Electrochemical sensors and biosensors

Porphyrinic MOF Film for Multifaceted Electrochemical Sensing

Electrochemical sensors are indispensable in clinical diagnosis, biochemical detection and environmental monitoring, thanks to their ability to detect analytes in real‐time with direct electronic readout. However, electrochemical sensors are challenged by sensitivity—the need to detect low concentrations, and selectivity—to detect specific analytes in multicomponent systems. Herein, a porphyrinic metal‐organic framework (PP‐MOF), Mn‐PCN‐222 is deposited on a conductive indium tin oxide (ITO) surface. It affords Mn‐PCN‐222/ITO, a versatile voltammetric sensor able to detect redox‐active analytes such as inorganic ions, organic hazardous substances and pollutants, including nitroaromatics, phenolic and quinone‐hydroquinone toxins, heavy metal ions, biological species, as well as azo dyes. As a working electrode, the high surface area of Mn‐PCN‐222/ITO enables high currents, and therefore leverages highly sensitive analysis. The metalloporphyrin centre facilitates analyte‐specific redox catalysis to simultaneously detect more than one analyte in binary and ternary systems allowing for detection of a wide array of trace pollutants under real‐world conditions, most with high sensitivity.

Amperometric Biosensors Based on Direct Electron Transfer Enzymes

The accurate determination of analyte concentrations with selective, fast, and robust methods is the key for process control, product analysis, environmental compliance, and medical applications. Enzyme-based biosensors meet these requirements to a high degree and can be operated with simple, cost efficient, and easy to use devices. This review focuses on enzymes capable of direct electron transfer (DET) to electrodes and also the electrode materials which can enable or enhance the DET type bioelectrocatalysis. It presents amperometric biosensors for the quantification of important medical, technical, and environmental analytes and it carves out the requirements for enzymes and electrode materials in DET-based third generation biosensors. This review critically surveys enzymes and biosensors for which DET has been reported. Single- or multi-cofactor enzymes featuring copper centers, hemes, FAD, FMN, or PQQ as prosthetic groups as well as fusion enzymes are presented. Nanomaterials, nanostructured electrodes, chemical surface modifications, and protein immobilization strategies are reviewed for their ability to support direct electrochemistry of enzymes. The combination of both biosensor elements-enzymes and electrodes-is evaluated by comparison of substrate specificity, current density, sensitivity, and the range of detection.

Edge-Enhanced Microwell Immunoassay for Highly Sensitive Protein Detection

Highly sensitive biosensors that can detect low concentrations of protein biomarkers at the early stages of diseases or proteins secreted from single cells are of importance for disease diagnosis and treatment assessment. This work reports a new signal amplification mechanism, that is, edge enhancement based on the vertical sidewalls of microwells for ultra-sensitive protein detection. The fluorescence emission at the edge of the microwells is highly amplified due to the microscopic axial resolution (depth of field) and demonstrates a microring effect. The enhanced fluorescence intensity from microrings is calibrated for bovine serum albumin detection, which shows a 6-fold sensitivity enhancement and a lower limit of detection at the microwell edge, compared to those obtained on a flat surface. The microwell chip is used to separate single cells, and the wall of each microwell is used to detect interferon-γ secretion from T cells stimulated with a peptide and whole cancer cells. Given its edge-enhancement ability, the microwell technique can be a highly sensitive biosensing platform for disease diagnosis at an early stage and for assessing potential treatments at the single-cell level.

CRISPR/Cas13-Based Approaches for Ultrasensitive and Specific Detection of microRNAs

MicroRNAs (miRNAs) have a prominent role in virtually every aspect of cell biology. Due to the small size of mature miRNAs, the high degree of similarity between miRNA family members, and the low abundance of miRNAs in body fluids, miRNA expression profiling is technically challenging. Biosensors based on electrochemical detection for nucleic acids are a novel category of inexpensive and very sensitive diagnostic tools. On the other hand, after recognizing the target sequence, specific CRISPR-associated proteins, including orthologues of Cas12, Cas13, and Cas14, exhibit collateral nonspecific catalytic activities that can be employed for specific and ultrasensitive nucleic acid detection from clinically relevant samples. Recently, several platforms have been developed, connecting the benefits of enzyme-assisted signal amplification and enzyme-free amplification biosensing technologies with CRISPR-based approaches for miRNA detection. Together, they provide high sensitivity, precision, and fewer limitations in diagnosis through efficient sensors at a low cost and a simple miniaturized readout. This review provides an overview of several CRISPR-based biosensing platforms that have been developed and successfully applied for ultrasensitive and specific miRNA detection.

Portable Sensing Devices for Detection of COVID-19: A Review

The coronavirus pandemic is the most challenging incident that people have faced in recent years. Despite the time-consuming and expensive conventional methods, point-of-care diagnostics have a crucial role in deterrence, timely detection, and intensive care of the disease's progress. Hence, this detrimental health emergency persuaded researchers to accelerate the development of highly-scalable diagnostic devices to control the propagation of the virus even in the least developed countries. The strategies exploited for detecting COVID-19 stem from the already designed systems for studying other maladies, particularly viral infections. The present report reviews not only the novel advances in portable diagnostic devices for recognizing COVID-19, but also the previously existing biosensors for detecting other viruses. It discusses their adaptability for identifying surface proteins, whole viruses, viral genomes, host antibodies, and other biomarkers in biological samples. The prominence of different types of biosensors such as electrochemical, optical, and electrical for detecting low viral loads have been underlined. Thus, it is anticipated that this review will assist scientists who have embarked on a competition to come up with more efficient and marketable in-situ test kits for identifying the infection even in its incubation time without sample pretreatment. Finally, a conclusion is provided to highlight the importance of such an approach for monitoring people to combat the spread of such contagious diseases.

A polyA DNA probe-based ultra-sensitive and structure-distinguishable electrochemical biosensor for the analysis of RNAi transgenic maize

Since the application of RNA interference (RNAi) is rapidly developing in GMO technology, accurate and sensitive detection of functional RNA molecules was urgently needed, for the safety and functional assessment of RNAi crops. In this work, we developed an electrochemical biosensor for transgene-derived long RNA based on a poly-adenine (polyA) DNA capture probe. The polyA self-assembling monolayer (SAM) provided enhanced interface stability and optimized surface density for the subsequent hybridization of the long RNA molecule. A multiple reporter probe system (MRP) containing 12 reporter probes (RPs) and 2 spacers was applied to open the complex molecular secondary structure and hybridize with the long RNA, with the critical assistance of dimethyl sulfoxide (DMSO). By using 3 addressable RPs, structural recognition was performed among long stem-loop RNA, long dsRNA (no loop), and siRNA. Excellent selectivity was achieved when the extracted total RNA samples were directly analyzed. When reverse transcription recombinase polymerase amplification (RT-RPA) technology was combined, the sensitivity was improved to 10 aM. To the best of our knowledge, this is the first electrochemical biosensor with the excellent capability of quantification and structural analysis of the long RNA of the RNAi GMO. Our work shows great potential in a wide range of RNAi GMO samples.

Facile imprinted polymer for label-free highly selective potentiometric sensing of proteins: case of recombinant human erythropoietin

In the current study, a molecularly imprinted polymer (MIP)-based potentiometric sensor was fabricated for a label-free determination of recombinant human erythropoietin (rhEPO). The MIP sensor was operated under zero current conditions using tetra-butyl ammonium bromide as a marker ion. A highly ordered rhEPO surface imprinted layer was prepared using 3-aminopropyl triethoxysilane and tetraethoxysilane as a monomer and cross-linker, respectively, under mild reaction conditions. A two-fold increase in the signal output was obtained by polymeric surface minimization (0.5 mm) that allowed more pronounced molecular recognition (imprinting factor = 20.1). The proportion of cross-reactivity was examined using different interfering biomolecules. Results confirmed sensor specificity for both structurally related and unrelated proteins. An ~40% decrease in the response was obtained for rhEPO-β compared to rhEPO-α. The imprinted polymeric surface was evaluated using scanning electron microscopy and Fourier transform infrared spectroscopy. Under the optimal measurement conditions, a linear range of 10.00-1000.00 ng mL^-1 (10^-10 - 10^-8 M) was obtained. The sensor was employed for the determination of rhEPO in different biopharmaceutical formulations. Results were validated against standard immunoassay. Spiked human serum samples were analyzed and the assay was validated. The presence of non-specific proteins did not significantly affect (~8%) the results of our assay. A concentration-dependent linear response was produced in an identical range with detection limit as low as 6.50 ng mL^-1 (2.14 × 10^-10 M). The facile fabricated MIP sensor offers a cost-effective, portable, and easy to use alternative for biosimilarity assessment and clinical application.

A Carbon-Based Antifouling Nano-Biosensing Interface for Label-Free POCT of HbA1c

Electrochemical biosensing relies on electron transport on electrode surfaces. However, electrode inactivation and biofouling caused by a complex biological sample severely decrease the efficiency of electron transfer and the specificity of biosensing. Here, we designed a three-dimensional antifouling nano-biosensing interface to improve the efficiency of electron transfer by a layer of bovine serum albumin (BSA) and multi-walled carbon nanotubes (MWCNTs) cross-linked with glutaraldehyde (GA). The electrochemical properties of the BSA/MWCNTs/GA layer were investigated using both cyclic voltammetry and electrochemical impedance to demonstrate its high-efficiency antifouling nano-biosensing interface. The BSA/MWCNTs/GA layer kept 92% of the original signal in 1% BSA and 88% of that in unprocessed human serum after a 1-month exposure, respectively. Importantly, we functionalized the BSA/MWCNTs/GA layer with HbA1c antibody (anti-HbA1c) and 3-aminophenylboronic acid (APBA) for sensitive detection of glycated hemoglobin A (HbA1c). The label-free direct electrocatalytic oxidation of HbA1c was investigated by cyclic voltammetry (CV). The linear dynamic range of 2 to 15% of blood glycated hemoglobin A (HbA1c) in non-glycated hemoglobin (HbAo) was determined. The detection limit was 0.4%. This high degree of differentiation would facilitate a label-free POCT detection of HbA1c.

Capillary Microfluidics for Monitoring Medication Adherence

Medication adherence is a medical and societal issue worldwide, with approximately half of patients failing to adhere to prescribed treatments. The goal of this Minireview is to examine how recent work on microfluidics for point-of-care diagnostics may be used to enhance adherence to medication. It specifically focuses on capillary microfluidics since these devices are self-powered, easy to use, and well established for diagnostics and drug monitoring. Considering that an improvement in medication adherence can have a much larger effect than the development of new medical treatments, it is long overdue for the research communities working in chemistry, biology, pharmacology, and material sciences to consider developing technologies to enhance medication adherence. For these reasons, this Minireview is not meant to be exhaustive but rather to provide a quick starting point for researchers interested in joining this complex but intriguing and exciting field of research.

Point-of-care diagnostics for infectious diseases: From methods to devices

The current widespread of COVID-19 all over the world, which is caused by SARS-CoV-2 virus, has again emphasized the importance of development of point-of-care (POC) diagnostics for timely prevention and control of the pandemic. Compared with labor- and time-consuming traditional diagnostic methods, POC diagnostics exhibit several advantages such as faster diagnostic speed, better sensitivity and specificity, lower cost, higher efficiency and ability of on-site detection. To achieve POC diagnostics, developing POC detection methods and correlated POC devices is the key and should be given top priority. The fast development of microfluidics, micro electro-mechanical systems (MEMS) technology, nanotechnology and materials science, have benefited the production of a series of portable, miniaturized, low cost and highly integrated POC devices for POC diagnostics of various infectious diseases. In this review, various POC detection methods for the diagnosis of infectious diseases, including electrochemical biosensors, fluorescence biosensors, surface-enhanced Raman scattering (SERS)-based biosensors, colorimetric biosensors, chemiluminiscence biosensors, surface plasmon resonance (SPR)-based biosensors, and magnetic biosensors, were first summarized. Then, recent progresses in the development of POC devices including lab-on-a-chip (LOC) devices, lab-on-a-disc (LOAD) devices, microfluidic paper-based analytical devices (μPADs), lateral flow devices, miniaturized PCR devices, and isothermal nucleic acid amplification (INAA) devices, were systematically discussed. Finally, the challenges and future perspectives for the design and development of POC detection methods and correlated devices were presented. The ultimate goal of this review is to provide new insights and directions for the future development of POC diagnostics for the management of infectious diseases and contribute to the prevention and control of infectious pandemics like COVID-19.

Recent advances in ZnO nanostructure-based electrochemical sensors and biosensors

Nanostructured metal oxides, such as zinc oxide (ZnO), are considered as excellent materials for the fabrication of highly sensitive and selective electrochemical sensors and biosensors due to their good properties, including a high specific surface area, high catalytic efficiency, strong adsorption ability, high isoelectric point (IEP, 9.5), wide band gap (3.2 eV), biocompatibility and high electron communication features. Thus, ZnO nanostructures are widely used to fabricate efficient electrochemical sensors and biosensors for the detection of various analytes. In this review, we have discussed the synthesis of ZnO nanostructures and the advances in various ZnO nanostructure-based electrochemical sensors and biosensors for medical diagnosis, pharmaceutical analysis, food safety, and environmental pollution monitoring.

Review of Dissolved CO and H2 Measurement Methods for Syngas Fermentation

Syngas fermentation is a promising technique to produce biofuels using syngas obtained through gasified biomass and other carbonaceous materials or collected from industrial CO-rich off-gases. The primary components of syngas, carbon monoxide (CO) and hydrogen (H2), are converted to alcohols and other chemicals through an anaerobic fermentation process by acetogenic bacteria. Dissolved CO and H2 concentrations in fermentation media are among the most important parameters for successful and stable operation. However, the difficulties in timely and precise dissolved CO and H2 measurements hinder the industrial-scale commercialization of this technique. The purpose of this article is to provide a comprehensive review of available dissolved CO and H2 measurement methods, focusing on their detection mechanisms, CO and H2 cross interference and operations in syngas fermentation process. This paper further discusses potential novel methods by providing a critical review of gas phase CO and H2 detection methods with regard to their capability to be modified for measuring dissolved CO and H2 in syngas fermentation conditions.

Low Cost, Easy to Prepare and Disposable Electrochemical Molecularly Imprinted Sensor for Diclofenac Detection

In this work, a disposable electrochemical (voltammetric) molecularly imprinted polymer (MIP) sensor for the selective determination of diclofenac (DCF) was constructed. The proposed MIP-sensor permits fast (30 min) analysis, is cheap, easy to prepare and has the potential to be integrated with portable devices. Due to its simplicity and efficiency, surface imprinting by electropolymerization was used to prepare a MIP on a screen-printed carbon electrode (SPCE). MIP preparation was achieved by cyclic voltammetry (CV), using dopamine (DA) as a monomer in the presence of DCF. The differential pulse voltammetry (DPV) detection of DCF at MIP/SPCE and non-imprinted control sensors (NIP) showed an imprinting factor of 2.5. Several experimental preparation parameters were studied and optimized. CV and electrochemical impedance spectroscopy (EIS) experiments were performed to evaluate the electrode surface modifications. The MIP sensor showed adequate selectivity (in comparison with other drug molecules), intra-day repeatability of 7.5%, inter-day repeatability of 11.5%, a linear range between 0.1 and 10 μM (r² = 0.9963) and a limit of detection (LOD) and quantification (LOQ) of 70 and 200 nM, respectively. Its applicability was successfully demonstrated by the determination of DCF in spiked water samples (river and tap water).

A Molecularly Imprinted Sol-Gel Electrochemical Sensor for Naloxone Determination

A molecularly imprinted sol-gel is reported for selective and sensitive electrochemical determination of the drug naloxone (NLX). The sensor was developed by combining molecular imprinting and sol-gel techniques and electrochemically grafting the sol solution onto a functionalized multiwall carbon nanotube modified indium-tin oxide (ITO) electrode. The sol-gel layer was obtained from acid catalyzed hydrolysis and condensation of a solution composed of triethoxyphenylsilane (TEPS) and tetraethoxysilane (TES). The fabrication, structure and properties of the sensing material were characterized via scanning electron microscopy, spectroscopy and electrochemical techniques. Parameters affecting the sensor's performance were evaluated and optimized. A sensor fabricated under the optimized conditions responded linearly between 0.0 µM and 12 µM NLX, with a detection limit of 0.02 µM. The sensor also showed good run-to-run repeatability and batch-to-batch performance reproducibility with relative standard deviations (RSD) of 2.5-7.8% (n = 3) and 9.2% (n = 4), respectively. The developed sensor displayed excellent selectivity towards NLX compared to structurally similar compounds (codeine, fentanyl, naltrexone and noroxymorphone), and was successfully used to measure NLX in synthetic urine samples yielding recoveries greater than 88%.

Electrochemical profiling and liquid chromatography-mass spectrometry characterization of synthetic cathinones: From methodology to detection in forensic samples

The emergence of new psychoactive drugs in the market demands rapid and accurate tools for the on-site classification of illegal and legal compounds with similar structures. Herein, a novel method for the classification of synthetic cathinones (SCs) is presented based on their electrochemical profile. First, the electrochemical profile of five common SC (i.e., mephedrone, ethcathinone, methylone, butylone, and 4-chloro-alpha-pyrrolidinovalerophenone) is collected to build calibration curves using square wave voltammetry on graphite screen-printed electrodes (SPEs). Second, the elucidation of the oxidation pathways, obtained by liquid chromatography-high-resolution mass spectrometry, allows the pairing of the oxidation products to the SC electrochemical profile, providing a selective and robust classification. Additionally, the effect of common adulterants and illicit drugs on the electrochemical profile of the SC is explored. Interestingly, a cathodic pretreatment of the SPE allows the selective detection of each SC in presence of electroactive adulterants. Finally, the electrochemical approach is validated with gas chromatography-mass spectrometry by analyzing 26 confiscated samples from seizures and illegal webshops. Overall, the electrochemical method exhibits a successful classification of SC including structural derivatives, a crucial attribute in an ever-diversifying drug market.

Enantioselective recognition of amino acid based on electrochemical deposition and X-ray diffraction technology

Addition of D-Asp in the electrochemical deposition process of Bismuth film resulted the generation of a new diffraction peak in X-ray diffraction (XRD) spectrum. This phenomenon was not observed in the situation of L-Asp. The new diffraction peak might suggest D-Asp could result in the generation of a specific Bismuth structure. Enantioselective recognition of D- and L-Asp can be realized based on this new XRD peak. The limit of detection was determined to be 3.5 × 10^-8 and 1.7 × 10^-8 mol L^-1 for D- and L-Asp, respectively. The XRD spectra of electrodeposited Copper films fabricated in the presence of D- or L-Asp showed different lattice plane diffraction peak intensity ratios. The reason was believed to be chirality induced different binding capabilities of Asp enantiomers that influenced Copper film growth. Therefore, the combination of electrochemical deposition using Copper as metal source and XRD technology can be used to achieve enantioselective recognition of Asp. The limit of detection for D- and L-Asp were determined to be 1.5 × 10^-10 and 1.2 × 10^-11 mol L^-1, respectively.

Microbial Electrochemical Systems: Principles, Construction and Biosensing Applications

Microbial electrochemical systems are a fast emerging technology that use microorganisms to harvest the chemical energy from bioorganic materials to produce electrical power. Due to their flexibility and the wide variety of materials that can be used as a source, these devices show promise for applications in many fields including energy, environment and sensing. Microbial electrochemical systems rely on the integration of microbial cells, bioelectrochemistry, material science and electrochemical technologies to achieve effective conversion of the chemical energy stored in organic materials into electrical power. Therefore, the interaction between microorganisms and electrodes and their operation at physiological important potentials are critical for their development. This article provides an overview of the principles and applications of microbial electrochemical systems, their development status and potential for implementation in the biosensing field. It also provides a discussion of the recent developments in the selection of electrode materials to improve electron transfer using nanomaterials along with challenges for achieving practical implementation, and examples of applications in the biosensing field.

A highly-sensitive and selective antibody-like sensor based on molecularly imprinted poly(L-arginine) on COOH-MWCNTs for electrochemical recognition and detection of deoxynivalenol

A new strategy to mimic antibody for electrochemical recognition and detection of deoxynivalenol (DON) using a highly-sensitive and selective antibody-like sensor based on molecularly imprinted poly(l-arginine) (P-Arg-MIP) on carboxylic acid functionalized carbon nanotubes (COOH-MWCNTs) was proposed. l-arginine as functional monomer was screened to prepare imprinted electrode via its electro-polymerization in the presence of DON onto the surface of COOH-MWCNTs electrode coupled with theoretical calculation. Surface morphology, structural characteristics, and electrochemical properties of P-Arg-MIP/COOH-MWCNTs were characterized by SEM, EDS, FTIR, and CV, respectively. P-Arg-MIP/COOH-MWCNTs displayed relatively high conductivity, high effective surface area, antibody-like molecular recognition and affinity, and a good response towards DON in a linear range from 0.1 to 70 μM with LOD of 0.07 μM in wheat flour samples with satisfactory recovery and feasible practicability in comparison with HPLC. This method provides a promising biomimetic sensing platform for the determination of mycotoxins in food and agro-products.

A 3D electrochemical biosensor based on Super-Aligned Carbon NanoTube array for point-of-care uric acid monitoring

Uric acid analysis is extremely important for gout prognosis, diagnosis and treatment. Previous technologies either lack specificity or exhibit poor performance, and thus could not meet the need of Point-of-Care (POC) uric acid monitoring. Here we present for the first time, a novel electrochemical biosensor based on 3D Super-Aligned Carbon NanoTube (SACNT) array to facilitate POC uric acid monitoring. The working electrode of the biosensor is composed of an orderly 3D SACNT array immobilized with uricase through a precipitation and crosslinking procedure. Such biosensor possesses a higher enzyme density, significantly larger contact area with reactants and could maintain the intact SACNT structure and its excellent conductivity after modification. The developed 3D SACNT array electrochemical biosensor benefits from high specific surface area, high electro-catalytic activity and large contact area with analytes, and demonstrates high sensitivity of 518.8 μA/(mM⋅cm²), wide linear range of 100-1000 μM and low limit of detection of 1 μM for uric acid. Dynamic uric acid monitoring has been achieved using the presented biosensor. And the obtained results in serum samples had no significant difference compared with those obtained using the FDA-approved electrochemical analyzer (Paired T-test, p > 0.05). These demonstrated that the technology can potentially be applied in POC monitoring of other biomolecules to improve prognosis, diagnosis and treatment outcomes of metabolic diseases.

Magnetic nanomaterials based electrochemical (bio)sensors for food analysis

It is widely accepted that nanotechnology attracted more interest because of various values that nanomaterial applications offers in different fields. Recently, researchers have proposed nanomaterials based electrochemical sensors and biosensors as one of the potent alternatives or supplementary analytical tools to the conventional detection procedures that consumes a lot of time. Among different nanomaterials, researchers largely considered magnetic nanomaterials (MNMs) for developing and fabricating the electrochemical (bio)sensors for numerous utilizations. Among several factors, healthier and higher quality foods are the most important preferences of consumers and manufacturers. For this reason, developing new techniques for rapid, precise as well as sensitive determination of components or contaminants of foods is very important. Therefore, developing the new electrochemical (bio)sensors in food analysis is one of the key and effervescent research fields. In this review, firstly, we presented the properties and synthesis strategies of MNMs. Then, we summarized some of the recently developed MNMs-based electrochemical (bio)sensors for food analysis including detecting the antioxidants, synthetic food colorants, pesticides, heavy metal ions, antibiotics and other analytes (bisphenol A, nitrite and aflatoxins) from 2010 to 2020. Finally, the present review described advantages, challenges as well as future directions in this field.

Introducing polymer conductance in diagnostically relevant transduction

In this work we demonstrate that an impedance derived capacitance method is able to cleanly resolve the resonant conductance characteristics of an electrode-confined polymer film. In decorating the film with receptors, this conductance is thereafter modulated by the capturing of specific targets, demonstrated herein with C-reactive protein. This entirely reagentless and single step marker quantification is relevant to the drive of moving assays to a scaleable format requiring minimal user intervention.

•

Relaxation conductance was used to create a new transducer signal concept.

•

This relaxation conductance transducer signal concept was proved to be valid.

•

Conductive redox polymer was used as sensitive function for the new signal concept.

•

C-reactive protein was successfully detected in suitable low concentrations.

•

This transducer principle is equally applicable to any other target.

High-performance immunosensor for urine albumin using hybrid architectures of ZnO nanowire/carbon nanotube

In this work, the authors reported the hybrid architecture of carbon nanotube (CNT)-zinc oxide (ZnO) nanowire as a multi-functional probe in amperometric immunosensor for the detection of urine albumin. Low-cost substrate such as glass is possible because of novel low-temperature growth process of CNT/ZnO nanowires as a multi-function electrode in this sensor. Based on Schottky like behaviour this structure exhibit excellent high current density to achieve higher performance. Measurement of urine albumin is a new way for early detection of diabetic and also low concentration of it in culture media is also considered in order to verify the conversion of stem cells to liver cells. Human albumin serum antibody is used as a selective and sensitive part. The amperometric performance of immunosensor is studied and showed excellent performance for detection of albumin in urine samples. Very high linear range (from 3.3 ng/µl to 3.3 mg/µl) with a correlation coefficient of 0.825 and low detection limit (3.3 ng/µl or 4.96 × 10^-8 mol l^-1) are the main characteristics of this sensor. Due to the high dynamic range and sensitivity, this sensor was also used in medical diagnosis and biomedical applications.

Electrospun Nanofibers for Cancer Therapy

Lately, a remarkable progress has been recorded in the field of electrospinning for the preparation of numerous types of nanofiber scaffolds. These scaffolds present some remarkable features including high loading capacity and encapsulation efficiency, superficial area and porosity, potential for modification, structure for the co-delivery of various therapies, and cost-effectiveness. Their present and future applications for cancer diagnosis and treatment are promising and pioneering. In this chapter we provide a comprehensive overview of electrospun nanofibers (ESNFs) applications in cancer diagnosis and treatment, covering diverse types of drug-loaded electrospun nanofibers.

Recent advances in energy-saving chemiresistive gas sensors: A review

With the tremendous advances in technology, gas-sensing devices are being popularly used in many distinct areas, including indoor environments, industries, aviation, and detectors for various toxic domestic gases and vapors. Even though the most popular type of gas sensor, namely, resistive-based gas sensors, have many advantages over other types of gas sensors, their high working temperatures lead to high energy consumption, thereby limiting their practical applications, especially in mobile and portable devices. As possible ways to deal with the high-power consumption of resistance-based sensors, different strategies such as self-heating, MEMS technology, and room-temperature operation using especial morphologies, have been introduced in recent years. In this review, we discuss different types of energy-saving chemisresitive gas sensors including self-heated gas sensors, MEMS based gas sensors, room temperature operated flexible/wearable sensor and their application in the fields of environmental monitoring. At the end, the review will be concluded by providing a summary, challenges, recent trends, and future perspectives.

Electrochemical impedimetric biosensors, featuring the use of Room Temperature Ionic Liquids (RTILs): Special focus on non-faradaic sensing

Over the last decade, significant advancements have been made in the field of biosensing technology. With the rising demand for personalized healthcare and health management tools, electrochemical sensors are proving to be reliable solutions; specifically, impedimetric sensors are gaining considerable attention primarily due to their ability to perform label-free sensing. The novel approach of using Room Temperature Ionic Liquids (RTILs) to improve the sensitivity and stability of these detection systems makes long-term continuous sensing feasible towards a wide range of sensing applications, predominantly biosensing. Through this review, we aim to provide an update on current scientific progress in using impedimetric biosensing combined with RTILs for the development of sensitive biosensing platforms. This review also summarizes the latest trends in the field of biosensing and provides an update on the current challenges that remain unsolved.

Detection of Pb(II): Au Nanoparticle Incorporated CuBTC MOFs

In the present investigation, copper benzene tricarboxylate metal organic frameworks (CuBTC MOF) and Au nanoparticle incorporated CuBTC MOF (Au@CuBTC) were synthesized by the conventional solvothermal method in a round bottom flask at 105°C and kept in an oil bath. The synthesized CuBTC MOF and Au@CuBTC MOFs were characterized by structure using X-ray diffraction (XRD) spectroscopic methods including Fourier Transform Infrared spectroscopy, Raman Spectroscopy, X-ray Photoelectron Spectroscopy (XPS), and Energy dispersive spectroscopy (EDS). We also characterized them using morphological techniques such as Field emission scanning electron microscopy (FE-SEM), and electrochemical approaches that included cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). We examined thermal stability by thermogravimetric analysis (TG/DTA) and N₂ adsorption—desorption isotherm by Brunauer-Emmett-Teller (BET) surface area method. Both materials were tested for the detection of lead (II) ions in aqueous media. Au nanoparticle incorporated CuBTC MOF showed great affinity and selectivity toward Pb²⁺ ions and achieved a lower detection limit (LOD) of 1 nM/L by differential pulse voltammetry (DPV) technique, which is far below than MCL for Pb²⁺ ions (0.03 μM/L) suggested by the United States (U.S.) Environmental Protection Agency (EPA) drinking water regulations.

Facile strategy for immobilizing horseradish peroxidase on a novel acetate functionalized ionic liquid/MWCNT matrix for electrochemical biosensing

Facile yet simple platforms for the immobilization of biomolecules have always been a substantial requirement for the fabrication of proficient biosensors. In this study, we report a naphthyl substituted acetate functionalized ionic liquid (NpAc-IL) for the covalent anchoring of horseradish peroxidase (HRP), using which the direct electrochemistry of HRP was successfully accomplished and a H₂O₂ biosensor was developed. The naphthyl substitution on the NpAc-IL was utilized for the π-π stacking with the MWCNT modified GCE and the terminal -OCH₃ group of NpAc-IL was used for the covalent attachment with the free -NH₂ group of HRP via amide bond formation. High conducting nature of the newly designed ionic liquid (NpAc-IL), facilitated an improved communication with the deeply buried redox centre of the HRP, while the covalent bonding provided enhanced stability to the fabricated biosensor by stably holding the water soluble HRP enzyme on the electrode surface. Furthermore, incorporation of MWCNT on the sensor setup synergistically enhanced the sensitivity of the developed biosensor. Under optimized conditions, the fabricated biosensor showed an enhanced electrocatalytic reduction of H₂O₂ in the range of 0.01 to 2.07 mM with a limit of detection and sensitivity of 2.7 μM and 55.98 μA mM^-1 cm^-2 respectively. Further, the proposed biosensor was utilized for the sensing of H₂O₂ spiked in real samples. Moreover, the newly fabricated biosensor demonstrated excellent stability with improved sensitivity and selectivity towards H₂O₂ reduction. The superior analytical characteristics are attributed to the facile fabrication strategy using this newly developed acetate functionalized ionic liquid platform.

Acute Myocardial Infarction Biosensor: A Review From Bottom Up

Acute myocardial infarction (AMI) is a cardiovascular disease that is produced due to a deficiency of oxygen generating irreversible damage in the heart muscle. In diagnosis, electrocardiogram (ECG) investigation has been the main method but is insufficient, so approaches like the measurement of biomarkers levels in plasma or saliva have become one of the most commonly applied strategies for prognosis of AMI, as some of them are specifically related to a heart attack. Many tests are carrying on to determine biological markers changes, but usually, they present disadvantages related to time consumption and laborious work. To overcome the issues, researchers around the world have been developing different ways to enhance detection through the use of biosensors. These diagnostic devices have a biological sensing element associated to a physicochemical transducer that can be made from different materials and configurations giving place to different kinds of detection: Electrical/Electrochemical, Optical and Mechanical. In this review, the authors presents relevant investigations related to the most important biomarkers and biosensors used for their detection having in mind the nanotechnology participation in the process through the application of nanostructures as a good choice for device configuration.

Ultrasensitive electrochemical assay for microRNA-21 based on CRISPR/Cas13a-assisted catalytic hairpin assembly

MicroRNAs (miRNAs) are related to many biological processes and regarded as biomarkers of disease. Rapid, sensitive, and specific methods for miRNA assay are very important for early disease diagnostic and therapy. In the present work, an ultrasensitive electrochemical biosensing platform has been developed for miRNA-21 assay by combining CRISPR-Cas13a system and catalytic hairpin assembly (CHA). In the presence of miRNA-21, it would hybridize with the spacer region of Cas13a/crRNA duplex to activate the cleavage activity of CRISPR-Cas13a system, leading to the release of initiator of CHA to generate amplified electrochemical signals. Base on the CRISPR-Cas13a-mediated cascade signal amplification strategy, the developed electrochemical biosensing platform exhibited high sensitivity with a low detection limit of 2.6 fM (S/N = 3), indicating that the platform has great potential for application in early clinical diagnostic.

Gold Nanoparticle-Redox Ionic Liquid based Nanoconjugated Matrix as a Novel Multifunctional Biosensing Interface

Creation of interfaces with a prudent design for the immobilization of biomolecules is substantial in the construction of biosensors for real-time monitoring. Herein, an adept biosensing interface was developed using a nanoconjugated matrix and has been employed toward the electrochemical determination of hydrogen peroxide (H₂O₂). The anionic gold nanoparticle (AuNP) was electrostatically tethered to cationic redox ionic liquid (IL), to which the horseradish peroxidase (HRP) enzyme was covalently immobilized to form a nanobioconjugate. The anthracene-substituted, aldehyde-functionalized redox IL (CHO-AIL) was judiciously designed with the (i) imidazolium cation for electrostatic interaction with AuNPs, (ii) anthracene moiety to mediate the electron transfer, and (iii) free aldehydic group for covalent bonding with a free amine group of the enzyme. Thus, the water-soluble HRP is effectively bonded to the CHO-AIL on a glassy carbon electrode (GCE) via imine bond formation, which resulted in the formation of the HRP-CHO-AIL/GCE. Electrochemical investigations on the HRP-CHO-AIL/GCE reveal highly stable and distinct redox peaks for the anthracene/anthracenium couple at a formal potential (E°') of -0.47 V. Electrostatic tethering of anionic AuNPs to the HRP-CHO-AIL promotes the electron transfer process in the HRP-CHO-AIL/AuNPs/GCE, as observed by the reduction in the formal potential to -0.42 V along with the enhancement in peak currents. The HRP-CHO-AIL/AuNPs/GCE has been explored toward the electrocatalytic detection of H₂O₂, and the modified electrode demonstrated a linear response toward H₂O₂ in the concentration range of 0.02-2.77 mM with a detection limit of 3.7 μM. The developed biosensor ascertained predominant selectivity and sensitivity in addition to remarkable stability and reproducibility, corroborating the suitableness of the platform for the effectual biosensing of H₂O₂. The eminent performance realized with our biosensor setup is ascribed to the multifunctional efficacy of this newly designed nanobioconjugate.

Voltammetric pH sensor based on electrochemically modified pseudo-graphite

A nanocrystalline graphite-like amorphous carbon (graphite from the University of Idaho thermolyzed asphalt reaction, GUITAR) shares morphological features with classical graphites, including basal and edge planes (BP, EP). However, unlike graphites and other sp2-hybridized carbons, GUITAR has fast heterogenous electron transfer (HET) across its basal planes, and resistance to corrosion similar to sp3-C and boron-doped diamond electrodes. In this contribution, quinoid modified BP-GUITAR (q-GUITAR) is examined as a sensor for pH determination. This modification is performed by applying 2.0 V (vs. Ag/AgCl) for 150 seconds followed by 15 cyclic voltammetric scans from -0.7 to 1.0 V at 50 mV s-1 in 1.0 M H2SO4. The quinoid surface coverage of q-GUITAR is 1.35 × 10-9 mol cm-2, as measured by cyclic voltammetry. X-ray photoelectron spectroscopy analysis also confirms the high surface coverage. The quinoid surface concentration ranks highest in literature when compared with other basal plane graphitic materials. This yields a sensor that responds through a square wave voltammetric reduction peak shift of 63.3 mV per pH over a pH range from 0 to 11. The response on q-GUITAR is stable for >20 measurements and no surface re-activation is required between the measurements. The common interferents, Na+, K+ and dissolved oxygen, have no effect on the response of the q-GUITAR-based pH sensor.

Programmable 3D rigid clathrate hydrogels based on self-assembly of tetrahedral DNA and linker PCR products

A clathrate tetrahedral DNA gel was assembled by combining tetrahedral DNA and rigid linker PCR products to achieve visible detection of Salmonella spp. This method overcame the shortcomings of AuNPs in coloration and enriched the use of tetrahedral DNA for the visible detection of virtually any target concerned with pathogens.

A novel dual signal and label-free electrochemical aptasensor for mucin 1 based on hemin/graphene@PdPtNPs

A dual signal and label-free electrochemical aptasensor for mucin 1 was constructed based on hemin/graphene@PdPtNPs nanocomposite (H-Gr@PdPtNPs). Hemin attached on the graphene surface not only improves the solubility of graphene and acts as an in-situ electrochemical probe but also exhibits excellent peroxidase-like properties to electrocatalyze the reduction of H2O2. PdPtNPs also show outstanding catalytic capacity to the reduction of H2O2 and provide numerous binding sites for loading dDNA (mucin 1 aptamer and cDNA) to form the sensing interface. In the presence of mucin 1, due to the specific affinity between aptamer and mucin 1, double helix would be induced dissociation and the aptamer would be pulled off from the electrode. As a result, the electrochemical signals of hemin and H2O2 were recovered. Based on these properties, the label-free and sensitive dual signal electrochemical biosensor for mucin 1 detection has been developed. The one is differential pulse voltammetry (DPV) signal of hemin and the other is chronoamperometry signal arisen from the catalytic reduction of H2O2. The linear ranges for mucin 1 were 8.0 pg mL-1 to 80 ng mL-1 and 0.8 pg mL-1 to 80 ng mL-1 with the limit of detection 2.5 pg mL-1 and 0.25 pg mL-1 by DPV and chronoamperometry, respectively. The recovery of mucin 1 in human blood serum samples was from 95.0% to 104.2%. The detection platform does not need signal labeling which greatly reduced the sophisticated and expensive procedures. The aptasensor provide a promising strategy for the determination of mucin 1 in clinical diagnostics.

Phthalocyanine Modified Electrodes in Electrochemical Analysis

Phthalocyanines are aromatic or macrocyclic organic compounds and attract great attention due to their numerous properties. They have many high-tech applications in different areas of the industry such as dyestuffs, thermal printing screens, photovoltaic solar cells, membrane catalytic reactors, semiconductor materials and gas sensors. In the last decade, electrochemical sensor studies have accelerated with the catalytic lighting. It plays a dominant role in the development and implementation of new generation sensors. The aim of this study is to review the electrochemical methods based on electrode modification with phthalocyanines and to shed light on new application areas of phthalocyanines. The focal point was based on the sensor applications of phthalocyanines in the determination of drugs, pesticides, organic materials and metals etc. by electrochemical methods. Experimental conditions and some validation parameters of the sensor applications such as metal phthalocyanine types, indicator electrodes, selectivity, working ranges, detection limits, and analytical applications were discussed. Consequently, this is the first review dealing with the applications of phthalocyanines in electrochemical sensors for the sensitive determination of analytes in a variety of matrices.