Recent Progress in Electrochemiluminescence Sensing and Imaging

Nanomaterials-Based Electrochemiluminescence Biosensors for Food Analysis: Recent Developments and Future Directions

Developing robust and sensitive food safety detection methods is important for human health. Electrochemiluminescence (ECL) is a powerful analytical technique for complete separation of input source (electricity) and output signal (light), thereby significantly reducing background ECL signal. ECL biosensors have attracted considerable attention owing to their high sensitivity and wide dynamic range in food safety detection. In this review, we introduce the principles of ECL biosensors and common ECL luminophores, as well as the latest applications of ECL biosensors in food analysis. Further, novel nanomaterial assembly strategies have been progressively incorporated into the design of ECL biosensors, and by demonstrating some representative works, we summarize the development status of ECL biosensors in detection of mycotoxins, heavy metal ions, antibiotics, pesticide residues, foodborne pathogens, and other illegal additives. Finally, the current challenges faced by ECL biosensors are outlined and the future directions for advancing ECL research are presented.

Ultrasensitive electrochemiluminescence aptasensor based on ABEI reduced silver nanoparticles for the detection of profenofos

An ultrasensitive electrochemiluminescence (ECL) aptasensor for detection of profenofos was constructed by the reducibility and chemiluminescence property of N-(aminobutyl)-N-(ethylisoluminol) (ABEI). ABEI was used to reduce silver nitrate (AgNO₃) to silver nanoparticles (AgNPs), which could be adsorbed on the lattice of graphene oxide (GO) to form ABEI-AgNPs-GO complex. This compound could achieve excellent luminescence. The aptamer (Apt) modified (5') by sulfhydryl groups could be immobilized on AgNPs to capture profenofos. When profenofos was present, the ECL signal of the aptasensor would be weakened. To further demonstrate the successful construction of the aptasensor, cyclic voltammetry tests were performed on an electrochemical workstation and an ECL analyzer, respectively. The standard curve and specificity experiment both showed that the sensor had the advantages of low limit of detection (LOD) and good specificity. Under the optimal conditions, the aptasensor had a good linear response for profenofos in the range of 1 × 10^-1-1 × 10⁴ ng/mL. It also had a LOD of 6.7 × 10^-2 ng/mL and a correlation coefficient (R²) of 0.9991. The aptasensor had been successfully applied to the detection of profenofos in vegetables. The recovery range of the proposed ECL aptasensor was 98 % ~ 107.4 %.

Boosting the electrochemiluminescence of luminol-O2 system by high-intensity focused ultrasound

Electrochemiluminescence (ECL) of luminol is a well-established methodology in analytical chemistry and bioimaging. Developing novel strategies to enhance the ECL signal of this model emitter is a challenging but rewarding task. In this work, we introduced the high-intensity focused ultrasound (HIFU), as a pretreatment means and a non-invasive way to trigger and boost the ECL signal with a 40-fold significant enhancement in the luminol-O₂ system without the addition of exogenous co-reactants. The superoxide anion (O₂^-•) generated in situ by HIFU was the key initiator for boosting the ECL emission as demonstrated in this study for the first time. This promising co-reactant-free strategy could find potential applications for ultrasensitive ECL detection in the analysis of complex biological entities.

Inkjet-Printed Dual-Mode Electrochromic and Electroluminescent Displays Incorporating Ecofriendly Materials

Displays and indicators are an integral component of everyday electronics. However, the short lifecycle of most applications is currently contributing to the unsustainable growth of electronic waste. In this work, we utilize ecofriendly materials in combination with sustainable processing techniques to fabricate inkjet-printed, ecofriendly dual-mode displays (DMDs). These displays can be used in a reflective mode or an emissive mode by changing between DC and AC operation due to the combination of an electrochromic (EC) and electrochemiluminescent (ECL) layer in a single device. The EC polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) serves as the reflective layer, while an ECL gel made of dimethylsulfoxide (DMSO), poly(lactic-co-glycolic acid) (PLGA), 1-butyl-3-methylimidazoliumbis(oxalato)borate (BMIMBOB), and tris(bipyridine)ruthenium(II) chloride (Ru²⁺(bpy)₃Cl₂) enables the emissive mode. The final dual-mode devices exhibited their maximum optical power output of 52 mcd/m² at 4 V and 40 Hz and achieved an EC contrast of 45% and a coloration efficiency of 244 cm²/C at a wavelength of 690 nm. The fabricated devices showed clear readability in dark and light conditions when operated in reflective or emissive modes. This work demonstrates the applicability of ecofriendly and potentially biodegradable materials to reduce the amount of hazardous components in versatile display technologies.

Synthesis and comparison study of electrochemiluminescence from mononuclear and corresponding heterodinuclear Ir-Ru complexes via an amide bond as a bridge

A mononuclear iridium-based complex with a primary amine group (named Ir-NH₂), a mononuclear ruthenium-based complex with a butanoic acid group (named Ru-COOH) and the corresponding heterodinuclear complex containing an iridium and ruthenium center via an amide bond bridge (named Ir-Ru) were designed and successfully synthesized in this study. The photophysical and electrochemical properties and ECL performances of these three metal complexes under various experimental conditions were well characterized. For the first time, the insights from this comprehensive comparison study indicate that the two metal-based subunits with comparable luminescent properties are significant in the design of bimetallic-based multicolor luminophores at the molecular level, which helps us to further understand the emission performances of bimetallic complexes and to rationally design more efficient corresponding organometallic luminophores with multicolor emission for wide applications in the future.

Deciphering electrochemiluminescence generation from luminol and hydrogen peroxide by imaging light emitting layer

Electrochemiluminescence (ECL) of luminol is a luminescence process that proceeds in the presence of reactive oxygen species (e.g. hydrogen peroxide (H2O2)) at a suitable electrode potential, the reaction mechanism of which is complicated and remains ambiguous. In this work, we report a visualization approach for measuring the thickness of the ECL layer (TEL) of the luminol/H2O2 system to decipher the reaction process by combined use of the microtube electrode, ECL microscopy, and finite element simulations. With the increase of solution pH, the ECL image captured with the microtube electrode tends to vary from spot to ring, corresponding to the decrease of TEL from >9.1 μm to ca. 4.3 μm. We propose that different intermediates are involved in the course of ECL reaction. At a low pH (e.g. pH < 9), a relatively large TEL is most likely determined by the diffusion of oxidized and deprotonated luminol intermediate that is neutral and has a long lifetime. While at a high pH (e.g. pH in the range of 10 to 12), the ECL reaction is controlled by short-lived radical intermediates of both luminol and superoxide anion. The proposed mechanism is proved theoretically by finite element simulations and experimentally by the apparent effect of concentration ratio of luminol/H2O2.

Water-soluble dinuclear iridium(III) and ruthenium(II) bis-terdentate complexes: photophysics and electrochemiluminescence

The synthesis, photophysics, and electrochemiluminescence (ECL) of four water-soluble dinuclear Ir(III) and Ru(II) complexes (1-4) terminally-capped by 4'-phenyl-2,2':6',2''-terpyridine (tpy) or 1,3-di(pyrid-2-yl)-4,6-dimethylbenzene (N^C^N) ligands and linked by a 2,7-bis(2,2':6',2''-terpyridyl)fluorene with oligoether chains on C9 are reported. The impact of the tpy or N^C^N ligands and metal centers on the photophysical properties of 1-4 was assessed by spectroscopic methods including UV-vis absorption, emission, and transient absorption, and by time-dependent density functional theory (TDDFT) calculations. These complexes exhibited distinct singlet and triplet excited-state properties upon variation of the terminal-capping terdentate ligands and the metal centers. The ECL properties of complexes 1-3 with better water solubility were investigated in neutral phosphate buffer solutions (PBS) by adding tripropylamine (TPA) as a co-reactant, and the observed ECL intensity followed the descending order of 3 > 1 > 2. Complex 3 bearing the [Ru(tpy)₂]²⁺ units displayed more pronounced ECL signals, giving its analogues great potential for further ECL study.

Highly Efficient PTCA/Co3O4/CuO/S2O82- Ternary Electrochemiluminescence System Combined with a Portable Chip for Bioanalysis

Herein, we reported an efficient electrochemiluminescence (ECL) biosensor chip for sensitive detection of neuron-specific enolase (NSE). First, 3,4,9,10-perylenetetracarboxylic acid with good luminescence characteristics was used as a luminophore to obtain a stable ECL signal. Subsequently, hollow porous Co₃O₄/CuO concave polyhedron nanocages (CPNCs) were designed as co-reaction promoters to amplify the luminescence signals for highly sensitive trace detection of NSE. In brief, the rapid cyclic conversion of Co³⁺/Co²⁺ and Cu²⁺/Cu⁺ redox pairs could continuously catalyze the reduction of persulfate (S₂O₈^2-), thus providing a large number of essential active intermediates (SO₄^•-) for ECL emission. Meanwhile, the unique structure of Co₃O₄/CuO CPNCs possessed a large specific surface area, which greatly improved its catalytic efficiency. Third, NKFRGKYKC was developed as an affinity ligand for specific antibody fixation, which improved incubation efficiency and protected bioactivity of antibodies. Finally, we independently designed a microchip and applied it for ECL detection to improve the practical application ability of the sensor. The developed biosensor exhibited good sensitivity with a wide linear range (10 fg/mL to 100 ng/mL) and a low detection limit (3.42 fg/mL), which played an active role in the clinical application of sensing analysis.

Micropatterning of electrochemiluminescent polymers based on multipolar Ru-complex two-photon initiators

In this work, we present an original stereolithography strategy based on multibranched Ru-complexes with a high two-photon initiating ability allowing the 'one-pot' direct laser writing of ECL-active materials deposited onto electro-active surfaces at the μm scale.

Enhanced electrochemiluminescence at microgel-functionalized beads

Bead-based assays are successfully combined with electrochemiluminescence (ECL) technology for detection of a wide range of biomarkers. Herein, we demonstrate a novel approach to enhance the ECL signal by decorating micrometric beads with [Ru(bpy)₃]²⁺-grafted microgels (diameter ∼100 nm). Rapid and stable light emission was spatially resolved at the level of single functionalized beads. An enhancement of the ECL signal of microgel-labeled beads by 9-fold was observed in comparison to molecularly linked [Ru(bpy)₃]²⁺ beads prepared by a sandwich immunoassay or an amide bond. Imaging the ECL signal at the single bead level shows that the size of the ECL-emitting layer is extended using the microgels. The reported method offers a great promise for the optimization of bead-based ECL detection and subsequent development of ECL microscopy.

Kinetics-Based Ratiometric Electrochemiluminescence Analysis for Signal Specificity: Case Studies of Piperazine Drug Discrimination with Au Nanoclusters

A multi-parameter calibration and analysis strategy has been developed based on the kinetics of charge transfer reactions. Absolute and ratiometric electrochemiluminescence signals are elucidated from single measurements for the detection of hydroxyzine and cetirizine as prototype drugs which greatly enhance the near-infrared electrochemiluminescence from atomically precise Au₂₂ nanoclusters stabilized with lipoic acid ligands on ITO electrodes. The signal-on sensing mechanism eliminates the need for recognition elements and highly excess co-reactants in conventional electrochemiluminescence practice. The rates of sequential charge transfer reactions render specificity in electrochemiluminescence intensity and kinetics toward the target molecular/electronic structures and are conveniently controlled/optimized by operation parameters. Signal kinetic profiles, in stark contrast to steady-state or single-point recordings, not only improve the signal/noise ratio but also offer greater resolving power to differentiate analogue species and nonspecific interference. The fundamental kinetics-based ratiometric concept/strategy is not limited to a specific luminophore or a co-reactant and is thus generalizable. The case studies successfully detect and discriminate drug compounds at sub-nanomolar physiological ranges, with efficacy validated using synthetic urine toward point-of-care applications in therapeutic/abuse drug monitoring.

Recent Advances in Single Cell Analysis by Electrochemiluminescence

Understanding biological mechanisms operating in cells is one of the major goals of biology. Since heterogeneity is the fundamental property of cellular systems, single cell measurements can provide more accurate information about the composition, dynamics, and regulatory circuits of cells than population-averaged assays. Electrochemiluminescence (ECL), the light emission triggered by electrochemical reactions, is an emerging approach for single cell analysis. Numerous analytes, ranging from small biomolecules such as glucose and cholesterol, proteins and nucleic acids to subcellular structures, have been determined in single cells by ECL, which yields new insights into cellular functions. This review aims to provide an overview of research progress on ECL principles and systems for single cell analysis in recent years. The ECL reaction mechanisms are briefly introduced, and then the advances and representative works in ECL single cell analysis are summarized. Finally, outlooks and challenges in this field are addressed.

Enhancing Electrochemiluminescence Efficiency through Introducing Atomically Dispersed Ruthenium in Nickel-Based Metal-Organic Frameworks

The successful application of electrochemiluminescence (ECL) in various fields required continuous exploration of novel ECL signal emitters. In this work, we have proposed a pristine ECL luminophor named NiRu MOFs, which owned extremely high and stable ECL transmission efficiency and was synthesized via a straightforward two-step hydrothermal pathway. The foundation framework of pure Ni-MOFs with the initial structure was layered-pillared constructed by the coordinated octahedrally divalent between nickel and terephthalic acid (BDC). The terephthalates were coordinated and pillared directly to the nickel hydroxide layers and the three-dimensional framework was formed, which had a weak ECL response strength. Then, the ruthenium pyridine complex was recombined with pure Ni-MOFs to produce NiRu MOFs and part of the introduced ruthenium was atomically dispersed in the layered-pillared structure through an ion-exchange method, which led to the ECL luminous efficiency being significantly boosted more than pure Ni-MOFs. In order to verify the superiority of this newly synthesized illuminant, an ECL immunoassay model has been designed, and the results demonstrated that it had extremely strong and steady signal output in practical application. This study realized an efficient platform in ECL immunoassay application with the limit of detection of 0.32 pg mL^-1 for neuron-specific enolase (NSE). Therefore, the approach which combined the pristine pure Ni-MOFs and the star-illuminant ruthenium pyridine complex would provide a convenient and meaningful solution for exploring the next-generation ECL emitters.

Progress and Prospects of Electrochemiluminescence Biosensors Based on Porous Nanomaterials

Porous nanomaterials have attracted much attention in the field of electrochemiluminescence (ECL) analysis research because of their large specific surface area, high porosity, possession of multiple functional groups, and ease of modification. Porous nanomaterials can not only serve as good carriers for loading ECL luminophores to prepare nanomaterials with excellent luminescence properties, but they also have a good electrical conductivity to facilitate charge transfer and substance exchange between electrode surfaces and solutions. In particular, some porous nanomaterials with special functional groups or centered on metals even possess excellent catalytic properties that can enhance the ECL response of the system. ECL composites prepared based on porous nanomaterials have a wide range of applications in the field of ECL biosensors due to their extraordinary ECL response. In this paper, we reviewed recent research advances in various porous nanomaterials commonly used to fabricate ECL biosensors, such as ordered mesoporous silica (OMS), metal–organic frameworks (MOFs), covalent organic frameworks (COFs) and metal–polydopamine frameworks (MPFs). Their applications in the detection of heavy metal ions, small molecules, proteins and nucleic acids are also summarized. The challenges and prospects of constructing ECL biosensors based on porous nanomaterials are further discussed. We hope that this review will provide the reader with a comprehensive understanding of the development of porous nanomaterial-based ECL systems in analytical biosensors and materials science.

Graphdiyne: A New Carbon Allotrope for Electrochemiluminescence

Graphdiyne (GDY), a well-known 2D carbon allotrope, demonstrates increasing fantastic performance in various fields owing to its outstanding electronic properties. Owing to its unique properties, electrochemiluminescence (ECL) technology is one powerful tool for understanding fundamental questions and for ultrasensitive sensing and imaging. Here, we firstly find that GDY without any functionalization or treatment shows a strong ECL emission with potassium persulfate (K₂ S₂ O₈ ) as coreactant, which is totally different with other carbon allotropes. Mechanistic study indicates that the ECL emission of GDY is generated by the surface state transition. Interestingly, ECL is generated at 705 nm in the near infrared region with an ECL efficiency of 424 % compared to that of Ru(bpy)₃ Cl₂ /K₂ S₂ O₈ . The study demonstrates a new character of GDY in ECL investigation and sets the stage for the development of GDY for emerging applications, including imaging and light-emitting devices.

O-Fluorobenzoic Acid-Mediated Construction of Porous Graphitic Carbon Nitride with Nitrogen Defects for Multicolor Electrochemiluminescence Imaging Sensing

Graphitic carbon nitride (g-CN) is an attractive electrochemiluminescence (ECL) luminophore. However, g-CN with wavelength-tunable ECL emission is still limited, which limits its application in multicolor ECL sensing and imaging analysis. In this study, porous g-CN (PCN) with nitrogen defects was synthesized through the condensation of melamine by using o-fluorobenzoic acid (o-FBA) as an effective regulation reagent. A series of PCNs, including PCN-5%, PCN-10%, and PCN-30%, were obtained by changing the mass ratio of o-FBA and melamine. The porous structure and tunable chemical composition change of the PCNs were carefully characterized. The nitrogen defects and porous structure of the synthesized PCNs can enlarge the specific surface area, facilitate electron transfer, and generate various surface states with gradually changed energy bands, leading to wavelength-tunable multicolor ECL emissions. Accordingly, g-CN, PCN-5%, PCN-10%, and PCN-30% can generate navy blue, turquoise blue, turquoise green, and olive green ECL emissions, respectively, with the peak ECL wavelength varied from 465 to 550 nm. Then, a multicolor ECL sensing array was proposed for the discrimination of polyphenols based on the prepared g-CN and PCNs by using a smartphone as a portable detector for the first time. Five polyphenol substances including vitamin P, resveratrol, phloretin, phlorizin, and caffeic acid were discriminated by using principal component analysis and hierarchical cluster analysis. The present work provides a simple strategy to adjust the ECL wavelength of g-CN and presents a simple way to fabricate multicolor ECL sensing array, which has great application potential for multiplexed analysis and multicolor ECL imaging sensing.

Single-Atom Iron Enables Strong Low-Triggering-Potential Luminol Cathodic Electrochemiluminescence

The conventional cathodic electrochemiluminescence (ECL) always requires a more negative potential to trigger strong emission, which inevitably damages the bioactivity of targets and decreases the sensitivity and specificity. In this work, iron single-atom catalysts (Fe-N-C SACs) were employed as an efficient co-reaction accelerator for the first time to achieve the impressively cathodic emission of a luminol-H₂O₂ ECL system at an ultralow potential. Benefiting from the distinct electronic structure, Fe-N-C SACs exhibit remarkable properties for the activation of H₂O₂ to produce massive reactive oxygen species (ROS) under a negative scanning potential from 0 to -0.2 V. The ROS can oxidize the luminol anions into luminol anion radicals, avoiding the tedious electrochemical oxidation process of luminol. Then, the in situ-formed luminol anion radicals will directly react with ROS for the strong ECL emission. As a proof of concept, sensitive detection of the carcinoembryonic antigen was realized by glucose oxidase-mediated ECL immunoassay, shedding light on the superiority of SACs to construct efficient cathodic ECL systems with low triggering potential.

A novel sensor for visual and selective detection of Hg2+ based on functionalized doped quantum dots

In this paper, a novel analytical platform for the visual, sensitive and reliable analysis of mercury ions (Hg²⁺) is fabricated based on functionalized doped quantum dots. We synthesized a new specific nano-material, zinc dithiothreitol combined with graphene quantum dots (ZnNCs-NGQDs), by a simple and convenient method which, as an efficient luminophore, was then applied to construct an electrochemiluminescence (ECL) system for the first time. Under optimized conditions, the ECL sensor showed an excellent response for Hg²⁺ in the linear range of 1.0 mM to 10 pM, with a low detection limit of 3 pM. Moreover, the proposed method demonstrated satisfactory selectivity, stability and acceptable reproducibility for the detection of Hg²⁺. The recovery of tap water and lake water samples ranged from 96% to 105%, indicating the potential applicability of the proposed method for monitoring environmental water samples. Meanwhile, visual attempts for mercury ion detection by using doped quantum dots have also obtained satisfactory results. Importantly, our research revealed a viable method for improving the sensitivity and convenience of target studies in sensing fields derived from functional material design.

Wireless Anti-Stokes Photoinduced Electrochemiluminescence at Closed Semiconducting Bipolar Electrodes

Wireless electrochemical systems constitute a rapidly developing field. Herein, photoinduced electrochemiluminescence (PECL) is studied at Si-based closed bipolar electrodes (BPEs) for designing anti-Stokes systems that can convert IR into visible photons, without direct electrical contact. We show that protection of the anodic emitting pole of the BPE allows the triggering of bright and longstanding emission under the synergetic actions of an external bias and IR illumination. Photoactive n- and p-type Si BPEs are studied with front-side and back-side illumination, respectively, and nonphotoactive n⁺-Si BPEs are studied in the dark. Two electrochemiluminescent (ECL) systems ([Ru(bpy)₃]²⁺/TPrA and L-012) are tested, and we show that the onset bias and the anti-Stokes shift can be controlled by the ECL system that is employed. These advances, rationalized by simulations, will be useful for the design of original PECL systems for chemical sensing or photodetection.

Highly sensitive determination of paracetamol, uric acid, dopamine, and catechol based on flexible plastic electrochemical sensors

Flexible sensing is an alternative to traditional sensing and possesses good flexibility and wearability. Intrinsically conductive polymers, particularly poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS), have received significant attention due to their high mechanical flexibility and good biocompatibility. Here, we report the design of highly conductive and electrochemically active PEDOT:PSS-coated plastic substrate electrodes by combining N-doped graphene (NG) or S-doped graphene (SG) with methanesulfonic acid-treated PEDOT:PSS (denoted as NG-f-MSA-PEDOT:PSS/PET and SG-f-MSA-PEDOT:PSS/PET) by a simple drop-coating method. At room temperature, the NG-f-MSA-PEDOT:PSS/PET electrode demonstrated the lowest detection limits of 17.09, 33.84, 28.30, and 44.96 nM for paracetamol, uric acid, dopamine, and catechol (S/N = 3), respectively. The NG-f-MSA-PEDOT:PSS/PET electrode had good anti-interference ability and reproducibility without employing expensive noble metals and requiring much effort to polish the surface of traditional glass carbon electrodes. Most importantly, this film electrode could maintain a stable electrochemical response under different bending and crease states and had excellent mechanical stability and flexibility.

Recent progress of metal nanoclusters in electrochemiluminescence

Metal nanoclusters (MeNCs), composed of a few to hundreds of metal atoms and appropriate surface ligands, have attracted extensive interest in the electrochemiluminescence (ECL) realm owing to their molecule-like optical, electronic, and physicochemical attributes and are strongly anticipated for discrete energy levels, fascinating electrocatalytic activity, and good biocompatibility. Over the past decade, huge efforts have been devoted to the synthesis, properties, and application research of ECL-related MeNCs, and this field is still a subject of heightened concern. Therefore, this perspective aims to provide a comprehensive overview of the recent advances of MeNCs in the ECL domain, mainly covering the emerged ECL available MeNCs, unique chemical and optical properties, and the general ECL mechanisms. Synthesis strategies for desirable ECL performance are further highlighted, and the resulting ECL sensing applications utilizing MeNCs as luminophores, quenchers, and substrates are discussed systematically. Finally, we anticipate the future prospects and challenges in the development of this area.

Anti-Stokes photoinduced electrochemiluminescence at a photocathode

Anti-Stokes photoinduced electrochemiluminescence (PECL) converts infrared photons to visible photons and is usually triggered at a narrow band gap-protected photoanode. Here, we report the first example of PECL with the model [Ru(bpy)₃]²⁺/benzoyl peroxide system at a bare p-type Si photocathode. The reported PECL system, which allows a notable decrease of the cathodic potential required for ECL generation, should open new opportunities for imaging and light-addressable devices.

Simple, rapid, and visual electrochemiluminescence sensor for on-site catechol analysis

Environmental pollution caused by aromatic compounds such as catechol (Cat) has become a major issue for human health. However, there is no simple, rapid, and low-cost method for on-site monitoring of Cat. Here, based on ECL quenching mechanism, we develop a simple, rapid and visual mesoporous silica (MSNs)-electrochemiluminescence (ECL) sensor for on-site monitoring of Cat. The mechanism of ECL quenching is due to the interaction between Cat and Ru(bpy)₃^2+* and the interactions between the oxidation products of Cat and DBAE. MSNs films with ordered perpendicular mesopore channels exhibit an amplification effect of ECL intensity due to the negatively charged pore channel. There is a good linear relationship between ECL intensity and Cat concentration in the range of 10 ∼ 1000 μM with the limit of detection (LOD) of 9.518 μM (R² = 0.99). The on-site sensor is promising to offer new opportunities for pharmaceuticals analysis, on-site monitoring, and exposure risk assessment.

A simple, rapid and visual mesoporous silica (MSNs)-electrochemiluminescence (ECL) sensor was developed for on-site monitoring of Cat.

Functionalization of 2D MoS2 Nanosheets with Various Metal and Metal Oxide Nanostructures: Their Properties and Application in Electrochemical Sensors

Two-dimensional transition metal dichalcogenides (2D TMDs) have gained considerable attention due to their distinctive properties and broad range of possible applications. One of the most widely studied transition metal dichalcogenides is molybdenum disulfide (MoS₂). The 2D MoS₂ nanosheets have unique and complementary properties to those of graphene, rendering them ideal electrode materials that could potentially lead to significant benefits in many electrochemical applications. These properties include tunable bandgaps, large surface areas, relatively high electron mobilities, and good optical and catalytic characteristics. Although the use of 2D MoS₂ nanosheets offers several advantages and excellent properties, surface functionalization of 2D MoS₂ is a potential route for further enhancing their properties and adding extra functionalities to the surface of the fabricated sensor. The functionalization of the material with various metal and metal oxide nanostructures has a significant impact on its overall electrochemical performance, improving various sensing parameters, such as selectivity, sensitivity, and stability. In this review, different methods of preparing 2D-layered MoS₂ nanomaterials, followed by different surface functionalization methods of these nanomaterials, are explored and discussed. Finally, the structure-properties relationship and electrochemical sensor applications over the last ten years are discussed. Emphasis is placed on the performance of 2D MoS₂ with respect to the performance of electrochemical sensors, thereby giving new insights into this unique material and providing a foundation for researchers of different disciplines who are interested in advancing the development of MoS₂-based sensors.

Electrochemiluminescent sensor based on an aggregation-induced emission probe for bioanalytical detection

In recent years, with the rapid development of electrochemiluminescence (ECL) sensors, more luminophores have been designed to achieve high-throughput and reliable analysis. Impressively, after the proposed fantastic concept of "aggregation-induced electrochemiluminescence (AIECL)" by Cola, the application of AIECL emitters provides more abundant choices for the further improvement of ECL sensors. In this review, we briefly report the phenomenon, principle and representative applications of aggregation-induced emission (AIE) and AIECL emitters. Moreover, it is noteworthy that the cases of AIECL sensors for bioanalytical detection are summarized in detail, from 2017 to now. Finally, inspired by the applications of AIECL emitters, relevant prospects and challenges for AIECL sensors are proposed, which is of great significance for exploring more advanced bioanalytical detection technology.

Gold nanoparticle-based signal amplified electrochemiluminescence for biosensing applications

Since the content levels of biomarkers at the early stage of many diseases are generally lower than the detection threshold concentration, achieving ultrasensitive and accurate detection of these biomarkers is still one of the major goals in bio-analysis. To achieve ultrasensitive and reliable bioassay, it requires developing highly sensitive biosensors. Among all kinds of biosensors, electrogenerated chemiluminescence (ECL) based biosensors have attracted enormous attention due to their excellent properties. In order to improve the performance of ECL biosensors, gold nanoparticles (Au NPs) have been widely utilized as signal amplification tags. The introduction of Au NPs could dramatically enhance the performance of the constructed ECL biosensors via diverse ways such as electrode modification material, efficient energy acceptor in ECL resonant energy transfer (ECL-RET), reaction catalyst, surface plasmon resonance (SPR) enhancer, and as nanocarrier. Herein, we summarize recent developments and progress of ECL biosensors based on Au NPs signal amplification strategies. We will cover ECL applications of Au NPs as a signal amplification tag in the detection of proteins, metal ions, nucleic acids, small molecules, living cells, exosomes, and cell imaging. Finally, brief summary and future outlooks of this field will be presented.

Lanthanide Ce(III)/Tb(III) bimetallic coordination polymer as an advanced electrochemiluminescence emitter for epinephrine sensing application

By rationally introducing Ce(III) and Tb(III) into a coordination polymer (CP), a series of lanthanide bimetallic coordination polymers (Tb:Ce-BCPs) has been prepared in this work. Compared with pure Tb-CP and Ce-CP, bimetallic Tb:Ce-BCPs show stronger and more stable ECL intensity, which is mainly attributed to the "dual sensitization effect" combined with the energy transfer from Ce(III) to Tb(III) and the antenna effect from the ligand to the center atoms of Ce(III) and Tb(III). In the meantime, after explore the ECL intensity and morphologies of all these Tb:Ce-BCPs, the results show that the morphologies and ECL intensities of Tb:Ce-BCPs can be adjusted by doping different molar ratios of Ce(III) in Tb:Ce-BCP. Excitingly, Ce(III) can also act as a co-reaction accelerator, effectively promoting S₂O₈^2- to generate more SO₄^•-, thereby enhancing the ECL intensity of Tb:Ce-BCP. That is to say, Ce(III) plays a triple role in Tb:Ce-BCP. Furthermore, the ECL strength of Tb:Ce-BCP decreased by only 1.8% and 3.5%, respectively after the modified electrode was scanned for 800 s and stored for one month. Enlightened by the excellent ECL properties of Tb:Ce-BCP, we modified Tb:Ce-BCP directly on the surface of electrode, and explored its application in electroanalytical chemistry through the detection of epinephrine (EP) and the detection limit is 33 fmol L^-1. Significantly, our ECL sensing strategy promotes the application of lanthanides in ECL sensor and opens vast possibilities for the synthesis of a new generation of ECL emitter in electroanalytical fields.

Recent advances in nanomaterials-based optical and electrochemical aptasensors for detection of cyanotoxins

The existence of cyanotoxins poses serious threats to human health, it is highly desirable to develop specific and sensitive methods for rapid detection of cyanotoxins in food and water. Due to the distinct advantages of aptamer including high specificity, good stability and easy preparation, various aptamer-based sensors (aptasensors) have been proposed to promote the detection of cyanotoxins. In this review, we summarize recent advance in optical and electrochemical aptasensors for cyanotoxins sensing by integrating with versatile nanomaterials or innovative sensing strategies, such as colorimetric aptasensors, fluorescent aptasensors, surface enhancement Raman spectroscopy-based aptasensors, voltammetric aptasensors, electrochemical impedance spectroscopy-based aptasensors and photoelectrochemical aptasensors. We highlight the accomplishments and advancements of aptasensors with improved performance. Furthermore, the current challenges and future prospects in cyanotoxins detection are discussed from our perspectives, which we hope to provide more ideas for future researchers.

Quantum dots for electrochemiluminescence bioanalysis - A review

Electrochemiluminescence (ECL) bioanalysis has become increasingly important in various fields from bioanalysis to clinical diagnosis due to its outstanding merits, including low background signal, high sensitivity, and simple instrumentation. Quantum dots (QDs) are a significant theme in ECL bioanalysis since their excellent optical, electrochemical properties, and ease of functionalization endow them with versatile roles and new mechanisms of signal transduction in ECL. Herein, this review details recent advances of QDs-based ECL bioanalysis by using QDs as ECL emitters, coreactants, or ECL resonance energy transfer donors/acceptors, mainly focused on their optical and electrochemical properties and ECL reaction mechanism. In the end, we will discuss the current limitations and future developments in QDs ECL bioanalysis to address the requirement about selectivity, sensitivity, toxicity, and emerging applications.

Metal-Insulator-Semiconductor Anodes for Ultrastable and Site-Selective Upconversion Photoinduced Electrochemiluminescence

Photoinduced electrochemiluminescence (PECL) allows the electrochemically assisted conversion of low-energy photons into high-energy photons at an electrode surface. This concept is expected to have important implications, however, it is dramatically limited by the stability of the surface, impeding future developments. Here, a series of metal-insulator-semiconductor (MIS) junctions, using photoactive n-type Si (n-Si) as a light absorber covered by a few-nanometer-thick protective SiO_x /metal (SiO_x /M, with M=Ru, Pt, and Ir) overlayers are investigated for upconversion PECL of the model co-reactant system involving the simultaneous oxidation of tris(bipyridine)ruthenium(II) and tri-n-propylamine. We show that n-Si/SiO_x /Pt and n-Si/SiO_x /Ir exhibit high photovoltages and record stabilities in operation (35 h for n-Si/SiO_x /Ir) for the generation of intense PECL with an anti-Stokes shift of 218 nm. We also demonstrate that these surfaces can be employed for spatially localized PECL. These unprecedented performances are extremely promising for future applications of PECL.

Effective Electrochemiluminescence Aptasensor for Detection of Atrazine Residue

According to the chemiluminescence characteristics of the luminol-hydrogen peroxide (H₂O₂) system, this work designed a novel and effective electrochemiluminescence (ECL) aptasensor to detect atrazine (ATZ) rapidly. Silver nanoparticles (AgNPs) could effectively catalyze the decomposition of H₂O₂ and enhance the ECL intensity of the luminol-H₂O₂ system. Once ATZ was modified on the aptasensor, the ECL intensity was significantly weakened because of the specific combination between ATZ and its aptamer. Therefore, the changes in ECL intensity could be used to detect the concentration of ATZ. Under optimal detecting conditions, the aptasensor had a wide linear range from 1 × 10⁻³ ng/mL to 1 × 10³ ng/mL and a low limit of detection (3.3 × 10⁻⁴ ng/mL). The designed aptasensor had the advantages of good stability, reproducibility, and specificity. The aptasensor could be used to detect the ATZ content of tap water, soil, and cabbage and had satisfactory results. This work effectively constructs a novel, effective, and rapid ECL aptasensor for detecting ATZ in actual samples.

Nano-enabled sensing of per-/poly-fluoroalkyl substances (PFAS) from aqueous systems - A review

Per-/poly-fluoroalkyl substances (PFAS) are an emerging class of environmental contaminants used as an additive across various commodity and fire-retardant products, for their unique thermo-chemical stability, and to alter their surface properties towards selective liquid repellence. These properties also make PFAS highly persistent and mobile across various environmental compartments, leading to bioaccumulation, and causing acute ecotoxicity at all trophic levels particularly to human populations, thus increasing the need for monitoring at their repositories or usage sites. In this review, current nano-enabled methods towards PFAS sensing and its monitoring in wastewater are critically discussed and benchmarked against conventional detection methods. The discussion correlates the materials' properties to the sensitivity, responsiveness, and reproducibility of the sensing performance for nano-enabled sensors in currently explored electrochemical, spectrophotometric, colorimetric, optical, fluorometric, and biochemical with limits of detection of 1.02 × 10^-6 μg/L, 2.8 μg/L, 1 μg/L, 0.13 μg/L, 6.0 × 10^-5 μg/L, and 4.141 × 10^-7 μg/L respectively. The cost-effectiveness of sensing platforms plays an important role in the on-site analysis success and upscalability of nano-enabled sensors. Environmental monitoring of PFAS is a step closer to PFAS remediation. Electrochemical and biosensing methods have proven to be the most reliable tools for future PFAS sensing endeavors with very promising detection limits in an aqueous matrix, short detection times, and ease of fabrication.

A Flexible Electrochemiluminescence Sensor Equipped With Vertically Ordered Mesoporous Silica Nanochannel Film for Sensitive Detection of Clindamycin

Fast, convenient, and highly sensitive detection of antibiotic is essential to avoid its overuse and the possible harm. Owing to enrichment effect and antifouling ability of ultrasmall nanochannels, the vertically ordered mesoporous silica nanochannel film (VMSF) has great potential in the development of the facile electrochemiluminescence (ECL) sensor for direct and sensitive analysis of antibiotics in complex samples. In this study, we demonstrated a flexible ECL sensor based on a cost-effective electrode covered with a VMSF for sensitive detection of clindamycin. Polyethylene terephthalate coated with indium tin oxide (PET-ITO) is applied as a flexible electrode to grow VMSF using the electrochemically assisted self-assembly (EASA) method. The negatively charged VMSF nanochannels exhibit significant enrichment toward the commonly used cationic ECL luminophores, tris(2,2-bipyridyl) dichlororuthenium (II) (Ru (bpy)₃²⁺). Using the enhanced ECL of Ru (bpy)₃²⁺ by clindamycin, the developed VMSF/PET-ITO sensor can sensitively detect clindamycin. The responses were linear in the concentration range of 10 nM–25 μM and in the concentration range of 25–70 μM. Owing to the nanoscale thickness of the VMSF and the high coupling stability with the electrode substrate, the developed flexible VMSF/PET-ITO sensor exhibits high signal stability during the continuous bending process. Considering high antifouling characteristic of the VMSF, direct analysis of clindamycin in a real biological sample, human serum, is realized.