Structural and functional insights provided by crystal structures of DNA polymerases and their substrate complexes

Global conformational dynamics of a Y-family DNA polymerase during catalysis

High-resolution analysis of protein, and DNA conformational changes during DNA polymerization, established relationships between the enzymatic function and conformational dynamics of individual domains for a DNA polymerase.

Replicative DNA polymerases are stalled by damaged DNA while the newly discovered Y-family DNA polymerases are recruited to rescue these stalled replication forks, thereby enhancing cell survival. The Y-family DNA polymerases, characterized by low fidelity and processivity, are able to bypass different classes of DNA lesions. A variety of kinetic and structural studies have established a minimal reaction pathway common to all DNA polymerases, although the conformational intermediates are not well defined. Furthermore, the identification of the rate-limiting step of nucleotide incorporation catalyzed by any DNA polymerase has been a matter of long debate. By monitoring time-dependent fluorescence resonance energy transfer (FRET) signal changes at multiple sites in each domain and DNA during catalysis, we present here a real-time picture of the global conformational transitions of a model Y-family enzyme: DNA polymerase IV (Dpo4) from Sulfolobus solfataricus. Our results provide evidence for a hypothetical DNA translocation event followed by a rapid protein conformational change prior to catalysis and a subsequent slow, post-chemistry protein conformational change. Surprisingly, the DNA translocation step was induced by the binding of a correct nucleotide. Moreover, we have determined the directions, rates, and activation energy barriers of the protein conformational transitions, which indicated that the four domains of Dpo4 moved in a synchronized manner. These results showed conclusively that a pre-chemistry conformational change associated with domain movements was too fast to be the rate-limiting step. Rather, the rearrangement of active site residues limited the rate of correct nucleotide incorporation. Collectively, the conformational dynamics of Dpo4 offer insights into how the inter-domain movements are related to enzymatic function and their concerted interactions with other proteins at the replication fork.

Faithful replication of genomic DNA by DNA polymerases is crucial for maintaining the genetic integrity of an organism. If DNA becomes damaged, specialized lesion-bypass DNA polymerases are recruited to correct errors in the DNA. A variety of kinetic and structural studies have established a minimal kinetic mechanism common to all DNA polymerases. This mechanism includes several steps involving discrete protein conformational changes. However, the inter-relationship between conformational dynamics and enzymatic function has remained unclear, and identification of the rate-limiting step during nucleotide incorporation has been controversial. In this study, we monitored the directions and rates of motion of domains of a lesion-bypass polymerase during correct nucleotide incorporation. Our study provides several significant findings. First, the binding of a correct nucleotide induces a fast and surprising DNA translocation event. Second, all four domains of the polymerase rapidly move in a synchronized manner before and after the polymerization reaction. Third, repositioning of active site residues is the rate-limiting step during correct nucleotide incorporation. Thus, the motions of the polymerase and the polymerase-bound DNA substrate are tightly coupled to catalysis.

Techniques used to study the DNA polymerase reaction pathway

A minimal reaction pathway for DNA polymerases was established over 20years ago using chemical-quench methods. Since that time there has been considerable interest in noncovalent steps in the reaction pathway, conformational changes involving the polymerase or its DNA substrate that may play a role in substrate specificity. Fluorescence-based assays have been devised in order to study these conformational transitions and the results obtained have added new detail to the reaction pathway.

Terminal deoxynucleotidyl transferase: the story of a misguided DNA polymerase

Nearly every DNA polymerase characterized to date exclusively catalyzes the incorporation of mononucleotides into a growing primer using a DNA or RNA template as a guide to direct each incorporation event. There is, however, one unique DNA polymerase designated terminal deoxynucleotidyl transferase that performs DNA synthesis using only single-stranded DNA as the nucleic acid substrate. In this chapter, we review the biological role of this enigmatic DNA polymerase and the biochemical mechanism for its ability to perform DNA synthesis in the absence of a templating strand. We compare and contrast the molecular events for template-independent DNA synthesis catalyzed by terminal deoxynucleotidyl transferase with other well-characterized DNA polymerases that perform template-dependent synthesis. This includes a quantitative inspection of how terminal deoxynucleotidyl transferase binds DNA and dNTP substrates, the possible involvement of a conformational change that precedes phosphoryl transfer, and kinetic steps that are associated with the release of products. These enzymatic steps are discussed within the context of the available structures of terminal deoxynucleotidyl transferase in the presence of DNA or nucleotide substrate. In addition, we discuss the ability of proteins involved in replication and recombination to regulate the activity of the terminal deoxynucleotidyl transferase. Finally, the biomedical role of this specialized DNA polymerase is discussed focusing on its involvement in cancer development and its use in biomedical applications such as labeling DNA for detecting apoptosis.

Variations on a theme: eukaryotic Y-family DNA polymerases

Most classical DNA polymerases, which function in normal DNA replication and repair, are unable to synthesize DNA opposite damage in the template strand. Thus in order to replicate through sites of DNA damage, cells are equipped with a variety of nonclassical DNA polymerases. These nonclassical polymerases differ from their classical counterparts in at least two important respects. First, nonclassical polymerases are able to efficiently incorporate nucleotides opposite DNA lesions while classical polymerases are generally not. Second, nonclassical polymerases synthesize DNA with a substantially lower fidelity than do classical polymerases. Many nonclassical polymerases are members of the Y-family of DNA polymerases, and this article focuses on the mechanisms of the four eukaryotic members of this family: polymerase eta, polymerase kappa, polymerase iota, and the Rev1 protein. We discuss the mechanisms of these enzymes at the kinetic and structural levels with a particular emphasis on how they accommodate damaged DNA substrates. Work over the last decade has shown that the mechanisms of these nonclassical polymerases are fascinating variations of the mechanism of the classical polymerases. The mechanisms of polymerases eta and kappa represent rather minor variations, while the mechanisms of polymerase iota and the Rev1 protein represent rather major variations. These minor and major variations all accomplish the same goal: they allow the nonclassical polymerases to circumvent the problems posed by the template DNA lesion.

Differences between Ca2+ and Mg2+ in DNA binding and release by the SfiI restriction endonuclease: implications for DNA looping

Many enzymes acting on DNA require Mg(2+) ions not only for catalysis but also to bind DNA. Binding studies often employ Ca(2+) as a substitute for Mg(2+), to promote DNA binding whilst disallowing catalysis. The SfiI endonuclease requires divalent metal ions to bind DNA but, in contrast to many systems where Ca(2+) mimics Mg(2+), Ca(2+) causes SfiI to bind DNA almost irreversibly. Equilibrium binding by wild-type SfiI cannot be conducted with Mg(2+) present as the DNA is cleaved so, to study the effect of Mg(2+) on DNA binding, two catalytically-inactive mutants were constructed. The mutants bound DNA in the presence of either Ca(2+) or Mg(2+) but, unlike wild-type SfiI with Ca(2+), the binding was reversible. With both mutants, dissociation was slow with Ca(2+) but was in one case much faster with Mg(2+). Hence, Ca(2+) can affect DNA binding differently from Mg(2+). Moreover, SfiI is an archetypal system for DNA looping; on DNA with two recognition sites, it binds to both sites and loops out the intervening DNA. While the dynamics of looping cannot be measured with wild-type SfiI and Ca(2+), it becomes accessible with the mutant and Mg(2+).

Mapping the position of DNA polymerase-bound DNA templates in a nanopore at 5 A resolution

DNA polymerases are molecular motors that catalyze template-dependent DNA replication, advancing along template DNA by one nucleotide with each catalytic cycle. Nanopore-based measurements have emerged as a single molecule technique for the study of these enzymes. Using the alpha-hemolysin nanopore, we determined the position of DNA templates bearing inserts of abasic (1',2'-dideoxy) residues, bound to the Klenow fragment of Escherichia coli DNA polymerase I (KF) or to bacteriophage T7 DNA polymerase. Hundreds of individual polymerase complexes were analyzed at 5 A precision within minutes. We generated a map of current amplitudes for DNA-KF-deoxynucleoside triphosphate (dNTP) ternary complexes, using a series of templates bearing blocks of three abasic residues that were displaced by approximately 5 A in the nanopore lumen. Plotted as a function of the distance of the abasic insert from n = 0 in the active site of the enzyme held atop the pore, this map has a single peak. The map is similar when the primer length, the DNA sequences flanking the abasic insert, and the DNA sequences in the vicinity of the KF active site are varied. Primer extension catalyzed by KF using a three abasic template in the presence of a mixture of dNTPs and 2',3'-dideoxynucleoside triphosphates resulted in a ladder of ternary complexes with discrete amplitudes that closely corresponded to this map. An ionic current map measured in the presence of 0.15 M KCl mirrored the map obtained with 0.3 M KCl, permitting experiments with a broader range of mesophilic DNA and RNA processing enzymes. We used the abasic templates to show that capture of complexes with the KF homologue, T7 DNA polymerase, yields an amplitude map nearly indistinguishable from the KF map.

Specific nucleotide binding and rebinding to individual DNA polymerase complexes captured on a nanopore

Nanoscale pores are a tool for single molecule analysis of DNA or RNA processing enzymes. Monitoring catalytic activity in real time using this technique requires that these enzymes retain function while held atop a nanopore in an applied electric field. Using an alpha-hemolysin nanopore, we measured the dwell time for complexes of DNA with the Klenow fragment of Escherichia coli DNA polymerase I (KF) as a function of the concentration of deoxynucleoside triphosphate (dNTP) substrate. We analyzed these dwell time measurements in the framework of a two-state model for captured complexes (DNA-KF binary and DNA-KF-dNTP ternary states). Average nanopore dwell time increased without saturating as a function of correct dNTP concentration across 4 orders of magnitude. This arises from two factors that are proportional to dNTP concentration: (1) The fraction of complexes that are in the ternary state when initially captured predominantly affects dwell time at low dNTP concentrations. (2) The rate of binding and rebinding of dNTP to captured complexes affects dwell time at higher dNTP concentrations. Thus there are two regimes that display a linear relationship between average dwell time and dNTP concentration. The transition from one linear regime to the other occurs near the equilibrium dissociation constant (K(d)) for dNTP binding to KF-DNA complexes in solution. We conclude from the combination of titration experiments and modeling that DNA-KF complexes captured atop the nanopore retain iterative, sequence-specific dNTP binding, as required for catalysis and fidelity in DNA synthesis.

Replisome structure and conformational dynamics underlie fork progression past obstacles

Replisomes are multiprotein complexes that unzip the parental helix and duplicate the separated strands during genome replication. The antiparallel structure of DNA poses unique geometric constraints to the process, and the replisome has evolved unique dynamic features that solve this problem. Interestingly, the solution to duplex DNA replication has been co-opted to solve many other important problems that replisomes must contend with during the duplication of long chromosomes. For example, along its path the replisome will encounter lesions and DNA-bound proteins. Recent studies show that the replisome can circumvent lesions on either strand, using the strategy normally applied to the lagging strand synthesis. Circumventing lesions can also be assisted by other proteins that transiently become a part of the replisome. The replisome must also contend with DNA-binding proteins and recent studies reveal a fascinating process that enables it to bypass RNA polymerase without stopping.

Local conformations and competitive binding affinities of single- and double-stranded primer-template DNA at the polymerization and editing active sites of DNA polymerases

In addition to their capacity for template-directed 5' --> 3' DNA synthesis at the polymerase (pol) site, DNA polymerases have a separate 3' --> 5' exonuclease (exo) editing activity that is involved in assuring the fidelity of DNA replication. Upon misincorporation of an incorrect nucleotide residue, the 3' terminus of the primer strand at the primer-template (P/T) junction is preferentially transferred to the exo site, where the faulty residue is excised, allowing the shortened primer to rebind to the template strand at the pol site and incorporate the correct dNTP. Here we describe the conformational changes that occur in the primer strand as it shuttles between the pol and exo sites of replication-competent Klenow and Klentaq DNA polymerase complexes in solution and use these conformational changes to measure the equilibrium distribution of the primer between these sites for P/T DNA constructs carrying both matched and mismatched primer termini. To this end, we have measured the fluorescence and circular dichroism spectra at wavelengths of >300 nm for conformational probes comprising pairs of 2-aminopurine bases site-specifically replacing adenine bases at various positions in the primer strand of P/T DNA constructs bound to DNA polymerases. Control experiments that compare primer conformations with available x-ray structures confirm the validity of this approach. These distributions and the conformational changes in the P/T DNA that occur during template-directed DNA synthesis in solution illuminate some of the mechanisms used by DNA polymerases to assure the fidelity of DNA synthesis.

Electronic control of DNA polymerase binding and unbinding to single DNA molecules

DNA polymerases catalyze template-dependent genome replication. The assembly of a high affinity ternary complex between these enzymes, the double strand-single strand junction of their DNA substrate, and the deoxynucleoside triphosphate (dNTP) complementary to the first template base in the polymerase active site is essential to this process. We present a single molecule method for iterative measurements of DNA-polymerase complex assembly with high temporal resolution, using active voltage control of individual DNA substrate molecules tethered noncovalently in an alpha-hemolysin nanopore. DNA binding states of the Klenow fragment of Escherichia coli DNA polymerase I (KF) were diagnosed based upon their ionic current signature, and reacted to with submillisecond precision to execute voltage changes that controlled exposure of the DNA substrate to KF and dNTP. Precise control of exposure times allowed measurements of DNA-KF complex assembly on a time scale that superimposed with the rate of KF binding. Hundreds of measurements were made with a single tethered DNA molecule within seconds, and dozens of molecules can be tethered within a single experiment. This approach allows statistically robust analysis of the assembly of complexes between DNA and RNA processing enzymes and their substrates at the single molecule level.

A possible mechanism for the dynamics of transition between polymerase and exonuclease sites in a high-fidelity DNA polymerase

The fidelity of DNA synthesis by DNA polymerase is significantly increased by a mechanism of proofreading that is performed at the exonuclease active site separate from the polymerase active site. Thus, the transition of DNA between the two active sites is an important activity of DNA polymerase. Here, based on our proposed model, the rates of DNA transition between the two active sites are theoretically studied. With the relevant parameters, which are determined from the available crystal structure and other experimental data, the calculated transfer rate of correctly base-paired DNA from the polymerase to exonuclease sites and the transfer rate after incorporation of a mismatched base are in good agreement with the available experimental data. The transfer rates in the presence of two and three mismatched bases are also consistent with the previous experimental data. In addition, the calculated transfer rate from the exonuclease to polymerase sites has a large value even with the high binding affinity of 3'-5' ssDNA for the exonuclease site, which is also consistent with the available experimental value. Moreover, we also give some predictive results for the transfer rate of DNA containing only A:T base pairs and that of DNA containing only G:C base pairs.

Restriction enzyme-free mutagenesis via the light regulation of DNA polymerization

The effects of photocaged nucleosides on the DNA polymerization reaction was investigated, finding that most polymerases are unable to recognize and read through the presence of a single caging group on the DNA template. Based on this discovery, a new method of introducing mutations into plasmid DNA via a light-mediated mutagenesis protocol was developed. This methodology is advantageous over several common approaches in that it requires the use of only two polymerase chain reaction primers, and does not require any restriction sites or use of restriction enzymes. Additionally, this approach enables not only site-directed mutations, but also the insertion of DNA strands of any length into plasmids and the deletion of entire genes from plasmids.

Mapping metal-binding sites in the catalytic domain of bacterial RNase P RNA

Ribonuclease P (RNase P) is a ribonucleoprotein enzyme that contains a universally conserved, catalytically active RNA component. RNase P RNA requires divalent metal ions for folding, substrate binding, and catalysis. Despite recent advances in understanding the structure of RNase P RNA, no comprehensive analysis of metal-binding sites has been reported, in part due to the poor crystallization properties of this large RNA. We have developed an abbreviated yet still catalytic construct, Bst P7Delta RNA, which contains the catalytic domain of the bacterial RNase P RNA and has improved crystallization properties. We use this mutant RNA as well as the native RNA to map metal-binding sites in the catalytic core of the bacterial RNase P RNA, by anomalous scattering in diffraction analysis. The results provide insight into the interplay between RNA structure and focalization of metal ions, and a structural basis for some previous biochemical observations with RNase P. We use electrostatic calculations to extract the potential functional significance of these metal-binding sites with respect to binding Mg(2+). The results suggest that with at least one important exception of specific binding, these sites mainly map areas of diffuse association of magnesium ions.

Replisome dynamics and use of DNA trombone loops to bypass replication blocks

Replisomes are dynamic multiprotein machines capable of simultaneously replicating both strands of the DNA duplex. This review focuses on the structure and function of the E. coli replisome, many features of which generalize to other bacteria and eukaryotic cells. For example, the bacterial replisome utilizes clamps and clamp loaders to coordinate the actions required of the trombone model of lagging strand synthesis made famous by Bruce Alberts. All cells contain clamps and clamp loaders and this review summarizes their structure and function. Clamp loaders are pentameric spirals that bind DNA in a structure specific fashion and thread it through the ring shaped clamp. The recent structure of the E. coli beta clamp in complex with primed DNA has implications for how multiple polymerases function on sliding clamps and how the primed DNA template is exchanged between them. Recent studies reveal a remarkable fluidity in replisome function that enables it to bypass template lesions on either DNA strand. During these processes the polymerases within the replisome functionally uncouple from one another. Mechanistic processes that underlie these actions may involve DNA looping, similar to the trombone loops that mediate the lagging strand Okazaki fragment synthesis cycle.

T7 RNA polymerase studied by force measurements varying cofactor concentration

RNA polymerases carry out the synthesis of an RNA copy from a DNA template. They move along DNA, incorporate nucleotide triphosphate (NTP) at the end of the growing RNA chain, and consume chemical energy. In a single-molecule assay using the T7 RNA polymerase, we study how a mechanical force opposing the forward motion of the enzyme along DNA affects the translocation rate. We also study the influence of nucleotide and magnesium concentration on this process. The experiment shows that the opposing mechanical force is a competitive inhibitor of nucleotide binding. Also, the single-molecule data suggest that magnesium ions are involved in a step that does not depend on the external load force. These kinetic results associated with known biochemical and mutagenic data, along with the static information obtained from crystallographic structures, shape a very coherent view of the catalytic cycle of the enzyme: translocation does not take place upon NTP binding nor upon NTP cleavage, but rather occurs after PPi release and before the next nucleotide binding event. Furthermore, the energetic bias associated with the forward motion of the enzyme is close to kT and represents only a small fraction of the free energy of nucleotide incorporation and pyrophosphate hydrolysis.

Human cytomegalovirus DNA replication: antiviral targets and drugs

Human cytomegalovirus (HCMV) infection is associated with severe morbidity and mortality in immunocompromised individuals, in particular transplant recipients and AIDS patients, and is the most frequent congenital viral infection in humans. There are currently five drugs approved for HCMV treatment: ganciclovir and its prodrug valganciclovir, foscarnet, cidofovir and fomivirsen. These drugs have provided a major advance in HCMV disease management, but they suffer from poor bioavailability, significant toxicity and limited effectiveness, mainly due to the development of drug resistance. Fortunately, there are several novel and potentially very effective new compounds which are under pre-clinical and clinical evaluation and may address these limitations. This review focuses on HCMV proteins that are directly or indirectly involved in viral DNA replication and represent already established or potential novel antiviral targets, and describes both currently available drugs and new compounds against such protein targets.

The proofreading exonuclease subunit epsilon of Escherichia coli DNA polymerase III is tethered to the polymerase subunit alpha via a flexible linker

Escherichia coli DNA polymerase III holoenzyme is composed of 10 different subunits linked by noncovalent interactions. The polymerase activity resides in the alpha-subunit. The epsilon-subunit, which contains the proofreading exonuclease site within its N-terminal 185 residues, binds to alpha via a segment of 57 additional C-terminal residues, and also to theta, whose function is less well defined. The present study shows that theta greatly enhances the solubility of epsilon during cell-free synthesis. In addition, synthesis of epsilon in the presence of theta and alpha resulted in a soluble ternary complex that could readily be purified and analyzed by NMR spectroscopy. Cell-free synthesis of epsilon from PCR-amplified DNA coupled with site-directed mutagenesis and selective 15N-labeling provided site-specific assignments of NMR resonances of epsilon that were confirmed by lanthanide-induced pseudocontact shifts. The data show that the proofreading domain of epsilon is connected to alpha via a flexible linker peptide comprising over 20 residues. This distinguishes the alpha : epsilon complex from other proofreading polymerases, which have a more rigid multidomain structure.

Mechanism of 4-chlorobenzoate:coenzyme a ligase catalysis

Within the accompanying paper in this issue (Reger et al. (2008) Biochemistry, 47, 8016-8025) we reported the X-ray structure of 4-chlorobenzoate:CoA ligase (CBL) bound with 4-chlorobenzoyl-adenylate (4-CB-AMP) and the X-ray structure of CBL bound with 4-chlorophenacyl-CoA (4-CP-CoA) (an inert analogue of the product 4-chlorobenzoyl-coenzyme A (4-CB-CoA)) and AMP. These structures defined two CBL conformational states. In conformation 1, CBL is poised to catalyze the adenylation of 4-chlorobenzoate (4-CB) with ATP (partial reaction 1), and in conformation 2, CBL is poised to catalyze the formation of 4-CB-CoA from 4-CB-AMP and CoA (partial reaction 2). These two structures showed that, by switching from conformation 1 to conformation 2, the cap domain rotates about the domain linker and thereby changes its interface with the N-terminal domain. The present work was carried out to determine the contributions made by each of the active site residues in substrate/cofactor binding and catalysis, and also to test the role of domain alternation in catalysis. In this paper, we report the results of steady-state kinetic and transient state kinetic analysis of wild-type CBL and of a series of site-directed CBL active site mutants. The major findings are as follows. First, wild-type CBL is activated by Mg (2+) (a 12-75-fold increase in activity is observed depending on assay conditions) and its kinetic mechanism (ping-pong) supports the structure-derived prediction that PP i dissociation must precede the switch from conformation 1 to conformation 2 and therefore CoA binding. Also, transient kinetic analysis of wild-type CBL identified the rate-limiting step of the catalyzed reaction as one that follows the formation of 4-CB-CoA (viz. CBL conformational change and/or product dissociation). The single turnover rate of 4-CB and ATP to form 4-CB-AMP and PP i ( k = 300 s (-1)) is not affected by the presence of CoA, and it is approximately 3-fold faster than the turnover rate of 4-CB-AMP and CoA to form 4-CB-CoA and AMP ( k = 120 s (-1)). Second, the active site mutants screened via steady-state kinetic analysis were ranked based on the degree of reduction observed in any one of the substrate k cat/ K m values, and those scoring higher than a 50-fold reduction in k cat/ K m value were selected for further evaluation via transient state kinetic analysis. The single-turnover time courses, measured for the first partial reaction, and then for the full reaction, were analyzed to define the microscopic rate constants for the adenylation reaction and the thioesterification reaction. On the basis of our findings we propose a catalytic mechanism that centers on a small group of key residues (some of which serve in more than one role) and that includes several residues that function in domain alternation.

Structure and function of 2:1 DNA polymerase.DNA complexes

DNA polymerases are required for DNA replication and DNA repair in all of the living organisms. Different DNA polymerases are responsible different stages of DNA metabolism, and many of them are multifunctional enzymes. It was generally assumed that the different reactions are catalyzed by the same enzyme molecule. In addition to 1:1 DNA polymerase.DNA complex reported by crystallization studies, 2:1 and higher order DNA polymerase.DNA complexes have been identified in solution studies by various biochemical and biophysical approaches. Further, abundant evidences for the DNA polymerase-DNA interactions in several DNA polymerases suggested that the 2:1 complex represents the more active form. This review describes the current status of this emerging subject and explores their potential in vitro and in vivo functional significance, particularly for the 2:1 complexes of mammalian DNA polymerase beta (Pol beta), the Klenow fragment of E. coli DNA polymerase I (KF), and T4 DNA polymerase.

Incorrect nucleotide insertion at the active site of a G:A mismatch catalyzed by DNA polymerase beta

Based on a recent ternary complex crystal structure of human DNA polymerase beta with a G:A mismatch in the active site, we carried out a theoretical investigation of the catalytic mechanism of incorrect nucleotide incorporation using molecular dynamics simulation, quantum mechanics, combined quantum mechanics, and molecular mechanics methods. A two-stage mechanism is proposed with a nonreactive active-site structural rearrangement prechemistry step occurring before the nucleotidyl transfer reaction. The free energy required for formation of the prechemistry state is found to be the major factor contributing to the decrease in the rate of incorrect nucleotide incorporation compared with correct insertion and therefore to fidelity enhancement. Hence, the transition state and reaction barrier for phosphodiester bond formation after the prechemistry state are similar to that for correct insertion reaction. Key residues that provide electrostatic stabilization of the transition state are identified.

Identification of a DNA primase template tracking site redefines the geometry of primer synthesis

Primases are essential RNA polymerases required for the initiation of DNA replication, lagging strand synthesis and replication restart. Many aspects of primase function remain unclear, including how the enzyme associates with a moving nucleic acid strand emanating from a helicase and orients primers for handoff to replisomal components. Using a new screening method to trap transient macromolecular interactions, we determined the structure of the Escherichia coli DnaG primase catalytic domain bound to single-stranded DNA. The structure reveals an unanticipated binding site that engages nucleic acid in two distinct configurations, indicating that it serves as a nonspecific capture and tracking locus for template DNA. Bioinformatic and biochemical analyses show that this evolutionarily constrained region enforces template polarity near the active site and is required for primase function. Together, our findings reverse previous proposals for primer-template orientation and reconcile disparate studies to re-evaluate replication fork organization.

Characterization of the DNA- and dNTP-binding activities of the human cytomegalovirus DNA polymerase catalytic subunit UL54

The catalytic subunit of the human cytomegalovirus DNA polymerase is critical for the replication of the virus. In the present study, we report the expression and purification of a recombinant catalytic subunit of the human cytomegalovirus DNA polymerase expressed in bacteria which retains polymerase activity. As a first step towards elucidating the nature of the interaction between the enzyme, DNA and dNTPs, we have utilized endogenous tryptophan fluorescence to evaluate the binding of ligands to the enzyme. Using this technique, we demonstrate that the minimal DNA-binding site of the enzyme is 6 nt. We also report the first detailed study of the binding kinetics and thermodynamic parameters involved in the interaction between the enzyme, DNA and dNTPs. Our thermodynamic analyses indicate that the initial formation of the enzyme-DNA binary complex is driven by a favourable entropy change, but is also clearly associated with an unfavourable enthalpic contribution. In contrast, the interaction of dNTPs to the binary complex was shown to depend on a completely different mode of binding that is dominated by a favourable enthalpy change and associated with an unfavourable entropy change. In order to provide additional insights into the structural modifications that occur during catalysis, we correlated the effect of DNA and dNTP binding on protein structure using CD. Our results indicate that the enzyme undergoes a first conformational change upon the formation of the protein-DNA binary complex, which is followed by a second structural modification upon dNTP binding. The present study provides a better understanding of the molecular basis of DNA and dNTP recognition by the catalytic subunit of the human cytomegalovirus DNA polymerase.

Fluorescence of 2-aminopurine reveals rapid conformational changes in the RB69 DNA polymerase-primer/template complexes upon binding and incorporation of matched deoxynucleoside triphosphates

We have used 2-aminopurine (2AP) as a fluorescent probe in the template strand of a 13/20mer primer/template (D) to detect deoxynucleoside triphosphates (N)-dependent conformational changes exhibited by RB69 DNA polymerase (ED) complexes. The rates and amplitudes of fluorescence quenching depend hyperbolically on the [dTTP] when a dideoxy-primer/template (ddP/T) with 2AP as the templating base (n position) is used. No detectable fluorescence changes occur when a ddP/T with 2AP positioned 5' to the templating base (n + 1 position) is used. With a deoxy-primer/template (dP/T) with 2AP in the n position, a rapid fluorescence quenching occurs within 2 ms, followed by a second, slower fluorescence quenching with a rate constant similar to base incorporation as determined by chemical quench. With a dP/T having 2AP in the n + 1 position, there is a [dNTP]-dependent fluorescence enhancement that occurs at a rate comparable to dNMP incorporation. Collectively, the results favor a minimal kinetic scheme in which population of two distinct biochemical states of the ternary EDN complex precedes the nucleotidyl transfer reaction. Observed differences between dP/T and ddP/T ternary complexes indicate that the 3' hydroxyl group of the primer plays a critical role in determining the rate constants of transitions that lead to strong deoxynucleoside triphosphate binding prior to chemistry.

Polymerase-catalyzed synthesis of DNA from phosphoramidate conjugates of deoxynucleotides and amino acids

Some selected amino acids, in particular L-aspartic acid (L-Asp) and L-histidine (L-His), can function as leaving group during polymerase-catalyzed incorporation of deoxyadenosine monophosphate (dAMP) in DNA. Although L-Asp-dAMP and L-His-dAMP bind, most probably, in a different way in the active site of the enzyme, aspartic acid and histidine can be considered as mimics of the pyrophosphate moiety of deoxyadenosine triphosphate. L-Aspartic acid is more efficient than D-aspartic acid as leaving group. Such P-N conjugates of amino acids and deoxynucleotides provide a novel experimental ground for diversifying nucleic acid metabolism in the field of synthetic biology.

The X family portrait: structural insights into biological functions of X family polymerases

The mammalian family X DNA polymerases (DNA polymerases beta, lambda, mu, and TdT) contribute to base excision repair and double-strand break repair by virtue of their ability to fill short gaps in DNA. Structural information now exists for all four of these enzymes, making this the first mammalian polymerase family whose structural portrait is complete. Here we consider how distinctive structural features of these enzymes contribute to their biological functions in vivo.

Accounting for ligand-bound metal ions in docking small molecules on adenylyl cyclase toxins

The adenylyl cyclase toxins produced by bacteria (such as the edema factor (EF) of Bacillus anthracis and CyaA of Bordetella pertussis) are important virulence factors in anthrax and whooping cough. Co-crystal structures of these proteins differ in the number and positioning of metal ions in the active site. Metal ions bound only to the ligands in the crystal structures are not included during the docking. To determine what effect these "missing" metals have on docking results, the AutoDock, LigandFit/Cerius2, and FlexX programs were compared for their ability to correctly place substrate analogues and inhibitors into the active sites of the crystal structures of EF, CyaA, and mammalian adenylate cyclase. Protonating the phosphates of substrate analogues improved the accuracy of docking into the active site of CyaA, where the grid did not account for one of the three Mg2+ ions in the crystal structure. The AutoDock ranking (based on docking energies) of a test group of compounds was relatively unaffected by protonation of carboxyl groups. However, the ranking by FlexX-ChemScore varied significantly, especially for docking to CyaA, suggesting that alternate protonation states should be tested when screening compound libraries with this program. When the charges on the bound metal were set correctly, AutoDock was the most reliable program of the three tested with respect to positioning substrate analogues and ranking compounds according to their experimentally determined ability to inhibit EF.

Following an environmental carcinogen N2-dG adduct through replication: elucidating blockage and bypass in a high-fidelity DNA polymerase

We have investigated how a benzo[a]pyrene-derived N²-dG adduct, 10S(+)-trans-anti-[BP]-N²-dG ([BP]G*), is processed in a well-characterized Pol I family model replicative DNA polymerase, Bacillus fragment (BF). Experimental results are presented that reveal relatively facile nucleotide incorporation opposite the lesion, but very inefficient further extension. Computational studies follow the possible bypass of [BP]G* through the pre-insertion, insertion and post-insertion sites as BF alternates between open and closed conformations. With dG* in the normal B-DNA anti conformation, BP seriously disturbs the polymerase structure, positioning itself either deeply in the pre-insertion site or on the crowded evolving minor groove side of the modified template, consistent with a polymerase-blocking conformation. With dG* in the less prevalent syn conformation, BP causes less distortion: it is either out of the pre-insertion site or in the major groove open pocket of the polymerase. Thus, the syn conformation can account for the observed relatively easy incorporation of nucleotides, with mutagenic purines favored, opposite the [BP]G* adduct. However, with the lesion in the BF post-insertion site, more serious distortions caused by the adduct even in the syn conformation explain the very inefficient extension observed experimentally. In vivo, a switch to a potentially error-prone bypass polymerase likely dominates translesion bypass.

Two proton transfers in the transition state for nucleotidyl transfer catalyzed by RNA- and DNA-dependent RNA and DNA polymerases

The rate-limiting step for nucleotide incorporation in the pre-steady state for most nucleic acid polymerases is thought to be a conformational change. As a result, very little information is available on the role of active-site residues in the chemistry of nucleotidyl transfer. For the poliovirus RNA-dependent RNA polymerase (3D(pol)), chemistry is partially (Mg(2+)) or completely (Mn(2+)) rate limiting. Here we show that nucleotidyl transfer depends on two ionizable groups with pK(a) values of 7.0 or 8.2 and 10.5, depending upon the divalent cation used in the reaction. A solvent deuterium isotope effect of three to seven was observed on the rate constant for nucleotide incorporation in the pre-steady state; none was observed in the steady state. Proton-inventory experiments were consistent with two protons being transferred during the rate-limiting transition state of the reaction, suggesting that both deprotonation of the 3'-hydroxyl nucleophile and protonation of the pyrophosphate leaving group occur in the transition state for phosphodiester bond formation. Importantly, two proton transfers occur in the transition state for nucleotidyl-transfer reactions catalyzed by RB69 DNA-dependent DNA polymerase, T7 DNA-dependent RNA polymerase and HIV reverse transcriptase. Interpretation of these data in the context of known polymerase structures suggests the existence of a general base for deprotonation of the 3'-OH nucleophile, although use of a water molecule cannot be ruled out conclusively, and a general acid for protonation of the pyrophosphate leaving group in all nucleic acid polymerases. These data imply an associative-like transition-state structure.

Inhibition of hepatitis B virus polymerase by entecavir

Entecavir (ETV; Baraclude) is a novel deoxyguanosine analog with activity against hepatitis B virus (HBV). ETV differs from the other nucleoside/tide reverse transcriptase inhibitors approved for HBV therapy, lamivudine (LVD) and adefovir (ADV), in several ways: ETV is >100-fold more potent against HBV in culture and, at concentrations below 1 microM, displays no significant activity against human immunodeficiency virus (HIV). Additionally, while LVD and ADV are obligate DNA chain terminators, ETV halts HBV DNA elongation after incorporating a few additional bases. Three-dimensional homology models of the catalytic center of the HBV reverse transcriptase (RT)-DNA-deoxynucleoside triphosphate (dNTP) complex, based on the HIV RT-DNA structure, were used with in vitro enzyme kinetic studies to examine the mechanism of action of ETV against HBV RT. A novel hydrophobic pocket in the rear of the RT dNTP binding site that accommodates the exocyclic alkene moiety of ETV was predicted, establishing a basis for the superior potency observed experimentally. HBV DNA chain termination by ETV was accomplished through disfavored energy requirements as well as steric constraints during subsequent nucleotide addition. Validation of the model was accomplished through modeling of LVD resistance substitutions, which caused an eightfold decrease in ETV susceptibility and were predicted to reduce, but not eliminate, the ETV-binding pocket, in agreement with experimental observations. ADV resistance changes did not affect the ETV docking model, also agreeing with experimental results. Overall, these studies explain the potency, mechanism, and cross-resistance profile of ETV against HBV and account for the successful treatment of naive and LVD- or ADV-experienced chronic HBV patients.

Expanding the repertoire of DNA polymerase substrates: template-instructed incorporation of non-nucleoside triphosphate analogues by DNA polymerases beta and lambda

We have recently shown that neither the base nor the sugar moieties of a nucleotide is an essential feature for its incorporation by DNA polymerases (pols) λ and β. Here we present the identification of novel non-nucleoside triphosphate (NNTP) derivatives belonging to three classes: (i) non-substrate-specific inhibitors of DNA pol λ; (ii) substrate inhibitors which could preferentially be incorporated by either DNA pol λ wild type or its Y505A mutant and (iii) the substrate inhibitor N-(Biphenylcarbonyl)-4-oxobutyl triphosphate which could be incorporated exclusively by DNA pol β in a Mg²⁺-dependent manner, and preferentially pairs with A on the template. This compound represents the first example of a substrate lacking both nucleobase and ribose residue, showing distinct base-pairing properties with normal bases. Therefore, this NNTP analog can be considered as the prototype of an entirely novel class of DNA pol substrates.

Chimeric thermostable DNA polymerases with reverse transcriptase and attenuated 3'-5' exonuclease activity

The synthesis of accurate, full-length cDNA from low-abundance RNA and the subsequent PCR amplification under conditions which provide amplicon that contains minimal mutations remain a difficult molecular biological process. Many of the challenges associated with performing sensitive, long RT/PCR have been alleviated by using a mixture of DNA polymerases. These mixtures have typically contained a DNA polymerase devoid of 3'-5' exonuclease, or "proofreading", activity blended with a small amount of an Archaea DNA polymerase possessing 3'-5' exonuclease activity, since reverse transcriptases lack 3'-5' exonuclease activity and generally have low fidelity. To create a DNA polymerase with efficient reverse transcriptase and 3'-5' exonuclease activity, a family of mutant DNA polymerases with a range of attenuated 3'-5' exonuclease activities was constructed from a chimeric DNA polymerase derived from Thermus species Z05 and Thermotoga maritima DNA polymerases. These "designer" DNA polymerases were fashioned using structure-based tools to identify amino acid residues involved in the substrate-binding site of the exonuclease domain of a thermostable DNA polymerase. Mutation of some of these residues resulted in proteins in which DNA polymerase activity was unaffected, while proofreading activity ranged from 60% of the wild-type level to undetectable levels. Kinetic characterization of the exonuclease activity indicated that the mutations affected catalysis much more than binding. On the basis of their specificity constants (kcat/KM), the mutant enzymes have a 5-15-fold stronger preference for a double-stranded mismatched substrate over a single-stranded substrate than the wild-type DNA polymerase, a desirable attribute for RT/PCR. The utility of these enzymes was evaluated in a RT/PCR assay to generate a 1.7 kb amplicon from HIV-1 RNA.

Bacterial RNase P: a new view of an ancient enzyme

Ribonuclease P (RNase P) is a ubiquitous endonuclease that catalyses the maturation of the 5' end of transfer RNA (tRNA). Although it carries out a biochemically simple reaction, RNase P is a complex ribonucleoprotein particle composed of a single large RNA and at least one protein component. In bacteria and some archaea, the RNA component of RNase P can catalyse tRNA maturation in vitro in the absence of proteins. The discovery of the catalytic activity of the bacterial RNase P RNA triggered numerous mechanistic and biochemical studies of the reactions catalysed by the RNA alone and by the holoenzyme and, in recent years, structures of individual components of the RNase P holoenzyme have been determined. The goal of the present review is to summarize what is known about the bacterial RNase P, and to bring together the recent structural results with extensive earlier biochemical and phylogenetic findings.

Crystal Structure of the Catalytic α Subunit of E. coli Replicative DNA Polymerase III

Bacterial replicative DNA polymerases such as Polymerase III (Pol III) share no sequence similarity with other polymerases. The crystal structure, determined at 2.3 A resolution, of a large fragment of Pol III (residues 1-917), reveals a unique chain fold with localized similarity in the catalytic domain to DNA polymerase beta and related nucleotidyltransferases. The structure of Pol III is strikingly different from those of members of the canonical DNA polymerase families, which include eukaryotic replicative polymerases, suggesting that the DNA replication machinery in bacteria arose independently. A structural element near the active site in Pol III that is not present in nucleotidyltransferases but which resembles an element at the active sites of some canonical DNA polymerases suggests that, at a more distant level, all DNA polymerases may share a common ancestor. The structure also suggests a model for interaction of Pol III with the sliding clamp and DNA.

Energy analysis of chemistry for correct insertion by DNA polymerase beta

X-ray crystallographic structures of human DNA polymerase beta with nonhydrolyzable analogs containing all atoms in the active site required for catalysis provide a secure starting point for a theoretical analysis (quantum mechanics/molecular mechanics) of the mechanism of chemistry without biasing of modeling assumptions as required in previous studies. These structures provide the basis for a detailed quantum mechanics/molecular mechanics study of the path for the complete transfer of a monophosphate nucleoside donor to the sugar acceptor in the active site. The reaction is largely associative with the main energetic step preceded by proton transfer from the terminal primer deoxyribose O3' to Asp-256. The key residues that provide electrostatic stabilization of the transition state are identified and compared with those identified by mutational studies.

Three-dimensional modeling of cytomegalovirus DNA polymerase and preliminary analysis of drug resistance

Cytomegalovirus (CMV) is the leading cause of congenital infection and a frequent opportunistic agent in immunocompromised hosts such as transplant recipients and AIDS patients. CMV DNA polymerase, a member of the polymerase B family, is the primary target of all available antivirals (ganciclovir, cidofovir, and foscarnet) and certain variations of this enzyme could lead to drug resistance. However, understanding the drug resistance mechanisms at the atomic level is hampered by the lack of its three-dimensional (3D) structure. In the present work, 3D models of two different conformations (closed and open) for CMV DNA polymerase have been built based on the crystal structures of bacteriophage RB69 DNA polymerase (a member of the polymerase B family) by using the 3D-Jury Meta server and the program MODELLER. Most of the variations on CMV DNA polymerase pertinent to ganciclovir/cidofovir and foscarnet resistance can be explained well based on the open and closed conformation models, respectively. These results constitute a first step towards facilitating our understanding of drug resistance mechanisms for CMV and the interpretation of novel viral mutations.

Tighter binding of HIV reverse transcriptase to RNA-DNA versus DNA-DNA results mostly from interactions in the polymerase domain and requires just a small stretch of RNA-DNA

Binding of HIV reverse transcriptase (RT) to unique substrates that positioned RNA-DNA or DNA-DNA near the polymerase or RNase H domains was measured. The substrates consisted of a 50 nucleotide template and DNA primers ranging from 23 to 43 nucleotides. Five different types of template strands were used: homogeneous (1) RNA or (2) DNA, (3) the first 20 5' nucleotides of DNA and the last 30 RNA, (4) the first 20 RNA and the last 30 DNA, and (5) 15 nucleotides of DNA followed by 5 RNA and then 30 DNA. The different length primers were designed to position RT over various regions of the template. Dissociation rate constants were determined for each of the substrates. Results showed that the severalfold tighter binding to RNA-DNA vs DNA-DNA was determined by binding in the polymerase domain and required only a short 5 base pair RNA-DNA hybrid region. Chimeric substrates with RNA-DNA positioned near the polymerase domain and DNA-DNA near the RNase H domain showed binding comparable to a complete RNA-DNA substrate, while those with the reverse orientation were comparable to DNA-DNA. Interestingly, the first configuration, though binding as tightly as RNA-DNA, could not be cleaved by RT RNase H activity, a finding that could perhaps be exploited in the development of nucleic acid-based inhibitors.

Mutagenic nucleotide incorporation and hindered translocation by a food carcinogen C8-dG adduct in Sulfolobus solfataricus P2 DNA polymerase IV (Dpo4): modeling and dynamics studies

Bulky carcinogen-DNA adducts commonly cause replicative polymerases to stall, leading to a switch to bypass polymerases. We have investigated nucleotide incorporation opposite the major adduct of 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP) in the DinB family polymerase, Dpo4, using molecular modeling and molecular dynamics (MD) simulations. PhIP, the most prevalent heterocyclic aromatic amine formed by cooking of proteinaceous food, is mutagenic in mammalian cells and is implicated in mammary and colon tumors. Our results show that the dG-C8-PhIP adduct can be accommodated in the spacious major groove Dpo4 open pocket, with Dpo4 capable of incorporating dCTP, dTTP or dATP opposite the adduct reasonably well. However, the PhIP ring system on the minor groove side would seriously disturb the active site, regardless of the presence and identity of dNTP. Furthermore, the simulations indicate that dATP and dTTP are better incorporated in the damaged system than in their respective mismatched but unmodified controls, suggesting that the PhIP adduct enhances incorporation of these mismatches. Finally, bulky C8-dG adducts, situated in the major groove, are likely to impede translocation in this polymerase (Rechkoblit et al. (2006), PLoS Biol., 4, e11). However, N²-dG adducts, which can reside on the minor groove side, appear to cause less hindrance when in this position.

Mutation of Phe102 to Ser in the carboxyl terminal helix of Escherichia coli thioredoxin affects the stability and processivity of T7 DNA polymerase

Processivity of T7 DNA polymerase relies on the coupling of its cofactor Escherichia coli thioredoxin (Trx) to gene 5 protein (gp5) at 1:1 stoichiometry. We designed a coexpression system for gp5 and Trx that allows in vivo reconstitution of subunits into a functional enzyme. The properties of this enzyme were compared with the activity of commercial T7 DNA polymerase. Examination of purified enzymes by sodium dodecyl sulfate-polyacrylamide gel electrophoresis revealed that the thioredoxin subunit of the two enzymes did not comigrate. To our surprise, we identified a mutation (Phe102 to Ser) in the Trx component from the commercial T7 DNA polymerase (gp5/TrxS102) that was not in the enzyme from the coexpression system (wild type gp5/Trx). A comparison of polymerase activity of the T7 DNA polymerases shows that both enzymes possessed similar specific activity but they were different in their residual activity at 37 degrees C. The half-life of gp5/TrxS102 was 7 min at 37 degrees C and 12 min for gp5/Trx. gp5/TrxS102 polymerase activity was reduced by fourfold with 3'-5' exonuclease activity as the prominent activity detected after 10 min of heat inactivation at 37 degrees C. Supplementation of reaction mixtures containing gp5/TrxS102 with exogenous nonmutant thioredoxin restored the enzyme activity levels. Pulse proteolysis was used to demonstrate that TrxS102 unfolded at lower urea concentrations than wild type thioredoxin. Thus, Ser substitution at position 102 affected the structural stability of thioredoxin resulting in a reduced binding affinity for gp5 and loss of processivity.

A new anti conformation for N-(deoxyguanosin-8-yl)-2-acetylaminofluorene (AAF-dG) allows Watson-Crick pairing in the Sulfolobus solfataricus P2 DNA polymerase IV (Dpo4)

Primer extension studies have shown that the Y-family DNA polymerase IV (Dpo4) from Sulfolobus solfataricus P2 can preferentially insert C opposite N-(deoxyguanosin-8-yl)-2-acetylaminofluorene (AAF-dG) [F. Boudsocq, S. Iwai, F. Hanaoka and R. Woodgate (2001) Nucleic Acids Res., 29, 4607–4616]. Our goal is to elucidate on a structural level how AAF-dG can be harbored in the Dpo4 active site opposite an incoming dCTP, using molecular modeling and molecular dynamics simulations, since AAF-dG prefers the syn glycosidic torsion. Both anti and syn conformations of the templating AAF-dG in a Dpo4 ternary complex were investigated. All four dNTPs were studied. We found that an anti glycosidic torsion with C1′-exo deoxyribose conformation allows AAF-dG to be Watson–Crick hydrogen-bonded with dCTP with modest polymerase perturbation, but other nucleotides are more distorting. The AAF is situated in the Dpo4 major groove open pocket with fluorenyl rings 3′- and acetyl 5′-directed along the modified strand, irrespective of dNTP. With AAF-dG syn, the fluorenyl rings are in the small minor groove pocket and the active site region is highly distorted. The anti-AAF-dG conformation with C1′-exo sugar pucker can explain the preferential incorporation of dC by Dpo4. Possible relevance of our new major groove structure for AAF-dG to other polymerases, lesion repair and solution conformations are discussed.

Site-directed mutations of T4 helicase loading protein (gp59) reveal multiple modes of DNA polymerase inhibition and the mechanism of unlocking by gp41 helicase

The T4 helicase loading protein (gp59) interacts with a multitude of DNA replication proteins. In an effort to determine the functional consequences of these protein-protein interactions, point mutations were introduced into the gp59 protein. Mutations were chosen based on the available crystal structure and focused on hydrophobic residues with a high degree of solvent accessibility. Characterization of the mutant proteins revealed a single mutation, Y122A, which is defective in polymerase binding and has weakened affinity for the helicase. The interaction between single-stranded DNA-binding protein and Y122A is unaffected, as is the affinity of Y122A for DNA substrates. When standard concentrations of helicase are employed, Y122A is unable to productively load the helicase onto forked DNA substrates. As a result of the loss of polymerase binding, Y122A cannot inhibit the polymerase during nucleotide idling or prevent it from removing the primer strand of a D-loop. However, Y122A is capable of inhibiting strand displacement synthesis by polymerase. The retention of strand displacement inhibition by Y122A, even in the absence of a gp59-polymerase interaction, indicates that there are two modes of polymerase inhibition by gp59. Inhibition of the polymerase activity only requires gp59 to bind to the replication fork, whereas inhibition of the exonuclease activity requires an interaction between the polymerase and gp59. The inability of Y122A to interact with both the polymerase and the helicase suggests a mechanism for polymerase unlocking by the helicase based on a direct competition between the helicase and polymerase for an overlapping binding site on gp59.

Selection of primer-template sequences that bind human immunodeficiency virus reverse transcriptase with high affinity

A SELEX (systematic evolution of ligands by exponential enrichment)-based approach was developed to determine whether HIV-RT showed preference for particular primer-template sequences. A 70 nt duplex DNA was designed with 20 nt fixed flanking sequences at the 3′ and 5′ ends and a randomized 30 nt internal sequence. The fixed sequence at the 5′ end contained a BbsI site six bases removed from the randomized region. BbsI cuts downstream of its recognition site generating four base 5′ overhangs with recessed 3′ termini. Cleavage produced a 50 nt template and 46 nt primer with the 3′ terminus within the randomized region. HIV-RT was incubated with this substrate and material that bound RT was isolated by gel-shift. The recovered material was treated to regenerate the BbsI site, amplified by PCR, cleaved with BbsI and selected with HIV-RT again. This was repeated for 12 rounds. Material from round 12 bound approximately 10-fold more tightly than starting material. All selected round 12 primer-templates had similar sequence configuration with a 6–8 base G run at the 3′ primer terminus, similar to the HIV polypurine tract. Further modifications indicate that the Gs were necessary and sufficient for strong binding.

Structures, mechanism, regulation and evolution of class III nucleotidyl cyclases

Cyclic 3',5'-guanylyl and adenylyl nucleotides function as second messengers in eukaryotic signal transduction pathways and as sensory transducers in prokaryotes. The nucleotidyl cyclases (NCs) that catalyze the synthesis of these molecules comprise several evolutionarily distinct groups, of which class III is the largest. The domain structures of prokaryotic and eukaryotic class III NCs are diverse, including a variety of regulatory and transmembrane modules. Yet all members of this family contain one or two catalytic domains, characterized by an evolutionarily ancient topological motif (betaalphaalphabetabetaalphabeta) that is preserved in several other enzymes that catalyze the nucleophilic attack of a 3'-hydroxyl upon a 5' nucleotide phosphate. Two dyad-related catalytic domains compose one catalytic unit, with the catalytic sites formed at the domain interface. The catalytic domains of mononucleotidyl cyclases (MNCs) and diguanylate cyclases (DGCs) are called cyclase homology domains (CHDs) and GGDEF domains, respectively. Prokaryotic NCs usually contain only one catalytic domain and are catalytically active as intermolecular homodimers. The different modes of dimerization in class III NCs probably evolved concurrently with their mode of binding substrate. The catalytic mechanism of GGDEF domain homodimers is not completely understood, but they are expected to have a single active site with each subunit contributing equivalent determinants to bind one GTP molecule or half a c-diGMP molecule. CHD dimers have two potential dyad-related active sites, with both CHDs contributing determinants to each site. Homodimeric class III MNCs have two equivalent catalytic sites, although such enzymes may show half-of-sites reactivity. Eukaryotic class III MNCs often contain two divergent CHDs, with only one catalytically competent site. All CHDs appear to use a common catalytic mechanism, which requires the participation of two magnesium or manganese ions for binding polyphosphate groups and nucleophile activation. In contrast, mechanisms for purine recognition and specificity are more diverse. Class III NCs are subject to regulation by small molecule effectors, endogenous domains, or exogenous protein partners. Many of these regulators act by altering the interface of the catalytic domains and therefore the integrity of the catalytic site(s). This review focuses on both conserved and divergent mechanisms of class III NC function and regulation.

Structure of Saccharomyces cerevisiae DNA polymerase epsilon by cryo-electron microscopy

The structure of the multisubunit yeast DNA polymerase epsilon (Pol epsilon) was determined to 20-A resolution using cryo-EM and single-particle image analysis. A globular domain comprising the catalytic Pol2 subunit is flexibly connected to an extended structure formed by subunits Dpb2, Dpb3 and Dpb4. Consistent with the reported involvement of the latter in interaction with nucleic acids, the Dpb portion of the structure directly faces a single cleft in the Pol2 subunit that seems wide enough to accommodate double-stranded DNA. Primer-extension experiments reveal that Pol epsilon processivity requires a minimum length of primer-template duplex that corresponds to the dimensions of the extended Dpb structure. Together, these observations suggest a mechanism for interaction of Pol epsilon with DNA that might explain how the structure of the enzyme contributes to its intrinsic processivity.