable, robust adaptive dynamic covalent network (ABS-vitrimer) (re)printable via FFF. The full FFF processing of ABS-vitrimer overcomes the major challenge of (re)printing cross-linked materials and produces stronger, tougher, solvent-resistant three-dimensional objects directly reprintable and separable from unsorted plastic waste. This study thus offers an imminently adoptable approach for advanced manufacturing toward the circular plastics economy.

Using Nanosphere Embedding to Probe the Surface and Bulk Relaxation in Vitrimers

The relaxation behavior of vitrimers that is dominated by chemical exchange reactions plays a critical role in vitrimer processing and applications such as self-healing, welding, and others involving the dynamic nature of the vitrimers. Here, we use atomic force microscopy to image embedding of gold nanospheres into epoxy-based vitrimers to assess the surface and bulk relaxation in this material. The results show that even at temperatures well below the bulk topology freezing transition temperature, the nanospheres embed into the vitrimers. The activation energy for the relaxation at the surface and in bulk were estimated in the single measurement, and the former is found to be much lower than the latter. The increase in the surface relaxation is attributed to a combination of an acceleration effect on relaxation by network defects and a decrease in the number of intermolecular exchanges at the surface.

Tailored modular assembly derived self-healing polythioureas with largely tunable properties covering plastics, elastomers and fibers

To impart self-healing polymers largely adjustable dynamicity and mechanical performance, here we develop libraries of catalyst-free reversible polythioureas directly from commodity 1,4-phenylene diisothiocyanate and amines via facile click chemistry based modular assembly. By using the amine modules with various steric hindrances and flexibilities, the reversible thiourea units acquire triggering temperatures from room temperature to 120 °C. Accordingly, the derived self-healable, recyclable and controlled degradable dynamically crosslinked polythioureas can take effect within wide temperature range. Moreover, mechanical properties of the materials can be tuned covering plastics, elastomers and fibers using (i) different assemble modules or (ii) solid-state stretching. Particularly, unidirectional stretching leads to the record-high tensile strength of 266 MPa, while bidirectional stretching provides the materials with biaxial strengths up to over 120 MPa. The molecular mechanism and technological innovations discussed in this work may benefit promotion and application of self-healing polymers towards greatly diverse demands and scenarios.

Intrinsic self-healing polymers attract increasing attention but often suffer from a narrow self-healing temperature range and unsatisfactory mechanical performance. Here, the authors use click chemistry to develop a library of catalyst-free reversible polythioureas and demonstrate that the self-healing temperature and mechanical properties can be adjusted by controlling the flexibility and the steric environment.

Vitrimers: Using Dynamic Associative Bonds to Control Viscoelasticity, Assembly, and Functionality in Polymer Networks

Vitrimers have been investigated in the past decade for their promise as recyclable, reprocessable, and self-healing materials. In this Viewpoint, we focus on some of the key open questions that remain regarding how the molecular-scale chemistry impacts macroscopic physical chemistry. The ability to design temperature-dependent complex viscoelastic spectra with independent control of viscosity and modulus based on knowledge of the dynamic bond and polymer chemistry is first discussed. Next, the role of dynamic covalent chemistry on self-assembly is highlighted in the context of crystallization and nanophase separation. Finally, the ability of dynamic bond exchange to manipulate molecular transport and viscoelasticity is discussed in the context of various applications. Future directions leveraging dynamic covalent chemistry to provide insights regarding fundamental polymer physics as well as imparting functionality into polymers are discussed in all three of these highlighted areas.

Exchangeable Liquid Crystalline Elastomers and Their Applications

This Review presents and discusses the current state of the art in "exchangeable liquid crystalline elastomers", that is, LCE materials utilizing dynamically cross-linked networks capable of reprocessing, reprogramming, and recycling. The focus here is on the chemistry and the specific reaction mechanisms that enable the dynamic bond exchange, of which there is a variety. We compare and contrast these different chemical mechanisms and the key properties of their resulting elastomers. In the conclusion, we discuss the most promising applications that are enabled by dynamic cross-linking and present a summary table: a library of currently available materials and their main characteristics.

Boronic Acid Esters and Anhydrates as Dynamic Cross-Links in Vitrimers

Growing environmental awareness imposes on polymer scientists the development of novel materials that show a longer lifetime and that can be easily recycled. These challenges were largely met by vitrimers, a new class of polymers that merges properties of thermoplastics and thermosets. This is achieved by the incorporation of dynamic covalent bonds into the polymer structure, which provides high stability at the service temperature, but enables the processing at elevated temperatures. Numerous types of dynamic covalent bonds have been utilized for the synthesis of vitrimers. Amongst them, boronic acid-based linkages, namely boronic acid esters and boroxines, are distinguished by their quick exchange kinetics and the possibility of easy application in various polymer systems, from commercial thermoplastics to low molecular weight thermosetting resins. This review covers the development of dynamic cross-links. This review is aimed at providing the state of the art in the utilization of boronic species for the synthesis of covalent adaptable networks. We mainly focus on the synthetic aspects of boronic linkages-based vitrimers construction. Finally, the challenges and future perspectives are provided.

Impact of dynamic covalent chemistry and precise linker length on crystallization kinetics and morphology in ethylene vitrimers

Vitrimers, dynamic polymer networks with topology conserving exchange reactions, have emerged as a promising platform for sustainable and reprocessable materials. While prior work has documented how dynamic bonds impact stress relaxation and viscosity, their role on crystallization has not been systematically explored. Precise ethylene vitrimers with 8, 10, or 12 methylene units between boronic ester junctions were investigated to understand the impact of bond exchange on crystallization kinetics and morphology. Compared to linear polyethylene which has been heavily investigated for decades, a long induction period for crystallization is seen in the vitrimers ultimately taking weeks in the densest networks. An increase in melting temperatures (T_m) of 25-30 K is observed with isothermal crystallization over 30 days. Both C₁₀ and C₁₂ networks initially form hexagonal crystals, while the C₁₀ network transforms to orthorhombic over the 30 day window as observed with wide angle X-ray scattering (WAXS) and optical microscopy (OM). After 150 days of isothermal crystallization, the three linker lengths led to double diamond (C₈), orthorhombic (C₁₀), and hexagonal (C₁₂) crystals indicating the importance of precision on final morphology. Control experiments on a precise, permanent network implicate dynamic bonds as the cause of long-time rearrangements of the crystals, which is critical to understand for applications of semi-crystalline vitrimers. The dynamic bonds also allow the networks to dissolve in water and alcohol-based solvents to monomers, followed by repolymerization while preserving the mechanical properties and melting temperatures.

Synthesis and application of thiocarbamates via thiol-dioxazolone modified Lossen rearrangement

Thiocarbamates afforded from thiol-dioxazolone modified Lossen rearrangement under mild conditions were further applied to prepare polythiocarbamates with self-healing properties.

Blended vinylogous urethane/urea vitrimers derived from aromatic alcohols

An in-depth investigation of the condensation, substitution and transamination reactions in blended vinylogous urethane/urea vitrimers derived from commercially relevant alcohols, proven by detailed model studies and 16 prepared vitrimer networks.

Catalyst Control of Nanoscale Characteristic Length of the Glass Transition in Organic Strong Glass-Formers

We report the nanoscale characteristic length (ξ_α) in organic strong glass-formers at glass transition. Catalyst-dependent ξ_α of the epoxy-based covalent adaptable networks (CANs) is observed, that is, the more efficient the catalyst for the cross-linking reactions, the larger the ξ_α is, and upon thermal heating, the more broad the glass transition will be. The observed structural properties at glass transition can be correlated with the topology freezing transition where the fluctuations of network topology aroused from the bond exchange reactions are frozen. This study proposes the catalyst-dependent structural properties in CANs and may fill the structural gap between the glass transition and topology freezing transition of organic strong glass-formers.

Mechanically Interlocked Vitrimers

Mechanically interlocked networks (MINs) have emerged as an encouraging platform for the development of mechanically robust yet adaptive materials. However, the difficulty in reversibly breaking the mechanical bonds poses a real challenge to MINs as customizable and sustainable materials. Herein, we couple the vitrimer chemistry with mechanically interlocked structures to generate a new class of MINs─referred to as mechanically interlocked vitrimers (MIVs)─to address the challenge. Specifically, we have prepared the acetoacetate-decorated [2]rotaxane that undergoes catalyst-free condensation reaction with two commercially available multiamine monomers to furnish MIVs. Compared with the control whose wheels are nonslidable under applied force, our MIVs with slidable mechanically interlocked motifs showcase enhanced mechanical performance including Young's modulus (18.5 ± 0.9 vs 1.0 ± 0.1 MPa), toughness (3.7 ± 0.1 vs 0.9 ± 0.1 MJ/m³), and damping capacity (98% vs 72%). The structural basis behind unique property profiles is demonstrated to be the force-induced host-guest dissociation and consequential intramolecular sliding of the wheels along the axles. The peculiar behaviors represent a consecutive energy dissipation mechanism, which provides a complement to other pathways that mainly depend on the breaking of sacrificial bonds. Moreover, by virtue of the vitrimer chemistry of vinylogous urethanes, we impart reprocessability and chemical recyclability to the MINs, thereby empowering the reconfiguration of the networks without breaking of the mechanical bonds. Finally, it is disclosed that the intramolecular motions of [2]rotaxanes could accelerate the dynamic exchange of the vinylogous urethane bonds via loosening the network, suggestive of a synergistic effect between the dual dynamic entities.

Room-Temperature Self-Healable and Mechanically Robust Thermoset Polymers for Healing Delamination and Recycling Carbon Fibers

The advocacy of carbon neutrality and circular economy encourages people to pursue self-healing and recycling of glassy thermoset polymers in a more realistic and energy-saving manner, the best being intrinsic healing under room temperature. However, the high mechanical robustness and healing ability are mutually exclusive because of their completely opposite requirements for the mobility of the polymer networks. Here, we report a dual-cross-linked network by slightly coupling the low-molecular-weight branched polyethylenimine with an ester-containing epoxy monomer in a nonstoichiometric proportion. The highly mobile and dense noncovalent hydrogen bonds at the chain branches and ends can not only complement the mechanical robustness (tensile strength of 61.6 MPa, elastic modulus of 1.6 GPa, and toughness of 19.2 MJ/m3) but also endow the glassy thermoset polymer (Tg > 40 °C) with intrinsic self-healing ability (healing efficiency > 84%) at 20 °C. Moreover, the resultant covalent adaptive network makes the thermoset polymer stable to high temperatures and solvents, yet it is readily dissolved in ethylene glycol through internal catalyzed transesterification. The application to room temperature delamination healing and carbon fiber recycling was demonstrated as a proof-of-concept.

Fabricating a Repairable, Recyclable, Imine-based Dynamic Covalent Thermosetting Resin with Excellent Water Resistance by Introducing Dynamic Covalent Oxime Bonds

The sustainable production of adaptive, recyclable and imine-based dynamic covalent thermosetting resins (DCTRs) presents an opportunity for polymer scientists to address the prevalent environmental and energy concerns associated with current petroleum-based plastics. However, the imine-based DCTRs easily decompose in the presence of water, which can weaken the mechanical properties in imine-based polymers. In this study, we designed oxime-imine DCTRs that are stable in the presence of water and exhibit good mechanical properties. In the presence of one kind of amino group catalyst, the oxime-imine DCTRs could be completely recycled. Additionally, these well-designed oxime-imine DCTRs have good mechanical properties, high glass transition temperatures (166 °C), and good thermal stabilities. Taken together, this work offers a sustainable solution for the design and manufacture of high-value degradable materials intended for applications in which recyclability and reusability are indispensable.

Rosin-Based Epoxy Vitrimers with Dynamic Boronic Ester Bonds

Rosin is an abundantly available natural product. In this paper, for the first time, a rosin derivative is employed as the main monomer for preparation of epoxy vitrimers to improve the mechanical properties of vitrimers. Novel epoxy vitrimer networks with dynamic reversible covalent boronic ester bonds are constructed by a reaction between thiols in 2,2'-(1,4-phenylene)-bis (4-mercaptan-1,3,2-dioxaborolane) (BDB) as a curing agent and epoxy groups in the rosin derivative. The rosin-based epoxy vitrimer networks are fully characterized by Fourier transform infrared spectroscopy (FTIR), an equilibrium swelling experiment, and dynamic mechanical analysis (DMA). The obtained rosin-based epoxy vitrimers possess superior thermostability and good mechanical properties. Due to transesterification of boronic ester bonds, rosin epoxy vitrimer network topologies can be altered, giving welding, recycle, self-healing, and shape memory abilities to the fabricated polymer. Besides, the effects of treating time and temperature on welding capability is investigated, and it is found that the welding efficiency of the 20% C-FPAE sample is >93% after treatment for 12 h at 160 °C. Moreover, through a hot press, the pulverized samples of 20% C-FPAE can be reshaped several times and most mechanical properties are restored after reprocessing at 200 °C for 60 min. Finally, chemical degradation is researched for the rosin-based epoxy vitrimers.

Reprocessing of Covalent Adaptable Polyamide Networks through Internal Catalysis and Ring-Size Effects

Here, we report the introduction of internally catalyzed amide bonds to obtain covalent adaptable polyamide networks that rely on the dissociation equilibrium between dicarboxamides and imides. While amide bonds are usually considered to be robust and thermally stable, the present study shows that their dynamic character can be activated by a smart choice of available building blocks without the addition of any external catalyst or other additives. Hence, a range of polyamide-based dynamic networks with variable mechanical and viscoelastic properties have been obtained in a systematic study, using a straightforward curing process of dibasic ester and amine compounds. Since the dissociation process involves a cyclic imide formation, the correlation between ring size and the thermomechanical viscosity profile was studied for five- to seven-membered ring intermediates, depending on the chosen dibasic ester monomer. This resulted in a marked temperature response with activation energies in the range of 116-197 kJ mol^-1, yielding a sharp transition between elastic and viscous behavior. Moreover, the ease and versatility of this chemistry platform were demonstrated by selecting a variety of amines, resulting in densely cross-linked dynamic networks with T_g values ranging from -20 to 110 °C. With this approach, it is possible to design amorphous polyamide networks with an acute temperature response, allowing for good reprocessability and, simultaneously, high resistance to irreversible deformation at elevated temperatures.

Mechanically Strong, Autonomous Self-Healing, and Fully Recyclable Silicone Coordination Elastomers with Unique Photoluminescent Properties

The combination of excellent mechanical performances, high reprocess efficiency, and wide-range tunability for functional dynamic siloxane materials is a challenging subject. Herein, the fabrication of mechanically strong, autonomous self-healing, and fully recyclable silicone elastomers with unique photoluminescent properties by coordination of poly(dimethylsiloxane) (PDMS) containing coordination bonding motifs with Zn²⁺ ions is reported. Salicylaldimine groups, which are introduced into the polysiloxane backbone via mild Schiff-base reaction, coordinate with zinc ions to form elastomeric networks The obtained supramolecular elastomers have excellent mechanical properties, with the optimized tensile strength up to 10.0 MPa, which is unprecedented among the reported thermoplastic polysiloxane-based elastomers. Both mechanical properties and stress relaxation kinetics are tunable via adjusting the length of PDMS segments or the molar ratio of metal versus salicylaldimine. Furthermore, these elastomers can be conveniently healed and recycled to regain their original mechanical properties and integrity under mild conditions. In addition, this new kind of polysiloxane also exhibits coordination-enhanced fluorescence, showing great promise for preparing photoluminescent elastomers or coatings.

Efficient Exchange in a Bioinspired Dynamic Covalent Polymer Network via a Cyclic Phosphate Triester Intermediate

Bond exchange via neighboring group-assisted reactions in dynamic covalent networks results in efficient mechanical relaxation. In Nature, the high reactivity of RNA toward nucleophilic substitution is largely attributed to the formation of a cyclic phosphate ester intermediate via neighboring group participation. We took inspiration from RNA to develop a dynamic covalent network based on β-hydroxyl-mediated transesterifications of hydroxyethyl phosphate triesters. A simple one-step synthetic strategy provided a network containing phosphate triesters with a pendant hydroxyethyl group. 31P solid-state NMR demonstrated that a cyclic phosphate triester is an intermediate in transesterification, leading to dissociative network rearrangement. Significant viscous flow at 60-100 °C makes the material suitable for fast processing via extrusion and compression molding.

Dynamic Semicrystalline Networks of Polypropylene with Thiol-Anhydride Exchangeable Crosslinks

Thermoplastic polyolefins (TPOs) crosslinked by dynamic covalent bonds (xTPOs) have the potential to be the most utilized class of polymer in the world, with applications ranging from household and automotive to biomedical devices and additive manufacturing. xTPO combines the benefits of thermoplastics and thermosets in a "single material" and potentially avoids their shortcomings. Here, we describe a new two-stage reaction extrusion strategy of TPOs with a backbone consisting of inert C-C bonds (polypropylene, PP), and thiol-anhydride, to dynamically crosslink PP through thiol-thioester bond exchange. The degree of PP crosslinking determines the rubber plateau modulus above the melting point of the plastic: the modulus at 200 °C increases from zero in the melt to 23 kPa at 6% crosslinking, to 60 kPa at 20%, to 105 kPa at 40%. The overall mechanical strength of the solid xTPO plastic is 25% higher compared to the original PP, and the gel fraction of xTPO reaches 55%. Finally, we demonstrate that the crosslinked xTPO material is readily reprocessable (recycled, remolded, rewelded, and 3D printed).

Aminoesterenamide Achieved by Three-Component Reaction Heading toward Tailoring Covalent Adaptable Network with Great Freedom

Covalent adaptable networks (CANs) have recently received extensive interests due to their reprocessability and repairability. Rethinking the libraries of the published CANs, most of them are fabricated by one/two-component reactions and few cases utilize multi-component reactions to construct CANs while multi-component reactions are conductive to tailoring the properties of polymers due to their structural designability and flexible choice of raw materials. A novel kind of dynamic covalent bond named aminoesterenamide is presented through three-component reaction between acetoacetyl, amine and isocyanate. Aminoesterenamide exhibits thermal reversibility through dissociating into vinylogous urethane and isocyanate. When it is used to prepare CANs, the synthesized polymer networks can be reprocessed many times via the exchange reaction between aminoesterenamides. Moreover, the forming of aminoesterenamide involving three starting components imparts CANs with great freedom to tailor their properties. Therefore, the authors believe this method that utilizes three-component reaction to fabricate CANs would bring new stories and perspectives to the exploration of new types of CANs.