The adsorption of a bacterial cellulase and its two isolated domains to crystalline cellulose

Dimension, shape, and conformational flexibility of a two domain fungal cellulase in solution probed by small angle X-ray scattering

Cellulase Cel45 from Humicola insolens has a modular structure with a catalytic module and a cellulose-binding module (CBM) separated by a 36 amino acid, glycosylated, linker peptide. The solution conformation of the entire two domain Cel45 protein as well as the effect of the length and flexibility of the linker on the spatial arrangement of the constitutive modules were studied by small angle x-ray scattering combined with the known three-dimensional structure of the individual modules. The measured dimensions of the enzyme show that the linker exhibits an extended conformation leading to a maximum extension between the two centers of mass of each module corresponding to about four cellobiose units on a cellulose chain. The glycosylation of the linker is the key factor defining its extended conformation, and a five proline stretch mutation on the linker was found to confer a higher rigidity to the enzyme. Our study shows that the respective positioning of the catalytic module and the CBM onto the insoluble substrate is most likely influenced by the linker structure and flexibility. Our results are consistent with a model where cellulases can move on the surface of cellulose with a caterpillar-like displacement with free energy restrictions.

Microbial cellulose utilization: fundamentals and biotechnology

Fundamental features of microbial cellulose utilization are examined at successively higher levels of aggregation encompassing the structure and composition of cellulosic biomass, taxonomic diversity, cellulase enzyme systems, molecular biology of cellulase enzymes, physiology of cellulolytic microorganisms, ecological aspects of cellulase-degrading communities, and rate-limiting factors in nature. The methodological basis for studying microbial cellulose utilization is considered relative to quantification of cells and enzymes in the presence of solid substrates as well as apparatus and analysis for cellulose-grown continuous cultures. Quantitative description of cellulose hydrolysis is addressed with respect to adsorption of cellulase enzymes, rates of enzymatic hydrolysis, bioenergetics of microbial cellulose utilization, kinetics of microbial cellulose utilization, and contrasting features compared to soluble substrate kinetics. A biological perspective on processing cellulosic biomass is presented, including features of pretreated substrates and alternative process configurations. Organism development is considered for "consolidated bioprocessing" (CBP), in which the production of cellulolytic enzymes, hydrolysis of biomass, and fermentation of resulting sugars to desired products occur in one step. Two organism development strategies for CBP are examined: (i) improve product yield and tolerance in microorganisms able to utilize cellulose, or (ii) express a heterologous system for cellulose hydrolysis and utilization in microorganisms that exhibit high product yield and tolerance. A concluding discussion identifies unresolved issues pertaining to microbial cellulose utilization, suggests approaches by which such issues might be resolved, and contrasts a microbially oriented cellulose hydrolysis paradigm to the more conventional enzymatically oriented paradigm in both fundamental and applied contexts.

The fibronectin type 3-like repeat from the Clostridium thermocellum cellobiohydrolase CbhA promotes hydrolysis of cellulose by modifying its surface

Fibronectin type 3 homology domains (Fn3) as found in the cellobiohydrolase CbhA of Clostridium thermocellum are common among bacterial extracellular glycohydrolases. The function of these domains is not clear. CbhA is modular and composed of an N-terminal family IV carbohydrate-binding domain (CBDIV), an immunoglobulin-like domain, a family 9 glycosyl hydrolase catalytic domain (Gh9), two Fn3-like domains (Fn3(1,2)), a family III carbohydrate-binding domain (CBDIII), and a dockerin domain. Efficiency of cellulose hydrolysis by truncated forms of CbhA increased in the following order: Gh9 (lowest efficiency), Gh9-Fn3(1,2) (more efficient), and Gh9-Fn3(1,2)-CBDIII (greatest efficiency). Thermostability of the above constructs decreased in the following order: Gh9 (most stable), Gh9-Fn3(1,2), and then Gh9-Fn3(1,2)-CBDIII (least stable). Mixing of Orpinomyces endoglucanase CelE with Fn3(1,2,) or Fn3(1,2)-CBDIII increased efficiency of hydrolysis of acid-swollen cellulose (ASC) and filter paper. Scanning electron microscopic studies of filter paper treated with Fn3(1,2), Fn3(1,2)-CBDIII, or CBDIII showed that the surface of the cellulose fibers had been loosened up and crenellated by Fn3(1,2) and Fn3(1,2)-CBDIII and to a lesser extent by CBDIII. X-ray diffraction analysis did not reveal changes in the crystallinity of the filter paper. CBDIII bound to ASC and filter paper with capacities of 2.45 and 0.73 micro moles g(-1) and relative affinities (K(r)) of 1.12 and 2.13 liters g(-1), respectively. Fn3(1,2) bound weakly to both celluloses. Fn3(1,2)-CBD bound to ASC and filter paper with capacities of 3.22 and 0.81 micro moles g(-1) and K(r)s of 1.14 and 1.98 liters g(-1), respectively. Fn3(1,2) and CBDIII contained 2 and 1 mol of calcium per mol, respectively. The results suggest that Fn3(1,2) aids the hydrolysis of cellulose by modifying its surface. This effect is enhanced by the presence of CBDIII, which increases the concentration of Fn3(1,2) on the cellulose surface.

A novel carbohydrate-binding protein is a component of the plant cell wall-degrading complex of Piromyces equi

The recycling of photosynthetically fixed carbon by the action of microbial plant cell wall hydrolases is a fundamental biological process that is integral to one of the major geochemical cycles and, in addition, has considerable industrial potential. Enzyme systems that attack the plant cell wall contain noncatalytic carbohydrate-binding modules (CBMs) that mediate attachment to this composite structure and play a pivotal role in maximizing the hydrolytic process. Anaerobic fungi that colonize herbivores are the most efficient plant cell wall degraders known, and this activity is vested in a high molecular weight complex that binds tightly to the plant cell wall. To investigate whether plant cell wall attachment is mediated by noncatalytic proteins, a cDNA library of the anaerobic fungus Piromyces equi was screened for sequences that encode noncatalytic proteins that are components of the cellulase-hemicellulase complex. A 1.6-kilobase cDNA was isolated encoding a protein of 479 amino acids with a M(r) of 52548 designated NCP1. The mature protein had a modular architecture comprising three copies of the noncatalytic dockerin module that targets anaerobic fungal proteins to the cellulase-hemicellulase complex. The two C-terminal modules of NCP1, CBM29-1 and CBM29-2, respectively, exhibit 33% sequence identity with each other but have no homologues in protein data bases. A truncated form of NCP1 comprising CBM29-1 and CBM29-2 (CBM29-1-2) and each of the two individual copies of CBM29 bind primarily to mannan, cellulose, and glucomannan, displaying the highest affinity for the latter polysaccharide. CBM29-1-2 exhibits 4-45-fold higher affinity than either CBM29-1 or CBM29-2 for the various ligands, indicating that the two modules, when covalently linked, act in synergy to bind to an array of different polysaccharides. This paper provides the first report of a CBM-containing protein from an anaerobic fungal cellulase-hemicellulase complex. The two CBMs constitute a novel CBM family designated CBM29 whose members exhibit unusually wide ligand specificity. We propose, therefore, that NCP1 plays a role in sequestering the fungal enzyme complex onto the plant cell wall.

Binding specificity and thermodynamics of a family 9 carbohydrate-binding module from Thermotoga maritima xylanase 10A

The C-terminal family 9 carbohydrate-binding module of xylanase 10A from Thermotoga maritima (CBM9-2) binds to amorphous cellulose, crystalline cellulose, and the insoluble fraction of oat spelt xylan. The association constants (K(a)) for adsorption to insoluble polysaccharides are 1 x 10(5) to 3 x 10(5) M(-1). Of the soluble polysaccharides tested, CBM9-2 binds to barley beta-glucan, xyloglucan, and xylan. CBM9-2 binds specifically to the reducing ends of cellulose and soluble polysaccharides, a property that is currently unique to this CBM. CBM9-2 also binds glucose, xylose, galactose, arabinose, cellooligosaccharides, xylooligosaccharides, maltose, and lactose, with affinities ranging from 10(3) M(-1) for monosaccharides to 10(6) M(-1) for disaccharides and oligosaccharides. Cellooligosaccharides longer than two glucose units do not bind with improved affinity, indicating that cellobiose is sufficient to occupy the entire binding site. In general, the binding reaction is dominated by favorable changes in enthalpy, which are partially compensated by unfavorable entropy changes.

Cellulose-binding modules from extracellular matrix proteins of Dictyostelium discoideum stalk and sheath

Cellulose-binding modules (CBMs) of two extracellular matrix proteins, St15 and ShD, from the slime mold Dictyostelium discoideum were expressed in Escherichia coli. The expressed proteins were purified to > 98% purity by extracting inclusion bodies at pH 11.5 and refolding proteins at pH 7.5. The two refolded CBMs bound tightly to amorphous phosphoric acid swollen cellulose (PASC), but had a low affinity toward xylan. Neither protein exhibited cellulase activity. St15, the stalk-specific protein, had fourfold higher binding affinity toward microcrystalline cellulose (Avicel) than the sheath-specific ShD CBM. St15 is unusual in that it consists of a solitary CBM homologous to family IIa CBMs. Sequence analysis of ShD reveals three putative domains containing: (a) a C-terminal CBM homologous to family IIb CBMs; (b) a Pro/Thr-rich linker domain; and (c) a N-terminal Cys-rich domain. The biological functions and potential role of St15 and ShD in building extracellular matrices during D. discoideum development are discussed.

Mechanisms of wood degradation by brown-rot fungi: chelator-mediated cellulose degradation and binding of iron by cellulose

Iron, hydrogen peroxide, biochelators and oxalate are believed to play important roles in cellulose degradation by brown-rot fungi. The effect of these compounds in an 'enhanced' Fenton system on alpha-cellulose degradation was investigated specifically in regard to molecular weight distribution and cellulose-iron affinity. This study shows that the degradative ability of an ultrafiltered low molecular weight preparation of chelating compounds isolated from the brown-rot fungus Gloeophyllum trabeum (termed 'Gt chelator') increased with increasing Gt chelator concentration when the FeIII to Gt chelator ratio was greater than about 30:1. When this ratio was less than 30:1, increasing Gt chelator concentration did not accelerate cellulose degradation. In excess hydrogen peroxide, cellulose degradation increased and then decreased with increasing iron concentration when FeIII was present in excess of the Gt chelator. The critical ratio of FeIII to Gt chelator varied depending on the concentration of hydrogen peroxide in the system. Increasing iron concentration above a critical iron:chelator ratio inhibited cellulose degradation. The optimum pH for cellulose degradation mediated by Gt chelator was around 4.0. A comparison of the effects of 2,3-DHBA (a chelator that reduces iron similarly to Gt chelator) and Gt chelator with respect to cellulose degradation demonstrated the same pattern of cellulose degradation. Cellulose-iron affinity studies were conducted at three pH levels (3.6, 3.8, 4.1), and the binding constants for cellulose-FeIII, cellulose-FeII and cellulose-FeIII in the presence of Gt chelator were calculated. The binding constants for cellulose-FeIII at all three pH levels were much higher than those for cellulose-FeII, and the binding constants for cellulose-FeIII in the presence of Gt chelator were very close to those for cellulose-FeII. This is probably the result of FeIII reduction to FeII by Gt chelator and suggests that chelators from the fungus may be able to sequester iron from cellulose and reduce it in near proximity to the cellulose and thereby better promote depolymerization. The free radical generating system described has potential for use in a variety of industrial processing and pollution control applications.

A family 2a carbohydrate-binding module suitable as an affinity tag for proteins produced in Pichia pastoris

The family 2a carbohydrate-binding module (CBM), Cel5ACBM2a, from the C-terminus of Cel5A from Cellulomonas fimi, and Xyn10ACBM2a, the family 2a CBM from the C-terminus of Xyn10A from C. fimi, were compared as fusion partners for proteins produced in the methylotrophic yeast Pichia pastoris. Gene fusions of murine stem-cell factor (SCF) with both CBMs were expressed in P. pastoris. The secreted SCF-Xyn10ACBM2a polypeptides were highly glycosylated and bound poorly to cellulose. In contrast, fusion of SCF to Cel5ACBM2a, which lacks potential N-linked glycosylation sites, resulted in the production of polypeptides which bound tightly to cellulose. Cloning and expression of these CBM2a in P. pastoris without a fusion partner confirmed that N-linked glycosylation at several sites was responsible for the poor cellulose binding. The nonglycosylated CBMs produced in E. coli had very similar cellulose-binding properties.

Properties and mutation analysis of the CelK cellulose-binding domain from the Clostridium thermocellum cellulosome

The family IV cellulose-binding domain of Clostridium thermocellum CelK (CBD(CelK)) was expressed in Escherichia coli and purified. It binds to acid-swollen cellulose (ASC) and bacterial microcrystalline cellulose (BMCC) with capacities of 16.03 and 3.95 micromol/g of cellulose and relative affinities (K(r)) of 2.33 and 9.87 liters/g, respectively. The CBD(CelK) is the first representative of family IV CBDs to exhibit an affinity for BMCC. The CBD(CelK) also binds to the soluble polysaccharides lichenin, glucomannan, and barley beta-glucan, which are substrates for CelK. It does not bind to xylan, galactomannan, and carboxymethyl cellulose. The CBD(CelK) contains 1 mol of calcium per mol. The CBD(CelK) has three thiol groups and one disulfide, reduction of which results in total loss of cellulose-binding ability. To reveal amino acid residues important for biological function of the domain and to investigate the role of calcium in the CBD(CelK) four highly conserved aromatic residues (Trp(56), Trp(94), Tyr(111), and Tyr(136)) and Asp(192) were mutated into alanines, giving the mutants W56A, W94A, Y111A, Y136A, and D192A. In addition 14 N-terminal amino acids were deleted, giving the CBD-N(CelK). The CBD-N(CelK) and D192A retained binding parameters close to that of the intact CBD(CelK), W56A and W94A totally lost the ability to bind to cellulose, Y136A bound to both ASC and BMCC but with significantly reduced binding capacity and K(r) and Y111A bound weakly to ASC and did not bind to BMCC. Mutations of the aromatic residues in the CBD(CelK) led to structural changes revealed by studying solubility, circular-dichroism spectra, dimer formation, and aggregation. Calcium content was drastically decreased in D192A. The results suggest that Asp192 is in the calcium-binding site of the CBD(CelK) and that calcium does not affect binding to cellulose. The 14 amino acids from the N terminus of the CBD(CelK) are not important for binding. Tyr136, corresponding to Cellulomonas fimi CenC CBD(N1) Y85, located near the binding cleft, might be involved in the formation of the binding surface, while Y111, W56A, and W94A are essential for the binding process by keeping the CBD(CelK) correctly folded.

Evidence for synergy between family 2b carbohydrate binding modules in Cellulomonas fimi xylanase 11A

Glycoside hydrolases often contain multiple copies of noncatalytic carbohydrate binding modules (CBMs) from the same or different families. Currently, the functional importance of this complex molecular architecture is unclear. To investigate the role of multiple CBMs in plant cell wall hydrolases, we have determined the polysaccharide binding properties of wild type and various derivatives of Cellulomonas fimi xylanase 11A (Cf Xyn11A). This protein, which binds to both cellulose and xylan, contains two family 2b CBMs that exhibit 70% sequence identity, one internal (CBM2b-1), which has previously been shown to bind specifically to xylan and the other at the C-terminus (CBM2b-2). Biochemical characterization of CBM2b-2 showed that the module bound to insoluble and soluble oat spelt xylan and xylohexaose with K(a) values of 5.6 x 10(4), 1.2 x 10(4), and 4.8 x 10(3) M(-1), respectively, but exhibited extremely weak affinity for cellohexaose (<10(2) M(-1)), and its interaction with insoluble cellulose was too weak to quantify. The CBM did not interact with soluble forms of other plant cell wall polysaccharides. The three-dimensional structure of CBM2b-2 was determined by NMR spectroscopy. The module has a twisted "beta-sandwich" architecture, and the two surface exposed tryptophans, Trp 570 and Trp 602, which are in a perpendicular orientation with each other, were shown to be essential for ligand binding. In addition, changing Arg 573 to glycine altered the polysaccharide binding specificity of the module from xylan to cellulose. These data demonstrate that the biochemical properties and tertiary structure of CBM2b-2 and CBM2b-1 are extremely similar. When CBM2b-1 and CBM2b-2 were incorporated into a single polypeptide chain, either in the full-length enzyme or an artificial construct comprising both CBM2bs covalently joined via a flexible linker, there was an approximate 18-20-fold increase in the affinity of the protein for soluble and insoluble xylan, as compared to the individual modules, and a measurable interaction with insoluble acid-swollen cellulose, although the K(a) (approximately 6.0 x 10(4) M(-1)) was still much lower than for insoluble xylan (K(a) = approximately 1.0 x 10(6) M(-1)). These data demonstrate that the two family 2b CBMs of Cf Xyn11A act in synergy to bind acid swollen cellulose and xylan. We propose that the increased affinity of glycoside hydrolases for polysaccharides, through the synergistic interactions of CBMs, provides an explanation for the duplication of CBMs from the same family in some prokaryotic cellulases and xylanases.

The structural basis for the ligand specificity of family 2 carbohydrate-binding modules

The interactions of proteins with polysaccharides play a key role in the microbial hydrolysis of cellulose and xylan, the most abundant organic molecules in the biosphere, and are thus pivotal to the recycling of photosynthetically fixed carbon. Enzymes that attack these recalcitrant polymers have a modular structure comprising catalytic modules and non-catalytic carbohydrate-binding modules (CBMs). The largest prokaryotic CBM family, CBM2, contains members that bind cellulose (CBM2a) and xylan (CBM2b), respectively. A possible explanation for the different ligand specificity of CBM2b is that one of the surface tryptophans involved in the protein-carbohydrate interaction is rotated by 90 degrees compared with its position in CBM2a (thus matching the structure of the binding site to the helical secondary structure of xylan), which may be promoted by a single amino acid difference between the two families. Here we show that by mutation of this single residue (Arg-262-->Gly), a CBM2b xylan-binding module completely loses its affinity for xylan and becomes a cellulose-binding module. The structural effect of the mutation has been revealed using NMR spectroscopy, which confirms that Trp-259 rotates 90 degrees to lie flat against the protein surface. Except for this one residue, the mutation only results in minor changes to the structure. The mutated protein interacts with cellulose using the same residues that the wild-type CBM2b uses to interact with xylan, suggesting that the recognition is of the secondary structure of the polysaccharide rather than any specific recognition of the absence or presence of functional groups.

Specificity and affinity of substrate binding by a family 17 carbohydrate-binding module from Clostridium cellulovorans cellulase 5A

The C-terminal carbohydrate-binding module (CBM17) from Clostridium cellulovorans cellulase 5A is a beta-1,4-glucan binding module with a preference for soluble chains. CBM17 binds to phosphoric acid swollen Avicel (PASA) and Avicel with association constants of 2.9 (+/-0.2) x 10(5) and 1.6 (+/-0.2) x 10(5) M(-1), respectively. The capacity values for PASA and Avicel were 11.9 and 0.4 micromol/g of cellulose, respectively. CBM17 did not bind to crystalline cellulose. CBM17 bound tightly to soluble barley beta-glucan and the derivatized celluloses HEC, EHEC, and CMC. The association constants for binding to barley beta-glucan, HEC, and EHEC were approximately 2.0 x 10(5) M(-1). Significant binding affinities were found for cello-oligosaccharides greater than three glucose units in length. The affinities for cellotriose, cellotetraose, cellopentaose, and cellohexaose were 1.2 (+/-0.3) x 10(3), 4.3 (+/-0.4) x 10(3), 3.8 (+/-0.1) x 10(4), and 1.5 (+/-0.0) x 10(5) M(-1), respectively. Fluorescence quenching studies and N-bromosuccinimide modification indicate the participation of tryptophan residues in ligand binding. The possible architecture of the ligand-binding site is discussed in terms of its binding specificity, affinity, and the participation of tryptophan residues.

Cellulose-binding domains promote hydrolysis of different sites on crystalline cellulose

The cohesin-dockerin interaction in Clostridium thermocellum cellulosome mediates the tight binding of cellulolytic enzymes to the cellulosome-integrating protein CipA. Here, this interaction was used to study the effect of different cellulose-binding domains (CBDs) on the enzymatic activity of C. thermocellum endoglucanase CelD (1,4-beta-d endoglucanase, EC) toward various cellulosic substrates. The seventh cohesin domain of CipA was fused to CBDs originating from the Trichoderma reesei cellobiohydrolases I and II (CBD(CBH1) and CBD(CBH2)) (1,4-beta-d glucan-cellobiohydrolase, EC), from the Cellulomonas fimi xylanase/exoglucanase Cex (CBD(Cex)) (beta-1,4-d glucanase, EC), and from C. thermocellum CipA (CBD(CipA)). The CBD-cohesin hybrids interacted with the dockerin domain of CelD, leading to the formation of CelD-CBD complexes. Each of the CBDs increased the fraction of cellulose accessible to hydrolysis by CelD in the order CBD(CBH1) < CBD(CBH2) approximately CBD(Cex) < CBD(CipA). In all cases, the extent of hydrolysis was limited by the disappearance of sites accessible to CelD. Addition of a batch of fresh cellulose after completion of the reaction resulted in a new burst of activity, proving the reversible binding of the intact complexes despite the apparent binding irreversibility of some CBDs. Furthermore, burst of activity also was observed upon adding new batches of CelD-CBD complexes that contained a CBD differing from the first one. This complementation between different CBDs suggests that the sites made available for hydrolysis by each of the CBDs are at least partially nonoverlapping. The only exception was CBD(CipA), whose sites appeared to overlap all of the other sites.

Effects of agitation level on the adsorption, desorption, and activities on cotton fabrics of full length and core domains of EGV (Humicola insolens) and CenA (Cellulomonas fimi)

The activities (at pH 7 and 50 degrees C) of purified EGV (Humicola insolens) and CenA (Cellulomonas fimi) were determined on cotton fabrics at high and low levels of mechanical agitation. Similar activity measurements were also made by using the core domains of these cellulases. Activity experiments suggested that the presence of cellulose binding domains (CBDs) is not essential for cellulase performance in the textile processes, where high levels of mechanical agitation are applied. The binding reversibilities of these cellulases and their cores were studied by dilution of the treatment liquor after equilibrium adsorption. EGV showed low percentage of adsorption under both levels of agitation. It was observed that the adsorption/desorption processes of cellulases are enhanced by higher mechanical agitation levels and that the binding of cellulase with CBD of family I (EGV) is more reversible than that of CBD of the cellulase of family II (CenA).

Expression and characterization of the chitin-binding domain of chitinase A1 from Bacillus circulans WL-12

Chitinase A1 from Bacillus circulans WL-12 comprises an N-terminal catalytic domain, two fibronectin type III-like domains, and a C-terminal chitin-binding domain (ChBD). In order to study the biochemical properties and structure of the ChBD, ChBD(ChiA1) was produced in Escherichia coli using a pET expression system and purified by chitin affinity column chromatography. Purified ChBD(ChiA1) specifically bound to various forms of insoluble chitin but not to other polysaccharides, including chitosan, cellulose, and starch. Interaction of soluble chitinous substrates with ChBD(ChiA1) was not detected by means of nuclear magnetic resonance and isothermal titration calorimetry. In addition, the presence of soluble substrates did not interfere with the binding of ChBD(ChiA1) to regenerated chitin. These observations suggest that ChBD(ChiA1) recognizes a structure which is present in insoluble or crystalline chitin but not in chito-oligosaccharides or in soluble derivatives of chitin. ChBD(ChiA1) exhibited binding activity over a wide range of pHs, and the binding activity was enhanced at pHs near its pI and by the presence of NaCl, suggesting that the binding of ChBD(ChiA1) is mediated mainly by hydrophobic interactions. Hydrolysis of beta-chitin microcrystals by intact chitinase A1 and by a deletion derivative lacking the ChBD suggested that the ChBD is not absolutely required for hydrolysis of beta-chitin microcrystals but greatly enhances the efficiency of degradation.

The X6 "thermostabilizing" domains of xylanases are carbohydrate-binding modules: structure and biochemistry of the Clostridium thermocellum X6b domain

Many polysaccharide-degrading enzymes display a modular structure in which a catalytic module is attached to one or more noncatalytic modules. Several xylanases contain a module of previously unknown function (termed "X6" modules) that had been implicated in thermostability. We have investigated the properties of two such "thermostabilizing" modules, X6a and X6b from the Clostridium thermocellumxylanase Xyn10B. These modules, expressed either as discrete entities or as their natural fusions with the catalytic module, were assayed, and their capacity to bind various carbohydrates and potentiate hydrolytic activity was determined. The data showed that X6b, but not X6a, increased the activity of the enzyme against insoluble xylan and bound specifically to xylooligosaccharides and various xylans. In contrast, X6a exhibited no affinity for soluble or insoluble forms of xylan. Isothermal titration calorimetry revealed that the ligand-binding site of X6b accommodates approximately four xylose residues. The protein exhibited K(d) values in the low micromolar range for xylotetraose, xylopentaose, and xylohexaose; 24 microM for xylotriose; and 50 microM for xylobiose. Negative DeltaH and DeltaS values indicate that the interaction of X6b with xylooligosaccharides and xylan is driven by enthalpic forces. The three-dimensional structure of X6b has been solved by X-ray crystallography to a resolution of 2.1 A. The protein is a beta-sandwich that presents a tryptophan and two tyrosine residues on the walls of a shallow cleft that is likely to be the xylan-binding site. In view of the structural and carbohydrate-binding properties of X6b, it is proposed that this and related modules be re-assigned as family 22 carbohydrate-binding modules.

Adsorption of thermomonospora fusca E(5) cellulase on silanized silica

The adsorption kinetics and dodeceyltrimethylammonium-bromide-mediated elution of Thermomonospora fusca E(5) cellulase were recorded in situ, at hydrophobic, silanized silica. Experiments were performed at different solution concentrations, ranging from 0.001 to 0.70 mg/mL. Plateau values of adsorbed mass generally increased with increasing solution concentration, with the adsorbed layer being only partially eluted by buffer. Treatment with surfactant removed more of the adsorbed enzyme in each case, with the remaining adsorbed mass varying little among experiments. Adsorption of E(5) into this nonremovable state was suggested to occur early in the adsorption process and continue until some critical surface concentration was reached. Beyond this critical value of adsorbed mass, adsorption progressed with the protein adopting more loosely bound states. Adsorption kinetic data were interpreted with reference to an adsorption mechanism allowing for irreversible adsorption into two dissimilar states. These states were distinguished by differences in occupied interfacial area, and binding strength, presumably a result of differences in structure. Comparison of the data to the kinetic model based on this mechanism showed that the fraction of adsorbed molecules present in the more tightly bound state decreased as adsorption occurred from solutions of increasing concentration. However, the absolute values of more tightly bound molecules were less dependent on adsorption conditions.

Dynamic interaction of Trichoderma reesei cellobiohydrolases Cel6A and Cel7A and cellulose at equilibrium and during hydrolysis

The binding of cellobiohydrolases to cellulose is a crucial initial step in cellulose hydrolysis. In the search for a detailed understanding of the function of cellobiohydrolases, much information concerning how the enzymes and their constituent catalytic and cellulose-binding domains interact with cellulose and with each other and how binding changes during hydrolysis is still needed. In this study we used tritium labeling by reductive methylation to monitor binding of the two Trichoderma reesei cellobiohydrolases, Cel6A and Cel7A (formerly CBHII and CBHI), and their catalytic domains. Measuring hydrolysis by high-performance liquid chromatography and measuring binding by scintillation counting allowed us to correlate activity and binding as a function of the extent of degradation. These experiments showed that the density of bound protein increased with both Cel6A and Cel7A as hydrolysis proceeded, in such a way that the adsorption points moved off the initial binding isotherms. We also compared the affinities of the cellulose-binding domains and the catalytic domains to the affinities of the intact proteins and found that in each case the affinity of the enzyme was determined by the linkage between the catalytic and cellulose-binding domains. Desorption of Cel6A by dilution of the sample showed hysteresis (60 to 70% reversible); in contrast, desorption of Cel7A did not show hysteresis and was more than 90% reversible. These findings showed that the two enzymes differ with respect to the reversibility of binding.

Acid hydrolysis of bacterial cellulose reveals different modes of synergistic action between cellobiohydrolase I and endoglucanase I

Intact and partially acid hydrolyzed cellulose from Acetobacter xylinum were used as model substrates for cellulose hydrolysis by 1,4-beta-D-glucan-cellobiohydrolase I (CBH I) and 1,4-beta-D-endoglucanase I (EG I) from Trichoderma reesei. A high synergy between CBH I and EG I in simultaneous action was observed with intact bacterial cellulose (BC), but this synergistic effect was rapidly reduced by acid pretreatment of the cellulose. Moreover, a distinct synergistic effect was observed upon sequential endo-exo action on BC, but not on bacterial microcrystalline cellulose (BMCC). A mechanism for endo-exo synergism on crystalline cellulose is proposed where the simultaneous action of the enzymes counteract the decrease of activity caused by undesirable changes in the cellulose surface microstructure.

Reaction kinetics, molecular action, and mechanisms of cellulolytic proteins

Cellulolytic proteins form a complex of enzymes that work together to depolymerize cellulose to the soluble products cellobiose and glucose. Fundamental studies on their molecular mechanisms have been facilitated by advances in molecular biology. These studies have shown homology between cellulases from different microorganisms, and common mechanisms between enzymes whose modes of action have sometimes been viewed as being different, as suggested by the distribution of soluble products. A more complete picture of the cellulolytic action of these proteins has emerged and combines the physical and chemical characteristics of solid cellulose substrates with the specialized structure and function of the cellulases that break it down. This chapter combines the fundamentals of cellulose structure with enzyme function in a manner that relates the cellulose binding and biochemical kinetics at the catalytic site of the proteins to the macroscopic behavior of cellulase enzyme systems.

Widely different off rates of two closely related cellulose-binding domains from Trichoderma reesei

The filamentous fungus Trichoderma reesei produces two cellobiohydrolases (CBHI and CBHII). These, like most other cellulose-degrading enzymes, have a modular structure consisting of a catalytic domain linked to a cellulose-binding domain (CBD). The isolated catalytic domains bind poorly to cellulose and have a much lower activity towards cellulose than the intact enzymes. For the CBDs, no function other than binding to cellulose has been found. We have previously described the reversibility and exchange rate for the binding of the CBD of CBHI to cellulose. In this work, we studied the binding of the CBD of CBHII and showed that it differs markedly from the behaviour of that of CBHI. The apparent binding affinities were similar, but the CBD of CBHII could not be dissociated from cellulose by buffer dilution and did not show a measurable exchange rate. However, desorption could be triggered by shifting the temperature. The CBD of CBHII bound reversibly to chitin. Two variants of the CBHII CBD were made, in which point mutations increased its similarity to the CBD of CBHI. Both variants were found to bind reversibly to cellulose.

Design of a pH-dependent cellulose-binding domain

Protein-carbohydrate interactions typically rely on aromatic stacking interactions of tyrosine, phenylalanine and tryptophan side chains with the sugar rings whereas histidine residues are rarely involved. The small cellulose-binding domain of the Cel7A cellobiohydrolase (formerly CBHI) from Trichoderma reesei binds to crystalline cellulose primarily using a planar strip of three tyrosine side chains. Binding of the wild-type Cel7A CBD is practically insensitive to pH. Here we have investigated how histidine residues mediate the binding interaction and whether the protonation of a histidine side chain makes the binding sensitive to pH. Protein engineering of the Cel7A CBD was thus used to replace the tyrosine residues in two different positions with histidine residues. All of the mutants exhibited a clear pH-dependency of the binding, in clear contrast to the wild-type. Although the binding of the mutants at optimal pH was less than for the wild-type, in one case, Y31H, this binding almost reached the wild-type level.

Enzyme-catalyzed saccharification of model celluloses in the presence of lignacious residues

Experiments were designed to determine the relevance of enzyme partitioning, between the cellulose and non-cellulose components of pretreated biomass, with respect to rates of cellulose saccharification in a typical biomass-to-ethanol process. The experimental system included three cellulose preparations (differing in physicochemical properties): a representative lignin-rich noncellulosic residue (prepared from dilute acid-pretreated switchgrass), an acid-extracted lignin preparation, and a complete Trichoderma reesei cellulase preparation. Enzyme-reactor conditions were typical of those commonly used in biomass-to-ethanol studies. The results were found to be dependent on both the lignin and cellulose preparations used. The noncellulosic lignacious residue, when supplemented at up to 40% (w/w) in cellulose-cellulase reaction mixtures, had little effect on rates and extents of cellulose saccharification. Overall, the results suggest that enzyme partitioning between cellulose and the noncellulosic component of a pretreated feedstock is not likely to have a major impact on cellulose saccharification in typical biomass-to-ethanol processes.

Endoglucanase 28 (Cel12A), a new Phanerochaete chrysosporium cellulase

A 28-kDa endoglucanase was isolated from the culture filtrate of Phanerochaete chrysosporium strain K3 and named EG 28. It degrades carboxymethylated cellulose and amorphous cellulose, and to a lesser degree xylan and mannan but not microcrystalline cellulose (Avicel). EG 28 is unusual among cellulases from aerobic fungi, in that it appears to lack a cellulose-binding domain and does not bind to crystalline cellulose. The enzyme is efficient at releasing short fibres from filter paper and mechanical pulp, and acts synergistically with cellobiohydrolases. Its mode of degrading filter paper appears to be different to that of endoglucanase I from Trichoderma reesei. Furthermore, EG 28 releases colour from stained cellulose beads faster than any other enzyme tested. Peptide mapping suggests that it is not a fragment of another known endoglucanases from P. chrysosporium and peptide sequences indicate that it belongs to family 12 of the glycosyl hydrolases. EG 28 is glycosylated. The biological function of the enzyme is discussed, and it is hypothesized that it is homologous to EG III in Trichoderma reesei and the role of the enzyme is to make the cellulose in wood more accessible to other cellulases.

Functional analysis of a hybrid endoglucanase of bacterial origin having a cellulose binding domain from a fungal exoglucanase

A cellulose binding domain (CBD) of an endo-beta-1,4-glucanase (Ben) from the bacterium Bacillus subtilis BSE616 was replaced with the CBD of exoglucanase I (TexI) from the fungus Trichoderma viride HK-75. The resultant hybrid enzyme Ben'-CBDTexI, comprising the catalytic domain (Ben') of Ben and the CBD (CBDTexI) of TexI, was highly expressed at 20% of the total protein in Escherichia coli. The molecular mass of the hybrid enzyme was estimated to be ca. 38 kDa by SDS-PAGE, which was in good agreement with that calculated from 305 amino acids of Ben and 42 amino acids of CBDTexI. The hybrid enzyme exhibited almost the same activity as that of the original Ben toward soluble substrates, such as cellooligosaccharides. The hybrid enzyme showed higher binding ability and hydrolysis activity toward microcrystalline cellulose (Avicel), even though the length of the CBD of TexI was four times smaller than that of Ben. The hybrid enzyme was more resistant to tryptic digestion than the original Ben. The efficient binding ability of the hybrid enzyme to Avicel permitted purification of the enzyme using an Avicel-affinity column to the extent of ca. 90% purity.

The modular cellulase CelZ of the thermophilic bacterium Clostridium stercorarium contains a thermostabilizing domain

The non-catalytic region of the Clostridium stercorarium cellulase CelZ (Avicelase I) comprises two protein segments (C and C') grouped into different subfamilies of cellulose-binding domain (CBD) family III. The C-terminally located family IIIb domain C was identified as a true cellulose-binding domain responsible for anchoring the CelZ enzyme to cellulose. The family IIIc domain C' immediately adjacent to the catalytic domain was unable to mediate binding to cellulose. A deletion study revealed a lack of independence of this pair of domains: almost the entire C' domain was required to maintain the catalytic activity and the thermostability of the enzyme.

Analysis of molecular size distributions of cellulose molecules during hydrolysis of cellulose by recombinant Cellulomonas fimi beta-1,4-glucanases

Four beta-1,4-glucanases (cellulases) of the cellulolytic bacterium Cellulomonas fimi were purified from Escherichia coli cells transformed with recombinant plasmids. Previous analyses using soluble substrates had suggested that CenA and CenC were endoglucanases while CbhA and CbhB resembled the exo-acting cellobiohydrolases produced by cellulolytic fungi. Analysis of molecular size distributions during cellulose hydrolysis by the individual enzymes confirmed these preliminary findings and provided further evidence that endoglucanase CenC has a more processive hydrolytic activity than CenA. The significant differences between the size distributions obtained during hydrolysis of bacterial microcrystalline cellulose and acid-swollen cellulose can be explained in terms of the accessibility of beta-1,4-glucan chains to enzyme attack. Endoglucanases and cellobiohydrolases were much more easily distinguished when the acid-swollen substrate was used.

Tryptophan 272: an essential determinant of crystalline cellulose degradation by Trichoderma reesei cellobiohydrolase Cel6A

Trichoderma reesei cellobiohydrolase Cel6A (formerly CBHII) has a tunnel shaped active site with four internal subsites for the glucose units. We have predicted an additional ring stacking interaction for a sixth glucose moiety with a tryptophan residue (W272) found on the domain surface. Mutagenesis of this residue selectively impairs the enzyme function on crystalline cellulose but not on soluble or amorphous substrates. Our data shows that W272 forms an additional subsite at the entrance of the active site tunnel and suggests it has a specialised role in crystalline cellulose degradation, possibly in guiding a glucan chain into the tunnel.

The Streptomyces reticuli alpha-chitin-binding protein CHB2 and its gene

When co-cultivated with chitin-containing fungi, Streptomyces reticuli secretes the chitin-binding protein CHB2. Microscopical and immunological investigations revealed that CHB2 acts like a glue to mediate the contact between the fungal and the Streptomyces hyphae. CHB2 was purified to homogeneity, and the sequence of its N-terminal amino acids was determined and used to deduce an oligonucleotide, which was then used to probe a subgenomic library. The chb2 gene was cloned, sequenced and overexpressed. The deduced mature protein has a molecular mass of 18.6 kDa, and a large number of its amino acids are identical to those of CHB1 from Streptomyces olivaceoviridis. CHB2 effectively targets different types of alpha-chitin, but no other polysaccharide. The dissociation constant (Kd) for binding to purified crab shell chitin is 0.27 microM. Immunological studies suggest that homologues of CHB1 and CHB2 are secreted by streptomycetes while growing in the presence of alpha-chitin-containing substrates.

Stability and oligosaccharide binding of the N1 cellulose-binding domain of Cellulomonas fimi endoglucanase CenC

Differential scanning calorimetry has been used to study the thermal stability and oligosaccharide-binding thermodynamics of the N-terminal cellulose-binding domain of Cellulomonas fimi beta-1,4-glucanase CenC (CBDN1). CBDN1 has a relatively low maximum stability (delta Gmax = 33 kJ/mol = 216 J/residue at 1 degree C and pH 6.1) compared to other small single-domain globular proteins. The unfolding is fully reversible between pH 5.5 and 9 and in accordance with the two-state equilibrium model between pH 5.5 and 11. When the single disulfide bond in CBDN1 is reduced, the protein remains unfolded at all conditions, as judged by NMR spectroscopy. This indicates that the intramolecular cross-link makes a major contribution to the stability of CBDN1. The measured heat capacity change of unfolding (delta Cp = 7.5 kJ mol-1 K-1) agrees well with that calculated from the predicted changes in the solvent accessible nonpolar and polar surface areas upon unfolding. Extrapolation of the specific enthalpy and entropy of unfolding to their respective convergence temperature indicates that per residue unfolding energies for CBDN1, an isolated domain, are in accordance with those found by Privalov (1) for many single-domain globular proteins. DSC thermograms of the unfolding of CBDN1 in the presence of various concentrations of cellopentaose were fit to a thermodynamic model describing the linkage between protein-ligand binding and protein unfolding. A global two-dimensional minimization routine is used to regress the binding enthalpy, binding constant, and unfolding thermodynamics for the CBDN1-cellopentaose system. Extrapolated binding constants are in quantitative agreement with those determined by isothermal titration calorimetry at 35 degrees C.

Surface diffusion of cellulases and their isolated binding domains on cellulose

The surface diffusion rate of bacterial cellulases from Cellulomonas fimi on cellulose was quantified using fluorescence recovery after photobleaching analysis. Studies were performed on an exo-beta-1-4-glycanase (Cex), an endo-beta-1-4-glucanase (CenA), and their respective isolated cellulose-binding domains (CBDs). Although these cellulose-binding domains bind irreversibly to microcrystalline cellulose, greater than 70% of bound molecules are mobile on the cellulose surface. Surface diffusion rates are dependent on surface coverage and range from a low of 2 x 10(-11) to a maximum of 1.2 x 10(-10) cm2/s. The fraction of mobile molecules increases only slightly with increasing fractional surface coverage density. Results demonstrate that the packing of C. fimi cellulases and their isolated binding domains onto the cellulose surface is a dynamic process. This suggests that the exclusion of potential CBD binding sites on the cellulose due to steric effects of neighboring bound CBDs may not fully explain the apparent negative cooperativity exhibited in CBD adsorption isotherms. Comparison with the kinetics of cellulase hydrolysis of crystalline substrate suggests that surface diffusion rates do not limit cellulase activity.

Trichoderma reesei cellobiohydrolase I with an endoglucanase cellulose-binding domain: action on bacterial microcrystalline cellulose

Cellulolytic enzymes consist of distinct catalytic and cellulose-binding domains (CBDs). The presence of a CBD improves the binding and activity of cellulases on insoluble substrates but has no influence on their activities on soluble substrates. Structural and biochemical studies of a fungal CBD from Trichoderma reesei cellobiohydrolase I have revealed a wedge shaped structure with a flat cellulose binding surface containing three essential tyrosine residues. The face of the wedge is strictly conserved in all fungal CBDs while many differences occur on the other face of the wedge. Here we have studied the importance of these differences on the function of the T. reesei CBHI by replacing its CBD by a homologous CBD from the endoglucanase, EGI. Our data shows that, apart from slightly improved affinity of the hybrid enzyme, the domain exchange does not significantly influence the function of CBHI.

Specific interaction of the Streptomyces chitin-binding protein CHB1 with alpha-chitin--the role of individual tryptophan residues

Streptomyces olivaceoviridis secretes a so far unique protein of 18.7 kDa (CHB1) which lacks catalytic activity. It interacts highly specifically with alpha-chitin, but not with beta-chitin, chitosan, or cellulose. Each of the five codons for tryptophan (Trp) in the chb1 gene was replaced by those for leucine (Leu) or tyrosine (Tyr). Eight corresponding mutant proteins and the wild-type protein were purified to homogeneity and their binding capacity to alpha-chitin was determined. The relative affinities to anti-CHB1 antibodies, the kinetics of binding, the dissociation constants, circular dichroism, and fluorescence emission spectra for three mutant types were compared to the characteristics of CHB1. The presented data lead to the following conclusions. (a) CHBI presents a highly flexible protein lacking alpha-helices. (b) Replacement of each of the buried Trp residues (Trp134 and Trp184) leads to conformational alterations and, in due course, to a considerably reduced binding affinity of the protein. (c) The exchange of the exposed Trp 57 by either Leu or Tyr results in relatively slight topological changes, but entails a loss of binding capacity of about 90%. (d) The dissociation constant was highest for the mutant protein [L57]CHB1 (2.17 microM), followed by [L134]CHB1 (0.91 microM) and [L184]CHB1 (0.26 microM), and lowest for the progenitor CHB1 (0.11 microM), indicating its strong affinity to the unsoluble substrate. (e) The data suggest that the exposed Trp57 contributes directly and significantly to the interaction of CHB1 with alpha-chitin.

Role of scaffolding protein CipC of Clostridium cellulolyticum in cellulose degradation

The role of a miniscaffolding protein, miniCipC1, forming part of Clostridium cellulolyticum scaffolding protein CipC in insoluble cellulose degradation was investigated. The parameters of the binding of miniCipC1, which contains a family III cellulose-binding domain (CBD), a hydrophilic domain, and a cohesin domain, to four insoluble celluloses were determined. At saturating concentrations, about 8.2 micromol of protein was bound per g of bacterial microcrystalline cellulose, while Avicel, colloidal Avicel, and phosphoric acid-swollen cellulose bound 0.28, 0.38, and 0.55 micromol of miniCipC1 per g, respectively. The dissociation constants measured varied between 1.3 x 10(-7) and 1.5 x 10(-8) M. These results are discussed with regard to the properties of the various substrates. The synergistic action of miniCipC1 and two forms of endoglucanase CelA (with and without the dockerin domain [CelA2 and CelA3, respectively]) in cellulose degradation was also studied. Although only CelA2 interacted with miniCipC1 (K(d), 7 x 10(-9) M), nonhydrolytic miniCipC1 enhanced the activities of endoglucanases CelA2 and CelA3 with all of the insoluble substrates tested. This finding shows that miniCipC1 plays two roles: it increases the enzyme concentration on the cellulose surface and enhances the accessibility of the enzyme to the substrate by modifying the structure of the cellulose, leading to an increased available cellulose surface area. In addition, the data obtained with a hybrid protein, CelA3-CBD(CipC), which was more active towards all of the insoluble substrates tested confirm that the CBD of the scaffolding protein plays an essential role in cellulose degradation.

Isotherms for adsorption of cellobiohydrolase I and II from Trichoderma reesei on microcrystalline cellulose

Adsorption to microcrystalline cellulose (Avicel) of pure cellobiohydrolase I and II (CBH I and CBH II) from Trichoderma reesei has been studied. Adsorption isotherms of the enzymes were measured at 4 degrees C using CBH I and CBH II alone and in reconstituted equimolar mixtures. Several models (Langmuir, Freundlich, Temkin, Jovanovic) were tested to describe the experimental adsorption isotherms. The isotherms did not follow the basic (one site) Langmuir equation that has often been used to describe adsorption isotherms of cellulases; correlation coefficients (R2) were only 0.926 and 0.947, for CBH I and II, respectively. The experimental isotherms were best described by a model of Langmuir type with two adsorption sites and by a combined Langmuir-Freundlich model (analogous to the Hill equation); using these models the correlation coefficients were in most cases higher than 0.995. Apparent binding parameters derived from the two sites Langmuir model indicated stronger binding of CBH II compared to CBH I; the distribution coefficients were 20.7 and 3.7 L/g for the two enzymes, respectively. The binding capacity, on the other hand, was higher for CBH I, 1.0 mumol (67 mg) per gram Avicel, compared to 0.57 mumol/g (30 mg/g) for CBH II. The isotherms when analyzed with the combined Langmuir-Freundlich model indicated presence of unequal binding sites on cellulose and/or negative cooperatively in the binding of the enzyme molecules.

Thermostability and irreversible activity loss of exoglucanase/xylanase Cex from Cellulomonas fimi

The activity of the beta-1,4-glycanase Cex (EC 3.2.1.91) from Cellulomonas fimi is investigated in connection with its industrial application in cellulose hydrolysis and its potential use in cellosaccharide synthesis. Catalytic activity measurements as a function of temperature, complemented with differential scanning calorimetry (DSC) data, are used to characterize the thermostability of the protein and the influence of interdomain interactions. The data suggest that the enzyme is irreversibly deactivated in one of two possible ways: (1) through a low-temperature route characterized by first-order kinetics; or (2) through a high-temperature route characterized by an initial reversible step followed by an irreversible step. Melting temperatures (Tm) of Cex and p-33 (the isolated catalytic domain of Cex) as estimated by DSC are 64.2 and 64.0 degrees C, respectively, suggesting that the binding and catalytic domains of the protein fold independently. Kinetic parameters (Km, kcat, and kcat/Km) of Cex for the hydrolysis of p-nitrophenyl beta-D-cellobioside (pNPC) were determined at temperatures ranging from 15 to 80 degrees C. As demanded by reversible mass-action thermodynamics, the Tm of Cex in the presence of excess ligand as determined from activity-temperature data is ca. 66.55 degrees C, more than 2 degrees C higher than the Tm for Cex under ligand-free conditions. The effect of temperature on the rate constant has been determined using Arrhenius plots. Combined with irreversible deactivation half-life data and DSC data, the results are used to evaluate a model, based on a theory developed by Hei et al. (1993), for predicting the time-dependent activity and active-state stability of the protein under a range of potential operating conditions.

Interaction of polysaccharides with the N-terminal cellulose-binding domain of Cellulomonas fimi CenC. 1. Binding specificity and calorimetric analysis

The carbohydrate-binding specificity of the N-terminal cellulose-binding domain (CBDN1) from Cellulomonas fimi beta-1,4-glucanase C (CenC) was investigated using affinity electrophoresis, binding assays and microcalorimetry in parallel with NMR and difference ultraviolet absorbance spectroscopy [Johnson, P.E., Tomme, P., Joshi, M.D., & McIntosh, I., P. (1996) Biochemistry 35, 13895-13906]. Binding of CBDN1 on insoluble cellulose is distinctly different from other cellulose-binding domains. CBDN1 binds amorphous cellulose (phosphoric acid-swollen) with high affinity (Kr = 5.1 L g-1), binds Avicel weakly and does not bind highly crystalline bacterial or tunicin cellulose. Moreover, CBDN1 binds soluble cellooligosaccharides and beta-1,4-linked oligomers of glucose such as hydroxyethycellulose, soluble beta-1,3-1,4-glucans from barley and oat, but has no affinity for alpha-1,4-, beta-1,3-, or beta-1,6-polymers of glucose. This is the first report of a cellulose-binding domain with strong and specific affinity for soluble glycans. The thermodynamics for binding of CBDN1 to oligosaccharides, soluble glycans, and phosphoric acid-swollen cellulose were investigated by titration microcalorimetry. At least four beta-1,4-linked glucopyranosides are required to detect binding. For larger glucans, with five or more glucopyranoside units, the binding constants and standard free energy changes are virtually independent of the glucan chain length, indicating that cellopentaose completely fills the binding site. Binding is moderately strong with binding constants ranging from 3,200 +/- 500 M-1 for cellotetraose, to 25,000 +/- 3,000 M-1 for the larger sugars. The reactions are controlled by favorable standard free enthalpy changes which are compensated in a linear fashion by a significant decrease in entropy. A predominance of polar interactions such as hydrogen bonding together with van der Waals interactions provide the major driving forces for the binding event.

Probing the role of tryptophan residues in a cellulose-binding domain by chemical modification

The cellulose-binding domain (CBDCex) of the mixed function glucanase-xylanase Cex from Cellulomonas fimi contains five tryptophans, two of which are located within the beta-barrel structure and three exposed on the surface (Xu GY et al., 1995, Biochemistry 34:6993-7009). Although all five tryptophans can be oxidized by N-bromosuccinimide (NBS), stopped-flow measurements show that three tryptophans react faster than the other two. NMR analysis during the titration of CBDCex with NBS shows that the tryptophans on the surface of the protein are fully oxidized before there is significant reaction with the two buried tryptophans. Additionally, modification of the exposed tryptophans does not affect the conformation of the backbone of CBDCex, whereas complete oxidation of all five tryptophans denatures the polypeptide. The modification of the equivalent of one and two tryptophans by NBS reduces binding of CBDCex to cellulose by 70% and 90%, respectively. This confirms the direct role of the exposed aromatic residues in the binding of CBDCex to cellulose. Although adsorption to cellulose does afford some protection against NBS, as evidenced by the increased quantity of NBS required to oxidize all of the tryptophan residues, the polypeptide can still be oxidized completely when adsorbed. This suggests that, whereas the binding appears to be irreversible overall [Ong E et al., 1989, Bio/Technology 7:604-607], each of the exposed tryptophans interacts reversibly with cellulose.

Microbial hydrolysis of polysaccharides

Microorganisms are efficient degraders of starch, chitin, and the polysaccharides in plant cell walls. Attempts to purify hydrolases led to the realization that a microorganism may produce a multiplicity of enzymes, referred to as a system, for the efficient utilization of a polysaccharide. In order to fully characterize a particular enzyme, it must be obtained free of the other components of a system. Quite often, this proves to be very difficult because of the complexity of a system. This realization led to the cloning of the genes encoding them as an approach to eliminating other components. More than 400 such genes have been cloned and sequenced, and the enzymes they encode have been grouped into more than 50 families of related amino acid sequences. The enzyme systems revealed in this manner are complex on two quite different levels. First, many of the individual enzymes are complex, as they are modular proteins comprising one or more catalytic domains linked to ancillary domains that often include one or more substrate-binding domains. Second, the systems are complex, comprising from a few to 20 or more enzymes, all of which hydrolyze a particular substrate. Systems for the hydrolysis of plant cell walls usually contain more components than systems for the hydrolysis of starch and chitin because the cell walls contain several polysaccharides. In general, the systems produced by different microorganisms for the hydrolysis of a particular polysaccharide comprise similar enzymes from the same families.