High-Throughput Single Copy DNA Amplification and Cell Analysis in Engineered Nanoliter Droplets

DNA amplification via polymerase chain reaction inside miniemulsion droplets with subsequent poly(n-butylcyanoacrylate) shell formation and delivery of polymeric capsules into mammalian cells

There is a growing interest in the development of stable nanocapsules that could deliver the bioactive compounds within the living organism, and to release them without causing any toxic effects. Here the miniemulsion droplets were first used as "nanoreactors" for the amplification of single-molecule dsDNA template (476 and 790 base pairs) through PCR. Afterwards, each droplet was surrounded with a biodegradable PBCA shell by interfacial anionic polymerization, enabling therefore to deliver the PCR products into the cells. The size of the initial miniemulsion droplets and the final polymeric capsules was in the range of 250 and 320 nm, mainly depending on the type of the continuous phase and presence of dsDNA template molecules. The formation of PCR products was resolved with gel electrophoresis and detected with fluorescence spectroscopy in the presence of DNA specific dye (SYBRGreen). TEM studies were performed to prove the formation of the polymeric shell. The shell thickness was measured to be within 5-15 nm and the average molecular weight of the formed PBCA polymer was around 75000 g · mol(-1) . For the cell uptake experiments, the obtained nanocapsules were transferred from the organic phase into aqueous medium containing a water-soluble surfactant. The effect of the surfactant type (anionic, cationic or non-ionic) on the HeLa cell viability and nanocapsule uptake behavior was studied by CLSM and FACS. Confocal analysis demonstrated that nanocapsules stabilized with cationic (CTMA-Cl) and non-ionic (Lutensol AT50) surfactants show almost the same uptake, whereas capsules redispersed in anionic (SDS) surfactant possess a 30% higher uptake. The release of the encapsulated material within the cell was studied on the example of Cy5-labeled oligonucleotides showing the colocalization with mitochondria of MSCs cells.

Microfluidic devices for bioapplications

Harnessing the ability to precisely and reproducibly actuate fluids and manipulate bioparticles such as DNA, cells, and molecules at the microscale, microfluidics is a powerful tool that is currently revolutionizing chemical and biological analysis by replicating laboratory bench-top technology on a miniature chip-scale device, thus allowing assays to be carried out at a fraction of the time and cost while affording portability and field-use capability. Emerging from a decade of research and development in microfluidic technology are a wide range of promising laboratory and consumer biotechnological applications from microscale genetic and proteomic analysis kits, cell culture and manipulation platforms, biosensors, and pathogen detection systems to point-of-care diagnostic devices, high-throughput combinatorial drug screening platforms, schemes for targeted drug delivery and advanced therapeutics, and novel biomaterials synthesis for tissue engineering. The developments associated with these technological advances along with their respective applications to date are reviewed from a broad perspective and possible future directions that could arise from the current state of the art are discussed.

Droplet microfluidics for high-throughput analysis of cells and particles

Droplet microfluidics (DM) is an area of research which combines lab-on-a-chip (LOC) techniques with emulsion compartmentalization to perform high-throughput, chemical and biological assays. The key issue of this approach lies in the generation, over tens of milliseconds, of thousands of liquid vessels which can be used either as a carrier, to transport encapsulated particles and cells, or as microreactors, to perform parallel analysis of a vast number of samples. Each compartment comprises a liquid droplet containing the sample, surrounded by an immiscible fluid. This microfluidic technique is capable of generating subnanoliter and highly monodispersed liquid droplets, which offer many opportunities for developing novel single-cell and single-molecule studies, as well as high-throughput methodologies for the detection and sorting of encapsulated species in droplets. The aim of this chapter is to give an overview of the features of DM in a broad microfluidic context, as well as to show the advantages and limitations of the technology in the field of LOC analytical research. Examples are reported and discussed to show how DM can provide novel systems with applications in high-throughput, quantitative cell and particle analysis.

Development of an in vitro compartmentalization screen for high-throughput directed evolution of [FeFe] hydrogenases

Background

[FeFe] hydrogenase enzymes catalyze the formation and dissociation of molecular hydrogen with the help of a complex prosthetic group composed of common elements. The development of energy conversion technologies based on these renewable catalysts has been hindered by their extreme oxygen sensitivity. Attempts to improve the enzymes by directed evolution have failed for want of a screening platform capable of throughputs high enough to adequately sample heavily mutated DNA libraries. In vitro compartmentalization (IVC) is a powerful method capable of screening for multiple-turnover enzymatic activity at very high throughputs. Recent advances have allowed [FeFe] hydrogenases to be expressed and activated in the cell-free protein synthesis reactions on which IVC is based; however, IVC is a demanding technique with which many enzymes have proven incompatible.

Methodology/Principal Findings

Here we describe an extremely high-throughput IVC screen for oxygen-tolerant [FeFe] hydrogenases. We demonstrate that the [FeFe] hydrogenase CpI can be expressed and activated within emulsion droplets, and identify a fluorogenic substrate that links activity after oxygen exposure to the generation of a fluorescent signal. We present a screening protocol in which attachment of mutant genes and the proteins they encode to the surfaces of microbeads is followed by three separate emulsion steps for amplification, expression, and evaluation of hydrogenase mutants. We show that beads displaying active hydrogenase can be isolated by fluorescence-activated cell-sorting, and we use the method to enrich such beads from a mock library.

Conclusions/Significance

[FeFe] hydrogenases are the most complex enzymes to be produced by cell-free protein synthesis, and the most challenging targets to which IVC has yet been applied. The technique described here is an enabling step towards the development of biocatalysts for a biological hydrogen economy.

Microvalve Enabled Digital Microfluidic Systems for High Performance Biochemical and Genetic Analysis

Microfluidic devices offer unparalleled capability for digital microfluidic automation of sample processing and complex assay protocols in medical diagnostic and research applications. In our own work, monolithic membrane valves have enabled the creation of two platforms that precisely manipulate discrete, nanoliter-scale volumes of sample. The digital microfluidic Automaton uses two-dimensional microvalve arrays to combinatorially process nanoliter-scale sample volumes. This programmable system enables rapid integration of diverse assay protocols using a universal processing architecture. Microfabricated emulsion generator array (MEGA) devices integrate actively controlled 3-microvalve pumps to enable on-demand generation of uniform droplets for statistical encapsulation of microbeads and cells. A MEGA device containing 96 channels confers the capability of generating up to 3.4 × 10(6) nanoliter-volume droplets per hour for ultrahigh-throughput detection of rare mutations in a vast background of normal genotypes. These novel digital microfluidic platforms offer significant enhancements in throughput, sensitivity, and programmability for automated sample processing and analysis.

Ultrasensitive and high-throughput fluorescence analysis of droplet contents with orthogonal line confocal excitation

This paper describes a simple modification to traditional confocal fluorescence detection that greatly improves signal-to-noise (s/n) for the high-speed analysis of droplet streams. Rather than using the conventional epi geometry, illumination of the droplet was in the form of a line that is orthogonal to both the direction of flow and the light-collection objective. In contrast to the epi geometry where we observed high levels of scattering background from the droplets, we detected more than 10-fold less background (depending on the laser power used) when orthogonal-line-confocal illumination was used. We characterized this improvement using a standard microfluidic platform over a range of analyte concentrations and observed an improvement in limits of detection of greater than 10. Using this method, we were able to analyze picomolar concentrations of analytes contained within picoliter-volume droplets at a rate of greater than 350 droplets per second.

Agarose droplet microfluidics for highly parallel and efficient single molecule emulsion PCR

An agarose droplet method was developed for highly parallel and efficient single molecule emulsion PCR. The method capitalizes on the unique thermoresponsive sol-gel switching property of agarose for highly efficient DNA amplification and amplicon trapping. Uniform agarose solution droplets generated via a microfluidic chip serve as robust and inert nanolitre PCR reactors for single copy DNA molecule amplification. After PCR, agarose droplets are gelated to form agarose beads, trapping all amplicons in each reactor to maintain the monoclonality of each droplet. This method does not require cocapsulation of primer labeled microbeads, allows high throughput generation of uniform droplets and enables high PCR efficiency, making it a promising platform for many single copy genetic studies.

Large-scale arrays of picolitre chambers for single-cell analysis of large cell populations

We present a new method to analyze the cytoplasmic contents of single cells in large cell populations. This new method consists of an array of microchambers in which individual cells are collected, enclosed, and lysed to create a reaction mixture of the cytoplasm with extracellular detection agents. This approach was tested for the analysis of red blood cells in 10,000 microchambers in parallel. Single cells were routinely collected in more than 60% of microchambers, the collected cells were robustly (up to 99%) lysed by electric fields, and the cytoplasm enclosed in each microchamber was analyzed with fluorescence microscopy. Using a heterogeneous cell mixture, we verified that the new method could distinguish individual cells by cytoplasmic composition and the analysis compared well with conventional flow-cytometric evaluation of mixed cell populations. In contrast to flow-cytometry, the new method monitored single cells over time, thus characterizing the distributions of caspase activities of 5000 individual cells. This approach should be interesting for a variety of applications that would benefit from the ability to measure the distribution of cytoplasmic compounds in complex cell populations, including hematology, oncology, and immunology.

Digital PCR on a SlipChip

This paper describes a SlipChip to perform digital PCR in a very simple and inexpensive format. The fluidic path for introducing the sample combined with the PCR mixture was formed using elongated wells in the two plates of the SlipChip designed to overlap during sample loading. This fluidic path was broken up by simple slipping of the two plates that removed the overlap among wells and brought each well in contact with a reservoir preloaded with oil to generate 1280 reaction compartments (2.6 nL each) simultaneously. After thermal cycling, end-point fluorescence intensity was used to detect the presence of nucleic acid. Digital PCR on the SlipChip was tested quantitatively by using Staphylococcus aureus genomic DNA. As the concentration of the template DNA in the reaction mixture was diluted, the fraction of positive wells decreased as expected from the statistical analysis. No cross-contamination was observed during the experiments. At the extremes of the dynamic range of digital PCR the standard confidence interval determined using a normal approximation of the binomial distribution is not satisfactory. Therefore, statistical analysis based on the score method was used to establish these confidence intervals. The SlipChip provides a simple strategy to count nucleic acids by using PCR. It may find applications in research applications such as single cell analysis, prenatal diagnostics, and point-of-care diagnostics. SlipChip would become valuable for diagnostics, including applications in resource-limited areas after integration with isothermal nucleic acid amplification technologies and visual readout.

Selected technologies for measuring acquired genetic damage in humans

Technical advances have improved the capacity to detect and quantify genetic variants, providing novel methods for the detection of rare mutations and for better understanding the underlying environmental factors and biological mechanisms contributing to mutagenesis. The polymerase chain reaction (PCR) has revolutionized genetic testing and remains central to many of these new techniques for mutation detection. Millions of genetic variations have been discovered across the genome. These variations include germline mutations and polymorphisms, which are inherited in a Mendelian manner and present in all cells, as well as acquired, somatic mutations that differ widely by type and size [from single-base mutations to whole chromosome rearrangements, and including submicroscopic copy number variations (CNVs)]. This review focuses on current methods for assessing acquired somatic mutations in the genome, and it examines their application in molecular epidemiology and sensitive detection and analysis of disease. Although older technologies have been exploited for detecting acquired mutations in cancer and other disease, the high-throughput and high-sensitivity offered by next-generation sequencing (NGS) systems are transforming the discovery of disease-associated acquired mutations by enabling comparative whole-genome sequencing of diseased and healthy tissues from the same individual. Emerging microfluidic technologies are beginning to facilitate single-cell genetic analysis of target variable regions for investigating cell heterogeneity within tumors as well as preclinical detection of disease. The technologies discussed in this review will significantly expand our knowledge of acquired genetic mutations and causative mechanisms.

Massively parallel detection of gene expression in single cells using subnanolitre wells

The relationship between the expression of particular genes in cells and their impact on phenotypic characteristics is important for understanding how cells regulate responses to their environment. We have developed a microwell-based method to detect copies of mRNA transcripts directly from individual cells by one-step, single-cell, reverse transcription polymerase chain reaction (RT-PCR). Our approach permits the detection of mRNA transcripts of interest for more than 6000 single cells in parallel per assay with high sensitivity and specificity for constitutively active genes. This simple method was also combined with microengraving and image-based cytometry to examine the relationships between gene expression and cellular secretion of antibodies in a clonal population. We observed that most individual human B cell hybridomas transcribed a requisite gene for their antibodies, but only a subset of those cells secreted the antibody. The technique should also allow the detection of replicating intracellular pathogens such as retroviruses.

Droplet-based microsystem for multi-step bioreactions

A droplet-based microfluidic platform was used to perform on-chip droplet generation, merging and mixing for applications in multi-step reactions and assays. Submicroliter-sized droplets can be produced separately from three identical droplet-generation channels and merged together in a single chamber. Three different mixing strategies were used for mixing the merged droplet. For pure diffusion, the reagents were mixed in approximately 10 min. Using flow around the stationary droplet to induce circulatory flow within the droplet, the mixing time was decreased to approximately one minute. The shortest mixing time (10 s) was obtained with bidirectional droplet motion between the chamber and channel, and optimization could result in a total time of less than 1 s. We also tested this on-chip droplet generation and manipulation platform using a two-step thermal cycled bioreaction: nested TaqMan PCR. With the same concentration of template DNA, the two-step reaction in a well-mixed merged droplet shows a cycle threshold of approximately 6 cycles earlier than that in the diffusively mixed droplet, and approximately 40 cycles earlier than the droplet-based regular (single-step) TaqMan PCR.

Microfluidic systems for biosensing

In the past two decades, Micro Fluidic Systems (MFS) have emerged as a powerful tool for biosensing, particularly in enriching and purifying molecules and cells in biological samples. Compared with conventional sensing techniques, distinctive advantages of using MFS for biomedicine include ultra-high sensitivity, higher throughput, in-situ monitoring and lower cost. This review aims to summarize the recent advancements in two major types of micro fluidic systems, continuous and discrete MFS, as well as their biomedical applications. The state-of-the-art of active and passive mechanisms of fluid manipulation for mixing, separation, purification and concentration will also be elaborated. Future trends of using MFS in detection at molecular or cellular level, especially in stem cell therapy, tissue engineering and regenerative medicine, are also prospected.

High-performance single cell genetic analysis using microfluidic emulsion generator arrays

High-throughput genetic and phenotypic analysis at the single cell level is critical to advance our understanding of the molecular mechanisms underlying cellular function and dysfunction. Here we describe a high-performance single cell genetic analysis (SCGA) technique that combines high-throughput microfluidic emulsion generation with single cell multiplex polymerase chain reaction (PCR). Microfabricated emulsion generator array (MEGA) devices containing 4, 32, and 96 channels are developed to confer a flexible capability of generating up to 3.4 x 10(6) nanoliter-volume droplets per hour. Hybrid glass-polydimethylsiloxane diaphragm micropumps integrated into the MEGA chips afford uniform droplet formation, controlled generation frequency, and effective transportation and encapsulation of primer functionalized microbeads and cells. A multiplex single cell PCR method is developed to detect and quantify both wild type and mutant/pathogenic cells. In this method, microbeads functionalized with multiple forward primers targeting specific genes from different cell types are used for solid-phase PCR in droplets. Following PCR, the droplets are lysed and the beads are pooled and rapidly analyzed by multicolor flow cytometry. Using Escherichia coli bacterial cells as a model, we show that this technique enables digital detection of pathogenic E. coli O157 cells in a high background of normal K12 cells, with a detection limit on the order of 1/10(5). This result demonstrates that multiplex SCGA is a promising tool for high-throughput quantitative digital analysis of genetic variation in complex populations.

Measurement of single-cell dynamics

Populations of cells are almost always heterogeneous in function and fate. To understand the plasticity of cells, it is vital to measure quantitatively and dynamically the molecular processes that underlie cell-fate decisions in single cells. Early events in cell signalling often occur within seconds of the stimulus, whereas intracellular signalling processes and transcriptional changes can take minutes or hours. By contrast, cell-fate decisions, such as whether a cell divides, differentiates or dies, can take many hours or days. Multiparameter experimental and computational methods that integrate quantitative measurement and mathematical simulation of these noisy and complex processes are required to understand the highly dynamic mechanisms that control cell plasticity and fate.

Multiphase bioreaction microsystem with automated on-chip droplet operation

A droplet-based bioreaction microsystem has been developed with automated droplet generation and confinement. On-chip electronic sensing is employed to track the position of the droplets by sensing the oil/aqueous interface in real time. The sensing signal is also used to control the pneumatic supply for moving as well as automatically generating four different nanolitre-sized droplets. The actual size of droplets is very close to the designed droplet size with a standard deviation less than 3% of the droplet size. The automated droplet generation can be completed in less than 2 s, which is 5 times faster than using manual operation that takes at least 10 s. Droplets can also be automatically confined in the reaction region with feedback pneumatic control and digital or analog sensing. As an example bioreaction, PCR has been successfully performed in the automated generated droplets. Although the amplification yield was slightly reduced with the droplet confinement, especially while using the analog sensing method, adding additional reagents effectively alleviated this inhibition.

A digital microfluidic platform for the automation of quantitative biomolecular assays

A digital microfluidic platform for the automation of quantitative, multi-step biomolecular assays is developed and optimized. The platform consists of a 2-dimensional array of microvalves that can be programmed to perform reagent routing, mixing, rinsing, serial dilution, and many other operations using nanolitre scale volumes of sample. Discrete transfer of fluid between microvalves is characterized using gravimetric flow analysis and optimized to achieve maximum efficiency. Protocols for on-chip reagent mixing and serial dilution are optimized to achieve linearity over a 1000-fold dilution range. These optimized programs are used to develop a rapid, quantitative assay for hydrogen peroxide, a biomarker of oxidative stress. A sub-micromolar limit of detection is demonstrated with an 8.5 min program runtime, thus establishing this platform as an effective tool for the automation of multi-step bioassays. The programmability of this system enables rapid development of diverse assay protocols on a common chip format.

Microfluidic stochastic confinement enhances analysis of rare cells by isolating cells and creating high density environments for control of diffusible signals

Rare cells can be difficult to analyze because they either occur in low numbers or coexist with a more abundant cell type, yet their detection is crucial for diagnosing disease and maintaining human health. In this tutorial review, we introduce the concept of microfluidic stochastic confinement for use in detection and analysis of rare cells. Stochastic confinement provides two advantages: (1) it separates rare single cells from the bulk mixture and (2) it allows signals to locally accumulate to a higher concentration around a single cell than in the bulk mixture. Microfluidics is an attractive method for implementing stochastic confinement because it provides simple handling of small volumes. We present technologies for microfluidic stochastic confinement that utilize both wells and droplets for the detection and analysis of single cells. We address how these microfluidic technologies have been used to observe new behavior, increase speed of detection, and enhance cultivation of rare cells. We discuss potential applications of microfluidic stochastic confinement to fields such as human diagnostics and environmental testing.

Counting single molecules in sub-nanolitre droplets

We demonstrate single biomolecule detection and quantification within sub-nanolitre droplets through application of Cylindrical Illumination Confocal Spectroscopy (CICS) and droplet confinement within a retractable microfluidic constriction.

Single cell optical transfection

The plasma membrane of a eukaryotic cell is impermeable to most hydrophilic substances, yet the insertion of these materials into cells is an extremely important and universal requirement for the cell biologist. To address this need, many transfection techniques have been developed including viral, lipoplex, polyplex, capillary microinjection, gene gun and electroporation. The current discussion explores a procedure called optical injection, where a laser field transiently increases the membrane permeability to allow species to be internalized. If the internalized substance is a nucleic acid, such as DNA, RNA or small interfering RNA (siRNA), then the process is called optical transfection. This contactless, aseptic, single cell transfection method provides a key nanosurgical tool to the microscopist-the intracellular delivery of reagents and single nanoscopic objects. The experimental possibilities enabled by this technology are only beginning to be realized. A review of optical transfection is presented, along with a forecast of future applications of this rapidly developing and exciting technology.

Integrated microfluidic device for serum biomarker quantitation using either standard addition or a calibration curve

Detection and accurate quantitation of biomarkers such as alpha-fetoprotein (AFP) can be a key aspect of early stage cancer diagnosis. Microfluidic devices provide attractive analysis capabilities, including low sample and reagent consumption, as well as short assay times. However, to date microfluidic analyzers have relied almost exclusively on calibration curves for sample quantitation, which can be problematic for complex mixtures such as human serum. We have fabricated integrated polymer microfluidic systems that can quantitatively determine fluorescently labeled AFP in human serum using either the method of standard addition or a calibration curve. Our microdevices couple an immunoaffinity purification step with rapid microchip electrophoresis separation in a laser-induced fluorescence detection system, all under automated voltage control in a miniaturized polymer microchip. In conjunction with laser-induced fluorescence detection, these systems can quantify AFP at approximately 1 ng/mL levels in approximately 10 microL of human serum in a few tens of minutes. Our polymer microdevices have been applied in determining AFP in spiked serum samples. These integrated microsystems offer excellent potential for rapid, simple, and accurate biomarker quantitation in a point-of-care setting.

PMMA/PDMS valves and pumps for disposable microfluidics

Poly(methyl methacrylate) (PMMA) is gaining in popularity in microfluidic devices because of its low cost, excellent optical transparency, attractive mechanical/chemical properties, and simple fabrication procedures. It has been used to fabricate micromixers, PCR reactors, CE and many other microdevices. Here we present the design, fabrication, characterization and application of pneumatic microvalves and micropumps based on PMMA. Valves and pumps are fabricated by sandwiching a PDMS membrane between PMMA fluidic channel and manifold wafers. Valve closing or opening can be controlled by adjusting the pressure in a displacement chamber on the pneumatic layer via a computer regulated solenoid. The valve provides up to 15.4 microL s(-1) at 60 kPa fluid pressure and seals reliably against forward fluid pressure as high as 60 kPa. A PMMA diaphragm pump can be assembled by simply connecting three valves in series. By varying valve volume or opening time, pumping rates ranging from nL to microL per second can be accurately achieved. The PMMA based valves and pumps were further tested in a disposable automatic nucleic acid extraction microchip to extract DNA from human whole blood. The DNA extraction efficiency was about 25% and the 260 nm/280 nm UV absorption ratio for extracted DNA was 1.72. Because of its advantages of inexpensive, facile fabrication, robust and easy integration, the PMMA valve and pump will find their wide application for fluidic manipulation in portable and disposable microfluidic devices.

Product length, dye choice, and detection chemistry in the bead-emulsion amplification of millions of single DNA molecules in parallel

The amplification of millions of single molecules in parallel can be performed on microscopic magnetic beads that are contained in aqueous compartments of an oil-buffer emulsion. These bead-emulsion amplification (BEA) reactions result in beads that are covered by almost-identical copies derived from a single template. The post-amplification analysis is performed using different fluorophore-labeled probes. We have identified BEA reaction conditions that efficiently produce longer amplicons of up to 450 base pairs. These conditions include the use of a Titanium Taq amplification system. Second, we explored alternate fluorophores coupled to probes for post-PCR DNA analysis. We demonstrate that four different Alexa fluorophores can be used simultaneously with extremely low crosstalk. Finally, we developed an allele-specific extension chemistry that is based on Alexa dyes to query individual nucleotides of the amplified material that is both highly efficient and specific.

On-chip electrocoalescence of microdroplets as a function of voltage, frequency and droplet size

Electric fields have previously been used in microfluidic devices for the manipulation, sorting and mixing of microemulsions. Here, an active system for on-demand electrocoalescence of water droplets in oil is presented. The platform does not require precise electrode alignment nor droplet-droplet or droplet-electric field synchronisation. Droplets can be reliably merged in pairs at a rate up to 50 fusion events per second. The fusion mechanism is based on the balance between viscous, electric and interfacial stresses at the droplet interface and depends upon the flow behaviour in the microchannel. Experimental results show that, under different conditions of frequency, applied potential and size of the droplets with respect to the channel geometry, diverse types of droplet coalescence occur. The fusion mechanism and general trends which enabled different merging results are proposed. This system has potential for being applied and multiplexed for high throughput, emulsion-based applications in the field of combinatorial reactions and screening bioassays.

High-throughput quantitative polymerase chain reaction in picoliter droplets

Limiting dilution PCR has become an increasingly useful technique for the detection and quantification of rare species in a population, but the limit of detection and accuracy of quantification are largely determined by the number of reactions that can be analyzed. Increased throughput may be achieved by reducing the reaction volume and increasing processivity. We have designed a high-throughput microfluidic chip that encapsulates PCR reagents in millions of picoliter droplets in a continuous oil flow. The oil stream conducts the droplets through alternating denaturation and annealing zones, resulting in rapid (55-s cycles) and efficient PCR amplification. Inclusion of fluorescent probes in the PCR reaction mix permits the amplification process to be monitored within individual droplets at specific locations within the microfluidic chip. We show that amplification of a 245-bp adenovirus product can be detected and quantified in 35 min at starting template concentrations as low as 1 template molecule/167 droplets (0.003 pg/microL). The frequencies of positive reactions over a range of template concentrations agree closely with the frequencies predicted by Poisson statistics, demonstrating both the accuracy and sensitivity of this platform for limiting dilution and digital PCR applications.

A chip-to-chip nanoliter microfluidic dispenser

A high-throughput microfluidic device is developed to handle liquid dispensation in nanoliter range. The dispenser system shows no cross-contamination between the microwells, indicating its great potential in large-scale screening experiments. An array of 115 nl PCR reactions, as well as the single channel addressable chip demonstrate the high flexibility and wide applications of this novel system.

Droplets for ultrasmall-volume analysis

By using methods that permit the generation and manipulation of ultrasmall-volume droplets, researchers are pushing the boundaries of ultrasensitive chemical analyses. (To listen to a podcast about this feature, please go to the Analytical Chemistry Web site at pubs.acs.org/ancham.).

An integrated cell culture lab on a chip: modular microdevices for cultivation of mammalian cells and delivery into microfluidic microdroplets

We present a modular system of microfluidic PDMS devices designed to incorporate the steps necessary for cell biological assays based on mammalian tissue culture 'on-chip'. The methods described herein include the on-chip immobilization and culturing of cells as well as their manipulation by transfection. Assessment of cell viability by flow cytrometry suggests low attrition rates (<3%) and excellent growth properties in the device for up to 7 days for CHO-K1 cells. To demonstrate that key procedures from the repertoire of cell biology are possible in this format, transfection of a reporter gene (encoding green fluorescent protein) was carried out. The modular design enables efficient detachment and recollection of cells and allows assessment of the success of transfection achieved on-chip. The transfection levels (20%) are comparable to standard large scale procedures and more than 500 cells could be transfected. Finally, cells are transferred into microfluidic microdoplets, where in principle a wide range of subsequent assays can be carried out at the single cell level in droplet compartments. The procedures developed for this modular device layout further demonstrate that commonly used methods in cell biology involving mammalian cells can be reliably scaled down to allow single cell investigations in picolitre volumes.

Performance of nanoliter-sized droplet-based microfluidic PCR

A microfluidic device was used to characterize PCR in aqueous-in-oil droplets for potential point-of-care applications. Droplets with a volume range of 5-250 nL can be formed on-chip reproducibly, and PCR in the droplets shows amplification efficiencies comparable to benchtop reactions with no evaporation loss. A higher polymerase concentration is required in the reaction droplet while the optimal Magnesium ion concentration is the same for both on-chip and benchtop systems. The optimal hold time is 9 s and 30 s for denaturation and annealing/extension in thermal cycling, respectively. With the optimized cycling parameters, the total reaction time is reduced to half of that required for benchtop PCR. For the droplets containing the same quantity of template DNA, the PCR yield is approximately the same with either fixed droplet size or fixed template DNA concentration. The droplet-based PCR can be monitored in real time with FRET probes, and provide amplification with a cycle threshold of ~10 cycles earlier than the benchtop instruments.

Rapid and inexpensive fabrication of polymeric microfluidic devices via toner transfer masking

An alternative fabrication method is presented for production of masters for single- or multi-layer polymeric microfluidic devices in a standard laboratory environment, precluding the need for a cleanroom. This toner transfer masking (TTM) method utilizes an office laser printer to generate a toner pattern which is thermally transferred to a metal master to serve as a mask for etching. With master fabrication times as little as one hour (depending on channel depth) using commercially-available equipment and supplies, this approach should make microfluidic technology more widely accessible to the non-expert-even the non-scientist. The cost of fabrication consumables was estimated to be < $1 per master, over an order of magnitude decrease in consumable costs compared to standard photolithography. In addition, the use of chemical etching allows accurate control over the height of raised features (i.e., channel depths), allowing the flexibility to fabricate multiple depths on a single master with little added time. Resultant devices are shown capable of pneumatic valving, three-dimensional channel formation (using layer-connecting vias), droplet fluidics, and cell imaging and staining. The multiple-depth capabilities of the method are proven useful for cellular analysis by fabrication of handheld, disposable devices used for trapping and imaging of live murine pancreatic islets. The precise fluidic control provided by the microfluidic platform allows subsequent fixing and staining of these cells without significant movement, thus spatial correlation of imaging and staining is attainable-even with rare alpha cells that constitute only approximately 10% of the islet cells.

Monodisperse droplet generation and rapid trapping for single molecule detection and reaction kinetics measurement

On-chip monodisperse droplet analysis systems are ideal for low concentration and single molecule applications because they partition reagents into identical picoliter or smaller reactor volumes that can be observed in real-time. We present a novel trapping method with droplet stopping times of approximately 38 ms that is applicable to most on-chip droplet generators. The technique greatly extends optical interrogation times without droplet motion or coalescence; and will allow on-chip single molecule detection of nanoparticle emitters with simple optics. The method maintains droplet monodispersity without chemistry-altering surfactants, and has been shown to preserve a stationary droplet stream through repetitive high-temperature thermal cycling with no additional energy input required to maintain droplet position.

Observed velocity fluctuations in monodisperse droplet generators

On-chip monodisperse droplet generation and analysis is ideal for low concentration and single molecule applications because it enables reagents to be partitioned into identical nanoliter or smaller reactor volumes while allowing real-time optical interrogation. Typically, these systems operate in a continuous droplet generation mode to maximize sample throughput. We have observed that on-chip droplet production for water-in-oil emulsions causes downstream droplet velocity fluctuations similar to those reported for gas-in-liquid emulsion systems with a periodicity equivalent to the droplet generation rate. This phenomenon can affect the accuracy of data collection due to variation in photon integration times as the moving droplets are observed. Here we perform high speed imaging and frequency domain analysis to describe the periodic velocity fluctuations due to monodisperse droplet generation.

Continuous-flow polymerase chain reaction of single-copy DNA in microfluidic microdroplets

We present a high throughput microfluidic device for continuous-flow polymerase chain reaction (PCR) in water-in-oil droplets of nanoliter volumes. The circular design of this device allows droplets to pass through alternating temperature zones and complete 34 cycles of PCR in only 17 min, avoiding temperature cycling of the entire device. The temperatures for the applied two-temperature PCR protocol can be adjusted according to requirements of template and primers. These temperatures were determined with fluorescence lifetime imaging (FLIM) inside the droplets, exploiting the temperature-dependent fluorescence lifetime of rhodamine B. The successful amplification of an 85 base-pair long template from four different start concentrations was demonstrated. Analysis of the product by gel-electrophoresis, sequencing, and real-time PCR showed that the amplification is specific and the amplification factors of up to 5 x 10(6)-fold are comparable to amplification factors obtained in a benchtop PCR machine. The high efficiency allows amplification from a single molecule of DNA per droplet. This device holds promise for convenient integration with other microfluidic devices and adds a critical missing component to the laboratory-on-a-chip toolkit.