Hydration of polyethylene glycol-grafted liposomes

Novel serum-tolerant lipoplexes target the folate receptor efficiently

Gene transfer using non-viral vectors is a promising approach for the safe delivery of nucleic acid therapeutics. In this study, we investigate a lipid-based system for targeted gene delivery to malignant cells overexpressing the folate receptor (FR). Cationic liposomes were formulated with and without the targeting ligand folate conjugated to distearoylphosphatidyl ethanolamine polyethylene glycol 2000 (DSPE-PEG2000), the novel cytofectin 3β[N(N(1),N(1)-dimethlaminopropylsuccinamidoethane)-carbamoyl]cholesterol (SGO4), which contains a 13atom, 15Å spacer element, and the helper lipid, dioleoylphosphatidylethanolamine (DOPE). Physicochemical parameters of the liposomes and lipoplexes were obtained by zeta sizing, zeta potential measurement and cryo-TEM. DNA-binding and protection capabilities of liposomes were confirmed by gel retardation assays, EtBr intercalation and nuclease protection assays. The complexes were assessed in an in vitro system for their effect on cell viability using the MTT assay, and gene transfection activity using the luciferase assay in three cell lines; HEK293 (FR-negative), HeLa (FR(+)-positive), KB (FR(++)-positive). Low cytotoxicities were observed in all cell lines, while transgene activity promoted by folate-tagged lipoplexes in FR-positive lines was tenfold greater than that by untargeted constructs and cell entry by folate complexes was demonstrably by FR mediation. These liposome formulations have the design capacity for in vivo application and may therefore be promising candidates for further development.

PEGylated and non-PEGylated siRNA lipoplexes formulated with cholesteryl cytofectins promote efficient luciferase knockdown in HeLa tat luc cells

Delivery of small interfering RNAs (siRNAs) remains a major challenge in their development for therapeutic applications, and cationic liposomes are being actively investigated for this purpose. Six liposome formulations containing the cytofectins 3β[N-(N ',N '-dimethylaminopropane)-carbamoyl] cholesterol (Chol-T) or 3β[N-(N ',N ',-dimethylaminopropylsuccinamidohydrazido)-carbamoyl] cholesterol (MS09) and varying amounts of distearoylphosphatidylethanolamine poly(ethylene glycol)2000, were prepared. Lipoplexes formed with siRNA were characterized by gel retardation analysis and cryo-electron microscopy. All lipoplexes exhibited low cytotoxicity in the HeLa tat luc cell line while Chol-T lipoplexes, containing anti-luciferase siRNA, achieved 93.4% knockdown of the luciferase transcript at 30 nM siRNA. Poly(ethylene glycol)2000 incorporation only marginally reduced knockdown efficiency.

Hyperbranched polymer-gold nanoparticle assemblies: role of polymer architecture in hybrid assembly formation and SERS activity

Plasmonic gold nanoassemblies that self-assemble with the aid of linking molecules or polymers have the potential to yield controlled hierarchies of morphologies and consequently result in materials with tailored optical (e.g., localized surface plasmon resonances (LSPR)) and spectroscopic properties (e.g., surface-enhanced Raman scattering (SERS)). Molecular linkers that are structurally well-defined are promising for forming hybrid nanoassemblies which are stable in aqueous solution and are increasingly finding application in nanomedicine. Despite much ongoing research in this field, the precise role of molecular linkers in governing the morphology and properties of the hybrid nanoassemblies remains unclear. Previously we have demonstrated that branched linkers, such as hyperbranched polymers, with specific anchoring end groups can be successfully employed to form assemblies of gold NPs demonstrating near-infrared SPRs and intense SERS scattering. We herein introduce a tailored polymer as a versatile molecular linker, capable of manipulating nanoassembly morphologies and hot-spot density. In addition, this report explores the role of the polymeric linker architecture, specifically the degree of branching of the tailored polymer in determining the formation, morphology, and properties of the hybrid nanoassemblies. The degree of branching of the linker polymer, in addition to the concentration and number of anchoring groups, is observed to strongly influence the self-assembly process. The assembly morphology shifts primarily from 1D-like chains to 2D plates and finally to 3D-like globular structures, with increase in degree of branching of the macromolecular linker. Insights have been gained into how the morphology influences the SERS performance of these nanoassemblies with respect to hot-spot density. These findings supplement the understanding of the morphology determining nanoassembly formation and pave the way for the possible application of these nanoassemblies as SERS biosensors for medical diagnostics.

Lipid bilayer modules as determinants of K+ channel gating

The crystal structure of the sensorless pore module of a voltage-gated K(+) (Kv) channel showed that lipids occupy a crevice between subunits. We asked if individual lipid monolayers of the bilayer embody independent modules linked to channel gating modulation. Functional studies using single channel current recordings of the sensorless pore module reconstituted in symmetric and asymmetric lipid bilayers allowed us to establish the deterministic role of lipid headgroup on gating. We discovered that individual monolayers with headgroups that coat the bilayer-aqueous interface with hydroxyls stabilize the channel open conformation. The hydroxyl need not be at a terminal position and the effect is not dependent on the presence of phosphate or net charge on the lipid headgroup. Asymmetric lipid bilayers allowed us to determine that phosphoglycerides with glycerol or inositol on the extracellular facing monolayer stabilize the open conformation of the channel. This indirect effect is attributed to a change in water structure at the membrane interface. By contrast, inclusion of the positively charged lysyl-dioleoyl-phosphatidylglycerol exclusively on the cytoplasmic facing monolayer of the bilayer increases drastically the probability of finding the channel open. Such modulation is mediated by a π-cation interaction between Phe-19 of the pore module and the lysyl moiety anchored to the phosphatidylglycerol headgroup. The new findings imply that the specific chemistry of the lipid headgroup and its selective location in either monolayer of the bilayer dictate the stability of the open conformation of a Kv pore module in the absence of voltage-sensing modules.

Ligand-targeted liposome design: challenges and fundamental considerations

Nanomedicine, particularly liposomal drug delivery, has expanded considerably over the past few decades, and several liposomal drugs are already providing improved clinical outcomes. Liposomes have now progressed beyond simple, inert drug carriers and can be designed to be highly responsive in vivo, with active targeting, increased stealth, and controlled drug-release properties. Ligand-targeted liposomes (LTLs) have the potential to revolutionize the treatment of cancer. However, these highly engineered liposomes generate new problems, such as accelerated clearance from circulation, compromised targeting owing to non-specific serum protein binding, and hindered tumor penetration. This article highlights recent challenges facing LTL strategies and describes the advanced design elements used to circumvent them.

Surface engineering of liposomes for stealth behavior

Liposomes are used as a delivery vehicle for drug molecules and imaging agents. The major impetus in their biomedical applications comes from the ability to prolong their circulation half-life after administration. Conventional liposomes are easily recognized by the mononuclear phagocyte system and are rapidly cleared from the blood stream. Modification of the liposomal surface with hydrophilic polymers delays the elimination process by endowing them with stealth properties. In recent times, the development of various materials for surface engineering of liposomes and other nanomaterials has made remarkable progress. Poly(ethylene glycol)-linked phospholipids (PEG-PLs) are the best representatives of such materials. Although PEG-PLs have served the formulation scientists amazingly well, closer scrutiny has uncovered a few shortcomings, especially pertaining to immunogenicity and pharmaceutical characteristics (drug loading, targeting, etc.) of PEG. On the other hand, researchers have also begun questioning the biological behavior of the phospholipid portion in PEG-PLs. Consequently, stealth lipopolymers consisting of non-phospholipids and PEG-alternatives are being developed. These novel lipopolymers offer the potential advantages of structural versatility, reduced complement activation, greater stability, flexible handling and storage procedures and low cost. In this article, we review the materials available as alternatives to PEG and PEG-lipopolymers for effective surface modification of liposomes.

Enhanced cellular uptake of peptide-targeted nanoparticles through increased peptide hydrophilicity and optimized ethylene glycol peptide-linker length

Ligand-targeted nanoparticles are emerging drug delivery vehicles for cancer therapy. Here, we demonstrate that the cellular uptake of peptide-targeted liposomes and micelles can be significantly enhanced by increasing the hydrophilicity of the targeting peptide sequence while simultaneously optimizing the EG peptide-linker length. Two distinct disease models were analyzed, as the nanoparticles were functionalized with either VLA-4 or HER2 antagonistic peptides to target multiple myeloma or breast cancer cells, respectively. Our results demonstrated that including a short oligolysine chain adjacent to the targeting peptide sequence effectively increased cellular uptake of targeted nanoparticles up to ∼80-fold using an EG6 peptide-linker in liposomes and ∼27-fold using an EG18 peptide-linker in micelles for the VLA-4/multiple myeloma system. Similar trends were also observed in the HER2/breast cancer system with the EG18 peptide-linker resulting in optimal uptake for both types of nanoparticles. Cellular uptake efficiency of these formulations was also confirmed under fluidic conditions mimicking physiological systems. Taken together, these results demonstrated the significance of using the right design elements to improve the cellular uptake of nanoparticles.

Interaction of the antimicrobial peptide gomesin with model membranes: a calorimetric study

Gomesin is a potent cationic antimicrobial peptide (z = +6) isolated from the Brazilian spider Acanthoscurria gomesiana . The interaction of gomesin with large unilamellar vesicles composed of a 1:1 mixture of zwitterionic (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) and anionic (1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) phospholipids is studied with isothermal titration calorimetry (ITC). In parallel, light scattering and optical microscopy are used to assess peptide-induced vesicle aggregation. The ability of gomesin to permeabilize the membrane is examined with fluorescence spectroscopy of the leakage of 5,6-carboxyfluorescein (CF). Vesicles coated with 3 mol % 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (PE-PEG) lipids are also investigated to assess the influence of peptide-induced vesicle aggregation in the activity of gomesin. The ITC and light scattering titrations are done in two ways: lipid into peptide and peptide into lipid injections. Although some differences arise between the two setups, the basic interaction of gomesin with anionic vesicles is preserved. A surface partition model combined with the Gouy-Chapman theory is put forward to fit the ITC results. The intrinsic binding constant of gomesin is found to be K ≈ 10(3) M(-1). The interaction of gomesin with anionic membranes is highly exothermic and enthalpy-driven. Binding of gomesin is virtually always accompanied by vesicle aggregation and changes in membrane permeability, leading to CF leakage. Addition of PE-PEG to the membrane strongly attenuates vesicle aggregation but does not significantly change the mode of action of gomesin. The results point to a strong interaction of gomesin with the membrane surface, causing membrane rupture without a deep penetration into the bilayer core.

Nano-sized CT contrast agents

Computed tomography (CT) is one of the most widely used clinical imaging modalities. In order to increase the sensitivity of CT, small iodinated compounds are used as injectable contrast agents. However, the iodinated contrast agents are excreted through the kidney and have short circulation times. This rapid renal clearance not only restricts in vivo applications that require long circulation times but also sometimes induces serious adverse effects related to the excretion pathway. In addition, the X-ray attenuation of iodine is not efficient for clinical CT that uses high-energy X-ray. Due to these limitations, nano-sized iodinated CT contrast agents have been developed that can increase the circulation time and decrease the adverse effects. In addition to iodine, nanoparticles based on heavy atoms such as gold, lanthanides, and tantalum are used as more efficient CT contrast agents. In this review, we summarize the recent progresses made in nano-sized CT contrast agents.

A systematic analysis of peptide linker length and liposomal polyethylene glycol coating on cellular uptake of peptide-targeted liposomes

PEGylated liposomes are attractive pharmaceutical nanocarriers; however, literature reports of ligand-targeted nanoparticles have not consistently shown successful results. Here, we employed a multifaceted synthetic strategy to prepare peptide-targeted liposomal nanoparticles with high purity, reproducibility, and precisely controlled stoichiometry of functionalities to evaluate the role of liposomal PEG coating, peptide EG-linker length, and peptide valency on cellular uptake in a systematic manner. We analyzed these parameters in two distinct disease models where the liposomes were functionalized with either HER2- or VLA-4-antagonistic peptides to target HER2-overexpressing breast cancer cells or VLA-4-overexpressing myeloma cells, respectively. When targeting peptides were tethered to nanoparticles with an EG45 (∼PEG2000) linker in a manner similar to a more traditional formulation, their cellular uptake was not enhanced compared to non-targeted versions regardless of the liposomal PEG coating used. Conversely, reduction of the liposomal PEG to PEG350 and the peptide linker to EG12 dramatically enhanced cellular uptake by ∼9 fold and ∼100 fold in the breast cancer and multiple myeloma cells, respectively. Uptake efficiency reached a maximum and a plateau with ∼2% peptide density in both disease models. Taken together, these results demonstrate the significance of using the right design elements such as the appropriate peptide EG-linker length in coordination with the appropriate liposomal PEG coating and optimal ligand density in efficient cellular uptake of liposomal nanoparticles.

Influence of PEGylation and RGD loading on the targeting properties of radiolabeled liposomal nanoparticles

Purpose

Liposomes have been proposed to be a means of selectively targeting cancer sites for diagnostic and therapeutic applications. The focus of this work was the evaluation of radiolabeled PEGylated liposomes derivatized with varying amounts of a cyclic arginyl–glycyl–aspartic acid (RGD) peptide. RGD peptides are known to bind to α_vβ₃ integrin receptors overexpressed during tumor-induced angiogenesis.

Methods

Several liposomal nanoparticles carrying the RGD peptide targeting sequence (RLPs) were synthesized using a combination of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, cholesterol, diethylenetriaminepentaacetic acid-derivatized lipids for radiolabeling, a polyethylene glycol (PEG) building block, and a lipid-based RGD building block. Relative amounts of RGD and PEG building blocks were varied. In vitro binding affinities were determined using isolated α_vβ₃ integrin receptors incubated with different concentrations of RLPs in competition with iodine-125-labeled cyclo-(-RGDyV-). Binding of the indium-111-labeled RLPs was also evaluated. Biodistribution and micro single photon emission computed tomography/computed tomography imaging studies were performed in nude mice using different tumor xenograft models.

Results

RLPs were labeled with indium-111 with high radiochemical yields. In vitro binding studies of RLPs with different RGD/PEG loading revealed good binding to isolated receptors, which was dependent on the extent of RGD and PEG loading. Binding increased with higher RGD loading, whereas reduced binding was found with higher PEG loading. Biodistribution showed increased circulating time for PEGylated RLPs, but no dependence on RGD loading. Both biodistribution and micro single photon emission computed tomography/computed tomography imaging studies revealed low, nonspecific tumor uptake values.

Conclusion

In this study, RLPs for targeting angiogenesis were described. Even though good binding to α_vβ₃ integrin receptors was found in vitro, the balance between PEGylation and RGD loading clearly requires optimization to achieve targeting in vivo. These data form the basis for future development and provide a platform for the investigation of multimodal approaches.

Superhydrophilic zwitterionic polymers stabilize liposomes

Nonionic polyethylene glycol (PEG) as a stealth polymer destabilizes liposomes due to its amphiphilic property. As a result, PEGylated liposomes have to be further stabilized, such as by using a large amount cholesterol. This is a long existing dilemma faced by PEG. In this work, we show that zwitterionic poly(carboxybetaine) (PCB) stabilizes liposomes because of its superhydrophilic nature, thus solving this dilemma. Specifically, PCB-modified liposomes without cholesterol exhibited good retention of hydrophilic drug and long blood circulating characteristics in vivo. To further validate this new PCB chemistry, PCB liposomal doxorubicin without cholesterol was compared with DOXIL for their antitumor therapeutic efficacies.

Influence of polymer architecture on antigens camouflage, CD47 protection and complement mediated lysis of surface grafted red blood cells

Hyperbranched polyglycerol (HPG) and polyethylene glycol (PEG) polymers with similar hydrodynamic sizes in solution were grafted to red blood cells (RBCs) to investigate the impact of polymer architecture on the cell structure and function. The hydrodynamic sizes of polymers were calculated from the diffusion coefficients measured by pulsed field gradient NMR. The hydration of the HPG and PEG was determined by differential scanning calorimetry analyses. RBCs grafted with linear PEG had different properties compared to the compact HPG grafted RBCs. HPG grafted RBCs showed much higher electrophoretic mobility values than PEG grafted RBCs at similar grafting concentrations and hydrodynamic sizes indicating differences in the structure of the polymer exclusion layer on the cell surface. PEG grafting impacted the deformation properties of the membrane to a greater degree than HPG. The complement mediated lysis of the grafted RBCs was dependent on the type of polymer, grafting concentration and molecular size of grafted chains. At higher molecular weights and graft concentrations both HPG and PEG triggered complement activation. The magnitude of activation was higher with HPG possibly due to the presence of many hydroxyl groups per molecule. HPG grafted RBCs showed significantly higher levels of CD47 self-protein accessibility than PEG grafted RBCs at all grafting concentrations and molecular sizes. PEG grafted polymers provided, in general, a better shielding and protection to ABO and minor antigens from antibody recognition than HPG polymers, however, the compact HPGs provided greater protection of certain antigens on the RBC surface. Our data showed that HPG 20 kDa and HPG 60 kDa grafted RBCs exhibited properties that are more comparable to the native RBC than PEG 5 kDa and PEG 10 kDa grafted RBCs of comparable hydrodynamic sizes. The study shows that small compact polymers such as HPG 20 kDa have a greater potential in the generation of functional RBC for therapeutic delivery applications. The intermediate sized polymers (PEG or HPG) which showed greater antigen camouflage at lower grafting concentrations have significant potential in transfusion as universal red blood donor cells.

Oleanolic acid liposomes with polyethylene glycol modification: promising antitumor drug delivery

BACKGROUND

Oleanolic acid is a pentacyclic triterpene present in many fruits and vegetables, and has received much attention on account of its biological properties. However, its poor solubility and low bioavailability limit its use. The objective of this study was to encapsulate oleanolic acid into nanoliposomes using the modified ethanol injection method.

METHODS

The liposomes contain a hydrophobic oleanolic acid core, an amphiphilic soybean lecithin monolayer, and a protective hydrophilic polyethylene glycol (PEG) coating. During the preparation process, the formulations described were investigated by designing 3⁴ orthogonal experiments as well as considering the effects of different physical characteristics. The four factors were the ratios of drug to soybean phosphatidylcholine (w/w), cholesterol (w/w), PEG-2000 (w/w), and temperature of phosphate-buffered saline at three different levels. We identified the optimized formulation which showed the most satisfactory lipid stability and particle formation. The morphology of the liposomes obtained was determined by transmission electron microscopy and atomic force microscopy. The existence of PEG in the liposome component was validated by Fourier transform infrared spectrum analysis.

RESULTS

The PEGylated liposomes dispersed individually and had diameters of around 110-200 nm. Encapsulation efficiency was more than 85%, as calculated by high-performance liquid chromatography and Sephadex® gel filtration. Furthermore, when compared with native oleanolic acid, the liposomal formulations showed better stability in vitro. Finally, the cytotoxicity of the oleanolic acid liposomes was evaluated using a microtiter tetrazolium assay.

CONCLUSION

These results suggest that PEGylated liposomes would serve as a potent delivery vehicle for oleanolic acid in future cancer therapy.

Investigation on the stability of saquinavir loaded liposomes: implication on stealth, release characteristics and cytotoxicity

Although anti-retroviral therapy is the most efficient disease management strategy for HIV-AIDS, its applications are limited by several factors including the low bioavailability and first pass metabolism of the drugs. Nanocarriers such as liposomes have been developed to circumvent some of these problems. We report here preparation of novel liposome formulations for efficient delivery of anti-retroviral drugs to mammalian cells in culture. The liposomes were prepared and surface was modified using poly (ethylene glycol). Encapsulation efficiency of the anti-retroviral drug saquinavir was found to be approximately 33% and also exhibited sustained release of the drug. Although PEGylated liposomes were more stable in protein-supplemented media, had better colloidal stability and exhibited lesser sonochemical stability due to lower cavitation threshold. The cell viability studies using Jurkat T-cells revealed that the PEGylated liposomes loaded with saquinavir were less cytotoxic as compared to the non-PEGylated liposomes or free drug confirming the potential of the liposomes as a sustained drug-release system. The drug delivery potential of the liposomes loaded with Alexa flour 647 was evaluated using Jurkat T-cells and flow cytometry showing uptake upto 74%. Collectively, our data demonstrate efficient targeting of mammalian cells using novel liposome formulations with insignificant levels of cytotoxicity.

Spectroscopic studies on interactions between cholesterol-end capped polyethylene glycol and liposome

In order to confirm that the cholesterol end groups of cholesterol-end capped polyethylene glycol really insert into the liposome bilayer and investigate how the incorporation affects the microenvironment of liposome bilayer, two kinds of molecular probes, namely Nile Red and pinacyanol chloride, were used. Their UV-visible and fluorescence spectrum were recorded before and after the addition of the polymer. Shifts of the maximum absorbance (λ(max)) of Nile Red show that the bilayer microenvironment around Nile Red is becoming more polar with increasing polymer concentration while shifts of λ(max) of pinacyanol chloride indicate that the surrounding environment of pinacyanol chloride is becoming more apolar with addition of polymer. Effect of composition of liposome was also studied. With high ratio of dimethyldioctadecylammonium bromide (DODAB) fraction in liposome, λ(max) of Nile Red is more easily affected by the addition of Chol-PEG-Chol while liposome with cholesterol shows relatively high stability to the addition of Chol-PEG-Chol.

Doxil®--the first FDA-approved nano-drug: lessons learned

Doxil®, the first FDA-approved nano-drug (1995), is based on three unrelated principles: (i) prolonged drug circulation time and avoidance of the RES due to the use of PEGylated nano-liposomes; (ii) high and stable remote loading of doxorubicin driven by a transmembrane ammonium sulfate gradient, which also allows for drug release at the tumor; and (iii) having the liposome lipid bilayer in a "liquid ordered" phase composed of the high-T(m) (53 °C) phosphatidylcholine, and cholesterol. Due to the EPR effect, Doxil is "passively targeted" to tumors and its doxorubicin is released and becomes available to tumor cells by as yet unknown means. This review summarizes historical and scientific perspectives of Doxil development and lessons learned from its development and 20 years of its use. It demonstrates the obligatory need for applying an understanding of the cross talk between physicochemical, nano-technological, and biological principles. However, in spite of the large reward, ~2 years after Doxil-related patents expired, there is still no FDA-approved generic "Doxil" available.

Recent advances in stealth coating of nanoparticle drug delivery systems

Modifying surfaces of nanoparticles (NPs) with polyethylene glycol (PEG), the so-called PEGylation, is the most commonly used method for reducing premature clearance of NPs from the circulation. However, several reports point out that PEGylation may negatively influence the performance of NPs as a drug carrier. Alternative surface modification strategies, including substitute polymers, conditional removal of PEG, and biomimetic surface modification, may provide solutions for the limitations of PEG.

Polymeric micelles of PEG-PE as carriers of all-trans retinoic acid for stability improvement

The topical application of all-trans retinoic acid (ATRA) is an effective treatment for several skin disorders, including photo-aging. Unfortunately, ATRA is susceptible to light, heat, and oxidizing agents. Thus, this study aimed to investigate the ability of polymeric micelles prepared from polyethylene glycol conjugated phosphatidylethanolamine (PEG-PE) to stabilize ATRA under various storage conditions. ATRA entrapped in polymeric micelles with various PEG and PE structures was prepared. The critical micelle concentrations were 97-243 μM, depending on the structures of the PEG and PE molecules. All of the micelles had particle diameters of 6-20 nm and neutral charges. The highest entrapment efficiency (82.7%) of the tested micelles was exhibited by ATRA in PEG with a molecular weight of 750 Da conjugated to dipalmitoyl phosphatidylethanolamine (PEG(750)-DPPE) micelles. The PEG(750)-DPPE micelle could significantly retard ATRA oxidation compared to ATRA in 75% methanol/HBS solution. Up to 87% of ATRA remained in the PEG(750)-DPPE micelle solution after storage in ambient air for 28 days. This result suggests that PEG(750)-DPPE micelle can improve ATRA stability. Therefore, ATRA in PEG(750)-DPPE micelle is an interesting alternative structure for the development of cosmeceutical formulations.

Amphiphilic micelles of poly(2-methyl-2-carboxytrimethylene carbonate-co-D,L-lactide)-graft-poly(ethylene glycol) for anti-cancer drug delivery to solid tumours

Drug delivery to solid tumours remains a challenge because both tumour physiology and drug solubility are unfavourable. Engineered materials can provide the basis for drug reformulation, incorporating active compounds and modulating their pharmacokinetic and biodistribution behaviour. To this end, we encapsulated docetaxel, a poorly soluble taxane drug, in a self-assembled polymeric nanoparticle micelle of poly(2-methyl-2-carboxytrimethylene carbonate-co-D,L-lactide)-graft-poly(ethylene glycol) (poly(TMCC-co-LA)-g-PEG). This formulation was compared with its conventional ethanolic polysorbate 80 formulation in terms of plasma circulation and biodistribution in an orthotopic mouse model of breast cancer. Notably, the polymeric nanoparticle formulation achieved greater tumour retention, resulting in prolonged exposure of cancer cells to the active drug. This behaviour was unique to the tumour tissue. The active drug was eliminated at equal or greater rates in all other tissues assayed when delivered in the polymeric nanoparticles vs. the free drug formulation. Thus, these polymeric nanoparticles are promising vehicles for solid tumour drug delivery applications, offering greater tumour exposure while eliminating the need for toxic solvents and surfactants in the dosing formulation.

Development and characterization of immuno-nanocarriers targeting the cancer stem cell marker AC133

In the context of targeted therapy, we addressed the possibility of developing a drug delivery nanocarrier capable to specifically reach cancer cells that express the most prominent marker associated with cancer stem cell (CSC) phenotype, AC133. For this purpose, 100nm lipid nanocapsules (LNCs) were functionalized with a monoclonal antibody (mAb) directed against AC133 according to two distinct methods: firstly, post-insertion within 100nm LNCs of a lipid poly(ethylene glycol) functionalized with reactive-sulfhydryl maleimide groups (DSPE-PEG(2000)-maleimide) followed by thiolated mAb coupling, and, secondly, creation of a thiolated lipo-immunoglobulin between DSPE-PEG(2000)-maleimide and AC133, then post-inserted within LNCs. Due to the reduced number of purification steps, lower amounts of DSPE-PEG(2000)-maleimide that were necessary as well as lower number of free maleimide functions present onto the surface of immuno-LNC, the second method was found to be more appropriate. Thus, 126nm AC133-LNC with a zeta potential of -22mV while keeping a narrow distribution were developed. Use of the IgG1κ isotype control-immunoglobulins produced similar control IgG1-LNCs. Micro-Bradford colorimetric assay indicated a fixation of about 40 immunoglobulins per LNC. Use of human Caco-2 cells that constitutively express AC133 (Caco-2-AC133(high)) allowed addressing the behavior of the newly functionalized immuno-LNCs. siRNA knockown strategy permitted to obtain Caco-2-AC133(low) for comparison. Immunofluorescence-combined flow cytometry analysis demonstrated that the epitope-recognition function of AC133 antibody was preserved when present on immuno-LNCs. Although grafting of immunoglobulins onto the surface of LNCs repressed their internalization within Caco-2 cells as evaluated by flow cytometry, AC133-specific cellular binding was obtained with AC133-LNC as assessed by computer-assisted fluorescence microscopy. In conclusion, interest of AC133-LNCs as niche carriers is discussed toward the development of CSC targeted chemo- or radio-nanomedicines.

Enhanced siRNA delivery into cells by exploiting the synergy between targeting ligands and cell-penetrating peptides

We have developed a polymer nanoparticle-based siRNA delivery system that exploits a cell surface binding synergism between targeting ligands and cell-penetrating peptides. Nanoparticles were coated with folate and penetratin via a PEGylated phospholipid linker (DSPE-PEG): the combination of both of these ligands represents a strategy for enhancing intracellular delivery of attached polymer nanoparticles. Nanoparticles were characterized for size, morphology, density of surface modification, and ligand association and retention. The surface coverage achieved on DSPE-PEG-coated nanoparticles is as high as (or higher than) obtained with other ligand-modified nano-scale particulate systems (∼0.5-5 pmol ligand/cm²). Additionally, these nanoparticles were loaded with a high density of siRNA (∼130-140 pmol siRNA/mg nanoparticles), which is slowly released upon incubation in water. Synergies between the activity of surface binding and cell internalizing ligands on these siRNA-loaded nanoparticles impart delivery enhancements that improve their gene silencing efficacy both in culture and in tumor models. Traditionally, targeting ligands function by binding to cell surface receptors, while cell-penetrating peptides function by nonspecifically transporting across cell membranes. Interestingly, we have observed that improved delivery of these dual-functionalized nanoparticles was in part, a result of increased cell surface avidity afforded by both ligands. This siRNA delivery system presents an approach to surface modification of nanovehicles, in which multiple ligands function in parallel to enhance cell binding and uptake.

Use of simple kinetic and reaction-order measurements for the evaluation of the mechanism of surfactant-liposome interactions

Surfactant-liposome interactions have been previously studied through different methods and techniques. We present here a classical physical chemistry study on liposome solutions added to destabilizing agents at concentrations well above the solubilization concentration, which enable us to draw useful and interesting conclusions about the mechanism of surfactant-induced liposomal breakdown by simply exploiting the kinetics and the reaction order of the liposomal content release. In such excess of surfactant, the mechanism of surfactant-induced rupture of the liposomes has been demonstrated to be different from that proposed for low surfactant concentrations. Thus, depending on the surfactant concentration, two prevailing processes have been evidenced: (i) a cooperative mechanism that implies the assembly of a critical number of surfactant molecules to trigger the formation of a channel and therefore the release of the liposomal content and (ii) a mechanism driven by direct interaction of the surfactant molecules with the lipids that causes the complete solubilization of the liposomes. The former mechanism occurs at low surfactant concentrations, whereas the latter occurs at higher concentrations and above the CMC of the surfactants. The effect of different guests embedded into the liposomal bilayer on the mechanism of surfactant-induced liposomal breakdown has been compared by using the second-order rate constants measured for the liposome breakdown process.

Multicomponent folate-targeted magnetoliposomes: design, characterization, and cellular uptake

Folate-targeted cationic magnetoliposomes (FTMLs) have been prepared with coencapsulated doxorubicin (DOX) and anionic superparamagnetic iron oxide (SPIO) nanoparticles (NPs) with 5 nm γ-Fe(2)O(3) cores and 16 nm hydrodynamic diameters. NP encapsulation (89%) was confirmed by cryogenic transmission electron microscopy (TEM), and the presence of the oppositely charged NPs did not cause liposome aggregation. The FTMLs had an average diameter of 174 ± 53 nm and existed as unilamellar and cup-shaped liposomes, which was attributed to dissimilar lipid packing parameters and the presence of PEG-lipids. A 3-fold increase in DOX release was achieved over 2 hours when the encapsulated SPIO NPs were heated by an alternating current electromagnetic field operating at radio frequencies (RF). Results with human cervical cancer cells (HeLa), which have been shown to exhibit high folate receptor (FR) expression, confirmed FTML surface binding and cellular uptake. In contrast, no uptake was observed for lower FR-expressing human breast carcinoma cells (ZR-75-1).

FROM THE CLINICAL EDITOR

This study discusses the design and cellular uptake of multifunctional folate-targeted cationic magnetoliposomes enabling doxorubicin delivery and SPIO labeling.

In vitro and in vivo characterizations of PEGylated liposomal doxorubicin

One challenge in developing a nanoparticle drug-delivery system is understanding the critical physicochemical properties that may impact its in vivo performance and establishing analytical techniques that can adequately characterize in vitro and in vivo properties. Doxil®/Caelyx®, a PEGylated liposomal doxorubincin (PLD), is one of the leading approved nanoparticle product used in cancer therapy. In this review, we use PLD as an example to illustrate identification of key in vitro and in vivo characteristics. The following characteristics, including liposome composition, state of encapsulated drug, internal environment of liposome, liposome size distribution, lamellarity, grafted polyethylene glycol at the liposome surface, electrical surface potential or charge, and in vitro leakage, are considered critical to demonstrate the supramolecular structure of PLD and ensure consistent drug delivery to cancer tissues. Corresponding analytical techniques are discussed to determine these liposome characteristics. Furthermore, in vivo stability of the PLD can be determined by plasma pharmacokinetics of both free and liposome-encapsulated drug. A better understanding of the critical in vitro and in vivo liposome characteristics together with improvements in analytical technology will enable generic liposome product development and ensure liposome product quality.

Thermodynamics of lipid interactions with cell-penetrating peptides

Cationic peptides are efficiently taken up by biological cells through different pathways, which can be exploited for delivery of intracellular drugs. For example, their endocytosis is known since 1967, and this typically produces entrapment of the peptides in endocytotic vesicles. The resulting peptide (and cargo) degradation in lysosomes is of little therapeutic interest. Beside endocytosis (and various subtypes thereof), cationic cell-penetrating peptides (CPPs) may also gain access to cytosol and nucleus of livings cells. This process is known since 1988, but it is poorly understood whether the cytosolic CPP appearance requires an active cellular machinery with membrane proteins and signaling molecules, or whether this translocation occurs by passive diffusion and thus can be mimicked with model membranes devoid of proteins or glycans. In the present chapter, protocols are presented that allow for testing the membrane binding and disturbance of CPPs on model membranes with special focus on particular CPP properties. Protocols include vesicle preparation, lipid quantification, and analysis of membrane leakage, lipid polymorphism ((31)P NMR), and membrane binding (isothermal titration calorimetry). Using these protocols, a major difference among CPPs is observed: At low micromolar concentration, nonamphipathic CPPs, such as nona-arginine (WR(9)) and penetratin, have only a poor affinity for model membranes with a lipid composition typical of eukaryotic membranes. No membrane leakage is induced by these compounds at low micromolar concentration. In contrast, their amphipathic derivatives, such as acylated WR(9) (C(14), C(16), C(18)) or amphipathic penetratin mutant p2AL (Drin et al., Biochemistry 40:1824-1834, 2001), bind and disturb lipid model membranes already at low micromolar peptide concentration. This suggests that the mechanism for cytosolic CPP delivery (and potential toxicity) differs among CPPs despite their common name.

Fine-tuning of POPC liposomal leakage by the use of beta-cyclodextrin and several hydrophobic guests

The effect of entrapped beta-cyclodextrin (beta-CD) on the stability of multilamellar vesicles (MLVs) of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), prepared by the dehydration-rehydration method, was studied by monitoring the release of 5(6)-carboxyfluorescein encapsulated into the liposomes. Different hydrophobic guests, such as Fullerene C(60), have been incorporated into the POPC bilayer in order to modify the membrane composition. The kinetic results as well as ESI-MS measurements evidenced that the destabilizing activity of beta-CD is due to the formation of beta-CD inclusion complexes and the consequent removal of selected bilayer constituents from the liposomal membrane. Hence, when beta-CD was added to the liposomes in the form of a strong, water-soluble 2:1 beta-CD/C(60) inclusion complex, such a destabilizing effect was not observed. However, the same beta-CD/C(60) inclusion complex does not form as a result of C(60) extraction from the bilayer. This may be attributed either to the overwhelming concentration of POPC with respect to C(60) and/or to the fact that C(60) is largely aggregated in the bilayer. Turbidimetric and fluorimetric determinations of lamellarity and entrapped volume of the studied MLVs provided further evidence of the alteration of the liposomal bilayer as a consequence of the addition of beta-CD and/or the presence of the studied guests.