High energy radiation grafting of fluoropolymers

Immobilization of streptavidin-horseradish peroxidase onto a biotinylated poly(acrylic acid) backbone that had been radiation-grafted to a PTFE film

Films of polytetrafluoroethylene (PTFE) were modified by radiation graft polymerization of acrylic acid (AAc). Optimal conditions for efficient AAc grafting were studied, including pre-irradiation dose in air, monomer concentration, temperature and time of the grafting process. Carboxylic groups of the grafted polyAAc were activated with carbodiimide (EDC) for biotinylation by reaction with 5-(biotinamido) pentylamine. Streptavidin-horseradish peroxidase (SA-HRP) was immobilized by affinity complexation of the SA with the biotin groups on the PTFE surface. The amount of active HRP immobilized on the PTFE films was determined as a function of the extent of polyAAc grafting. This study has demonstrated the utility of combining the processes of (a) radiation grafting of polymers with reactive groups onto inert polymers such as PTFE, (b) biotinylation of the graft polymer reactive groups, (c) immobilization of streptavidin on the biotinylated surface sites, followed by (d) immobilization of biotinylated, biologically active molecules via complexation of their conjugates with streptavidin. In this study, the last two steps were combined by immobilizing the complex of streptavidin and biotinylated HRP onto the biotinylated surface sites. The unique nature of this process is the ability to immobilize biotinylated molecules on an inert surface as PTFE.

Preparation of polymer decorated graphene oxide by γ-ray induced graft polymerization

Herein, we report a facile approach to decorate graphene oxide (GO) sheets with poly(vinyl acetate) (PVAc) by γ-ray irradiation-induced graft polymerization. The content of PVAc in the obtained sample, i.e., PVAc grafted GO (GO-g-PVAc) is calculated by the loss weight in thermogravimetric analysis (TGA) curves. A GO-g-PVAc sample with a degree of grafting (DG) of 28.5% was well dispersed in common organic solvents and the dispersions obtained were extremely stable at room temperature without any aggregation, even after standing for 2 months. The excellent dispersibility and stability of GO-g-PVAc in common organic solvents are readily rationalized in terms of the full coverage of PVAc chains and solvated layer formation on graphene oxide sheets surface, which weakens the interlaminar attraction of GO sheets. This approach presents a facile route for the preparation of dispersible GO and shows great potential in the preparation of graphene-based composites by solution-processes.

A biologically active surface enzyme assembly that attenuates thrombus formation

Activation of hemostatic pathways by blood-contacting materials remains a major hurdle in the development of clinically durable artificial organs and implantable devices. We postulate that surface-induced thrombosis may be attenuated by the reconstitution onto blood contacting surfaces of bioactive enzymes that regulate the production of thrombin, a central mediator of both clotting and platelet activation cascades. Thrombomodulin (TM), a transmembrane protein expressed by endothelial cells, is an established negative regulator of thrombin generation in the circulatory system. Traditional techniques to covalently immobilize enzymes on solid supports may modify residues contained within or near the catalytic site, thus reducing the bioactivity of surface enzyme assemblies. In this report, we present a molecular engineering and bioorthogonal chemistry approach to site-specifically immobilize a biologically active recombinant human TM fragment onto the luminal surface of small diameter prosthetic vascular grafts. Bioactivity and biostability of TM modified grafts is confirmed in vitro and the capacity of modified grafts to reduce platelet activation is demonstrated using a non-human primate model. These studies indicate that molecularly engineered interfaces that display TM actively limit surface-induced thrombus formation.

Surface functionalization of polypropylene devices with hemocompatible DMAAm and NIPAAm grafts for norfloxacin sustained release

To improve the hemocompatibility and elution of antimicrobial agents for medical devices, N,N′-dimethylacrylamide (DMAAm) and N-isopropylacrylamide (NIPAAm) were sequentially grafted onto polypropylene (PP) films. Various (PP-g-DMAAm)-g-NIPAAm grafts were prepared using different time periods of irradiation while keeping the radiation dose constant. The hydrogel layer that formed on the surface of the PP was temperature-responsive (shifted from 32°C for NIPAAm to 37°C for the copolymer). The (PP-g-DMAAm)-g-NIPAAm films adsorbed serum albumin but not fibrinogen and had significantly lower hemolytic and thrombogenic activity. The DMAAm promoted the loading of norfloxacin (13.3 μg cm—2) when the hydrogel layer was swollen; as the NIPAAm shrank, a sustained delivery (∼6 h) occurred at body temperature. These functionalized PP films have potential as hemo- and cyto-compatible materials for medical devices and drug delivery products.

Hemocompatibility of poly(vinylidene fluoride) membrane grafted with network-like and brush-like antifouling layer controlled via plasma-induced surface PEGylation

In this work, the hemocompatibility of PEGylated poly(vinylidene fluoride) (PVDF) microporous membranes with varying grafting coverage and structures via plasma-induced surface PEGylation was studied. Network-like and brush-like PEGylated layers on PVDF membrane surfaces were achieved by low-pressure and atmospheric plasma treatment. The chemical composition, physical morphology, grafting structure, surface hydrophilicity, and hydration capability of prepared membranes were determined to illustrate the correlations between grafting qualities and hemocompatibility of PEGylated PVDF membranes in contact with human blood. Plasma protein adsorption onto different PEGylated PVDF membranes from single-protein solutions and the complex medium of 100% human plasma were measured by enzyme-linked immunosorbent assay (ELISA) with monoclonal antibodies. Hemocompatibility of the PEGylated membranes was evaluated by the antifouling property of platelet adhesion observed by scanning electron microscopy (SEM) and the anticoagulant activity of the blood coagulant determined by testing plasma-clotting time. The control of grafting structures of PEGylated layers highly regulates the PVDF membrane to resist the adsorption of plasma proteins, the adhesion of platelets, and the coagulation of human plasma. It was found that PVDF membranes grafted with brush-like PEGylated layers presented higher hydration capability with binding water molecules than with network-like PEGylated layers to improve the hemocompatible character of plasma protein and blood platelet resistance in human blood. This work suggests that the hemocompatible nature of grafted PEGylated polymers by controlling grafting structures gives them great potential in the molecular design of antithrombogenic membranes for use in human blood.

Preirradiation Graft Polymerization of Styrene in a Poly(tetrafluoroethylene) Film Investigated by Time-Resolved Small-Angle Neutron Scattering

Preirradiation graft polymerization of styrene in a poly(tetrafluoroethylene) (PTFE) film was examined by time-resolved small-angle neutron scattering (SANS). A crosslinked PTFE film, thickness of which is about 50 μm, was irradiated byγ-ray and immersed in a mixed solvent of styrene monomer and toluene. SANS elucidated that graft polymerization proceeds by two reaction processes (I) and (II). In process (I) at  min, graft polymerization occurs at an interface between crystalline and amorphous PTFE domains and the grafted polystyrene segregates from PTFE, forming a thin layer with a sharp interface. In process (II) at  min, grafted PS layer starts to bridge between crystalline domains. At the end of process (II), 40% of total crystalline PTFE domain is covered by the grafted PS chains.

Comprehensive characterization of grafted expanded poly(tetrafluoroethylene) for medical applications

Successful implantation of any biomaterial depends on its mechanical, architectural, and surface properties. Materials with good bulk properties seldom possess the appropriate surface characteristics required for good biointegration. The present study investigates the results of surface modification of a highly porous, fully fluorinated polymeric substrate, expanded poly(tetrafluoroethylene) (ePTFE), with a view to improving the surface bioactivity and hence ultimately its biointegration. Modification involved gamma irradiation-induced graft copolymerization with the monomers monoacryloxyethyl phosphate (MAEP) and methacryloxyethyl phosphate (MOEP) in various solvent systems (water, methanol, methyl ethyl ketone, and mixtures thereof). In order to determine the penetration depth of the graft copolymer into the pores and/or the bulk of the ePTFE membranes, angle-dependent X-ray photoelectron spectroscopy (XPS) and magnetic resonance imaging (MRI) were used. It was found that the penetration depth was critically affected by the choice of monomer and solvent as well as by the technique used to remove dissolved oxygen from the grafting mixture: nitrogen degassing versus vacuum. Difficulties due to the porous nature of the membranes in establishing the lateral position of the graft copolymers were largely overcome by combining data from microattenuated total reflectance Fourier transfer infrared (μ-ATR-FTIR) mapping and time-of-flight secondary ion mass spectrometry (ToF-SIMS) imaging. Results show that the large variation in graft heterogeneity found between different samples is largely an effect of the underlying substrate and choice of monomer. The results from this study provide the necessary knowledge and experimental data to control both the graft copolymer lateral position and depth of penetration in these porous ePTFE membranes.